arch/arm/plat-omap/include/plat/omap_hwmod.h

   1 /*
   2  * omap_hwmod macros, structures
   3  *
   4  * Copyright (C) 2009-2011 Nokia Corporation
   5  * Copyright (C) 2011 Texas Instruments, Inc.
   6  * Paul Walmsley
   7  *
   8  * Created in collaboration with (alphabetical order): Benoît Cousson,
   9  * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
  10  * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  *
  16  * These headers and macros are used to define OMAP on-chip module
  17  * data and their integration with other OMAP modules and Linux.
  18  * Copious documentation and references can also be found in the
  19  * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
  20  * writing).
  21  *
  22  * To do:
  23  * - add interconnect error log structures
  24  * - add pinmuxing
  25  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  26  * - implement default hwmod SMS/SDRC flags?
  27  * - move Linux-specific data ("non-ROM data") out
  28  *
  29  */
  30 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
  31 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
  32
  33 #include <linux/kernel.h>
  34 #include <linux/init.h>
  35 #include <linux/list.h>
  36 #include <linux/ioport.h>
  37 #include <linux/spinlock.h>
  38 #include <plat/cpu.h>
  39
  40 struct omap_device;
  41
  42 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
  43 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
  44
  45 /*
  46  * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
  47  * with the original PRCM protocol defined for OMAP2420
  48  */
  49 #define SYSC_TYPE1_MIDLEMODE_SHIFT      12
  50 #define SYSC_TYPE1_MIDLEMODE_MASK       (0x3 << SYSC_MIDLEMODE_SHIFT)
  51 #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT  8
  52 #define SYSC_TYPE1_CLOCKACTIVITY_MASK   (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
  53 #define SYSC_TYPE1_SIDLEMODE_SHIFT      3
  54 #define SYSC_TYPE1_SIDLEMODE_MASK       (0x3 << SYSC_SIDLEMODE_SHIFT)
  55 #define SYSC_TYPE1_ENAWAKEUP_SHIFT      2
  56 #define SYSC_TYPE1_ENAWAKEUP_MASK       (1 << SYSC_ENAWAKEUP_SHIFT)
  57 #define SYSC_TYPE1_SOFTRESET_SHIFT      1
  58 #define SYSC_TYPE1_SOFTRESET_MASK       (1 << SYSC_SOFTRESET_SHIFT)
  59 #define SYSC_TYPE1_AUTOIDLE_SHIFT       0
  60 #define SYSC_TYPE1_AUTOIDLE_MASK        (1 << SYSC_AUTOIDLE_SHIFT)
  61
  62 /*
  63  * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
  64  * with the new PRCM protocol defined for new OMAP4 IPs.
  65  */
  66 #define SYSC_TYPE2_SOFTRESET_SHIFT      0
  67 #define SYSC_TYPE2_SOFTRESET_MASK       (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
  68 #define SYSC_TYPE2_SIDLEMODE_SHIFT      2
  69 #define SYSC_TYPE2_SIDLEMODE_MASK       (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
  70 #define SYSC_TYPE2_MIDLEMODE_SHIFT      4
  71 #define SYSC_TYPE2_MIDLEMODE_MASK       (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
  72
  73 /* OCP SYSSTATUS bit shifts/masks */
  74 #define SYSS_RESETDONE_SHIFT            0
  75 #define SYSS_RESETDONE_MASK             (1 << SYSS_RESETDONE_SHIFT)
  76
  77 /* Master standby/slave idle mode flags */
  78 #define HWMOD_IDLEMODE_FORCE            (1 << 0)
  79 #define HWMOD_IDLEMODE_NO               (1 << 1)
  80 #define HWMOD_IDLEMODE_SMART            (1 << 2)
  81 #define HWMOD_IDLEMODE_SMART_WKUP       (1 << 3)
  82
  83 /* modulemode control type (SW or HW) */
  84 #define MODULEMODE_HWCTRL               1
  85 #define MODULEMODE_SWCTRL               2
  86
  87
  88 /**
  89  * struct omap_hwmod_mux_info - hwmod specific mux configuration
  90  * @pads:              array of omap_device_pad entries
  91  * @nr_pads:           number of omap_device_pad entries
  92  *
  93  * Note that this is currently built during init as needed.
