x86: cache_info: Kill the atomic allocation in amd_init_l3_cache()
[linux-2.6/linux-mips.git] / drivers / tty / serial / 8250_gsc.c
blobd8c0ffbfa6e39b53bafaef22f2d090e2739613e9
1 /*
2 * Serial Device Initialisation for Lasi/Asp/Wax/Dino
4 * (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/errno.h>
13 #include <linux/init.h>
14 #include <linux/interrupt.h>
15 #include <linux/ioport.h>
16 #include <linux/module.h>
17 #include <linux/serial_core.h>
18 #include <linux/signal.h>
19 #include <linux/types.h>
21 #include <asm/hardware.h>
22 #include <asm/parisc-device.h>
23 #include <asm/io.h>
25 #include "8250.h"
27 static int __init serial_init_chip(struct parisc_device *dev)
29 struct uart_port port;
30 unsigned long address;
31 int err;
33 if (!dev->irq) {
34 /* We find some unattached serial ports by walking native
35 * busses. These should be silently ignored. Otherwise,
36 * what we have here is a missing parent device, so tell
37 * the user what they're missing.
39 if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
40 printk(KERN_INFO
41 "Serial: device 0x%llx not configured.\n"
42 "Enable support for Wax, Lasi, Asp or Dino.\n",
43 (unsigned long long)dev->hpa.start);
44 return -ENODEV;
47 address = dev->hpa.start;
48 if (dev->id.sversion != 0x8d)
49 address += 0x800;
51 memset(&port, 0, sizeof(port));
52 port.iotype = UPIO_MEM;
53 /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
54 port.uartclk = 7272727;
55 port.mapbase = address;
56 port.membase = ioremap_nocache(address, 16);
57 port.irq = dev->irq;
58 port.flags = UPF_BOOT_AUTOCONF;
59 port.dev = &dev->dev;
61 err = serial8250_register_port(&port);
62 if (err < 0) {
63 printk(KERN_WARNING
64 "serial8250_register_port returned error %d\n", err);
65 iounmap(port.membase);
66 return err;
69 return 0;
72 static struct parisc_device_id serial_tbl[] = {
73 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 },
74 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c },
75 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d },
76 { 0 }
79 /* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1
80 * attached to Dino. Unfortunately, Dino appears before Lasi in the device
81 * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one
82 * which only knows about Lasi and then a second which will find all the
83 * other serial ports. HPUX ignores this problem.
85 static struct parisc_device_id lasi_tbl[] = {
86 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */
87 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */
88 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */
89 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */
90 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */
91 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */
92 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */
93 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */
94 { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */
95 { 0 }
99 MODULE_DEVICE_TABLE(parisc, serial_tbl);
101 static struct parisc_driver lasi_driver = {
102 .name = "serial_1",
103 .id_table = lasi_tbl,
104 .probe = serial_init_chip,
107 static struct parisc_driver serial_driver = {
108 .name = "serial",
109 .id_table = serial_tbl,
110 .probe = serial_init_chip,
113 static int __init probe_serial_gsc(void)
115 register_parisc_driver(&lasi_driver);
116 register_parisc_driver(&serial_driver);
117 return 0;
120 module_init(probe_serial_gsc);
122 MODULE_LICENSE("GPL");