2 * rtc-twl.c -- TWL Real Time Clock interface
4 * Copyright (C) 2007 MontaVista Software, Inc
5 * Author: Alexandre Rusev <source@mvista.com>
7 * Based on original TI driver twl4030-rtc.c
8 * Copyright (C) 2006 Texas Instruments, Inc.
11 * Copyright (C) 2003 MontaVista Software, Inc.
12 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
13 * Copyright (C) 2006 David Brownell
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
21 #include <linux/kernel.h>
22 #include <linux/errno.h>
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/types.h>
26 #include <linux/rtc.h>
27 #include <linux/bcd.h>
28 #include <linux/platform_device.h>
29 #include <linux/interrupt.h>
31 #include <linux/i2c/twl.h>
35 * RTC block register offsets (use TWL_MODULE_RTC)
46 REG_ALARM_SECONDS_REG
,
47 REG_ALARM_MINUTES_REG
,
55 REG_RTC_INTERRUPTS_REG
,
60 static const u8 twl4030_rtc_reg_map
[] = {
61 [REG_SECONDS_REG
] = 0x00,
62 [REG_MINUTES_REG
] = 0x01,
63 [REG_HOURS_REG
] = 0x02,
64 [REG_DAYS_REG
] = 0x03,
65 [REG_MONTHS_REG
] = 0x04,
66 [REG_YEARS_REG
] = 0x05,
67 [REG_WEEKS_REG
] = 0x06,
69 [REG_ALARM_SECONDS_REG
] = 0x07,
70 [REG_ALARM_MINUTES_REG
] = 0x08,
71 [REG_ALARM_HOURS_REG
] = 0x09,
72 [REG_ALARM_DAYS_REG
] = 0x0A,
73 [REG_ALARM_MONTHS_REG
] = 0x0B,
74 [REG_ALARM_YEARS_REG
] = 0x0C,
76 [REG_RTC_CTRL_REG
] = 0x0D,
77 [REG_RTC_STATUS_REG
] = 0x0E,
78 [REG_RTC_INTERRUPTS_REG
] = 0x0F,
80 [REG_RTC_COMP_LSB_REG
] = 0x10,
81 [REG_RTC_COMP_MSB_REG
] = 0x11,
83 static const u8 twl6030_rtc_reg_map
[] = {
84 [REG_SECONDS_REG
] = 0x00,
85 [REG_MINUTES_REG
] = 0x01,
86 [REG_HOURS_REG
] = 0x02,
87 [REG_DAYS_REG
] = 0x03,
88 [REG_MONTHS_REG
] = 0x04,
89 [REG_YEARS_REG
] = 0x05,
90 [REG_WEEKS_REG
] = 0x06,
92 [REG_ALARM_SECONDS_REG
] = 0x08,
93 [REG_ALARM_MINUTES_REG
] = 0x09,
94 [REG_ALARM_HOURS_REG
] = 0x0A,
95 [REG_ALARM_DAYS_REG
] = 0x0B,
96 [REG_ALARM_MONTHS_REG
] = 0x0C,
97 [REG_ALARM_YEARS_REG
] = 0x0D,
99 [REG_RTC_CTRL_REG
] = 0x10,
100 [REG_RTC_STATUS_REG
] = 0x11,
101 [REG_RTC_INTERRUPTS_REG
] = 0x12,
103 [REG_RTC_COMP_LSB_REG
] = 0x13,
104 [REG_RTC_COMP_MSB_REG
] = 0x14,
107 /* RTC_CTRL_REG bitfields */
108 #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
109 #define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
110 #define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
111 #define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
112 #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
113 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
114 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
116 /* RTC_STATUS_REG bitfields */
117 #define BIT_RTC_STATUS_REG_RUN_M 0x02
118 #define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
119 #define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
120 #define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
121 #define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
122 #define BIT_RTC_STATUS_REG_ALARM_M 0x40
123 #define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
125 /* RTC_INTERRUPTS_REG bitfields */
126 #define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
127 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
128 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
131 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
132 #define ALL_TIME_REGS 6
134 /*----------------------------------------------------------------------*/
135 static u8
*rtc_reg_map
;
138 * Supports 1 byte read from TWL RTC register.
140 static int twl_rtc_read_u8(u8
*data
, u8 reg
)
144 ret
= twl_i2c_read_u8(TWL_MODULE_RTC
, data
, (rtc_reg_map
[reg
]));
146 pr_err("twl_rtc: Could not read TWL"
147 "register %X - error %d\n", reg
, ret
);
152 * Supports 1 byte write to TWL RTC registers.
