drivers/tty/rocket.c

   1 /*
   2  * RocketPort device driver for Linux
   3  *
   4  * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
   5  *
   6  * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of the
  11  * License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 /*
  24  * Kernel Synchronization:
  25  *
  26  * This driver has 2 kernel control paths - exception handlers (calls into the driver
  27  * from user mode) and the timer bottom half (tasklet).  This is a polled driver, interrupts
  28  * are not used.
  29  *
  30  * Critical data:
  31  * -  rp_table[], accessed through passed "info" pointers, is a global (static) array of
  32  *    serial port state information and the xmit_buf circular buffer.  Protected by
  33  *    a per port spinlock.
  34  * -  xmit_flags[], an array of ints indexed by line (port) number, indicating that there
  35  *    is data to be transmitted.  Protected by atomic bit operations.
  36  * -  rp_num_ports, int indicating number of open ports, protected by atomic operations.
  37  *
  38  * rp_write() and rp_write_char() functions use a per port semaphore to protect against
  39  * simultaneous access to the same port by more than one process.
  40  */
  41
  42 /****** Defines ******/
  43 #define ROCKET_PARANOIA_CHECK
  44 #define ROCKET_DISABLE_SIMUSAGE
  45
  46 #undef ROCKET_SOFT_FLOW
  47 #undef ROCKET_DEBUG_OPEN
  48 #undef ROCKET_DEBUG_INTR
  49 #undef ROCKET_DEBUG_WRITE
  50 #undef ROCKET_DEBUG_FLOW
  51 #undef ROCKET_DEBUG_THROTTLE
  52 #undef ROCKET_DEBUG_WAIT_UNTIL_SENT
  53 #undef ROCKET_DEBUG_RECEIVE
  54 #undef ROCKET_DEBUG_HANGUP
  55 #undef REV_PCI_ORDER
  56 #undef ROCKET_DEBUG_IO
  57
  58 #define POLL_PERIOD HZ/100      /*  Polling period .01 seconds (10ms) */
  59
  60 /****** Kernel includes ******/
  61
  62 #include <linux/module.h>
  63 #include <linux/errno.h>
  64 #include <linux/major.h>
  65 #include <linux/kernel.h>
  66 #include <linux/signal.h>
  67 #include <linux/slab.h>
  68 #include <linux/mm.h>
  69 #include <linux/sched.h>
  70 #include <linux/timer.h>
  71 #include <linux/interrupt.h>
  72 #include <linux/tty.h>
  73 #include <linux/tty_driver.h>
  74 #include <linux/tty_flip.h>
  75 #include <linux/serial.h>
  76 #include <linux/string.h>
  77 #include <linux/fcntl.h>
  78 #include <linux/ptrace.h>
  79 #include <linux/mutex.h>
  80 #include <linux/ioport.h>
  81 #include <linux/delay.h>
  82 #include <linux/completion.h>
  83 #include <linux/wait.h>
  84 #include <linux/pci.h>
  85 #include <linux/uaccess.h>
  86 #include <asm/atomic.h>
  87 #include <asm/unaligned.h>
  88 #include <linux/bitops.h>
  89 #include <linux/spinlock.h>
  90 #include <linux/init.h>
  91
  92 /****** RocketPort includes ******/
  93
  94 #include "rocket_int.h"
  95 #include "rocket.h"
  96
  97 #define ROCKET_VERSION "2.09"
  98 #define ROCKET_DATE "12-June-2003"
  99
 100 /****** RocketPort Local Variables ******/
 101
 102 static void rp_do_poll(unsigned long dummy);
 103
 104 static struct tty_driver *rocket_driver;
 105
 106 static struct rocket_version driver_version = {
 107         ROCKET_VERSION, ROCKET_DATE
 108 };
 109
 110 static struct r_port *rp_table[MAX_RP_PORTS];          /*  The main repository of serial port state information. */
 111 static unsigned int xmit_flags[NUM_BOARDS];            /*  Bit significant, indicates port had data to transmit. */
 112                                                        /*  eg.  Bit 0 indicates port 0 has xmit data, ...        */
 113 static atomic_t rp_num_ports_open;                     /*  Number of serial ports open                           */
 114 static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0);
 115
 116 static unsigned long board1;                           /* ISA addresses, retrieved from rocketport.conf          */
 117 static unsigned long board2;
 118 static unsigned long board3;
 119 static unsigned long board4;
 120 static unsigned long controller;
 121 static int support_low_speed;
 122 static unsigned long modem1;
 123 static unsigned long modem2;
 124 static unsigned long modem3;
 125 static unsigned long modem4;
 126 static unsigned long pc104_1[8];
 127 static unsigned long pc104_2[8];
 128 static unsigned long pc104_3[8];
 129 static unsigned long pc104_4[8];
 130 static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
 131
 132 static int rp_baud_base[NUM_BOARDS];                   /*  Board config info (Someday make a per-board structure)  */
 133 static unsigned long rcktpt_io_addr[NUM_BOARDS];
 134 static int rcktpt_type[NUM_BOARDS];
 135 static int is_PCI[NUM_BOARDS];
 136 static rocketModel_t rocketModel[NUM_BOARDS];
 137 static int max_board;
 138 static const struct tty_port_operations rocket_port_ops;
 139
 140 /*
 141  * The following arrays define the interrupt bits corresponding to each AIOP.
 142  * These bits are different between the ISA and regular PCI boards and the
 143  * Universal PCI boards.
 144  */
 145
 146 static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
 147         AIOP_INTR_BIT_0,
 148         AIOP_INTR_BIT_1,
 149         AIOP_INTR_BIT_2,
 150         AIOP_INTR_BIT_3
 151 };
 152
 153 static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
 154         UPCI_AIOP_INTR_BIT_0,
 155         UPCI_AIOP_INTR_BIT_1,
 156         UPCI_AIOP_INTR_BIT_2,
 157         UPCI_AIOP_INTR_BIT_3
 158 };
 159
 160 static Byte_t RData[RDATASIZE] = {
 161         0x00, 0x09, 0xf6, 0x82,
 162         0x02, 0x09, 0x86, 0xfb,
 163         0x04, 0x09, 0x00, 0x0a,
 164         0x06, 0x09, 0x01, 0x0a,
 165         0x08, 0x09, 0x8a, 0x13,
 166         0x0a, 0x09, 0xc5, 0x11,
 167         0x0c, 0x09, 0x86, 0x85,
 168         0x0e, 0x09, 0x20, 0x0a,
 169         0x10, 0x09, 0x21, 0x0a,
 170         0x12, 0x09, 0x41, 0xff,
 171         0x14, 0x09, 0x82, 0x00,
 172         0x16, 0x09, 0x82, 0x7b,
 173         0x18, 0x09, 0x8a, 0x7d,
 174         0x1a, 0x09, 0x88, 0x81,
 175         0x1c, 0x09, 0x86, 0x7a,
 176         0x1e, 0x09, 0x84, 0x81,
 177         0x20, 0x09, 0x82, 0x7c,
 178         0x22, 0x09, 0x0a, 0x0a
 179 };
 180
 181 static Byte_t RRegData[RREGDATASIZE] = {
 182         0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
 183         0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
 184         0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
 185         0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
 186         0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
 187         0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
 188         0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
 189         0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
 190         0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
 191         0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
 192         0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
 193         0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
 194         0x22, 0x09, 0x0a, 0x0a  /* 30: Rx FIFO Enable */
 195 };
 196
 197 static CONTROLLER_T sController[CTL_SIZE] = {
 198         {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
 199          {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
 200         {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
 201          {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
 202         {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
 203          {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
 204         {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
 205          {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
 206 };
 207
 208 static Byte_t sBitMapClrTbl[8] = {
 209         0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
 210 };
 211
 212 static Byte_t sBitMapSetTbl[8] = {
 213         0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
 214 };
 215
 216 static int sClockPrescale = 0x14;
 217
 218 /*
 219  *  Line number is the ttySIx number (x), the Minor number.  We
 220  *  assign them sequentially, starting at zero.  The following
 221  *  array keeps track of the line number assigned to a given board/aiop/channel.
 222  */
 223 static unsigned char lineNumbers[MAX_RP_PORTS];
 224 static unsigned long nextLineNumber;
 225
 226 /*****  RocketPort Static Prototypes   *********/
 227 static int __init init_ISA(int i);
 228 static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
 229 static void rp_flush_buffer(struct tty_struct *tty);
 230 static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
 231 static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
 232 static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
 233 static void rp_start(struct tty_struct *tty);
 234 static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
 235                      int ChanNum);
 236 static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode);
 237 static void sFlushRxFIFO(CHANNEL_T * ChP);
 238 static void sFlushTxFIFO(CHANNEL_T * ChP);
 239 static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags);
 240 static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
 241 static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
 242 static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
 243 static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
 244 static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
 245                               ByteIO_t * AiopIOList, int AiopIOListSize,
 246                               WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
 247                               int PeriodicOnly, int altChanRingIndicator,
 248                               int UPCIRingInd);
 249 static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
 250                            ByteIO_t * AiopIOList, int AiopIOListSize,
 251                            int IRQNum, Byte_t Frequency, int PeriodicOnly);
 252 static int sReadAiopID(ByteIO_t io);
 253 static int sReadAiopNumChan(WordIO_t io);
 254
 255 MODULE_AUTHOR("Theodore Ts'o");
 256 MODULE_DESCRIPTION("Comtrol RocketPort driver");
 257 module_param(board1, ulong, 0);
 258 MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
 259 module_param(board2, ulong, 0);
 260 MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
 261 module_param(board3, ulong, 0);
 262 MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
 263 module_param(board4, ulong, 0);
 264 MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
 265 module_param(controller, ulong, 0);
 266 MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
 267 module_param(support_low_speed, bool, 0);
 268 MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
 269 module_param(modem1, ulong, 0);
 270 MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
 271 module_param(modem2, ulong, 0);
 272 MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
 273 module_param(modem3, ulong, 0);
 274 MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
 275 module_param(modem4, ulong, 0);
 276 MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
 277 module_param_array(pc104_1, ulong, NULL, 0);
 278 MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
 279 module_param_array(pc104_2, ulong, NULL, 0);
 280 MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
 281 module_param_array(pc104_3, ulong, NULL, 0);
 282 MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
 283 module_param_array(pc104_4, ulong, NULL, 0);
 284 MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
 285
 286 static int rp_init(void);
 287 static void rp_cleanup_module(void);
 288
 289 module_init(rp_init);
 290 module_exit(rp_cleanup_module);
 291
 292
 293 MODULE_LICENSE("Dual BSD/GPL");
 294
 295 /*************************************************************************/
 296 /*                     Module code starts here                           */
 297
 298 static inline int rocket_paranoia_check(struct r_port *info,
 299                                         const char *routine)
 300 {
 301 #ifdef ROCKET_PARANOIA_CHECK
 302         if (!info)
 303                 return 1;
 304         if (info->magic != RPORT_MAGIC) {
 305                 printk(KERN_WARNING "Warning: bad magic number for rocketport "
 306                                 "struct in %s\n", routine);
 307                 return 1;
 308         }
 309 #endif
 310         return 0;
 311 }
 312
 313
 314 /*  Serial port receive data function.  Called (from timer poll) when an AIOPIC signals
 315  *  that receive data is present on a serial port.  Pulls data from FIFO, moves it into the
 316  *  tty layer.
 317  */
 318 static void rp_do_receive(struct r_port *info,
 319                           struct tty_struct *tty,
 320                           CHANNEL_t * cp, unsigned int ChanStatus)
 321 {
 322         unsigned int CharNStat;
 323         int ToRecv, wRecv, space;
 324         unsigned char *cbuf;
 325
 326         ToRecv = sGetRxCnt(cp);
 327 #ifdef ROCKET_DEBUG_INTR
 328         printk(KERN_INFO "rp_do_receive(%d)...\n", ToRecv);
 329 #endif
 330         if (ToRecv == 0)
 331                 return;
 332
 333         /*
 334          * if status indicates there are errored characters in the
 335          * FIFO, then enter status mode (a word in FIFO holds
 336          * character and status).
 337          */
 338         if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
 339                 if (!(ChanStatus & STATMODE)) {
 340 #ifdef ROCKET_DEBUG_RECEIVE
 341                         printk(KERN_INFO "Entering STATMODE...\n");
 342 #endif
 343                         ChanStatus |= STATMODE;
 344                         sEnRxStatusMode(cp);
 345                 }
 346         }
 347
 348         /*
 349          * if we previously entered status mode, then read down the
 350          * FIFO one word at a time, pulling apart the character and
 351          * the status.  Update error counters depending on status
 352          */
 353         if (ChanStatus & STATMODE) {
 354 #ifdef ROCKET_DEBUG_RECEIVE
 355                 printk(KERN_INFO "Ignore %x, read %x...\n",
 356                         info->ignore_status_mask, info->read_status_mask);
 357 #endif
 358                 while (ToRecv) {
 359                         char flag;
 360
 361                         CharNStat = sInW(sGetTxRxDataIO(cp));
 362 #ifdef ROCKET_DEBUG_RECEIVE
 363                         printk(KERN_INFO "%x...\n", CharNStat);
 364 #endif
 365                         if (CharNStat & STMBREAKH)
 366                                 CharNStat &= ~(STMFRAMEH | STMPARITYH);
 367                         if (CharNStat & info->ignore_status_mask) {
 368                                 ToRecv--;
 369                                 continue;
 370                         }
 371                         CharNStat &= info->read_status_mask;
 372                         if (CharNStat & STMBREAKH)
 373                                 flag = TTY_BREAK;
 374                         else if (CharNStat & STMPARITYH)
 375                                 flag = TTY_PARITY;
 376                         else if (CharNStat & STMFRAMEH)
 377                                 flag = TTY_FRAME;
 378                         else if (CharNStat & STMRCVROVRH)
 379                                 flag = TTY_OVERRUN;
 380                         else
 381                                 flag = TTY_NORMAL;
 382                         tty_insert_flip_char(tty, CharNStat & 0xff, flag);
 383                         ToRecv--;
 384                 }
 385
 386                 /*
 387                  * after we've emptied the FIFO in status mode, turn
 388                  * status mode back off
 389                  */
 390                 if (sGetRxCnt(cp) == 0) {
 391 #ifdef ROCKET_DEBUG_RECEIVE
 392                         printk(KERN_INFO "Status mode off.\n");
 393 #endif
 394                         sDisRxStatusMode(cp);
 395                 }
 396         } else {
 397                 /*
 398                  * we aren't in status mode, so read down the FIFO two
 399                  * characters at time by doing repeated word IO
 400                  * transfer.
