1 /******************************************************************************
5 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/etherdevice.h>
31 #include <net/mac80211.h>
33 #include "iwl-eeprom.h"
38 #include "iwl-helpers.h"
40 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
41 * sending probe req. This should be set long enough to hear probe responses
42 * from more than one AP. */
43 #define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
44 #define IWL_ACTIVE_DWELL_TIME_52 (20)
46 #define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
47 #define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
49 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
50 * Must be set longer than active dwell time.
51 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
52 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
53 #define IWL_PASSIVE_DWELL_TIME_52 (10)
54 #define IWL_PASSIVE_DWELL_BASE (100)
55 #define IWL_CHANNEL_TUNE_TIME 5
57 static int iwl_send_scan_abort(struct iwl_priv
*priv
)
60 struct iwl_rx_packet
*pkt
;
61 struct iwl_host_cmd cmd
= {
62 .id
= REPLY_SCAN_ABORT_CMD
,
63 .flags
= CMD_WANT_SKB
,
66 /* Exit instantly with error when device is not ready
67 * to receive scan abort command or it does not perform
68 * hardware scan currently */
69 if (!test_bit(STATUS_READY
, &priv
->status
) ||
70 !test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) ||
71 !test_bit(STATUS_SCAN_HW
, &priv
->status
) ||
72 test_bit(STATUS_FW_ERROR
, &priv
->status
) ||
73 test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
76 ret
= iwl_send_cmd_sync(priv
, &cmd
);
80 pkt
= (struct iwl_rx_packet
*)cmd
.reply_page
;
81 if (pkt
->u
.status
!= CAN_ABORT_STATUS
) {
82 /* The scan abort will return 1 for success or
83 * 2 for "failure". A failure condition can be
84 * due to simply not being in an active scan which
85 * can occur if we send the scan abort before we
86 * the microcode has notified us that a scan is
88 IWL_DEBUG_SCAN(priv
, "SCAN_ABORT ret %d.\n", pkt
->u
.status
);
92 iwl_free_pages(priv
, cmd
.reply_page
);
96 static void iwl_complete_scan(struct iwl_priv
*priv
, bool aborted
)
98 /* check if scan was requested from mac80211 */
99 if (priv
->scan_request
) {
100 IWL_DEBUG_SCAN(priv
, "Complete scan in mac80211\n");
101 ieee80211_scan_completed(priv
->hw
, aborted
);
104 priv
->scan_type
= IWL_SCAN_NORMAL
;
105 priv
->scan_vif
= NULL
;
106 priv
->scan_request
= NULL
;
109 void iwl_force_scan_end(struct iwl_priv
*priv
)
111 lockdep_assert_held(&priv
->mutex
);
113 if (!test_bit(STATUS_SCANNING
, &priv
->status
)) {
114 IWL_DEBUG_SCAN(priv
, "Forcing scan end while not scanning\n");
118 IWL_DEBUG_SCAN(priv
, "Forcing scan end\n");
119 clear_bit(STATUS_SCANNING
, &priv
->status
);
120 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
121 clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
122 iwl_complete_scan(priv
, true);
125 static void iwl_do_scan_abort(struct iwl_priv
*priv
)
129 lockdep_assert_held(&priv
->mutex
);
131 if (!test_bit(STATUS_SCANNING
, &priv
->status
)) {
132 IWL_DEBUG_SCAN(priv
, "Not performing scan to abort\n");
136 if (test_and_set_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
