1 /******************************************************************************
3 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/skbuff.h>
29 #include <linux/slab.h>
30 #include <net/mac80211.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/delay.h>
36 #include <linux/workqueue.h>
42 #define RS_NAME "iwl-agn-rs"
44 #define NUM_TRY_BEFORE_ANT_TOGGLE 1
45 #define IWL_NUMBER_TRY 1
46 #define IWL_HT_NUMBER_TRY 3
48 #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
49 #define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
50 #define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
52 /* max allowed rate miss before sync LQ cmd */
53 #define IWL_MISSED_RATE_MAX 15
54 /* max time to accum history 2 seconds */
55 #define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ)
57 static u8 rs_ht_to_legacy
[] = {
58 IWL_RATE_6M_INDEX
, IWL_RATE_6M_INDEX
,
59 IWL_RATE_6M_INDEX
, IWL_RATE_6M_INDEX
,
61 IWL_RATE_6M_INDEX
, IWL_RATE_9M_INDEX
,
62 IWL_RATE_12M_INDEX
, IWL_RATE_18M_INDEX
,
63 IWL_RATE_24M_INDEX
, IWL_RATE_36M_INDEX
,
64 IWL_RATE_48M_INDEX
, IWL_RATE_54M_INDEX
67 static const u8 ant_toggle_lookup
[] = {
68 /*ANT_NONE -> */ ANT_NONE
,
71 /*ANT_AB -> */ ANT_BC
,
73 /*ANT_AC -> */ ANT_AB
,
74 /*ANT_BC -> */ ANT_AC
,
75 /*ANT_ABC -> */ ANT_ABC
,
78 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
79 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
80 IWL_RATE_SISO_##s##M_PLCP, \
81 IWL_RATE_MIMO2_##s##M_PLCP,\
82 IWL_RATE_MIMO3_##s##M_PLCP,\
83 IWL_RATE_##r##M_IEEE, \
84 IWL_RATE_##ip##M_INDEX, \
85 IWL_RATE_##in##M_INDEX, \
86 IWL_RATE_##rp##M_INDEX, \
87 IWL_RATE_##rn##M_INDEX, \
88 IWL_RATE_##pp##M_INDEX, \
89 IWL_RATE_##np##M_INDEX }
93 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
95 * If there isn't a valid next or previous rate then INV is used which
96 * maps to IWL_RATE_INVALID
99 const struct iwl_rate_info iwl_rates
[IWL_RATE_COUNT
] = {
100 IWL_DECLARE_RATE_INFO(1, INV
, INV
, 2, INV
, 2, INV
, 2), /* 1mbps */
101 IWL_DECLARE_RATE_INFO(2, INV
, 1, 5, 1, 5, 1, 5), /* 2mbps */
102 IWL_DECLARE_RATE_INFO(5, INV
, 2, 6, 2, 11, 2, 11), /*5.5mbps */
103 IWL_DECLARE_RATE_INFO(11, INV
, 9, 12, 9, 12, 5, 18), /* 11mbps */
104 IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
105 IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
106 IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
107 IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
108 IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
109 IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
110 IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
111 IWL_DECLARE_RATE_INFO(54, 54, 48, INV
, 48, INV
, 48, INV
),/* 54mbps */
112 IWL_DECLARE_RATE_INFO(60, 60, 48, INV
, 48, INV
, 48, INV
),/* 60mbps */
113 /* FIXME:RS: ^^ should be INV (legacy) */
116 static inline u8
rs_extract_rate(u32 rate_n_flags
)
118 return (u8
)(rate_n_flags
& RATE_MCS_RATE_MSK
);
121 static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags
)
126 if (rate_n_flags
& RATE_MCS_HT_MSK
) {
127 idx
= rs_extract_rate(rate_n_flags
);
129 if (idx
>= IWL_RATE_MIMO3_6M_PLCP
)
130 idx
= idx
- IWL_RATE_MIMO3_6M_PLCP
;
131 else if (idx
>= IWL_RATE_MIMO2_6M_PLCP
)
132 idx
= idx
- IWL_RATE_MIMO2_6M_PLCP
;
134 idx
+= IWL_FIRST_OFDM_RATE
;
135 /* skip 9M not supported in ht*/
136 if (idx
>= IWL_RATE_9M_INDEX
)
138 if ((idx
>= IWL_FIRST_OFDM_RATE
) && (idx
<= IWL_LAST_OFDM_RATE
))
141 /* legacy rate format, search for match in table */
143 for (idx
= 0; idx
< ARRAY_SIZE(iwl_rates
); idx
++)
144 if (iwl_rates
[idx
].plcp
==
145 rs_extract_rate(rate_n_flags
))
152 static void rs_rate_scale_perform(struct iwl_priv
*priv
,
154 struct ieee80211_sta
*sta
,
155 struct iwl_lq_sta
*lq_sta
);
156 static void rs_fill_link_cmd(struct iwl_priv
*priv
,
157 struct iwl_lq_sta
*lq_sta
, u32 rate_n_flags
);
158 static void rs_stay_in_table(struct iwl_lq_sta
*lq_sta
, bool force_search
);
161 #ifdef CONFIG_MAC80211_DEBUGFS
162 static void rs_dbgfs_set_mcs(struct iwl_lq_sta
*lq_sta
,
163 u32
*rate_n_flags
, int index
);
165 static void rs_dbgfs_set_mcs(struct iwl_lq_sta
*lq_sta
,
166 u32
*rate_n_flags
, int index
)
171 * The following tables contain the expected throughput metrics for all rates
173 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
175 * where invalid entries are zeros.
177 * CCK rates are only valid in legacy table and will only be used in G
181 static s32 expected_tpt_legacy
[IWL_RATE_COUNT
] = {
182 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
185 static s32 expected_tpt_siso20MHz
[4][IWL_RATE_COUNT
] = {
186 {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */
187 {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */
188 {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */
189 {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
192 static s32 expected_tpt_siso40MHz
[4][IWL_RATE_COUNT
] = {
193 {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
194 {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
195 {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
196 {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
199 static s32 expected_tpt_mimo2_20MHz
[4][IWL_RATE_COUNT
] = {
200 {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
201 {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
202 {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
203 {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
206 static s32 expected_tpt_mimo2_40MHz
[4][IWL_RATE_COUNT
] = {
207 {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
208 {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
209 {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
210 {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
213 static s32 expected_tpt_mimo3_20MHz
[4][IWL_RATE_COUNT
] = {
214 {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
215 {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
216 {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
217 {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
220 static s32 expected_tpt_mimo3_40MHz
[4][IWL_RATE_COUNT
] = {
221 {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */
222 {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */
223 {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */
224 {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
228 static const struct iwl_rate_mcs_info iwl_rate_mcs
[IWL_RATE_COUNT
] = {
237 { "24", "16QAM 1/2"},
238 { "36", "16QAM 3/4"},
239 { "48", "64QAM 2/3"},
240 { "54", "64QAM 3/4"},
241 { "60", "64QAM 5/6"},
244 #define MCS_INDEX_PER_STREAM (8)
246 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data
*window
)
249 window
->success_counter
= 0;
250 window
->success_ratio
= IWL_INVALID_VALUE
;
252 window
->average_tpt
= IWL_INVALID_VALUE
;
256 static inline u8
rs_is_valid_ant(u8 valid_antenna
, u8 ant_type
)
258 return (ant_type
& valid_antenna
) == ant_type
;
262 * removes the old data from the statistics. All data that is older than
263 * TID_MAX_TIME_DIFF, will be deleted.
265 static void rs_tl_rm_old_stats(struct iwl_traffic_load
*tl
, u32 curr_time
)
267 /* The oldest age we want to keep */
268 u32 oldest_time
= curr_time
- TID_MAX_TIME_DIFF
;
270 while (tl
->queue_count
&&
271 (tl
->time_stamp
< oldest_time
)) {
272 tl
->total
-= tl
->packet_count
[tl
->head
];
273 tl
->packet_count
[tl
->head
] = 0;
274 tl
->time_stamp
+= TID_QUEUE_CELL_SPACING
;
277 if (tl
->head
>= TID_QUEUE_MAX_SIZE
)
283 * increment traffic load value for tid and also remove
284 * any old values if passed the certain time period
286 static u8
rs_tl_add_packet(struct iwl_lq_sta
*lq_data
,
287 struct ieee80211_hdr
*hdr
)
289 u32 curr_time
= jiffies_to_msecs(jiffies
);
292 struct iwl_traffic_load
*tl
= NULL
;
295 if (ieee80211_is_data_qos(hdr
->frame_control
)) {
296 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
299 return IWL_MAX_TID_COUNT
;
301 if (unlikely(tid
>= TID_MAX_LOAD_COUNT
))
302 return IWL_MAX_TID_COUNT
;
304 tl
= &lq_data
->load
[tid
];
306 curr_time
-= curr_time
% TID_ROUND_VALUE
;
308 /* Happens only for the first packet. Initialize the data */
309 if (!(tl
->queue_count
)) {
311 tl
->time_stamp
= curr_time
;
314 tl
->packet_count
[0] = 1;
315 return IWL_MAX_TID_COUNT
;
318 time_diff
= TIME_WRAP_AROUND(tl
->time_stamp
, curr_time
);
319 index
= time_diff
/ TID_QUEUE_CELL_SPACING
;
321 /* The history is too long: remove data that is older than */
322 /* TID_MAX_TIME_DIFF */
323 if (index
>= TID_QUEUE_MAX_SIZE
)
324 rs_tl_rm_old_stats(tl
, curr_time
);
326 index
= (tl
->head
+ index
) % TID_QUEUE_MAX_SIZE
;
327 tl
->packet_count
[index
] = tl
->packet_count
[index
] + 1;
328 tl
->total
= tl
->total
+ 1;
330 if ((index
+ 1) > tl
->queue_count
)
331 tl
->queue_count
= index
+ 1;
336 #ifdef CONFIG_MAC80211_DEBUGFS
338 * Program the device to use fixed rate for frame transmit
339 * This is for debugging/testing only
340 * once the device start use fixed rate, we need to reload the module
341 * to being back the normal operation.
343 static void rs_program_fix_rate(struct iwl_priv
*priv
,
344 struct iwl_lq_sta
*lq_sta
)
346 struct iwl_station_priv
*sta_priv
=
347 container_of(lq_sta
, struct iwl_station_priv
, lq_sta
);
348 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
350 lq_sta
->active_legacy_rate
= 0x0FFF; /* 1 - 54 MBits, includes CCK */
351 lq_sta
->active_siso_rate
= 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
352 lq_sta
->active_mimo2_rate
= 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
353 lq_sta
->active_mimo3_rate
= 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
355 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
356 /* testmode has higher priority to overwirte the fixed rate */
357 if (priv
->tm_fixed_rate
)
358 lq_sta
->dbg_fixed_rate
= priv
->tm_fixed_rate
;
361 IWL_DEBUG_RATE(priv
, "sta_id %d rate 0x%X\n",
362 lq_sta
->lq
.sta_id
, lq_sta
->dbg_fixed_rate
);
364 if (lq_sta
->dbg_fixed_rate
) {
365 rs_fill_link_cmd(NULL
, lq_sta
, lq_sta
->dbg_fixed_rate
);
366 iwl_send_lq_cmd(lq_sta
->drv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
,
373 get the traffic load value for tid
375 static u32
rs_tl_get_load(struct iwl_lq_sta
*lq_data
, u8 tid
)
377 u32 curr_time
= jiffies_to_msecs(jiffies
);
380 struct iwl_traffic_load
*tl
= NULL
;
382 if (tid
>= TID_MAX_LOAD_COUNT
)
385 tl
= &(lq_data
->load
[tid
]);
387 curr_time
-= curr_time
% TID_ROUND_VALUE
;
389 if (!(tl
->queue_count
))
392 time_diff
= TIME_WRAP_AROUND(tl
->time_stamp
, curr_time
);
393 index
= time_diff
/ TID_QUEUE_CELL_SPACING
;
395 /* The history is too long: remove data that is older than */
396 /* TID_MAX_TIME_DIFF */
397 if (index
>= TID_QUEUE_MAX_SIZE
)
398 rs_tl_rm_old_stats(tl
, curr_time
);
403 static int rs_tl_turn_on_agg_for_tid(struct iwl_priv
*priv
,
404 struct iwl_lq_sta
*lq_data
, u8 tid
,
405 struct ieee80211_sta
*sta
)
411 * Don't create TX aggregation sessions when in high
412 * BT traffic, as they would just be disrupted by BT.
414 if (priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
) {
415 IWL_ERR(priv
, "BT traffic (%d), no aggregation allowed\n",
416 priv
->bt_traffic_load
);
420 load
= rs_tl_get_load(lq_data
, tid
);
422 if ((iwlagn_mod_params
.auto_agg
) || (load
> IWL_AGG_LOAD_THRESHOLD
)) {
423 IWL_DEBUG_HT(priv
, "Starting Tx agg: STA: %pM tid: %d\n",
425 ret
= ieee80211_start_tx_ba_session(sta
, tid
, 5000);
426 if (ret
== -EAGAIN
) {
428 * driver and mac80211 is out of sync
429 * this might be cause by reloading firmware
430 * stop the tx ba session here
432 IWL_ERR(priv
, "Fail start Tx agg on tid: %d\n",
434 ieee80211_stop_tx_ba_session(sta
, tid
);
437 IWL_DEBUG_HT(priv
, "Aggregation not enabled for tid %d "
438 "because load = %u\n", tid
, load
);
443 static void rs_tl_turn_on_agg(struct iwl_priv
*priv
, u8 tid
,
444 struct iwl_lq_sta
*lq_data
,
445 struct ieee80211_sta
*sta
)
447 if (tid
< TID_MAX_LOAD_COUNT
)
448 rs_tl_turn_on_agg_for_tid(priv
, lq_data
, tid
, sta
);
450 IWL_ERR(priv
, "tid exceeds max load count: %d/%d\n",
451 tid
, TID_MAX_LOAD_COUNT
);
454 static inline int get_num_of_ant_from_rate(u32 rate_n_flags
)
456 return !!(rate_n_flags
& RATE_MCS_ANT_A_MSK
) +
457 !!(rate_n_flags
& RATE_MCS_ANT_B_MSK
) +
458 !!(rate_n_flags
& RATE_MCS_ANT_C_MSK
);
462 * Static function to get the expected throughput from an iwl_scale_tbl_info
463 * that wraps a NULL pointer check
465 static s32
get_expected_tpt(struct iwl_scale_tbl_info
*tbl
, int rs_index
)
467 if (tbl
->expected_tpt
)
468 return tbl
->expected_tpt
[rs_index
];
473 * rs_collect_tx_data - Update the success/failure sliding window
475 * We keep a sliding window of the last 62 packets transmitted
476 * at this rate. window->data contains the bitmask of successful
479 static int rs_collect_tx_data(struct iwl_scale_tbl_info
*tbl
,
480 int scale_index
, int attempts
, int successes
)
482 struct iwl_rate_scale_data
*window
= NULL
;
483 static const u64 mask
= (((u64
)1) << (IWL_RATE_MAX_WINDOW
- 1));
486 if (scale_index
< 0 || scale_index
>= IWL_RATE_COUNT
)
489 /* Select window for current tx bit rate */
490 window
= &(tbl
->win
[scale_index
]);
492 /* Get expected throughput */
493 tpt
= get_expected_tpt(tbl
, scale_index
);
496 * Keep track of only the latest 62 tx frame attempts in this rate's
497 * history window; anything older isn't really relevant any more.
