?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
cmd64x: don't clear the other channel's interrupt
[linux-2.6/linux-mips/linux-dm7025.git] / drivers / message / fusion / mptsas.c
blobe4c94f93de16a98462518419c923bb24f24d9414
1 /*
2 * linux/drivers/message/fusion/mptsas.c
3 * For use with LSI PCI chip/adapter(s)
4 * running LSI Fusion MPT (Message Passing Technology) firmware.
5 *
6 * Copyright (c) 1999-2007 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
8 */
9 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
10 /*
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; version 2 of the License.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 NO WARRANTY
21 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 solely responsible for determining the appropriateness of using and
26 distributing the Program and assumes all risks associated with its
27 exercise of rights under this Agreement, including but not limited to
28 the risks and costs of program errors, damage to or loss of data,
29 programs or equipment, and unavailability or interruption of operations.
30
31 DISCLAIMER OF LIABILITY
32 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40 You should have received a copy of the GNU General Public License
41 along with this program; if not, write to the Free Software
42 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
43 */
44 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
45
46 #include <linux/module.h>
47 #include <linux/kernel.h>
48 #include <linux/init.h>
49 #include <linux/errno.h>
50 #include <linux/jiffies.h>
51 #include <linux/workqueue.h>
52 #include <linux/delay.h> /* for mdelay */
53
54 #include <scsi/scsi.h>
55 #include <scsi/scsi_cmnd.h>
56 #include <scsi/scsi_device.h>
57 #include <scsi/scsi_host.h>
58 #include <scsi/scsi_transport_sas.h>
59 #include <scsi/scsi_dbg.h>
60
61 #include "mptbase.h"
62 #include "mptscsih.h"
63 #include "mptsas.h"
64
65
66 #define my_NAME "Fusion MPT SAS Host driver"
67 #define my_VERSION MPT_LINUX_VERSION_COMMON
68 #define MYNAM "mptsas"
69
70 /*
71 * Reserved channel for integrated raid
72 */
73 #define MPTSAS_RAID_CHANNEL 1
74
75 MODULE_AUTHOR(MODULEAUTHOR);
76 MODULE_DESCRIPTION(my_NAME);
77 MODULE_LICENSE("GPL");
78 MODULE_VERSION(my_VERSION);
79
80 static int mpt_pt_clear;
81 module_param(mpt_pt_clear, int, 0);
82 MODULE_PARM_DESC(mpt_pt_clear,
83 " Clear persistency table: enable=1 "
84 "(default=MPTSCSIH_PT_CLEAR=0)");
85
86 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
87 #define MPTSAS_MAX_LUN (16895)
88 static int max_lun = MPTSAS_MAX_LUN;
89 module_param(max_lun, int, 0);
90 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
91
92 static u8 mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
93 static u8 mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
94 static u8 mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
95 static u8 mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
96
97 static void mptsas_hotplug_work(struct work_struct *work);
98
99 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
100 MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
101 {
102 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
103 "---- IO UNIT PAGE 0 ------------\n", ioc->name));
104 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
105 ioc->name, le16_to_cpu(phy_data->AttachedDeviceHandle)));
106 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n",
107 ioc->name, le16_to_cpu(phy_data->ControllerDevHandle)));
108 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n",
109 ioc->name, phy_data->Port));
110 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n",
111 ioc->name, phy_data->PortFlags));
112 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n",
113 ioc->name, phy_data->PhyFlags));
114 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
115 ioc->name, phy_data->NegotiatedLinkRate));
116 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
117 "Controller PHY Device Info=0x%X\n", ioc->name,
118 le32_to_cpu(phy_data->ControllerPhyDeviceInfo)));
119 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n",
120 ioc->name, le32_to_cpu(phy_data->DiscoveryStatus)));
121 }
122
123 static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0)
124 {
125 __le64 sas_address;
126
127 memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
128
129 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
130 "---- SAS PHY PAGE 0 ------------\n", ioc->name));
131 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
132 "Attached Device Handle=0x%X\n", ioc->name,
133 le16_to_cpu(pg0->AttachedDevHandle)));
134 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
135 ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
136 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
137 "Attached PHY Identifier=0x%X\n", ioc->name,
138 pg0->AttachedPhyIdentifier));
139 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n",
140 ioc->name, le32_to_cpu(pg0->AttachedDeviceInfo)));
141 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
142 ioc->name, pg0->ProgrammedLinkRate));
143 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n",
144 ioc->name, pg0->ChangeCount));
145 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n",
146 ioc->name, le32_to_cpu(pg0->PhyInfo)));
147 }
148
149 static void mptsas_print_phy_pg1(MPT_ADAPTER *ioc, SasPhyPage1_t *pg1)
150 {
151 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
152 "---- SAS PHY PAGE 1 ------------\n", ioc->name));
153 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n",
154 ioc->name, pg1->InvalidDwordCount));
155 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
156 "Running Disparity Error Count=0x%x\n", ioc->name,
157 pg1->RunningDisparityErrorCount));
158 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
159 "Loss Dword Synch Count=0x%x\n", ioc->name,
160 pg1->LossDwordSynchCount));
161 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
162 "PHY Reset Problem Count=0x%x\n\n", ioc->name,
163 pg1->PhyResetProblemCount));
164 }
165
166 static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0)
167 {
168 __le64 sas_address;
169
170 memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
171
172 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
173 "---- SAS DEVICE PAGE 0 ---------\n", ioc->name));
174 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
175 ioc->name, le16_to_cpu(pg0->DevHandle)));
176 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n",
177 ioc->name, le16_to_cpu(pg0->ParentDevHandle)));
178 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n",
179 ioc->name, le16_to_cpu(pg0->EnclosureHandle)));
180 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n",
181 ioc->name, le16_to_cpu(pg0->Slot)));
182 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
183 ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
184 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n",
185 ioc->name, pg0->TargetID));
186 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n",
187 ioc->name, pg0->Bus));
188 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n",
189 ioc->name, pg0->PhyNum));
190 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n",
191 ioc->name, le16_to_cpu(pg0->AccessStatus)));
192 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n",
193 ioc->name, le32_to_cpu(pg0->DeviceInfo)));
194 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n",
195 ioc->name, le16_to_cpu(pg0->Flags)));
196 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n",
197 ioc->name, pg0->PhysicalPort));
198 }
199
200 static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
201 {
202 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
203 "---- SAS EXPANDER PAGE 1 ------------\n", ioc->name));
204 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n",
205 ioc->name, pg1->PhysicalPort));
206 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n",
207 ioc->name, pg1->PhyIdentifier));
208 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
209 ioc->name, pg1->NegotiatedLinkRate));
210 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
211 ioc->name, pg1->ProgrammedLinkRate));
212 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n",
213 ioc->name, pg1->HwLinkRate));
214 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n",
215 ioc->name, le16_to_cpu(pg1->OwnerDevHandle)));
216 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
217 "Attached Device Handle=0x%X\n\n", ioc->name,
218 le16_to_cpu(pg1->AttachedDevHandle)));
219 }
220
221 static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
222 {
223 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
224 return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
225 }
226
227 static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
228 {
229 struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
230 return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
231 }
232
233 /*
234 * mptsas_find_portinfo_by_handle
235 *
236 * This function should be called with the sas_topology_mutex already held
237 */
238 static struct mptsas_portinfo *
239 mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
240 {
241 struct mptsas_portinfo *port_info, *rc=NULL;
242 int i;
243
244 list_for_each_entry(port_info, &ioc->sas_topology, list)
245 for (i = 0; i < port_info->num_phys; i++)
246 if (port_info->phy_info[i].identify.handle == handle) {
247 rc = port_info;
248 goto out;
249 }
250 out:
251 return rc;
252 }
253
254 /*
255 * Returns true if there is a scsi end device
256 */
257 static inline int
258 mptsas_is_end_device(struct mptsas_devinfo * attached)
259 {
260 if ((attached->sas_address) &&
261 (attached->device_info &
262 MPI_SAS_DEVICE_INFO_END_DEVICE) &&
263 ((attached->device_info &
264 MPI_SAS_DEVICE_INFO_SSP_TARGET) |
265 (attached->device_info &
266 MPI_SAS_DEVICE_INFO_STP_TARGET) |
267 (attached->device_info &
268 MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
269 return 1;
270 else
271 return 0;
272 }
273
274 /* no mutex */
275 static void
276 mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_details)
277 {
278 struct mptsas_portinfo *port_info;
279 struct mptsas_phyinfo *phy_info;
280 u8 i;
281
282 if (!port_details)
283 return;
284
285 port_info = port_details->port_info;
286 phy_info = port_info->phy_info;
287
288 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
289 "bitmask=0x%016llX\n", ioc->name, __FUNCTION__, port_details,
290 port_details->num_phys, (unsigned long long)
291 port_details->phy_bitmask));
292
293 for (i = 0; i < port_info->num_phys; i++, phy_info++) {
294 if(phy_info->port_details != port_details)
295 continue;
296 memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
297 phy_info->port_details = NULL;
298 }
299 kfree(port_details);
300 }
301
302 static inline struct sas_rphy *
303 mptsas_get_rphy(struct mptsas_phyinfo *phy_info)
304 {
305 if (phy_info->port_details)
306 return phy_info->port_details->rphy;
307 else
308 return NULL;
309 }
310
311 static inline void
312 mptsas_set_rphy(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy)
313 {
314 if (phy_info->port_details) {
315 phy_info->port_details->rphy = rphy;
316 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n",
317 ioc->name, rphy));
318 }
319
320 if (rphy) {
321 dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
322 &rphy->dev, MYIOC_s_FMT "add:", ioc->name));
323 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n",
324 ioc->name, rphy, rphy->dev.release));
325 }
326 }
327
328 static inline struct sas_port *
329 mptsas_get_port(struct mptsas_phyinfo *phy_info)
330 {
331 if (phy_info->port_details)
332 return phy_info->port_details->port;
333 else
334 return NULL;
335 }
336
337 static inline void
338 mptsas_set_port(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_port *port)
339 {
340 if (phy_info->port_details)
341 phy_info->port_details->port = port;
342
343 if (port) {
344 dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
345 &port->dev, MYIOC_s_FMT "add:", ioc->name));
346 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n",
347 ioc->name, port, port->dev.release));
348 }
349 }
350
351 static inline struct scsi_target *
352 mptsas_get_starget(struct mptsas_phyinfo *phy_info)
353 {
354 if (phy_info->port_details)
355 return phy_info->port_details->starget;
356 else
357 return NULL;
358 }
359
360 static inline void
361 mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target *
362 starget)
363 {
364 if (phy_info->port_details)
365 phy_info->port_details->starget = starget;
366 }
367
368
369 /*
370 * mptsas_setup_wide_ports
371 *
372 * Updates for new and existing narrow/wide port configuration
373 * in the sas_topology
374 */
375 static void
376 mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
377 {
378 struct mptsas_portinfo_details * port_details;
379 struct mptsas_phyinfo *phy_info, *phy_info_cmp;
380 u64 sas_address;
381 int i, j;
382
383 mutex_lock(&ioc->sas_topology_mutex);
384
385 phy_info = port_info->phy_info;
386 for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
387 if (phy_info->attached.handle)
388 continue;
389 port_details = phy_info->port_details;
390 if (!port_details)
391 continue;
392 if (port_details->num_phys < 2)
393 continue;
394 /*
395 * Removing a phy from a port, letting the last
396 * phy be removed by firmware events.