137 IWL_DEBUG_SCAN(priv
, "Scan abort in progress\n");
141 ret
= iwl_send_scan_abort(priv
);
143 IWL_DEBUG_SCAN(priv
, "Send scan abort failed %d\n", ret
);
144 iwl_force_scan_end(priv
);
146 IWL_DEBUG_SCAN(priv
, "Successfully send scan abort\n");
150 * iwl_scan_cancel - Cancel any currently executing HW scan
152 int iwl_scan_cancel(struct iwl_priv
*priv
)
154 IWL_DEBUG_SCAN(priv
, "Queuing abort scan\n");
155 queue_work(priv
->workqueue
, &priv
->abort_scan
);
160 * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
161 * @ms: amount of time to wait (in milliseconds) for scan to abort
164 int iwl_scan_cancel_timeout(struct iwl_priv
*priv
, unsigned long ms
)
166 unsigned long timeout
= jiffies
+ msecs_to_jiffies(ms
);
168 lockdep_assert_held(&priv
->mutex
);
170 IWL_DEBUG_SCAN(priv
, "Scan cancel timeout\n");
172 iwl_do_scan_abort(priv
);
174 while (time_before_eq(jiffies
, timeout
)) {
175 if (!test_bit(STATUS_SCAN_HW
, &priv
->status
))
180 return test_bit(STATUS_SCAN_HW
, &priv
->status
);
183 /* Service response to REPLY_SCAN_CMD (0x80) */
184 static void iwl_rx_reply_scan(struct iwl_priv
*priv
,
185 struct iwl_rx_mem_buffer
*rxb
)
187 #ifdef CONFIG_IWLWIFI_DEBUG
188 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
189 struct iwl_scanreq_notification
*notif
=
190 (struct iwl_scanreq_notification
*)pkt
->u
.raw
;
192 IWL_DEBUG_SCAN(priv
, "Scan request status = 0x%x\n", notif
->status
);
196 /* Service SCAN_START_NOTIFICATION (0x82) */
197 static void iwl_rx_scan_start_notif(struct iwl_priv
*priv
,
198 struct iwl_rx_mem_buffer
*rxb
)
200 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
201 struct iwl_scanstart_notification
*notif
=
202 (struct iwl_scanstart_notification
*)pkt
->u
.raw
;
203 priv
->scan_start_tsf
= le32_to_cpu(notif
->tsf_low
);
204 IWL_DEBUG_SCAN(priv
, "Scan start: "
206 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
208 notif
->band
? "bg" : "a",
209 le32_to_cpu(notif
->tsf_high
),
210 le32_to_cpu(notif
->tsf_low
),
211 notif
->status
, notif
->beacon_timer
);
214 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
215 static void iwl_rx_scan_results_notif(struct iwl_priv
*priv
,
216 struct iwl_rx_mem_buffer
*rxb
)
218 #ifdef CONFIG_IWLWIFI_DEBUG
219 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
220 struct iwl_scanresults_notification
*notif
=
221 (struct iwl_scanresults_notification
*)pkt
->u
.raw
;
223 IWL_DEBUG_SCAN(priv
, "Scan ch.res: "
225 "(TSF: 0x%08X:%08X) - %d "
226 "elapsed=%lu usec\n",
228 notif
->band
? "bg" : "a",
229 le32_to_cpu(notif
->tsf_high
),
230 le32_to_cpu(notif
->tsf_low
),
231 le32_to_cpu(notif
->statistics
[0]),
232 le32_to_cpu(notif
->tsf_low
) - priv
->scan_start_tsf
);
236 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
237 static void iwl_rx_scan_complete_notif(struct iwl_priv
*priv
,
238 struct iwl_rx_mem_buffer
*rxb
)
240 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
241 struct iwl_scancomplete_notification
*scan_notif
= (void *)pkt
->u
.raw
;
243 IWL_DEBUG_SCAN(priv
, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
244 scan_notif
->scanned_channels
,
246 scan_notif
->tsf_high
, scan_notif
->status
);