498 * If we have filled up the sliding window, drop the oldest attempt;
499 * if the oldest attempt (highest bit in bitmap) shows "success",
500 * subtract "1" from the success counter (this is the main reason
501 * we keep these bitmaps!).
503 while (attempts
> 0) {
504 if (window
->counter
>= IWL_RATE_MAX_WINDOW
) {
506 /* remove earliest */
507 window
->counter
= IWL_RATE_MAX_WINDOW
- 1;
509 if (window
->data
& mask
) {
510 window
->data
&= ~mask
;
511 window
->success_counter
--;
515 /* Increment frames-attempted counter */
518 /* Shift bitmap by one frame to throw away oldest history */
521 /* Mark the most recent #successes attempts as successful */
523 window
->success_counter
++;
531 /* Calculate current success ratio, avoid divide-by-0! */
532 if (window
->counter
> 0)
533 window
->success_ratio
= 128 * (100 * window
->success_counter
)
536 window
->success_ratio
= IWL_INVALID_VALUE
;
538 fail_count
= window
->counter
- window
->success_counter
;
540 /* Calculate average throughput, if we have enough history. */
541 if ((fail_count
>= IWL_RATE_MIN_FAILURE_TH
) ||
542 (window
->success_counter
>= IWL_RATE_MIN_SUCCESS_TH
))
543 window
->average_tpt
= (window
->success_ratio
* tpt
+ 64) / 128;
545 window
->average_tpt
= IWL_INVALID_VALUE
;
547 /* Tag this window as having been updated */
548 window
->stamp
= jiffies
;
554 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
556 /* FIXME:RS:remove this function and put the flags statically in the table */
557 static u32
rate_n_flags_from_tbl(struct iwl_priv
*priv
,
558 struct iwl_scale_tbl_info
*tbl
,
559 int index
, u8 use_green
)
561 u32 rate_n_flags
= 0;
563 if (is_legacy(tbl
->lq_type
)) {
564 rate_n_flags
= iwl_rates
[index
].plcp
;
565 if (index
>= IWL_FIRST_CCK_RATE
&& index
<= IWL_LAST_CCK_RATE
)
566 rate_n_flags
|= RATE_MCS_CCK_MSK
;
568 } else if (is_Ht(tbl
->lq_type
)) {
569 if (index
> IWL_LAST_OFDM_RATE
) {
570 IWL_ERR(priv
, "Invalid HT rate index %d\n", index
);
571 index
= IWL_LAST_OFDM_RATE
;
573 rate_n_flags
= RATE_MCS_HT_MSK
;
575 if (is_siso(tbl
->lq_type
))
576 rate_n_flags
|= iwl_rates
[index
].plcp_siso
;
577 else if (is_mimo2(tbl
->lq_type
))
578 rate_n_flags
|= iwl_rates
[index
].plcp_mimo2
;
580 rate_n_flags
|= iwl_rates
[index
].plcp_mimo3
;
582 IWL_ERR(priv
, "Invalid tbl->lq_type %d\n", tbl
->lq_type
);
585 rate_n_flags
|= ((tbl
->ant_type
<< RATE_MCS_ANT_POS
) &
586 RATE_MCS_ANT_ABC_MSK
);
588 if (is_Ht(tbl
->lq_type
)) {
591 rate_n_flags
|= RATE_MCS_DUP_MSK
;
593 rate_n_flags
|= RATE_MCS_HT40_MSK
;
596 rate_n_flags
|= RATE_MCS_SGI_MSK
;
599 rate_n_flags
|= RATE_MCS_GF_MSK
;
600 if (is_siso(tbl
->lq_type
) && tbl
->is_SGI
) {
601 rate_n_flags
&= ~RATE_MCS_SGI_MSK
;
602 IWL_ERR(priv
, "GF was set with SGI:SISO\n");
610 * Interpret uCode API's rate_n_flags format,
611 * fill "search" or "active" tx mode table.
613 static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags
,
614 enum ieee80211_band band
,
615 struct iwl_scale_tbl_info
*tbl
,
618 u32 ant_msk
= (rate_n_flags
& RATE_MCS_ANT_ABC_MSK
);
619 u8 num_of_ant
= get_num_of_ant_from_rate(rate_n_flags
);
622 memset(tbl
, 0, sizeof(struct iwl_scale_tbl_info
));
623 *rate_idx
= iwl_hwrate_to_plcp_idx(rate_n_flags
);
625 if (*rate_idx
== IWL_RATE_INVALID
) {
629 tbl
->is_SGI
= 0; /* default legacy setup */
632 tbl
->ant_type
= (ant_msk
>> RATE_MCS_ANT_POS
);
633 tbl
->lq_type
= LQ_NONE
;
634 tbl
->max_search
= IWL_MAX_SEARCH
;
636 /* legacy rate format */
637 if (!(rate_n_flags
& RATE_MCS_HT_MSK
)) {
638 if (num_of_ant
== 1) {
639 if (band
== IEEE80211_BAND_5GHZ
)
646 if (rate_n_flags
& RATE_MCS_SGI_MSK
)
649 if ((rate_n_flags
& RATE_MCS_HT40_MSK
) ||
650 (rate_n_flags
& RATE_MCS_DUP_MSK
))
653 if (rate_n_flags
& RATE_MCS_DUP_MSK
)
656 mcs
= rs_extract_rate(rate_n_flags
);
659 if (mcs
<= IWL_RATE_SISO_60M_PLCP
) {
661 tbl
->lq_type
= LQ_SISO
; /*else NONE*/
663 } else if (mcs
<= IWL_RATE_MIMO2_60M_PLCP
) {
665 tbl
->lq_type
= LQ_MIMO2
;
668 if (num_of_ant
== 3) {
669 tbl
->max_search
= IWL_MAX_11N_MIMO3_SEARCH
;
670 tbl
->lq_type
= LQ_MIMO3
;
677 /* switch to another antenna/antennas and return 1 */
678 /* if no other valid antenna found, return 0 */
679 static int rs_toggle_antenna(u32 valid_ant
, u32
*rate_n_flags
,
680 struct iwl_scale_tbl_info
*tbl
)
684 if (!tbl
->ant_type
|| tbl
->ant_type
> ANT_ABC
)
687 if (!rs_is_valid_ant(valid_ant
, tbl
->ant_type
))
690 new_ant_type
= ant_toggle_lookup
[tbl
->ant_type
];
692 while ((new_ant_type
!= tbl
->ant_type
) &&
693 !rs_is_valid_ant(valid_ant
, new_ant_type
))
694 new_ant_type
= ant_toggle_lookup
[new_ant_type
];
696 if (new_ant_type
== tbl
->ant_type
)
699 tbl
->ant_type
= new_ant_type
;
700 *rate_n_flags
&= ~RATE_MCS_ANT_ABC_MSK
;
701 *rate_n_flags
|= new_ant_type
<< RATE_MCS_ANT_POS
;
706 * Green-field mode is valid if the station supports it and
707 * there are no non-GF stations present in the BSS.
709 static bool rs_use_green(struct ieee80211_sta
*sta
)
711 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
712 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
714 return (sta
->ht_cap
.cap
& IEEE80211_HT_CAP_GRN_FLD
) &&
715 !(ctx
->ht
.non_gf_sta_present
);
719 * rs_get_supported_rates - get the available rates
721 * if management frame or broadcast frame only return
722 * basic available rates.
725 static u16
rs_get_supported_rates(struct iwl_lq_sta
*lq_sta
,
726 struct ieee80211_hdr
*hdr
,
727 enum iwl_table_type rate_type
)
729 if (is_legacy(rate_type
)) {
730 return lq_sta
->active_legacy_rate
;
732 if (is_siso(rate_type
))
733 return lq_sta
->active_siso_rate
;
734 else if (is_mimo2(rate_type
))
735 return lq_sta
->active_mimo2_rate
;
737 return lq_sta
->active_mimo3_rate
;
741 static u16
rs_get_adjacent_rate(struct iwl_priv
*priv
, u8 index
, u16 rate_mask
,
744 u8 high
= IWL_RATE_INVALID
;
745 u8 low
= IWL_RATE_INVALID
;
747 /* 802.11A or ht walks to the next literal adjacent rate in
749 if (is_a_band(rate_type
) || !is_legacy(rate_type
)) {
753 /* Find the previous rate that is in the rate mask */
755 for (mask
= (1 << i
); i
>= 0; i
--, mask
>>= 1) {
756 if (rate_mask
& mask
) {
762 /* Find the next rate that is in the rate mask */
764 for (mask
= (1 << i
); i
< IWL_RATE_COUNT
; i
++, mask
<<= 1) {
765 if (rate_mask
& mask
) {
771 return (high
<< 8) | low
;
775 while (low
!= IWL_RATE_INVALID
) {
776 low
= iwl_rates
[low
].prev_rs
;
777 if (low
== IWL_RATE_INVALID
)
779 if (rate_mask
& (1 << low
))
781 IWL_DEBUG_RATE(priv
, "Skipping masked lower rate: %d\n", low
);
785 while (high
!= IWL_RATE_INVALID
) {
786 high
= iwl_rates
[high
].next_rs
;
787 if (high
== IWL_RATE_INVALID
)
789 if (rate_mask
& (1 << high
))
791 IWL_DEBUG_RATE(priv
, "Skipping masked higher rate: %d\n", high
);
794 return (high
<< 8) | low
;
797 static u32
rs_get_lower_rate(struct iwl_lq_sta
*lq_sta
,
798 struct iwl_scale_tbl_info
*tbl
,
799 u8 scale_index
, u8 ht_possible
)
804 u8 switch_to_legacy
= 0;
805 u8 is_green
= lq_sta
->is_green
;
806 struct iwl_priv
*priv
= lq_sta
->drv
;
808 /* check if we need to switch from HT to legacy rates.
809 * assumption is that mandatory rates (1Mbps or 6Mbps)
810 * are always supported (spec demand) */
811 if (!is_legacy(tbl
->lq_type
) && (!ht_possible
|| !scale_index
)) {
812 switch_to_legacy
= 1;
813 scale_index
= rs_ht_to_legacy
[scale_index
];
814 if (lq_sta
->band
== IEEE80211_BAND_5GHZ
)
819 if (num_of_ant(tbl
->ant_type
) > 1)
821 first_antenna(hw_params(priv
).valid_tx_ant
);
825 tbl
->max_search
= IWL_MAX_SEARCH
;
828 rate_mask
= rs_get_supported_rates(lq_sta
, NULL
, tbl
->lq_type
);
830 /* Mask with station rate restriction */
831 if (is_legacy(tbl
->lq_type
)) {
832 /* supp_rates has no CCK bits in A mode */
833 if (lq_sta
->band
== IEEE80211_BAND_5GHZ
)
834 rate_mask
= (u16
)(rate_mask
&
835 (lq_sta
->supp_rates
<< IWL_FIRST_OFDM_RATE
));
837 rate_mask
= (u16
)(rate_mask
& lq_sta
->supp_rates
);
840 /* If we switched from HT to legacy, check current rate */
841 if (switch_to_legacy
&& (rate_mask
& (1 << scale_index
))) {
846 high_low
= rs_get_adjacent_rate(lq_sta
->drv
, scale_index
, rate_mask
,
848 low
= high_low
& 0xff;
850 if (low
== IWL_RATE_INVALID
)
854 return rate_n_flags_from_tbl(lq_sta
->drv
, tbl
, low
, is_green
);
858 * Simple function to compare two rate scale table types
860 static bool table_type_matches(struct iwl_scale_tbl_info
*a
,
861 struct iwl_scale_tbl_info
*b
)
863 return (a
->lq_type
== b
->lq_type
) && (a
->ant_type
== b
->ant_type
) &&
864 (a
->is_SGI
== b
->is_SGI
);
867 static void rs_bt_update_lq(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
,
868 struct iwl_lq_sta
*lq_sta
)
870 struct iwl_scale_tbl_info
*tbl
;
871 bool full_concurrent
= priv
->bt_full_concurrent
;
874 if (priv
->bt_ant_couple_ok
) {
876 * Is there a need to switch between
877 * full concurrency and 3-wire?
879 spin_lock_irqsave(&priv
->shrd
->lock
, flags
);
880 if (priv
->bt_ci_compliance
&& priv
->bt_ant_couple_ok
)
881 full_concurrent
= true;
883 full_concurrent
= false;
884 spin_unlock_irqrestore(&priv
->shrd
->lock
, flags
);
886 if ((priv
->bt_traffic_load
!= priv
->last_bt_traffic_load
) ||
887 (priv
->bt_full_concurrent
!= full_concurrent
)) {
888 priv
->bt_full_concurrent
= full_concurrent
;
890 /* Update uCode's rate table. */
891 tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
892 rs_fill_link_cmd(priv
, lq_sta
, tbl
->current_rate
);
893 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
895 queue_work(priv
->shrd
->workqueue
, &priv
->bt_full_concurrency
);
900 * mac80211 sends us Tx status
902 static void rs_tx_status(void *priv_r
, struct ieee80211_supported_band
*sband
,
903 struct ieee80211_sta
*sta
, void *priv_sta
,
908 int rs_index
, mac_index
, i
;
909 struct iwl_lq_sta
*lq_sta
= priv_sta
;
910 struct iwl_link_quality_cmd
*table
;
911 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
912 struct iwl_priv
*priv
= (struct iwl_priv
*)priv_r
;
913 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
914 enum mac80211_rate_control_flags mac_flags
;
916 struct iwl_scale_tbl_info tbl_type
;
917 struct iwl_scale_tbl_info
*curr_tbl
, *other_tbl
, *tmp_tbl
;
918 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
919 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
921 IWL_DEBUG_RATE_LIMIT(priv
, "get frame ack response, update rate scale window\n");
923 /* Treat uninitialized rate scaling data same as non-existing. */
925 IWL_DEBUG_RATE(priv
, "Station rate scaling not created yet.\n");
927 } else if (!lq_sta
->drv
) {
928 IWL_DEBUG_RATE(priv
, "Rate scaling not initialized yet.\n");
932 if (!ieee80211_is_data(hdr
->frame_control
) ||
933 info
->flags
& IEEE80211_TX_CTL_NO_ACK
)
936 /* This packet was aggregated but doesn't carry status info */
937 if ((info
->flags
& IEEE80211_TX_CTL_AMPDU
) &&
938 !(info
->flags
& IEEE80211_TX_STAT_AMPDU
))
942 * Ignore this Tx frame response if its initial rate doesn't match
943 * that of latest Link Quality command. There may be stragglers
944 * from a previous Link Quality command, but we're no longer interested
945 * in those; they're either from the "active" mode while we're trying
946 * to check "search" mode, or a prior "search" mode after we've moved
947 * to a new "search" mode (which might become the new "active" mode).