 401                  */
 402                 space = tty_prepare_flip_string(tty, &cbuf, ToRecv);
 403                 if (space < ToRecv) {
 404 #ifdef ROCKET_DEBUG_RECEIVE
 405                         printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space);
 406 #endif
 407                         if (space <= 0)
 408                                 return;
 409                         ToRecv = space;
 410                 }
 411                 wRecv = ToRecv >> 1;
 412                 if (wRecv)
 413                         sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
 414                 if (ToRecv & 1)
 415                         cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
 416         }
 417         /*  Push the data up to the tty layer */
 418         tty_flip_buffer_push(tty);
 419 }
 420
 421 /*
 422  *  Serial port transmit data function.  Called from the timer polling loop as a
 423  *  result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
 424  *  to be sent out the serial port.  Data is buffered in rp_table[line].xmit_buf, it is
 425  *  moved to the port's xmit FIFO.  *info is critical data, protected by spinlocks.
 426  */
 427 static void rp_do_transmit(struct r_port *info)
 428 {
 429         int c;
 430         CHANNEL_t *cp = &info->channel;
 431         struct tty_struct *tty;
 432         unsigned long flags;
 433
 434 #ifdef ROCKET_DEBUG_INTR
 435         printk(KERN_DEBUG "%s\n", __func__);
 436 #endif
 437         if (!info)
 438                 return;
 439         tty = tty_port_tty_get(&info->port);
 440
 441         if (tty == NULL) {
 442                 printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__);
 443                 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
 444                 return;
 445         }
 446
 447         spin_lock_irqsave(&info->slock, flags);
 448         info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
 449
 450         /*  Loop sending data to FIFO until done or FIFO full */
 451         while (1) {
 452                 if (tty->stopped || tty->hw_stopped)
 453                         break;
 454                 c = min(info->xmit_fifo_room, info->xmit_cnt);
 455                 c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
 456                 if (c <= 0 || info->xmit_fifo_room <= 0)
 457                         break;
 458                 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
 459                 if (c & 1)
 460                         sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
 461                 info->xmit_tail += c;
 462                 info->xmit_tail &= XMIT_BUF_SIZE - 1;
 463                 info->xmit_cnt -= c;
 464                 info->xmit_fifo_room -= c;
 465 #ifdef ROCKET_DEBUG_INTR
 466                 printk(KERN_INFO "tx %d chars...\n", c);
 467 #endif
 468         }
 469
 470         if (info->xmit_cnt == 0)
 471                 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
 472
 473         if (info->xmit_cnt < WAKEUP_CHARS) {
 474                 tty_wakeup(tty);
 475 #ifdef ROCKETPORT_HAVE_POLL_WAIT
 476                 wake_up_interruptible(&tty->poll_wait);
 477 #endif
 478         }
 479
 480         spin_unlock_irqrestore(&info->slock, flags);
 481         tty_kref_put(tty);
 482
 483 #ifdef ROCKET_DEBUG_INTR
 484         printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head,
 485                info->xmit_tail, info->xmit_fifo_room);
 486 #endif
 487 }
 488
 489 /*
 490  *  Called when a serial port signals it has read data in it's RX FIFO.
 491  *  It checks what interrupts are pending and services them, including
 492  *  receiving serial data.
 493  */
 494 static void rp_handle_port(struct r_port *info)
 495 {
 496         CHANNEL_t *cp;
 497         struct tty_struct *tty;
 498         unsigned int IntMask, ChanStatus;
 499
 500         if (!info)
 501                 return;
 502
 503         if ((info->port.flags & ASYNC_INITIALIZED) == 0) {
 504                 printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
 505                                 "info->flags & NOT_INIT\n");
 506                 return;
 507         }
 508         tty = tty_port_tty_get(&info->port);
 509         if (!tty) {
 510                 printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
 511                                 "tty==NULL\n");
 512                 return;
 513         }
 514         cp = &info->channel;
 515
 516         IntMask = sGetChanIntID(cp) & info->intmask;
 517 #ifdef ROCKET_DEBUG_INTR
 518         printk(KERN_INFO "rp_interrupt %02x...\n", IntMask);
 519 #endif
 520         ChanStatus = sGetChanStatus(cp);
 521         if (IntMask & RXF_TRIG) {       /* Rx FIFO trigger level */
 522                 rp_do_receive(info, tty, cp, ChanStatus);
 523         }
 524         if (IntMask & DELTA_CD) {       /* CD change  */
 525 #if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
 526                 printk(KERN_INFO "ttyR%d CD now %s...\n", info->line,
 527                        (ChanStatus & CD_ACT) ? "on" : "off");
 528 #endif
 529                 if (!(ChanStatus & CD_ACT) && info->cd_status) {
 530 #ifdef ROCKET_DEBUG_HANGUP
 531                         printk(KERN_INFO "CD drop, calling hangup.\n");
 532 #endif
 533                         tty_hangup(tty);
 534                 }
 535                 info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
 536                 wake_up_interruptible(&info->port.open_wait);
 537         }
 538 #ifdef ROCKET_DEBUG_INTR
 539         if (IntMask & DELTA_CTS) {      /* CTS change */
 540                 printk(KERN_INFO "CTS change...\n");
 541         }
 542         if (IntMask & DELTA_DSR) {      /* DSR change */
 543                 printk(KERN_INFO "DSR change...\n");
 544         }
 545 #endif
 546         tty_kref_put(tty);
 547 }
 548
 549 /*
 550  *  The top level polling routine.  Repeats every 1/100 HZ (10ms).
 551  */
 552 static void rp_do_poll(unsigned long dummy)
 553 {
 554         CONTROLLER_t *ctlp;
 555         int ctrl, aiop, ch, line;
 556         unsigned int xmitmask, i;
 557         unsigned int CtlMask;
 558         unsigned char AiopMask;
 559         Word_t bit;
 560
 561         /*  Walk through all the boards (ctrl's) */
 562         for (ctrl = 0; ctrl < max_board; ctrl++) {
 563                 if (rcktpt_io_addr[ctrl] <= 0)
 564                         continue;
 565
 566                 /*  Get a ptr to the board's control struct */
 567                 ctlp = sCtlNumToCtlPtr(ctrl);
 568
 569                 /*  Get the interrupt status from the board */
 570 #ifdef CONFIG_PCI
 571                 if (ctlp->BusType == isPCI)
 572                         CtlMask = sPCIGetControllerIntStatus(ctlp);
 573                 else
 574 #endif
 575                         CtlMask = sGetControllerIntStatus(ctlp);
 576
 577                 /*  Check if any AIOP read bits are set */
 578                 for (aiop = 0; CtlMask; aiop++) {
 579                         bit = ctlp->AiopIntrBits[aiop];
 580                         if (CtlMask & bit) {
 581                                 CtlMask &= ~bit;
 582                                 AiopMask = sGetAiopIntStatus(ctlp, aiop);
 583
 584                                 /*  Check if any port read bits are set */
 585                                 for (ch = 0; AiopMask;  AiopMask >>= 1, ch++) {
 586                                         if (AiopMask & 1) {
 587
 588                                                 /*  Get the line number (/dev/ttyRx number). */
 589                                                 /*  Read the data from the port. */
 590                                                 line = GetLineNumber(ctrl, aiop, ch);
 591                                                 rp_handle_port(rp_table[line]);
 592                                         }
 593                                 }
 594                         }
 595                 }
 596
 597                 xmitmask = xmit_flags[ctrl];
 598
 599                 /*
 600                  *  xmit_flags contains bit-significant flags, indicating there is data
 601                  *  to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
 602                  *  1, ... (32 total possible).  The variable i has the aiop and ch
 603                  *  numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
 604                  */
 605                 if (xmitmask) {
 606                         for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
 607                                 if (xmitmask & (1 << i)) {
 608                                         aiop = (i & 0x18) >> 3;
 609                                         ch = i & 0x07;
 610                                         line = GetLineNumber(ctrl, aiop, ch);
 611                                         rp_do_transmit(rp_table[line]);
 612                                 }
 613                         }
 614                 }
 615         }
 616
 617         /*
 618          * Reset the timer so we get called at the next clock tick (10ms).
 619          */
 620         if (atomic_read(&rp_num_ports_open))
 621                 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
 622 }
 623
 624 /*
 625  *  Initializes the r_port structure for a port, as well as enabling the port on
 626  *  the board.
 627  *  Inputs:  board, aiop, chan numbers
 628  */
 629 static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
 630 {
 631         unsigned rocketMode;
 632         struct r_port *info;
 633         int line;
 634         CONTROLLER_T *ctlp;
 635
 636         /*  Get the next available line number */
 637         line = SetLineNumber(board, aiop, chan);
 638
 639         ctlp = sCtlNumToCtlPtr(board);
 640
 641         /*  Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
 642         info = kzalloc(sizeof (struct r_port), GFP_KERNEL);
 643         if (!info) {
 644                 printk(KERN_ERR "Couldn't allocate info struct for line #%d\n",
 645                                 line);
 646                 return;
 647         }
 648
 649         info->magic = RPORT_MAGIC;
 650         info->line = line;
 651         info->ctlp = ctlp;
 652         info->board = board;
 653         info->aiop = aiop;
 654         info->chan = chan;
 655         tty_port_init(&info->port);
 656         info->port.ops = &rocket_port_ops;
 657         init_completion(&info->close_wait);
 658         info->flags &= ~ROCKET_MODE_MASK;
 659         switch (pc104[board][line]) {
 660         case 422:
 661                 info->flags |= ROCKET_MODE_RS422;
 662                 break;
 663         case 485:
 664                 info->flags |= ROCKET_MODE_RS485;
 665                 break;
 666         case 232:
 667         default:
 668                 info->flags |= ROCKET_MODE_RS232;
 669                 break;
 670         }
 671
 672         info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
 673         if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
 674                 printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n",
 675                                 board, aiop, chan);
 676                 kfree(info);
 677                 return;
 678         }
 679
 680         rocketMode = info->flags & ROCKET_MODE_MASK;
 681
 682         if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
 683                 sEnRTSToggle(&info->channel);
 684         else
 685                 sDisRTSToggle(&info->channel);
 686
 687         if (ctlp->boardType == ROCKET_TYPE_PC104) {
 688                 switch (rocketMode) {
 689                 case ROCKET_MODE_RS485:
 690                         sSetInterfaceMode(&info->channel, InterfaceModeRS485);
 691                         break;
 692                 case ROCKET_MODE_RS422:
 693                         sSetInterfaceMode(&info->channel, InterfaceModeRS422);
 694                         break;
 695                 case ROCKET_MODE_RS232:
 696                 default:
 697                         if (info->flags & ROCKET_RTS_TOGGLE)
 698                                 sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
 699                         else
 700                                 sSetInterfaceMode(&info->channel, InterfaceModeRS232);
 701                         break;
 702                 }
 703         }
 704         spin_lock_init(&info->slock);
 705         mutex_init(&info->write_mtx);
 706         rp_table[line] = info;
 707         tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev :
 708                         NULL);
 709 }
 710
 711 /*
 712  *  Configures a rocketport port according to its termio settings.  Called from
 713  *  user mode into the driver (exception handler).  *info CD manipulation is spinlock protected.
 714  */
 715 static void configure_r_port(struct tty_struct *tty, struct r_port *info,
 716                              struct ktermios *old_termios)
 717 {
 718         unsigned cflag;
 719         unsigned long flags;
 720         unsigned rocketMode;
 721         int bits, baud, divisor;
 722         CHANNEL_t *cp;
 723         struct ktermios *t = tty->termios;
 724
 725         cp = &info->channel;
 726         cflag = t->c_cflag;
 727
 728         /* Byte size and parity */
 729         if ((cflag & CSIZE) == CS8) {
 730                 sSetData8(cp);
 731                 bits = 10;
 732         } else {
 733                 sSetData7(cp);
 734                 bits = 9;
 735         }
 736         if (cflag & CSTOPB) {
 737                 sSetStop2(cp);
 738                 bits++;
 739         } else {
 740                 sSetStop1(cp);
 741         }
 742
 743         if (cflag & PARENB) {
 744                 sEnParity(cp);
 745                 bits++;
 746                 if (cflag & PARODD) {
 747                         sSetOddParity(cp);
 748                 } else {
 749                         sSetEvenParity(cp);
 750                 }
 751         } else {
 752                 sDisParity(cp);
 753         }
 754
 755         /* baud rate */
 756         baud = tty_get_baud_rate(tty);
 757         if (!baud)
 758                 baud = 9600;
 759         divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
 760         if ((divisor >= 8192 || divisor < 0) && old_termios) {
 761                 baud = tty_termios_baud_rate(old_termios);
 762                 if (!baud)
 763                         baud = 9600;
 764                 divisor = (rp_baud_base[info->board] / baud) - 1;
 765         }
 766         if (divisor >= 8192 || divisor < 0) {
 767                 baud = 9600;
 768                 divisor = (rp_baud_base[info->board] / baud) - 1;
 769         }
 770         info->cps = baud / bits;
 771         sSetBaud(cp, divisor);
 772
 773         /* FIXME: Should really back compute a baud rate from the divisor */
 774         tty_encode_baud_rate(tty, baud, baud);
 775
 776         if (cflag & CRTSCTS) {
 777                 info->intmask |= DELTA_CTS;
 778                 sEnCTSFlowCtl(cp);
 779         } else {
 780                 info->intmask &= ~DELTA_CTS;
 781                 sDisCTSFlowCtl(cp);
 782         }
 783         if (cflag & CLOCAL) {
 784                 info->intmask &= ~DELTA_CD;
 785         } else {
 786                 spin_lock_irqsave(&info->slock, flags);
 787                 if (sGetChanStatus(cp) & CD_ACT)
 788                         info->cd_status = 1;
 789                 else
 790                         info->cd_status = 0;
 791                 info->intmask |= DELTA_CD;
 792                 spin_unlock_irqrestore(&info->slock, flags);
 793         }
 794
 795         /*
 796          * Handle software flow control in the board
 797          */
 798 #ifdef ROCKET_SOFT_FLOW
 799         if (I_IXON(tty)) {
 800                 sEnTxSoftFlowCtl(cp);
 801                 if (I_IXANY(tty)) {
 802                         sEnIXANY(cp);
 803                 } else {
 804                         sDisIXANY(cp);
 805                 }
 806                 sSetTxXONChar(cp, START_CHAR(tty));
 807                 sSetTxXOFFChar(cp, STOP_CHAR(tty));
 808         } else {
 809                 sDisTxSoftFlowCtl(cp);
 810                 sDisIXANY(cp);
 811                 sClrTxXOFF(cp);
 812         }
 813 #endif
 814
 815         /*
 816          * Set up ignore/read mask words
 817          */
 818         info->read_status_mask = STMRCVROVRH | 0xFF;
 819         if (I_INPCK(tty))
 820                 info->read_status_mask |= STMFRAMEH | STMPARITYH;
 821         if (I_BRKINT(tty) || I_PARMRK(tty))
 822                 info->read_status_mask |= STMBREAKH;
 823
 824         /*
 825          * Characters to ignore
 826          */
 827         info->ignore_status_mask = 0;
 828         if (I_IGNPAR(tty))
 829                 info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
 830         if (I_IGNBRK(tty)) {
 831                 info->ignore_status_mask |= STMBREAKH;
 832                 /*
 833                  * If we're ignoring parity and break indicators,
 834                  * ignore overruns too.  (For real raw support).
