MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check

[linux-2.6/linux-mips.git] / arch / arm / mach-mx5 / mx51_efika.c

/*
 * based on code from the following
 * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
 * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
 * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13892.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>

#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>

#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <mach/ulpi.h>

#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>

#include "devices-imx51.h"
#include "efika.h"
#include "cpu_op-mx51.h"

#define MX51_USB_CTRL_1_OFFSET          0x10
#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
#define MX51_USB_PLL_DIV_19_2_MHZ       0x01

#define EFIKAMX_USB_HUB_RESET   IMX_GPIO_NR(1, 5)
#define EFIKAMX_USBH1_STP       IMX_GPIO_NR(1, 27)

#define EFIKAMX_SPI_CS0         IMX_GPIO_NR(4, 24)
#define EFIKAMX_SPI_CS1         IMX_GPIO_NR(4, 25)

#define EFIKAMX_PMIC            IMX_GPIO_NR(1, 6)

static iomux_v3_cfg_t mx51efika_pads[] = {
        /* UART1 */
        MX51_PAD_UART1_RXD__UART1_RXD,
        MX51_PAD_UART1_TXD__UART1_TXD,
        MX51_PAD_UART1_RTS__UART1_RTS,
        MX51_PAD_UART1_CTS__UART1_CTS,

        /* SD 1 */
        MX51_PAD_SD1_CMD__SD1_CMD,
        MX51_PAD_SD1_CLK__SD1_CLK,
        MX51_PAD_SD1_DATA0__SD1_DATA0,
        MX51_PAD_SD1_DATA1__SD1_DATA1,
        MX51_PAD_SD1_DATA2__SD1_DATA2,
        MX51_PAD_SD1_DATA3__SD1_DATA3,

        /* SD 2 */
        MX51_PAD_SD2_CMD__SD2_CMD,
        MX51_PAD_SD2_CLK__SD2_CLK,
        MX51_PAD_SD2_DATA0__SD2_DATA0,
        MX51_PAD_SD2_DATA1__SD2_DATA1,
        MX51_PAD_SD2_DATA2__SD2_DATA2,
        MX51_PAD_SD2_DATA3__SD2_DATA3,

        /* SD/MMC WP/CD */
        MX51_PAD_GPIO1_0__SD1_CD,
        MX51_PAD_GPIO1_1__SD1_WP,
        MX51_PAD_GPIO1_7__SD2_WP,
        MX51_PAD_GPIO1_8__SD2_CD,

        /* spi */
        MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
        MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
        MX51_PAD_CSPI1_SS0__GPIO4_24,
        MX51_PAD_CSPI1_SS1__GPIO4_25,
        MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
        MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
        MX51_PAD_GPIO1_6__GPIO1_6,

        /* USB HOST1 */
        MX51_PAD_USBH1_CLK__USBH1_CLK,
        MX51_PAD_USBH1_DIR__USBH1_DIR,
        MX51_PAD_USBH1_NXT__USBH1_NXT,
        MX51_PAD_USBH1_DATA0__USBH1_DATA0,
        MX51_PAD_USBH1_DATA1__USBH1_DATA1,
        MX51_PAD_USBH1_DATA2__USBH1_DATA2,
        MX51_PAD_USBH1_DATA3__USBH1_DATA3,
        MX51_PAD_USBH1_DATA4__USBH1_DATA4,
        MX51_PAD_USBH1_DATA5__USBH1_DATA5,
        MX51_PAD_USBH1_DATA6__USBH1_DATA6,
        MX51_PAD_USBH1_DATA7__USBH1_DATA7,

        /* USB HUB RESET */
        MX51_PAD_GPIO1_5__GPIO1_5,

        /* WLAN */
        MX51_PAD_EIM_A22__GPIO2_16,
        MX51_PAD_EIM_A16__GPIO2_10,

        /* USB PHY RESET */
        MX51_PAD_EIM_D27__GPIO2_9,
};

/* Serial ports */
static const struct imxuart_platform_data uart_pdata = {
        .flags = IMXUART_HAVE_RTSCTS,
};