397 */
398 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
399 "%s: [%p]: deleting phy = %d\n",
400 ioc->name, __FUNCTION__, port_details, i));
401 port_details->num_phys--;
402 port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
403 memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
404 sas_port_delete_phy(port_details->port, phy_info->phy);
405 phy_info->port_details = NULL;
406 }
407
408 /*
409 * Populate and refresh the tree
410 */
411 phy_info = port_info->phy_info;
412 for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
413 sas_address = phy_info->attached.sas_address;
414 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n",
415 ioc->name, i, (unsigned long long)sas_address));
416 if (!sas_address)
417 continue;
418 port_details = phy_info->port_details;
419 /*
420 * Forming a port
421 */
422 if (!port_details) {
423 port_details = kzalloc(sizeof(*port_details),
424 GFP_KERNEL);
425 if (!port_details)
426 goto out;
427 port_details->num_phys = 1;
428 port_details->port_info = port_info;
429 if (phy_info->phy_id < 64 )
430 port_details->phy_bitmask |=
431 (1 << phy_info->phy_id);
432 phy_info->sas_port_add_phy=1;
433 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t"
434 "phy_id=%d sas_address=0x%018llX\n",
435 ioc->name, i, (unsigned long long)sas_address));
436 phy_info->port_details = port_details;
437 }
438
439 if (i == port_info->num_phys - 1)
440 continue;
441 phy_info_cmp = &port_info->phy_info[i + 1];
442 for (j = i + 1 ; j < port_info->num_phys ; j++,
443 phy_info_cmp++) {
444 if (!phy_info_cmp->attached.sas_address)
445 continue;
446 if (sas_address != phy_info_cmp->attached.sas_address)
447 continue;
448 if (phy_info_cmp->port_details == port_details )
449 continue;
450 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
451 "\t\tphy_id=%d sas_address=0x%018llX\n",
452 ioc->name, j, (unsigned long long)
453 phy_info_cmp->attached.sas_address));
454 if (phy_info_cmp->port_details) {
455 port_details->rphy =
456 mptsas_get_rphy(phy_info_cmp);
457 port_details->port =
458 mptsas_get_port(phy_info_cmp);
459 port_details->starget =
460 mptsas_get_starget(phy_info_cmp);
461 port_details->num_phys =
462 phy_info_cmp->port_details->num_phys;
463 if (!phy_info_cmp->port_details->num_phys)
464 kfree(phy_info_cmp->port_details);
465 } else
466 phy_info_cmp->sas_port_add_phy=1;
467 /*
468 * Adding a phy to a port
469 */
470 phy_info_cmp->port_details = port_details;
471 if (phy_info_cmp->phy_id < 64 )
472 port_details->phy_bitmask |=
473 (1 << phy_info_cmp->phy_id);
474 port_details->num_phys++;
475 }
476 }
477
478 out:
479
480 for (i = 0; i < port_info->num_phys; i++) {
481 port_details = port_info->phy_info[i].port_details;
482 if (!port_details)
483 continue;
484 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
485 "%s: [%p]: phy_id=%02d num_phys=%02d "
486 "bitmask=0x%016llX\n", ioc->name, __FUNCTION__,
487 port_details, i, port_details->num_phys,
488 (unsigned long long)port_details->phy_bitmask));
489 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
490 ioc->name, port_details->port, port_details->rphy));
491 }
492 dsaswideprintk(ioc, printk("\n"));
493 mutex_unlock(&ioc->sas_topology_mutex);
494 }
495
496 /**
497 * csmisas_find_vtarget
498 *
499 * @ioc
500 * @volume_id
501 * @volume_bus
502 *
503 **/
504 static VirtTarget *
505 mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id)
506 {
507 struct scsi_device *sdev;
508 VirtDevice *vdevice;
509 VirtTarget *vtarget = NULL;
510
511 shost_for_each_device(sdev, ioc->sh) {
512 if ((vdevice = sdev->hostdata) == NULL)
513 continue;
514 if (vdevice->vtarget->id == id &&
515 vdevice->vtarget->channel == channel)
516 vtarget = vdevice->vtarget;
517 }
518 return vtarget;
519 }
520
521 /**
522 * mptsas_target_reset
523 *
524 * Issues TARGET_RESET to end device using handshaking method
525 *
526 * @ioc
527 * @channel
528 * @id
529 *
530 * Returns (1) success
531 * (0) failure
532 *
533 **/
534 static int
535 mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
536 {
537 MPT_FRAME_HDR *mf;
538 SCSITaskMgmt_t *pScsiTm;
539
540 if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
541 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
542 ioc->name,__FUNCTION__, __LINE__));
543 return 0;
544 }
545
546 /* Format the Request
547 */
548 pScsiTm = (SCSITaskMgmt_t *) mf;
549 memset (pScsiTm, 0, sizeof(SCSITaskMgmt_t));
550 pScsiTm->TargetID = id;
551 pScsiTm->Bus = channel;
552 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
553 pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
554 pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
555
556 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
557
558 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
559
560 return 1;
561 }
562
563 /**
564 * mptsas_target_reset_queue
565 *
566 * Receive request for TARGET_RESET after recieving an firmware
567 * event NOT_RESPONDING_EVENT, then put command in link list
568 * and queue if task_queue already in use.
569 *
570 * @ioc
571 * @sas_event_data
572 *
573 **/
574 static void
575 mptsas_target_reset_queue(MPT_ADAPTER *ioc,
576 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
577 {
578 MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
579 VirtTarget *vtarget = NULL;
580 struct mptsas_target_reset_event *target_reset_list;
581 u8 id, channel;
582
583 id = sas_event_data->TargetID;
584 channel = sas_event_data->Bus;
585
586 if (!(vtarget = mptsas_find_vtarget(ioc, channel, id)))
587 return;
588
589 vtarget->deleted = 1; /* block IO */
590
591 target_reset_list = kzalloc(sizeof(*target_reset_list),
592 GFP_ATOMIC);
593 if (!target_reset_list) {
594 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
595 ioc->name,__FUNCTION__, __LINE__));
596 return;
597 }
598
599 memcpy(&target_reset_list->sas_event_data, sas_event_data,
600 sizeof(*sas_event_data));
601 list_add_tail(&target_reset_list->list, &hd->target_reset_list);
602
603 if (hd->resetPending)
604 return;
605
606 if (mptsas_target_reset(ioc, channel, id)) {
607 target_reset_list->target_reset_issued = 1;
608 hd->resetPending = 1;
609 }
610 }
611
612 /**
613 * mptsas_dev_reset_complete
614 *
615 * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
616 * enable work queue to finish off removing device from upper layers.
617 * then send next TARGET_RESET in the queue.