248 /* The HW is no longer scanning */
249 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
251 IWL_DEBUG_SCAN(priv
, "Scan on %sGHz took %dms\n",
252 (priv
->scan_band
== IEEE80211_BAND_2GHZ
) ? "2.4" : "5.2",
253 jiffies_to_msecs(jiffies
- priv
->scan_start
));
255 queue_work(priv
->workqueue
, &priv
->scan_completed
);
257 if (priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
&&
258 iwl_advanced_bt_coexist(priv
) &&
259 priv
->bt_status
!= scan_notif
->bt_status
) {
260 if (scan_notif
->bt_status
) {
262 if (!priv
->bt_ch_announce
)
263 priv
->bt_traffic_load
=
264 IWL_BT_COEX_TRAFFIC_LOAD_HIGH
;
266 * otherwise, no traffic load information provided
271 priv
->bt_traffic_load
=
272 IWL_BT_COEX_TRAFFIC_LOAD_NONE
;
274 priv
->bt_status
= scan_notif
->bt_status
;
275 queue_work(priv
->workqueue
, &priv
->bt_traffic_change_work
);
279 void iwl_setup_rx_scan_handlers(struct iwl_priv
*priv
)
282 priv
->rx_handlers
[REPLY_SCAN_CMD
] = iwl_rx_reply_scan
;
283 priv
->rx_handlers
[SCAN_START_NOTIFICATION
] = iwl_rx_scan_start_notif
;
284 priv
->rx_handlers
[SCAN_RESULTS_NOTIFICATION
] =
285 iwl_rx_scan_results_notif
;
286 priv
->rx_handlers
[SCAN_COMPLETE_NOTIFICATION
] =
287 iwl_rx_scan_complete_notif
;
290 inline u16
iwl_get_active_dwell_time(struct iwl_priv
*priv
,
291 enum ieee80211_band band
,
294 if (band
== IEEE80211_BAND_5GHZ
)
295 return IWL_ACTIVE_DWELL_TIME_52
+
296 IWL_ACTIVE_DWELL_FACTOR_52GHZ
* (n_probes
+ 1);
298 return IWL_ACTIVE_DWELL_TIME_24
+
299 IWL_ACTIVE_DWELL_FACTOR_24GHZ
* (n_probes
+ 1);
302 u16
iwl_get_passive_dwell_time(struct iwl_priv
*priv
,
303 enum ieee80211_band band
,
304 struct ieee80211_vif
*vif
)
306 struct iwl_rxon_context
*ctx
;
307 u16 passive
= (band
== IEEE80211_BAND_2GHZ
) ?
308 IWL_PASSIVE_DWELL_BASE
+ IWL_PASSIVE_DWELL_TIME_24
:
309 IWL_PASSIVE_DWELL_BASE
+ IWL_PASSIVE_DWELL_TIME_52
;
311 if (iwl_is_any_associated(priv
)) {
313 * If we're associated, we clamp the maximum passive
314 * dwell time to be 98% of the smallest beacon interval
315 * (minus 2 * channel tune time)
317 for_each_context(priv
, ctx
) {
320 if (!iwl_is_associated_ctx(ctx
))
322 value
= ctx
->vif
? ctx
->vif
->bss_conf
.beacon_int
: 0;
323 if ((value
> IWL_PASSIVE_DWELL_BASE
) || !value
)
324 value
= IWL_PASSIVE_DWELL_BASE
;
325 value
= (value
* 98) / 100 - IWL_CHANNEL_TUNE_TIME
* 2;
326 passive
= min(value
, passive
);
333 void iwl_init_scan_params(struct iwl_priv
*priv
)
335 u8 ant_idx
= fls(priv
->hw_params
.valid_tx_ant
) - 1;
336 if (!priv
->scan_tx_ant
[IEEE80211_BAND_5GHZ
])
337 priv
->scan_tx_ant
[IEEE80211_BAND_5GHZ
] = ant_idx
;
338 if (!priv
->scan_tx_ant
[IEEE80211_BAND_2GHZ
])
339 priv
->scan_tx_ant
[IEEE80211_BAND_2GHZ
] = ant_idx
;
342 int __must_check
iwl_scan_initiate(struct iwl_priv
*priv
,
343 struct ieee80211_vif
*vif
,
344 enum iwl_scan_type scan_type
,
345 enum ieee80211_band band
)
349 lockdep_assert_held(&priv
->mutex
);
351 if (WARN_ON(!priv
->cfg
->ops
->utils
->request_scan
))
354 cancel_delayed_work(&priv
->scan_check
);
356 if (!iwl_is_ready_rf(priv
)) {
357 IWL_WARN(priv
, "Request scan called when driver not ready.\n");
361 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