/* This function is board specific as the bit mask for the plldiv will also
 * be different for other Freescale SoCs, thus a common bitmask is not
 * possible and cannot get place in /plat-mxc/ehci.c.
 */
static int initialize_otg_port(struct platform_device *pdev)
{
        u32 v;
        void __iomem *usb_base;
        void __iomem *usbother_base;
        usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
        if (!usb_base)
                return -ENOMEM;
        usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);

        /* Set the PHY clock to 19.2MHz */
        v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
        v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
        v |= MX51_USB_PLL_DIV_19_2_MHZ;
        __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
        iounmap(usb_base);

        mdelay(10);

        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}

static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
        .init   = initialize_otg_port,
        .portsc = MXC_EHCI_UTMI_16BIT,
};

static int initialize_usbh1_port(struct platform_device *pdev)
{
        iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
        iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
        u32 v;
        void __iomem *usb_base;
        void __iomem *socregs_base;

        mxc_iomux_v3_setup_pad(usbh1gpio);
        gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
        gpio_direction_output(EFIKAMX_USBH1_STP, 0);
        msleep(1);
        gpio_set_value(EFIKAMX_USBH1_STP, 1);
        msleep(1);

        usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
        socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);

        /* The clock for the USBH1 ULPI port will come externally */
        /* from the PHY. */
        v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
        __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
                        socregs_base + MX51_USB_CTRL_1_OFFSET);

        iounmap(usb_base);

        gpio_free(EFIKAMX_USBH1_STP);
        mxc_iomux_v3_setup_pad(usbh1stp);

        mdelay(10);

        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}

static struct mxc_usbh_platform_data usbh1_config __initdata = {
        .init   = initialize_usbh1_port,
        .portsc = MXC_EHCI_MODE_ULPI,
};

static void mx51_efika_hubreset(void)
{
        gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
        gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
        msleep(1);
        gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
        msleep(1);
        gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
}

static void __init mx51_efika_usb(void)
{
        mx51_efika_hubreset();

        /* pulling it low, means no USB at all... */
        gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
        gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
        msleep(1);
        gpio_set_value(EFIKA_USB_PHY_RESET, 1);

        usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
                        ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);

        imx51_add_mxc_ehci_otg(&dr_utmi_config);
        if (usbh1_config.otg)
                imx51_add_mxc_ehci_hs(1, &usbh1_config);
}

static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
        {
         .name = "u-boot",
         .offset = 0,
         .size = SZ_256K,
        },
        {
          .name = "config",
          .offset = MTDPART_OFS_APPEND,
          .size = SZ_64K,
        },
};

static struct flash_platform_data mx51_efika_spi_flash_data = {
        .name           = "spi_flash",
        .parts          = mx51_efika_spi_nor_partitions,
        .nr_parts       = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
        .type           = "sst25vf032b",
};

static struct regulator_consumer_supply sw1_consumers[] = {
        {
                .supply = "cpu_vcc",
        }
};

static struct regulator_consumer_supply vdig_consumers[] = {
        /* sgtl5000 */
        REGULATOR_SUPPLY("VDDA", "1-000a"),
        REGULATOR_SUPPLY("VDDD", "1-000a"),
};

static struct regulator_consumer_supply vvideo_consumers[] = {
        /* sgtl5000 */
        REGULATOR_SUPPLY("VDDIO", "1-000a"),
};

static struct regulator_consumer_supply vsd_consumers[] = {
        REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
        REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
};

static struct regulator_consumer_supply pwgt1_consumer[] = {
        {
                .supply = "pwgt1",
        }
};

static struct regulator_consumer_supply pwgt2_consumer[] = {
        {
                .supply = "pwgt2",
        }
};

static struct regulator_consumer_supply coincell_consumer[] = {
        {
                .supply = "coincell",
        }
};

static struct regulator_init_data sw1_init = {
        .constraints = {
                .name = "SW1",
                .min_uV = 600000,
                .max_uV = 1375000,
                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                .valid_modes_mask = 0,
                .always_on = 1,
                .boot_on = 1,
                .state_mem = {
                        .uV = 850000,
                        .mode = REGULATOR_MODE_NORMAL,
                        .enabled = 1,
                },
        },
        .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
        .consumer_supplies = sw1_consumers,
};

