MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
[linux-2.6/linux-mips.git] / drivers / scsi / libfc / fc_rport.c
blob760db7619446f6bc86fedfcd1a7511c62c262057
1 /*
2 * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 * Maintained at www.Open-FCoE.org
21 * RPORT GENERAL INFO
23 * This file contains all processing regarding fc_rports. It contains the
24 * rport state machine and does all rport interaction with the transport class.
25 * There should be no other places in libfc that interact directly with the
26 * transport class in regards to adding and deleting rports.
28 * fc_rport's represent N_Port's within the fabric.
32 * RPORT LOCKING
34 * The rport should never hold the rport mutex and then attempt to acquire
35 * either the lport or disc mutexes. The rport's mutex is considered lesser
36 * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
37 * more comments on the hierarchy.
39 * The locking strategy is similar to the lport's strategy. The lock protects
40 * the rport's states and is held and released by the entry points to the rport
41 * block. All _enter_* functions correspond to rport states and expect the rport
42 * mutex to be locked before calling them. This means that rports only handle
43 * one request or response at a time, since they're not critical for the I/O
44 * path this potential over-use of the mutex is acceptable.
47 #include <linux/kernel.h>
48 #include <linux/spinlock.h>
49 #include <linux/interrupt.h>
50 #include <linux/slab.h>
51 #include <linux/rcupdate.h>
52 #include <linux/timer.h>
53 #include <linux/workqueue.h>
54 #include <asm/unaligned.h>
56 #include <scsi/libfc.h>
57 #include <scsi/fc_encode.h>
59 #include "fc_libfc.h"
61 static struct workqueue_struct *rport_event_queue;
63 static void fc_rport_enter_flogi(struct fc_rport_priv *);
64 static void fc_rport_enter_plogi(struct fc_rport_priv *);
65 static void fc_rport_enter_prli(struct fc_rport_priv *);
66 static void fc_rport_enter_rtv(struct fc_rport_priv *);
67 static void fc_rport_enter_ready(struct fc_rport_priv *);
68 static void fc_rport_enter_logo(struct fc_rport_priv *);
69 static void fc_rport_enter_adisc(struct fc_rport_priv *);
71 static void fc_rport_recv_plogi_req(struct fc_lport *, struct fc_frame *);
72 static void fc_rport_recv_prli_req(struct fc_rport_priv *, struct fc_frame *);
73 static void fc_rport_recv_prlo_req(struct fc_rport_priv *, struct fc_frame *);
74 static void fc_rport_recv_logo_req(struct fc_lport *, struct fc_frame *);
75 static void fc_rport_timeout(struct work_struct *);
76 static void fc_rport_error(struct fc_rport_priv *, struct fc_frame *);
77 static void fc_rport_error_retry(struct fc_rport_priv *, struct fc_frame *);
78 static void fc_rport_work(struct work_struct *);
80 static const char *fc_rport_state_names[] = {
81 [RPORT_ST_INIT] = "Init",
82 [RPORT_ST_FLOGI] = "FLOGI",
83 [RPORT_ST_PLOGI_WAIT] = "PLOGI_WAIT",
84 [RPORT_ST_PLOGI] = "PLOGI",
85 [RPORT_ST_PRLI] = "PRLI",
86 [RPORT_ST_RTV] = "RTV",
87 [RPORT_ST_READY] = "Ready",
88 [RPORT_ST_ADISC] = "ADISC",
89 [RPORT_ST_DELETE] = "Delete",
92 /**
93 * fc_rport_lookup() - Lookup a remote port by port_id
94 * @lport: The local port to lookup the remote port on
95 * @port_id: The remote port ID to look up
97 * The caller must hold either disc_mutex or rcu_read_lock().
99 static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
100 u32 port_id)
102 struct fc_rport_priv *rdata;
104 list_for_each_entry_rcu(rdata, &lport->disc.rports, peers)
105 if (rdata->ids.port_id == port_id)
106 return rdata;
107 return NULL;
111 * fc_rport_create() - Create a new remote port
112 * @lport: The local port this remote port will be associated with
113 * @ids: The identifiers for the new remote port
115 * The remote port will start in the INIT state.
117 * Locking note: must be called with the disc_mutex held.
119 static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport,
120 u32 port_id)
122 struct fc_rport_priv *rdata;
124 rdata = lport->tt.rport_lookup(lport, port_id);
125 if (rdata)
126 return rdata;
128 rdata = kzalloc(sizeof(*rdata) + lport->rport_priv_size, GFP_KERNEL);
129 if (!rdata)
130 return NULL;
132 rdata->ids.node_name = -1;
133 rdata->ids.port_name = -1;
134 rdata->ids.port_id = port_id;
135 rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
137 kref_init(&rdata->kref);
138 mutex_init(&rdata->rp_mutex);
139 rdata->local_port = lport;
140 rdata->rp_state = RPORT_ST_INIT;
141 rdata->event = RPORT_EV_NONE;
142 rdata->flags = FC_RP_FLAGS_REC_SUPPORTED;
143 rdata->e_d_tov = lport->e_d_tov;
144 rdata->r_a_tov = lport->r_a_tov;
145 rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
146 INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout);
147 INIT_WORK(&rdata->event_work, fc_rport_work);
148 if (port_id != FC_FID_DIR_SERV) {
149 rdata->lld_event_callback = lport->tt.rport_event_callback;
150 list_add_rcu(&rdata->peers, &lport->disc.rports);
152 return rdata;
156 * fc_rport_destroy() - Free a remote port after last reference is released
157 * @kref: The remote port's kref
159 static void fc_rport_destroy(struct kref *kref)
161 struct fc_rport_priv *rdata;
163 rdata = container_of(kref, struct fc_rport_priv, kref);
164 kfree_rcu(rdata, rcu);
168 * fc_rport_state() - Return a string identifying the remote port's state
169 * @rdata: The remote port
171 static const char *fc_rport_state(struct fc_rport_priv *rdata)
173 const char *cp;
175 cp = fc_rport_state_names[rdata->rp_state];
176 if (!cp)
177 cp = "Unknown";
178 return cp;
182 * fc_set_rport_loss_tmo() - Set the remote port loss timeout
183 * @rport: The remote port that gets a new timeout value
184 * @timeout: The new timeout value (in seconds)
186 void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
188 if (timeout)
189 rport->dev_loss_tmo = timeout;
190 else
191 rport->dev_loss_tmo = 1;
193 EXPORT_SYMBOL(fc_set_rport_loss_tmo);
196 * fc_plogi_get_maxframe() - Get the maximum payload from the common service
197 * parameters in a FLOGI frame
198 * @flp: The FLOGI or PLOGI payload
199 * @maxval: The maximum frame size upper limit; this may be less than what
200 * is in the service parameters
202 static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
203 unsigned int maxval)
205 unsigned int mfs;
208 * Get max payload from the common service parameters and the
209 * class 3 receive data field size.
