MIPS: Lantiq: Fix external interrupt sources
[linux-2.6/linux-mips.git] / include / linux / usb / msm_hsusb.h
blob00311fe9d0df483af4c2eccf3bbb23ca4eda88b3
1 /* linux/include/asm-arm/arch-msm/hsusb.h
3 * Copyright (C) 2008 Google, Inc.
4 * Author: Brian Swetland <swetland@google.com>
5 * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
7 * This software is licensed under the terms of the GNU General Public
8 * License version 2, as published by the Free Software Foundation, and
9 * may be copied, distributed, and modified under those terms.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
18 #ifndef __ASM_ARCH_MSM_HSUSB_H
19 #define __ASM_ARCH_MSM_HSUSB_H
21 #include <linux/types.h>
22 #include <linux/usb/otg.h>
24 /**
25 * Supported USB modes
27 * USB_PERIPHERAL Only peripheral mode is supported.
28 * USB_HOST Only host mode is supported.
29 * USB_OTG OTG mode is supported.
32 enum usb_mode_type {
33 USB_NONE = 0,
34 USB_PERIPHERAL,
35 USB_HOST,
36 USB_OTG,
39 /**
40 * OTG control
42 * OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host
43 * only configuration.
44 * OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY.
45 * OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware.
46 * OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs.
49 enum otg_control_type {
50 OTG_NO_CONTROL = 0,
51 OTG_PHY_CONTROL,
52 OTG_PMIC_CONTROL,
53 OTG_USER_CONTROL,
56 /**
57 * PHY used in
59 * INVALID_PHY Unsupported PHY
60 * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY
61 * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY
64 enum msm_usb_phy_type {
65 INVALID_PHY = 0,
66 CI_45NM_INTEGRATED_PHY,
67 SNPS_28NM_INTEGRATED_PHY,
70 #define IDEV_CHG_MAX 1500
71 #define IUNIT 100
73 /**
74 * Different states involved in USB charger detection.
76 * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
77 * process is not yet started.
78 * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
79 * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
80 * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
81 * between SDP and DCP/CDP).
82 * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
83 * between DCP and CDP).
84 * USB_CHG_STATE_DETECTED USB charger type is determined.
87 enum usb_chg_state {
88 USB_CHG_STATE_UNDEFINED = 0,
89 USB_CHG_STATE_WAIT_FOR_DCD,
90 USB_CHG_STATE_DCD_DONE,
91 USB_CHG_STATE_PRIMARY_DONE,
92 USB_CHG_STATE_SECONDARY_DONE,
93 USB_CHG_STATE_DETECTED,
96 /**
97 * USB charger types
99 * USB_INVALID_CHARGER Invalid USB charger.
100 * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port
101 * on USB2.0 compliant host/hub.
102 * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger).
103 * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and
104 * IDEV_CHG_MAX can be drawn irrespective of USB state.
107 enum usb_chg_type {
108 USB_INVALID_CHARGER = 0,
109 USB_SDP_CHARGER,
110 USB_DCP_CHARGER,
111 USB_CDP_CHARGER,
115 * struct msm_otg_platform_data - platform device data
116 * for msm_otg driver.
117 * @phy_init_seq: PHY configuration sequence. val, reg pairs
118 * terminated by -1.
119 * @vbus_power: VBUS power on/off routine.
120 * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
121 * @mode: Supported mode (OTG/peripheral/host).
122 * @otg_control: OTG switch controlled by user/Id pin
123 * @default_mode: Default operational mode. Applicable only if
124 * OTG switch is controller by user.
125 * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
126 * dfab_usb_hs_clk in case of 8660 and 8960.
128 struct msm_otg_platform_data {
129 int *phy_init_seq;
130 void (*vbus_power)(bool on);
131 unsigned power_budget;
132 enum usb_mode_type mode;
133 enum otg_control_type otg_control;
134 enum usb_mode_type default_mode;
135 enum msm_usb_phy_type phy_type;
136 void (*setup_gpio)(enum usb_otg_state state);
137 char *pclk_src_name;
141 * struct msm_otg: OTG driver data. Shared by HCD and DCD.
142 * @otg: USB OTG Transceiver structure.
143 * @pdata: otg device platform data.
144 * @irq: IRQ number assigned for HSUSB controller.
145 * @clk: clock struct of usb_hs_clk.
146 * @pclk: clock struct of usb_hs_pclk.
147 * @pclk_src: pclk source for voting.
148 * @phy_reset_clk: clock struct of usb_phy_clk.
149 * @core_clk: clock struct of usb_hs_core_clk.
150 * @regs: ioremapped register base address.
151 * @inputs: OTG state machine inputs(Id, SessValid etc).
152 * @sm_work: OTG state machine work.
153 * @in_lpm: indicates low power mode (LPM) state.
154 * @async_int: Async interrupt arrived.
155 * @cur_power: The amount of mA available from downstream port.
156 * @chg_work: Charger detection work.
157 * @chg_state: The state of charger detection process.
158 * @chg_type: The type of charger attached.
159 * @dcd_retires: The retry count used to track Data contact
160 * detection process.
162 struct msm_otg {
163 struct otg_transceiver otg;
164 struct msm_otg_platform_data *pdata;
165 int irq;
166 struct clk *clk;
167 struct clk *pclk;
168 struct clk *pclk_src;
169 struct clk *phy_reset_clk;
170 struct clk *core_clk;
171 void __iomem *regs;
172 #define ID 0
173 #define B_SESS_VLD 1
174 unsigned long inputs;
175 struct work_struct sm_work;
176 atomic_t in_lpm;
177 int async_int;
178 unsigned cur_power;
179 struct delayed_work chg_work;
180 enum usb_chg_state chg_state;
181 enum usb_chg_type chg_type;
182 u8 dcd_retries;
185 #endif