 835                  */
 836                 if (I_IGNPAR(tty))
 837                         info->ignore_status_mask |= STMRCVROVRH;
 838         }
 839
 840         rocketMode = info->flags & ROCKET_MODE_MASK;
 841
 842         if ((info->flags & ROCKET_RTS_TOGGLE)
 843             || (rocketMode == ROCKET_MODE_RS485))
 844                 sEnRTSToggle(cp);
 845         else
 846                 sDisRTSToggle(cp);
 847
 848         sSetRTS(&info->channel);
 849
 850         if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
 851                 switch (rocketMode) {
 852                 case ROCKET_MODE_RS485:
 853                         sSetInterfaceMode(cp, InterfaceModeRS485);
 854                         break;
 855                 case ROCKET_MODE_RS422:
 856                         sSetInterfaceMode(cp, InterfaceModeRS422);
 857                         break;
 858                 case ROCKET_MODE_RS232:
 859                 default:
 860                         if (info->flags & ROCKET_RTS_TOGGLE)
 861                                 sSetInterfaceMode(cp, InterfaceModeRS232T);
 862                         else
 863                                 sSetInterfaceMode(cp, InterfaceModeRS232);
 864                         break;
 865                 }
 866         }
 867 }
 868
 869 static int carrier_raised(struct tty_port *port)
 870 {
 871         struct r_port *info = container_of(port, struct r_port, port);
 872         return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
 873 }
 874
 875 static void dtr_rts(struct tty_port *port, int on)
 876 {
 877         struct r_port *info = container_of(port, struct r_port, port);
 878         if (on) {
 879                 sSetDTR(&info->channel);
 880                 sSetRTS(&info->channel);
 881         } else {
 882                 sClrDTR(&info->channel);
 883                 sClrRTS(&info->channel);
 884         }
 885 }
 886
 887 /*
 888  *  Exception handler that opens a serial port.  Creates xmit_buf storage, fills in
 889  *  port's r_port struct.  Initializes the port hardware.
 890  */
 891 static int rp_open(struct tty_struct *tty, struct file *filp)
 892 {
 893         struct r_port *info;
 894         struct tty_port *port;
 895         int line = 0, retval;
 896         CHANNEL_t *cp;
 897         unsigned long page;
 898
 899         line = tty->index;
 900         if (line < 0 || line >= MAX_RP_PORTS || ((info = rp_table[line]) == NULL))
 901                 return -ENXIO;
 902         port = &info->port;
 903
 904         page = __get_free_page(GFP_KERNEL);
 905         if (!page)
 906                 return -ENOMEM;
 907
 908         if (port->flags & ASYNC_CLOSING) {
 909                 retval = wait_for_completion_interruptible(&info->close_wait);
 910                 free_page(page);
 911                 if (retval)
 912                         return retval;
 913                 return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
 914         }
 915
 916         /*
 917          * We must not sleep from here until the port is marked fully in use.
 918          */
 919         if (info->xmit_buf)
 920                 free_page(page);
 921         else
 922                 info->xmit_buf = (unsigned char *) page;
 923
 924         tty->driver_data = info;
 925         tty_port_tty_set(port, tty);
 926
 927         if (port->count++ == 0) {
 928                 atomic_inc(&rp_num_ports_open);
 929
 930 #ifdef ROCKET_DEBUG_OPEN
 931                 printk(KERN_INFO "rocket mod++ = %d...\n",
 932                                 atomic_read(&rp_num_ports_open));
 933 #endif
 934         }
 935 #ifdef ROCKET_DEBUG_OPEN
 936         printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->port.count);
 937 #endif
 938
 939         /*
 940          * Info->count is now 1; so it's safe to sleep now.
 941          */
 942         if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
 943                 cp = &info->channel;
 944                 sSetRxTrigger(cp, TRIG_1);
 945                 if (sGetChanStatus(cp) & CD_ACT)
 946                         info->cd_status = 1;
 947                 else
 948                         info->cd_status = 0;
 949                 sDisRxStatusMode(cp);
 950                 sFlushRxFIFO(cp);
 951                 sFlushTxFIFO(cp);
 952
 953                 sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
 954                 sSetRxTrigger(cp, TRIG_1);
 955
 956                 sGetChanStatus(cp);
 957                 sDisRxStatusMode(cp);
 958                 sClrTxXOFF(cp);
 959
 960                 sDisCTSFlowCtl(cp);
 961                 sDisTxSoftFlowCtl(cp);
 962
 963                 sEnRxFIFO(cp);
 964                 sEnTransmit(cp);
 965
 966                 set_bit(ASYNCB_INITIALIZED, &info->port.flags);
 967
 968                 /*
 969                  * Set up the tty->alt_speed kludge
 970                  */
 971                 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
 972                         tty->alt_speed = 57600;
 973                 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
 974                         tty->alt_speed = 115200;
 975                 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
 976                         tty->alt_speed = 230400;
 977                 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
 978                         tty->alt_speed = 460800;
 979
 980                 configure_r_port(tty, info, NULL);
 981                 if (tty->termios->c_cflag & CBAUD) {
 982                         sSetDTR(cp);
 983                         sSetRTS(cp);
 984                 }
 985         }
 986         /*  Starts (or resets) the maint polling loop */
 987         mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
 988
 989         retval = tty_port_block_til_ready(port, tty, filp);
 990         if (retval) {
 991 #ifdef ROCKET_DEBUG_OPEN
 992                 printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
 993 #endif
 994                 return retval;
 995         }
 996         return 0;
 997 }
 998
 999 /*
1000  *  Exception handler that closes a serial port. info->port.count is considered critical.
1001  */
1002 static void rp_close(struct tty_struct *tty, struct file *filp)
1003 {
1004         struct r_port *info = tty->driver_data;
1005         struct tty_port *port = &info->port;
1006         int timeout;
1007         CHANNEL_t *cp;
1008
1009         if (rocket_paranoia_check(info, "rp_close"))
1010                 return;
1011
1012 #ifdef ROCKET_DEBUG_OPEN
1013         printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->port.count);
1014 #endif
1015
1016         if (tty_port_close_start(port, tty, filp) == 0)
1017                 return;
1018
1019         mutex_lock(&port->mutex);
1020         cp = &info->channel;
1021         /*
1022          * Before we drop DTR, make sure the UART transmitter
1023          * has completely drained; this is especially
1024          * important if there is a transmit FIFO!
1025          */
1026         timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
1027         if (timeout == 0)
1028                 timeout = 1;
1029         rp_wait_until_sent(tty, timeout);
1030         clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1031
1032         sDisTransmit(cp);
1033         sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1034         sDisCTSFlowCtl(cp);
1035         sDisTxSoftFlowCtl(cp);
1036         sClrTxXOFF(cp);
1037         sFlushRxFIFO(cp);
1038         sFlushTxFIFO(cp);
1039         sClrRTS(cp);
1040         if (C_HUPCL(tty))
1041                 sClrDTR(cp);
1042
1043         rp_flush_buffer(tty);
1044
1045         tty_ldisc_flush(tty);
1046
1047         clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1048
1049         /* We can't yet use tty_port_close_end as the buffer handling in this
1050            driver is a bit different to the usual */
1051
1052         if (port->blocked_open) {
1053                 if (port->close_delay) {
1054                         msleep_interruptible(jiffies_to_msecs(port->close_delay));
1055                 }
1056                 wake_up_interruptible(&port->open_wait);
1057         } else {
1058                 if (info->xmit_buf) {
1059                         free_page((unsigned long) info->xmit_buf);
1060                         info->xmit_buf = NULL;
1061                 }
1062         }
1063         spin_lock_irq(&port->lock);
1064         info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
1065         tty->closing = 0;
1066         spin_unlock_irq(&port->lock);
1067         mutex_unlock(&port->mutex);
1068         tty_port_tty_set(port, NULL);
1069
1070         wake_up_interruptible(&port->close_wait);
1071         complete_all(&info->close_wait);
1072         atomic_dec(&rp_num_ports_open);
1073
1074 #ifdef ROCKET_DEBUG_OPEN
1075         printk(KERN_INFO "rocket mod-- = %d...\n",
1076                         atomic_read(&rp_num_ports_open));
1077         printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
1078 #endif
1079
1080 }
1081
1082 static void rp_set_termios(struct tty_struct *tty,
1083                            struct ktermios *old_termios)
1084 {
1085         struct r_port *info = tty->driver_data;
1086         CHANNEL_t *cp;
1087         unsigned cflag;
1088
1089         if (rocket_paranoia_check(info, "rp_set_termios"))
1090                 return;
1091
1092         cflag = tty->termios->c_cflag;
1093
1094         /*
1095          * This driver doesn't support CS5 or CS6
1096          */
1097         if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
1098                 tty->termios->c_cflag =
1099                     ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
1100         /* Or CMSPAR */
1101         tty->termios->c_cflag &= ~CMSPAR;
1102
1103         configure_r_port(tty, info, old_termios);
1104
1105         cp = &info->channel;
1106
1107         /* Handle transition to B0 status */
1108         if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
1109                 sClrDTR(cp);
1110                 sClrRTS(cp);
1111         }
1112
1113         /* Handle transition away from B0 status */
1114         if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
1115                 if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
1116                         sSetRTS(cp);
1117                 sSetDTR(cp);
1118         }
1119
1120         if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
1121                 tty->hw_stopped = 0;
1122                 rp_start(tty);
1123         }
1124 }
1125
1126 static int rp_break(struct tty_struct *tty, int break_state)
1127 {
1128         struct r_port *info = tty->driver_data;
1129         unsigned long flags;
1130
1131         if (rocket_paranoia_check(info, "rp_break"))
1132                 return -EINVAL;
1133
1134         spin_lock_irqsave(&info->slock, flags);
1135         if (break_state == -1)
1136                 sSendBreak(&info->channel);
1137         else
1138                 sClrBreak(&info->channel);
1139         spin_unlock_irqrestore(&info->slock, flags);
1140         return 0;
1141 }
1142
1143 /*
1144  * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
1145  * the UPCI boards was added, it was decided to make this a function because
1146  * the macro was getting too complicated. All cases except the first one
1147  * (UPCIRingInd) are taken directly from the original macro.
1148  */
1149 static int sGetChanRI(CHANNEL_T * ChP)
1150 {
1151         CONTROLLER_t *CtlP = ChP->CtlP;
1152         int ChanNum = ChP->ChanNum;
1153         int RingInd = 0;
1154
1155         if (CtlP->UPCIRingInd)
1156                 RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
1157         else if (CtlP->AltChanRingIndicator)
1158                 RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
1159         else if (CtlP->boardType == ROCKET_TYPE_PC104)
1160                 RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
1161
1162         return RingInd;
1163 }
1164
1165 /********************************************************************************************/
1166 /*  Here are the routines used by rp_ioctl.  These are all called from exception handlers.  */
1167
1168 /*
1169  *  Returns the state of the serial modem control lines.  These next 2 functions
1170  *  are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
1171  */
1172 static int rp_tiocmget(struct tty_struct *tty)
1173 {
1174         struct r_port *info = tty->driver_data;
1175         unsigned int control, result, ChanStatus;
1176
1177         ChanStatus = sGetChanStatusLo(&info->channel);
1178         control = info->channel.TxControl[3];
1179         result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
1180                 ((control & SET_DTR) ?  TIOCM_DTR : 0) |
1181                 ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
1182                 (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
1183                 ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
1184                 ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
1185
1186         return result;
1187 }
1188
1189 /*
1190  *  Sets the modem control lines
1191  */
1192 static int rp_tiocmset(struct tty_struct *tty,
1193                                 unsigned int set, unsigned int clear)
1194 {
1195         struct r_port *info = tty->driver_data;
1196
1197         if (set & TIOCM_RTS)
1198                 info->channel.TxControl[3] |= SET_RTS;
1199         if (set & TIOCM_DTR)
1200                 info->channel.TxControl[3] |= SET_DTR;
1201         if (clear & TIOCM_RTS)
1202                 info->channel.TxControl[3] &= ~SET_RTS;
1203         if (clear & TIOCM_DTR)
1204                 info->channel.TxControl[3] &= ~SET_DTR;
1205
1206         out32(info->channel.IndexAddr, info->channel.TxControl);
1207         return 0;
1208 }
1209
1210 static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
1211 {
1212         struct rocket_config tmp;
1213
1214         if (!retinfo)
1215                 return -EFAULT;
1216         memset(&tmp, 0, sizeof (tmp));
1217         mutex_lock(&info->port.mutex);
1218         tmp.line = info->line;
1219         tmp.flags = info->flags;
1220         tmp.close_delay = info->port.close_delay;
1221         tmp.closing_wait = info->port.closing_wait;
1222         tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
1223         mutex_unlock(&info->port.mutex);
1224
1225         if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
1226                 return -EFAULT;
1227         return 0;
1228 }
1229
1230 static int set_config(struct tty_struct *tty, struct r_port *info,
1231                                         struct rocket_config __user *new_info)
1232 {
1233         struct rocket_config new_serial;
1234
1235         if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
1236                 return -EFAULT;
1237
1238         mutex_lock(&info->port.mutex);
1239         if (!capable(CAP_SYS_ADMIN))
1240         {
1241                 if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK)) {
1242                         mutex_unlock(&info->port.mutex);
1243                         return -EPERM;
1244                 }
1245                 info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
1246                 configure_r_port(tty, info, NULL);
1247                 mutex_unlock(&info->port.mutex);
1248                 return 0;
1249         }
1250
1251         info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
1252         info->port.close_delay = new_serial.close_delay;
1253         info->port.closing_wait = new_serial.closing_wait;
1254
1255         if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
1256                 tty->alt_speed = 57600;
1257         if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
1258                 tty->alt_speed = 115200;
1259         if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
1260                 tty->alt_speed = 230400;
1261         if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
1262                 tty->alt_speed = 460800;
1263         mutex_unlock(&info->port.mutex);
1264
1265         configure_r_port(tty, info, NULL);
1266         return 0;
1267 }
1268
1269 /*
1270  *  This function fills in a rocket_ports struct with information
1271  *  about what boards/ports are in the system.  This info is passed
1272  *  to user space.  See setrocket.c where the info is used to create
1273  *  the /dev/ttyRx ports.