  94  */
  95 struct omap_hwmod_mux_info {
  96         int                             nr_pads;
  97         struct omap_device_pad          *pads;
  98         int                             nr_pads_dynamic;
  99         struct omap_device_pad          **pads_dynamic;
 100         bool                            enabled;
 101 };
 102
 103 /**
 104  * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
 105  * @name: name of the IRQ channel (module local name)
 106  * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
 107  *
 108  * @name should be something short, e.g., "tx" or "rx".  It is for use
 109  * by platform_get_resource_byname().  It is defined locally to the
 110  * hwmod.
 111  */
 112 struct omap_hwmod_irq_info {
 113         const char      *name;
 114         s16             irq;
 115 };
 116
 117 /**
 118  * struct omap_hwmod_dma_info - DMA channels used by the hwmod
 119  * @name: name of the DMA channel (module local name)
 120  * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
 121  *
 122  * @name should be something short, e.g., "tx" or "rx".  It is for use
 123  * by platform_get_resource_byname().  It is defined locally to the
 124  * hwmod.
 125  */
 126 struct omap_hwmod_dma_info {
 127         const char      *name;
 128         s16             dma_req;
 129 };
 130
 131 /**
 132  * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
 133  * @name: name of the reset line (module local name)
 134  * @rst_shift: Offset of the reset bit
 135  * @st_shift: Offset of the reset status bit (OMAP2/3 only)
 136  *
 137  * @name should be something short, e.g., "cpu0" or "rst". It is defined
 138  * locally to the hwmod.
 139  */
 140 struct omap_hwmod_rst_info {
 141         const char      *name;
 142         u8              rst_shift;
 143         u8              st_shift;
 144 };
 145
 146 /**
 147  * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
 148  * @role: "sys", "32k", "tv", etc -- for use in clk_get()
 149  * @clk: opt clock: OMAP clock name
 150  * @_clk: pointer to the struct clk (filled in at runtime)
 151  *
 152  * The module's interface clock and main functional clock should not
 153  * be added as optional clocks.
 154  */
 155 struct omap_hwmod_opt_clk {
 156         const char      *role;
 157         const char      *clk;
 158         struct clk      *_clk;
 159 };
 160
 161
 162 /* omap_hwmod_omap2_firewall.flags bits */
 163 #define OMAP_FIREWALL_L3                (1 << 0)
 164 #define OMAP_FIREWALL_L4                (1 << 1)
 165
 166 /**
 167  * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
 168  * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
 169  * @l4_fw_region: L4 firewall region ID
 170  * @l4_prot_group: L4 protection group ID
 171  * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
 172  */
 173 struct omap_hwmod_omap2_firewall {
 174         u8 l3_perm_bit;
 175         u8 l4_fw_region;
 176         u8 l4_prot_group;
 177         u8 flags;
 178 };
 179
 180
 181 /*
 182  * omap_hwmod_addr_space.flags bits
 183  *
 184  * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
 185  * ADDR_TYPE_RT: Address space contains module register target data.
 186  */
 187 #define ADDR_MAP_ON_INIT        (1 << 0)        /* XXX does not belong */
 188 #define ADDR_TYPE_RT            (1 << 1)
 189
 190 /**
 191  * struct omap_hwmod_addr_space - address space handled by the hwmod
 192  * @name: name of the address space
 193  * @pa_start: starting physical address
 194  * @pa_end: ending physical address
 195  * @flags: (see omap_hwmod_addr_space.flags macros above)
 196  *
 197  * Address space doesn't necessarily follow physical interconnect
 198  * structure.  GPMC is one example.
 199  */
 200 struct omap_hwmod_addr_space {
 201         const char *name;
 202         u32 pa_start;
 203         u32 pa_end;
 204         u8 flags;
 205 };
 206
 207
 208 /*
 209  * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
 210  * interface to interact with the hwmod.  Used to add sleep dependencies
 211  * when the module is enabled or disabled.