618 *
619 * @ioc
620 *
621 **/
622 static void
623 mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
624 {
625 MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
626 struct list_head *head = &hd->target_reset_list;
627 struct mptsas_target_reset_event *target_reset_list;
628 struct mptsas_hotplug_event *ev;
629 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
630 u8 id, channel;
631 __le64 sas_address;
632
633 if (list_empty(head))
634 return;
635
636 target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
637
638 sas_event_data = &target_reset_list->sas_event_data;
639 id = sas_event_data->TargetID;
640 channel = sas_event_data->Bus;
641 hd->resetPending = 0;
642
643 /*
644 * retry target reset
645 */
646 if (!target_reset_list->target_reset_issued) {
647 if (mptsas_target_reset(ioc, channel, id)) {
648 target_reset_list->target_reset_issued = 1;
649 hd->resetPending = 1;
650 }
651 return;
652 }
653
654 /*
655 * enable work queue to remove device from upper layers
656 */
657 list_del(&target_reset_list->list);
658
659 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
660 if (!ev) {
661 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
662 ioc->name,__FUNCTION__, __LINE__));
663 return;
664 }
665
666 INIT_WORK(&ev->work, mptsas_hotplug_work);
667 ev->ioc = ioc;
668 ev->handle = le16_to_cpu(sas_event_data->DevHandle);
669 ev->parent_handle =
670 le16_to_cpu(sas_event_data->ParentDevHandle);
671 ev->channel = channel;
672 ev->id =id;
673 ev->phy_id = sas_event_data->PhyNum;
674 memcpy(&sas_address, &sas_event_data->SASAddress,
675 sizeof(__le64));
676 ev->sas_address = le64_to_cpu(sas_address);
677 ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
678 ev->event_type = MPTSAS_DEL_DEVICE;
679 schedule_work(&ev->work);
680 kfree(target_reset_list);
681
682 /*
683 * issue target reset to next device in the queue
684 */
685
686 head = &hd->target_reset_list;
687 if (list_empty(head))
688 return;
689
690 target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
691 list);
692
693 sas_event_data = &target_reset_list->sas_event_data;
694 id = sas_event_data->TargetID;
695 channel = sas_event_data->Bus;
696
697 if (mptsas_target_reset(ioc, channel, id)) {
698 target_reset_list->target_reset_issued = 1;
699 hd->resetPending = 1;
700 }
701 }
702
703 /**
704 * mptsas_taskmgmt_complete
705 *
706 * @ioc
707 * @mf
708 * @mr
709 *
710 **/
711 static int
712 mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
713 {
714 mptsas_dev_reset_complete(ioc);
715 return mptscsih_taskmgmt_complete(ioc, mf, mr);
716 }
717
718 /**
719 * mptscsih_ioc_reset
720 *
721 * @ioc
722 * @reset_phase
723 *
724 **/
725 static int
726 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
727 {
728 MPT_SCSI_HOST *hd;
729 struct mptsas_target_reset_event *target_reset_list, *n;
730 int rc;
731
732 rc = mptscsih_ioc_reset(ioc, reset_phase);
733
734 if (ioc->bus_type != SAS)
735 goto out;
736
737 if (reset_phase != MPT_IOC_POST_RESET)
738 goto out;
739
740 if (!ioc->sh || !ioc->sh->hostdata)
741 goto out;
742 hd = shost_priv(ioc->sh);
743 if (!hd->ioc)
744 goto out;
745
746 if (list_empty(&hd->target_reset_list))
747 goto out;
748
749 /* flush the target_reset_list */
750 list_for_each_entry_safe(target_reset_list, n,
751 &hd->target_reset_list, list) {
752 list_del(&target_reset_list->list);
753 kfree(target_reset_list);
754 }
755
756 out:
757 return rc;
758 }
759
760 static int
761 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
762 u32 form, u32 form_specific)
763 {
764 ConfigExtendedPageHeader_t hdr;
765 CONFIGPARMS cfg;
766 SasEnclosurePage0_t *buffer;
767 dma_addr_t dma_handle;
768 int error;
769 __le64 le_identifier;
770
771 memset(&hdr, 0, sizeof(hdr));
772 hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION;
773 hdr.PageNumber = 0;
774 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
775 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE;
776
777 cfg.cfghdr.ehdr = &hdr;
778 cfg.physAddr = -1;
779 cfg.pageAddr = form + form_specific;
780 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
781 cfg.dir = 0; /* read */
782 cfg.timeout = 10;
783
784 error = mpt_config(ioc, &cfg);
785 if (error)
786 goto out;
787 if (!hdr.ExtPageLength) {
788 error = -ENXIO;
789 goto out;
790 }
791
792 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
793 &dma_handle);
794 if (!buffer) {
795 error = -ENOMEM;
796 goto out;
797 }
798
799 cfg.physAddr = dma_handle;
800 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
801
802 error = mpt_config(ioc, &cfg);
803 if (error)
804 goto out_free_consistent;
805
806 /* save config data */
807 memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64));
808 enclosure->enclosure_logical_id = le64_to_cpu(le_identifier);
809 enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle);
810 enclosure->flags = le16_to_cpu(buffer->Flags);
811 enclosure->num_slot = le16_to_cpu(buffer->NumSlots);
812 enclosure->start_slot = le16_to_cpu(buffer->StartSlot);
813 enclosure->start_id = buffer->StartTargetID;
814 enclosure->start_channel = buffer->StartBus;
815 enclosure->sep_id = buffer->SEPTargetID;
816 enclosure->sep_channel = buffer->SEPBus;
817
818 out_free_consistent:
819 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
820 buffer, dma_handle);
821 out:
822 return error;
823 }
824
825 static int
826 mptsas_slave_configure(struct scsi_device *sdev)
827 {
828
829 if (sdev->channel == MPTSAS_RAID_CHANNEL)
830 goto out;
831
832 sas_read_port_mode_page(sdev);
833
834 out:
835 return mptscsih_slave_configure(sdev);
836 }
837
838 static int
839 mptsas_target_alloc(struct scsi_target *starget)
840 {
841 struct Scsi_Host *host = dev_to_shost(&starget->dev);
842 MPT_SCSI_HOST *hd = shost_priv(host);
843 VirtTarget *vtarget;
844 u8 id, channel;
845 struct sas_rphy *rphy;
846 struct mptsas_portinfo *p;
847 int i;
848 MPT_ADAPTER *ioc = hd->ioc;
849
850 vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
851 if (!vtarget)
852 return -ENOMEM;
853
854 vtarget->starget = starget;
855 vtarget->ioc_id = ioc->id;
856 vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
857 id = starget->id;
858 channel = 0;
859
860 /*
861 * RAID volumes placed beyond the last expected port.
862 */
863 if (starget->channel == MPTSAS_RAID_CHANNEL) {
864 for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
865 if (id == ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
866 channel = ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
867 goto out;
868 }
869
870 rphy = dev_to_rphy(starget->dev.parent);
871 mutex_lock(&ioc->sas_topology_mutex);
872 list_for_each_entry(p, &ioc->sas_topology, list) {
873 for (i = 0; i < p->num_phys; i++) {
874 if (p->phy_info[i].attached.sas_address !=
875 rphy->identify.sas_address)
876 continue;
877 id = p->phy_info[i].attached.id;
878 channel = p->phy_info[i].attached.channel;
879 mptsas_set_starget(&p->phy_info[i], starget);
880
881 /*
882 * Exposing hidden raid components
883 */
884 if (mptscsih_is_phys_disk(ioc, channel, id)) {
885 id = mptscsih_raid_id_to_num(ioc,
886 channel, id);
887 vtarget->tflags |=
888 MPT_TARGET_FLAGS_RAID_COMPONENT;
889 p->phy_info[i].attached.phys_disk_num = id;
890 }
891 mutex_unlock(&ioc->sas_topology_mutex);
892 goto out;
893 }
894 }
895 mutex_unlock(&ioc->sas_topology_mutex);
896
897 kfree(vtarget);
898 return -ENXIO;
899
900 out:
901 vtarget->id = id;
902 vtarget->channel = channel;
903 starget->hostdata = vtarget;
904 return 0;
905 }
906
907 static void
908 mptsas_target_destroy(struct scsi_target *starget)
909 {
910 struct Scsi_Host *host = dev_to_shost(&starget->dev);
911 MPT_SCSI_HOST *hd = shost_priv(host);
912 struct sas_rphy *rphy;
913 struct mptsas_portinfo *p;
914 int i;
915 MPT_ADAPTER *ioc = hd->ioc;
916
917 if (!starget->hostdata)
918 return;
919
920 if (starget->channel == MPTSAS_RAID_CHANNEL)
921 goto out;
922
923 rphy = dev_to_rphy(starget->dev.parent);
924 list_for_each_entry(p, &ioc->sas_topology, list) {
