include/linux/jiffies.h

   1 #ifndef _LINUX_JIFFIES_H
   2 #define _LINUX_JIFFIES_H
   3
   4 #include <linux/calc64.h>
   5 #include <linux/kernel.h>
   6 #include <linux/types.h>
   7 #include <linux/time.h>
   8 #include <linux/timex.h>
   9 #include <asm/param.h>                  /* for HZ */
  10
  11 /*
  12  * The following defines establish the engineering parameters of the PLL
  13  * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
  14  * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
  15  * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
  16  * nearest power of two in order to avoid hardware multiply operations.
  17  */
  18 #if HZ >= 12 && HZ < 24
  19 # define SHIFT_HZ       4
  20 #elif HZ >= 24 && HZ < 48
  21 # define SHIFT_HZ       5
  22 #elif HZ >= 48 && HZ < 96
  23 # define SHIFT_HZ       6
  24 #elif HZ >= 96 && HZ < 192
  25 # define SHIFT_HZ       7
  26 #elif HZ >= 192 && HZ < 384
  27 # define SHIFT_HZ       8
  28 #elif HZ >= 384 && HZ < 768
  29 # define SHIFT_HZ       9
  30 #elif HZ >= 768 && HZ < 1536
  31 # define SHIFT_HZ       10
  32 #elif HZ >= 1536 && HZ < 3072
  33 # define SHIFT_HZ       11
  34 #elif HZ >= 3072 && HZ < 6144
  35 # define SHIFT_HZ       12
  36 #elif HZ >= 6144 && HZ < 12288
  37 # define SHIFT_HZ       13
  38 #else
  39 # error You lose.
  40 #endif
  41
  42 /* LATCH is used in the interval timer and ftape setup. */
  43 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)  /* For divider */
  44
  45 /* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
  46  * improve accuracy by shifting LSH bits, hence calculating:
  47  *     (NOM << LSH) / DEN
  48  * This however means trouble for large NOM, because (NOM << LSH) may no
  49  * longer fit in 32 bits. The following way of calculating this gives us
  50  * some slack, under the following conditions:
  51  *   - (NOM / DEN) fits in (32 - LSH) bits.
  52  *   - (NOM % DEN) fits in (32 - LSH) bits.
  53  */
  54 #define SH_DIV(NOM,DEN,LSH) (   (((NOM) / (DEN)) << (LSH))              \
  55                              + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
  56
  57 /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
  58 #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
  59
  60 /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
  61 #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
  62
  63 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
  64 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
  65
  66 /* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and  */
  67 /* a value TUSEC for TICK_USEC (can be set bij adjtimex)                */
  68 #define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
  69
  70 /* some arch's have a small-data section that can be accessed register-relative
  71  * but that can only take up to, say, 4-byte variables. jiffies being part of
  72  * an 8-byte variable may not be correctly accessed unless we force the issue
  73  */
  74 #define __jiffy_data  __attribute__((section(".data")))
  75
  76 /*
  77  * The 64-bit value is not atomic - you MUST NOT read it
  78  * without sampling the sequence number in xtime_lock.
  79  * get_jiffies_64() will do this for you as appropriate.
  80  */
  81 extern u64 __jiffy_data jiffies_64;
  82 extern unsigned long volatile __jiffy_data jiffies;
  83
  84 #if (BITS_PER_LONG < 64)
  85 u64 get_jiffies_64(void);
  86 #else
  87 static inline u64 get_jiffies_64(void)
  88 {
  89         return (u64)jiffies;
  90 }
  91 #endif
  92
  93 /*
  94  *      These inlines deal with timer wrapping correctly. You are
  95  *      strongly encouraged to use them
  96  *      1. Because people otherwise forget
  97  *      2. Because if the timer wrap changes in future you won't have to
  98  *         alter your driver code.
  99  *
 100  * time_after(a,b) returns true if the time a is after time b.