static struct regulator_init_data sw2_init = {
        .constraints = {
                .name = "SW2",
                .min_uV = 900000,
                .max_uV = 1850000,
                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                .always_on = 1,
                .boot_on = 1,
                .state_mem = {
                        .uV = 950000,
                        .mode = REGULATOR_MODE_NORMAL,
                        .enabled = 1,
                },
        }
};

static struct regulator_init_data sw3_init = {
        .constraints = {
                .name = "SW3",
                .min_uV = 1100000,
                .max_uV = 1850000,
                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                .always_on = 1,
                .boot_on = 1,
        }
};

static struct regulator_init_data sw4_init = {
        .constraints = {
                .name = "SW4",
                .min_uV = 1100000,
                .max_uV = 1850000,
                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                .always_on = 1,
                .boot_on = 1,
        }
};

static struct regulator_init_data viohi_init = {
        .constraints = {
                .name = "VIOHI",
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data vusb_init = {
        .constraints = {
                .name = "VUSB",
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data swbst_init = {
        .constraints = {
                .name = "SWBST",
        }
};

static struct regulator_init_data vdig_init = {
        .constraints = {
                .name = "VDIG",
                .min_uV = 1050000,
                .max_uV = 1800000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
                .always_on = 1,
        },
        .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
        .consumer_supplies = vdig_consumers,
};

static struct regulator_init_data vpll_init = {
        .constraints = {
                .name = "VPLL",
                .min_uV = 1050000,
                .max_uV = 1800000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data vusb2_init = {
        .constraints = {
                .name = "VUSB2",
                .min_uV = 2400000,
                .max_uV = 2775000,
                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data vvideo_init = {
        .constraints = {
                .name = "VVIDEO",
                .min_uV = 2775000,
                .max_uV = 2775000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
                .apply_uV = 1,
        },
        .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
        .consumer_supplies = vvideo_consumers,
};

static struct regulator_init_data vaudio_init = {
        .constraints = {
                .name = "VAUDIO",
                .min_uV = 2300000,
                .max_uV = 3000000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
        }
};

static struct regulator_init_data vsd_init = {
        .constraints = {
                .name = "VSD",
                .min_uV = 1800000,
                .max_uV = 3150000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE,
                .boot_on = 1,
        },
        .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
        .consumer_supplies = vsd_consumers,
};

static struct regulator_init_data vcam_init = {
        .constraints = {
                .name = "VCAM",
                .min_uV = 2500000,
                .max_uV = 3000000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE |
                        REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
                .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
                .boot_on = 1,
        }
};

static struct regulator_init_data vgen1_init = {
        .constraints = {
                .name = "VGEN1",
                .min_uV = 1200000,
                .max_uV = 3150000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data vgen2_init = {
        .constraints = {
                .name = "VGEN2",
                .min_uV = 1200000,
                .max_uV = 3150000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data vgen3_init = {
        .constraints = {
                .name = "VGEN3",
                .min_uV = 1800000,
                .max_uV = 2900000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
                .boot_on = 1,
                .always_on = 1,
        }
};

static struct regulator_init_data gpo1_init = {
        .constraints = {
                .name = "GPO1",
        }
};

static struct regulator_init_data gpo2_init = {
        .constraints = {
                .name = "GPO2",
        }
};

static struct regulator_init_data gpo3_init = {
        .constraints = {
                .name = "GPO3",
        }
};

static struct regulator_init_data gpo4_init = {
        .constraints = {
                .name = "GPO4",
        }
};

static struct regulator_init_data pwgt1_init = {
        .constraints = {
                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                .boot_on        = 1,
        },
        .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
        .consumer_supplies = pwgt1_consumer,
};

static struct regulator_init_data pwgt2_init = {
        .constraints = {
                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                .boot_on        = 1,
        },
        .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
        .consumer_supplies = pwgt2_consumer,
};