211 mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK;
212 if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
213 maxval = mfs;
214 mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs);
215 if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
216 maxval = mfs;
217 return maxval;
221 * fc_rport_state_enter() - Change the state of a remote port
222 * @rdata: The remote port whose state should change
223 * @new: The new state
225 * Locking Note: Called with the rport lock held
227 static void fc_rport_state_enter(struct fc_rport_priv *rdata,
228 enum fc_rport_state new)
230 if (rdata->rp_state != new)
231 rdata->retries = 0;
232 rdata->rp_state = new;
236 * fc_rport_work() - Handler for remote port events in the rport_event_queue
237 * @work: Handle to the remote port being dequeued
239 static void fc_rport_work(struct work_struct *work)
241 u32 port_id;
242 struct fc_rport_priv *rdata =
243 container_of(work, struct fc_rport_priv, event_work);
244 struct fc_rport_libfc_priv *rpriv;
245 enum fc_rport_event event;
246 struct fc_lport *lport = rdata->local_port;
247 struct fc_rport_operations *rport_ops;
248 struct fc_rport_identifiers ids;
249 struct fc_rport *rport;
250 struct fc4_prov *prov;
251 u8 type;
253 mutex_lock(&rdata->rp_mutex);
254 event = rdata->event;
255 rport_ops = rdata->ops;
256 rport = rdata->rport;
258 FC_RPORT_DBG(rdata, "work event %u\n", event);
260 switch (event) {
261 case RPORT_EV_READY:
262 ids = rdata->ids;
263 rdata->event = RPORT_EV_NONE;
264 rdata->major_retries = 0;
265 kref_get(&rdata->kref);
266 mutex_unlock(&rdata->rp_mutex);
268 if (!rport)
269 rport = fc_remote_port_add(lport->host, 0, &ids);
270 if (!rport) {
271 FC_RPORT_DBG(rdata, "Failed to add the rport\n");
272 lport->tt.rport_logoff(rdata);
273 kref_put(&rdata->kref, lport->tt.rport_destroy);
274 return;
276 mutex_lock(&rdata->rp_mutex);
277 if (rdata->rport)
278 FC_RPORT_DBG(rdata, "rport already allocated\n");
279 rdata->rport = rport;
280 rport->maxframe_size = rdata->maxframe_size;
281 rport->supported_classes = rdata->supported_classes;
283 rpriv = rport->dd_data;
284 rpriv->local_port = lport;
285 rpriv->rp_state = rdata->rp_state;
286 rpriv->flags = rdata->flags;
287 rpriv->e_d_tov = rdata->e_d_tov;
288 rpriv->r_a_tov = rdata->r_a_tov;
289 mutex_unlock(&rdata->rp_mutex);
291 if (rport_ops && rport_ops->event_callback) {
292 FC_RPORT_DBG(rdata, "callback ev %d\n", event);
293 rport_ops->event_callback(lport, rdata, event);
295 if (rdata->lld_event_callback) {
296 FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
297 rdata->lld_event_callback(lport, rdata, event);
299 kref_put(&rdata->kref, lport->tt.rport_destroy);
300 break;
302 case RPORT_EV_FAILED:
303 case RPORT_EV_LOGO:
304 case RPORT_EV_STOP:
305 if (rdata->prli_count) {
306 mutex_lock(&fc_prov_mutex);
307 for (type = 1; type < FC_FC4_PROV_SIZE; type++) {
308 prov = fc_passive_prov[type];
309 if (prov && prov->prlo)
310 prov->prlo(rdata);
312 mutex_unlock(&fc_prov_mutex);
314 port_id = rdata->ids.port_id;
315 mutex_unlock(&rdata->rp_mutex);
317 if (rport_ops && rport_ops->event_callback) {
318 FC_RPORT_DBG(rdata, "callback ev %d\n", event);
319 rport_ops->event_callback(lport, rdata, event);
321 if (rdata->lld_event_callback) {
322 FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
323 rdata->lld_event_callback(lport, rdata, event);
325 cancel_delayed_work_sync(&rdata->retry_work);
328 * Reset any outstanding exchanges before freeing rport.
330 lport->tt.exch_mgr_reset(lport, 0, port_id);
331 lport->tt.exch_mgr_reset(lport, port_id, 0);
333 if (rport) {
334 rpriv = rport->dd_data;
335 rpriv->rp_state = RPORT_ST_DELETE;
336 mutex_lock(&rdata->rp_mutex);
337 rdata->rport = NULL;
338 mutex_unlock(&rdata->rp_mutex);
339 fc_remote_port_delete(rport);
342 mutex_lock(&lport->disc.disc_mutex);
343 mutex_lock(&rdata->rp_mutex);
344 if (rdata->rp_state == RPORT_ST_DELETE) {
345 if (port_id == FC_FID_DIR_SERV) {
346 rdata->event = RPORT_EV_NONE;
347 mutex_unlock(&rdata->rp_mutex);
348 kref_put(&rdata->kref, lport->tt.rport_destroy);
349 } else if ((rdata->flags & FC_RP_STARTED) &&
350 rdata->major_retries <
351 lport->max_rport_retry_count) {
352 rdata->major_retries++;
353 rdata->event = RPORT_EV_NONE;
354 FC_RPORT_DBG(rdata, "work restart\n");
355 fc_rport_enter_flogi(rdata);
356 mutex_unlock(&rdata->rp_mutex);
357 } else {
358 FC_RPORT_DBG(rdata, "work delete\n");
359 list_del_rcu(&rdata->peers);
360 mutex_unlock(&rdata->rp_mutex);
361 kref_put(&rdata->kref, lport->tt.rport_destroy);
363 } else {
365 * Re-open for events. Reissue READY event if ready.
367 rdata->event = RPORT_EV_NONE;
368 if (rdata->rp_state == RPORT_ST_READY)
369 fc_rport_enter_ready(rdata);
370 mutex_unlock(&rdata->rp_mutex);
372 mutex_unlock(&lport->disc.disc_mutex);
373 break;
375 default:
376 mutex_unlock(&rdata->rp_mutex);
377 break;
382 * fc_rport_login() - Start the remote port login state machine
383 * @rdata: The remote port to be logged in to
385 * Locking Note: Called without the rport lock held. This
386 * function will hold the rport lock, call an _enter_*
387 * function and then unlock the rport.
389 * This indicates the intent to be logged into the remote port.
390 * If it appears we are already logged in, ADISC is used to verify
391 * the setup.
393 int fc_rport_login(struct fc_rport_priv *rdata)
395 mutex_lock(&rdata->rp_mutex);
397 rdata->flags |= FC_RP_STARTED;
398 switch (rdata->rp_state) {
399 case RPORT_ST_READY:
400 FC_RPORT_DBG(rdata, "ADISC port\n");
401 fc_rport_enter_adisc(rdata);
402 break;
403 case RPORT_ST_DELETE:
404 FC_RPORT_DBG(rdata, "Restart deleted port\n");
405 break;
406 default:
407 FC_RPORT_DBG(rdata, "Login to port\n");
408 fc_rport_enter_flogi(rdata);
409 break;
411 mutex_unlock(&rdata->rp_mutex);
413 return 0;
417 * fc_rport_enter_delete() - Schedule a remote port to be deleted
418 * @rdata: The remote port to be deleted
419 * @event: The event to report as the reason for deletion
421 * Locking Note: Called with the rport lock held.
423 * Allow state change into DELETE only once.
425 * Call queue_work only if there's no event already pending.
426 * Set the new event so that the old pending event will not occur.
427 * Since we have the mutex, even if fc_rport_work() is already started,
428 * it'll see the new event.
430 static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
431 enum fc_rport_event event)
433 if (rdata->rp_state == RPORT_ST_DELETE)
434 return;
436 FC_RPORT_DBG(rdata, "Delete port\n");
438 fc_rport_state_enter(rdata, RPORT_ST_DELETE);
440 if (rdata->event == RPORT_EV_NONE)
441 queue_work(rport_event_queue, &rdata->event_work);
442 rdata->event = event;
446 * fc_rport_logoff() - Logoff and remove a remote port
447 * @rdata: The remote port to be logged off of
449 * Locking Note: Called without the rport lock held. This
450 * function will hold the rport lock, call an _enter_*
451 * function and then unlock the rport.
453 int fc_rport_logoff(struct fc_rport_priv *rdata)
455 mutex_lock(&rdata->rp_mutex);
457 FC_RPORT_DBG(rdata, "Remove port\n");
459 rdata->flags &= ~FC_RP_STARTED;
460 if (rdata->rp_state == RPORT_ST_DELETE) {
461 FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n");
462 goto out;
464 fc_rport_enter_logo(rdata);
467 * Change the state to Delete so that we discard
468 * the response.
470 fc_rport_enter_delete(rdata, RPORT_EV_STOP);
471 out:
472 mutex_unlock(&rdata->rp_mutex);
473 return 0;
477 * fc_rport_enter_ready() - Transition to the RPORT_ST_READY state
478 * @rdata: The remote port that is ready
480 * Locking Note: The rport lock is expected to be held before calling
481 * this routine.
483 static void fc_rport_enter_ready(struct fc_rport_priv *rdata)
485 fc_rport_state_enter(rdata, RPORT_ST_READY);
487 FC_RPORT_DBG(rdata, "Port is Ready\n");
489 if (rdata->event == RPORT_EV_NONE)
490 queue_work(rport_event_queue, &rdata->event_work);
491 rdata->event = RPORT_EV_READY;
495 * fc_rport_timeout() - Handler for the retry_work timer
496 * @work: Handle to the remote port that has timed out
498 * Locking Note: Called without the rport lock held. This
499 * function will hold the rport lock, call an _enter_*
500 * function and then unlock the rport.