950 tx_rate
= le32_to_cpu(table
->rs_table
[0].rate_n_flags
);
951 rs_get_tbl_info_from_mcs(tx_rate
, priv
->band
, &tbl_type
, &rs_index
);
952 if (priv
->band
== IEEE80211_BAND_5GHZ
)
953 rs_index
-= IWL_FIRST_OFDM_RATE
;
954 mac_flags
= info
->status
.rates
[0].flags
;
955 mac_index
= info
->status
.rates
[0].idx
;
956 /* For HT packets, map MCS to PLCP */
957 if (mac_flags
& IEEE80211_TX_RC_MCS
) {
958 mac_index
&= RATE_MCS_CODE_MSK
; /* Remove # of streams */
959 if (mac_index
>= (IWL_RATE_9M_INDEX
- IWL_FIRST_OFDM_RATE
))
962 * mac80211 HT index is always zero-indexed; we need to move
963 * HT OFDM rates after CCK rates in 2.4 GHz band
965 if (priv
->band
== IEEE80211_BAND_2GHZ
)
966 mac_index
+= IWL_FIRST_OFDM_RATE
;
968 /* Here we actually compare this rate to the latest LQ command */
969 if ((mac_index
< 0) ||
970 (tbl_type
.is_SGI
!= !!(mac_flags
& IEEE80211_TX_RC_SHORT_GI
)) ||
971 (tbl_type
.is_ht40
!= !!(mac_flags
& IEEE80211_TX_RC_40_MHZ_WIDTH
)) ||
972 (tbl_type
.is_dup
!= !!(mac_flags
& IEEE80211_TX_RC_DUP_DATA
)) ||
973 (tbl_type
.ant_type
!= info
->antenna_sel_tx
) ||
974 (!!(tx_rate
& RATE_MCS_HT_MSK
) != !!(mac_flags
& IEEE80211_TX_RC_MCS
)) ||
975 (!!(tx_rate
& RATE_MCS_GF_MSK
) != !!(mac_flags
& IEEE80211_TX_RC_GREEN_FIELD
)) ||
976 (rs_index
!= mac_index
)) {
977 IWL_DEBUG_RATE(priv
, "initial rate %d does not match %d (0x%x)\n", mac_index
, rs_index
, tx_rate
);
979 * Since rates mis-match, the last LQ command may have failed.
980 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
983 lq_sta
->missed_rate_counter
++;
984 if (lq_sta
->missed_rate_counter
> IWL_MISSED_RATE_MAX
) {
985 lq_sta
->missed_rate_counter
= 0;
986 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
988 /* Regardless, ignore this status info for outdated rate */
991 /* Rate did match, so reset the missed_rate_counter */
992 lq_sta
->missed_rate_counter
= 0;
994 /* Figure out if rate scale algorithm is in active or search table */
995 if (table_type_matches(&tbl_type
,
996 &(lq_sta
->lq_info
[lq_sta
->active_tbl
]))) {
997 curr_tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
998 other_tbl
= &(lq_sta
->lq_info
[1 - lq_sta
->active_tbl
]);
999 } else if (table_type_matches(&tbl_type
,
1000 &lq_sta
->lq_info
[1 - lq_sta
->active_tbl
])) {
1001 curr_tbl
= &(lq_sta
->lq_info
[1 - lq_sta
->active_tbl
]);
1002 other_tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1004 IWL_DEBUG_RATE(priv
, "Neither active nor search matches tx rate\n");
1005 tmp_tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1006 IWL_DEBUG_RATE(priv
, "active- lq:%x, ant:%x, SGI:%d\n",
1007 tmp_tbl
->lq_type
, tmp_tbl
->ant_type
, tmp_tbl
->is_SGI
);
1008 tmp_tbl
= &(lq_sta
->lq_info
[1 - lq_sta
->active_tbl
]);
1009 IWL_DEBUG_RATE(priv
, "search- lq:%x, ant:%x, SGI:%d\n",
1010 tmp_tbl
->lq_type
, tmp_tbl
->ant_type
, tmp_tbl
->is_SGI
);
1011 IWL_DEBUG_RATE(priv
, "actual- lq:%x, ant:%x, SGI:%d\n",
1012 tbl_type
.lq_type
, tbl_type
.ant_type
, tbl_type
.is_SGI
);
1014 * no matching table found, let's by-pass the data collection
1015 * and continue to perform rate scale to find the rate table
1017 rs_stay_in_table(lq_sta
, true);
1022 * Updating the frame history depends on whether packets were
1025 * For aggregation, all packets were transmitted at the same rate, the
1026 * first index into rate scale table.
1028 if (info
->flags
& IEEE80211_TX_STAT_AMPDU
) {
1029 tx_rate
= le32_to_cpu(table
->rs_table
[0].rate_n_flags
);
1030 rs_get_tbl_info_from_mcs(tx_rate
, priv
->band
, &tbl_type
,
1032 rs_collect_tx_data(curr_tbl
, rs_index
,
1033 info
->status
.ampdu_len
,
1034 info
->status
.ampdu_ack_len
);
1036 /* Update success/fail counts if not searching for new mode */
1037 if (lq_sta
->stay_in_tbl
) {
1038 lq_sta
->total_success
+= info
->status
.ampdu_ack_len
;
1039 lq_sta
->total_failed
+= (info
->status
.ampdu_len
-
1040 info
->status
.ampdu_ack_len
);
1044 * For legacy, update frame history with for each Tx retry.
1046 retries
= info
->status
.rates
[0].count
- 1;
1047 /* HW doesn't send more than 15 retries */
1048 retries
= min(retries
, 15);
1050 /* The last transmission may have been successful */
1051 legacy_success
= !!(info
->flags
& IEEE80211_TX_STAT_ACK
);
1052 /* Collect data for each rate used during failed TX attempts */
1053 for (i
= 0; i
<= retries
; ++i
) {
1054 tx_rate
= le32_to_cpu(table
->rs_table
[i
].rate_n_flags
);
1055 rs_get_tbl_info_from_mcs(tx_rate
, priv
->band
,
1056 &tbl_type
, &rs_index
);
1058 * Only collect stats if retried rate is in the same RS
1059 * table as active/search.
1061 if (table_type_matches(&tbl_type
, curr_tbl
))
1063 else if (table_type_matches(&tbl_type
, other_tbl
))
1064 tmp_tbl
= other_tbl
;
1067 rs_collect_tx_data(tmp_tbl
, rs_index
, 1,
1068 i
< retries
? 0 : legacy_success
);
1071 /* Update success/fail counts if not searching for new mode */
1072 if (lq_sta
->stay_in_tbl
) {
1073 lq_sta
->total_success
+= legacy_success
;
1074 lq_sta
->total_failed
+= retries
+ (1 - legacy_success
);
1077 /* The last TX rate is cached in lq_sta; it's set in if/else above */
1078 lq_sta
->last_rate_n_flags
= tx_rate
;
1080 /* See if there's a better rate or modulation mode to try. */
1081 if (sta
&& sta
->supp_rates
[sband
->band
])
1082 rs_rate_scale_perform(priv
, skb
, sta
, lq_sta
);
1084 #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_SVTOOL)
1085 if ((priv
->tm_fixed_rate
) &&
1086 (priv
->tm_fixed_rate
!= lq_sta
->dbg_fixed_rate
))
1087 rs_program_fix_rate(priv
, lq_sta
);
1089 if (priv
->cfg
->bt_params
&& priv
->cfg
->bt_params
->advanced_bt_coexist
)
1090 rs_bt_update_lq(priv
, ctx
, lq_sta
);
1094 * Begin a period of staying with a selected modulation mode.
1095 * Set "stay_in_tbl" flag to prevent any mode switches.
1096 * Set frame tx success limits according to legacy vs. high-throughput,
1097 * and reset overall (spanning all rates) tx success history statistics.
1098 * These control how long we stay using same modulation mode before
1099 * searching for a new mode.
1101 static void rs_set_stay_in_table(struct iwl_priv
*priv
, u8 is_legacy
,
1102 struct iwl_lq_sta
*lq_sta
)
1104 IWL_DEBUG_RATE(priv
, "we are staying in the same table\n");
1105 lq_sta
->stay_in_tbl
= 1; /* only place this gets set */
1107 lq_sta
->table_count_limit
= IWL_LEGACY_TABLE_COUNT
;
1108 lq_sta
->max_failure_limit
= IWL_LEGACY_FAILURE_LIMIT
;
1109 lq_sta
->max_success_limit
= IWL_LEGACY_SUCCESS_LIMIT
;
1111 lq_sta
->table_count_limit
= IWL_NONE_LEGACY_TABLE_COUNT
;
1112 lq_sta
->max_failure_limit
= IWL_NONE_LEGACY_FAILURE_LIMIT
;
1113 lq_sta
->max_success_limit
= IWL_NONE_LEGACY_SUCCESS_LIMIT
;
1115 lq_sta
->table_count
= 0;
1116 lq_sta
->total_failed
= 0;
1117 lq_sta
->total_success
= 0;
1118 lq_sta
->flush_timer
= jiffies
;
1119 lq_sta
->action_counter
= 0;
1123 * Find correct throughput table for given mode of modulation
1125 static void rs_set_expected_tpt_table(struct iwl_lq_sta
*lq_sta
,
1126 struct iwl_scale_tbl_info
*tbl
)
1128 /* Used to choose among HT tables */
1129 s32 (*ht_tbl_pointer
)[IWL_RATE_COUNT
];
1131 /* Check for invalid LQ type */
1132 if (WARN_ON_ONCE(!is_legacy(tbl
->lq_type
) && !is_Ht(tbl
->lq_type
))) {
1133 tbl
->expected_tpt
= expected_tpt_legacy
;
1137 /* Legacy rates have only one table */
1138 if (is_legacy(tbl
->lq_type
)) {
1139 tbl
->expected_tpt
= expected_tpt_legacy
;
1143 /* Choose among many HT tables depending on number of streams
1144 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
1146 if (is_siso(tbl
->lq_type
) && (!tbl
->is_ht40
|| lq_sta
->is_dup
))
1147 ht_tbl_pointer
= expected_tpt_siso20MHz
;
1148 else if (is_siso(tbl
->lq_type
))
1149 ht_tbl_pointer
= expected_tpt_siso40MHz
;
1150 else if (is_mimo2(tbl
->lq_type
) && (!tbl
->is_ht40
|| lq_sta
->is_dup
))
1151 ht_tbl_pointer
= expected_tpt_mimo2_20MHz
;
1152 else if (is_mimo2(tbl
->lq_type
))
1153 ht_tbl_pointer
= expected_tpt_mimo2_40MHz
;
1154 else if (is_mimo3(tbl
->lq_type
) && (!tbl
->is_ht40
|| lq_sta
->is_dup
))
1155 ht_tbl_pointer
= expected_tpt_mimo3_20MHz
;
1156 else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
1157 ht_tbl_pointer
= expected_tpt_mimo3_40MHz
;
1159 if (!tbl
->is_SGI
&& !lq_sta
->is_agg
) /* Normal */
1160 tbl
->expected_tpt
= ht_tbl_pointer
[0];
1161 else if (tbl
->is_SGI
&& !lq_sta
->is_agg
) /* SGI */
1162 tbl
->expected_tpt
= ht_tbl_pointer
[1];
1163 else if (!tbl
->is_SGI
&& lq_sta
->is_agg
) /* AGG */
1164 tbl
->expected_tpt
= ht_tbl_pointer
[2];
1166 tbl
->expected_tpt
= ht_tbl_pointer
[3];
1170 * Find starting rate for new "search" high-throughput mode of modulation.
1171 * Goal is to find lowest expected rate (under perfect conditions) that is
1172 * above the current measured throughput of "active" mode, to give new mode
1173 * a fair chance to prove itself without too many challenges.
1175 * This gets called when transitioning to more aggressive modulation
1176 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1177 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1178 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1179 * bit rate will typically need to increase, but not if performance was bad.
1181 static s32
rs_get_best_rate(struct iwl_priv
*priv
,
1182 struct iwl_lq_sta
*lq_sta
,
1183 struct iwl_scale_tbl_info
*tbl
, /* "search" */
1184 u16 rate_mask
, s8 index
)
1186 /* "active" values */
1187 struct iwl_scale_tbl_info
*active_tbl
=
1188 &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1189 s32 active_sr
= active_tbl
->win
[index
].success_ratio
;
1190 s32 active_tpt
= active_tbl
->expected_tpt
[index
];
1192 /* expected "search" throughput */
1193 s32
*tpt_tbl
= tbl
->expected_tpt
;
1195 s32 new_rate
, high
, low
, start_hi
;
1199 new_rate
= high
= low
= start_hi
= IWL_RATE_INVALID
;
1202 high_low
= rs_get_adjacent_rate(priv
, rate
, rate_mask
,
1205 low
= high_low
& 0xff;
1206 high
= (high_low
>> 8) & 0xff;
1209 * Lower the "search" bit rate, to give new "search" mode
1210 * approximately the same throughput as "active" if:
1212 * 1) "Active" mode has been working modestly well (but not
1213 * great), and expected "search" throughput (under perfect
1214 * conditions) at candidate rate is above the actual
1215 * measured "active" throughput (but less than expected
1216 * "active" throughput under perfect conditions).
1218 * 2) "Active" mode has been working perfectly or very well
1219 * and expected "search" throughput (under perfect
1220 * conditions) at candidate rate is above expected
1221 * "active" throughput (under perfect conditions).