925 for (i = 0; i < p->num_phys; i++) {
926 if (p->phy_info[i].attached.sas_address !=
927 rphy->identify.sas_address)
928 continue;
929 mptsas_set_starget(&p->phy_info[i], NULL);
930 goto out;
931 }
932 }
933
934 out:
935 kfree(starget->hostdata);
936 starget->hostdata = NULL;
937 }
938
939
940 static int
941 mptsas_slave_alloc(struct scsi_device *sdev)
942 {
943 struct Scsi_Host *host = sdev->host;
944 MPT_SCSI_HOST *hd = shost_priv(host);
945 struct sas_rphy *rphy;
946 struct mptsas_portinfo *p;
947 VirtDevice *vdevice;
948 struct scsi_target *starget;
949 int i;
950 MPT_ADAPTER *ioc = hd->ioc;
951
952 vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
953 if (!vdevice) {
954 printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n",
955 ioc->name, sizeof(VirtDevice));
956 return -ENOMEM;
957 }
958 starget = scsi_target(sdev);
959 vdevice->vtarget = starget->hostdata;
960
961 if (sdev->channel == MPTSAS_RAID_CHANNEL)
962 goto out;
963
964 rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
965 mutex_lock(&ioc->sas_topology_mutex);
966 list_for_each_entry(p, &ioc->sas_topology, list) {
967 for (i = 0; i < p->num_phys; i++) {
968 if (p->phy_info[i].attached.sas_address !=
969 rphy->identify.sas_address)
970 continue;
971 vdevice->lun = sdev->lun;
972 /*
973 * Exposing hidden raid components
974 */
975 if (mptscsih_is_phys_disk(ioc,
976 p->phy_info[i].attached.channel,
977 p->phy_info[i].attached.id))
978 sdev->no_uld_attach = 1;
979 mutex_unlock(&ioc->sas_topology_mutex);
980 goto out;
981 }
982 }
983 mutex_unlock(&ioc->sas_topology_mutex);
984
985 kfree(vdevice);
986 return -ENXIO;
987
988 out:
989 vdevice->vtarget->num_luns++;
990 sdev->hostdata = vdevice;
991 return 0;
992 }
993
994 static int
995 mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
996 {
997 VirtDevice *vdevice = SCpnt->device->hostdata;
998
999 if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) {
1000 SCpnt->result = DID_NO_CONNECT << 16;
1001 done(SCpnt);
1002 return 0;
1003 }
1004
1005 // scsi_print_command(SCpnt);
1006
1007 return mptscsih_qcmd(SCpnt,done);
1008 }
1009
1010
1011 static struct scsi_host_template mptsas_driver_template = {
1012 .module = THIS_MODULE,
1013 .proc_name = "mptsas",
1014 .proc_info = mptscsih_proc_info,
1015 .name = "MPT SPI Host",
1016 .info = mptscsih_info,
1017 .queuecommand = mptsas_qcmd,
1018 .target_alloc = mptsas_target_alloc,
1019 .slave_alloc = mptsas_slave_alloc,
1020 .slave_configure = mptsas_slave_configure,
1021 .target_destroy = mptsas_target_destroy,
1022 .slave_destroy = mptscsih_slave_destroy,
1023 .change_queue_depth = mptscsih_change_queue_depth,
1024 .eh_abort_handler = mptscsih_abort,
1025 .eh_device_reset_handler = mptscsih_dev_reset,
1026 .eh_bus_reset_handler = mptscsih_bus_reset,
1027 .eh_host_reset_handler = mptscsih_host_reset,
1028 .bios_param = mptscsih_bios_param,
1029 .can_queue = MPT_FC_CAN_QUEUE,
1030 .this_id = -1,
1031 .sg_tablesize = MPT_SCSI_SG_DEPTH,
1032 .max_sectors = 8192,
1033 .cmd_per_lun = 7,
1034 .use_clustering = ENABLE_CLUSTERING,
1035 .shost_attrs = mptscsih_host_attrs,
1036 };
1037
1038 static int mptsas_get_linkerrors(struct sas_phy *phy)
1039 {
1040 MPT_ADAPTER *ioc = phy_to_ioc(phy);
1041 ConfigExtendedPageHeader_t hdr;
1042 CONFIGPARMS cfg;
1043 SasPhyPage1_t *buffer;
1044 dma_addr_t dma_handle;
1045 int error;
1046
1047 /* FIXME: only have link errors on local phys */
1048 if (!scsi_is_sas_phy_local(phy))
1049 return -EINVAL;
1050
1051 hdr.PageVersion = MPI_SASPHY1_PAGEVERSION;
1052 hdr.ExtPageLength = 0;
1053 hdr.PageNumber = 1 /* page number 1*/;
1054 hdr.Reserved1 = 0;
1055 hdr.Reserved2 = 0;
1056 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1057 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
1058
1059 cfg.cfghdr.ehdr = &hdr;
1060 cfg.physAddr = -1;
1061 cfg.pageAddr = phy->identify.phy_identifier;
1062 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1063 cfg.dir = 0; /* read */
1064 cfg.timeout = 10;
1065
1066 error = mpt_config(ioc, &cfg);
1067 if (error)
1068 return error;
1069 if (!hdr.ExtPageLength)
1070 return -ENXIO;
1071
1072 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1073 &dma_handle);
1074 if (!buffer)
1075 return -ENOMEM;
1076
1077 cfg.physAddr = dma_handle;
1078 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1079
1080 error = mpt_config(ioc, &cfg);
1081 if (error)
1082 goto out_free_consistent;
1083
1084 mptsas_print_phy_pg1(ioc, buffer);
1085
1086 phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount);
1087 phy->running_disparity_error_count =
1088 le32_to_cpu(buffer->RunningDisparityErrorCount);
1089 phy->loss_of_dword_sync_count =
1090 le32_to_cpu(buffer->LossDwordSynchCount);
1091 phy->phy_reset_problem_count =
1092 le32_to_cpu(buffer->PhyResetProblemCount);
1093
1094 out_free_consistent:
1095 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1096 buffer, dma_handle);
1097 return error;
1098 }
1099
1100 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
1101 MPT_FRAME_HDR *reply)
1102 {
1103 ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
1104 if (reply != NULL) {
1105 ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
1106 memcpy(ioc->sas_mgmt.reply, reply,
1107 min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
1108 }
1109 complete(&ioc->sas_mgmt.done);
1110 return 1;
1111 }
1112
1113 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
1114 {
1115 MPT_ADAPTER *ioc = phy_to_ioc(phy);
1116 SasIoUnitControlRequest_t *req;
1117 SasIoUnitControlReply_t *reply;
1118 MPT_FRAME_HDR *mf;
1119 MPIHeader_t *hdr;
1120 unsigned long timeleft;
1121 int error = -ERESTARTSYS;
1122
1123 /* FIXME: fusion doesn't allow non-local phy reset */
1124 if (!scsi_is_sas_phy_local(phy))
1125 return -EINVAL;
1126
1127 /* not implemented for expanders */
1128 if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP)
1129 return -ENXIO;
1130
1131 if (mutex_lock_interruptible(&ioc->sas_mgmt.mutex))
1132 goto out;
1133
1134 mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
1135 if (!mf) {
1136 error = -ENOMEM;
1137 goto out_unlock;
1138 }
1139
1140 hdr = (MPIHeader_t *) mf;
1141 req = (SasIoUnitControlRequest_t *)mf;
1142 memset(req, 0, sizeof(SasIoUnitControlRequest_t));
1143 req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
1144 req->MsgContext = hdr->MsgContext;
1145 req->Operation = hard_reset ?
1146 MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
1147 req->PhyNum = phy->identify.phy_identifier;
1148
1149 mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
1150
1151 timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
1152 10 * HZ);
1153 if (!timeleft) {
1154 /* On timeout reset the board */
1155 mpt_free_msg_frame(ioc, mf);
1156 mpt_HardResetHandler(ioc, CAN_SLEEP);
1157 error = -ETIMEDOUT;
1158 goto out_unlock;
1159 }
1160
1161 /* a reply frame is expected */
1162 if ((ioc->sas_mgmt.status &
1163 MPT_IOCTL_STATUS_RF_VALID) == 0) {
1164 error = -ENXIO;
1165 goto out_unlock;
1166 }
1167
1168 /* process the completed Reply Message Frame */
1169 reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
1170 if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
1171 printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
1172 ioc->name, __FUNCTION__, reply->IOCStatus, reply->IOCLogInfo);
1173 error = -ENXIO;
1174 goto out_unlock;
1175 }
1176
1177 error = 0;
1178
1179 out_unlock:
1180 mutex_unlock(&ioc->sas_mgmt.mutex);
1181 out:
1182 return error;
1183 }
1184
1185 static int
1186 mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
1187 {
1188 MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
1189 int i, error;
1190 struct mptsas_portinfo *p;
1191 struct mptsas_enclosure enclosure_info;
1192 u64 enclosure_handle;
1193
1194 mutex_lock(&ioc->sas_topology_mutex);
1195 list_for_each_entry(p, &ioc->sas_topology, list) {
1196 for (i = 0; i < p->num_phys; i++) {
1197 if (p->phy_info[i].attached.sas_address ==
1198 rphy->identify.sas_address) {
1199 enclosure_handle = p->phy_info[i].