502 static void fc_rport_timeout(struct work_struct *work)
504 struct fc_rport_priv *rdata =
505 container_of(work, struct fc_rport_priv, retry_work.work);
507 mutex_lock(&rdata->rp_mutex);
509 switch (rdata->rp_state) {
510 case RPORT_ST_FLOGI:
511 fc_rport_enter_flogi(rdata);
512 break;
513 case RPORT_ST_PLOGI:
514 fc_rport_enter_plogi(rdata);
515 break;
516 case RPORT_ST_PRLI:
517 fc_rport_enter_prli(rdata);
518 break;
519 case RPORT_ST_RTV:
520 fc_rport_enter_rtv(rdata);
521 break;
522 case RPORT_ST_ADISC:
523 fc_rport_enter_adisc(rdata);
524 break;
525 case RPORT_ST_PLOGI_WAIT:
526 case RPORT_ST_READY:
527 case RPORT_ST_INIT:
528 case RPORT_ST_DELETE:
529 break;
532 mutex_unlock(&rdata->rp_mutex);
536 * fc_rport_error() - Error handler, called once retries have been exhausted
537 * @rdata: The remote port the error is happened on
538 * @fp: The error code encapsulated in a frame pointer
540 * Locking Note: The rport lock is expected to be held before
541 * calling this routine
543 static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp)
545 FC_RPORT_DBG(rdata, "Error %ld in state %s, retries %d\n",
546 IS_ERR(fp) ? -PTR_ERR(fp) : 0,
547 fc_rport_state(rdata), rdata->retries);
549 switch (rdata->rp_state) {
550 case RPORT_ST_FLOGI:
551 case RPORT_ST_PLOGI:
552 rdata->flags &= ~FC_RP_STARTED;
553 fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
554 break;
555 case RPORT_ST_RTV:
556 fc_rport_enter_ready(rdata);
557 break;
558 case RPORT_ST_PRLI:
559 case RPORT_ST_ADISC:
560 fc_rport_enter_logo(rdata);
561 break;
562 case RPORT_ST_PLOGI_WAIT:
563 case RPORT_ST_DELETE:
564 case RPORT_ST_READY:
565 case RPORT_ST_INIT:
566 break;
571 * fc_rport_error_retry() - Handler for remote port state retries
572 * @rdata: The remote port whose state is to be retried
573 * @fp: The error code encapsulated in a frame pointer
575 * If the error was an exchange timeout retry immediately,
576 * otherwise wait for E_D_TOV.
578 * Locking Note: The rport lock is expected to be held before
579 * calling this routine
581 static void fc_rport_error_retry(struct fc_rport_priv *rdata,
582 struct fc_frame *fp)
584 unsigned long delay = FC_DEF_E_D_TOV;
586 /* make sure this isn't an FC_EX_CLOSED error, never retry those */
587 if (PTR_ERR(fp) == -FC_EX_CLOSED)
588 goto out;
590 if (rdata->retries < rdata->local_port->max_rport_retry_count) {
591 FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n",
592 PTR_ERR(fp), fc_rport_state(rdata));
593 rdata->retries++;
594 /* no additional delay on exchange timeouts */
595 if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
596 delay = 0;
597 schedule_delayed_work(&rdata->retry_work, delay);
598 return;
601 out:
602 fc_rport_error(rdata, fp);
606 * fc_rport_login_complete() - Handle parameters and completion of p-mp login.
607 * @rdata: The remote port which we logged into or which logged into us.
608 * @fp: The FLOGI or PLOGI request or response frame
610 * Returns non-zero error if a problem is detected with the frame.
611 * Does not free the frame.
613 * This is only used in point-to-multipoint mode for FIP currently.
615 static int fc_rport_login_complete(struct fc_rport_priv *rdata,
616 struct fc_frame *fp)
618 struct fc_lport *lport = rdata->local_port;
619 struct fc_els_flogi *flogi;
620 unsigned int e_d_tov;
621 u16 csp_flags;
623 flogi = fc_frame_payload_get(fp, sizeof(*flogi));
624 if (!flogi)
625 return -EINVAL;
627 csp_flags = ntohs(flogi->fl_csp.sp_features);
629 if (fc_frame_payload_op(fp) == ELS_FLOGI) {
630 if (csp_flags & FC_SP_FT_FPORT) {
631 FC_RPORT_DBG(rdata, "Fabric bit set in FLOGI\n");
632 return -EINVAL;
634 } else {
637 * E_D_TOV is not valid on an incoming FLOGI request.
639 e_d_tov = ntohl(flogi->fl_csp.sp_e_d_tov);
640 if (csp_flags & FC_SP_FT_EDTR)
641 e_d_tov /= 1000000;
642 if (e_d_tov > rdata->e_d_tov)
643 rdata->e_d_tov = e_d_tov;
645 rdata->maxframe_size = fc_plogi_get_maxframe(flogi, lport->mfs);
646 return 0;
650 * fc_rport_flogi_resp() - Handle response to FLOGI request for p-mp mode
651 * @sp: The sequence that the FLOGI was on
652 * @fp: The FLOGI response frame
653 * @rp_arg: The remote port that received the FLOGI response
655 void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
656 void *rp_arg)
658 struct fc_rport_priv *rdata = rp_arg;
659 struct fc_lport *lport = rdata->local_port;
660 struct fc_els_flogi *flogi;
661 unsigned int r_a_tov;
663 FC_RPORT_DBG(rdata, "Received a FLOGI %s\n", fc_els_resp_type(fp));
665 if (fp == ERR_PTR(-FC_EX_CLOSED))
666 goto put;
668 mutex_lock(&rdata->rp_mutex);
670 if (rdata->rp_state != RPORT_ST_FLOGI) {
671 FC_RPORT_DBG(rdata, "Received a FLOGI response, but in state "
672 "%s\n", fc_rport_state(rdata));
673 if (IS_ERR(fp))
674 goto err;
675 goto out;
678 if (IS_ERR(fp)) {
679 fc_rport_error(rdata, fp);
680 goto err;
683 if (fc_frame_payload_op(fp) != ELS_LS_ACC)
684 goto bad;
685 if (fc_rport_login_complete(rdata, fp))
686 goto bad;
688 flogi = fc_frame_payload_get(fp, sizeof(*flogi));
689 if (!flogi)
690 goto bad;
691 r_a_tov = ntohl(flogi->fl_csp.sp_r_a_tov);
692 if (r_a_tov > rdata->r_a_tov)
693 rdata->r_a_tov = r_a_tov;
695 if (rdata->ids.port_name < lport->wwpn)
696 fc_rport_enter_plogi(rdata);
697 else
698 fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
699 out:
700 fc_frame_free(fp);
701 err:
702 mutex_unlock(&rdata->rp_mutex);
703 put:
704 kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
705 return;
706 bad:
707 FC_RPORT_DBG(rdata, "Bad FLOGI response\n");
708 fc_rport_error_retry(rdata, fp);
709 goto out;
713 * fc_rport_enter_flogi() - Send a FLOGI request to the remote port for p-mp
714 * @rdata: The remote port to send a FLOGI to
716 * Locking Note: The rport lock is expected to be held before calling
717 * this routine.