1223 if ((((100 * tpt_tbl
[rate
]) > lq_sta
->last_tpt
) &&
1224 ((active_sr
> IWL_RATE_DECREASE_TH
) &&
1225 (active_sr
<= IWL_RATE_HIGH_TH
) &&
1226 (tpt_tbl
[rate
] <= active_tpt
))) ||
1227 ((active_sr
>= IWL_RATE_SCALE_SWITCH
) &&
1228 (tpt_tbl
[rate
] > active_tpt
))) {
1230 /* (2nd or later pass)
1231 * If we've already tried to raise the rate, and are
1232 * now trying to lower it, use the higher rate. */
1233 if (start_hi
!= IWL_RATE_INVALID
) {
1234 new_rate
= start_hi
;
1240 /* Loop again with lower rate */
1241 if (low
!= IWL_RATE_INVALID
)
1244 /* Lower rate not available, use the original */
1248 /* Else try to raise the "search" rate to match "active" */
1250 /* (2nd or later pass)
1251 * If we've already tried to lower the rate, and are
1252 * now trying to raise it, use the lower rate. */
1253 if (new_rate
!= IWL_RATE_INVALID
)
1256 /* Loop again with higher rate */
1257 else if (high
!= IWL_RATE_INVALID
) {
1261 /* Higher rate not available, use the original */
1273 * Set up search table for MIMO2
1275 static int rs_switch_to_mimo2(struct iwl_priv
*priv
,
1276 struct iwl_lq_sta
*lq_sta
,
1277 struct ieee80211_conf
*conf
,
1278 struct ieee80211_sta
*sta
,
1279 struct iwl_scale_tbl_info
*tbl
, int index
)
1283 s8 is_green
= lq_sta
->is_green
;
1284 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
1285 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
1287 if (!conf_is_ht(conf
) || !sta
->ht_cap
.ht_supported
)
1290 if (((sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SM_PS
) >> 2)
1291 == WLAN_HT_CAP_SM_PS_STATIC
)
1294 /* Need both Tx chains/antennas to support MIMO */
1295 if (hw_params(priv
).tx_chains_num
< 2)
1298 IWL_DEBUG_RATE(priv
, "LQ: try to switch to MIMO2\n");
1300 tbl
->lq_type
= LQ_MIMO2
;
1301 tbl
->is_dup
= lq_sta
->is_dup
;
1303 tbl
->max_search
= IWL_MAX_SEARCH
;
1304 rate_mask
= lq_sta
->active_mimo2_rate
;
1306 if (iwl_is_ht40_tx_allowed(priv
, ctx
, &sta
->ht_cap
))
1311 rs_set_expected_tpt_table(lq_sta
, tbl
);
1313 rate
= rs_get_best_rate(priv
, lq_sta
, tbl
, rate_mask
, index
);
1315 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 best rate %d mask %X\n", rate
, rate_mask
);
1316 if ((rate
== IWL_RATE_INVALID
) || !((1 << rate
) & rate_mask
)) {
1317 IWL_DEBUG_RATE(priv
, "Can't switch with index %d rate mask %x\n",
1321 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, rate
, is_green
);
1323 IWL_DEBUG_RATE(priv
, "LQ: Switch to new mcs %X index is green %X\n",
1324 tbl
->current_rate
, is_green
);
1329 * Set up search table for MIMO3
1331 static int rs_switch_to_mimo3(struct iwl_priv
*priv
,
1332 struct iwl_lq_sta
*lq_sta
,
1333 struct ieee80211_conf
*conf
,
1334 struct ieee80211_sta
*sta
,
1335 struct iwl_scale_tbl_info
*tbl
, int index
)
1339 s8 is_green
= lq_sta
->is_green
;
1340 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
1341 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
1343 if (!conf_is_ht(conf
) || !sta
->ht_cap
.ht_supported
)
1346 if (((sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SM_PS
) >> 2)
1347 == WLAN_HT_CAP_SM_PS_STATIC
)
1350 /* Need both Tx chains/antennas to support MIMO */
1351 if (hw_params(priv
).tx_chains_num
< 3)
1354 IWL_DEBUG_RATE(priv
, "LQ: try to switch to MIMO3\n");
1356 tbl
->lq_type
= LQ_MIMO3
;
1357 tbl
->is_dup
= lq_sta
->is_dup
;
1359 tbl
->max_search
= IWL_MAX_11N_MIMO3_SEARCH
;
1360 rate_mask
= lq_sta
->active_mimo3_rate
;
1362 if (iwl_is_ht40_tx_allowed(priv
, ctx
, &sta
->ht_cap
))
1367 rs_set_expected_tpt_table(lq_sta
, tbl
);
1369 rate
= rs_get_best_rate(priv
, lq_sta
, tbl
, rate_mask
, index
);
1371 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 best rate %d mask %X\n",
1373 if ((rate
== IWL_RATE_INVALID
) || !((1 << rate
) & rate_mask
)) {
1374 IWL_DEBUG_RATE(priv
, "Can't switch with index %d rate mask %x\n",
1378 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, rate
, is_green
);
1380 IWL_DEBUG_RATE(priv
, "LQ: Switch to new mcs %X index is green %X\n",
1381 tbl
->current_rate
, is_green
);
1386 * Set up search table for SISO
1388 static int rs_switch_to_siso(struct iwl_priv
*priv
,
1389 struct iwl_lq_sta
*lq_sta
,
1390 struct ieee80211_conf
*conf
,
1391 struct ieee80211_sta
*sta
,
1392 struct iwl_scale_tbl_info
*tbl
, int index
)
1395 u8 is_green
= lq_sta
->is_green
;
1397 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
1398 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
1400 if (!conf_is_ht(conf
) || !sta
->ht_cap
.ht_supported
)
1403 IWL_DEBUG_RATE(priv
, "LQ: try to switch to SISO\n");
1405 tbl
->is_dup
= lq_sta
->is_dup
;
1406 tbl
->lq_type
= LQ_SISO
;
1408 tbl
->max_search
= IWL_MAX_SEARCH
;
1409 rate_mask
= lq_sta
->active_siso_rate
;
1411 if (iwl_is_ht40_tx_allowed(priv
, ctx
, &sta
->ht_cap
))
1417 tbl
->is_SGI
= 0; /*11n spec: no SGI in SISO+Greenfield*/
1419 rs_set_expected_tpt_table(lq_sta
, tbl
);
1420 rate
= rs_get_best_rate(priv
, lq_sta
, tbl
, rate_mask
, index
);
1422 IWL_DEBUG_RATE(priv
, "LQ: get best rate %d mask %X\n", rate
, rate_mask
);
1423 if ((rate
== IWL_RATE_INVALID
) || !((1 << rate
) & rate_mask
)) {
1424 IWL_DEBUG_RATE(priv
, "can not switch with index %d rate mask %x\n",
1428 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, rate
, is_green
);
1429 IWL_DEBUG_RATE(priv
, "LQ: Switch to new mcs %X index is green %X\n",
1430 tbl
->current_rate
, is_green
);
1435 * Try to switch to new modulation mode from legacy
1437 static int rs_move_legacy_other(struct iwl_priv
*priv
,
1438 struct iwl_lq_sta
*lq_sta
,
1439 struct ieee80211_conf
*conf
,
1440 struct ieee80211_sta
*sta
,
1443 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1444 struct iwl_scale_tbl_info
*search_tbl
=
1445 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1446 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1447 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1448 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1450 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1451 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1453 u8 update_search_tbl_counter
= 0;
1455 switch (priv
->bt_traffic_load
) {
1456 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1459 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1460 /* avoid antenna B unless MIMO */
1462 first_antenna(hw_params(priv
).valid_tx_ant
);
1463 if (tbl
->action
== IWL_LEGACY_SWITCH_ANTENNA2
)
1464 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1466 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1467 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1468 /* avoid antenna B and MIMO */
1470 first_antenna(hw_params(priv
).valid_tx_ant
);
1471 if (tbl
->action
>= IWL_LEGACY_SWITCH_ANTENNA2
&&
1472 tbl
->action
!= IWL_LEGACY_SWITCH_SISO
)
1473 tbl
->action
= IWL_LEGACY_SWITCH_SISO
;
1476 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1480 if (!iwl_ht_enabled(priv
))
1481 /* stay in Legacy */
1482 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1483 else if (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
&&
1484 tbl
->action
> IWL_LEGACY_SWITCH_SISO
)
1485 tbl
->action
= IWL_LEGACY_SWITCH_SISO
;
1487 /* configure as 1x1 if bt full concurrency */
1488 if (priv
->bt_full_concurrent
) {
1489 if (!iwl_ht_enabled(priv
))
1490 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1491 else if (tbl
->action
>= IWL_LEGACY_SWITCH_ANTENNA2
)
1492 tbl
->action
= IWL_LEGACY_SWITCH_SISO
;
1494 first_antenna(hw_params(priv
).valid_tx_ant
);
1497 start_action
= tbl
->action
;
1499 lq_sta
->action_counter
++;
1500 switch (tbl
->action
) {
1501 case IWL_LEGACY_SWITCH_ANTENNA1
:
1502 case IWL_LEGACY_SWITCH_ANTENNA2
:
1503 IWL_DEBUG_RATE(priv
, "LQ: Legacy toggle Antenna\n");
1505 if ((tbl
->action
== IWL_LEGACY_SWITCH_ANTENNA1
&&
1506 tx_chains_num
<= 1) ||
1507 (tbl
->action
== IWL_LEGACY_SWITCH_ANTENNA2
&&
1508 tx_chains_num
<= 2))
1511 /* Don't change antenna if success has been great */
1512 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
&&
1513 !priv
->bt_full_concurrent
&&
1514 priv
->bt_traffic_load
==
1515 IWL_BT_COEX_TRAFFIC_LOAD_NONE
)
1518 /* Set up search table to try other antenna */
1519 memcpy(search_tbl
, tbl
, sz
);
1521 if (rs_toggle_antenna(valid_tx_ant
,
1522 &search_tbl
->current_rate
, search_tbl
)) {
1523 update_search_tbl_counter
= 1;
1524 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
1528 case IWL_LEGACY_SWITCH_SISO
:
1529 IWL_DEBUG_RATE(priv
, "LQ: Legacy switch to SISO\n");
1531 /* Set up search table to try SISO */
1532 memcpy(search_tbl
, tbl
, sz
);
1533 search_tbl
->is_SGI
= 0;
1534 ret
= rs_switch_to_siso(priv
, lq_sta
, conf
, sta
,
1537 lq_sta
->action_counter
= 0;
1542 case IWL_LEGACY_SWITCH_MIMO2_AB
:
1543 case IWL_LEGACY_SWITCH_MIMO2_AC
:
1544 case IWL_LEGACY_SWITCH_MIMO2_BC
:
1545 IWL_DEBUG_RATE(priv
, "LQ: Legacy switch to MIMO2\n");
1547 /* Set up search table to try MIMO */
1548 memcpy(search_tbl
, tbl
, sz
);
1549 search_tbl
->is_SGI
= 0;
1551 if (tbl
->action
== IWL_LEGACY_SWITCH_MIMO2_AB
)
1552 search_tbl
->ant_type
= ANT_AB
;
1553 else if (tbl
->action
== IWL_LEGACY_SWITCH_MIMO2_AC
)
1554 search_tbl
->ant_type
= ANT_AC
;
1556 search_tbl
->ant_type
= ANT_BC
;
1558 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1561 ret
= rs_switch_to_mimo2(priv
, lq_sta
, conf
, sta
,
1564 lq_sta
->action_counter
= 0;
1569 case IWL_LEGACY_SWITCH_MIMO3_ABC
:
1570 IWL_DEBUG_RATE(priv
, "LQ: Legacy switch to MIMO3\n");
1572 /* Set up search table to try MIMO3 */
1573 memcpy(search_tbl
, tbl
, sz
);
1574 search_tbl
->is_SGI
= 0;
1576 search_tbl
->ant_type
= ANT_ABC
;
1578 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1581 ret
= rs_switch_to_mimo3(priv
, lq_sta
, conf
, sta
,
1584 lq_sta
->action_counter
= 0;
1590 if (tbl
->action
> IWL_LEGACY_SWITCH_MIMO3_ABC
)
1591 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1593 if (tbl
->action
== start_action
)
1597 search_tbl
->lq_type
= LQ_NONE
;
1601 lq_sta
->search_better_tbl
= 1;
1603 if (tbl
->action
> IWL_LEGACY_SWITCH_MIMO3_ABC
)
1604 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1605 if (update_search_tbl_counter
)
1606 search_tbl
->action
= tbl
->action
;
1612 * Try to switch to new modulation mode from SISO
1614 static int rs_move_siso_to_other(struct iwl_priv
*priv
,
1615 struct iwl_lq_sta
*lq_sta
,
1616 struct ieee80211_conf
*conf
,
1617 struct ieee80211_sta
*sta
, int index
)
1619 u8 is_green
= lq_sta
->is_green
;
1620 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1621 struct iwl_scale_tbl_info
*search_tbl
=
1622 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1623 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1624 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
1625 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1626 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1628 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1629 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1630 u8 update_search_tbl_counter
= 0;
1633 switch (priv
->bt_traffic_load
) {
1634 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1637 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1638 /* avoid antenna B unless MIMO */
1640 first_antenna(hw_params(priv
).valid_tx_ant
);
1641 if (tbl
->action
== IWL_SISO_SWITCH_ANTENNA2
)
1642 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1644 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1645 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1646 /* avoid antenna B and MIMO */
1648 first_antenna(hw_params(priv
).valid_tx_ant
);
1649 if (tbl
->action
!= IWL_SISO_SWITCH_ANTENNA1
)
1650 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1653 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1657 if (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
&&
1658 tbl
->action
> IWL_SISO_SWITCH_ANTENNA2
) {
1660 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1663 /* configure as 1x1 if bt full concurrency */
1664 if (priv
->bt_full_concurrent
) {
1666 first_antenna(hw_params(priv
).valid_tx_ant
);
1667 if (tbl
->action
>= IWL_LEGACY_SWITCH_ANTENNA2
)
1668 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1671 start_action
= tbl
->action
;
1673 lq_sta
->action_counter
++;
1674 switch (tbl
->action
) {
1675 case IWL_SISO_SWITCH_ANTENNA1
:
1676 case IWL_SISO_SWITCH_ANTENNA2
:
1677 IWL_DEBUG_RATE(priv
, "LQ: SISO toggle Antenna\n");
1678 if ((tbl
->action
== IWL_SISO_SWITCH_ANTENNA1
&&
1679 tx_chains_num
<= 1) ||
1680 (tbl
->action
== IWL_SISO_SWITCH_ANTENNA2
&&
1681 tx_chains_num
<= 2))
1684 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
&&
1685 !priv
->bt_full_concurrent
&&
1686 priv
->bt_traffic_load
==
1687 IWL_BT_COEX_TRAFFIC_LOAD_NONE
)
1690 memcpy(search_tbl
, tbl
, sz
);
1691 if (rs_toggle_antenna(valid_tx_ant
,
1692 &search_tbl
->current_rate
, search_tbl
)) {
1693 update_search_tbl_counter
= 1;
1697 case IWL_SISO_SWITCH_MIMO2_AB
:
1698 case IWL_SISO_SWITCH_MIMO2_AC
:
1699 case IWL_SISO_SWITCH_MIMO2_BC
:
1700 IWL_DEBUG_RATE(priv
, "LQ: SISO switch to MIMO2\n");
1701 memcpy(search_tbl
, tbl
, sz
);
1702 search_tbl
->is_SGI
= 0;
1704 if (tbl
->action
== IWL_SISO_SWITCH_MIMO2_AB
)
1705 search_tbl
->ant_type
= ANT_AB
;
1706 else if (tbl
->action
== IWL_SISO_SWITCH_MIMO2_AC
)
1707 search_tbl
->ant_type
= ANT_AC
;
1709 search_tbl
->ant_type
= ANT_BC
;
1711 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1714 ret
= rs_switch_to_mimo2(priv
, lq_sta
, conf
, sta
,
1719 case IWL_SISO_SWITCH_GI
:
1720 if (!tbl
->is_ht40
&& !(ht_cap
->cap
&
1721 IEEE80211_HT_CAP_SGI_20
))
1723 if (tbl
->is_ht40
&& !(ht_cap
->cap
&
1724 IEEE80211_HT_CAP_SGI_40
))
1727 IWL_DEBUG_RATE(priv
, "LQ: SISO toggle SGI/NGI\n");
1729 memcpy(search_tbl
, tbl
, sz
);
1735 "SGI was set in GF+SISO\n");
1737 search_tbl
->is_SGI
= !tbl
->is_SGI
;
1738 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
1740 s32 tpt
= lq_sta
->last_tpt
/ 100;
1741 if (tpt
>= search_tbl
->expected_tpt
[index
])
1744 search_tbl
->current_rate
=
1745 rate_n_flags_from_tbl(priv
, search_tbl
,
1747 update_search_tbl_counter
= 1;
1749 case IWL_SISO_SWITCH_MIMO3_ABC
:
1750 IWL_DEBUG_RATE(priv
, "LQ: SISO switch to MIMO3\n");
1751 memcpy(search_tbl
, tbl
, sz
);
1752 search_tbl
->is_SGI
= 0;
1753 search_tbl
->ant_type
= ANT_ABC
;
1755 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1758 ret
= rs_switch_to_mimo3(priv
, lq_sta
, conf
, sta
,
1765 if (tbl
->action
> IWL_LEGACY_SWITCH_MIMO3_ABC
)
1766 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1768 if (tbl
->action
== start_action
)
1771 search_tbl
->lq_type
= LQ_NONE
;
1775 lq_sta
->search_better_tbl
= 1;
1777 if (tbl
->action
> IWL_SISO_SWITCH_MIMO3_ABC
)
1778 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1779 if (update_search_tbl_counter
)
1780 search_tbl
->action
= tbl
->action
;
1786 * Try to switch to new modulation mode from MIMO2
1788 static int rs_move_mimo2_to_other(struct iwl_priv
*priv
,
1789 struct iwl_lq_sta
*lq_sta
,
1790 struct ieee80211_conf
*conf
,
1791 struct ieee80211_sta
*sta
, int index
)
1793 s8 is_green
= lq_sta
->is_green
;
1794 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1795 struct iwl_scale_tbl_info
*search_tbl
=
1796 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1797 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1798 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
1799 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1800 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1802 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1803 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1804 u8 update_search_tbl_counter
= 0;
1807 switch (priv
->bt_traffic_load
) {
1808 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1811 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1812 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1813 /* avoid antenna B and MIMO */
1814 if (tbl
->action
!= IWL_MIMO2_SWITCH_SISO_A
)
1815 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1817 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1818 /* avoid antenna B unless MIMO */
1819 if (tbl
->action
== IWL_MIMO2_SWITCH_SISO_B
||
1820 tbl
->action
== IWL_MIMO2_SWITCH_SISO_C
)
1821 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1824 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1828 if ((iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
) &&
1829 (tbl
->action
< IWL_MIMO2_SWITCH_SISO_A
||
1830 tbl
->action
> IWL_MIMO2_SWITCH_SISO_C
)) {
1831 /* switch in SISO */
1832 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1835 /* configure as 1x1 if bt full concurrency */
1836 if (priv
->bt_full_concurrent
&&
1837 (tbl
->action
< IWL_MIMO2_SWITCH_SISO_A
||
1838 tbl
->action
> IWL_MIMO2_SWITCH_SISO_C
))
1839 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1841 start_action
= tbl
->action
;
1843 lq_sta
->action_counter
++;
1844 switch (tbl
->action
) {
1845 case IWL_MIMO2_SWITCH_ANTENNA1
:
1846 case IWL_MIMO2_SWITCH_ANTENNA2
:
1847 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 toggle Antennas\n");
1849 if (tx_chains_num
<= 2)
1852 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
)
1855 memcpy(search_tbl
, tbl
, sz
);
1856 if (rs_toggle_antenna(valid_tx_ant
,
1857 &search_tbl
->current_rate
, search_tbl
)) {
1858 update_search_tbl_counter
= 1;
1862 case IWL_MIMO2_SWITCH_SISO_A
:
1863 case IWL_MIMO2_SWITCH_SISO_B
:
1864 case IWL_MIMO2_SWITCH_SISO_C
:
1865 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 switch to SISO\n");
1867 /* Set up new search table for SISO */
1868 memcpy(search_tbl
, tbl
, sz
);
1870 if (tbl
->action
== IWL_MIMO2_SWITCH_SISO_A
)
1871 search_tbl
->ant_type
= ANT_A
;
1872 else if (tbl
->action
== IWL_MIMO2_SWITCH_SISO_B
)
1873 search_tbl
->ant_type
= ANT_B
;
1875 search_tbl
->ant_type
= ANT_C
;
1877 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1880 ret
= rs_switch_to_siso(priv
, lq_sta
, conf
, sta
,
1887 case IWL_MIMO2_SWITCH_GI
:
1888 if (!tbl
->is_ht40
&& !(ht_cap
->cap
&
1889 IEEE80211_HT_CAP_SGI_20
))
1891 if (tbl
->is_ht40
&& !(ht_cap
->cap
&
1892 IEEE80211_HT_CAP_SGI_40
))
1895 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 toggle SGI/NGI\n");
1897 /* Set up new search table for MIMO2 */
1898 memcpy(search_tbl
, tbl
, sz
);
1899 search_tbl
->is_SGI
= !tbl
->is_SGI
;
1900 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
1902 * If active table already uses the fastest possible
1903 * modulation (dual stream with short guard interval),
1904 * and it's working well, there's no need to look
1905 * for a better type of modulation!