1200 attached.handle_enclosure;
1201 goto found_info;
1202 }
1203 }
1204 }
1205 mutex_unlock(&ioc->sas_topology_mutex);
1206 return -ENXIO;
1207
1208 found_info:
1209 mutex_unlock(&ioc->sas_topology_mutex);
1210 memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
1211 error = mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
1212 (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
1213 MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle);
1214 if (!error)
1215 *identifier = enclosure_info.enclosure_logical_id;
1216 return error;
1217 }
1218
1219 static int
1220 mptsas_get_bay_identifier(struct sas_rphy *rphy)
1221 {
1222 MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
1223 struct mptsas_portinfo *p;
1224 int i, rc;
1225
1226 mutex_lock(&ioc->sas_topology_mutex);
1227 list_for_each_entry(p, &ioc->sas_topology, list) {
1228 for (i = 0; i < p->num_phys; i++) {
1229 if (p->phy_info[i].attached.sas_address ==
1230 rphy->identify.sas_address) {
1231 rc = p->phy_info[i].attached.slot;
1232 goto out;
1233 }
1234 }
1235 }
1236 rc = -ENXIO;
1237 out:
1238 mutex_unlock(&ioc->sas_topology_mutex);
1239 return rc;
1240 }
1241
1242 static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
1243 struct request *req)
1244 {
1245 MPT_ADAPTER *ioc = ((MPT_SCSI_HOST *) shost->hostdata)->ioc;
1246 MPT_FRAME_HDR *mf;
1247 SmpPassthroughRequest_t *smpreq;
1248 struct request *rsp = req->next_rq;
1249 int ret;
1250 int flagsLength;
1251 unsigned long timeleft;
1252 char *psge;
1253 dma_addr_t dma_addr_in = 0;
1254 dma_addr_t dma_addr_out = 0;
1255 u64 sas_address = 0;
1256
1257 if (!rsp) {
1258 printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
1259 ioc->name, __FUNCTION__);
1260 return -EINVAL;
1261 }
1262
1263 /* do we need to support multiple segments? */
1264 if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
1265 printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
1266 ioc->name, __FUNCTION__, req->bio->bi_vcnt, req->data_len,
1267 rsp->bio->bi_vcnt, rsp->data_len);
1268 return -EINVAL;
1269 }
1270
1271 ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex);
1272 if (ret)
1273 goto out;
1274
1275 mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
1276 if (!mf) {
1277 ret = -ENOMEM;
1278 goto out_unlock;
1279 }
1280
1281 smpreq = (SmpPassthroughRequest_t *)mf;
1282 memset(smpreq, 0, sizeof(*smpreq));
1283
1284 smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4);
1285 smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
1286
1287 if (rphy)
1288 sas_address = rphy->identify.sas_address;
1289 else {
1290 struct mptsas_portinfo *port_info;
1291
1292 mutex_lock(&ioc->sas_topology_mutex);
1293 port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
1294 if (port_info && port_info->phy_info)
1295 sas_address =
1296 port_info->phy_info[0].phy->identify.sas_address;
1297 mutex_unlock(&ioc->sas_topology_mutex);
1298 }
1299
1300 *((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address);
1301
1302 psge = (char *)
1303 (((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4));
1304
1305 /* request */
1306 flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1307 MPI_SGE_FLAGS_END_OF_BUFFER |
1308 MPI_SGE_FLAGS_DIRECTION |
1309 mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
1310 flagsLength |= (req->data_len - 4);
1311
1312 dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
1313 req->data_len, PCI_DMA_BIDIRECTIONAL);
1314 if (!dma_addr_out)
1315 goto put_mf;
1316 mpt_add_sge(psge, flagsLength, dma_addr_out);
1317 psge += (sizeof(u32) + sizeof(dma_addr_t));
1318
1319 /* response */
1320 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
1321 flagsLength |= rsp->data_len + 4;
1322 dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio),
1323 rsp->data_len, PCI_DMA_BIDIRECTIONAL);
1324 if (!dma_addr_in)
1325 goto unmap;
1326 mpt_add_sge(psge, flagsLength, dma_addr_in);
1327
1328 mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
1329
1330 timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
1331 if (!timeleft) {
1332 printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __FUNCTION__);
1333 /* On timeout reset the board */
1334 mpt_HardResetHandler(ioc, CAN_SLEEP);
1335 ret = -ETIMEDOUT;
1336 goto unmap;
1337 }
1338 mf = NULL;
1339
1340 if (ioc->sas_mgmt.status & MPT_IOCTL_STATUS_RF_VALID) {
1341 SmpPassthroughReply_t *smprep;
1342
1343 smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
1344 memcpy(req->sense, smprep, sizeof(*smprep));
1345 req->sense_len = sizeof(*smprep);
1346 } else {
1347 printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
1348 ioc->name, __FUNCTION__);
1349 ret = -ENXIO;
1350 }
1351 unmap:
1352 if (dma_addr_out)
1353 pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len,
1354 PCI_DMA_BIDIRECTIONAL);
1355 if (dma_addr_in)
1356 pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len,
1357 PCI_DMA_BIDIRECTIONAL);
1358 put_mf:
1359 if (mf)
1360 mpt_free_msg_frame(ioc, mf);
1361 out_unlock:
1362 mutex_unlock(&ioc->sas_mgmt.mutex);
1363 out:
1364 return ret;
1365 }
1366
1367 static struct sas_function_template mptsas_transport_functions = {
1368 .get_linkerrors = mptsas_get_linkerrors,
1369 .get_enclosure_identifier = mptsas_get_enclosure_identifier,
1370 .get_bay_identifier = mptsas_get_bay_identifier,
1371 .phy_reset = mptsas_phy_reset,
1372 .smp_handler = mptsas_smp_handler,
1373 };
1374
1375 static struct scsi_transport_template *mptsas_transport_template;
1376
1377 static int
1378 mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
1379 {
1380 ConfigExtendedPageHeader_t hdr;
1381 CONFIGPARMS cfg;
1382 SasIOUnitPage0_t *buffer;
1383 dma_addr_t dma_handle;
1384 int error, i;
1385
1386 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
1387 hdr.ExtPageLength = 0;
1388 hdr.PageNumber = 0;
1389 hdr.Reserved1 = 0;
1390 hdr.Reserved2 = 0;
1391 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1392 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
1393
1394 cfg.cfghdr.ehdr = &hdr;
1395 cfg.physAddr = -1;
1396 cfg.pageAddr = 0;
1397 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1398 cfg.dir = 0; /* read */
1399 cfg.timeout = 10;
1400
1401 error = mpt_config(ioc, &cfg);
1402 if (error)
1403 goto out;
1404 if (!hdr.ExtPageLength) {
1405 error = -ENXIO;
1406 goto out;
1407 }
1408
1409 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1410 &dma_handle);
1411 if (!buffer) {
1412 error = -ENOMEM;
1413 goto out;
1414 }
1415
1416 cfg.physAddr = dma_handle;
1417 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1418
1419 error = mpt_config(ioc, &cfg);
1420 if (error)
1421 goto out_free_consistent;
1422
1423 port_info->num_phys = buffer->NumPhys;
1424 port_info->phy_info = kcalloc(port_info->num_phys,
1425 sizeof(*port_info->phy_info),GFP_KERNEL);
1426 if (!port_info->phy_info) {
1427 error = -ENOMEM;
1428 goto out_free_consistent;
1429 }
1430
1431 ioc->nvdata_version_persistent =
1432 le16_to_cpu(buffer->NvdataVersionPersistent);
1433 ioc->nvdata_version_default =
1434 le16_to_cpu(buffer->NvdataVersionDefault);
1435
1436 for (i = 0; i < port_info->num_phys; i++) {
1437 mptsas_print_phy_data(ioc, &buffer->PhyData[i]);
1438 port_info->phy_info[i].phy_id = i;
1439 port_info->phy_info[i].port_id =
1440 buffer->PhyData[i].Port;
1441 port_info->phy_info[i].negotiated_link_rate =
1442 buffer->PhyData[i].NegotiatedLinkRate;
1443 port_info->phy_info[i].portinfo = port_info;
1444 port_info->phy_info[i].handle =
1445 le16_to_cpu(buffer->PhyData[i].ControllerDevHandle);
1446 }
1447
1448 out_free_consistent:
1449 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1450 buffer, dma_handle);
1451 out:
1452 return error;
1453 }
1454
1455 static int
1456 mptsas_sas_io_unit_pg1(MPT_ADAPTER *ioc)
1457 {
1458 ConfigExtendedPageHeader_t hdr;
1459 CONFIGPARMS cfg;
1460 SasIOUnitPage1_t *buffer;
1461 dma_addr_t dma_handle;
1462 int error;
1463 u16 device_missing_delay;
1464
1465 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
1466 memset(&cfg, 0, sizeof(CONFIGPARMS));
1467
1468 cfg.cfghdr.ehdr = &hdr;
1469 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1470 cfg.timeout = 10;
1471 cfg.cfghdr.ehdr->PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1472 cfg.cfghdr.ehdr->ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
1473 cfg.cfghdr.ehdr->PageVersion = MPI_SASIOUNITPAGE1_PAGEVERSION;
1474 cfg.cfghdr.ehdr->PageNumber = 1;
1475
1476 error = mpt_config(ioc, &cfg);
1477 if (error)
1478 goto out;
1479 if (!hdr.ExtPageLength) {
1480 error = -ENXIO;
1481 goto out;
1482 }
1483
1484 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1485 &dma_handle);
1486 if (!buffer) {
1487 error = -ENOMEM;
1488 goto out;
1489 }
1490
1491 cfg.physAddr = dma_handle;
1492 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1493
1494 error = mpt_config(ioc, &cfg);
1495 if (error)
1496 goto out_free_consistent;
1497
1498 ioc->io_missing_delay =
1499 le16_to_cpu(buffer->IODeviceMissingDelay);
1500 device_missing_delay = le16_to_cpu(buffer->ReportDeviceMissingDelay);
1501 ioc->device_missing_delay = (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16) ?