719 static void fc_rport_enter_flogi(struct fc_rport_priv *rdata)
721 struct fc_lport *lport = rdata->local_port;
722 struct fc_frame *fp;
724 if (!lport->point_to_multipoint)
725 return fc_rport_enter_plogi(rdata);
727 FC_RPORT_DBG(rdata, "Entered FLOGI state from %s state\n",
728 fc_rport_state(rdata));
730 fc_rport_state_enter(rdata, RPORT_ST_FLOGI);
732 fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
733 if (!fp)
734 return fc_rport_error_retry(rdata, fp);
736 if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_FLOGI,
737 fc_rport_flogi_resp, rdata,
738 2 * lport->r_a_tov))
739 fc_rport_error_retry(rdata, NULL);
740 else
741 kref_get(&rdata->kref);
745 * fc_rport_recv_flogi_req() - Handle Fabric Login (FLOGI) request in p-mp mode
746 * @lport: The local port that received the PLOGI request
747 * @rx_fp: The PLOGI request frame
749 static void fc_rport_recv_flogi_req(struct fc_lport *lport,
750 struct fc_frame *rx_fp)
752 struct fc_disc *disc;
753 struct fc_els_flogi *flp;
754 struct fc_rport_priv *rdata;
755 struct fc_frame *fp = rx_fp;
756 struct fc_seq_els_data rjt_data;
757 u32 sid;
759 sid = fc_frame_sid(fp);
761 FC_RPORT_ID_DBG(lport, sid, "Received FLOGI request\n");
763 disc = &lport->disc;
764 mutex_lock(&disc->disc_mutex);
766 if (!lport->point_to_multipoint) {
767 rjt_data.reason = ELS_RJT_UNSUP;
768 rjt_data.explan = ELS_EXPL_NONE;
769 goto reject;
772 flp = fc_frame_payload_get(fp, sizeof(*flp));
773 if (!flp) {
774 rjt_data.reason = ELS_RJT_LOGIC;
775 rjt_data.explan = ELS_EXPL_INV_LEN;
776 goto reject;
779 rdata = lport->tt.rport_lookup(lport, sid);
780 if (!rdata) {
781 rjt_data.reason = ELS_RJT_FIP;
782 rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR;
783 goto reject;
785 mutex_lock(&rdata->rp_mutex);
787 FC_RPORT_DBG(rdata, "Received FLOGI in %s state\n",
788 fc_rport_state(rdata));
790 switch (rdata->rp_state) {
791 case RPORT_ST_INIT:
793 * If received the FLOGI request on RPORT which is INIT state
794 * (means not transition to FLOGI either fc_rport timeout
795 * function didn;t trigger or this end hasn;t received
796 * beacon yet from other end. In that case only, allow RPORT
797 * state machine to continue, otherwise fall through which
798 * causes the code to send reject response.
799 * NOTE; Not checking for FIP->state such as VNMP_UP or
800 * VNMP_CLAIM because if FIP state is not one of those,
801 * RPORT wouldn;t have created and 'rport_lookup' would have
802 * failed anyway in that case.
804 if (lport->point_to_multipoint)
805 break;
806 case RPORT_ST_DELETE:
807 mutex_unlock(&rdata->rp_mutex);
808 rjt_data.reason = ELS_RJT_FIP;
809 rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR;
810 goto reject;
811 case RPORT_ST_FLOGI:
812 case RPORT_ST_PLOGI_WAIT:
813 case RPORT_ST_PLOGI:
814 break;
815 case RPORT_ST_PRLI:
816 case RPORT_ST_RTV:
817 case RPORT_ST_READY:
818 case RPORT_ST_ADISC:
820 * Set the remote port to be deleted and to then restart.
821 * This queues work to be sure exchanges are reset.
823 fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
824 mutex_unlock(&rdata->rp_mutex);
825 rjt_data.reason = ELS_RJT_BUSY;
826 rjt_data.explan = ELS_EXPL_NONE;
827 goto reject;
829 if (fc_rport_login_complete(rdata, fp)) {
830 mutex_unlock(&rdata->rp_mutex);
831 rjt_data.reason = ELS_RJT_LOGIC;
832 rjt_data.explan = ELS_EXPL_NONE;
833 goto reject;
836 fp = fc_frame_alloc(lport, sizeof(*flp));
837 if (!fp)
838 goto out;
840 fc_flogi_fill(lport, fp);
841 flp = fc_frame_payload_get(fp, sizeof(*flp));
842 flp->fl_cmd = ELS_LS_ACC;
844 fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
845 lport->tt.frame_send(lport, fp);
847 if (rdata->ids.port_name < lport->wwpn)
848 fc_rport_enter_plogi(rdata);
849 else
850 fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
851 out:
852 mutex_unlock(&rdata->rp_mutex);
853 mutex_unlock(&disc->disc_mutex);
854 fc_frame_free(rx_fp);
855 return;
857 reject:
858 mutex_unlock(&disc->disc_mutex);
859 lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
860 fc_frame_free(rx_fp);
864 * fc_rport_plogi_resp() - Handler for ELS PLOGI responses
865 * @sp: The sequence the PLOGI is on
866 * @fp: The PLOGI response frame
867 * @rdata_arg: The remote port that sent the PLOGI response
869 * Locking Note: This function will be called without the rport lock
870 * held, but it will lock, call an _enter_* function or fc_rport_error
871 * and then unlock the rport.
873 static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
874 void *rdata_arg)
876 struct fc_rport_priv *rdata = rdata_arg;
877 struct fc_lport *lport = rdata->local_port;
878 struct fc_els_flogi *plp = NULL;
879 u16 csp_seq;
880 u16 cssp_seq;
881 u8 op;
883 mutex_lock(&rdata->rp_mutex);
885 FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp));
887 if (rdata->rp_state != RPORT_ST_PLOGI) {
888 FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state "
889 "%s\n", fc_rport_state(rdata));
890 if (IS_ERR(fp))
891 goto err;
892 goto out;
895 if (IS_ERR(fp)) {
896 fc_rport_error_retry(rdata, fp);
897 goto err;
900 op = fc_frame_payload_op(fp);
901 if (op == ELS_LS_ACC &&
902 (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
903 rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn);
904 rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn);
906 /* save plogi response sp_features for further reference */
907 rdata->sp_features = ntohs(plp->fl_csp.sp_features);
909 if (lport->point_to_multipoint)
910 fc_rport_login_complete(rdata, fp);
911 csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
912 cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq);
913 if (cssp_seq < csp_seq)
914 csp_seq = cssp_seq;
915 rdata->max_seq = csp_seq;
916 rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs);
917 fc_rport_enter_prli(rdata);
918 } else
919 fc_rport_error_retry(rdata, fp);
921 out:
922 fc_frame_free(fp);
923 err:
924 mutex_unlock(&rdata->rp_mutex);
925 kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
929 * fc_rport_enter_plogi() - Send Port Login (PLOGI) request
930 * @rdata: The remote port to send a PLOGI to
932 * Locking Note: The rport lock is expected to be held before calling
933 * this routine.
935 static void fc_rport_enter_plogi(struct fc_rport_priv *rdata)
937 struct fc_lport *lport = rdata->local_port;
938 struct fc_frame *fp;
940 FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n",
941 fc_rport_state(rdata));
943 fc_rport_state_enter(rdata, RPORT_ST_PLOGI);
945 rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
946 fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
947 if (!fp) {
948 FC_RPORT_DBG(rdata, "%s frame alloc failed\n", __func__);
949 fc_rport_error_retry(rdata, fp);
950 return;
952 rdata->e_d_tov = lport->e_d_tov;
954 if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI,
955 fc_rport_plogi_resp, rdata,
956 2 * lport->r_a_tov))
957 fc_rport_error_retry(rdata, NULL);
958 else
959 kref_get(&rdata->kref);
963 * fc_rport_prli_resp() - Process Login (PRLI) response handler
964 * @sp: The sequence the PRLI response was on
965 * @fp: The PRLI response frame
966 * @rdata_arg: The remote port that sent the PRLI response
968 * Locking Note: This function will be called without the rport lock
969 * held, but it will lock, call an _enter_* function or fc_rport_error
970 * and then unlock the rport.