1908 s32 tpt
= lq_sta
->last_tpt
/ 100;
1909 if (tpt
>= search_tbl
->expected_tpt
[index
])
1912 search_tbl
->current_rate
=
1913 rate_n_flags_from_tbl(priv
, search_tbl
,
1915 update_search_tbl_counter
= 1;
1918 case IWL_MIMO2_SWITCH_MIMO3_ABC
:
1919 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 switch to MIMO3\n");
1920 memcpy(search_tbl
, tbl
, sz
);
1921 search_tbl
->is_SGI
= 0;
1922 search_tbl
->ant_type
= ANT_ABC
;
1924 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1927 ret
= rs_switch_to_mimo3(priv
, lq_sta
, conf
, sta
,
1935 if (tbl
->action
> IWL_MIMO2_SWITCH_MIMO3_ABC
)
1936 tbl
->action
= IWL_MIMO2_SWITCH_ANTENNA1
;
1938 if (tbl
->action
== start_action
)
1941 search_tbl
->lq_type
= LQ_NONE
;
1944 lq_sta
->search_better_tbl
= 1;
1946 if (tbl
->action
> IWL_MIMO2_SWITCH_MIMO3_ABC
)
1947 tbl
->action
= IWL_MIMO2_SWITCH_ANTENNA1
;
1948 if (update_search_tbl_counter
)
1949 search_tbl
->action
= tbl
->action
;
1956 * Try to switch to new modulation mode from MIMO3
1958 static int rs_move_mimo3_to_other(struct iwl_priv
*priv
,
1959 struct iwl_lq_sta
*lq_sta
,
1960 struct ieee80211_conf
*conf
,
1961 struct ieee80211_sta
*sta
, int index
)
1963 s8 is_green
= lq_sta
->is_green
;
1964 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1965 struct iwl_scale_tbl_info
*search_tbl
=
1966 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1967 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1968 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
1969 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1970 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1972 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1973 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1975 u8 update_search_tbl_counter
= 0;
1977 switch (priv
->bt_traffic_load
) {
1978 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1981 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1982 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1983 /* avoid antenna B and MIMO */
1984 if (tbl
->action
!= IWL_MIMO3_SWITCH_SISO_A
)
1985 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
1987 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1988 /* avoid antenna B unless MIMO */
1989 if (tbl
->action
== IWL_MIMO3_SWITCH_SISO_B
||
1990 tbl
->action
== IWL_MIMO3_SWITCH_SISO_C
)
1991 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
1994 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1998 if ((iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
) &&
1999 (tbl
->action
< IWL_MIMO3_SWITCH_SISO_A
||
2000 tbl
->action
> IWL_MIMO3_SWITCH_SISO_C
)) {
2001 /* switch in SISO */
2002 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
2005 /* configure as 1x1 if bt full concurrency */
2006 if (priv
->bt_full_concurrent
&&
2007 (tbl
->action
< IWL_MIMO3_SWITCH_SISO_A
||
2008 tbl
->action
> IWL_MIMO3_SWITCH_SISO_C
))
2009 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
2011 start_action
= tbl
->action
;
2013 lq_sta
->action_counter
++;
2014 switch (tbl
->action
) {
2015 case IWL_MIMO3_SWITCH_ANTENNA1
:
2016 case IWL_MIMO3_SWITCH_ANTENNA2
:
2017 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 toggle Antennas\n");
2019 if (tx_chains_num
<= 3)
2022 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
)
2025 memcpy(search_tbl
, tbl
, sz
);
2026 if (rs_toggle_antenna(valid_tx_ant
,
2027 &search_tbl
->current_rate
, search_tbl
))
2030 case IWL_MIMO3_SWITCH_SISO_A
:
2031 case IWL_MIMO3_SWITCH_SISO_B
:
2032 case IWL_MIMO3_SWITCH_SISO_C
:
2033 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 switch to SISO\n");
2035 /* Set up new search table for SISO */
2036 memcpy(search_tbl
, tbl
, sz
);
2038 if (tbl
->action
== IWL_MIMO3_SWITCH_SISO_A
)
2039 search_tbl
->ant_type
= ANT_A
;
2040 else if (tbl
->action
== IWL_MIMO3_SWITCH_SISO_B
)
2041 search_tbl
->ant_type
= ANT_B
;
2043 search_tbl
->ant_type
= ANT_C
;
2045 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
2048 ret
= rs_switch_to_siso(priv
, lq_sta
, conf
, sta
,
2055 case IWL_MIMO3_SWITCH_MIMO2_AB
:
2056 case IWL_MIMO3_SWITCH_MIMO2_AC
:
2057 case IWL_MIMO3_SWITCH_MIMO2_BC
:
2058 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 switch to MIMO2\n");
2060 memcpy(search_tbl
, tbl
, sz
);
2061 search_tbl
->is_SGI
= 0;
2062 if (tbl
->action
== IWL_MIMO3_SWITCH_MIMO2_AB
)
2063 search_tbl
->ant_type
= ANT_AB
;
2064 else if (tbl
->action
== IWL_MIMO3_SWITCH_MIMO2_AC
)
2065 search_tbl
->ant_type
= ANT_AC
;
2067 search_tbl
->ant_type
= ANT_BC
;
2069 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
2072 ret
= rs_switch_to_mimo2(priv
, lq_sta
, conf
, sta
,
2079 case IWL_MIMO3_SWITCH_GI
:
2080 if (!tbl
->is_ht40
&& !(ht_cap
->cap
&
2081 IEEE80211_HT_CAP_SGI_20
))
2083 if (tbl
->is_ht40
&& !(ht_cap
->cap
&
2084 IEEE80211_HT_CAP_SGI_40
))
2087 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 toggle SGI/NGI\n");
2089 /* Set up new search table for MIMO */
2090 memcpy(search_tbl
, tbl
, sz
);
2091 search_tbl
->is_SGI
= !tbl
->is_SGI
;
2092 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
2094 * If active table already uses the fastest possible
2095 * modulation (dual stream with short guard interval),
2096 * and it's working well, there's no need to look
2097 * for a better type of modulation!
2100 s32 tpt
= lq_sta
->last_tpt
/ 100;
2101 if (tpt
>= search_tbl
->expected_tpt
[index
])
2104 search_tbl
->current_rate
=
2105 rate_n_flags_from_tbl(priv
, search_tbl
,
2107 update_search_tbl_counter
= 1;
2111 if (tbl
->action
> IWL_MIMO3_SWITCH_GI
)
2112 tbl
->action
= IWL_MIMO3_SWITCH_ANTENNA1
;
2114 if (tbl
->action
== start_action
)
2117 search_tbl
->lq_type
= LQ_NONE
;
2120 lq_sta
->search_better_tbl
= 1;
2122 if (tbl
->action
> IWL_MIMO3_SWITCH_GI
)
2123 tbl
->action
= IWL_MIMO3_SWITCH_ANTENNA1
;
2124 if (update_search_tbl_counter
)
2125 search_tbl
->action
= tbl
->action
;
2132 * Check whether we should continue using same modulation mode, or
2133 * begin search for a new mode, based on:
2134 * 1) # tx successes or failures while using this mode
2135 * 2) # times calling this function
2136 * 3) elapsed time in this mode (not used, for now)
2138 static void rs_stay_in_table(struct iwl_lq_sta
*lq_sta
, bool force_search
)
2140 struct iwl_scale_tbl_info
*tbl
;
2143 int flush_interval_passed
= 0;
2144 struct iwl_priv
*priv
;
2147 active_tbl
= lq_sta
->active_tbl
;
2149 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2151 /* If we've been disallowing search, see if we should now allow it */
2152 if (lq_sta
->stay_in_tbl
) {
2154 /* Elapsed time using current modulation mode */
2155 if (lq_sta
->flush_timer
)
2156 flush_interval_passed
=
2158 (unsigned long)(lq_sta
->flush_timer
+
2159 IWL_RATE_SCALE_FLUSH_INTVL
));
2162 * Check if we should allow search for new modulation mode.
2163 * If many frames have failed or succeeded, or we've used
2164 * this same modulation for a long time, allow search, and
2165 * reset history stats that keep track of whether we should
2166 * allow a new search. Also (below) reset all bitmaps and
2167 * stats in active history.
2170 (lq_sta
->total_failed
> lq_sta
->max_failure_limit
) ||
2171 (lq_sta
->total_success
> lq_sta
->max_success_limit
) ||
2172 ((!lq_sta
->search_better_tbl
) && (lq_sta
->flush_timer
)
2173 && (flush_interval_passed
))) {
2174 IWL_DEBUG_RATE(priv
, "LQ: stay is expired %d %d %d\n:",
2175 lq_sta
->total_failed
,
2176 lq_sta
->total_success
,
2177 flush_interval_passed
);
2179 /* Allow search for new mode */
2180 lq_sta
->stay_in_tbl
= 0; /* only place reset */
2181 lq_sta
->total_failed
= 0;
2182 lq_sta
->total_success
= 0;
2183 lq_sta
->flush_timer
= 0;
2186 * Else if we've used this modulation mode enough repetitions
2187 * (regardless of elapsed time or success/failure), reset
2188 * history bitmaps and rate-specific stats for all rates in
2192 lq_sta
->table_count
++;
2193 if (lq_sta
->table_count
>=
2194 lq_sta
->table_count_limit
) {
2195 lq_sta
->table_count
= 0;
2197 IWL_DEBUG_RATE(priv
, "LQ: stay in table clear win\n");
2198 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2199 rs_rate_scale_clear_window(
2204 /* If transitioning to allow "search", reset all history
2205 * bitmaps and stats in active table (this will become the new
2206 * "search" table). */
2207 if (!lq_sta
->stay_in_tbl
) {
2208 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2209 rs_rate_scale_clear_window(&(tbl
->win
[i
]));
2215 * setup rate table in uCode
2217 static void rs_update_rate_tbl(struct iwl_priv
*priv
,
2218 struct iwl_rxon_context
*ctx
,
2219 struct iwl_lq_sta
*lq_sta
,
2220 struct iwl_scale_tbl_info
*tbl
,
2221 int index
, u8 is_green
)
2225 /* Update uCode's rate table. */
2226 rate
= rate_n_flags_from_tbl(priv
, tbl
, index
, is_green
);
2227 rs_fill_link_cmd(priv
, lq_sta
, rate
);
2228 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
2232 * Do rate scaling and search for new modulation mode.