1274  */
1275 static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
1276 {
1277         struct rocket_ports tmp;
1278         int board;
1279
1280         if (!retports)
1281                 return -EFAULT;
1282         memset(&tmp, 0, sizeof (tmp));
1283         tmp.tty_major = rocket_driver->major;
1284
1285         for (board = 0; board < 4; board++) {
1286                 tmp.rocketModel[board].model = rocketModel[board].model;
1287                 strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
1288                 tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
1289                 tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
1290                 tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
1291         }
1292         if (copy_to_user(retports, &tmp, sizeof (*retports)))
1293                 return -EFAULT;
1294         return 0;
1295 }
1296
1297 static int reset_rm2(struct r_port *info, void __user *arg)
1298 {
1299         int reset;
1300
1301         if (!capable(CAP_SYS_ADMIN))
1302                 return -EPERM;
1303
1304         if (copy_from_user(&reset, arg, sizeof (int)))
1305                 return -EFAULT;
1306         if (reset)
1307                 reset = 1;
1308
1309         if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
1310             rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
1311                 return -EINVAL;
1312
1313         if (info->ctlp->BusType == isISA)
1314                 sModemReset(info->ctlp, info->chan, reset);
1315         else
1316                 sPCIModemReset(info->ctlp, info->chan, reset);
1317
1318         return 0;
1319 }
1320
1321 static int get_version(struct r_port *info, struct rocket_version __user *retvers)
1322 {
1323         if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
1324                 return -EFAULT;
1325         return 0;
1326 }
1327
1328 /*  IOCTL call handler into the driver */
1329 static int rp_ioctl(struct tty_struct *tty,
1330                     unsigned int cmd, unsigned long arg)
1331 {
1332         struct r_port *info = tty->driver_data;
1333         void __user *argp = (void __user *)arg;
1334         int ret = 0;
1335
1336         if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
1337                 return -ENXIO;
1338
1339         switch (cmd) {
1340         case RCKP_GET_STRUCT:
1341                 if (copy_to_user(argp, info, sizeof (struct r_port)))
1342                         ret = -EFAULT;
1343                 break;
1344         case RCKP_GET_CONFIG:
1345                 ret = get_config(info, argp);
1346                 break;
1347         case RCKP_SET_CONFIG:
1348                 ret = set_config(tty, info, argp);
1349                 break;
1350         case RCKP_GET_PORTS:
1351                 ret = get_ports(info, argp);
1352                 break;
1353         case RCKP_RESET_RM2:
1354                 ret = reset_rm2(info, argp);
1355                 break;
1356         case RCKP_GET_VERSION:
1357                 ret = get_version(info, argp);
1358                 break;
1359         default:
1360                 ret = -ENOIOCTLCMD;
1361         }
1362         return ret;
1363 }
1364
1365 static void rp_send_xchar(struct tty_struct *tty, char ch)
1366 {
1367         struct r_port *info = tty->driver_data;
1368         CHANNEL_t *cp;
1369
1370         if (rocket_paranoia_check(info, "rp_send_xchar"))
1371                 return;
1372
1373         cp = &info->channel;
1374         if (sGetTxCnt(cp))
1375                 sWriteTxPrioByte(cp, ch);
1376         else
1377                 sWriteTxByte(sGetTxRxDataIO(cp), ch);
1378 }
1379
1380 static void rp_throttle(struct tty_struct *tty)
1381 {
1382         struct r_port *info = tty->driver_data;
1383
1384 #ifdef ROCKET_DEBUG_THROTTLE
1385         printk(KERN_INFO "throttle %s: %d....\n", tty->name,
1386                tty->ldisc.chars_in_buffer(tty));
1387 #endif
1388
1389         if (rocket_paranoia_check(info, "rp_throttle"))
1390                 return;
1391
1392         if (I_IXOFF(tty))
1393                 rp_send_xchar(tty, STOP_CHAR(tty));
1394
1395         sClrRTS(&info->channel);
1396 }
1397
1398 static void rp_unthrottle(struct tty_struct *tty)
1399 {
1400         struct r_port *info = tty->driver_data;
1401 #ifdef ROCKET_DEBUG_THROTTLE
1402         printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
1403                tty->ldisc.chars_in_buffer(tty));
1404 #endif
1405
1406         if (rocket_paranoia_check(info, "rp_throttle"))
1407                 return;
1408
1409         if (I_IXOFF(tty))
1410                 rp_send_xchar(tty, START_CHAR(tty));
1411
1412         sSetRTS(&info->channel);
1413 }
1414
1415 /*
1416  * ------------------------------------------------------------
1417  * rp_stop() and rp_start()
1418  *
1419  * This routines are called before setting or resetting tty->stopped.
1420  * They enable or disable transmitter interrupts, as necessary.
1421  * ------------------------------------------------------------
1422  */
1423 static void rp_stop(struct tty_struct *tty)
1424 {
1425         struct r_port *info = tty->driver_data;
1426
1427 #ifdef ROCKET_DEBUG_FLOW
1428         printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
1429                info->xmit_cnt, info->xmit_fifo_room);
1430 #endif
1431
1432         if (rocket_paranoia_check(info, "rp_stop"))
1433                 return;
1434
1435         if (sGetTxCnt(&info->channel))
1436                 sDisTransmit(&info->channel);
1437 }
1438
1439 static void rp_start(struct tty_struct *tty)
1440 {
1441         struct r_port *info = tty->driver_data;
1442
1443 #ifdef ROCKET_DEBUG_FLOW
1444         printk(KERN_INFO "start %s: %d %d....\n", tty->name,
1445                info->xmit_cnt, info->xmit_fifo_room);
1446 #endif
1447
1448         if (rocket_paranoia_check(info, "rp_stop"))
1449                 return;
1450
1451         sEnTransmit(&info->channel);
1452         set_bit((info->aiop * 8) + info->chan,
1453                 (void *) &xmit_flags[info->board]);
1454 }
1455
1456 /*
1457  * rp_wait_until_sent() --- wait until the transmitter is empty
1458  */
1459 static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
1460 {
1461         struct r_port *info = tty->driver_data;
1462         CHANNEL_t *cp;
1463         unsigned long orig_jiffies;
1464         int check_time, exit_time;
1465         int txcnt;
1466
1467         if (rocket_paranoia_check(info, "rp_wait_until_sent"))
1468                 return;
1469
1470         cp = &info->channel;
1471
1472         orig_jiffies = jiffies;
1473 #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1474         printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout,
1475                jiffies);
1476         printk(KERN_INFO "cps=%d...\n", info->cps);
1477 #endif
1478         while (1) {
1479                 txcnt = sGetTxCnt(cp);
1480                 if (!txcnt) {
1481                         if (sGetChanStatusLo(cp) & TXSHRMT)
1482                                 break;
1483                         check_time = (HZ / info->cps) / 5;
1484                 } else {
1485                         check_time = HZ * txcnt / info->cps;
1486                 }
1487                 if (timeout) {
1488                         exit_time = orig_jiffies + timeout - jiffies;
1489                         if (exit_time <= 0)
1490                                 break;
1491                         if (exit_time < check_time)
1492                                 check_time = exit_time;
1493                 }
1494                 if (check_time == 0)
1495                         check_time = 1;
1496 #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1497                 printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...\n", txcnt,
1498                                 jiffies, check_time);
1499 #endif
1500                 msleep_interruptible(jiffies_to_msecs(check_time));
1501                 if (signal_pending(current))
1502                         break;
1503         }
1504         __set_current_state(TASK_RUNNING);
1505 #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1506         printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
1507 #endif
1508 }
1509
1510 /*
1511  * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
1512  */
1513 static void rp_hangup(struct tty_struct *tty)
1514 {
1515         CHANNEL_t *cp;
1516         struct r_port *info = tty->driver_data;
1517         unsigned long flags;
1518
1519         if (rocket_paranoia_check(info, "rp_hangup"))
1520                 return;
1521
1522 #if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
1523         printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
1524 #endif
1525         rp_flush_buffer(tty);
1526         spin_lock_irqsave(&info->port.lock, flags);
1527         if (info->port.flags & ASYNC_CLOSING) {
1528                 spin_unlock_irqrestore(&info->port.lock, flags);
1529                 return;
1530         }
1531         if (info->port.count)
1532                 atomic_dec(&rp_num_ports_open);
1533         clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1534         spin_unlock_irqrestore(&info->port.lock, flags);
1535
1536         tty_port_hangup(&info->port);
1537
1538         cp = &info->channel;
1539         sDisRxFIFO(cp);
1540         sDisTransmit(cp);
1541         sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1542         sDisCTSFlowCtl(cp);
1543         sDisTxSoftFlowCtl(cp);
1544         sClrTxXOFF(cp);
1545         clear_bit(ASYNCB_INITIALIZED, &info->port.flags);
1546
1547         wake_up_interruptible(&info->port.open_wait);
1548 }
1549
1550 /*
1551  *  Exception handler - write char routine.  The RocketPort driver uses a
1552  *  double-buffering strategy, with the twist that if the in-memory CPU
1553  *  buffer is empty, and there's space in the transmit FIFO, the
1554  *  writing routines will write directly to transmit FIFO.
1555  *  Write buffer and counters protected by spinlocks
1556  */
1557 static int rp_put_char(struct tty_struct *tty, unsigned char ch)
1558 {
1559         struct r_port *info = tty->driver_data;
1560         CHANNEL_t *cp;
1561         unsigned long flags;
1562
1563         if (rocket_paranoia_check(info, "rp_put_char"))
1564                 return 0;
1565
1566         /*
1567          * Grab the port write mutex, locking out other processes that try to
1568          * write to this port
1569          */
1570         mutex_lock(&info->write_mtx);
1571
1572 #ifdef ROCKET_DEBUG_WRITE
1573         printk(KERN_INFO "rp_put_char %c...\n", ch);
1574 #endif
1575
1576         spin_lock_irqsave(&info->slock, flags);
1577         cp = &info->channel;
1578
1579         if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
1580                 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1581
1582         if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
1583                 info->xmit_buf[info->xmit_head++] = ch;
1584                 info->xmit_head &= XMIT_BUF_SIZE - 1;
1585                 info->xmit_cnt++;
1586                 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1587         } else {
1588                 sOutB(sGetTxRxDataIO(cp), ch);
1589                 info->xmit_fifo_room--;
1590         }
1591         spin_unlock_irqrestore(&info->slock, flags);
1592         mutex_unlock(&info->write_mtx);
1593         return 1;
1594 }
1595
1596 /*
1597  *  Exception handler - write routine, called when user app writes to the device.
1598  *  A per port write mutex is used to protect from another process writing to
1599  *  this port at the same time.  This other process could be running on the other CPU
1600  *  or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
1601  *  Spinlocks protect the info xmit members.
1602  */
1603 static int rp_write(struct tty_struct *tty,
1604                     const unsigned char *buf, int count)
1605 {
1606         struct r_port *info = tty->driver_data;
1607         CHANNEL_t *cp;
1608         const unsigned char *b;
1609         int c, retval = 0;
1610         unsigned long flags;
1611
1612         if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
1613                 return 0;
1614
1615         if (mutex_lock_interruptible(&info->write_mtx))
1616                 return -ERESTARTSYS;
1617
1618 #ifdef ROCKET_DEBUG_WRITE
1619         printk(KERN_INFO "rp_write %d chars...\n", count);
1620 #endif
1621         cp = &info->channel;
1622
1623         if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
1624                 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1625
1626         /*
1627          *  If the write queue for the port is empty, and there is FIFO space, stuff bytes
1628          *  into FIFO.  Use the write queue for temp storage.
1629          */
1630         if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
1631                 c = min(count, info->xmit_fifo_room);
1632                 b = buf;
1633
1634                 /*  Push data into FIFO, 2 bytes at a time */
1635                 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
1636
1637                 /*  If there is a byte remaining, write it */
1638                 if (c & 1)
1639                         sOutB(sGetTxRxDataIO(cp), b[c - 1]);
1640
1641                 retval += c;
1642                 buf += c;
1643                 count -= c;
1644
1645                 spin_lock_irqsave(&info->slock, flags);
1646                 info->xmit_fifo_room -= c;
1647                 spin_unlock_irqrestore(&info->slock, flags);
1648         }
1649
1650         /* If count is zero, we wrote it all and are done */
1651         if (!count)
1652                 goto end;
1653
1654         /*  Write remaining data into the port's xmit_buf */
1655         while (1) {
1656                 /* Hung up ? */
1657                 if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags))
1658                         goto end;
1659                 c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
1660                 c = min(c, XMIT_BUF_SIZE - info->xmit_head);
1661                 if (c <= 0)
1662                         break;
1663
1664                 b = buf;
1665                 memcpy(info->xmit_buf + info->xmit_head, b, c);
1666
1667                 spin_lock_irqsave(&info->slock, flags);
1668                 info->xmit_head =
1669                     (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
1670                 info->xmit_cnt += c;
1671                 spin_unlock_irqrestore(&info->slock, flags);
1672
1673                 buf += c;
1674                 count -= c;
1675                 retval += c;
1676         }
1677
1678         if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
1679                 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1680
1681 end:
1682         if (info->xmit_cnt < WAKEUP_CHARS) {
1683                 tty_wakeup(tty);
1684 #ifdef ROCKETPORT_HAVE_POLL_WAIT
1685                 wake_up_interruptible(&tty->poll_wait);
1686 #endif
1687         }
1688         mutex_unlock(&info->write_mtx);
1689         return retval;
1690 }
1691
1692 /*
1693  * Return the number of characters that can be sent.  We estimate
1694  * only using the in-memory transmit buffer only, and ignore the
1695  * potential space in the transmit FIFO.