1502 (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16 :
1503 device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
1504
1505 out_free_consistent:
1506 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1507 buffer, dma_handle);
1508 out:
1509 return error;
1510 }
1511
1512 static int
1513 mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
1514 u32 form, u32 form_specific)
1515 {
1516 ConfigExtendedPageHeader_t hdr;
1517 CONFIGPARMS cfg;
1518 SasPhyPage0_t *buffer;
1519 dma_addr_t dma_handle;
1520 int error;
1521
1522 hdr.PageVersion = MPI_SASPHY0_PAGEVERSION;
1523 hdr.ExtPageLength = 0;
1524 hdr.PageNumber = 0;
1525 hdr.Reserved1 = 0;
1526 hdr.Reserved2 = 0;
1527 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1528 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
1529
1530 cfg.cfghdr.ehdr = &hdr;
1531 cfg.dir = 0; /* read */
1532 cfg.timeout = 10;
1533
1534 /* Get Phy Pg 0 for each Phy. */
1535 cfg.physAddr = -1;
1536 cfg.pageAddr = form + form_specific;
1537 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1538
1539 error = mpt_config(ioc, &cfg);
1540 if (error)
1541 goto out;
1542
1543 if (!hdr.ExtPageLength) {
1544 error = -ENXIO;
1545 goto out;
1546 }
1547
1548 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1549 &dma_handle);
1550 if (!buffer) {
1551 error = -ENOMEM;
1552 goto out;
1553 }
1554
1555 cfg.physAddr = dma_handle;
1556 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1557
1558 error = mpt_config(ioc, &cfg);
1559 if (error)
1560 goto out_free_consistent;
1561
1562 mptsas_print_phy_pg0(ioc, buffer);
1563
1564 phy_info->hw_link_rate = buffer->HwLinkRate;
1565 phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
1566 phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
1567 phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
1568
1569 out_free_consistent:
1570 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1571 buffer, dma_handle);
1572 out:
1573 return error;
1574 }
1575
1576 static int
1577 mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
1578 u32 form, u32 form_specific)
1579 {
1580 ConfigExtendedPageHeader_t hdr;
1581 CONFIGPARMS cfg;
1582 SasDevicePage0_t *buffer;
1583 dma_addr_t dma_handle;
1584 __le64 sas_address;
1585 int error=0;
1586
1587 if (ioc->sas_discovery_runtime &&
1588 mptsas_is_end_device(device_info))
1589 goto out;
1590
1591 hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
1592 hdr.ExtPageLength = 0;
1593 hdr.PageNumber = 0;
1594 hdr.Reserved1 = 0;
1595 hdr.Reserved2 = 0;
1596 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1597 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE;
1598
1599 cfg.cfghdr.ehdr = &hdr;
1600 cfg.pageAddr = form + form_specific;
1601 cfg.physAddr = -1;
1602 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1603 cfg.dir = 0; /* read */
1604 cfg.timeout = 10;
1605
1606 memset(device_info, 0, sizeof(struct mptsas_devinfo));
1607 error = mpt_config(ioc, &cfg);
1608 if (error)
1609 goto out;
1610 if (!hdr.ExtPageLength) {
1611 error = -ENXIO;
1612 goto out;
1613 }
1614
1615 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1616 &dma_handle);
1617 if (!buffer) {
1618 error = -ENOMEM;
1619 goto out;
1620 }
1621
1622 cfg.physAddr = dma_handle;
1623 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1624
1625 error = mpt_config(ioc, &cfg);
1626 if (error)
1627 goto out_free_consistent;
1628
1629 mptsas_print_device_pg0(ioc, buffer);
1630
1631 device_info->handle = le16_to_cpu(buffer->DevHandle);
1632 device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
1633 device_info->handle_enclosure =
1634 le16_to_cpu(buffer->EnclosureHandle);
1635 device_info->slot = le16_to_cpu(buffer->Slot);
1636 device_info->phy_id = buffer->PhyNum;
1637 device_info->port_id = buffer->PhysicalPort;
1638 device_info->id = buffer->TargetID;
1639 device_info->phys_disk_num = ~0;
1640 device_info->channel = buffer->Bus;
1641 memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
1642 device_info->sas_address = le64_to_cpu(sas_address);
1643 device_info->device_info =
1644 le32_to_cpu(buffer->DeviceInfo);
1645
1646 out_free_consistent:
1647 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1648 buffer, dma_handle);
1649 out:
1650 return error;
1651 }
1652
1653 static int
1654 mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
1655 u32 form, u32 form_specific)
1656 {
1657 ConfigExtendedPageHeader_t hdr;
1658 CONFIGPARMS cfg;
1659 SasExpanderPage0_t *buffer;
1660 dma_addr_t dma_handle;
1661 int i, error;
1662
1663 hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
1664 hdr.ExtPageLength = 0;
1665 hdr.PageNumber = 0;
1666 hdr.Reserved1 = 0;
1667 hdr.Reserved2 = 0;
1668 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1669 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
1670
1671 cfg.cfghdr.ehdr = &hdr;
1672 cfg.physAddr = -1;
1673 cfg.pageAddr = form + form_specific;
1674 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1675 cfg.dir = 0; /* read */
1676 cfg.timeout = 10;
1677
1678 memset(port_info, 0, sizeof(struct mptsas_portinfo));
1679 error = mpt_config(ioc, &cfg);
1680 if (error)
1681 goto out;
1682
1683 if (!hdr.ExtPageLength) {
1684 error = -ENXIO;
1685 goto out;
1686 }
1687
1688 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1689 &dma_handle);
1690 if (!buffer) {
1691 error = -ENOMEM;
1692 goto out;
1693 }
1694
1695 cfg.physAddr = dma_handle;
1696 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1697
1698 error = mpt_config(ioc, &cfg);
1699 if (error)
1700 goto out_free_consistent;
1701
1702 /* save config data */
1703 port_info->num_phys = buffer->NumPhys;
1704 port_info->phy_info = kcalloc(port_info->num_phys,
1705 sizeof(*port_info->phy_info),GFP_KERNEL);
1706 if (!port_info->phy_info) {
1707 error = -ENOMEM;
1708 goto out_free_consistent;
1709 }
1710
1711 for (i = 0; i < port_info->num_phys; i++) {
1712 port_info->phy_info[i].portinfo = port_info;
1713 port_info->phy_info[i].handle =
1714 le16_to_cpu(buffer->DevHandle);
1715 }
1716
1717 out_free_consistent:
1718 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1719 buffer, dma_handle);
1720 out:
1721 return error;
1722 }
1723
1724 static int
1725 mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
1726 u32 form, u32 form_specific)
1727 {
1728 ConfigExtendedPageHeader_t hdr;
1729 CONFIGPARMS cfg;
1730 SasExpanderPage1_t *buffer;
1731 dma_addr_t dma_handle;
1732 int error=0;
1733
1734 if (ioc->sas_discovery_runtime &&
1735 mptsas_is_end_device(&phy_info->attached))
1736 goto out;
1737
1738 hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
1739 hdr.ExtPageLength = 0;
1740 hdr.PageNumber = 1;
1741 hdr.Reserved1 = 0;
1742 hdr.Reserved2 = 0;
1743 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1744 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
1745
1746 cfg.cfghdr.ehdr = &hdr;
1747 cfg.physAddr = -1;
1748 cfg.pageAddr = form + form_specific;
1749 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1750 cfg.dir = 0; /* read */
1751 cfg.timeout = 10;
1752
1753 error = mpt_config(ioc, &cfg);
1754 if (error)
1755 goto out;
1756
1757 if (!hdr.ExtPageLength) {
1758 error = -ENXIO;
1759 goto out;
1760 }
1761
1762 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1763 &dma_handle);
1764 if (!buffer) {
1765 error = -ENOMEM;
1766 goto out;
1767 }
1768
1769 cfg.physAddr = dma_handle;
1770 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1771
1772 error = mpt_config(ioc, &cfg);
1773 if (error)
1774 goto out_free_consistent;
1775
1776
1777 mptsas_print_expander_pg1(ioc, buffer);
1778
1779 /* save config data */
1780 phy_info->phy_id = buffer->PhyIdentifier;
1781 phy_info->port_id = buffer->PhysicalPort;
1782 phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
1783 phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
1784 phy_info->hw_link_rate = buffer->HwLinkRate;
1785 phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
1786 phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
1787
1788 out_free_consistent:
1789 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1790 buffer, dma_handle);
1791 out:
1792 return error;
1793 }
1794
1795 static void
1796 mptsas_parse_device_info(struct sas_identify *identify,
1797 struct mptsas_devinfo *device_info)
1798 {
1799 u16 protocols;
1800
1801 identify->sas_address = device_info->sas_address;
1802 identify->phy_identifier = device_info->phy_id;
1803
1804 /*
1805 * Fill in Phy Initiator Port Protocol.
1806 * Bits 6:3, more than one bit can be set, fall through cases.
1807 */
1808 protocols = device_info->device_info & 0x78;
1809 identify->initiator_port_protocols = 0;
1810 if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR)
1811 identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
1812 if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR)
1813 identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
1814 if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR)
1815 identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
1816 if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST)
1817 identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
1818
1819 /*
1820 * Fill in Phy Target Port Protocol.
1821 * Bits 10:7, more than one bit can be set, fall through cases.
1822 */
1823 protocols = device_info->device_info & 0x780;
1824 identify->target_port_protocols = 0;
1825 if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET)
1826 identify->target_port_protocols |= SAS_PROTOCOL_SSP;
1827 if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET)
1828 identify->target_port_protocols |= SAS_PROTOCOL_STP;
1829 if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET)
1830 identify->target_port_protocols |= SAS_PROTOCOL_SMP;
1831 if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
1832 identify->target_port_protocols |= SAS_PROTOCOL_SATA;
1833
1834 /*
1835 * Fill in Attached device type.
1836 */
1837 switch (device_info->device_info &
1838 MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
1839 case MPI_SAS_DEVICE_INFO_NO_DEVICE:
1840 identify->device_type = SAS_PHY_UNUSED;
1841 break;
1842 case MPI_SAS_DEVICE_INFO_END_DEVICE:
1843 identify->device_type = SAS_END_DEVICE;
1844 break;
1845 case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER:
1846 identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
1847 break;
1848 case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER:
1849 identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
1850 break;
1851 }
1852 }
1853
1854 static int mptsas_probe_one_phy(struct device *dev,
1855 struct mptsas_phyinfo *phy_info, int index, int local)
1856 {
1857 MPT_ADAPTER *ioc;
1858 struct sas_phy *phy;
1859 struct sas_port *port;
1860 int error = 0;
1861
1862 if (!dev) {
1863 error = -ENODEV;
1864 goto out;
1865 }
1866
1867 if (!phy_info->phy) {
1868 phy = sas_phy_alloc(dev, index);
1869 if (!phy) {
1870 error = -ENOMEM;
1871 goto out;
1872 }
1873 } else
1874 phy = phy_info->phy;
1875
1876 mptsas_parse_device_info(&phy->identify, &phy_info->identify);
1877
1878 /*
1879 * Set Negotiated link rate.
1880 */
1881 switch (phy_info->negotiated_link_rate) {
1882 case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED:
1883 phy->negotiated_linkrate = SAS_PHY_DISABLED;
1884 break;
1885 case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION:
1886 phy->negotiated_linkrate = SAS_LINK_RATE_FAILED;
1887 break;
1888 case MPI_SAS_IOUNIT0_RATE_1_5:
1889 phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
1890 break;
1891 case MPI_SAS_IOUNIT0_RATE_3_0:
1892 phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
1893 break;
1894 case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
1895 case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
1896 default:
1897 phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
1898 break;
1899 }
1900
1901 /*
1902 * Set Max hardware link rate.
1903 */
1904 switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
1905 case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5:
1906 phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
1907 break;
1908 case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
1909 phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
1910 break;
1911 default:
1912 break;
1913 }
1914
1915 /*
1916 * Set Max programmed link rate.
