MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
[linux-2.6/linux-mips.git] / drivers / spi / spi-omap-100k.c
blob9bd1c92ad96e89abe988dea3def8b37944643e30
1 /*
2 * OMAP7xx SPI 100k controller driver
3 * Author: Fabrice Crohas <fcrohas@gmail.com>
4 * from original omap1_mcspi driver
6 * Copyright (C) 2005, 2006 Nokia Corporation
7 * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
8 * Juha Yrj�l� <juha.yrjola@nokia.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 #include <linux/kernel.h>
26 #include <linux/init.h>
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/device.h>
30 #include <linux/delay.h>
31 #include <linux/platform_device.h>
32 #include <linux/err.h>
33 #include <linux/clk.h>
34 #include <linux/io.h>
35 #include <linux/gpio.h>
36 #include <linux/slab.h>
38 #include <linux/spi/spi.h>
40 #include <plat/clock.h>
42 #define OMAP1_SPI100K_MAX_FREQ 48000000
44 #define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
46 #define SPI_SETUP1 0x00
47 #define SPI_SETUP2 0x02
48 #define SPI_CTRL 0x04
49 #define SPI_STATUS 0x06
50 #define SPI_TX_LSB 0x08
51 #define SPI_TX_MSB 0x0a
52 #define SPI_RX_LSB 0x0c
53 #define SPI_RX_MSB 0x0e
55 #define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
56 #define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
57 #define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
58 #define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
60 #define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
61 #define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
62 #define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
63 #define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
64 #define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
65 #define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
67 #define SPI_CTRL_SEN(x) ((x) << 7)
68 #define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
69 #define SPI_CTRL_WR (1UL << 1)
70 #define SPI_CTRL_RD (1UL << 0)
72 #define SPI_STATUS_WE (1UL << 1)
73 #define SPI_STATUS_RD (1UL << 0)
75 #define WRITE 0
76 #define READ 1
79 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
80 * cache operations; better heuristics consider wordsize and bitrate.
82 #define DMA_MIN_BYTES 8
84 #define SPI_RUNNING 0
85 #define SPI_SHUTDOWN 1
87 struct omap1_spi100k {
88 struct work_struct work;
90 /* lock protects queue and registers */
91 spinlock_t lock;
92 struct list_head msg_queue;
93 struct spi_master *master;
94 struct clk *ick;
95 struct clk *fck;
97 /* Virtual base address of the controller */
98 void __iomem *base;
100 /* State of the SPI */
101 unsigned int state;
104 struct omap1_spi100k_cs {
105 void __iomem *base;
106 int word_len;
109 static struct workqueue_struct *omap1_spi100k_wq;
111 #define MOD_REG_BIT(val, mask, set) do { \
112 if (set) \
113 val |= mask; \
114 else \
115 val &= ~mask; \
116 } while (0)
118 static void spi100k_enable_clock(struct spi_master *master)
120 unsigned int val;
121 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
123 /* enable SPI */
124 val = readw(spi100k->base + SPI_SETUP1);
125 val |= SPI_SETUP1_CLOCK_ENABLE;
126 writew(val, spi100k->base + SPI_SETUP1);
129 static void spi100k_disable_clock(struct spi_master *master)
131 unsigned int val;
132 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
134 /* disable SPI */
135 val = readw(spi100k->base + SPI_SETUP1);
136 val &= ~SPI_SETUP1_CLOCK_ENABLE;
137 writew(val, spi100k->base + SPI_SETUP1);
140 static void spi100k_write_data(struct spi_master *master, int len, int data)
142 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
144 /* write 16-bit word, shifting 8-bit data if necessary */
145 if (len <= 8) {
146 data <<= 8;
147 len = 16;
150 spi100k_enable_clock(master);
151 writew( data , spi100k->base + SPI_TX_MSB);
153 writew(SPI_CTRL_SEN(0) |
154 SPI_CTRL_WORD_SIZE(len) |
155 SPI_CTRL_WR,
156 spi100k->base + SPI_CTRL);
158 /* Wait for bit ack send change */
159 while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE);
160 udelay(1000);
162 spi100k_disable_clock(master);
165 static int spi100k_read_data(struct spi_master *master, int len)
167 int dataH,dataL;
168 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
170 /* Always do at least 16 bits */
171 if (len <= 8)
172 len = 16;
174 spi100k_enable_clock(master);
175 writew(SPI_CTRL_SEN(0) |
176 SPI_CTRL_WORD_SIZE(len) |
177 SPI_CTRL_RD,