1696  */
1697 static int rp_write_room(struct tty_struct *tty)
1698 {
1699         struct r_port *info = tty->driver_data;
1700         int ret;
1701
1702         if (rocket_paranoia_check(info, "rp_write_room"))
1703                 return 0;
1704
1705         ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
1706         if (ret < 0)
1707                 ret = 0;
1708 #ifdef ROCKET_DEBUG_WRITE
1709         printk(KERN_INFO "rp_write_room returns %d...\n", ret);
1710 #endif
1711         return ret;
1712 }
1713
1714 /*
1715  * Return the number of characters in the buffer.  Again, this only
1716  * counts those characters in the in-memory transmit buffer.
1717  */
1718 static int rp_chars_in_buffer(struct tty_struct *tty)
1719 {
1720         struct r_port *info = tty->driver_data;
1721
1722         if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
1723                 return 0;
1724
1725 #ifdef ROCKET_DEBUG_WRITE
1726         printk(KERN_INFO "rp_chars_in_buffer returns %d...\n", info->xmit_cnt);
1727 #endif
1728         return info->xmit_cnt;
1729 }
1730
1731 /*
1732  *  Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
1733  *  r_port struct for the port.  Note that spinlock are used to protect info members,
1734  *  do not call this function if the spinlock is already held.
1735  */
1736 static void rp_flush_buffer(struct tty_struct *tty)
1737 {
1738         struct r_port *info = tty->driver_data;
1739         CHANNEL_t *cp;
1740         unsigned long flags;
1741
1742         if (rocket_paranoia_check(info, "rp_flush_buffer"))
1743                 return;
1744
1745         spin_lock_irqsave(&info->slock, flags);
1746         info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1747         spin_unlock_irqrestore(&info->slock, flags);
1748
1749 #ifdef ROCKETPORT_HAVE_POLL_WAIT
1750         wake_up_interruptible(&tty->poll_wait);
1751 #endif
1752         tty_wakeup(tty);
1753
1754         cp = &info->channel;
1755         sFlushTxFIFO(cp);
1756 }
1757
1758 #ifdef CONFIG_PCI
1759
1760 static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
1761         { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
1762         { }
1763 };
1764 MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
1765
1766 /*
1767  *  Called when a PCI card is found.  Retrieves and stores model information,
1768  *  init's aiopic and serial port hardware.
1769  *  Inputs:  i is the board number (0-n)
1770  */
1771 static __init int register_PCI(int i, struct pci_dev *dev)
1772 {
1773         int num_aiops, aiop, max_num_aiops, num_chan, chan;
1774         unsigned int aiopio[MAX_AIOPS_PER_BOARD];
1775         CONTROLLER_t *ctlp;
1776
1777         int fast_clock = 0;
1778         int altChanRingIndicator = 0;
1779         int ports_per_aiop = 8;
1780         WordIO_t ConfigIO = 0;
1781         ByteIO_t UPCIRingInd = 0;
1782
1783         if (!dev || pci_enable_device(dev))
1784                 return 0;
1785
1786         rcktpt_io_addr[i] = pci_resource_start(dev, 0);
1787
1788         rcktpt_type[i] = ROCKET_TYPE_NORMAL;
1789         rocketModel[i].loadrm2 = 0;
1790         rocketModel[i].startingPortNumber = nextLineNumber;
1791
1792         /*  Depending on the model, set up some config variables */
1793         switch (dev->device) {
1794         case PCI_DEVICE_ID_RP4QUAD:
1795                 max_num_aiops = 1;
1796                 ports_per_aiop = 4;
1797                 rocketModel[i].model = MODEL_RP4QUAD;
1798                 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
1799                 rocketModel[i].numPorts = 4;
1800                 break;
1801         case PCI_DEVICE_ID_RP8OCTA:
1802                 max_num_aiops = 1;
1803                 rocketModel[i].model = MODEL_RP8OCTA;
1804                 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
1805                 rocketModel[i].numPorts = 8;
1806                 break;
1807         case PCI_DEVICE_ID_URP8OCTA:
1808                 max_num_aiops = 1;
1809                 rocketModel[i].model = MODEL_UPCI_RP8OCTA;
1810                 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
1811                 rocketModel[i].numPorts = 8;
1812                 break;
1813         case PCI_DEVICE_ID_RP8INTF:
1814                 max_num_aiops = 1;
1815                 rocketModel[i].model = MODEL_RP8INTF;
1816                 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
1817                 rocketModel[i].numPorts = 8;
1818                 break;
1819         case PCI_DEVICE_ID_URP8INTF:
1820                 max_num_aiops = 1;
1821                 rocketModel[i].model = MODEL_UPCI_RP8INTF;
1822                 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
1823                 rocketModel[i].numPorts = 8;
1824                 break;
1825         case PCI_DEVICE_ID_RP8J:
1826                 max_num_aiops = 1;
1827                 rocketModel[i].model = MODEL_RP8J;
1828                 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
1829                 rocketModel[i].numPorts = 8;
1830                 break;
1831         case PCI_DEVICE_ID_RP4J:
1832                 max_num_aiops = 1;
1833                 ports_per_aiop = 4;
1834                 rocketModel[i].model = MODEL_RP4J;
1835                 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
1836                 rocketModel[i].numPorts = 4;
1837                 break;
1838         case PCI_DEVICE_ID_RP8SNI:
1839                 max_num_aiops = 1;
1840                 rocketModel[i].model = MODEL_RP8SNI;
1841                 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
1842                 rocketModel[i].numPorts = 8;
1843                 break;
1844         case PCI_DEVICE_ID_RP16SNI:
1845                 max_num_aiops = 2;
1846                 rocketModel[i].model = MODEL_RP16SNI;
1847                 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
1848                 rocketModel[i].numPorts = 16;
1849                 break;
1850         case PCI_DEVICE_ID_RP16INTF:
1851                 max_num_aiops = 2;
1852                 rocketModel[i].model = MODEL_RP16INTF;
1853                 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
1854                 rocketModel[i].numPorts = 16;
1855                 break;
1856         case PCI_DEVICE_ID_URP16INTF:
1857                 max_num_aiops = 2;
1858                 rocketModel[i].model = MODEL_UPCI_RP16INTF;
1859                 strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
1860                 rocketModel[i].numPorts = 16;
1861                 break;
1862         case PCI_DEVICE_ID_CRP16INTF:
1863                 max_num_aiops = 2;
1864                 rocketModel[i].model = MODEL_CPCI_RP16INTF;
1865                 strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
1866                 rocketModel[i].numPorts = 16;
1867                 break;
1868         case PCI_DEVICE_ID_RP32INTF:
1869                 max_num_aiops = 4;
1870                 rocketModel[i].model = MODEL_RP32INTF;
1871                 strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
1872                 rocketModel[i].numPorts = 32;
1873                 break;
1874         case PCI_DEVICE_ID_URP32INTF:
1875                 max_num_aiops = 4;
1876                 rocketModel[i].model = MODEL_UPCI_RP32INTF;
1877                 strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
1878                 rocketModel[i].numPorts = 32;
1879                 break;
1880         case PCI_DEVICE_ID_RPP4:
1881                 max_num_aiops = 1;
1882                 ports_per_aiop = 4;
1883                 altChanRingIndicator++;
1884                 fast_clock++;
1885                 rocketModel[i].model = MODEL_RPP4;
1886                 strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
1887                 rocketModel[i].numPorts = 4;
1888                 break;
1889         case PCI_DEVICE_ID_RPP8:
1890                 max_num_aiops = 2;
1891                 ports_per_aiop = 4;
1892                 altChanRingIndicator++;
1893                 fast_clock++;
1894                 rocketModel[i].model = MODEL_RPP8;
1895                 strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
1896                 rocketModel[i].numPorts = 8;
1897                 break;
1898         case PCI_DEVICE_ID_RP2_232:
1899                 max_num_aiops = 1;
1900                 ports_per_aiop = 2;
1901                 altChanRingIndicator++;
1902                 fast_clock++;
1903                 rocketModel[i].model = MODEL_RP2_232;
1904                 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
1905                 rocketModel[i].numPorts = 2;
1906                 break;
1907         case PCI_DEVICE_ID_RP2_422:
1908                 max_num_aiops = 1;
1909                 ports_per_aiop = 2;
1910                 altChanRingIndicator++;
1911                 fast_clock++;
1912                 rocketModel[i].model = MODEL_RP2_422;
1913                 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
1914                 rocketModel[i].numPorts = 2;
1915                 break;
1916         case PCI_DEVICE_ID_RP6M:
1917
1918                 max_num_aiops = 1;
1919                 ports_per_aiop = 6;
1920
1921                 /*  If revision is 1, the rocketmodem flash must be loaded.
1922                  *  If it is 2 it is a "socketed" version. */
1923                 if (dev->revision == 1) {
1924                         rcktpt_type[i] = ROCKET_TYPE_MODEMII;
1925                         rocketModel[i].loadrm2 = 1;
1926                 } else {
1927                         rcktpt_type[i] = ROCKET_TYPE_MODEM;
1928                 }
1929
1930                 rocketModel[i].model = MODEL_RP6M;
1931                 strcpy(rocketModel[i].modelString, "RocketModem 6 port");
1932                 rocketModel[i].numPorts = 6;
1933                 break;
1934         case PCI_DEVICE_ID_RP4M:
1935                 max_num_aiops = 1;
1936                 ports_per_aiop = 4;
1937                 if (dev->revision == 1) {
1938                         rcktpt_type[i] = ROCKET_TYPE_MODEMII;
1939                         rocketModel[i].loadrm2 = 1;
1940                 } else {
1941                         rcktpt_type[i] = ROCKET_TYPE_MODEM;
1942                 }
1943
1944                 rocketModel[i].model = MODEL_RP4M;
1945                 strcpy(rocketModel[i].modelString, "RocketModem 4 port");
1946                 rocketModel[i].numPorts = 4;
1947                 break;
1948         default:
1949                 max_num_aiops = 0;
1950                 break;
1951         }
1952
1953         /*
1954          * Check for UPCI boards.
1955          */
1956
1957         switch (dev->device) {
1958         case PCI_DEVICE_ID_URP32INTF:
1959         case PCI_DEVICE_ID_URP8INTF:
1960         case PCI_DEVICE_ID_URP16INTF:
1961         case PCI_DEVICE_ID_CRP16INTF:
1962         case PCI_DEVICE_ID_URP8OCTA:
1963                 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
1964                 ConfigIO = pci_resource_start(dev, 1);
1965                 if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
1966                         UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
1967
1968                         /*
1969                          * Check for octa or quad cable.
1970                          */
1971                         if (!