 212  */
 213 #define OCP_USER_MPU                    (1 << 0)
 214 #define OCP_USER_SDMA                   (1 << 1)
 215
 216 /* omap_hwmod_ocp_if.flags bits */
 217 #define OCPIF_SWSUP_IDLE                (1 << 0)
 218 #define OCPIF_CAN_BURST                 (1 << 1)
 219
 220 /**
 221  * struct omap_hwmod_ocp_if - OCP interface data
 222  * @master: struct omap_hwmod that initiates OCP transactions on this link
 223  * @slave: struct omap_hwmod that responds to OCP transactions on this link
 224  * @addr: address space associated with this link
 225  * @clk: interface clock: OMAP clock name
 226  * @_clk: pointer to the interface struct clk (filled in at runtime)
 227  * @fw: interface firewall data
 228  * @width: OCP data width
 229  * @user: initiators using this interface (see OCP_USER_* macros above)
 230  * @flags: OCP interface flags (see OCPIF_* macros above)
 231  *
 232  * It may also be useful to add a tag_cnt field for OCP2.x devices.
 233  *
 234  * Parameter names beginning with an underscore are managed internally by
 235  * the omap_hwmod code and should not be set during initialization.
 236  */
 237 struct omap_hwmod_ocp_if {
 238         struct omap_hwmod               *master;
 239         struct omap_hwmod               *slave;
 240         struct omap_hwmod_addr_space    *addr;
 241         const char                      *clk;
 242         struct clk                      *_clk;
 243         union {
 244                 struct omap_hwmod_omap2_firewall omap2;
 245         }                               fw;
 246         u8                              width;
 247         u8                              user;
 248         u8                              flags;
 249 };
 250
 251
 252 /* Macros for use in struct omap_hwmod_sysconfig */
 253
 254 /* Flags for use in omap_hwmod_sysconfig.idlemodes */
 255 #define MASTER_STANDBY_SHIFT    4
 256 #define SLAVE_IDLE_SHIFT        0
 257 #define SIDLE_FORCE             (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
 258 #define SIDLE_NO                (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
 259 #define SIDLE_SMART             (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
 260 #define SIDLE_SMART_WKUP        (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
 261 #define MSTANDBY_FORCE          (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
 262 #define MSTANDBY_NO             (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
 263 #define MSTANDBY_SMART          (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
 264 #define MSTANDBY_SMART_WKUP     (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
 265
 266 /* omap_hwmod_sysconfig.sysc_flags capability flags */
 267 #define SYSC_HAS_AUTOIDLE       (1 << 0)
 268 #define SYSC_HAS_SOFTRESET      (1 << 1)
 269 #define SYSC_HAS_ENAWAKEUP      (1 << 2)
 270 #define SYSC_HAS_EMUFREE        (1 << 3)
 271 #define SYSC_HAS_CLOCKACTIVITY  (1 << 4)
 272 #define SYSC_HAS_SIDLEMODE      (1 << 5)
 273 #define SYSC_HAS_MIDLEMODE      (1 << 6)
 274 #define SYSS_HAS_RESET_STATUS   (1 << 7)
 275 #define SYSC_NO_CACHE           (1 << 8)  /* XXX SW flag, belongs elsewhere */
 276 #define SYSC_HAS_RESET_STATUS   (1 << 9)
 277
 278 /* omap_hwmod_sysconfig.clockact flags */
 279 #define CLOCKACT_TEST_BOTH      0x0
 280 #define CLOCKACT_TEST_MAIN      0x1
 281 #define CLOCKACT_TEST_ICLK      0x2
 282 #define CLOCKACT_TEST_NONE      0x3
 283
 284 /**
 285  * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
 286  * @midle_shift: Offset of the midle bit
 287  * @clkact_shift: Offset of the clockactivity bit
 288  * @sidle_shift: Offset of the sidle bit
 289  * @enwkup_shift: Offset of the enawakeup bit
 290  * @srst_shift: Offset of the softreset bit
 291  * @autoidle_shift: Offset of the autoidle bit
 292  */
 293 struct omap_hwmod_sysc_fields {
 294         u8 midle_shift;
 295         u8 clkact_shift;
 296         u8 sidle_shift;
 297         u8 enwkup_shift;
 298         u8 srst_shift;
 299         u8 autoidle_shift;
 300 };
 301
 302 /**
 303  * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
 304  * @rev_offs: IP block revision register offset (from module base addr)
 305  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
 306  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
 307  * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
 308  * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
 309  * @clockact: the default value of the module CLOCKACTIVITY bits
 310  *
 311  * @clockact describes to the module which clocks are likely to be
 312  * disabled when the PRCM issues its idle request to the module.  Some
 313  * modules have separate clockdomains for the interface clock and main
 314  * functional clock, and can check whether they should acknowledge the
 315  * idle request based on the internal module functionality that has
 316  * been associated with the clocks marked in @clockact.  This field is
 317  * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
 318  *
 319  * @sysc_fields: structure containing the offset positions of various bits in
 320  * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
 321  * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
 322  * whether the device ip is compliant with the original PRCM protocol
 323  * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
 324  * If the device follows a different scheme for the sysconfig register ,
 325  * then this field has to be populated with the correct offset structure.
