arch/mips/pnx8550/common/setup.c

   1 /*
   2  *
   3  * 2.6 port, Embedded Alley Solutions, Inc
   4  *
   5  *  Based on Per Hallsmark, per.hallsmark@mvista.com
   6  *
   7  *  This program is free software; you can distribute it and/or modify it
   8  *  under the terms of the GNU General Public License (Version 2) as
   9  *  published by the Free Software Foundation.
  10  *
  11  *  This program is distributed in the hope it will be useful, but WITHOUT
  12  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  14  *  for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License along
  17  *  with this program; if not, write to the Free Software Foundation, Inc.,
  18  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  19  */
  20 #include <linux/init.h>
  21 #include <linux/sched.h>
  22 #include <linux/ioport.h>
  23 #include <linux/irq.h>
  24 #include <linux/mm.h>
  25 #include <linux/delay.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/serial_pnx8xxx.h>
  28 #include <linux/pm.h>
  29
  30 #include <asm/cpu.h>
  31 #include <asm/bootinfo.h>
  32 #include <asm/irq.h>
  33 #include <asm/mipsregs.h>
  34 #include <asm/reboot.h>
  35 #include <asm/pgtable.h>
  36 #include <asm/time.h>
  37
  38 #include <glb.h>
  39 #include <int.h>
  40 #include <pci.h>
  41 #include <uart.h>
  42 #include <nand.h>
  43
  44 extern void __init board_setup(void);
  45 extern void pnx8550_machine_restart(char *);
  46 extern void pnx8550_machine_halt(void);
  47 extern struct resource ioport_resource;
  48 extern struct resource iomem_resource;
  49 extern char *prom_getcmdline(void);
  50
  51 struct resource standard_io_resources[] = {
  52         {
  53                 .start  = 0x00,
  54                 .end    = 0x1f,
  55                 .name   = "dma1",
  56                 .flags  = IORESOURCE_BUSY
  57         }, {
  58                 .start  = 0x40,
  59                 .end    = 0x5f,
  60                 .name   = "timer",
  61                 .flags  = IORESOURCE_BUSY
  62         }, {
  63                 .start  = 0x80,
  64                 .end    = 0x8f,
  65                 .name   = "dma page reg",
  66                 .flags  = IORESOURCE_BUSY
  67         }, {
  68                 .start  = 0xc0,
  69                 .end    = 0xdf,
  70                 .name   = "dma2",
  71                 .flags  = IORESOURCE_BUSY
  72         },
  73 };
  74
  75 #define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
  76
  77 extern struct resource pci_io_resource;
  78 extern struct resource pci_mem_resource;
  79
  80 /* Return the total size of DRAM-memory, (RANK0 + RANK1) */
  81 unsigned long get_system_mem_size(void)
  82 {
  83         /* Read IP2031_RANK0_ADDR_LO */
  84         unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
  85         /* Read IP2031_RANK1_ADDR_HI */
  86         unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
  87
  88         return dram_r1_hi - dram_r0_lo + 1;
  89 }
  90
  91 int pnx8550_console_port = -1;
  92
  93 void __init plat_mem_setup(void)
  94 {
  95         int i;
  96         char* argptr;
  97
  98         board_setup();  /* board specific setup */
  99
 100         _machine_restart = pnx8550_machine_restart;
 101         _machine_halt = pnx8550_machine_halt;
 102         pm_power_off = pnx8550_machine_halt;
 103
 104         /* Clear the Global 2 Register, PCI Inta Output Enable Registers
 105            Bit 1:Enable DAC Powerdown
 106           -> 0:DACs are enabled and are working normally
 107              1:DACs are powerdown
 108            Bit 0:Enable of PCI inta output
 109           -> 0 = Disable PCI inta output
 110              1 = Enable PCI inta output
 111         */
 112         PNX8550_GLB2_ENAB_INTA_O = 0;
 113
 114         /* IO/MEM resources. */
 115         set_io_port_base(PNX8550_PORT_BASE);
 116         ioport_resource.start = 0;
 117         ioport_resource.end = ~0;
 118         iomem_resource.start = 0;
 119         iomem_resource.end = ~0;
 120
 121         /* Request I/O space for devices on this board */
 122         for (i = 0; i < STANDARD_IO_RESOURCES; i++)
 123                 request_resource(&ioport_resource, standard_io_resources + i);
 124
 125         /* Place the Mode Control bit for GPIO pin 16 in primary function */
 126         /* Pin 16 is used by UART1, UA1_TX                                */
 127         outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
 128                         (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
 129                         PNX8550_GPIO_MC1);
 130
 131         argptr = prom_getcmdline();
 132         if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
 133                 argptr += strlen("console=ttyS");
 134                 pnx8550_console_port = *argptr == '0' ? 0 : 1;
 135
 136                 /* We must initialize the UART (console) before early printk */
 137                 /* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
 138                 ip3106_lcr(UART_BASE, pnx8550_console_port) =
 139                         PNX8XXX_UART_LCR_8BIT;
 140                 ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 141         }
 142 }