1972                             (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
1973                              PCI_GPIO_CTRL_8PORT)) {
1974                                 ports_per_aiop = 4;
1975                                 rocketModel[i].numPorts = 4;
1976                         }
1977                 }
1978                 break;
1979         case PCI_DEVICE_ID_UPCI_RM3_8PORT:
1980                 max_num_aiops = 1;
1981                 rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
1982                 strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
1983                 rocketModel[i].numPorts = 8;
1984                 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
1985                 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
1986                 ConfigIO = pci_resource_start(dev, 1);
1987                 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
1988                 break;
1989         case PCI_DEVICE_ID_UPCI_RM3_4PORT:
1990                 max_num_aiops = 1;
1991                 rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
1992                 strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
1993                 rocketModel[i].numPorts = 4;
1994                 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
1995                 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
1996                 ConfigIO = pci_resource_start(dev, 1);
1997                 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
1998                 break;
1999         default:
2000                 break;
2001         }
2002
2003         if (fast_clock) {
2004                 sClockPrescale = 0x12;  /* mod 2 (divide by 3) */
2005                 rp_baud_base[i] = 921600;
2006         } else {
2007                 /*
2008                  * If support_low_speed is set, use the slow clock
2009                  * prescale, which supports 50 bps
2010                  */
2011                 if (support_low_speed) {
2012                         /* mod 9 (divide by 10) prescale */
2013                         sClockPrescale = 0x19;
2014                         rp_baud_base[i] = 230400;
2015                 } else {
2016                         /* mod 4 (divide by 5) prescale */
2017                         sClockPrescale = 0x14;
2018                         rp_baud_base[i] = 460800;
2019                 }
2020         }
2021
2022         for (aiop = 0; aiop < max_num_aiops; aiop++)
2023                 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
2024         ctlp = sCtlNumToCtlPtr(i);
2025         num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
2026         for (aiop = 0; aiop < max_num_aiops; aiop++)
2027                 ctlp->AiopNumChan[aiop] = ports_per_aiop;
2028
2029         dev_info(&dev->dev, "comtrol PCI controller #%d found at "
2030                 "address %04lx, %d AIOP(s) (%s), creating ttyR%d - %ld\n",
2031                 i, rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString,
2032                 rocketModel[i].startingPortNumber,
2033                 rocketModel[i].startingPortNumber + rocketModel[i].numPorts-1);
2034
2035         if (num_aiops <= 0) {
2036                 rcktpt_io_addr[i] = 0;
2037                 return (0);
2038         }
2039         is_PCI[i] = 1;
2040
2041         /*  Reset the AIOPIC, init the serial ports */
2042         for (aiop = 0; aiop < num_aiops; aiop++) {
2043                 sResetAiopByNum(ctlp, aiop);
2044                 num_chan = ports_per_aiop;
2045                 for (chan = 0; chan < num_chan; chan++)
2046                         init_r_port(i, aiop, chan, dev);
2047         }
2048
2049         /*  Rocket modems must be reset */
2050         if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
2051             (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
2052             (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
2053                 num_chan = ports_per_aiop;
2054                 for (chan = 0; chan < num_chan; chan++)
2055                         sPCIModemReset(ctlp, chan, 1);
2056                 msleep(500);
2057                 for (chan = 0; chan < num_chan; chan++)
2058                         sPCIModemReset(ctlp, chan, 0);
2059                 msleep(500);
2060                 rmSpeakerReset(ctlp, rocketModel[i].model);
2061         }
2062         return (1);
2063 }
2064
2065 /*
2066  *  Probes for PCI cards, inits them if found
2067  *  Input:   board_found = number of ISA boards already found, or the
2068  *           starting board number
2069  *  Returns: Number of PCI boards found
2070  */
2071 static int __init init_PCI(int boards_found)
2072 {
2073         struct pci_dev *dev = NULL;
2074         int count = 0;
2075
2076         /*  Work through the PCI device list, pulling out ours */
2077         while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
2078                 if (register_PCI(count + boards_found, dev))
2079                         count++;
2080         }
2081         return (count);
2082 }
2083
2084 #endif                          /* CONFIG_PCI */
2085
2086 /*
2087  *  Probes for ISA cards
2088  *  Input:   i = the board number to look for
2089  *  Returns: 1 if board found, 0 else
2090  */
2091 static int __init init_ISA(int i)
2092 {
2093         int num_aiops, num_chan = 0, total_num_chan = 0;
2094         int aiop, chan;
2095         unsigned int aiopio[MAX_AIOPS_PER_BOARD];
2096         CONTROLLER_t *ctlp;
2097         char *type_string;
2098
2099         /*  If io_addr is zero, no board configured */
2100         if (rcktpt_io_addr[i] == 0)
2101                 return (0);
2102
2103         /*  Reserve the IO region */
2104         if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
2105                 printk(KERN_ERR "Unable to reserve IO region for configured "
2106                                 "ISA RocketPort at address 0x%lx, board not "
2107                                 "installed...\n", rcktpt_io_addr[i]);
2108                 rcktpt_io_addr[i] = 0;
2109                 return (0);
2110         }
2111
2112         ctlp = sCtlNumToCtlPtr(i);
2113
2114         ctlp->boardType = rcktpt_type[i];
2115
2116         switch (rcktpt_type[i]) {
2117         case ROCKET_TYPE_PC104:
2118                 type_string = "(PC104)";
2119                 break;
2120         case ROCKET_TYPE_MODEM:
2121                 type_string = "(RocketModem)";
2122                 break;
2123         case ROCKET_TYPE_MODEMII:
2124                 type_string = "(RocketModem II)";
2125                 break;
2126         default:
2127                 type_string = "";
2128                 break;
2129         }
2130
2131         /*
2132          * If support_low_speed is set, use the slow clock prescale,
2133          * which supports 50 bps
2134          */
2135         if (support_low_speed) {
2136                 sClockPrescale = 0x19;  /* mod 9 (divide by 10) prescale */
2137                 rp_baud_base[i] = 230400;
2138         } else {
2139                 sClockPrescale = 0x14;  /* mod 4 (divide by 5) prescale */
2140                 rp_baud_base[i] = 460800;
2141         }
2142
2143         for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
2144                 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
2145
2146         num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio,  MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
2147
2148         if (ctlp->boardType == ROCKET_TYPE_PC104) {
2149                 sEnAiop(ctlp, 2);       /* only one AIOPIC, but these */
2150                 sEnAiop(ctlp, 3);       /* CSels used for other stuff */
2151         }
2152
2153         /*  If something went wrong initing the AIOP's release the ISA IO memory */
2154         if (num_aiops <= 0) {
2155                 release_region(rcktpt_io_addr[i], 64);
2156                 rcktpt_io_addr[i] = 0;
2157                 return (0);
2158         }
2159
2160         rocketModel[i].startingPortNumber = nextLineNumber;
2161
2162         for (aiop = 0; aiop < num_aiops; aiop++) {
2163                 sResetAiopByNum(ctlp, aiop);
2164                 sEnAiop(ctlp, aiop);
2165                 num_chan = sGetAiopNumChan(ctlp, aiop);
2166                 total_num_chan += num_chan;
2167                 for (chan = 0; chan < num_chan; chan++)
2168                         init_r_port(i, aiop, chan, NULL);
2169         }
2170         is_PCI[i] = 0;
2171         if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
2172                 num_chan = sGetAiopNumChan(ctlp, 0);
2173                 total_num_chan = num_chan;
2174                 for (chan = 0; chan < num_chan; chan++)
2175                         sModemReset(ctlp, chan, 1);
2176                 msleep(500);
2177                 for (chan = 0; chan < num_chan; chan++)
2178                         sModemReset(ctlp, chan, 0);
2179                 msleep(500);
2180                 strcpy(rocketModel[i].modelString, "RocketModem ISA");
2181         } else {
2182                 strcpy(rocketModel[i].modelString, "RocketPort ISA");
2183         }
2184         rocketModel[i].numPorts = total_num_chan;
2185         rocketModel[i].model = MODEL_ISA;
2186
2187         printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
2188                i, rcktpt_io_addr[i], num_aiops, type_string);
2189
2190         printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2191                rocketModel[i].modelString,
2192                rocketModel[i].startingPortNumber,
2193                rocketModel[i].startingPortNumber +
2194                rocketModel[i].numPorts - 1);
2195
2196         return (1);
2197 }
2198
2199 static const struct tty_operations rocket_ops = {
2200         .open = rp_open,
2201         .close = rp_close,
2202         .write = rp_write,
2203         .put_char = rp_put_char,
2204         .write_room = rp_write_room,
2205         .chars_in_buffer = rp_chars_in_buffer,
2206         .flush_buffer = rp_flush_buffer,
2207         .ioctl = rp_ioctl,
2208         .throttle = rp_throttle,
2209         .unthrottle = rp_unthrottle,
2210         .set_termios = rp_set_termios,
2211         .stop = rp_stop,
2212         .start = rp_start,
2213         .hangup = rp_hangup,
2214         .break_ctl = rp_break,
2215         .send_xchar = rp_send_xchar,
2216         .wait_until_sent = rp_wait_until_sent,
2217         .tiocmget = rp_tiocmget,
2218         .tiocmset = rp_tiocmset,
2219 };
2220
2221 static const struct tty_port_operations rocket_port_ops = {
2222         .carrier_raised = carrier_raised,
2223         .dtr_rts = dtr_rts,
2224 };
2225
2226 /*
2227  * The module "startup" routine; it's run when the module is loaded.
2228  */
2229 static int __init rp_init(void)
2230 {
2231         int ret = -ENOMEM, pci_boards_found, isa_boards_found, i;
2232
2233         printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
2234                ROCKET_VERSION, ROCKET_DATE);
2235
2236         rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
2237         if (!rocket_driver)
2238                 goto err;
2239
2240         /*
2241          *  If board 1 is non-zero, there is at least one ISA configured.  If controller is
2242          *  zero, use the default controller IO address of board1 + 0x40.
2243          */
2244         if (board1) {
2245                 if (controller == 0)
2246                         controller = board1 + 0x40;
2247         } else {
2248                 controller = 0;  /*  Used as a flag, meaning no ISA boards */
2249         }
2250
2251         /*  If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
2252         if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
2253                 printk(KERN_ERR "Unable to reserve IO region for first "
2254                         "configured ISA RocketPort controller 0x%lx.  "
2255                         "Driver exiting\n", controller);
2256                 ret = -EBUSY;
2257                 goto err_tty;
2258         }
2259
2260         /*  Store ISA variable retrieved from command line or .conf file. */
2261         rcktpt_io_addr[0] = board1;
2262         rcktpt_io_addr[1] = board2;
2263         rcktpt_io_addr[2] = board3;
2264         rcktpt_io_addr[3] = board4;
2265
2266         rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2267         rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
2268         rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2269         rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
2270         rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2271         rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
2272         rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2273         rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
2274
2275         /*
2276          * Set up the tty driver structure and then register this
2277          * driver with the tty layer.
2278          */
2279
2280         rocket_driver->owner = THIS_MODULE;
2281         rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV;
2282         rocket_driver->name = "ttyR";
2283         rocket_driver->driver_name = "Comtrol RocketPort";
2284         rocket_driver->major = TTY_ROCKET_MAJOR;
2285         rocket_driver->minor_start = 0;
2286         rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
2287         rocket_driver->subtype = SERIAL_TYPE_NORMAL;
2288         rocket_driver->init_termios = tty_std_termios;
2289         rocket_driver->init_termios.c_cflag =
2290             B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2291         rocket_driver->init_termios.c_ispeed = 9600;
2292         rocket_driver->init_termios.c_ospeed = 9600;
2293 #ifdef ROCKET_SOFT_FLOW
2294         rocket_driver->flags |= TTY_DRIVER_REAL_RAW;
2295 #endif
2296         tty_set_operations(rocket_driver, &rocket_ops);
2297
2298         ret = tty_register_driver(rocket_driver);
2299         if (ret < 0) {
2300                 printk(KERN_ERR "Couldn't install tty RocketPort driver\n");
2301                 goto err_controller;
2302         }
2303
2304 #ifdef ROCKET_DEBUG_OPEN
2305         printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
2306 #endif
2307
2308         /*
2309          *  OK, let's probe each of the controllers looking for boards.  Any boards found
2310          *  will be initialized here.
2311          */
2312         isa_boards_found = 0;
2313         pci_boards_found = 0;
2314
2315         for (i = 0; i < NUM_BOARDS; i++) {
2316                 if (init_ISA(i))
2317                         isa_boards_found++;
2318         }
2319
2320 #ifdef CONFIG_PCI
2321         if (isa_boards_found < NUM_BOARDS)
2322                 pci_boards_found = init_PCI(isa_boards_found);
2323 #endif
2324
2325         max_board = pci_boards_found + isa_boards_found;
2326
2327         if (max_board == 0) {
2328                 printk(KERN_ERR "No rocketport ports found; unloading driver\n");
2329                 ret = -ENXIO;
2330                 goto err_ttyu;
2331         }
2332
2333         return 0;
2334 err_ttyu:
2335         tty_unregister_driver(rocket_driver);
2336 err_controller:
2337         if (controller)
2338                 release_region(controller, 4);
2339 err_tty:
2340         put_tty_driver(rocket_driver);
2341 err:
2342         return ret;
2343 }
2344
2345
2346 static void rp_cleanup_module(void)
2347 {
2348         int retval;
2349         int i;
2350
2351         del_timer_sync(&rocket_timer);
2352
2353         retval = tty_unregister_driver(rocket_driver);
2354         if (retval)
2355                 printk(KERN_ERR "Error %d while trying to unregister "
2356                        "rocketport driver\n", -retval);
2357
2358         for (i = 0; i < MAX_RP_PORTS; i++)
2359                 if (rp_table[i]) {
2360                         tty_unregister_device(rocket_driver, i);
2361                         kfree(rp_table[i]);
2362                 }
2363
2364         put_tty_driver(rocket_driver);
2365
2366         for (i = 0; i < NUM_BOARDS; i++) {
2367                 if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
2368                         continue;
2369                 release_region(rcktpt_io_addr[i], 64);
2370         }
2371         if (controller)
2372                 release_region(controller, 4);
2373 }
2374
2375 /***************************************************************************
2376 Function: sInitController
2377 Purpose:  Initialization of controller global registers and controller
2378           structure.
2379 Call:     sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
2380                           IRQNum,Frequency,PeriodicOnly)
2381           CONTROLLER_T *CtlP; Ptr to controller structure
2382           int CtlNum; Controller number
2383           ByteIO_t MudbacIO; Mudbac base I/O address.
2384           ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2385              This list must be in the order the AIOPs will be found on the
2386              controller.  Once an AIOP in the list is not found, it is
2387              assumed that there are no more AIOPs on the controller.
2388           int AiopIOListSize; Number of addresses in AiopIOList
2389           int IRQNum; Interrupt Request number.  Can be any of the following:
2390                          0: Disable global interrupts
2391                          3: IRQ 3
2392                          4: IRQ 4
2393                          5: IRQ 5
2394                          9: IRQ 9
2395                          10: IRQ 10
2396                          11: IRQ 11
2397                          12: IRQ 12
2398                          15: IRQ 15
2399           Byte_t Frequency: A flag identifying the frequency
2400                    of the periodic interrupt, can be any one of the following:
2401                       FREQ_DIS - periodic interrupt disabled
2402                       FREQ_137HZ - 137 Hertz
2403                       FREQ_69HZ - 69 Hertz
2404                       FREQ_34HZ - 34 Hertz
2405                       FREQ_17HZ - 17 Hertz
2406                       FREQ_9HZ - 9 Hertz
2407                       FREQ_4HZ - 4 Hertz
2408                    If IRQNum is set to 0 the Frequency parameter is
2409                    overidden, it is forced to a value of FREQ_DIS.
2410           int PeriodicOnly: 1 if all interrupts except the periodic
2411                                interrupt are to be blocked.
2412                             0 is both the periodic interrupt and
2413                                other channel interrupts are allowed.
2414                             If IRQNum is set to 0 the PeriodicOnly parameter is
2415                                overidden, it is forced to a value of 0.
2416 Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
2417                initialization failed.
2418
2419 Comments:
2420           If periodic interrupts are to be disabled but AIOP interrupts
2421           are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
2422
2423           If interrupts are to be completely disabled set IRQNum to 0.
2424
2425           Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
2426           invalid combination.
2427
2428           This function performs initialization of global interrupt modes,
2429           but it does not actually enable global interrupts.  To enable
2430           and disable global interrupts use functions sEnGlobalInt() and
2431           sDisGlobalInt().  Enabling of global interrupts is normally not
2432           done until all other initializations are complete.
2433
2434           Even if interrupts are globally enabled, they must also be
2435           individually enabled for each channel that is to generate
2436           interrupts.
2437
2438 Warnings: No range checking on any of the parameters is done.
2439
2440           No context switches are allowed while executing this function.
2441
2442           After this function all AIOPs on the controller are disabled,
2443           they can be enabled with sEnAiop().