 101  *
 102  * Do this with "<0" and ">=0" to only test the sign of the result. A
 103  * good compiler would generate better code (and a really good compiler
 104  * wouldn't care). Gcc is currently neither.
 105  */
 106 #define time_after(a,b)         \
 107         (typecheck(unsigned long, a) && \
 108          typecheck(unsigned long, b) && \
 109          ((long)(b) - (long)(a) < 0))
 110 #define time_before(a,b)        time_after(b,a)
 111
 112 #define time_after_eq(a,b)      \
 113         (typecheck(unsigned long, a) && \
 114          typecheck(unsigned long, b) && \
 115          ((long)(a) - (long)(b) >= 0))
 116 #define time_before_eq(a,b)     time_after_eq(b,a)
 117
 118 #define time_in_range(a,b,c) \
 119         (time_after_eq(a,b) && \
 120          time_before_eq(a,c))
 121
 122 /* Same as above, but does so with platform independent 64bit types.
 123  * These must be used when utilizing jiffies_64 (i.e. return value of
 124  * get_jiffies_64() */
 125 #define time_after64(a,b)       \
 126         (typecheck(__u64, a) && \
 127          typecheck(__u64, b) && \
 128          ((__s64)(b) - (__s64)(a) < 0))
 129 #define time_before64(a,b)      time_after64(b,a)
 130
 131 #define time_after_eq64(a,b)    \
 132         (typecheck(__u64, a) && \
 133          typecheck(__u64, b) && \
 134          ((__s64)(a) - (__s64)(b) >= 0))
 135 #define time_before_eq64(a,b)   time_after_eq64(b,a)
 136
 137 /*
 138  * Have the 32 bit jiffies value wrap 5 minutes after boot
 139  * so jiffies wrap bugs show up earlier.
 140  */
 141 #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
 142
 143 /*
 144  * Change timeval to jiffies, trying to avoid the
 145  * most obvious overflows..
 146  *
 147  * And some not so obvious.
 148  *
 149  * Note that we don't want to return LONG_MAX, because
 150  * for various timeout reasons we often end up having
 151  * to wait "jiffies+1" in order to guarantee that we wait
 152  * at _least_ "jiffies" - so "jiffies+1" had better still
 153  * be positive.
 154  */
 155 #define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
 156
 157 extern unsigned long preset_lpj;
 158
 159 /*
 160  * We want to do realistic conversions of time so we need to use the same
 161  * values the update wall clock code uses as the jiffies size.  This value
 162  * is: TICK_NSEC (which is defined in timex.h).  This
 163  * is a constant and is in nanoseconds.  We will use scaled math
 164  * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
 165  * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
 166  * constants and so are computed at compile time.  SHIFT_HZ (computed in
 167  * timex.h) adjusts the scaling for different HZ values.
 168
 169  * Scaled math???  What is that?
 170  *
 171  * Scaled math is a way to do integer math on values that would,
 172  * otherwise, either overflow, underflow, or cause undesired div
 173  * instructions to appear in the execution path.  In short, we "scale"
 174  * up the operands so they take more bits (more precision, less
 175  * underflow), do the desired operation and then "scale" the result back
 176  * by the same amount.  If we do the scaling by shifting we avoid the
 177  * costly mpy and the dastardly div instructions.
 178
 179  * Suppose, for example, we want to convert from seconds to jiffies
 180  * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE.  The
 181  * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
 182  * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
 183  * might calculate at compile time, however, the result will only have
 184  * about 3-4 bits of precision (less for smaller values of HZ).
 185  *
 186  * So, we scale as follows:
 187  * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
 188  * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
 189  * Then we make SCALE a power of two so:
 190  * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
 191  * Now we define:
 192  * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
 193  * jiff = (sec * SEC_CONV) >> SCALE;
 194  *
 195  * Often the math we use will expand beyond 32-bits so we tell C how to
 196  * do this and pass the 64-bit result of the mpy through the ">> SCALE"
 197  * which should take the result back to 32-bits.  We want this expansion
 198  * to capture as much precision as possible.  At the same time we don't
 199  * want to overflow so we pick the SCALE to avoid this.  In this file,
 200  * that means using a different scale for each range of HZ values (as
 201  * defined in timex.h).