154 static int twl_rtc_write_u8(u8 data
, u8 reg
)
158 ret
= twl_i2c_write_u8(TWL_MODULE_RTC
, data
, (rtc_reg_map
[reg
]));
160 pr_err("twl_rtc: Could not write TWL"
161 "register %X - error %d\n", reg
, ret
);
166 * Cache the value for timer/alarm interrupts register; this is
167 * only changed by callers holding rtc ops lock (or resume).
169 static unsigned char rtc_irq_bits
;
172 * Enable 1/second update and/or alarm interrupts.
174 static int set_rtc_irq_bit(unsigned char bit
)
179 val
= rtc_irq_bits
| bit
;
180 val
&= ~BIT_RTC_INTERRUPTS_REG_EVERY_M
;
181 ret
= twl_rtc_write_u8(val
, REG_RTC_INTERRUPTS_REG
);
189 * Disable update and/or alarm interrupts.
191 static int mask_rtc_irq_bit(unsigned char bit
)
196 val
= rtc_irq_bits
& ~bit
;
197 ret
= twl_rtc_write_u8(val
, REG_RTC_INTERRUPTS_REG
);
204 static int twl_rtc_alarm_irq_enable(struct device
*dev
, unsigned enabled
)
209 ret
= set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M
);
211 ret
= mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M
);
217 * Gets current TWL RTC time and date parameters.
219 * The RTC's time/alarm representation is not what gmtime(3) requires
222 * - Months are 1..12 vs Linux 0-11
223 * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
225 static int twl_rtc_read_time(struct device
*dev
, struct rtc_time
*tm
)
227 unsigned char rtc_data
[ALL_TIME_REGS
+ 1];
231 ret
= twl_rtc_read_u8(&save_control
, REG_RTC_CTRL_REG
);
235 save_control
|= BIT_RTC_CTRL_REG_GET_TIME_M
;
237 ret
= twl_rtc_write_u8(save_control
, REG_RTC_CTRL_REG
);
241 ret
= twl_i2c_read(TWL_MODULE_RTC
, rtc_data
,
242 (rtc_reg_map
[REG_SECONDS_REG
]), ALL_TIME_REGS
);
245 dev_err(dev
, "rtc_read_time error %d\n", ret
);
249 tm
->tm_sec
= bcd2bin(rtc_data
[0]);
250 tm
->tm_min
= bcd2bin(rtc_data
[1]);
251 tm
->tm_hour
= bcd2bin(rtc_data
[2]);
252 tm
->tm_mday
= bcd2bin(rtc_data
[3]);
253 tm
->tm_mon
= bcd2bin(rtc_data
[4]) - 1;
254 tm
->tm_year
= bcd2bin(rtc_data
[5]) + 100;
259 static int twl_rtc_set_time(struct device
*dev
, struct rtc_time
*tm
)
261 unsigned char save_control
;
262 unsigned char rtc_data
[ALL_TIME_REGS
+ 1];
265 rtc_data
[1] = bin2bcd(tm
->tm_sec
);
266 rtc_data
[2] = bin2bcd(tm
->tm_min
);
267 rtc_data
[3] = bin2bcd(tm
->tm_hour
);
268 rtc_data
[4] = bin2bcd(tm
->tm_mday
);
269 rtc_data
[5] = bin2bcd(tm
->tm_mon
+ 1);
270 rtc_data
[6] = bin2bcd(tm
->tm_year
- 100);
272 /* Stop RTC while updating the TC registers */
273 ret
= twl_rtc_read_u8(&save_control
, REG_RTC_CTRL_REG
);
277 save_control
&= ~BIT_RTC_CTRL_REG_STOP_RTC_M
;
278 ret
= twl_rtc_write_u8(save_control
, REG_RTC_CTRL_REG
);
282 /* update all the time registers in one shot */
283 ret
= twl_i2c_write(TWL_MODULE_RTC
, rtc_data
,
284 (rtc_reg_map
[REG_SECONDS_REG
]), ALL_TIME_REGS
);
286 dev_err(dev
, "rtc_set_time error %d\n", ret
);
291 save_control
|= BIT_RTC_CTRL_REG_STOP_RTC_M
;
292 ret
= twl_rtc_write_u8(save_control
, REG_RTC_CTRL_REG
);
299 * Gets current TWL RTC alarm time.