2444 */
2445 static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
2446                            ByteIO_t * AiopIOList, int AiopIOListSize,
2447                            int IRQNum, Byte_t Frequency, int PeriodicOnly)
2448 {
2449         int i;
2450         ByteIO_t io;
2451         int done;
2452
2453         CtlP->AiopIntrBits = aiop_intr_bits;
2454         CtlP->AltChanRingIndicator = 0;
2455         CtlP->CtlNum = CtlNum;
2456         CtlP->CtlID = CTLID_0001;       /* controller release 1 */
2457         CtlP->BusType = isISA;
2458         CtlP->MBaseIO = MudbacIO;
2459         CtlP->MReg1IO = MudbacIO + 1;
2460         CtlP->MReg2IO = MudbacIO + 2;
2461         CtlP->MReg3IO = MudbacIO + 3;
2462 #if 1
2463         CtlP->MReg2 = 0;        /* interrupt disable */
2464         CtlP->MReg3 = 0;        /* no periodic interrupts */
2465 #else
2466         if (sIRQMap[IRQNum] == 0) {     /* interrupts globally disabled */
2467                 CtlP->MReg2 = 0;        /* interrupt disable */
2468                 CtlP->MReg3 = 0;        /* no periodic interrupts */
2469         } else {
2470                 CtlP->MReg2 = sIRQMap[IRQNum];  /* set IRQ number */
2471                 CtlP->MReg3 = Frequency;        /* set frequency */
2472                 if (PeriodicOnly) {     /* periodic interrupt only */
2473                         CtlP->MReg3 |= PERIODIC_ONLY;
2474                 }
2475         }
2476 #endif
2477         sOutB(CtlP->MReg2IO, CtlP->MReg2);
2478         sOutB(CtlP->MReg3IO, CtlP->MReg3);
2479         sControllerEOI(CtlP);   /* clear EOI if warm init */
2480         /* Init AIOPs */
2481         CtlP->NumAiop = 0;
2482         for (i = done = 0; i < AiopIOListSize; i++) {
2483                 io = AiopIOList[i];
2484                 CtlP->AiopIO[i] = (WordIO_t) io;
2485                 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2486                 sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */
2487                 sOutB(MudbacIO, (Byte_t) (io >> 6));    /* set up AIOP I/O in MUDBAC */
2488                 if (done)
2489                         continue;
2490                 sEnAiop(CtlP, i);       /* enable the AIOP */
2491                 CtlP->AiopID[i] = sReadAiopID(io);      /* read AIOP ID */
2492                 if (CtlP->AiopID[i] == AIOPID_NULL)     /* if AIOP does not exist */
2493                         done = 1;       /* done looking for AIOPs */
2494                 else {
2495                         CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2496                         sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);    /* clock prescaler */
2497                         sOutB(io + _INDX_DATA, sClockPrescale);
2498                         CtlP->NumAiop++;        /* bump count of AIOPs */
2499                 }
2500                 sDisAiop(CtlP, i);      /* disable AIOP */
2501         }
2502
2503         if (CtlP->NumAiop == 0)
2504                 return (-1);
2505         else
2506                 return (CtlP->NumAiop);
2507 }
2508
2509 /***************************************************************************
2510 Function: sPCIInitController
2511 Purpose:  Initialization of controller global registers and controller
2512           structure.
2513 Call:     sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
2514                           IRQNum,Frequency,PeriodicOnly)
2515           CONTROLLER_T *CtlP; Ptr to controller structure
2516           int CtlNum; Controller number
2517           ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2518              This list must be in the order the AIOPs will be found on the
2519              controller.  Once an AIOP in the list is not found, it is
2520              assumed that there are no more AIOPs on the controller.
2521           int AiopIOListSize; Number of addresses in AiopIOList
2522           int IRQNum; Interrupt Request number.  Can be any of the following:
2523                          0: Disable global interrupts
2524                          3: IRQ 3
2525                          4: IRQ 4
2526                          5: IRQ 5
2527                          9: IRQ 9
2528                          10: IRQ 10
2529                          11: IRQ 11
2530                          12: IRQ 12
2531                          15: IRQ 15
2532           Byte_t Frequency: A flag identifying the frequency
2533                    of the periodic interrupt, can be any one of the following:
2534                       FREQ_DIS - periodic interrupt disabled
2535                       FREQ_137HZ - 137 Hertz
2536                       FREQ_69HZ - 69 Hertz
2537                       FREQ_34HZ - 34 Hertz
2538                       FREQ_17HZ - 17 Hertz
2539                       FREQ_9HZ - 9 Hertz
2540                       FREQ_4HZ - 4 Hertz
2541                    If IRQNum is set to 0 the Frequency parameter is
2542                    overidden, it is forced to a value of FREQ_DIS.
2543           int PeriodicOnly: 1 if all interrupts except the periodic
2544                                interrupt are to be blocked.
2545                             0 is both the periodic interrupt and
2546                                other channel interrupts are allowed.
2547                             If IRQNum is set to 0 the PeriodicOnly parameter is
2548                                overidden, it is forced to a value of 0.
2549 Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
2550                initialization failed.
2551
2552 Comments:
2553           If periodic interrupts are to be disabled but AIOP interrupts
2554           are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
2555
2556           If interrupts are to be completely disabled set IRQNum to 0.
2557
2558           Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
2559           invalid combination.
2560
2561           This function performs initialization of global interrupt modes,
2562           but it does not actually enable global interrupts.  To enable
2563           and disable global interrupts use functions sEnGlobalInt() and
2564           sDisGlobalInt().  Enabling of global interrupts is normally not
2565           done until all other initializations are complete.
2566
2567           Even if interrupts are globally enabled, they must also be
2568           individually enabled for each channel that is to generate
2569           interrupts.
2570
2571 Warnings: No range checking on any of the parameters is done.
2572
2573           No context switches are allowed while executing this function.
2574
2575           After this function all AIOPs on the controller are disabled,
2576           they can be enabled with sEnAiop().
2577 */
2578 static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
2579                               ByteIO_t * AiopIOList, int AiopIOListSize,
2580                               WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
2581                               int PeriodicOnly, int altChanRingIndicator,
2582                               int UPCIRingInd)
2583 {
2584         int i;
2585         ByteIO_t io;
2586
2587         CtlP->AltChanRingIndicator = altChanRingIndicator;
2588         CtlP->UPCIRingInd = UPCIRingInd;
2589         CtlP->CtlNum = CtlNum;
2590         CtlP->CtlID = CTLID_0001;       /* controller release 1 */
2591         CtlP->BusType = isPCI;  /* controller release 1 */
2592
2593         if (ConfigIO) {
2594                 CtlP->isUPCI = 1;
2595                 CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
2596                 CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
2597                 CtlP->AiopIntrBits = upci_aiop_intr_bits;
2598         } else {
2599                 CtlP->isUPCI = 0;
2600                 CtlP->PCIIO =
2601                     (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
2602                 CtlP->AiopIntrBits = aiop_intr_bits;
2603         }
2604
2605         sPCIControllerEOI(CtlP);        /* clear EOI if warm init */
2606         /* Init AIOPs */
2607         CtlP->NumAiop = 0;
2608         for (i = 0; i < AiopIOListSize; i++) {
2609                 io = AiopIOList[i];
2610                 CtlP->AiopIO[i] = (WordIO_t) io;
2611                 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2612
2613                 CtlP->AiopID[i] = sReadAiopID(io);      /* read AIOP ID */
2614                 if (CtlP->AiopID[i] == AIOPID_NULL)     /* if AIOP does not exist */
2615                         break;  /* done looking for AIOPs */
2616
2617                 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2618                 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE);    /* clock prescaler */
2619                 sOutB(io + _INDX_DATA, sClockPrescale);
2620                 CtlP->NumAiop++;        /* bump count of AIOPs */
2621         }
2622
2623         if (CtlP->NumAiop == 0)
2624                 return (-1);
2625         else
2626                 return (CtlP->NumAiop);
2627 }
2628
2629 /***************************************************************************
2630 Function: sReadAiopID
2631 Purpose:  Read the AIOP idenfication number directly from an AIOP.
2632 Call:     sReadAiopID(io)
2633           ByteIO_t io: AIOP base I/O address
2634 Return:   int: Flag AIOPID_XXXX if a valid AIOP is found, where X
2635                  is replace by an identifying number.
2636           Flag AIOPID_NULL if no valid AIOP is found
2637 Warnings: No context switches are allowed while executing this function.
2638
2639 */
2640 static int sReadAiopID(ByteIO_t io)
2641 {
2642         Byte_t AiopID;          /* ID byte from AIOP */
2643
2644         sOutB(io + _CMD_REG, RESET_ALL);        /* reset AIOP */
2645         sOutB(io + _CMD_REG, 0x0);
2646         AiopID = sInW(io + _CHN_STAT0) & 0x07;
2647         if (AiopID == 0x06)
2648                 return (1);
2649         else                    /* AIOP does not exist */
2650                 return (-1);
2651 }
2652
2653 /***************************************************************************
2654 Function: sReadAiopNumChan
2655 Purpose:  Read the number of channels available in an AIOP directly from
2656           an AIOP.
2657 Call:     sReadAiopNumChan(io)
2658           WordIO_t io: AIOP base I/O address
2659 Return:   int: The number of channels available
2660 Comments: The number of channels is determined by write/reads from identical
2661           offsets within the SRAM address spaces for channels 0 and 4.
2662           If the channel 4 space is mirrored to channel 0 it is a 4 channel
2663           AIOP, otherwise it is an 8 channel.
2664 Warnings: No context switches are allowed while executing this function.
2665 */
2666 static int sReadAiopNumChan(WordIO_t io)
2667 {
2668         Word_t x;
2669         static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
2670
2671         /* write to chan 0 SRAM */
2672         out32((DWordIO_t) io + _INDX_ADDR, R);
2673         sOutW(io + _INDX_ADDR, 0);      /* read from SRAM, chan 0 */
2674         x = sInW(io + _INDX_DATA);
2675         sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */
2676         if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */
2677                 return (8);
2678         else
2679                 return (4);
2680 }
2681
2682 /***************************************************************************
2683 Function: sInitChan
2684 Purpose:  Initialization of a channel and channel structure
2685 Call:     sInitChan(CtlP,ChP,AiopNum,ChanNum)
2686           CONTROLLER_T *CtlP; Ptr to controller structure
2687           CHANNEL_T *ChP; Ptr to channel structure
2688           int AiopNum; AIOP number within controller
2689           int ChanNum; Channel number within AIOP
2690 Return:   int: 1 if initialization succeeded, 0 if it fails because channel
2691                number exceeds number of channels available in AIOP.
2692 Comments: This function must be called before a channel can be used.
2693 Warnings: No range checking on any of the parameters is done.
2694
2695           No context switches are allowed while executing this function.
2696 */
2697 static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
2698                      int ChanNum)
2699 {
2700         int i;
2701         WordIO_t AiopIO;
2702         WordIO_t ChIOOff;
2703         Byte_t *ChR;
2704         Word_t ChOff;
2705         static Byte_t R[4];
2706         int brd9600;
2707
2708         if (ChanNum >= CtlP->AiopNumChan[AiopNum])
2709                 return 0;       /* exceeds num chans in AIOP */
2710
2711         /* Channel, AIOP, and controller identifiers */
2712         ChP->CtlP = CtlP;
2713         ChP->ChanID = CtlP->AiopID[AiopNum];
2714         ChP->AiopNum = AiopNum;
2715         ChP->ChanNum = ChanNum;
2716
2717         /* Global direct addresses */
2718         AiopIO = CtlP->AiopIO[AiopNum];
2719         ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
2720         ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
2721         ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
2722         ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
2723         ChP->IndexData = AiopIO + _INDX_DATA;
2724
2725         /* Channel direct addresses */
2726         ChIOOff = AiopIO + ChP->ChanNum * 2;
2727         ChP->TxRxData = ChIOOff + _TD0;
2728         ChP->ChanStat = ChIOOff + _CHN_STAT0;
2729         ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
2730         ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
2731
2732         /* Initialize the channel from the RData array */
2733         for (i = 0; i < RDATASIZE; i += 4) {
2734                 R[0] = RData[i];
2735                 R[1] = RData[i + 1] + 0x10 * ChanNum;
2736                 R[2] = RData[i + 2];
2737                 R[3] = RData[i + 3];
2738                 out32(ChP->IndexAddr, R);
2739         }
2740
2741         ChR = ChP->R;
2742         for (i = 0; i < RREGDATASIZE; i += 4) {
2743                 ChR[i] = RRegData[i];
2744                 ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
2745                 ChR[i + 2] = RRegData[i + 2];
2746                 ChR[i + 3] = RRegData[i + 3];
2747         }
2748
2749         /* Indexed registers */
2750         ChOff = (Word_t) ChanNum *0x1000;
2751
2752         if (sClockPrescale == 0x14)
2753                 brd9600 = 47;
2754         else
2755                 brd9600 = 23;
2756
2757         ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
2758         ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
2759         ChP->BaudDiv[2] = (Byte_t) brd9600;
2760         ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
2761         out32(ChP->IndexAddr, ChP->BaudDiv);
2762
2763         ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
2764         ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
2765         ChP->TxControl[2] = 0;
2766         ChP->TxControl[3] = 0;
2767         out32(ChP->IndexAddr, ChP->TxControl);
2768
2769         ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
2770         ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
2771         ChP->RxControl[2] = 0;
2772         ChP->RxControl[3] = 0;
2773         out32(ChP->IndexAddr, ChP->RxControl);
2774
2775         ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
2776         ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
2777         ChP->TxEnables[2] = 0;
2778         ChP->TxEnables[3] = 0;
2779         out32(ChP->IndexAddr, ChP->TxEnables);
2780
2781         ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
2782         ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
2783         ChP->TxCompare[2] = 0;
2784         ChP->TxCompare[3] = 0;
2785         out32(ChP->IndexAddr, ChP->TxCompare);
2786
2787         ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
2788         ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
2789         ChP->TxReplace1[2] = 0;
2790         ChP->TxReplace1[3] = 0;
2791         out32(ChP->IndexAddr, ChP->TxReplace1);
2792
2793         ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
2794         ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
2795         ChP->TxReplace2[2] = 0;
2796         ChP->TxReplace2[3] = 0;
2797         out32(ChP->IndexAddr, ChP->TxReplace2);
2798
2799         ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
2800         ChP->TxFIFO = ChOff + _TX_FIFO;
2801
2802         sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT);  /* apply reset Tx FIFO count */
2803         sOutB(ChP->Cmd, (Byte_t) ChanNum);      /* remove reset Tx FIFO count */
2804         sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs);      /* clear Tx in/out ptrs */
2805         sOutW(ChP->IndexData, 0);
2806         ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
2807         ChP->RxFIFO = ChOff + _RX_FIFO;
2808
2809         sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT);  /* apply reset Rx FIFO count */
2810         sOutB(ChP->Cmd, (Byte_t) ChanNum);      /* remove reset Rx FIFO count */
2811         sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs);      /* clear Rx out ptr */
2812         sOutW(ChP->IndexData, 0);
2813         sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2);  /* clear Rx in ptr */
2814         sOutW(ChP->IndexData, 0);
2815         ChP->TxPrioCnt = ChOff + _TXP_CNT;
2816         sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
2817         sOutB(ChP->IndexData, 0);
2818         ChP->TxPrioPtr = ChOff + _TXP_PNTR;
2819         sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
2820         sOutB(ChP->IndexData, 0);
2821         ChP->TxPrioBuf = ChOff + _TXP_BUF;
2822         sEnRxProcessor(ChP);    /* start the Rx processor */
2823
2824         return 1;
2825 }
2826
2827 /***************************************************************************
2828 Function: sStopRxProcessor
2829 Purpose:  Stop the receive processor from processing a channel.
2830 Call:     sStopRxProcessor(ChP)
2831           CHANNEL_T *ChP; Ptr to channel structure
2832
2833 Comments: The receive processor can be started again with sStartRxProcessor().
2834           This function causes the receive processor to skip over the
2835           stopped channel.  It does not stop it from processing other channels.