 202  *
 203  * For those who want to know, gcc will give a 64-bit result from a "*"
 204  * operator if the result is a long long AND at least one of the
 205  * operands is cast to long long (usually just prior to the "*" so as
 206  * not to confuse it into thinking it really has a 64-bit operand,
 207  * which, buy the way, it can do, but it takes more code and at least 2
 208  * mpys).
 209
 210  * We also need to be aware that one second in nanoseconds is only a
 211  * couple of bits away from overflowing a 32-bit word, so we MUST use
 212  * 64-bits to get the full range time in nanoseconds.
 213
 214  */
 215
 216 /*
 217  * Here are the scales we will use.  One for seconds, nanoseconds and
 218  * microseconds.
 219  *
 220  * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
 221  * check if the sign bit is set.  If not, we bump the shift count by 1.
 222  * (Gets an extra bit of precision where we can use it.)
 223  * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
 224  * Haven't tested others.
 225
 226  * Limits of cpp (for #if expressions) only long (no long long), but
 227  * then we only need the most signicant bit.
 228  */
 229
 230 #define SEC_JIFFIE_SC (31 - SHIFT_HZ)
 231 #if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
 232 #undef SEC_JIFFIE_SC
 233 #define SEC_JIFFIE_SC (32 - SHIFT_HZ)
 234 #endif
 235 #define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
 236 #define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
 237 #define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
 238                                 TICK_NSEC -1) / (u64)TICK_NSEC))
 239
 240 #define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
 241                                         TICK_NSEC -1) / (u64)TICK_NSEC))
 242 #define USEC_CONVERSION  \
 243                     ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
 244                                         TICK_NSEC -1) / (u64)TICK_NSEC))
 245 /*
 246  * USEC_ROUND is used in the timeval to jiffie conversion.  See there
 247  * for more details.  It is the scaled resolution rounding value.  Note
 248  * that it is a 64-bit value.  Since, when it is applied, we are already
 249  * in jiffies (albit scaled), it is nothing but the bits we will shift
 250  * off.
 251  */
 252 #define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
 253 /*
 254  * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
 255  * into seconds.  The 64-bit case will overflow if we are not careful,
 256  * so use the messy SH_DIV macro to do it.  Still all constants.
 257  */
 258 #if BITS_PER_LONG < 64
 259 # define MAX_SEC_IN_JIFFIES \
 260         (long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
 261 #else   /* take care of overflow on 64 bits machines */
 262 # define MAX_SEC_IN_JIFFIES \
 263         (SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
 264
 265 #endif
 266
 267 /*
 268  * Convert various time units to each other:
 269  */
 270 extern unsigned int jiffies_to_msecs(const unsigned long j);
 271 extern unsigned int jiffies_to_usecs(const unsigned long j);
 272 extern unsigned long msecs_to_jiffies(const unsigned int m);
 273 extern unsigned long usecs_to_jiffies(const unsigned int u);
 274 extern unsigned long timespec_to_jiffies(const struct timespec *value);
 275 extern void jiffies_to_timespec(const unsigned long jiffies,
 276                                 struct timespec *value);
 277 extern unsigned long timeval_to_jiffies(const struct timeval *value);
 278 extern void jiffies_to_timeval(const unsigned long jiffies,
 279                                struct timeval *value);
 280 extern clock_t jiffies_to_clock_t(long x);
 281 extern unsigned long clock_t_to_jiffies(unsigned long x);
 282 extern u64 jiffies_64_to_clock_t(u64 x);
 283 extern u64 nsec_to_clock_t(u64 x);
 284
 285 #define TIMESTAMP_SIZE  30
 286
 287 #endif