301 static int twl_rtc_read_alarm(struct device
*dev
, struct rtc_wkalrm
*alm
)
303 unsigned char rtc_data
[ALL_TIME_REGS
+ 1];
306 ret
= twl_i2c_read(TWL_MODULE_RTC
, rtc_data
,
307 (rtc_reg_map
[REG_ALARM_SECONDS_REG
]), ALL_TIME_REGS
);
309 dev_err(dev
, "rtc_read_alarm error %d\n", ret
);
313 /* some of these fields may be wildcard/"match all" */
314 alm
->time
.tm_sec
= bcd2bin(rtc_data
[0]);
315 alm
->time
.tm_min
= bcd2bin(rtc_data
[1]);
316 alm
->time
.tm_hour
= bcd2bin(rtc_data
[2]);
317 alm
->time
.tm_mday
= bcd2bin(rtc_data
[3]);
318 alm
->time
.tm_mon
= bcd2bin(rtc_data
[4]) - 1;
319 alm
->time
.tm_year
= bcd2bin(rtc_data
[5]) + 100;
321 /* report cached alarm enable state */
322 if (rtc_irq_bits
& BIT_RTC_INTERRUPTS_REG_IT_ALARM_M
)
328 static int twl_rtc_set_alarm(struct device
*dev
, struct rtc_wkalrm
*alm
)
330 unsigned char alarm_data
[ALL_TIME_REGS
+ 1];
333 ret
= twl_rtc_alarm_irq_enable(dev
, 0);
337 alarm_data
[1] = bin2bcd(alm
->time
.tm_sec
);
338 alarm_data
[2] = bin2bcd(alm
->time
.tm_min
);
339 alarm_data
[3] = bin2bcd(alm
->time
.tm_hour
);
340 alarm_data
[4] = bin2bcd(alm
->time
.tm_mday
);
341 alarm_data
[5] = bin2bcd(alm
->time
.tm_mon
+ 1);
342 alarm_data
[6] = bin2bcd(alm
->time
.tm_year
- 100);
344 /* update all the alarm registers in one shot */
345 ret
= twl_i2c_write(TWL_MODULE_RTC
, alarm_data
,
346 (rtc_reg_map
[REG_ALARM_SECONDS_REG
]), ALL_TIME_REGS
);
348 dev_err(dev
, "rtc_set_alarm error %d\n", ret
);
353 ret
= twl_rtc_alarm_irq_enable(dev
, 1);
358 static irqreturn_t
twl_rtc_interrupt(int irq
, void *rtc
)
360 unsigned long events
= 0;
365 res
= twl_rtc_read_u8(&rd_reg
, REG_RTC_STATUS_REG
);
369 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
370 * only one (ALARM or RTC) interrupt source may be enabled
371 * at time, we also could check our results
372 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
374 if (rd_reg
& BIT_RTC_STATUS_REG_ALARM_M
)
375 events
|= RTC_IRQF
| RTC_AF
;
377 events
|= RTC_IRQF
| RTC_UF
;
379 res
= twl_rtc_write_u8(rd_reg
| BIT_RTC_STATUS_REG_ALARM_M
,
384 if (twl_class_is_4030()) {
385 /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
386 * needs 2 reads to clear the interrupt. One read is done in
387 * do_twl_pwrirq(). Doing the second read, to clear
390 * FIXME the reason PWR_ISR1 needs an extra read is that
391 * RTC_IF retriggered until we cleared REG_ALARM_M above.
392 * But re-reading like this is a bad hack; by doing so we
393 * risk wrongly clearing status for some other IRQ (losing
394 * the interrupt). Be smarter about handling RTC_UF ...