972 static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
973 void *rdata_arg)
975 struct fc_rport_priv *rdata = rdata_arg;
976 struct {
977 struct fc_els_prli prli;
978 struct fc_els_spp spp;
979 } *pp;
980 struct fc_els_spp temp_spp;
981 struct fc4_prov *prov;
982 u32 roles = FC_RPORT_ROLE_UNKNOWN;
983 u32 fcp_parm = 0;
984 u8 op;
985 u8 resp_code = 0;
987 mutex_lock(&rdata->rp_mutex);
989 FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp));
991 if (rdata->rp_state != RPORT_ST_PRLI) {
992 FC_RPORT_DBG(rdata, "Received a PRLI response, but in state "
993 "%s\n", fc_rport_state(rdata));
994 if (IS_ERR(fp))
995 goto err;
996 goto out;
999 if (IS_ERR(fp)) {
1000 fc_rport_error_retry(rdata, fp);
1001 goto err;
1004 /* reinitialize remote port roles */
1005 rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
1007 op = fc_frame_payload_op(fp);
1008 if (op == ELS_LS_ACC) {
1009 pp = fc_frame_payload_get(fp, sizeof(*pp));
1010 if (!pp)
1011 goto out;
1013 resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
1014 FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x\n",
1015 pp->spp.spp_flags);
1016 rdata->spp_type = pp->spp.spp_type;
1017 if (resp_code != FC_SPP_RESP_ACK) {
1018 if (resp_code == FC_SPP_RESP_CONF)
1019 fc_rport_error(rdata, fp);
1020 else
1021 fc_rport_error_retry(rdata, fp);
1022 goto out;
1024 if (pp->prli.prli_spp_len < sizeof(pp->spp))
1025 goto out;
1027 fcp_parm = ntohl(pp->spp.spp_params);
1028 if (fcp_parm & FCP_SPPF_RETRY)
1029 rdata->flags |= FC_RP_FLAGS_RETRY;
1030 if (fcp_parm & FCP_SPPF_CONF_COMPL)
1031 rdata->flags |= FC_RP_FLAGS_CONF_REQ;
1033 prov = fc_passive_prov[FC_TYPE_FCP];
1034 if (prov) {
1035 memset(&temp_spp, 0, sizeof(temp_spp));
1036 prov->prli(rdata, pp->prli.prli_spp_len,
1037 &pp->spp, &temp_spp);
1040 rdata->supported_classes = FC_COS_CLASS3;
1041 if (fcp_parm & FCP_SPPF_INIT_FCN)
1042 roles |= FC_RPORT_ROLE_FCP_INITIATOR;
1043 if (fcp_parm & FCP_SPPF_TARG_FCN)
1044 roles |= FC_RPORT_ROLE_FCP_TARGET;
1046 rdata->ids.roles = roles;
1047 fc_rport_enter_rtv(rdata);
1049 } else {
1050 FC_RPORT_DBG(rdata, "Bad ELS response for PRLI command\n");
1051 fc_rport_error_retry(rdata, fp);
1054 out:
1055 fc_frame_free(fp);
1056 err:
1057 mutex_unlock(&rdata->rp_mutex);
1058 kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
1062 * fc_rport_enter_prli() - Send Process Login (PRLI) request
1063 * @rdata: The remote port to send the PRLI request to
1065 * Locking Note: The rport lock is expected to be held before calling
1066 * this routine.
1068 static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
1070 struct fc_lport *lport = rdata->local_port;
1071 struct {
1072 struct fc_els_prli prli;
1073 struct fc_els_spp spp;
1074 } *pp;
1075 struct fc_frame *fp;
1076 struct fc4_prov *prov;
1079 * If the rport is one of the well known addresses
1080 * we skip PRLI and RTV and go straight to READY.
1082 if (rdata->ids.port_id >= FC_FID_DOM_MGR) {
1083 fc_rport_enter_ready(rdata);
1084 return;
1087 FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n",
1088 fc_rport_state(rdata));
1090 fc_rport_state_enter(rdata, RPORT_ST_PRLI);
1092 fp = fc_frame_alloc(lport, sizeof(*pp));
1093 if (!fp) {
1094 fc_rport_error_retry(rdata, fp);
1095 return;
1098 fc_prli_fill(lport, fp);
1100 prov = fc_passive_prov[FC_TYPE_FCP];
1101 if (prov) {
1102 pp = fc_frame_payload_get(fp, sizeof(*pp));
1103 prov->prli(rdata, sizeof(pp->spp), NULL, &pp->spp);
1106 fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rdata->ids.port_id,
1107 fc_host_port_id(lport->host), FC_TYPE_ELS,
1108 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1110 if (!lport->tt.exch_seq_send(lport, fp, fc_rport_prli_resp,
1111 NULL, rdata, 2 * lport->r_a_tov))
1112 fc_rport_error_retry(rdata, NULL);
1113 else
1114 kref_get(&rdata->kref);
1118 * fc_rport_els_rtv_resp() - Handler for Request Timeout Value (RTV) responses
1119 * @sp: The sequence the RTV was on
1120 * @fp: The RTV response frame
1121 * @rdata_arg: The remote port that sent the RTV response
1123 * Many targets don't seem to support this.
1125 * Locking Note: This function will be called without the rport lock
1126 * held, but it will lock, call an _enter_* function or fc_rport_error
1127 * and then unlock the rport.
1129 static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
1130 void *rdata_arg)
1132 struct fc_rport_priv *rdata = rdata_arg;
1133 u8 op;
1135 mutex_lock(&rdata->rp_mutex);
1137 FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp));
1139 if (rdata->rp_state != RPORT_ST_RTV) {
1140 FC_RPORT_DBG(rdata, "Received a RTV response, but in state "
1141 "%s\n", fc_rport_state(rdata));
1142 if (IS_ERR(fp))
1143 goto err;
1144 goto out;
1147 if (IS_ERR(fp)) {
1148 fc_rport_error(rdata, fp);
1149 goto err;
1152 op = fc_frame_payload_op(fp);
1153 if (op == ELS_LS_ACC) {
1154 struct fc_els_rtv_acc *rtv;
1155 u32 toq;
1156 u32 tov;
1158 rtv = fc_frame_payload_get(fp, sizeof(*rtv));
1159 if (rtv) {
1160 toq = ntohl(rtv->rtv_toq);
1161 tov = ntohl(rtv->rtv_r_a_tov);
1162 if (tov == 0)
1163 tov = 1;
1164 rdata->r_a_tov = tov;
1165 tov = ntohl(rtv->rtv_e_d_tov);
1166 if (toq & FC_ELS_RTV_EDRES)
1167 tov /= 1000000;
1168 if (tov == 0)
1169 tov = 1;
1170 rdata->e_d_tov = tov;
1174 fc_rport_enter_ready(rdata);
1176 out:
1177 fc_frame_free(fp);
1178 err:
1179 mutex_unlock(&rdata->rp_mutex);
1180 kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
1184 * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request
1185 * @rdata: The remote port to send the RTV request to
1187 * Locking Note: The rport lock is expected to be held before calling
1188 * this routine.
1190 static void fc_rport_enter_rtv(struct fc_rport_priv *rdata)
1192 struct fc_frame *fp;
1193 struct fc_lport *lport = rdata->local_port;
1195 FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n",
1196 fc_rport_state(rdata));
1198 fc_rport_state_enter(rdata, RPORT_ST_RTV);
1200 fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
1201 if (!fp) {
1202 fc_rport_error_retry(rdata, fp);
1203 return;
1206 if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV,
1207 fc_rport_rtv_resp, rdata,
1208 2 * lport->r_a_tov))
1209 fc_rport_error_retry(rdata, NULL);
1210 else
1211 kref_get(&rdata->kref);
1215 * fc_rport_logo_resp() - Handler for logout (LOGO) responses
1216 * @sp: The sequence the LOGO was on
1217 * @fp: The LOGO response frame
1218 * @lport_arg: The local port
1220 static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
1221 void *lport_arg)
1223 struct fc_lport *lport = lport_arg;
1225 FC_RPORT_ID_DBG(lport, fc_seq_exch(sp)->did,
1226 "Received a LOGO %s\n", fc_els_resp_type(fp));
1227 if (IS_ERR(fp))
1228 return;
1229 fc_frame_free(fp);
1233 * fc_rport_enter_logo() - Send a logout (LOGO) request
1234 * @rdata: The remote port to send the LOGO request to
1236 * Locking Note: The rport lock is expected to be held before calling
1237 * this routine.
1239 static void fc_rport_enter_logo(struct fc_rport_priv *rdata)
1241 struct fc_lport *lport = rdata->local_port;
1242 struct fc_frame *fp;
1244 FC_RPORT_DBG(rdata, "Port sending LOGO from %s state\n",
1245 fc_rport_state(rdata));
1247 fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
1248 if (!fp)
1249 return;
1250 (void)lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO,
1251 fc_rport_logo_resp, lport, 0);
1255 * fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses
1256 * @sp: The sequence the ADISC response was on
1257 * @fp: The ADISC response frame
1258 * @rdata_arg: The remote port that sent the ADISC response
1260 * Locking Note: This function will be called without the rport lock
1261 * held, but it will lock, call an _enter_* function or fc_rport_error
1262 * and then unlock the rport.
1264 static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
1265 void *rdata_arg)
1267 struct fc_rport_priv *rdata = rdata_arg;
1268 struct fc_els_adisc *adisc;
1269 u8 op;
1271 mutex_lock(&rdata->rp_mutex);
1273 FC_RPORT_DBG(rdata, "Received a ADISC response\n");
1275 if (rdata->rp_state != RPORT_ST_ADISC) {
1276 FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n",
1277 fc_rport_state(rdata));
1278 if (IS_ERR(fp))
1279 goto err;
1280 goto out;
1283 if (IS_ERR(fp)) {
1284 fc_rport_error(rdata, fp);
1285 goto err;
1289 * If address verification failed. Consider us logged out of the rport.