178 spi100k->base + SPI_CTRL);
180 while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD);
181 udelay(1000);
183 dataL = readw(spi100k->base + SPI_RX_LSB);
184 dataH = readw(spi100k->base + SPI_RX_MSB);
185 spi100k_disable_clock(master);
187 return dataL;
190 static void spi100k_open(struct spi_master *master)
192 /* get control of SPI */
193 struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
195 writew(SPI_SETUP1_INT_READ_ENABLE |
196 SPI_SETUP1_INT_WRITE_ENABLE |
197 SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1);
199 /* configure clock and interrupts */
200 writew(SPI_SETUP2_ACTIVE_EDGE_FALLING |
201 SPI_SETUP2_NEGATIVE_LEVEL |
202 SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2);
205 static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
207 if (enable)
208 writew(0x05fc, spi100k->base + SPI_CTRL);
209 else
210 writew(0x05fd, spi100k->base + SPI_CTRL);
213 static unsigned
214 omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
216 struct omap1_spi100k *spi100k;
217 struct omap1_spi100k_cs *cs = spi->controller_state;
218 unsigned int count, c;
219 int word_len;
221 spi100k = spi_master_get_devdata(spi->master);
222 count = xfer->len;
223 c = count;
224 word_len = cs->word_len;
226 if (word_len <= 8) {
227 u8 *rx;
228 const u8 *tx;
230 rx = xfer->rx_buf;
231 tx = xfer->tx_buf;
232 do {
233 c-=1;
234 if (xfer->tx_buf != NULL)
235 spi100k_write_data(spi->master, word_len, *tx++);
236 if (xfer->rx_buf != NULL)
237 *rx++ = spi100k_read_data(spi->master, word_len);
238 } while(c);
239 } else if (word_len <= 16) {
240 u16 *rx;
241 const u16 *tx;
243 rx = xfer->rx_buf;
244 tx = xfer->tx_buf;
245 do {
246 c-=2;
247 if (xfer->tx_buf != NULL)
248 spi100k_write_data(spi->master,word_len, *tx++);
249 if (xfer->rx_buf != NULL)
250 *rx++ = spi100k_read_data(spi->master,word_len);
251 } while(c);
252 } else if (word_len <= 32) {
253 u32 *rx;
254 const u32 *tx;
256 rx = xfer->rx_buf;
257 tx = xfer->tx_buf;
258 do {
259 c-=4;
260 if (xfer->tx_buf != NULL)
261 spi100k_write_data(spi->master,word_len, *tx);
262 if (xfer->rx_buf != NULL)
263 *rx = spi100k_read_data(spi->master,word_len);
264 } while(c);
266 return count - c;
269 /* called only when no transfer is active to this device */
270 static int omap1_spi100k_setup_transfer(struct spi_device *spi,
271 struct spi_transfer *t)
273 struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master);
274 struct omap1_spi100k_cs *cs = spi->controller_state;
275 u8 word_len = spi->bits_per_word;
277 if (t != NULL && t->bits_per_word)
278 word_len = t->bits_per_word;
279 if (!word_len)
280 word_len = 8;
282 if (spi->bits_per_word > 32)
283 return -EINVAL;
284 cs->word_len = word_len;
286 /* SPI init before transfer */
287 writew(0x3e , spi100k->base + SPI_SETUP1);
288 writew(0x00 , spi100k->base + SPI_STATUS);
289 writew(0x3e , spi100k->base + SPI_CTRL);
291 return 0;
294 /* the spi->mode bits understood by this driver: */
295 #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
297 static int omap1_spi100k_setup(struct spi_device *spi)
299 int ret;
300 struct omap1_spi100k *spi100k;
301 struct omap1_spi100k_cs *cs = spi->controller_state;
303 if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
304 dev_dbg(&spi->dev, "setup: unsupported %d bit words\n",
305 spi->bits_per_word);
306 return -EINVAL;
309 spi100k = spi_master_get_devdata(spi->master);
311 if (!cs) {
312 cs = kzalloc(sizeof *cs, GFP_KERNEL);
313 if (!cs)
314 return -ENOMEM;
315 cs->base = spi100k->base + spi->chip_select * 0x14;
316 spi->controller_state = cs;
319 spi100k_open(spi->master);
321 clk_enable(spi100k->ick);
322 clk_enable(spi100k->fck);
324 ret = omap1_spi100k_setup_transfer(spi, NULL);
326 clk_disable(spi100k->ick);
327 clk_disable(spi100k->fck);
329 return ret;
332 static void omap1_spi100k_work(struct work_struct *work)
334 struct omap1_spi100k *spi100k;
335 int status = 0;
337 spi100k = container_of(work, struct omap1_spi100k, work);
338 spin_lock_irq(&spi100k->lock);
340 clk_enable(spi100k->ick);
341 clk_enable(spi100k->fck);
343 /* We only enable one channel at a time -- the one whose message is
344 * at the head of the queue -- although this controller would gladly
345 * arbitrate among multiple channels. This corresponds to "single
346 * channel" master mode. As a side effect, we need to manage the
347 * chipselect with the FORCE bit ... CS != channel enable.