2234 static void rs_rate_scale_perform(struct iwl_priv
*priv
,
2235 struct sk_buff
*skb
,
2236 struct ieee80211_sta
*sta
,
2237 struct iwl_lq_sta
*lq_sta
)
2239 struct ieee80211_hw
*hw
= priv
->hw
;
2240 struct ieee80211_conf
*conf
= &hw
->conf
;
2241 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2242 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
2243 int low
= IWL_RATE_INVALID
;
2244 int high
= IWL_RATE_INVALID
;
2247 struct iwl_rate_scale_data
*window
= NULL
;
2248 int current_tpt
= IWL_INVALID_VALUE
;
2249 int low_tpt
= IWL_INVALID_VALUE
;
2250 int high_tpt
= IWL_INVALID_VALUE
;
2252 s8 scale_action
= 0;
2255 struct iwl_scale_tbl_info
*tbl
, *tbl1
;
2256 u16 rate_scale_index_msk
= 0;
2262 u8 tid
= IWL_MAX_TID_COUNT
;
2263 struct iwl_tid_data
*tid_data
;
2264 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
2265 struct iwl_rxon_context
*ctx
= sta_priv
->ctx
;
2267 IWL_DEBUG_RATE(priv
, "rate scale calculate new rate for skb\n");
2269 /* Send management frames and NO_ACK data using lowest rate. */
2270 /* TODO: this could probably be improved.. */
2271 if (!ieee80211_is_data(hdr
->frame_control
) ||
2272 info
->flags
& IEEE80211_TX_CTL_NO_ACK
)
2275 lq_sta
->supp_rates
= sta
->supp_rates
[lq_sta
->band
];
2277 tid
= rs_tl_add_packet(lq_sta
, hdr
);
2278 if ((tid
!= IWL_MAX_TID_COUNT
) &&
2279 (lq_sta
->tx_agg_tid_en
& (1 << tid
))) {
2280 tid_data
= &priv
->shrd
->tid_data
[lq_sta
->lq
.sta_id
][tid
];
2281 if (tid_data
->agg
.state
== IWL_AGG_OFF
)
2289 * Select rate-scale / modulation-mode table to work with in
2290 * the rest of this function: "search" if searching for better
2291 * modulation mode, or "active" if doing rate scaling within a mode.
2293 if (!lq_sta
->search_better_tbl
)
2294 active_tbl
= lq_sta
->active_tbl
;
2296 active_tbl
= 1 - lq_sta
->active_tbl
;
2298 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2299 if (is_legacy(tbl
->lq_type
))
2300 lq_sta
->is_green
= 0;
2302 lq_sta
->is_green
= rs_use_green(sta
);
2303 is_green
= lq_sta
->is_green
;
2305 /* current tx rate */
2306 index
= lq_sta
->last_txrate_idx
;
2308 IWL_DEBUG_RATE(priv
, "Rate scale index %d for type %d\n", index
,
2311 /* rates available for this association, and for modulation mode */
2312 rate_mask
= rs_get_supported_rates(lq_sta
, hdr
, tbl
->lq_type
);
2314 IWL_DEBUG_RATE(priv
, "mask 0x%04X\n", rate_mask
);
2316 /* mask with station rate restriction */
2317 if (is_legacy(tbl
->lq_type
)) {
2318 if (lq_sta
->band
== IEEE80211_BAND_5GHZ
)
2319 /* supp_rates has no CCK bits in A mode */
2320 rate_scale_index_msk
= (u16
) (rate_mask
&
2321 (lq_sta
->supp_rates
<< IWL_FIRST_OFDM_RATE
));
2323 rate_scale_index_msk
= (u16
) (rate_mask
&
2324 lq_sta
->supp_rates
);
2327 rate_scale_index_msk
= rate_mask
;
2329 if (!rate_scale_index_msk
)
2330 rate_scale_index_msk
= rate_mask
;
2332 if (!((1 << index
) & rate_scale_index_msk
)) {
2333 IWL_ERR(priv
, "Current Rate is not valid\n");
2334 if (lq_sta
->search_better_tbl
) {
2335 /* revert to active table if search table is not valid*/
2336 tbl
->lq_type
= LQ_NONE
;
2337 lq_sta
->search_better_tbl
= 0;
2338 tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
2339 /* get "active" rate info */
2340 index
= iwl_hwrate_to_plcp_idx(tbl
->current_rate
);
2341 rs_update_rate_tbl(priv
, ctx
, lq_sta
, tbl
,
2347 /* Get expected throughput table and history window for current rate */
2348 if (!tbl
->expected_tpt
) {
2349 IWL_ERR(priv
, "tbl->expected_tpt is NULL\n");
2353 /* force user max rate if set by user */
2354 if ((lq_sta
->max_rate_idx
!= -1) &&
2355 (lq_sta
->max_rate_idx
< index
)) {
2356 index
= lq_sta
->max_rate_idx
;
2358 window
= &(tbl
->win
[index
]);
2362 window
= &(tbl
->win
[index
]);
2365 * If there is not enough history to calculate actual average
2366 * throughput, keep analyzing results of more tx frames, without
2367 * changing rate or mode (bypass most of the rest of this function).
2368 * Set up new rate table in uCode only if old rate is not supported
2369 * in current association (use new rate found above).
2371 fail_count
= window
->counter
- window
->success_counter
;
2372 if ((fail_count
< IWL_RATE_MIN_FAILURE_TH
) &&
2373 (window
->success_counter
< IWL_RATE_MIN_SUCCESS_TH
)) {
2374 IWL_DEBUG_RATE(priv
, "LQ: still below TH. succ=%d total=%d "
2376 window
->success_counter
, window
->counter
, index
);
2378 /* Can't calculate this yet; not enough history */
2379 window
->average_tpt
= IWL_INVALID_VALUE
;
2381 /* Should we stay with this modulation mode,
2382 * or search for a new one? */
2383 rs_stay_in_table(lq_sta
, false);
2387 /* Else we have enough samples; calculate estimate of
2388 * actual average throughput */
2389 if (window
->average_tpt
!= ((window
->success_ratio
*
2390 tbl
->expected_tpt
[index
] + 64) / 128)) {
2391 IWL_ERR(priv
, "expected_tpt should have been calculated by now\n");
2392 window
->average_tpt
= ((window
->success_ratio
*
2393 tbl
->expected_tpt
[index
] + 64) / 128);
2396 /* If we are searching for better modulation mode, check success. */
2397 if (lq_sta
->search_better_tbl
&&
2398 (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_MULTI
)) {
2399 /* If good success, continue using the "search" mode;
2400 * no need to send new link quality command, since we're
2401 * continuing to use the setup that we've been trying. */
2402 if (window
->average_tpt
> lq_sta
->last_tpt
) {
2404 IWL_DEBUG_RATE(priv
, "LQ: SWITCHING TO NEW TABLE "
2405 "suc=%d cur-tpt=%d old-tpt=%d\n",
2406 window
->success_ratio
,
2407 window
->average_tpt
,
2410 if (!is_legacy(tbl
->lq_type
))
2411 lq_sta
->enable_counter
= 1;
2413 /* Swap tables; "search" becomes "active" */
2414 lq_sta
->active_tbl
= active_tbl
;
2415 current_tpt
= window
->average_tpt
;
2417 /* Else poor success; go back to mode in "active" table */
2420 IWL_DEBUG_RATE(priv
, "LQ: GOING BACK TO THE OLD TABLE "
2421 "suc=%d cur-tpt=%d old-tpt=%d\n",
2422 window
->success_ratio
,
2423 window
->average_tpt
,
2426 /* Nullify "search" table */
2427 tbl
->lq_type
= LQ_NONE
;
2429 /* Revert to "active" table */
2430 active_tbl
= lq_sta
->active_tbl
;
2431 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2433 /* Revert to "active" rate and throughput info */
2434 index
= iwl_hwrate_to_plcp_idx(tbl
->current_rate
);
2435 current_tpt
= lq_sta
->last_tpt
;
2437 /* Need to set up a new rate table in uCode */
2441 /* Either way, we've made a decision; modulation mode
2442 * search is done, allow rate adjustment next time. */
2443 lq_sta
->search_better_tbl
= 0;
2444 done_search
= 1; /* Don't switch modes below! */
2448 /* (Else) not in search of better modulation mode, try for better
2449 * starting rate, while staying in this mode. */
2450 high_low
= rs_get_adjacent_rate(priv
, index
, rate_scale_index_msk
,
2452 low
= high_low
& 0xff;
2453 high
= (high_low
>> 8) & 0xff;
2455 /* If user set max rate, dont allow higher than user constrain */
2456 if ((lq_sta
->max_rate_idx
!= -1) &&
2457 (lq_sta
->max_rate_idx
< high
))
2458 high
= IWL_RATE_INVALID
;
2460 sr
= window
->success_ratio
;
2462 /* Collect measured throughputs for current and adjacent rates */
2463 current_tpt
= window
->average_tpt
;
2464 if (low
!= IWL_RATE_INVALID
)
2465 low_tpt
= tbl
->win
[low
].average_tpt
;
2466 if (high
!= IWL_RATE_INVALID
)
2467 high_tpt
= tbl
->win
[high
].average_tpt
;
2471 /* Too many failures, decrease rate */
2472 if ((sr
<= IWL_RATE_DECREASE_TH
) || (current_tpt
== 0)) {
2473 IWL_DEBUG_RATE(priv
, "decrease rate because of low success_ratio\n");
2476 /* No throughput measured yet for adjacent rates; try increase. */
2477 } else if ((low_tpt
== IWL_INVALID_VALUE
) &&
2478 (high_tpt
== IWL_INVALID_VALUE
)) {
2480 if (high
!= IWL_RATE_INVALID
&& sr
>= IWL_RATE_INCREASE_TH
)
2482 else if (low
!= IWL_RATE_INVALID
)
2486 /* Both adjacent throughputs are measured, but neither one has better
2487 * throughput; we're using the best rate, don't change it! */
2488 else if ((low_tpt
!= IWL_INVALID_VALUE
) &&
2489 (high_tpt
!= IWL_INVALID_VALUE
) &&
2490 (low_tpt
< current_tpt
) &&
2491 (high_tpt
< current_tpt
))
2494 /* At least one adjacent rate's throughput is measured,
2495 * and may have better performance. */
2497 /* Higher adjacent rate's throughput is measured */
2498 if (high_tpt
!= IWL_INVALID_VALUE
) {
2499 /* Higher rate has better throughput */
2500 if (high_tpt
> current_tpt
&&
2501 sr
>= IWL_RATE_INCREASE_TH
) {
2507 /* Lower adjacent rate's throughput is measured */
2508 } else if (low_tpt
!= IWL_INVALID_VALUE
) {
2509 /* Lower rate has better throughput */
2510 if (low_tpt
> current_tpt
) {
2511 IWL_DEBUG_RATE(priv
,
2512 "decrease rate because of low tpt\n");
2514 } else if (sr
>= IWL_RATE_INCREASE_TH
) {
2520 /* Sanity check; asked for decrease, but success rate or throughput
2521 * has been good at old rate. Don't change it. */
2522 if ((scale_action
== -1) && (low
!= IWL_RATE_INVALID
) &&
2523 ((sr
> IWL_RATE_HIGH_TH
) ||
2524 (current_tpt
> (100 * tbl
->expected_tpt
[low
]))))
2526 if (!iwl_ht_enabled(priv
) && !is_legacy(tbl
->lq_type
))
2528 if (iwl_tx_ant_restriction(priv
) != IWL_ANT_OK_MULTI
&&
2529 (is_mimo2(tbl
->lq_type
) || is_mimo3(tbl
->lq_type
)))
2532 if ((priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
) &&
2533 (is_mimo2(tbl
->lq_type
) || is_mimo3(tbl
->lq_type
))) {
2534 if (lq_sta
->last_bt_traffic
> priv
->bt_traffic_load
) {
2536 * don't set scale_action, don't want to scale up if
2537 * the rate scale doesn't otherwise think that is a
2540 } else if (lq_sta
->last_bt_traffic
<= priv
->bt_traffic_load
) {
2544 lq_sta
->last_bt_traffic
= priv
->bt_traffic_load
;
2546 if ((priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
) &&
2547 (is_mimo2(tbl
->lq_type
) || is_mimo3(tbl
->lq_type
))) {
2548 /* search for a new modulation */
2549 rs_stay_in_table(lq_sta
, true);
2553 switch (scale_action
) {
2555 /* Decrease starting rate, update uCode's rate table */
2556 if (low
!= IWL_RATE_INVALID
) {
2563 /* Increase starting rate, update uCode's rate table */
2564 if (high
!= IWL_RATE_INVALID
) {
2576 IWL_DEBUG_RATE(priv
, "choose rate scale index %d action %d low %d "
2577 "high %d type %d\n",
2578 index
, scale_action
, low
, high
, tbl
->lq_type
);
2581 /* Replace uCode's rate table for the destination station. */
2583 rs_update_rate_tbl(priv
, ctx
, lq_sta
, tbl
, index
, is_green
);
2585 if (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_MULTI
) {
2586 /* Should we stay with this modulation mode,
2587 * or search for a new one? */
2588 rs_stay_in_table(lq_sta
, false);
2591 * Search for new modulation mode if we're:
2592 * 1) Not changing rates right now
2593 * 2) Not just finishing up a search
2594 * 3) Allowing a new search
2596 if (!update_lq
&& !done_search
&& !lq_sta
->stay_in_tbl
&& window
->counter
) {
2597 /* Save current throughput to compare with "search" throughput*/
2598 lq_sta
->last_tpt
= current_tpt
;
2600 /* Select a new "search" modulation mode to try.
2601 * If one is found, set up the new "search" table. */
2602 if (is_legacy(tbl
->lq_type
))
2603 rs_move_legacy_other(priv
, lq_sta
, conf
, sta
, index
);
2604 else if (is_siso(tbl
->lq_type
))
2605 rs_move_siso_to_other(priv
, lq_sta
, conf
, sta
, index
);
2606 else if (is_mimo2(tbl
->lq_type
))
2607 rs_move_mimo2_to_other(priv
, lq_sta
, conf
, sta
, index
);
2609 rs_move_mimo3_to_other(priv
, lq_sta
, conf
, sta
, index
);
2611 /* If new "search" mode was selected, set up in uCode table */
2612 if (lq_sta
->search_better_tbl
) {
2613 /* Access the "search" table, clear its history. */
2614 tbl
= &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
2615 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2616 rs_rate_scale_clear_window(&(tbl
->win
[i
]));
2618 /* Use new "search" start rate */
2619 index
= iwl_hwrate_to_plcp_idx(tbl
->current_rate
);
2621 IWL_DEBUG_RATE(priv
, "Switch current mcs: %X index: %d\n",
2622 tbl
->current_rate
, index
);
2623 rs_fill_link_cmd(priv
, lq_sta
, tbl
->current_rate
);
2624 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
2629 if (done_search
&& !lq_sta
->stay_in_tbl
) {
2630 /* If the "active" (non-search) mode was legacy,
2631 * and we've tried switching antennas,
2632 * but we haven't been able to try HT modes (not available),
2633 * stay with best antenna legacy modulation for a while
2634 * before next round of mode comparisons. */
2635 tbl1
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
2636 if (is_legacy(tbl1
->lq_type
) && !conf_is_ht(conf
) &&
2637 lq_sta
->action_counter
> tbl1
->max_search
) {
2638 IWL_DEBUG_RATE(priv
, "LQ: STAY in legacy table\n");
2639 rs_set_stay_in_table(priv
, 1, lq_sta
);
2642 /* If we're in an HT mode, and all 3 mode switch actions
2643 * have been tried and compared, stay in this best modulation
2644 * mode for a while before next round of mode comparisons. */
2645 if (lq_sta
->enable_counter
&&
2646 (lq_sta
->action_counter
>= tbl1
->max_search
) &&
2647 iwl_ht_enabled(priv
)) {
2648 if ((lq_sta
->last_tpt
> IWL_AGG_TPT_THREHOLD
) &&
2649 (lq_sta
->tx_agg_tid_en
& (1 << tid
)) &&
2650 (tid
!= IWL_MAX_TID_COUNT
)) {
2651 u8 sta_id
= lq_sta
->lq
.sta_id
;
2653 &priv
->shrd
->tid_data
[sta_id
][tid
];
2654 if (tid_data
->agg
.state
== IWL_AGG_OFF
) {
2655 IWL_DEBUG_RATE(priv
,
2656 "try to aggregate tid %d\n",
2658 rs_tl_turn_on_agg(priv
, tid
,
2662 rs_set_stay_in_table(priv
, 0, lq_sta
);
2667 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, index
, is_green
);
2668 lq_sta
->last_txrate_idx
= index
;
2672 * rs_initialize_lq - Initialize a station's hardware rate table
2674 * The uCode's station table contains a table of fallback rates
2675 * for automatic fallback during transmission.