1290 * Since the rport is still in discovery, we want to be
1291 * logged in, so go to PLOGI state. Otherwise, go back to READY.
1293 op = fc_frame_payload_op(fp);
1294 adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1295 if (op != ELS_LS_ACC || !adisc ||
1296 ntoh24(adisc->adisc_port_id) != rdata->ids.port_id ||
1297 get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name ||
1298 get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) {
1299 FC_RPORT_DBG(rdata, "ADISC error or mismatch\n");
1300 fc_rport_enter_flogi(rdata);
1301 } else {
1302 FC_RPORT_DBG(rdata, "ADISC OK\n");
1303 fc_rport_enter_ready(rdata);
1305 out:
1306 fc_frame_free(fp);
1307 err:
1308 mutex_unlock(&rdata->rp_mutex);
1309 kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
1313 * fc_rport_enter_adisc() - Send Address Discover (ADISC) request
1314 * @rdata: The remote port to send the ADISC request to
1316 * Locking Note: The rport lock is expected to be held before calling
1317 * this routine.
1319 static void fc_rport_enter_adisc(struct fc_rport_priv *rdata)
1321 struct fc_lport *lport = rdata->local_port;
1322 struct fc_frame *fp;
1324 FC_RPORT_DBG(rdata, "sending ADISC from %s state\n",
1325 fc_rport_state(rdata));
1327 fc_rport_state_enter(rdata, RPORT_ST_ADISC);
1329 fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc));
1330 if (!fp) {
1331 fc_rport_error_retry(rdata, fp);
1332 return;
1334 if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
1335 fc_rport_adisc_resp, rdata,
1336 2 * lport->r_a_tov))
1337 fc_rport_error_retry(rdata, NULL);
1338 else
1339 kref_get(&rdata->kref);
1343 * fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests
1344 * @rdata: The remote port that sent the ADISC request
1345 * @in_fp: The ADISC request frame
1347 * Locking Note: Called with the lport and rport locks held.
1349 static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata,
1350 struct fc_frame *in_fp)
1352 struct fc_lport *lport = rdata->local_port;
1353 struct fc_frame *fp;
1354 struct fc_els_adisc *adisc;
1355 struct fc_seq_els_data rjt_data;
1357 FC_RPORT_DBG(rdata, "Received ADISC request\n");
1359 adisc = fc_frame_payload_get(in_fp, sizeof(*adisc));
1360 if (!adisc) {
1361 rjt_data.reason = ELS_RJT_PROT;
1362 rjt_data.explan = ELS_EXPL_INV_LEN;
1363 lport->tt.seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data);
1364 goto drop;
1367 fp = fc_frame_alloc(lport, sizeof(*adisc));
1368 if (!fp)
1369 goto drop;
1370 fc_adisc_fill(lport, fp);
1371 adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1372 adisc->adisc_cmd = ELS_LS_ACC;
1373 fc_fill_reply_hdr(fp, in_fp, FC_RCTL_ELS_REP, 0);
1374 lport->tt.frame_send(lport, fp);
1375 drop:
1376 fc_frame_free(in_fp);
1380 * fc_rport_recv_rls_req() - Handle received Read Link Status request
1381 * @rdata: The remote port that sent the RLS request
1382 * @rx_fp: The PRLI request frame
1384 * Locking Note: The rport lock is expected to be held before calling
1385 * this function.
1387 static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata,
1388 struct fc_frame *rx_fp)
1391 struct fc_lport *lport = rdata->local_port;
1392 struct fc_frame *fp;
1393 struct fc_els_rls *rls;
1394 struct fc_els_rls_resp *rsp;
1395 struct fc_els_lesb *lesb;
1396 struct fc_seq_els_data rjt_data;
1397 struct fc_host_statistics *hst;
1399 FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n",
1400 fc_rport_state(rdata));
1402 rls = fc_frame_payload_get(rx_fp, sizeof(*rls));
1403 if (!rls) {
1404 rjt_data.reason = ELS_RJT_PROT;
1405 rjt_data.explan = ELS_EXPL_INV_LEN;
1406 goto out_rjt;
1409 fp = fc_frame_alloc(lport, sizeof(*rsp));
1410 if (!fp) {
1411 rjt_data.reason = ELS_RJT_UNAB;
1412 rjt_data.explan = ELS_EXPL_INSUF_RES;
1413 goto out_rjt;
1416 rsp = fc_frame_payload_get(fp, sizeof(*rsp));
1417 memset(rsp, 0, sizeof(*rsp));
1418 rsp->rls_cmd = ELS_LS_ACC;
1419 lesb = &rsp->rls_lesb;
1420 if (lport->tt.get_lesb) {
1421 /* get LESB from LLD if it supports it */
1422 lport->tt.get_lesb(lport, lesb);
1423 } else {
1424 fc_get_host_stats(lport->host);
1425 hst = &lport->host_stats;
1426 lesb->lesb_link_fail = htonl(hst->link_failure_count);
1427 lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count);
1428 lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count);
1429 lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count);
1430 lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count);
1431 lesb->lesb_inv_crc = htonl(hst->invalid_crc_count);
1434 fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1435 lport->tt.frame_send(lport, fp);
1436 goto out;
1438 out_rjt:
1439 lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1440 out:
1441 fc_frame_free(rx_fp);
1445 * fc_rport_recv_els_req() - Handler for validated ELS requests
1446 * @lport: The local port that received the ELS request
1447 * @fp: The ELS request frame
1449 * Handle incoming ELS requests that require port login.
1450 * The ELS opcode has already been validated by the caller.
1452 * Locking Note: Called with the lport lock held.
1454 static void fc_rport_recv_els_req(struct fc_lport *lport, struct fc_frame *fp)
1456 struct fc_rport_priv *rdata;
1457 struct fc_seq_els_data els_data;
1459 mutex_lock(&lport->disc.disc_mutex);
1460 rdata = lport->tt.rport_lookup(lport, fc_frame_sid(fp));
1461 if (!rdata) {
1462 mutex_unlock(&lport->disc.disc_mutex);
1463 goto reject;
1465 mutex_lock(&rdata->rp_mutex);
1466 mutex_unlock(&lport->disc.disc_mutex);
1468 switch (rdata->rp_state) {
1469 case RPORT_ST_PRLI:
1470 case RPORT_ST_RTV:
1471 case RPORT_ST_READY:
1472 case RPORT_ST_ADISC:
1473 break;
1474 default:
1475 mutex_unlock(&rdata->rp_mutex);
1476 goto reject;
1479 switch (fc_frame_payload_op(fp)) {
1480 case ELS_PRLI:
1481 fc_rport_recv_prli_req(rdata, fp);
1482 break;
1483 case ELS_PRLO:
1484 fc_rport_recv_prlo_req(rdata, fp);
1485 break;
1486 case ELS_ADISC:
1487 fc_rport_recv_adisc_req(rdata, fp);
1488 break;
1489 case ELS_RRQ:
1490 lport->tt.seq_els_rsp_send(fp, ELS_RRQ, NULL);
1491 fc_frame_free(fp);
1492 break;
1493 case ELS_REC:
1494 lport->tt.seq_els_rsp_send(fp, ELS_REC, NULL);
1495 fc_frame_free(fp);
1496 break;
1497 case ELS_RLS:
1498 fc_rport_recv_rls_req(rdata, fp);
1499 break;
1500 default:
1501 fc_frame_free(fp); /* can't happen */
1502 break;
1505 mutex_unlock(&rdata->rp_mutex);
1506 return;
1508 reject:
1509 els_data.reason = ELS_RJT_UNAB;
1510 els_data.explan = ELS_EXPL_PLOGI_REQD;
1511 lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1512 fc_frame_free(fp);
1516 * fc_rport_recv_req() - Handler for requests
1517 * @lport: The local port that received the request
1518 * @fp: The request frame
1520 * Locking Note: Called with the lport lock held.
1522 void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
1524 struct fc_seq_els_data els_data;
1527 * Handle FLOGI, PLOGI and LOGO requests separately, since they
1528 * don't require prior login.
1529 * Check for unsupported opcodes first and reject them.
1530 * For some ops, it would be incorrect to reject with "PLOGI required".
