2 * include/asm-arm/arch-realview/board-pba8.h
4 * Copyright (C) 2008 ARM Limited
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
21 #ifndef __ASM_ARCH_BOARD_PBA8_H
22 #define __ASM_ARCH_BOARD_PBA8_H
24 #include <mach/platform.h>
27 * Peripheral addresses
29 #define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */
30 #define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */
31 #define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */
32 #define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */
33 #define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
34 #define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
35 #define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */
36 #define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
37 #define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
38 #define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */
39 #define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */
40 #define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
41 #define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
42 #define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */
43 #define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */
44 #define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
45 #define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
46 #define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
47 #define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
48 #define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
49 #define REALVIEW_PBA8_FLASH0_BASE 0x40000000
50 #define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
51 #define REALVIEW_PBA8_FLASH1_BASE 0x44000000
52 #define REALVIEW_PBA8_FLASH1_SIZE SZ_64M
53 #define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */
54 #define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */
55 #define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
56 #define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */
57 #define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
58 #define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
60 #define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74
65 #define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */
66 #define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
67 #define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
69 #define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */
70 #define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
71 #define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
73 #endif /* __ASM_ARCH_BOARD_PBA8_H */