2836
2837 Warnings: No context switches are allowed while executing this function.
2838
2839           Do not leave the receive processor stopped for more than one
2840           character time.
2841
2842           After calling this function a delay of 4 uS is required to ensure
2843           that the receive processor is no longer processing this channel.
2844 */
2845 static void sStopRxProcessor(CHANNEL_T * ChP)
2846 {
2847         Byte_t R[4];
2848
2849         R[0] = ChP->R[0];
2850         R[1] = ChP->R[1];
2851         R[2] = 0x0a;
2852         R[3] = ChP->R[3];
2853         out32(ChP->IndexAddr, R);
2854 }
2855
2856 /***************************************************************************
2857 Function: sFlushRxFIFO
2858 Purpose:  Flush the Rx FIFO
2859 Call:     sFlushRxFIFO(ChP)
2860           CHANNEL_T *ChP; Ptr to channel structure
2861 Return:   void
2862 Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2863           while it is being flushed the receive processor is stopped
2864           and the transmitter is disabled.  After these operations a
2865           4 uS delay is done before clearing the pointers to allow
2866           the receive processor to stop.  These items are handled inside
2867           this function.
2868 Warnings: No context switches are allowed while executing this function.
2869 */
2870 static void sFlushRxFIFO(CHANNEL_T * ChP)
2871 {
2872         int i;
2873         Byte_t Ch;              /* channel number within AIOP */
2874         int RxFIFOEnabled;      /* 1 if Rx FIFO enabled */
2875
2876         if (sGetRxCnt(ChP) == 0)        /* Rx FIFO empty */
2877                 return;         /* don't need to flush */
2878
2879         RxFIFOEnabled = 0;
2880         if (ChP->R[0x32] == 0x08) {     /* Rx FIFO is enabled */
2881                 RxFIFOEnabled = 1;
2882                 sDisRxFIFO(ChP);        /* disable it */
2883                 for (i = 0; i < 2000 / 200; i++)        /* delay 2 uS to allow proc to disable FIFO */
2884                         sInB(ChP->IntChan);     /* depends on bus i/o timing */
2885         }
2886         sGetChanStatus(ChP);    /* clear any pending Rx errors in chan stat */
2887         Ch = (Byte_t) sGetChanNum(ChP);
2888         sOutB(ChP->Cmd, Ch | RESRXFCNT);        /* apply reset Rx FIFO count */
2889         sOutB(ChP->Cmd, Ch);    /* remove reset Rx FIFO count */
2890         sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs);      /* clear Rx out ptr */
2891         sOutW(ChP->IndexData, 0);
2892         sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2);  /* clear Rx in ptr */
2893         sOutW(ChP->IndexData, 0);
2894         if (RxFIFOEnabled)
2895                 sEnRxFIFO(ChP); /* enable Rx FIFO */
2896 }
2897
2898 /***************************************************************************
2899 Function: sFlushTxFIFO
2900 Purpose:  Flush the Tx FIFO
2901 Call:     sFlushTxFIFO(ChP)
2902           CHANNEL_T *ChP; Ptr to channel structure
2903 Return:   void
2904 Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2905           while it is being flushed the receive processor is stopped
2906           and the transmitter is disabled.  After these operations a
2907           4 uS delay is done before clearing the pointers to allow
2908           the receive processor to stop.  These items are handled inside
2909           this function.
2910 Warnings: No context switches are allowed while executing this function.
2911 */
2912 static void sFlushTxFIFO(CHANNEL_T * ChP)
2913 {
2914         int i;
2915         Byte_t Ch;              /* channel number within AIOP */
2916         int TxEnabled;          /* 1 if transmitter enabled */
2917
2918         if (sGetTxCnt(ChP) == 0)        /* Tx FIFO empty */
2919                 return;         /* don't need to flush */
2920
2921         TxEnabled = 0;
2922         if (ChP->TxControl[3] & TX_ENABLE) {
2923                 TxEnabled = 1;
2924                 sDisTransmit(ChP);      /* disable transmitter */
2925         }
2926         sStopRxProcessor(ChP);  /* stop Rx processor */
2927         for (i = 0; i < 4000 / 200; i++)        /* delay 4 uS to allow proc to stop */
2928                 sInB(ChP->IntChan);     /* depends on bus i/o timing */
2929         Ch = (Byte_t) sGetChanNum(ChP);
2930         sOutB(ChP->Cmd, Ch | RESTXFCNT);        /* apply reset Tx FIFO count */
2931         sOutB(ChP->Cmd, Ch);    /* remove reset Tx FIFO count */
2932         sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs);      /* clear Tx in/out ptrs */
2933         sOutW(ChP->IndexData, 0);
2934         if (TxEnabled)
2935                 sEnTransmit(ChP);       /* enable transmitter */
2936         sStartRxProcessor(ChP); /* restart Rx processor */
2937 }
2938
2939 /***************************************************************************
2940 Function: sWriteTxPrioByte
2941 Purpose:  Write a byte of priority transmit data to a channel
2942 Call:     sWriteTxPrioByte(ChP,Data)
2943           CHANNEL_T *ChP; Ptr to channel structure
2944           Byte_t Data; The transmit data byte
2945
2946 Return:   int: 1 if the bytes is successfully written, otherwise 0.
2947
2948 Comments: The priority byte is transmitted before any data in the Tx FIFO.
2949
2950 Warnings: No context switches are allowed while executing this function.
2951 */
2952 static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
2953 {
2954         Byte_t DWBuf[4];        /* buffer for double word writes */
2955         Word_t *WordPtr;        /* must be far because Win SS != DS */
2956         register DWordIO_t IndexAddr;
2957
2958         if (sGetTxCnt(ChP) > 1) {       /* write it to Tx priority buffer */
2959                 IndexAddr = ChP->IndexAddr;
2960                 sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt);    /* get priority buffer status */
2961                 if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */
2962                         return (0);     /* nothing sent */
2963
2964                 WordPtr = (Word_t *) (&DWBuf[0]);
2965                 *WordPtr = ChP->TxPrioBuf;      /* data byte address */
2966
2967                 DWBuf[2] = Data;        /* data byte value */
2968                 out32(IndexAddr, DWBuf);        /* write it out */
2969
2970                 *WordPtr = ChP->TxPrioCnt;      /* Tx priority count address */
2971
2972                 DWBuf[2] = PRI_PEND + 1;        /* indicate 1 byte pending */
2973                 DWBuf[3] = 0;   /* priority buffer pointer */
2974                 out32(IndexAddr, DWBuf);        /* write it out */
2975         } else {                /* write it to Tx FIFO */
2976
2977                 sWriteTxByte(sGetTxRxDataIO(ChP), Data);
2978         }
2979         return (1);             /* 1 byte sent */
2980 }
2981
2982 /***************************************************************************
2983 Function: sEnInterrupts
2984 Purpose:  Enable one or more interrupts for a channel
2985 Call:     sEnInterrupts(ChP,Flags)
2986           CHANNEL_T *ChP; Ptr to channel structure
2987           Word_t Flags: Interrupt enable flags, can be any combination
2988              of the following flags:
2989                 TXINT_EN:   Interrupt on Tx FIFO empty
2990                 RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
2991                             sSetRxTrigger())
2992                 SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
2993                 MCINT_EN:   Interrupt on modem input change
2994                 CHANINT_EN: Allow channel interrupt signal to the AIOP's
2995                             Interrupt Channel Register.
2996 Return:   void
2997 Comments: If an interrupt enable flag is set in Flags, that interrupt will be
2998           enabled.  If an interrupt enable flag is not set in Flags, that
2999           interrupt will not be changed.  Interrupts can be disabled with
3000           function sDisInterrupts().
3001
3002           This function sets the appropriate bit for the channel in the AIOP's
3003           Interrupt Mask Register if the CHANINT_EN flag is set.  This allows
3004           this channel's bit to be set in the AIOP's Interrupt Channel Register.
3005
3006           Interrupts must also be globally enabled before channel interrupts
3007           will be passed on to the host.  This is done with function
3008           sEnGlobalInt().
3009
3010           In some cases it may be desirable to disable interrupts globally but
3011           enable channel interrupts.  This would allow the global interrupt
3012           status register to be used to determine which AIOPs need service.
3013 */
3014 static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
3015 {
3016         Byte_t Mask;            /* Interrupt Mask Register */
3017
3018         ChP->RxControl[2] |=
3019             ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3020
3021         out32(ChP->IndexAddr, ChP->RxControl);
3022
3023         ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
3024
3025         out32(ChP->IndexAddr, ChP->TxControl);
3026
3027         if (Flags & CHANINT_EN) {
3028                 Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
3029                 sOutB(ChP->IntMask, Mask);
3030         }
3031 }
3032
3033 /***************************************************************************
3034 Function: sDisInterrupts
3035 Purpose:  Disable one or more interrupts for a channel
3036 Call:     sDisInterrupts(ChP,Flags)
3037           CHANNEL_T *ChP; Ptr to channel structure
3038           Word_t Flags: Interrupt flags, can be any combination
3039              of the following flags:
3040                 TXINT_EN:   Interrupt on Tx FIFO empty
3041                 RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
3042                             sSetRxTrigger())
3043                 SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
3044                 MCINT_EN:   Interrupt on modem input change
3045                 CHANINT_EN: Disable channel interrupt signal to the
3046                             AIOP's Interrupt Channel Register.
3047 Return:   void
3048 Comments: If an interrupt flag is set in Flags, that interrupt will be
3049           disabled.  If an interrupt flag is not set in Flags, that
3050           interrupt will not be changed.  Interrupts can be enabled with
3051           function sEnInterrupts().
3052
3053           This function clears the appropriate bit for the channel in the AIOP's
3054           Interrupt Mask Register if the CHANINT_EN flag is set.  This blocks
3055           this channel's bit from being set in the AIOP's Interrupt Channel
3056           Register.
3057 */
3058 static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
3059 {
3060         Byte_t Mask;            /* Interrupt Mask Register */
3061
3062         ChP->RxControl[2] &=
3063             ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3064         out32(ChP->IndexAddr, ChP->RxControl);
3065         ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
3066         out32(ChP->IndexAddr, ChP->TxControl);
3067
3068         if (Flags & CHANINT_EN) {
3069                 Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
3070                 sOutB(ChP->IntMask, Mask);
3071         }
3072 }
3073
3074 static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
3075 {
3076         sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
3077 }
3078
3079 /*
3080  *  Not an official SSCI function, but how to reset RocketModems.
3081  *  ISA bus version
3082  */
3083 static void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
3084 {
3085         ByteIO_t addr;
3086         Byte_t val;
3087
3088         addr = CtlP->AiopIO[0] + 0x400;
3089         val = sInB(CtlP->MReg3IO);
3090         /* if AIOP[1] is not enabled, enable it */
3091         if ((val & 2) == 0) {
3092                 val = sInB(CtlP->MReg2IO);
3093                 sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
3094                 sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
3095         }
3096
3097         sEnAiop(CtlP, 1);
3098         if (!on)
3099                 addr += 8;
3100         sOutB(addr + chan, 0);  /* apply or remove reset */
3101         sDisAiop(CtlP, 1);
3102 }
3103
3104 /*
3105  *  Not an official SSCI function, but how to reset RocketModems.
3106  *  PCI bus version
3107  */
3108 static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
3109 {
3110         ByteIO_t addr;
3111
3112         addr = CtlP->AiopIO[0] + 0x40;  /* 2nd AIOP */
3113         if (!on)
3114                 addr += 8;
3115         sOutB(addr + chan, 0);  /* apply or remove reset */
3116 }
3117
3118 /*  Resets the speaker controller on RocketModem II and III devices */
3119 static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
3120 {
3121         ByteIO_t addr;
3122
3123         /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
3124         if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
3125                 addr = CtlP->AiopIO[0] + 0x4F;
3126                 sOutB(addr, 0);
3127         }
3128
3129         /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
3130         if ((model == MODEL_UPCI_RM3_8PORT)
3131             || (model == MODEL_UPCI_RM3_4PORT)) {
3132                 addr = CtlP->AiopIO[0] + 0x88;
3133                 sOutB(addr, 0);
3134         }
3135 }
3136
3137 /*  Returns the line number given the controller (board), aiop and channel number */
3138 static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
3139 {
3140         return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
3141 }
3142
3143 /*
3144  *  Stores the line number associated with a given controller (board), aiop
3145  *  and channel number.
3146  *  Returns:  The line number assigned
3147  */
3148 static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
3149 {
3150         lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
3151         return (nextLineNumber - 1);
3152 }