 326  */
 327 struct omap_hwmod_class_sysconfig {
 328         u16 rev_offs;
 329         u16 sysc_offs;
 330         u16 syss_offs;
 331         u16 sysc_flags;
 332         u8 idlemodes;
 333         u8 clockact;
 334         struct omap_hwmod_sysc_fields *sysc_fields;
 335 };
 336
 337 /**
 338  * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
 339  * @module_offs: PRCM submodule offset from the start of the PRM/CM
 340  * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
 341  * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
 342  * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
 343  * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
 344  * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
 345  *
 346  * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
 347  * WKEN, GRPSEL registers.  In an ideal world, no extra information
 348  * would be needed for IDLEST information, but alas, there are some
 349  * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
 350  * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
 351  */
 352 struct omap_hwmod_omap2_prcm {
 353         s16 module_offs;
 354         u8 prcm_reg_id;
 355         u8 module_bit;
 356         u8 idlest_reg_id;
 357         u8 idlest_idle_bit;
 358         u8 idlest_stdby_bit;
 359 };
 360
 361
 362 /**
 363  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
 364  * @clkctrl_reg: PRCM address of the clock control register
 365  * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
 366  * @submodule_wkdep_bit: bit shift of the WKDEP range
 367  */
 368 struct omap_hwmod_omap4_prcm {
 369         u16             clkctrl_offs;
 370         u16             rstctrl_offs;
 371         u16             context_offs;
 372         u8              submodule_wkdep_bit;
 373         u8              modulemode;
 374 };
 375
 376
 377 /*
 378  * omap_hwmod.flags definitions
 379  *
 380  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
 381  *     of idle, rather than relying on module smart-idle
 382  * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
 383  *     of standby, rather than relying on module smart-standby
 384  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
 385  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
 386  *     XXX Should be HWMOD_SETUP_NO_RESET
 387  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
 388  *     controller, etc. XXX probably belongs outside the main hwmod file
 389  *     XXX Should be HWMOD_SETUP_NO_IDLE
 390  * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
 391  *     when module is enabled, rather than the default, which is to
 392  *     enable autoidle
 393  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
 394  * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
 395  *     only for few initiator modules on OMAP2 & 3.
 396  * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
 397  *     This is needed for devices like DSS that require optional clocks enabled
 398  *     in order to complete the reset. Optional clocks will be disabled
 399  *     again after the reset.
 400  * HWMOD_16BIT_REG: Module has 16bit registers
 401  */
 402 #define HWMOD_SWSUP_SIDLE                       (1 << 0)
 403 #define HWMOD_SWSUP_MSTANDBY                    (1 << 1)
 404 #define HWMOD_INIT_NO_RESET                     (1 << 2)
 405 #define HWMOD_INIT_NO_IDLE                      (1 << 3)
 406 #define HWMOD_NO_OCP_AUTOIDLE                   (1 << 4)
 407 #define HWMOD_SET_DEFAULT_CLOCKACT              (1 << 5)
 408 #define HWMOD_NO_IDLEST                         (1 << 6)
 409 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET         (1 << 7)
 410 #define HWMOD_16BIT_REG                         (1 << 8)
 411
 412 /*
 413  * omap_hwmod._int_flags definitions
 414  * These are for internal use only and are managed by the omap_hwmod code.