1917 */
1918 switch (phy_info->programmed_link_rate &
1919 MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
1920 case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5:
1921 phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS;
1922 break;
1923 case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
1924 phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
1925 break;
1926 default:
1927 break;
1928 }
1929
1930 /*
1931 * Set Min hardware link rate.
1932 */
1933 switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) {
1934 case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5:
1935 phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
1936 break;
1937 case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
1938 phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
1939 break;
1940 default:
1941 break;
1942 }
1943
1944 /*
1945 * Set Min programmed link rate.
1946 */
1947 switch (phy_info->programmed_link_rate &
1948 MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) {
1949 case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5:
1950 phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
1951 break;
1952 case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
1953 phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS;
1954 break;
1955 default:
1956 break;
1957 }
1958
1959 if (!phy_info->phy) {
1960
1961 error = sas_phy_add(phy);
1962 if (error) {
1963 sas_phy_free(phy);
1964 goto out;
1965 }
1966 phy_info->phy = phy;
1967 }
1968
1969 if (!phy_info->attached.handle ||
1970 !phy_info->port_details)
1971 goto out;
1972
1973 port = mptsas_get_port(phy_info);
1974 ioc = phy_to_ioc(phy_info->phy);
1975
1976 if (phy_info->sas_port_add_phy) {
1977
1978 if (!port) {
1979 port = sas_port_alloc_num(dev);
1980 if (!port) {
1981 error = -ENOMEM;
1982 goto out;
1983 }
1984 error = sas_port_add(port);
1985 if (error) {
1986 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1987 "%s: exit at line=%d\n", ioc->name,
1988 __FUNCTION__, __LINE__));
1989 goto out;
1990 }
1991 mptsas_set_port(ioc, phy_info, port);
1992 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1993 "sas_port_alloc: port=%p dev=%p port_id=%d\n",
1994 ioc->name, port, dev, port->port_identifier));
1995 }
1996 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
1997 ioc->name, phy_info->phy_id));
1998 sas_port_add_phy(port, phy_info->phy);
1999 phy_info->sas_port_add_phy = 0;
2000 }
2001
2002 if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
2003
2004 struct sas_rphy *rphy;
2005 struct device *parent;
2006 struct sas_identify identify;
2007
2008 parent = dev->parent->parent;
2009 /*
2010 * Let the hotplug_work thread handle processing
2011 * the adding/removing of devices that occur
2012 * after start of day.
2013 */
2014 if (ioc->sas_discovery_runtime &&
2015 mptsas_is_end_device(&phy_info->attached))
2016 goto out;
2017
2018 mptsas_parse_device_info(&identify, &phy_info->attached);
2019 if (scsi_is_host_device(parent)) {
2020 struct mptsas_portinfo *port_info;
2021 int i;
2022
2023 mutex_lock(&ioc->sas_topology_mutex);
2024 port_info = mptsas_find_portinfo_by_handle(ioc,
2025 ioc->handle);
2026 mutex_unlock(&ioc->sas_topology_mutex);
2027
2028 for (i = 0; i < port_info->num_phys; i++)
2029 if (port_info->phy_info[i].identify.sas_address ==
2030 identify.sas_address) {
2031 sas_port_mark_backlink(port);
2032 goto out;
2033 }
2034
2035 } else if (scsi_is_sas_rphy(parent)) {
2036 struct sas_rphy *parent_rphy = dev_to_rphy(parent);
2037 if (identify.sas_address ==
2038 parent_rphy->identify.sas_address) {
2039 sas_port_mark_backlink(port);
2040 goto out;
2041 }
2042 }
2043
2044 switch (identify.device_type) {
2045 case SAS_END_DEVICE:
2046 rphy = sas_end_device_alloc(port);
2047 break;
2048 case SAS_EDGE_EXPANDER_DEVICE:
2049 case SAS_FANOUT_EXPANDER_DEVICE:
2050 rphy = sas_expander_alloc(port, identify.device_type);
2051 break;
2052 default:
2053 rphy = NULL;
2054 break;
2055 }
2056 if (!rphy) {
2057 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2058 "%s: exit at line=%d\n", ioc->name,
2059 __FUNCTION__, __LINE__));
2060 goto out;
2061 }
2062
2063 rphy->identify = identify;
2064 error = sas_rphy_add(rphy);
2065 if (error) {
2066 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2067 "%s: exit at line=%d\n", ioc->name,
2068 __FUNCTION__, __LINE__));
2069 sas_rphy_free(rphy);
2070 goto out;
2071 }
2072 mptsas_set_rphy(ioc, phy_info, rphy);
2073 }
2074
2075 out:
2076 return error;
2077 }
2078
2079 static int
2080 mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
2081 {
2082 struct mptsas_portinfo *port_info, *hba;
2083 int error = -ENOMEM, i;
2084
2085 hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
2086 if (! hba)
2087 goto out;
2088
2089 error = mptsas_sas_io_unit_pg0(ioc, hba);
2090 if (error)
2091 goto out_free_port_info;
2092
2093 mptsas_sas_io_unit_pg1(ioc);
2094 mutex_lock(&ioc->sas_topology_mutex);
2095 ioc->handle = hba->phy_info[0].handle;
2096 port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
2097 if (!port_info) {
2098 port_info = hba;
2099 list_add_tail(&port_info->list, &ioc->sas_topology);
2100 } else {
2101 for (i = 0; i < hba->num_phys; i++) {
2102 port_info->phy_info[i].negotiated_link_rate =
2103 hba->phy_info[i].negotiated_link_rate;
2104 port_info->phy_info[i].handle =
2105 hba->phy_info[i].handle;
2106 port_info->phy_info[i].port_id =
2107 hba->phy_info[i].port_id;
2108 }
2109 kfree(hba->phy_info);
2110 kfree(hba);
2111 hba = NULL;
2112 }
2113 mutex_unlock(&ioc->sas_topology_mutex);
2114 for (i = 0; i < port_info->num_phys; i++) {
2115 mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
2116 (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
2117 MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
2118
2119 mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
2120 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2121 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2122 port_info->phy_info[i].handle);
2123 port_info->phy_info[i].identify.phy_id =
2124 port_info->phy_info[i].phy_id = i;
2125 if (port_info->phy_info[i].attached.handle)
2126 mptsas_sas_device_pg0(ioc,
2127 &port_info->phy_info[i].attached,
2128 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2129 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2130 port_info->phy_info[i].attached.handle);
2131 }
2132
2133 mptsas_setup_wide_ports(ioc, port_info);
2134
2135 for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
2136 mptsas_probe_one_phy(&ioc->sh->shost_gendev,
2137 &port_info->phy_info[i], ioc->sas_index, 1);
2138
2139 return 0;
2140
2141 out_free_port_info:
2142 kfree(hba);
2143 out:
2144 return error;
2145 }
2146
2147 static int
2148 mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
2149 {
2150 struct mptsas_portinfo *port_info, *p, *ex;
2151 struct device *parent;
2152 struct sas_rphy *rphy;
2153 int error = -ENOMEM, i, j;
2154
2155 ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
2156 if (!ex)
2157 goto out;
2158
2159 error = mptsas_sas_expander_pg0(ioc, ex,
2160 (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
2161 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
2162 if (error)
2163 goto out_free_port_info;
2164
2165 *handle = ex->phy_info[0].handle;
2166
2167 mutex_lock(&ioc->sas_topology_mutex);
2168 port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
2169 if (!port_info) {
2170 port_info = ex;
2171 list_add_tail(&port_info->list, &ioc->sas_topology);
2172 } else {
2173 for (i = 0; i < ex->num_phys; i++) {
2174 port_info->phy_info[i].handle =
2175 ex->phy_info[i].handle;
2176 port_info->phy_info[i].port_id =
2177 ex->phy_info[i].port_id;
2178 }
2179 kfree(ex->phy_info);
2180 kfree(ex);
2181 ex = NULL;
2182 }
2183 mutex_unlock(&ioc->sas_topology_mutex);
2184
2185 for (i = 0; i < port_info->num_phys; i++) {
2186 mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
2187 (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
2188 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
2189
2190 if (port_info->phy_info[i].identify.handle) {
2191 mptsas_sas_device_pg0(ioc,
2192 &port_info->phy_info[i].identify,
2193 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2194 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2195 port_info->phy_info[i].identify.handle);
2196 port_info->phy_info[i].identify.phy_id =
2197 port_info->phy_info[i].phy_id;
2198 }
2199
2200 if (port_info->phy_info[i].attached.handle) {
2201 mptsas_sas_device_pg0(ioc,
2202 &port_info->phy_info[i].attached,
2203 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2204 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2205 port_info->phy_info[i].attached.handle);
2206 port_info->phy_info[i].attached.phy_id =
2207 port_info->phy_info[i].phy_id;
2208 }
2209 }
2210
2211 parent = &ioc->sh->shost_gendev;
2212 for (i = 0; i < port_info->num_phys; i++) {
2213 mutex_lock(&ioc->sas_topology_mutex);
2214 list_for_each_entry(p, &ioc->sas_topology, list) {
2215 for (j = 0; j < p->num_phys; j++) {
2216 if (port_info->phy_info[i].identify.handle !=
2217 p->phy_info[j].attached.handle)
2218 continue;
2219 rphy = mptsas_get_rphy(&p->phy_info[j]);
2220 parent = &rphy->dev;
2221 }
2222 }
2223 mutex_unlock(&ioc->sas_topology_mutex);
2224 }
2225
2226 mptsas_setup_wide_ports(ioc, port_info);
2227
2228 for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
2229 mptsas_probe_one_phy(parent, &port_info->phy_info[i],
2230 ioc->sas_index, 0);
2231
2232 return 0;
2233
2234 out_free_port_info:
2235 if (ex) {
2236 kfree(ex->phy_info);
2237 kfree(ex);
2238 }
2239 out:
2240 return error;
2241 }
2242
2243 /*
2244 * mptsas_delete_expander_phys
2245 *
2246 *
2247 * This will traverse topology, and remove expanders
2248 * that are no longer present
2249 */
2250 static void
2251 mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
2252 {
2253 struct mptsas_portinfo buffer;
2254 struct mptsas_portinfo *port_info, *n, *parent;
2255 struct mptsas_phyinfo *phy_info;
2256 struct sas_port * port;
2257 int i;
2258 u64 expander_sas_address;
2259
2260 mutex_lock(&ioc->sas_topology_mutex);
2261 list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
2262
2263 if (port_info->phy_info &&
2264 (!(port_info->phy_info[0].identify.device_info &
2265 MPI_SAS_DEVICE_INFO_SMP_TARGET)))
2266 continue;
2267
2268 if (mptsas_sas_expander_pg0(ioc, &buffer,
2269 (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
2270 MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
2271 port_info->phy_info[0].handle)) {
2272
2273 /*
2274 * Obtain the port_info instance to the parent port
2275 */
2276 parent = mptsas_find_portinfo_by_handle(ioc,
2277 port_info->phy_info[0].identify.handle_parent);
2278
2279 if (!parent)
2280 goto next_port;
2281
2282 expander_sas_address =
2283 port_info->phy_info[0].identify.sas_address;
2284
2285 /*
2286 * Delete rphys in the parent that point
2287 * to this expander. The transport layer will
2288 * cleanup all the children.