2677 * NOTE: This sets up a default set of values. These will be replaced later
2678 * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
2681 * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
2682 * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
2683 * which requires station table entry to exist).
2685 static void rs_initialize_lq(struct iwl_priv
*priv
,
2686 struct ieee80211_conf
*conf
,
2687 struct ieee80211_sta
*sta
,
2688 struct iwl_lq_sta
*lq_sta
)
2690 struct iwl_scale_tbl_info
*tbl
;
2694 u8 use_green
= rs_use_green(sta
);
2697 struct iwl_station_priv
*sta_priv
;
2698 struct iwl_rxon_context
*ctx
;
2700 if (!sta
|| !lq_sta
)
2703 sta_priv
= (void *)sta
->drv_priv
;
2704 ctx
= sta_priv
->ctx
;
2706 i
= lq_sta
->last_txrate_idx
;
2708 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
2710 if (!lq_sta
->search_better_tbl
)
2711 active_tbl
= lq_sta
->active_tbl
;
2713 active_tbl
= 1 - lq_sta
->active_tbl
;
2715 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2717 if ((i
< 0) || (i
>= IWL_RATE_COUNT
))
2720 rate
= iwl_rates
[i
].plcp
;
2721 tbl
->ant_type
= first_antenna(valid_tx_ant
);
2722 rate
|= tbl
->ant_type
<< RATE_MCS_ANT_POS
;
2724 if (i
>= IWL_FIRST_CCK_RATE
&& i
<= IWL_LAST_CCK_RATE
)
2725 rate
|= RATE_MCS_CCK_MSK
;
2727 rs_get_tbl_info_from_mcs(rate
, priv
->band
, tbl
, &rate_idx
);
2728 if (!rs_is_valid_ant(valid_tx_ant
, tbl
->ant_type
))
2729 rs_toggle_antenna(valid_tx_ant
, &rate
, tbl
);
2731 rate
= rate_n_flags_from_tbl(priv
, tbl
, rate_idx
, use_green
);
2732 tbl
->current_rate
= rate
;
2733 rs_set_expected_tpt_table(lq_sta
, tbl
);
2734 rs_fill_link_cmd(NULL
, lq_sta
, rate
);
2735 priv
->stations
[lq_sta
->lq
.sta_id
].lq
= &lq_sta
->lq
;
2736 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_SYNC
, true);
2739 static void rs_get_rate(void *priv_r
, struct ieee80211_sta
*sta
, void *priv_sta
,
2740 struct ieee80211_tx_rate_control
*txrc
)
2743 struct sk_buff
*skb
= txrc
->skb
;
2744 struct ieee80211_supported_band
*sband
= txrc
->sband
;
2745 struct iwl_priv
*priv __maybe_unused
= (struct iwl_priv
*)priv_r
;
2746 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2747 struct iwl_lq_sta
*lq_sta
= priv_sta
;
2750 IWL_DEBUG_RATE_LIMIT(priv
, "rate scale calculate new rate for skb\n");
2752 /* Get max rate if user set max rate */
2754 lq_sta
->max_rate_idx
= txrc
->max_rate_idx
;
2755 if ((sband
->band
== IEEE80211_BAND_5GHZ
) &&
2756 (lq_sta
->max_rate_idx
!= -1))
2757 lq_sta
->max_rate_idx
+= IWL_FIRST_OFDM_RATE
;
2758 if ((lq_sta
->max_rate_idx
< 0) ||
2759 (lq_sta
->max_rate_idx
>= IWL_RATE_COUNT
))
2760 lq_sta
->max_rate_idx
= -1;
2763 /* Treat uninitialized rate scaling data same as non-existing. */
2764 if (lq_sta
&& !lq_sta
->drv
) {
2765 IWL_DEBUG_RATE(priv
, "Rate scaling not initialized yet.\n");
2769 /* Send management frames and NO_ACK data using lowest rate. */
2770 if (rate_control_send_low(sta
, priv_sta
, txrc
))
2773 rate_idx
= lq_sta
->last_txrate_idx
;
2775 if (lq_sta
->last_rate_n_flags
& RATE_MCS_HT_MSK
) {
2776 rate_idx
-= IWL_FIRST_OFDM_RATE
;
2777 /* 6M and 9M shared same MCS index */
2778 rate_idx
= (rate_idx
> 0) ? (rate_idx
- 1) : 0;
2779 if (rs_extract_rate(lq_sta
->last_rate_n_flags
) >=
2780 IWL_RATE_MIMO3_6M_PLCP
)
2781 rate_idx
= rate_idx
+ (2 * MCS_INDEX_PER_STREAM
);
2782 else if (rs_extract_rate(lq_sta
->last_rate_n_flags
) >=
2783 IWL_RATE_MIMO2_6M_PLCP
)
2784 rate_idx
= rate_idx
+ MCS_INDEX_PER_STREAM
;
2785 info
->control
.rates
[0].flags
= IEEE80211_TX_RC_MCS
;
2786 if (lq_sta
->last_rate_n_flags
& RATE_MCS_SGI_MSK
)
2787 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_SHORT_GI
;
2788 if (lq_sta
->last_rate_n_flags
& RATE_MCS_DUP_MSK
)
2789 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_DUP_DATA
;
2790 if (lq_sta
->last_rate_n_flags
& RATE_MCS_HT40_MSK
)
2791 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_40_MHZ_WIDTH
;
2792 if (lq_sta
->last_rate_n_flags
& RATE_MCS_GF_MSK
)
2793 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_GREEN_FIELD
;
2795 /* Check for invalid rates */
2796 if ((rate_idx
< 0) || (rate_idx
>= IWL_RATE_COUNT_LEGACY
) ||
2797 ((sband
->band
== IEEE80211_BAND_5GHZ
) &&
2798 (rate_idx
< IWL_FIRST_OFDM_RATE
)))
2799 rate_idx
= rate_lowest_index(sband
, sta
);
2800 /* On valid 5 GHz rate, adjust index */
2801 else if (sband
->band
== IEEE80211_BAND_5GHZ
)
2802 rate_idx
-= IWL_FIRST_OFDM_RATE
;
2803 info
->control
.rates
[0].flags
= 0;
2805 info
->control
.rates
[0].idx
= rate_idx
;
2809 static void *rs_alloc_sta(void *priv_rate
, struct ieee80211_sta
*sta
,
2812 struct iwl_station_priv
*sta_priv
= (struct iwl_station_priv
*) sta
->drv_priv
;
2813 struct iwl_priv
*priv
;
2815 priv
= (struct iwl_priv
*)priv_rate
;
2816 IWL_DEBUG_RATE(priv
, "create station rate scale window\n");
2818 return &sta_priv
->lq_sta
;
2822 * Called after adding a new station to initialize rate scaling
2824 void iwl_rs_rate_init(struct iwl_priv
*priv
, struct ieee80211_sta
*sta
, u8 sta_id
)
2827 struct ieee80211_hw
*hw
= priv
->hw
;
2828 struct ieee80211_conf
*conf
= &priv
->hw
->conf
;
2829 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
2830 struct iwl_station_priv
*sta_priv
;
2831 struct iwl_lq_sta
*lq_sta
;
2832 struct ieee80211_supported_band
*sband
;
2834 sta_priv
= (struct iwl_station_priv
*) sta
->drv_priv
;
2835 lq_sta
= &sta_priv
->lq_sta
;
2836 sband
= hw
->wiphy
->bands
[conf
->channel
->band
];
2839 lq_sta
->lq
.sta_id
= sta_id
;
2841 for (j
= 0; j
< LQ_SIZE
; j
++)
2842 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2843 rs_rate_scale_clear_window(&lq_sta
->lq_info
[j
].win
[i
]);
2845 lq_sta
->flush_timer
= 0;
2846 lq_sta
->supp_rates
= sta
->supp_rates
[sband
->band
];
2847 for (j
= 0; j
< LQ_SIZE
; j
++)
2848 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2849 rs_rate_scale_clear_window(&lq_sta
->lq_info
[j
].win
[i
]);
2851 IWL_DEBUG_RATE(priv
, "LQ: *** rate scale station global init for station %d ***\n",
2853 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2854 * the lowest or the highest rate.. Could consider using RSSI from
2855 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2859 lq_sta
->max_rate_idx
= -1;
2860 lq_sta
->missed_rate_counter
= IWL_MISSED_RATE_MAX
;
2861 lq_sta
->is_green
= rs_use_green(sta
);
2862 lq_sta
->active_legacy_rate
= priv
->active_rate
& ~(0x1000);
2863 lq_sta
->band
= priv
->band
;
2865 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2866 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2868 lq_sta
->active_siso_rate
= ht_cap
->mcs
.rx_mask
[0] << 1;
2869 lq_sta
->active_siso_rate
|= ht_cap
->mcs
.rx_mask
[0] & 0x1;
2870 lq_sta
->active_siso_rate
&= ~((u16
)0x2);
2871 lq_sta
->active_siso_rate
<<= IWL_FIRST_OFDM_RATE
;
2874 lq_sta
->active_mimo2_rate
= ht_cap
->mcs
.rx_mask
[1] << 1;
2875 lq_sta
->active_mimo2_rate
|= ht_cap
->mcs
.rx_mask
[1] & 0x1;
2876 lq_sta
->active_mimo2_rate
&= ~((u16
)0x2);
2877 lq_sta
->active_mimo2_rate
<<= IWL_FIRST_OFDM_RATE
;
2879 lq_sta
->active_mimo3_rate
= ht_cap
->mcs
.rx_mask
[2] << 1;
2880 lq_sta
->active_mimo3_rate
|= ht_cap
->mcs
.rx_mask
[2] & 0x1;
2881 lq_sta
->active_mimo3_rate
&= ~((u16
)0x2);
2882 lq_sta
->active_mimo3_rate
<<= IWL_FIRST_OFDM_RATE
;
2884 IWL_DEBUG_RATE(priv
, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
2885 lq_sta
->active_siso_rate
,
2886 lq_sta
->active_mimo2_rate
,
2887 lq_sta
->active_mimo3_rate
);
2889 /* These values will be overridden later */
2890 lq_sta
->lq
.general_params
.single_stream_ant_msk
=
2891 first_antenna(hw_params(priv
).valid_tx_ant
);
2892 lq_sta
->lq
.general_params
.dual_stream_ant_msk
=
2893 hw_params(priv
).valid_tx_ant
&
2894 ~first_antenna(hw_params(priv
).valid_tx_ant
);
2895 if (!lq_sta
->lq
.general_params
.dual_stream_ant_msk
) {
2896 lq_sta
->lq
.general_params
.dual_stream_ant_msk
= ANT_AB
;
2897 } else if (num_of_ant(hw_params(priv
).valid_tx_ant
) == 2) {
2898 lq_sta
->lq
.general_params
.dual_stream_ant_msk
=
2899 hw_params(priv
).valid_tx_ant
;
2902 /* as default allow aggregation for all tids */
2903 lq_sta
->tx_agg_tid_en
= IWL_AGG_ALL_TID
;
2906 /* Set last_txrate_idx to lowest rate */
2907 lq_sta
->last_txrate_idx
= rate_lowest_index(sband
, sta
);
2908 if (sband
->band
== IEEE80211_BAND_5GHZ
)
2909 lq_sta
->last_txrate_idx
+= IWL_FIRST_OFDM_RATE
;
2911 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
2912 priv
->tm_fixed_rate
= 0;
2914 #ifdef CONFIG_MAC80211_DEBUGFS
2915 lq_sta
->dbg_fixed_rate
= 0;
2918 rs_initialize_lq(priv
, conf
, sta
, lq_sta
);
2921 static void rs_fill_link_cmd(struct iwl_priv
*priv
,
2922 struct iwl_lq_sta
*lq_sta
, u32 new_rate
)
2924 struct iwl_scale_tbl_info tbl_type
;
2927 int repeat_rate
= 0;
2928 u8 ant_toggle_cnt
= 0;
2929 u8 use_ht_possible
= 1;
2930 u8 valid_tx_ant
= 0;
2931 struct iwl_station_priv
*sta_priv
=
2932 container_of(lq_sta
, struct iwl_station_priv
, lq_sta
);
2933 struct iwl_link_quality_cmd
*lq_cmd
= &lq_sta
->lq
;
2935 /* Override starting rate (index 0) if needed for debug purposes */
2936 rs_dbgfs_set_mcs(lq_sta
, &new_rate
, index
);
2938 /* Interpret new_rate (rate_n_flags) */
2939 rs_get_tbl_info_from_mcs(new_rate
, lq_sta
->band
,
2940 &tbl_type
, &rate_idx
);
2942 if (priv
&& priv
->bt_full_concurrent
) {
2945 first_antenna(hw_params(priv
).valid_tx_ant
);
2948 /* How many times should we repeat the initial rate? */
2949 if (is_legacy(tbl_type
.lq_type
)) {
2951 repeat_rate
= IWL_NUMBER_TRY
;
2953 repeat_rate
= min(IWL_HT_NUMBER_TRY
,
2954 LINK_QUAL_AGG_DISABLE_START_DEF
- 1);
2957 lq_cmd
->general_params
.mimo_delimiter
=
2958 is_mimo(tbl_type
.lq_type
) ? 1 : 0;
2960 /* Fill 1st table entry (index 0) */
2961 lq_cmd
->rs_table
[index
].rate_n_flags
= cpu_to_le32(new_rate
);
2963 if (num_of_ant(tbl_type
.ant_type
) == 1) {
2964 lq_cmd
->general_params
.single_stream_ant_msk
=
2966 } else if (num_of_ant(tbl_type
.ant_type
) == 2) {
2967 lq_cmd
->general_params
.dual_stream_ant_msk
=
2969 } /* otherwise we don't modify the existing value */
2974 if (priv
->bt_full_concurrent
)
2975 valid_tx_ant
= ANT_A
;
2977 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
2980 /* Fill rest of rate table */
2981 while (index
< LINK_QUAL_MAX_RETRY_NUM
) {
2982 /* Repeat initial/next rate.