349 while (!list_empty(&spi100k->msg_queue)) {
350 struct spi_message *m;
351 struct spi_device *spi;
352 struct spi_transfer *t = NULL;
353 int cs_active = 0;
354 struct omap1_spi100k_cs *cs;
355 int par_override = 0;
357 m = container_of(spi100k->msg_queue.next, struct spi_message,
358 queue);
360 list_del_init(&m->queue);
361 spin_unlock_irq(&spi100k->lock);
363 spi = m->spi;
364 cs = spi->controller_state;
366 list_for_each_entry(t, &m->transfers, transfer_list) {
367 if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
368 status = -EINVAL;
369 break;
371 if (par_override || t->speed_hz || t->bits_per_word) {
372 par_override = 1;
373 status = omap1_spi100k_setup_transfer(spi, t);
374 if (status < 0)
375 break;
376 if (!t->speed_hz && !t->bits_per_word)
377 par_override = 0;
380 if (!cs_active) {
381 omap1_spi100k_force_cs(spi100k, 1);
382 cs_active = 1;
385 if (t->len) {
386 unsigned count;
388 count = omap1_spi100k_txrx_pio(spi, t);
389 m->actual_length += count;
391 if (count != t->len) {
392 status = -EIO;
393 break;
397 if (t->delay_usecs)
398 udelay(t->delay_usecs);
400 /* ignore the "leave it on after last xfer" hint */
402 if (t->cs_change) {
403 omap1_spi100k_force_cs(spi100k, 0);
404 cs_active = 0;
408 /* Restore defaults if they were overriden */
409 if (par_override) {
410 par_override = 0;
411 status = omap1_spi100k_setup_transfer(spi, NULL);
414 if (cs_active)
415 omap1_spi100k_force_cs(spi100k, 0);
417 m->status = status;
418 m->complete(m->context);
420 spin_lock_irq(&spi100k->lock);
423 clk_disable(spi100k->ick);
424 clk_disable(spi100k->fck);
425 spin_unlock_irq(&spi100k->lock);
427 if (status < 0)
428 printk(KERN_WARNING "spi transfer failed with %d\n", status);
431 static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m)
433 struct omap1_spi100k *spi100k;
434 unsigned long flags;
435 struct spi_transfer *t;
437 m->actual_length = 0;
438 m->status = -EINPROGRESS;
440 spi100k = spi_master_get_devdata(spi->master);
442 /* Don't accept new work if we're shutting down */
443 if (spi100k->state == SPI_SHUTDOWN)
444 return -ESHUTDOWN;
446 /* reject invalid messages and transfers */
447 if (list_empty(&m->transfers) || !m->complete)
448 return -EINVAL;
450 list_for_each_entry(t, &m->transfers, transfer_list) {
451 const void *tx_buf = t->tx_buf;
452 void *rx_buf = t->rx_buf;
453 unsigned len = t->len;
455 if (t->speed_hz > OMAP1_SPI100K_MAX_FREQ
456 || (len && !(rx_buf || tx_buf))
457 || (t->bits_per_word &&
458 ( t->bits_per_word < 4
459 || t->bits_per_word > 32))) {
460 dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
461 t->speed_hz,
462 len,
463 tx_buf ? "tx" : "",
464 rx_buf ? "rx" : "",
465 t->bits_per_word);
466 return -EINVAL;
469 if (t->speed_hz && t->speed_hz < OMAP1_SPI100K_MAX_FREQ/(1<<16)) {
470 dev_dbg(&spi->dev, "%d Hz max exceeds %d\n",
471 t->speed_hz,
472 OMAP1_SPI100K_MAX_FREQ/(1<<16));
473 return -EINVAL;
478 spin_lock_irqsave(&spi100k->lock, flags);
479 list_add_tail(&m->queue, &spi100k->msg_queue);
480 queue_work(omap1_spi100k_wq, &spi100k->work);
481 spin_unlock_irqrestore(&spi100k->lock, flags);
483 return 0;
486 static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k)
488 return 0;
491 static int __devinit omap1_spi100k_probe(struct platform_device *pdev)
493 struct spi_master *master;
494 struct omap1_spi100k *spi100k;
495 int status = 0;
497 if (!pdev->id)
498 return -EINVAL;
500 master = spi_alloc_master(&pdev->dev, sizeof *spi100k);
501 if (master == NULL) {
502 dev_dbg(&pdev->dev, "master allocation failed\n");
503 return -ENOMEM;
506 if (pdev->id != -1)
507 master->bus_num = pdev->id;
509 master->setup = omap1_spi100k_setup;
510 master->transfer = omap1_spi100k_transfer;
511 master->cleanup = NULL;
512 master->num_chipselect = 2;
513 master->mode_bits = MODEBITS;
515 dev_set_drvdata(&pdev->dev, master);
517 spi100k = spi_master_get_devdata(master);
518 spi100k->master = master;
521 * The memory region base address is taken as the platform_data.