static struct regulator_init_data vcoincell_init = {
        .constraints = {
                .name = "COINCELL",
                .min_uV = 3000000,
                .max_uV = 3000000,
                .valid_ops_mask =
                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
        },
        .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
        .consumer_supplies = coincell_consumer,
};

static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
        { .id = MC13892_SW1,            .init_data =  &sw1_init },
        { .id = MC13892_SW2,            .init_data =  &sw2_init },
        { .id = MC13892_SW3,            .init_data =  &sw3_init },
        { .id = MC13892_SW4,            .init_data =  &sw4_init },
        { .id = MC13892_SWBST,          .init_data =  &swbst_init },
        { .id = MC13892_VIOHI,          .init_data =  &viohi_init },
        { .id = MC13892_VPLL,           .init_data =  &vpll_init },
        { .id = MC13892_VDIG,           .init_data =  &vdig_init },
        { .id = MC13892_VSD,            .init_data =  &vsd_init },
        { .id = MC13892_VUSB2,          .init_data =  &vusb2_init },
        { .id = MC13892_VVIDEO,         .init_data =  &vvideo_init },
        { .id = MC13892_VAUDIO,         .init_data =  &vaudio_init },
        { .id = MC13892_VCAM,           .init_data =  &vcam_init },
        { .id = MC13892_VGEN1,          .init_data =  &vgen1_init },
        { .id = MC13892_VGEN2,          .init_data =  &vgen2_init },
        { .id = MC13892_VGEN3,          .init_data =  &vgen3_init },
        { .id = MC13892_VUSB,           .init_data =  &vusb_init },
        { .id = MC13892_GPO1,           .init_data =  &gpo1_init },
        { .id = MC13892_GPO2,           .init_data =  &gpo2_init },
        { .id = MC13892_GPO3,           .init_data =  &gpo3_init },
        { .id = MC13892_GPO4,           .init_data =  &gpo4_init },
        { .id = MC13892_PWGT1SPI,       .init_data = &pwgt1_init },
        { .id = MC13892_PWGT2SPI,       .init_data = &pwgt2_init },
        { .id = MC13892_VCOINCELL,      .init_data = &vcoincell_init },
};

static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
        .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
        .regulators = {
                .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
                .regulators = mx51_efika_regulators,
        },
};

static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
        {
                .modalias = "m25p80",
                .max_speed_hz = 25000000,
                .bus_num = 0,
                .chip_select = 1,
                .platform_data = &mx51_efika_spi_flash_data,
                .irq = -1,
        },
        {
                .modalias = "mc13892",
                .max_speed_hz = 1000000,
                .bus_num = 0,
                .chip_select = 0,
                .platform_data = &mx51_efika_mc13892_data,
                .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
        },
};

static int mx51_efika_spi_cs[] = {
        EFIKAMX_SPI_CS0,
        EFIKAMX_SPI_CS1,
};

static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
        .chipselect     = mx51_efika_spi_cs,
        .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
};

void __init efika_board_common_init(void)
{
        mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
                                        ARRAY_SIZE(mx51efika_pads));
        imx51_add_imx_uart(0, &uart_pdata);
        mx51_efika_usb();

        /* FIXME: comes from original code. check this. */
        if (mx51_revision() < IMX_CHIP_REVISION_2_0)
                sw2_init.constraints.state_mem.uV = 1100000;
        else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
                sw2_init.constraints.state_mem.uV = 1250000;
                sw1_init.constraints.state_mem.uV = 1000000;
        }
        if (machine_is_mx51_efikasb())
                vgen1_init.constraints.max_uV = 1200000;

        gpio_request(EFIKAMX_PMIC, "pmic irq");
        gpio_direction_input(EFIKAMX_PMIC);
        spi_register_board_info(mx51_efika_spi_board_info,
                ARRAY_SIZE(mx51_efika_spi_board_info));
        imx51_add_ecspi(0, &mx51_efika_spi_pdata);

        imx51_add_pata_imx();

#if defined(CONFIG_CPU_FREQ_IMX)
        get_cpu_op = mx51_get_cpu_op;
#endif
}