 415  *
 416  * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
 417  * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
 418  * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
 419  */
 420 #define _HWMOD_NO_MPU_PORT                      (1 << 0)
 421 #define _HWMOD_WAKEUP_ENABLED                   (1 << 1)
 422 #define _HWMOD_SYSCONFIG_LOADED                 (1 << 2)
 423
 424 /*
 425  * omap_hwmod._state definitions
 426  *
 427  * INITIALIZED: reset (optionally), initialized, enabled, disabled
 428  *              (optionally)
 429  *
 430  *
 431  */
 432 #define _HWMOD_STATE_UNKNOWN                    0
 433 #define _HWMOD_STATE_REGISTERED                 1
 434 #define _HWMOD_STATE_CLKS_INITED                2
 435 #define _HWMOD_STATE_INITIALIZED                3
 436 #define _HWMOD_STATE_ENABLED                    4
 437 #define _HWMOD_STATE_IDLE                       5
 438 #define _HWMOD_STATE_DISABLED                   6
 439
 440 /**
 441  * struct omap_hwmod_class - the type of an IP block
 442  * @name: name of the hwmod_class
 443  * @sysc: device SYSCONFIG/SYSSTATUS register data
 444  * @rev: revision of the IP class
 445  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
 446  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
 447  *
 448  * Represent the class of a OMAP hardware "modules" (e.g. timer,
 449  * smartreflex, gpio, uart...)
 450  *
 451  * @pre_shutdown is a function that will be run immediately before
 452  * hwmod clocks are disabled, etc.  It is intended for use for hwmods
 453  * like the MPU watchdog, which cannot be disabled with the standard
 454  * omap_hwmod_shutdown().  The function should return 0 upon success,
 455  * or some negative error upon failure.  Returning an error will cause
 456  * omap_hwmod_shutdown() to abort the device shutdown and return an
 457  * error.
 458  *
 459  * If @reset is defined, then the function it points to will be
 460  * executed in place of the standard hwmod _reset() code in
 461  * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
 462  * unusual reset sequences - usually processor IP blocks like the IVA.
 463  */
 464 struct omap_hwmod_class {
 465         const char                              *name;
 466         struct omap_hwmod_class_sysconfig       *sysc;
 467         u32                                     rev;
 468         int                                     (*pre_shutdown)(struct omap_hwmod *oh);
 469         int                                     (*reset)(struct omap_hwmod *oh);
 470 };
 471
 472 /**
 473  * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
 474  * @name: name of the hwmod
 475  * @class: struct omap_hwmod_class * to the class of this hwmod
 476  * @od: struct omap_device currently associated with this hwmod (internal use)
 477  * @mpu_irqs: ptr to an array of MPU IRQs
 478  * @sdma_reqs: ptr to an array of System DMA request IDs
 479  * @prcm: PRCM data pertaining to this hwmod
 480  * @main_clk: main clock: OMAP clock name
 481  * @_clk: pointer to the main struct clk (filled in at runtime)
 482  * @opt_clks: other device clocks that drivers can request (0..*)
 483  * @vdd_name: voltage domain name
 484  * @voltdm: pointer to voltage domain (filled in at runtime)
 485  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
 486  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
 487  * @dev_attr: arbitrary device attributes that can be passed to the driver
 488  * @_sysc_cache: internal-use hwmod flags
 489  * @_mpu_rt_va: cached register target start address (internal use)
 490  * @_mpu_port_index: cached MPU register target slave ID (internal use)
 491  * @opt_clks_cnt: number of @opt_clks
 492  * @master_cnt: number of @master entries
 493  * @slaves_cnt: number of @slave entries
 494  * @response_lat: device OCP response latency (in interface clock cycles)
 495  * @_int_flags: internal-use hwmod flags
 496  * @_state: internal-use hwmod state
 497  * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
 498  * @flags: hwmod flags (documented below)
 499  * @_lock: spinlock serializing operations on this hwmod
 500  * @node: list node for hwmod list (internal use)
 501  *
 502  * @main_clk refers to this module's "main clock," which for our
 503  * purposes is defined as "the functional clock needed for register
 504  * accesses to complete."  Modules may not have a main clock if the
 505  * interface clock also serves as a main clock.