363 "Multiple concurrent scan requests in parallel.\n");
367 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
368 IWL_DEBUG_SCAN(priv
, "Scan request while abort pending.\n");
372 IWL_DEBUG_SCAN(priv
, "Starting %sscan...\n",
373 scan_type
== IWL_SCAN_NORMAL
? "" :
374 scan_type
== IWL_SCAN_OFFCH_TX
? "offchan TX " :
377 set_bit(STATUS_SCANNING
, &priv
->status
);
378 priv
->scan_type
= scan_type
;
379 priv
->scan_start
= jiffies
;
380 priv
->scan_band
= band
;
382 ret
= priv
->cfg
->ops
->utils
->request_scan(priv
, vif
);
384 clear_bit(STATUS_SCANNING
, &priv
->status
);
385 priv
->scan_type
= IWL_SCAN_NORMAL
;
389 queue_delayed_work(priv
->workqueue
, &priv
->scan_check
,
390 IWL_SCAN_CHECK_WATCHDOG
);
395 int iwl_mac_hw_scan(struct ieee80211_hw
*hw
,
396 struct ieee80211_vif
*vif
,
397 struct cfg80211_scan_request
*req
)
399 struct iwl_priv
*priv
= hw
->priv
;
402 IWL_DEBUG_MAC80211(priv
, "enter\n");
404 if (req
->n_channels
== 0)
407 mutex_lock(&priv
->mutex
);
409 if (test_bit(STATUS_SCANNING
, &priv
->status
) &&
410 priv
->scan_type
!= IWL_SCAN_NORMAL
) {
411 IWL_DEBUG_SCAN(priv
, "Scan already in progress.\n");
416 /* mac80211 will only ask for one band at a time */
417 priv
->scan_request
= req
;
418 priv
->scan_vif
= vif
;
421 * If an internal scan is in progress, just set
422 * up the scan_request as per above.
424 if (priv
->scan_type
!= IWL_SCAN_NORMAL
) {
425 IWL_DEBUG_SCAN(priv
, "SCAN request during internal scan\n");
428 ret
= iwl_scan_initiate(priv
, vif
, IWL_SCAN_NORMAL
,
429 req
->channels
[0]->band
);
431 IWL_DEBUG_MAC80211(priv
, "leave\n");
434 mutex_unlock(&priv
->mutex
);
440 * internal short scan, this function should only been called while associated.
441 * It will reset and tune the radio to prevent possible RF related problem
443 void iwl_internal_short_hw_scan(struct iwl_priv
*priv
)
445 queue_work(priv
->workqueue
, &priv
->start_internal_scan
);
448 static void iwl_bg_start_internal_scan(struct work_struct
*work
)
450 struct iwl_priv
*priv
=
451 container_of(work
, struct iwl_priv
, start_internal_scan
);
453 IWL_DEBUG_SCAN(priv
, "Start internal scan\n");
455 mutex_lock(&priv
->mutex
);
457 if (priv
->scan_type
== IWL_SCAN_RADIO_RESET
) {
458 IWL_DEBUG_SCAN(priv
, "Internal scan already in progress\n");
462 if (test_bit(STATUS_SCANNING
, &priv
->status
)) {
463 IWL_DEBUG_SCAN(priv
, "Scan already in progress.\n");
467 if (iwl_scan_initiate(priv
, NULL
, IWL_SCAN_RADIO_RESET
, priv
->band
))
468 IWL_DEBUG_SCAN(priv
, "failed to start internal short scan\n");
470 mutex_unlock(&priv
->mutex
);
473 static void iwl_bg_scan_check(struct work_struct
*data
)
475 struct iwl_priv
*priv
=
476 container_of(data
, struct iwl_priv
, scan_check
.work
);
478 IWL_DEBUG_SCAN(priv
, "Scan check work\n");
480 /* Since we are here firmware does not finish scan and
481 * most likely is in bad shape, so we don't bother to
482 * send abort command, just force scan complete to mac80211 */
483 mutex_lock(&priv
->mutex
);
484 iwl_force_scan_end(priv
);
485 mutex_unlock(&priv
->mutex
);
489 * iwl_fill_probe_req - fill in all required fields and IE for probe request
492 u16
iwl_fill_probe_req(struct iwl_priv
*priv
, struct ieee80211_mgmt