522 * You should allocate this with ioremap() before initializing
523 * the SPI.
525 spi100k->base = (void __iomem *) pdev->dev.platform_data;
527 INIT_WORK(&spi100k->work, omap1_spi100k_work);
529 spin_lock_init(&spi100k->lock);
530 INIT_LIST_HEAD(&spi100k->msg_queue);
531 spi100k->ick = clk_get(&pdev->dev, "ick");
532 if (IS_ERR(spi100k->ick)) {
533 dev_dbg(&pdev->dev, "can't get spi100k_ick\n");
534 status = PTR_ERR(spi100k->ick);
535 goto err1;
538 spi100k->fck = clk_get(&pdev->dev, "fck");
539 if (IS_ERR(spi100k->fck)) {
540 dev_dbg(&pdev->dev, "can't get spi100k_fck\n");
541 status = PTR_ERR(spi100k->fck);
542 goto err2;
545 if (omap1_spi100k_reset(spi100k) < 0)
546 goto err3;
548 status = spi_register_master(master);
549 if (status < 0)
550 goto err3;
552 spi100k->state = SPI_RUNNING;
554 return status;
556 err3:
557 clk_put(spi100k->fck);
558 err2:
559 clk_put(spi100k->ick);
560 err1:
561 spi_master_put(master);
562 return status;
565 static int __exit omap1_spi100k_remove(struct platform_device *pdev)
567 struct spi_master *master;
568 struct omap1_spi100k *spi100k;
569 struct resource *r;
570 unsigned limit = 500;
571 unsigned long flags;
572 int status = 0;
574 master = dev_get_drvdata(&pdev->dev);
575 spi100k = spi_master_get_devdata(master);
577 spin_lock_irqsave(&spi100k->lock, flags);
579 spi100k->state = SPI_SHUTDOWN;
580 while (!list_empty(&spi100k->msg_queue) && limit--) {
581 spin_unlock_irqrestore(&spi100k->lock, flags);
582 msleep(10);
583 spin_lock_irqsave(&spi100k->lock, flags);
586 if (!list_empty(&spi100k->msg_queue))
587 status = -EBUSY;
589 spin_unlock_irqrestore(&spi100k->lock, flags);
591 if (status != 0)
592 return status;
594 clk_put(spi100k->fck);
595 clk_put(spi100k->ick);
597 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
599 spi_unregister_master(master);
601 return 0;
604 static struct platform_driver omap1_spi100k_driver = {
605 .driver = {
606 .name = "omap1_spi100k",
607 .owner = THIS_MODULE,
609 .remove = __exit_p(omap1_spi100k_remove),
613 static int __init omap1_spi100k_init(void)
615 omap1_spi100k_wq = create_singlethread_workqueue(
616 omap1_spi100k_driver.driver.name);
618 if (omap1_spi100k_wq == NULL)
619 return -1;
621 return platform_driver_probe(&omap1_spi100k_driver, omap1_spi100k_probe);
624 static void __exit omap1_spi100k_exit(void)
626 platform_driver_unregister(&omap1_spi100k_driver);
628 destroy_workqueue(omap1_spi100k_wq);
631 module_init(omap1_spi100k_init);
632 module_exit(omap1_spi100k_exit);
634 MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
635 MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
636 MODULE_LICENSE("GPL");