1532 switch (fc_frame_payload_op(fp)) {
1533 case ELS_FLOGI:
1534 fc_rport_recv_flogi_req(lport, fp);
1535 break;
1536 case ELS_PLOGI:
1537 fc_rport_recv_plogi_req(lport, fp);
1538 break;
1539 case ELS_LOGO:
1540 fc_rport_recv_logo_req(lport, fp);
1541 break;
1542 case ELS_PRLI:
1543 case ELS_PRLO:
1544 case ELS_ADISC:
1545 case ELS_RRQ:
1546 case ELS_REC:
1547 case ELS_RLS:
1548 fc_rport_recv_els_req(lport, fp);
1549 break;
1550 default:
1551 els_data.reason = ELS_RJT_UNSUP;
1552 els_data.explan = ELS_EXPL_NONE;
1553 lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1554 fc_frame_free(fp);
1555 break;
1560 * fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests
1561 * @lport: The local port that received the PLOGI request
1562 * @rx_fp: The PLOGI request frame
1564 * Locking Note: The rport lock is held before calling this function.
1566 static void fc_rport_recv_plogi_req(struct fc_lport *lport,
1567 struct fc_frame *rx_fp)
1569 struct fc_disc *disc;
1570 struct fc_rport_priv *rdata;
1571 struct fc_frame *fp = rx_fp;
1572 struct fc_els_flogi *pl;
1573 struct fc_seq_els_data rjt_data;
1574 u32 sid;
1576 sid = fc_frame_sid(fp);
1578 FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n");
1580 pl = fc_frame_payload_get(fp, sizeof(*pl));
1581 if (!pl) {
1582 FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n");
1583 rjt_data.reason = ELS_RJT_PROT;
1584 rjt_data.explan = ELS_EXPL_INV_LEN;
1585 goto reject;
1588 disc = &lport->disc;
1589 mutex_lock(&disc->disc_mutex);
1590 rdata = lport->tt.rport_create(lport, sid);
1591 if (!rdata) {
1592 mutex_unlock(&disc->disc_mutex);
1593 rjt_data.reason = ELS_RJT_UNAB;
1594 rjt_data.explan = ELS_EXPL_INSUF_RES;
1595 goto reject;
1598 mutex_lock(&rdata->rp_mutex);
1599 mutex_unlock(&disc->disc_mutex);
1601 rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn);
1602 rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn);
1605 * If the rport was just created, possibly due to the incoming PLOGI,
1606 * set the state appropriately and accept the PLOGI.
1608 * If we had also sent a PLOGI, and if the received PLOGI is from a
1609 * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason
1610 * "command already in progress".
1612 * XXX TBD: If the session was ready before, the PLOGI should result in
1613 * all outstanding exchanges being reset.
1615 switch (rdata->rp_state) {
1616 case RPORT_ST_INIT:
1617 FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n");
1618 break;
1619 case RPORT_ST_PLOGI_WAIT:
1620 FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI_WAIT state\n");
1621 break;
1622 case RPORT_ST_PLOGI:
1623 FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n");
1624 if (rdata->ids.port_name < lport->wwpn) {
1625 mutex_unlock(&rdata->rp_mutex);
1626 rjt_data.reason = ELS_RJT_INPROG;
1627 rjt_data.explan = ELS_EXPL_NONE;
1628 goto reject;
1630 break;
1631 case RPORT_ST_PRLI:
1632 case RPORT_ST_RTV:
1633 case RPORT_ST_READY:
1634 case RPORT_ST_ADISC:
1635 FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
1636 "- ignored for now\n", rdata->rp_state);
1637 /* XXX TBD - should reset */
1638 break;
1639 case RPORT_ST_FLOGI:
1640 case RPORT_ST_DELETE:
1641 FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n",
1642 fc_rport_state(rdata));
1643 mutex_unlock(&rdata->rp_mutex);
1644 rjt_data.reason = ELS_RJT_BUSY;
1645 rjt_data.explan = ELS_EXPL_NONE;
1646 goto reject;
1650 * Get session payload size from incoming PLOGI.
1652 rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs);
1655 * Send LS_ACC. If this fails, the originator should retry.
1657 fp = fc_frame_alloc(lport, sizeof(*pl));
1658 if (!fp)
1659 goto out;
1661 fc_plogi_fill(lport, fp, ELS_LS_ACC);
1662 fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1663 lport->tt.frame_send(lport, fp);
1664 fc_rport_enter_prli(rdata);
1665 out:
1666 mutex_unlock(&rdata->rp_mutex);
1667 fc_frame_free(rx_fp);
1668 return;
1670 reject:
1671 lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &rjt_data);
1672 fc_frame_free(fp);
1676 * fc_rport_recv_prli_req() - Handler for process login (PRLI) requests
1677 * @rdata: The remote port that sent the PRLI request
1678 * @rx_fp: The PRLI request frame
1680 * Locking Note: The rport lock is exected to be held before calling
1681 * this function.
1683 static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
1684 struct fc_frame *rx_fp)
1686 struct fc_lport *lport = rdata->local_port;
1687 struct fc_frame *fp;
1688 struct {
1689 struct fc_els_prli prli;
1690 struct fc_els_spp spp;
1691 } *pp;
1692 struct fc_els_spp *rspp; /* request service param page */
1693 struct fc_els_spp *spp; /* response spp */
1694 unsigned int len;
1695 unsigned int plen;
1696 enum fc_els_spp_resp resp;
1697 enum fc_els_spp_resp passive;
1698 struct fc_seq_els_data rjt_data;
1699 struct fc4_prov *prov;
1701 FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
1702 fc_rport_state(rdata));
1704 len = fr_len(rx_fp) - sizeof(struct fc_frame_header);
1705 pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
1706 if (!pp)
1707 goto reject_len;
1708 plen = ntohs(pp->prli.prli_len);
1709 if ((plen % 4) != 0 || plen > len || plen < 16)
1710 goto reject_len;
1711 if (plen < len)
1712 len = plen;
1713 plen = pp->prli.prli_spp_len;
1714 if ((plen % 4) != 0 || plen < sizeof(*spp) ||
1715 plen > len || len < sizeof(*pp) || plen < 12)
1716 goto reject_len;
1717 rspp = &pp->spp;
1719 fp = fc_frame_alloc(lport, len);
1720 if (!fp) {
1721 rjt_data.reason = ELS_RJT_UNAB;
1722 rjt_data.explan = ELS_EXPL_INSUF_RES;
1723 goto reject;
1725 pp = fc_frame_payload_get(fp, len);
1726 WARN_ON(!pp);
1727 memset(pp, 0, len);
1728 pp->prli.prli_cmd = ELS_LS_ACC;
1729 pp->prli.prli_spp_len = plen;
1730 pp->prli.prli_len = htons(len);
1731 len -= sizeof(struct fc_els_prli);
1734 * Go through all the service parameter pages and build
1735 * response. If plen indicates longer SPP than standard,
1736 * use that. The entire response has been pre-cleared above.
1738 spp = &pp->spp;
1739 mutex_lock(&fc_prov_mutex);
1740 while (len >= plen) {
1741 rdata->spp_type = rspp->spp_type;
1742 spp->spp_type = rspp->spp_type;
1743 spp->spp_type_ext = rspp->spp_type_ext;
1744 resp = 0;
1746 if (rspp->spp_type < FC_FC4_PROV_SIZE) {
1747 prov = fc_active_prov[rspp->spp_type];
1748 if (prov)
1749 resp = prov->prli(rdata, plen, rspp, spp);
1750 prov = fc_passive_prov[rspp->spp_type];
1751 if (prov) {
1752 passive = prov->prli(rdata, plen, rspp, spp);
1753 if (!resp || passive == FC_SPP_RESP_ACK)
1754 resp = passive;
1757 if (!resp) {
1758 if (spp->spp_flags & FC_SPP_EST_IMG_PAIR)
1759 resp |= FC_SPP_RESP_CONF;
1760 else
1761 resp |= FC_SPP_RESP_INVL;
1763 spp->spp_flags |= resp;
1764 len -= plen;
1765 rspp = (struct fc_els_spp *)((char *)rspp + plen);
1766 spp = (struct fc_els_spp *)((char *)spp + plen);
1768 mutex_unlock(&fc_prov_mutex);
1771 * Send LS_ACC. If this fails, the originator should retry.