396 res
= twl_i2c_read_u8(TWL4030_MODULE_INT
,
397 &rd_reg
, TWL4030_INT_PWR_ISR1
);
402 /* Notify RTC core on event */
403 rtc_update_irq(rtc
, 1, events
);
410 static struct rtc_class_ops twl_rtc_ops
= {
411 .read_time
= twl_rtc_read_time
,
412 .set_time
= twl_rtc_set_time
,
413 .read_alarm
= twl_rtc_read_alarm
,
414 .set_alarm
= twl_rtc_set_alarm
,
415 .alarm_irq_enable
= twl_rtc_alarm_irq_enable
,
418 /*----------------------------------------------------------------------*/
420 static int __devinit
twl_rtc_probe(struct platform_device
*pdev
)
422 struct rtc_device
*rtc
;
424 int irq
= platform_get_irq(pdev
, 0);
430 ret
= twl_rtc_read_u8(&rd_reg
, REG_RTC_STATUS_REG
);
434 if (rd_reg
& BIT_RTC_STATUS_REG_POWER_UP_M
)
435 dev_warn(&pdev
->dev
, "Power up reset detected.\n");
437 if (rd_reg
& BIT_RTC_STATUS_REG_ALARM_M
)
438 dev_warn(&pdev
->dev
, "Pending Alarm interrupt detected.\n");
440 /* Clear RTC Power up reset and pending alarm interrupts */
441 ret
= twl_rtc_write_u8(rd_reg
, REG_RTC_STATUS_REG
);
445 if (twl_class_is_6030()) {
446 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK
,
448 twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK
,
452 /* Check RTC module status, Enable if it is off */
453 ret
= twl_rtc_read_u8(&rd_reg
, REG_RTC_CTRL_REG
);
457 if (!(rd_reg
& BIT_RTC_CTRL_REG_STOP_RTC_M
)) {
458 dev_info(&pdev
->dev
, "Enabling TWL-RTC.\n");
459 rd_reg
= BIT_RTC_CTRL_REG_STOP_RTC_M
;
460 ret
= twl_rtc_write_u8(rd_reg
, REG_RTC_CTRL_REG
);
465 /* init cached IRQ enable bits */
466 ret
= twl_rtc_read_u8(&rtc_irq_bits
, REG_RTC_INTERRUPTS_REG
);
470 rtc
= rtc_device_register(pdev
->name
,
471 &pdev
->dev
, &twl_rtc_ops
, THIS_MODULE
);
474 dev_err(&pdev
->dev
, "can't register RTC device, err %ld\n",
479 ret
= request_threaded_irq(irq
, NULL
, twl_rtc_interrupt
,
481 dev_name(&rtc
->dev
), rtc
);
483 dev_err(&pdev
->dev
, "IRQ is not free.\n");
487 platform_set_drvdata(pdev
, rtc
);
491 rtc_device_unregister(rtc
);
497 * Disable all TWL RTC module interrupts.
498 * Sets status flag to free.
500 static int __devexit
twl_rtc_remove(struct platform_device
*pdev
)
502 /* leave rtc running, but disable irqs */
503 struct rtc_device
*rtc
= platform_get_drvdata(pdev
);
504 int irq
= platform_get_irq(pdev
, 0);
506 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M
);
507 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M
);
508 if (twl_class_is_6030()) {
509 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK
,
511 twl6030_interrupt_mask(TWL6030_RTC_INT_MASK
,
518 rtc_device_unregister(rtc
);
519 platform_set_drvdata(pdev
, NULL
);
523 static void twl_rtc_shutdown(struct platform_device
*pdev
)
525 /* mask timer interrupts, but leave alarm interrupts on to enable
526 power-on when alarm is triggered */
527 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M
);
532 static unsigned char irqstat
;
534 static int twl_rtc_suspend(struct platform_device
*pdev
, pm_message_t state
)
536 irqstat
= rtc_irq_bits
;
538 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M
);
542 static int twl_rtc_resume(struct platform_device
*pdev
)
544 set_rtc_irq_bit(irqstat
);
549 #define twl_rtc_suspend NULL
550 #define twl_rtc_resume NULL
553 MODULE_ALIAS("platform:twl_rtc");
555 static struct platform_driver twl4030rtc_driver
= {
556 .probe
= twl_rtc_probe
,
557 .remove
= __devexit_p(twl_rtc_remove
),
558 .shutdown
= twl_rtc_shutdown
,
559 .suspend
= twl_rtc_suspend
,
560 .resume
= twl_rtc_resume
,
562 .owner
= THIS_MODULE
,
567 static int __init
twl_rtc_init(void)
569 if (twl_class_is_4030())
570 rtc_reg_map
= (u8
*) twl4030_rtc_reg_map
;
572 rtc_reg_map
= (u8
*) twl6030_rtc_reg_map
;
574 return platform_driver_register(&twl4030rtc_driver
);
576 module_init(twl_rtc_init
);
578 static void __exit
twl_rtc_exit(void)
580 platform_driver_unregister(&twl4030rtc_driver
);
582 module_exit(twl_rtc_exit
);
584 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
585 MODULE_LICENSE("GPL");