2983 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
2984 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
2985 while (repeat_rate
> 0 && (index
< LINK_QUAL_MAX_RETRY_NUM
)) {
2986 if (is_legacy(tbl_type
.lq_type
)) {
2987 if (ant_toggle_cnt
< NUM_TRY_BEFORE_ANT_TOGGLE
)
2990 rs_toggle_antenna(valid_tx_ant
,
2991 &new_rate
, &tbl_type
))
2995 /* Override next rate if needed for debug purposes */
2996 rs_dbgfs_set_mcs(lq_sta
, &new_rate
, index
);
2998 /* Fill next table entry */
2999 lq_cmd
->rs_table
[index
].rate_n_flags
=
3000 cpu_to_le32(new_rate
);
3005 rs_get_tbl_info_from_mcs(new_rate
, lq_sta
->band
, &tbl_type
,
3008 if (priv
&& priv
->bt_full_concurrent
) {
3011 first_antenna(hw_params(priv
).valid_tx_ant
);
3014 /* Indicate to uCode which entries might be MIMO.
3015 * If initial rate was MIMO, this will finally end up
3016 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
3017 if (is_mimo(tbl_type
.lq_type
))
3018 lq_cmd
->general_params
.mimo_delimiter
= index
;
3021 new_rate
= rs_get_lower_rate(lq_sta
, &tbl_type
, rate_idx
,
3024 /* How many times should we repeat the next rate? */
3025 if (is_legacy(tbl_type
.lq_type
)) {
3026 if (ant_toggle_cnt
< NUM_TRY_BEFORE_ANT_TOGGLE
)
3029 rs_toggle_antenna(valid_tx_ant
,
3030 &new_rate
, &tbl_type
))
3033 repeat_rate
= IWL_NUMBER_TRY
;
3035 repeat_rate
= IWL_HT_NUMBER_TRY
;
3038 /* Don't allow HT rates after next pass.
3039 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
3040 use_ht_possible
= 0;
3042 /* Override next rate if needed for debug purposes */
3043 rs_dbgfs_set_mcs(lq_sta
, &new_rate
, index
);
3045 /* Fill next table entry */
3046 lq_cmd
->rs_table
[index
].rate_n_flags
= cpu_to_le32(new_rate
);
3052 lq_cmd
->agg_params
.agg_frame_cnt_limit
=
3053 sta_priv
->max_agg_bufsize
?: LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
3054 lq_cmd
->agg_params
.agg_dis_start_th
= LINK_QUAL_AGG_DISABLE_START_DEF
;
3056 lq_cmd
->agg_params
.agg_time_limit
=
3057 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF
);
3059 * overwrite if needed, pass aggregation time limit
3062 if (priv
&& priv
->cfg
->bt_params
&&
3063 priv
->cfg
->bt_params
->agg_time_limit
&&
3064 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)
3065 lq_cmd
->agg_params
.agg_time_limit
=
3066 cpu_to_le16(priv
->cfg
->bt_params
->agg_time_limit
);
3069 static void *rs_alloc(struct ieee80211_hw
*hw
, struct dentry
*debugfsdir
)
3073 /* rate scale requires free function to be implemented */
3074 static void rs_free(void *priv_rate
)
3079 static void rs_free_sta(void *priv_r
, struct ieee80211_sta
*sta
,
3082 struct iwl_priv
*priv __maybe_unused
= priv_r
;
3084 IWL_DEBUG_RATE(priv
, "enter\n");
3085 IWL_DEBUG_RATE(priv
, "leave\n");
3088 #ifdef CONFIG_MAC80211_DEBUGFS
3089 static int open_file_generic(struct inode
*inode
, struct file
*file
)
3091 file
->private_data
= inode
->i_private
;
3094 static void rs_dbgfs_set_mcs(struct iwl_lq_sta
*lq_sta
,
3095 u32
*rate_n_flags
, int index
)
3097 struct iwl_priv
*priv
;
3102 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
3103 if (lq_sta
->dbg_fixed_rate
) {
3105 ((lq_sta
->dbg_fixed_rate
& RATE_MCS_ANT_ABC_MSK
)
3106 >> RATE_MCS_ANT_POS
);
3107 if ((valid_tx_ant
& ant_sel_tx
) == ant_sel_tx
) {
3108 *rate_n_flags
= lq_sta
->dbg_fixed_rate
;
3109 IWL_DEBUG_RATE(priv
, "Fixed rate ON\n");
3111 lq_sta
->dbg_fixed_rate
= 0;
3113 "Invalid antenna selection 0x%X, Valid is 0x%X\n",
3114 ant_sel_tx
, valid_tx_ant
);
3115 IWL_DEBUG_RATE(priv
, "Fixed rate OFF\n");
3118 IWL_DEBUG_RATE(priv
, "Fixed rate OFF\n");
3122 static ssize_t
rs_sta_dbgfs_scale_table_write(struct file
*file
,
3123 const char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3125 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3126 struct iwl_priv
*priv
;
3133 memset(buf
, 0, sizeof(buf
));
3134 buf_size
= min(count
, sizeof(buf
) - 1);
3135 if (copy_from_user(buf
, user_buf
, buf_size
))
3138 if (sscanf(buf
, "%x", &parsed_rate
) == 1)
3139 lq_sta
->dbg_fixed_rate
= parsed_rate
;
3141 lq_sta
->dbg_fixed_rate
= 0;
3143 rs_program_fix_rate(priv
, lq_sta
);
3148 static ssize_t
rs_sta_dbgfs_scale_table_read(struct file
*file
,
3149 char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3157 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3158 struct iwl_priv
*priv
;
3159 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
3162 buff
= kmalloc(1024, GFP_KERNEL
);
3166 desc
+= sprintf(buff
+desc
, "sta_id %d\n", lq_sta
->lq
.sta_id
);
3167 desc
+= sprintf(buff
+desc
, "failed=%d success=%d rate=0%X\n",
3168 lq_sta
->total_failed
, lq_sta
->total_success
,
3169 lq_sta
->active_legacy_rate
);
3170 desc
+= sprintf(buff
+desc
, "fixed rate 0x%X\n",
3171 lq_sta
->dbg_fixed_rate
);
3172 desc
+= sprintf(buff
+desc
, "valid_tx_ant %s%s%s\n",
3173 (hw_params(priv
).valid_tx_ant
& ANT_A
) ? "ANT_A," : "",
3174 (hw_params(priv
).valid_tx_ant
& ANT_B
) ? "ANT_B," : "",
3175 (hw_params(priv
).valid_tx_ant
& ANT_C
) ? "ANT_C" : "");
3176 desc
+= sprintf(buff
+desc
, "lq type %s\n",
3177 (is_legacy(tbl
->lq_type
)) ? "legacy" : "HT");
3178 if (is_Ht(tbl
->lq_type
)) {
3179 desc
+= sprintf(buff
+desc
, " %s",
3180 (is_siso(tbl
->lq_type
)) ? "SISO" :
3181 ((is_mimo2(tbl
->lq_type
)) ? "MIMO2" : "MIMO3"));
3182 desc
+= sprintf(buff
+desc
, " %s",
3183 (tbl
->is_ht40
) ? "40MHz" : "20MHz");
3184 desc
+= sprintf(buff
+desc
, " %s %s %s\n", (tbl
->is_SGI
) ? "SGI" : "",
3185 (lq_sta
->is_green
) ? "GF enabled" : "",
3186 (lq_sta
->is_agg
) ? "AGG on" : "");
3188 desc
+= sprintf(buff
+desc
, "last tx rate=0x%X\n",
3189 lq_sta
->last_rate_n_flags
);
3190 desc
+= sprintf(buff
+desc
, "general:"
3191 "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
3192 lq_sta
->lq
.general_params
.flags
,
3193 lq_sta
->lq
.general_params
.mimo_delimiter
,
3194 lq_sta
->lq
.general_params
.single_stream_ant_msk
,
3195 lq_sta
->lq
.general_params
.dual_stream_ant_msk
);
3197 desc
+= sprintf(buff
+desc
, "agg:"
3198 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
3199 le16_to_cpu(lq_sta
->lq
.agg_params
.agg_time_limit
),
3200 lq_sta
->lq
.agg_params
.agg_dis_start_th
,
3201 lq_sta
->lq
.agg_params
.agg_frame_cnt_limit
);
3203 desc
+= sprintf(buff
+desc
,
3204 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
3205 lq_sta
->lq
.general_params
.start_rate_index
[0],
3206 lq_sta
->lq
.general_params
.start_rate_index
[1],
3207 lq_sta
->lq
.general_params
.start_rate_index
[2],
3208 lq_sta
->lq
.general_params
.start_rate_index
[3]);
3210 for (i
= 0; i
< LINK_QUAL_MAX_RETRY_NUM
; i
++) {
3211 index
= iwl_hwrate_to_plcp_idx(
3212 le32_to_cpu(lq_sta
->lq
.rs_table
[i
].rate_n_flags
));
3213 if (is_legacy(tbl
->lq_type
)) {
3214 desc
+= sprintf(buff
+desc
, " rate[%d] 0x%X %smbps\n",
3215 i
, le32_to_cpu(lq_sta
->lq
.rs_table
[i
].rate_n_flags
),
3216 iwl_rate_mcs
[index
].mbps
);
3218 desc
+= sprintf(buff
+desc
, " rate[%d] 0x%X %smbps (%s)\n",
3219 i
, le32_to_cpu(lq_sta
->lq
.rs_table
[i
].rate_n_flags
),
3220 iwl_rate_mcs
[index
].mbps
, iwl_rate_mcs
[index
].mcs
);
3224 ret
= simple_read_from_buffer(user_buf
, count
, ppos
, buff
, desc
);
3229 static const struct file_operations rs_sta_dbgfs_scale_table_ops
= {
3230 .write
= rs_sta_dbgfs_scale_table_write
,
3231 .read
= rs_sta_dbgfs_scale_table_read
,
3232 .open
= open_file_generic
,
3233 .llseek
= default_llseek
,
3235 static ssize_t
rs_sta_dbgfs_stats_table_read(struct file
*file
,
3236 char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3243 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3245 buff
= kmalloc(1024, GFP_KERNEL
);
3249 for (i
= 0; i
< LQ_SIZE
; i
++) {
3250 desc
+= sprintf(buff
+desc
,
3251 "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
3253 lq_sta
->active_tbl
== i
? "*" : "x",
3254 lq_sta
->lq_info
[i
].lq_type
,
3255 lq_sta
->lq_info
[i
].is_SGI
,
3256 lq_sta
->lq_info
[i
].is_ht40
,
3257 lq_sta
->lq_info
[i
].is_dup
,
3259 lq_sta
->lq_info
[i
].current_rate
);
3260 for (j
= 0; j
< IWL_RATE_COUNT
; j
++) {
3261 desc
+= sprintf(buff
+desc
,
3262 "counter=%d success=%d %%=%d\n",
3263 lq_sta
->lq_info
[i
].win
[j
].counter
,
3264 lq_sta
->lq_info
[i
].win
[j
].success_counter
,
3265 lq_sta
->lq_info
[i
].win
[j
].success_ratio
);
3268 ret
= simple_read_from_buffer(user_buf
, count
, ppos
, buff
, desc
);
3273 static const struct file_operations rs_sta_dbgfs_stats_table_ops
= {
3274 .read
= rs_sta_dbgfs_stats_table_read
,
3275 .open
= open_file_generic
,
3276 .llseek
= default_llseek
,
3279 static ssize_t
rs_sta_dbgfs_rate_scale_data_read(struct file
*file
,
3280 char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3282 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3283 struct iwl_scale_tbl_info
*tbl
= &lq_sta
->lq_info
[lq_sta
->active_tbl
];
3287 if (is_Ht(tbl
->lq_type
))
3288 desc
+= sprintf(buff
+desc
,
3289 "Bit Rate= %d Mb/s\n",
3290 tbl
->expected_tpt
[lq_sta
->last_txrate_idx
]);
3292 desc
+= sprintf(buff
+desc
,
3293 "Bit Rate= %d Mb/s\n",
3294 iwl_rates
[lq_sta
->last_txrate_idx
].ieee
>> 1);
3296 return simple_read_from_buffer(user_buf
, count
, ppos
, buff
, desc
);
3299 static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops
= {
3300 .read
= rs_sta_dbgfs_rate_scale_data_read
,
3301 .open
= open_file_generic
,
3302 .llseek
= default_llseek
,
3305 static void rs_add_debugfs(void *priv
, void *priv_sta
,
3308 struct iwl_lq_sta
*lq_sta
= priv_sta
;
3309 lq_sta
->rs_sta_dbgfs_scale_table_file
=
3310 debugfs_create_file("rate_scale_table", S_IRUSR
| S_IWUSR
, dir
,
3311 lq_sta
, &rs_sta_dbgfs_scale_table_ops
);
3312 lq_sta
->rs_sta_dbgfs_stats_table_file
=
3313 debugfs_create_file("rate_stats_table", S_IRUSR
, dir
,
3314 lq_sta
, &rs_sta_dbgfs_stats_table_ops
);
3315 lq_sta
->rs_sta_dbgfs_rate_scale_data_file
=
3316 debugfs_create_file("rate_scale_data", S_IRUSR
, dir
,
3317 lq_sta
, &rs_sta_dbgfs_rate_scale_data_ops
);
3318 lq_sta
->rs_sta_dbgfs_tx_agg_tid_en_file
=
3319 debugfs_create_u8("tx_agg_tid_enable", S_IRUSR
| S_IWUSR
, dir
,
3320 &lq_sta
->tx_agg_tid_en
);
3324 static void rs_remove_debugfs(void *priv
, void *priv_sta
)
3326 struct iwl_lq_sta
*lq_sta
= priv_sta
;
3327 debugfs_remove(lq_sta
->rs_sta_dbgfs_scale_table_file
);
3328 debugfs_remove(lq_sta
->rs_sta_dbgfs_stats_table_file
);
3329 debugfs_remove(lq_sta
->rs_sta_dbgfs_rate_scale_data_file
);
3330 debugfs_remove(lq_sta
->rs_sta_dbgfs_tx_agg_tid_en_file
);
3335 * Initialization of rate scaling information is done by driver after
3336 * the station is added. Since mac80211 calls this function before a
3337 * station is added we ignore it.
3339 static void rs_rate_init_stub(void *priv_r
, struct ieee80211_supported_band
*sband
,
3340 struct ieee80211_sta
*sta
, void *priv_sta
)
3343 static struct rate_control_ops rs_ops
= {
3346 .tx_status
= rs_tx_status
,
3347 .get_rate
= rs_get_rate
,
3348 .rate_init
= rs_rate_init_stub
,
3351 .alloc_sta
= rs_alloc_sta
,
3352 .free_sta
= rs_free_sta
,
3353 #ifdef CONFIG_MAC80211_DEBUGFS
3354 .add_sta_debugfs
= rs_add_debugfs
,
3355 .remove_sta_debugfs
= rs_remove_debugfs
,
3359 int iwlagn_rate_control_register(void)
3361 return ieee80211_rate_control_register(&rs_ops
);
3364 void iwlagn_rate_control_unregister(void)
3366 ieee80211_rate_control_unregister(&rs_ops
);