1773 fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1774 lport->tt.frame_send(lport, fp);
1776 switch (rdata->rp_state) {
1777 case RPORT_ST_PRLI:
1778 fc_rport_enter_ready(rdata);
1779 break;
1780 default:
1781 break;
1783 goto drop;
1785 reject_len:
1786 rjt_data.reason = ELS_RJT_PROT;
1787 rjt_data.explan = ELS_EXPL_INV_LEN;
1788 reject:
1789 lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1790 drop:
1791 fc_frame_free(rx_fp);
1795 * fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests
1796 * @rdata: The remote port that sent the PRLO request
1797 * @rx_fp: The PRLO request frame
1799 * Locking Note: The rport lock is exected to be held before calling
1800 * this function.
1802 static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata,
1803 struct fc_frame *rx_fp)
1805 struct fc_lport *lport = rdata->local_port;
1806 struct fc_frame *fp;
1807 struct {
1808 struct fc_els_prlo prlo;
1809 struct fc_els_spp spp;
1810 } *pp;
1811 struct fc_els_spp *rspp; /* request service param page */
1812 struct fc_els_spp *spp; /* response spp */
1813 unsigned int len;
1814 unsigned int plen;
1815 struct fc_seq_els_data rjt_data;
1817 FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n",
1818 fc_rport_state(rdata));
1820 len = fr_len(rx_fp) - sizeof(struct fc_frame_header);
1821 pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
1822 if (!pp)
1823 goto reject_len;
1824 plen = ntohs(pp->prlo.prlo_len);
1825 if (plen != 20)
1826 goto reject_len;
1827 if (plen < len)
1828 len = plen;
1830 rspp = &pp->spp;
1832 fp = fc_frame_alloc(lport, len);
1833 if (!fp) {
1834 rjt_data.reason = ELS_RJT_UNAB;
1835 rjt_data.explan = ELS_EXPL_INSUF_RES;
1836 goto reject;
1839 pp = fc_frame_payload_get(fp, len);
1840 WARN_ON(!pp);
1841 memset(pp, 0, len);
1842 pp->prlo.prlo_cmd = ELS_LS_ACC;
1843 pp->prlo.prlo_obs = 0x10;
1844 pp->prlo.prlo_len = htons(len);
1845 spp = &pp->spp;
1846 spp->spp_type = rspp->spp_type;
1847 spp->spp_type_ext = rspp->spp_type_ext;
1848 spp->spp_flags = FC_SPP_RESP_ACK;
1850 fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
1852 fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1853 lport->tt.frame_send(lport, fp);
1854 goto drop;
1856 reject_len:
1857 rjt_data.reason = ELS_RJT_PROT;
1858 rjt_data.explan = ELS_EXPL_INV_LEN;
1859 reject:
1860 lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1861 drop:
1862 fc_frame_free(rx_fp);
1866 * fc_rport_recv_logo_req() - Handler for logout (LOGO) requests
1867 * @lport: The local port that received the LOGO request
1868 * @fp: The LOGO request frame
1870 * Locking Note: The rport lock is exected to be held before calling
1871 * this function.
1873 static void fc_rport_recv_logo_req(struct fc_lport *lport, struct fc_frame *fp)
1875 struct fc_rport_priv *rdata;
1876 u32 sid;
1878 lport->tt.seq_els_rsp_send(fp, ELS_LS_ACC, NULL);
1880 sid = fc_frame_sid(fp);
1882 mutex_lock(&lport->disc.disc_mutex);
1883 rdata = lport->tt.rport_lookup(lport, sid);
1884 if (rdata) {
1885 mutex_lock(&rdata->rp_mutex);
1886 FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n",
1887 fc_rport_state(rdata));
1889 fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
1890 mutex_unlock(&rdata->rp_mutex);
1891 } else
1892 FC_RPORT_ID_DBG(lport, sid,
1893 "Received LOGO from non-logged-in port\n");
1894 mutex_unlock(&lport->disc.disc_mutex);
1895 fc_frame_free(fp);
1899 * fc_rport_flush_queue() - Flush the rport_event_queue
1901 static void fc_rport_flush_queue(void)
1903 flush_workqueue(rport_event_queue);
1907 * fc_rport_init() - Initialize the remote port layer for a local port
1908 * @lport: The local port to initialize the remote port layer for
1910 int fc_rport_init(struct fc_lport *lport)
1912 if (!lport->tt.rport_lookup)
1913 lport->tt.rport_lookup = fc_rport_lookup;
1915 if (!lport->tt.rport_create)
1916 lport->tt.rport_create = fc_rport_create;
1918 if (!lport->tt.rport_login)
1919 lport->tt.rport_login = fc_rport_login;
1921 if (!lport->tt.rport_logoff)
1922 lport->tt.rport_logoff = fc_rport_logoff;
1924 if (!lport->tt.rport_recv_req)
1925 lport->tt.rport_recv_req = fc_rport_recv_req;
1927 if (!lport->tt.rport_flush_queue)
1928 lport->tt.rport_flush_queue = fc_rport_flush_queue;
1930 if (!lport->tt.rport_destroy)
1931 lport->tt.rport_destroy = fc_rport_destroy;
1933 return 0;
1935 EXPORT_SYMBOL(fc_rport_init);
1938 * fc_rport_fcp_prli() - Handle incoming PRLI for the FCP initiator.
1939 * @rdata: remote port private
1940 * @spp_len: service parameter page length
1941 * @rspp: received service parameter page
1942 * @spp: response service parameter page
1944 * Returns the value for the response code to be placed in spp_flags;
1945 * Returns 0 if not an initiator.
1947 static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len,
1948 const struct fc_els_spp *rspp,
1949 struct fc_els_spp *spp)
1951 struct fc_lport *lport = rdata->local_port;
1952 u32 fcp_parm;
1954 fcp_parm = ntohl(rspp->spp_params);
1955 rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
1956 if (fcp_parm & FCP_SPPF_INIT_FCN)
1957 rdata->ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
1958 if (fcp_parm & FCP_SPPF_TARG_FCN)
1959 rdata->ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
1960 if (fcp_parm & FCP_SPPF_RETRY)
1961 rdata->flags |= FC_RP_FLAGS_RETRY;
1962 rdata->supported_classes = FC_COS_CLASS3;
1964 if (!(lport->service_params & FC_RPORT_ROLE_FCP_INITIATOR))
1965 return 0;
1967 spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
1970 * OR in our service parameters with other providers (target), if any.
1972 fcp_parm = ntohl(spp->spp_params);
1973 spp->spp_params = htonl(fcp_parm | lport->service_params);
1974 return FC_SPP_RESP_ACK;
1978 * FC-4 provider ops for FCP initiator.
1980 struct fc4_prov fc_rport_fcp_init = {
1981 .prli = fc_rport_fcp_prli,
1985 * fc_rport_t0_prli() - Handle incoming PRLI parameters for type 0
1986 * @rdata: remote port private
1987 * @spp_len: service parameter page length
1988 * @rspp: received service parameter page
1989 * @spp: response service parameter page
1991 static int fc_rport_t0_prli(struct fc_rport_priv *rdata, u32 spp_len,
1992 const struct fc_els_spp *rspp,
1993 struct fc_els_spp *spp)
1995 if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR)
1996 return FC_SPP_RESP_INVL;
1997 return FC_SPP_RESP_ACK;
2001 * FC-4 provider ops for type 0 service parameters.
2003 * This handles the special case of type 0 which is always successful
2004 * but doesn't do anything otherwise.
2006 struct fc4_prov fc_rport_t0_prov = {
2007 .prli = fc_rport_t0_prli,
2011 * fc_setup_rport() - Initialize the rport_event_queue
2013 int fc_setup_rport(void)
2015 rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
2016 if (!rport_event_queue)
2017 return -ENOMEM;
2018 return 0;
2022 * fc_destroy_rport() - Destroy the rport_event_queue
2024 void fc_destroy_rport(void)
2026 destroy_workqueue(rport_event_queue);
2030 * fc_rport_terminate_io() - Stop all outstanding I/O on a remote port
2031 * @rport: The remote port whose I/O should be terminated
2033 void fc_rport_terminate_io(struct fc_rport *rport)
2035 struct fc_rport_libfc_priv *rpriv = rport->dd_data;
2036 struct fc_lport *lport = rpriv->local_port;
2038 lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
2039 lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
2041 EXPORT_SYMBOL(fc_rport_terminate_io);