*frame
,
493 const u8
*ta
, const u8
*ies
, int ie_len
, int left
)
498 /* Make sure there is enough space for the probe request,
499 * two mandatory IEs and the data */
504 frame
->frame_control
= cpu_to_le16(IEEE80211_STYPE_PROBE_REQ
);
505 memcpy(frame
->da
, iwl_bcast_addr
, ETH_ALEN
);
506 memcpy(frame
->sa
, ta
, ETH_ALEN
);
507 memcpy(frame
->bssid
, iwl_bcast_addr
, ETH_ALEN
);
513 pos
= &frame
->u
.probe_req
.variable
[0];
515 /* fill in our indirect SSID IE */
519 *pos
++ = WLAN_EID_SSID
;
524 if (WARN_ON(left
< ie_len
))
528 memcpy(pos
, ies
, ie_len
);
535 static void iwl_bg_abort_scan(struct work_struct
*work
)
537 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
, abort_scan
);
539 IWL_DEBUG_SCAN(priv
, "Abort scan work\n");
541 /* We keep scan_check work queued in case when firmware will not
542 * report back scan completed notification */
543 mutex_lock(&priv
->mutex
);
544 iwl_scan_cancel_timeout(priv
, 200);
545 mutex_unlock(&priv
->mutex
);
548 static void iwl_bg_scan_completed(struct work_struct
*work
)
550 struct iwl_priv
*priv
=
551 container_of(work
, struct iwl_priv
, scan_completed
);
554 IWL_DEBUG_SCAN(priv
, "Completed scan.\n");
556 cancel_delayed_work(&priv
->scan_check
);
558 mutex_lock(&priv
->mutex
);
560 aborted
= test_and_clear_bit(STATUS_SCAN_ABORTING
, &priv
->status
);
562 IWL_DEBUG_SCAN(priv
, "Aborted scan completed.\n");
564 if (!test_and_clear_bit(STATUS_SCANNING
, &priv
->status
)) {
565 IWL_DEBUG_SCAN(priv
, "Scan already completed.\n");
569 if (priv
->scan_type
== IWL_SCAN_OFFCH_TX
&& priv
->_agn
.offchan_tx_skb
) {
570 ieee80211_tx_status_irqsafe(priv
->hw
,
571 priv
->_agn
.offchan_tx_skb
);
572 priv
->_agn
.offchan_tx_skb
= NULL
;
575 if (priv
->scan_type
!= IWL_SCAN_NORMAL
&& !aborted
) {
578 /* Check if mac80211 requested scan during our internal scan */
579 if (priv
->scan_request
== NULL
)
582 /* If so request a new scan */
583 err
= iwl_scan_initiate(priv
, priv
->scan_vif
, IWL_SCAN_NORMAL
,
584 priv
->scan_request
->channels
[0]->band
);
587 "failed to initiate pending scan: %d\n", err
);
596 iwl_complete_scan(priv
, aborted
);
599 /* Can we still talk to firmware ? */
600 if (!iwl_is_ready_rf(priv
))
604 * We do not commit power settings while scan is pending,
605 * do it now if the settings changed.
607 iwl_power_set_mode(priv
, &priv
->power_data
.sleep_cmd_next
, false);
608 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
610 priv
->cfg
->ops
->utils
->post_scan(priv
);
613 mutex_unlock(&priv
->mutex
);
616 void iwl_setup_scan_deferred_work(struct iwl_priv
*priv
)
618 INIT_WORK(&priv
->scan_completed
, iwl_bg_scan_completed
);
619 INIT_WORK(&priv
->abort_scan
, iwl_bg_abort_scan
);
620 INIT_WORK(&priv
->start_internal_scan
, iwl_bg_start_internal_scan
);
621 INIT_DELAYED_WORK(&priv
->scan_check
, iwl_bg_scan_check
);
624 void iwl_cancel_scan_deferred_work(struct iwl_priv
*priv
)
626 cancel_work_sync(&priv
->start_internal_scan
);
627 cancel_work_sync(&priv
->abort_scan
);
628 cancel_work_sync(&priv
->scan_completed
);
630 if (cancel_delayed_work_sync(&priv
->scan_check
)) {
631 mutex_lock(&priv
->mutex
);
632 iwl_force_scan_end(priv
);
633 mutex_unlock(&priv
->mutex
);