 506  *
 507  * Parameter names beginning with an underscore are managed internally by
 508  * the omap_hwmod code and should not be set during initialization.
 509  */
 510 struct omap_hwmod {
 511         const char                      *name;
 512         struct omap_hwmod_class         *class;
 513         struct omap_device              *od;
 514         struct omap_hwmod_mux_info      *mux;
 515         struct omap_hwmod_irq_info      *mpu_irqs;
 516         struct omap_hwmod_dma_info      *sdma_reqs;
 517         struct omap_hwmod_rst_info      *rst_lines;
 518         union {
 519                 struct omap_hwmod_omap2_prcm omap2;
 520                 struct omap_hwmod_omap4_prcm omap4;
 521         }                               prcm;
 522         const char                      *main_clk;
 523         struct clk                      *_clk;
 524         struct omap_hwmod_opt_clk       *opt_clks;
 525         char                            *clkdm_name;
 526         struct clockdomain              *clkdm;
 527         char                            *vdd_name;
 528         struct omap_hwmod_ocp_if        **masters; /* connect to *_IA */
 529         struct omap_hwmod_ocp_if        **slaves;  /* connect to *_TA */
 530         void                            *dev_attr;
 531         u32                             _sysc_cache;
 532         void __iomem                    *_mpu_rt_va;
 533         spinlock_t                      _lock;
 534         struct list_head                node;
 535         u16                             flags;
 536         u8                              _mpu_port_index;
 537         u8                              response_lat;
 538         u8                              rst_lines_cnt;
 539         u8                              opt_clks_cnt;
 540         u8                              masters_cnt;
 541         u8                              slaves_cnt;
 542         u8                              hwmods_cnt;
 543         u8                              _int_flags;
 544         u8                              _state;
 545         u8                              _postsetup_state;
 546 };
 547
 548 int omap_hwmod_register(struct omap_hwmod **ohs);
 549 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 550 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 551                         void *data);
 552
 553 int __init omap_hwmod_setup_one(const char *name);
 554
 555 int omap_hwmod_enable(struct omap_hwmod *oh);
 556 int _omap_hwmod_enable(struct omap_hwmod *oh);
 557 int omap_hwmod_idle(struct omap_hwmod *oh);
 558 int _omap_hwmod_idle(struct omap_hwmod *oh);
 559 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 560
 561 int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
 562 int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
 563 int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
 564
 565 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 566 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 567
 568 int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
 569 int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
 570
 571 int omap_hwmod_reset(struct omap_hwmod *oh);
 572 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 573
 574 void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
 575 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
 576 int omap_hwmod_softreset(struct omap_hwmod *oh);
 577
 578 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 579 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
 580
 581 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 582 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 583
 584 int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
 585                                  struct omap_hwmod *init_oh);
 586 int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
 587                                  struct omap_hwmod *init_oh);
 588
 589 int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
 590 int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
 591 int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
 592 int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
 593
 594 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
 595 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
 596
 597 int omap_hwmod_for_each_by_class(const char *classname,
 598                                  int (*fn)(struct omap_hwmod *oh,
 599                                            void *user),
 600                                  void *user);
 601
 602 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
 603 u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 604
 605 int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 606
 607 /*
 608  * Chip variant-specific hwmod init routines - XXX should be converted
 609  * to use initcalls once the initial boot ordering is straightened out
 610  */
 611 extern int omap2420_hwmod_init(void);
 612 extern int omap2430_hwmod_init(void);
 613 extern int omap3xxx_hwmod_init(void);
 614 extern int omap44xx_hwmod_init(void);
 615
 616 #endif