2289 */
2290 phy_info = parent->phy_info;
2291 for (i = 0; i < parent->num_phys; i++, phy_info++) {
2292 port = mptsas_get_port(phy_info);
2293 if (!port)
2294 continue;
2295 if (phy_info->attached.sas_address !=
2296 expander_sas_address)
2297 continue;
2298 dsaswideprintk(ioc,
2299 dev_printk(KERN_DEBUG, &port->dev,
2300 MYIOC_s_FMT "delete port (%d)\n", ioc->name,
2301 port->port_identifier));
2302 sas_port_delete(port);
2303 mptsas_port_delete(ioc, phy_info->port_details);
2304 }
2305 next_port:
2306
2307 phy_info = port_info->phy_info;
2308 for (i = 0; i < port_info->num_phys; i++, phy_info++)
2309 mptsas_port_delete(ioc, phy_info->port_details);
2310
2311 list_del(&port_info->list);
2312 kfree(port_info->phy_info);
2313 kfree(port_info);
2314 }
2315 /*
2316 * Free this memory allocated from inside
2317 * mptsas_sas_expander_pg0
2318 */
2319 kfree(buffer.phy_info);
2320 }
2321 mutex_unlock(&ioc->sas_topology_mutex);
2322 }
2323
2324 /*
2325 * Start of day discovery
2326 */
2327 static void
2328 mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
2329 {
2330 u32 handle = 0xFFFF;
2331 int i;
2332
2333 mutex_lock(&ioc->sas_discovery_mutex);
2334 mptsas_probe_hba_phys(ioc);
2335 while (!mptsas_probe_expander_phys(ioc, &handle))
2336 ;
2337 /*
2338 Reporting RAID volumes.
2339 */
2340 if (!ioc->ir_firmware)
2341 goto out;
2342 if (!ioc->raid_data.pIocPg2)
2343 goto out;
2344 if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
2345 goto out;
2346 for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
2347 scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
2348 ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
2349 }
2350 out:
2351 mutex_unlock(&ioc->sas_discovery_mutex);
2352 }
2353
2354 /*
2355 * Work queue thread to handle Runtime discovery
2356 * Mere purpose is the hot add/delete of expanders
2357 *(Mutex UNLOCKED)
2358 */
2359 static void
2360 __mptsas_discovery_work(MPT_ADAPTER *ioc)
2361 {
2362 u32 handle = 0xFFFF;
2363
2364 ioc->sas_discovery_runtime=1;
2365 mptsas_delete_expander_phys(ioc);
2366 mptsas_probe_hba_phys(ioc);
2367 while (!mptsas_probe_expander_phys(ioc, &handle))
2368 ;
2369 ioc->sas_discovery_runtime=0;
2370 }
2371
2372 /*
2373 * Work queue thread to handle Runtime discovery
2374 * Mere purpose is the hot add/delete of expanders
2375 *(Mutex LOCKED)
2376 */
2377 static void
2378 mptsas_discovery_work(struct work_struct *work)
2379 {
2380 struct mptsas_discovery_event *ev =
2381 container_of(work, struct mptsas_discovery_event, work);
2382 MPT_ADAPTER *ioc = ev->ioc;
2383
2384 mutex_lock(&ioc->sas_discovery_mutex);
2385 __mptsas_discovery_work(ioc);
2386 mutex_unlock(&ioc->sas_discovery_mutex);
2387 kfree(ev);
2388 }
2389
2390 static struct mptsas_phyinfo *
2391 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
2392 {
2393 struct mptsas_portinfo *port_info;
2394 struct mptsas_phyinfo *phy_info = NULL;
2395 int i;
2396
2397 mutex_lock(&ioc->sas_topology_mutex);
2398 list_for_each_entry(port_info, &ioc->sas_topology, list) {
2399 for (i = 0; i < port_info->num_phys; i++) {
2400 if (!mptsas_is_end_device(
2401 &port_info->phy_info[i].attached))
2402 continue;
2403 if (port_info->phy_info[i].attached.sas_address
2404 != sas_address)
2405 continue;
2406 phy_info = &port_info->phy_info[i];
2407 break;
2408 }
2409 }
2410 mutex_unlock(&ioc->sas_topology_mutex);
2411 return phy_info;
2412 }
2413
2414 static struct mptsas_phyinfo *
2415 mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
2416 {
2417 struct mptsas_portinfo *port_info;
2418 struct mptsas_phyinfo *phy_info = NULL;
2419 int i;
2420
2421 mutex_lock(&ioc->sas_topology_mutex);
2422 list_for_each_entry(port_info, &ioc->sas_topology, list) {
2423 for (i = 0; i < port_info->num_phys; i++) {
2424 if (!mptsas_is_end_device(
2425 &port_info->phy_info[i].attached))
2426 continue;
2427 if (port_info->phy_info[i].attached.id != id)
2428 continue;
2429 if (port_info->phy_info[i].attached.channel != channel)
2430 continue;
2431 phy_info = &port_info->phy_info[i];
2432 break;
2433 }
2434 }
2435 mutex_unlock(&ioc->sas_topology_mutex);
2436 return phy_info;
2437 }
2438
2439 static struct mptsas_phyinfo *
2440 mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2441 {
2442 struct mptsas_portinfo *port_info;
2443 struct mptsas_phyinfo *phy_info = NULL;
2444 int i;
2445
2446 mutex_lock(&ioc->sas_topology_mutex);
2447 list_for_each_entry(port_info, &ioc->sas_topology, list) {
2448 for (i = 0; i < port_info->num_phys; i++) {
2449 if (!mptsas_is_end_device(
2450 &port_info->phy_info[i].attached))
2451 continue;
2452 if (port_info->phy_info[i].attached.phys_disk_num == ~0)
2453 continue;
2454 if (port_info->phy_info[i].attached.phys_disk_num != id)
2455 continue;
2456 if (port_info->phy_info[i].attached.channel != channel)
2457 continue;
2458 phy_info = &port_info->phy_info[i];
2459 break;
2460 }
2461 }
2462 mutex_unlock(&ioc->sas_topology_mutex);
2463 return phy_info;
2464 }
2465
2466 /*
2467 * Work queue thread to clear the persitency table
2468 */
2469 static void
2470 mptsas_persist_clear_table(struct work_struct *work)
2471 {
2472 MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
2473
2474 mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
2475 }
2476
2477 static void
2478 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
2479 {
2480 int rc;
2481
2482 sdev->no_uld_attach = data ? 1 : 0;
2483 rc = scsi_device_reprobe(sdev);
2484 }
2485
2486 static void
2487 mptsas_reprobe_target(struct scsi_target *starget, int uld_attach)
2488 {
2489 starget_for_each_device(starget, uld_attach ? (void *)1 : NULL,
2490 mptsas_reprobe_lun);
2491 }
2492
2493 static void
2494 mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
2495 {
2496 CONFIGPARMS cfg;
2497 ConfigPageHeader_t hdr;
2498 dma_addr_t dma_handle;
2499 pRaidVolumePage0_t buffer = NULL;
2500 RaidPhysDiskPage0_t phys_disk;
2501 int i;
2502 struct mptsas_hotplug_event *ev;
2503
2504 memset(&cfg, 0 , sizeof(CONFIGPARMS));
2505 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
2506 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
2507 cfg.pageAddr = (channel << 8) + id;
2508 cfg.cfghdr.hdr = &hdr;
2509 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
2510
2511 if (mpt_config(ioc, &cfg) != 0)
2512 goto out;
2513
2514 if (!hdr.PageLength)
2515 goto out;
2516
2517 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
2518 &dma_handle);
2519
2520 if (!buffer)
2521 goto out;
2522
2523 cfg.physAddr = dma_handle;
2524 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2525
2526 if (mpt_config(ioc, &cfg) != 0)
2527 goto out;
2528
2529 if (!(buffer->VolumeStatus.Flags &
2530 MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE))
2531 goto out;
2532
2533 if (!buffer->NumPhysDisks)
2534 goto out;
2535
2536 for (i = 0; i < buffer->NumPhysDisks; i++) {
2537
2538 if (mpt_raid_phys_disk_pg0(ioc,
2539 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
2540 continue;
2541
2542 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
2543 if (!ev) {
2544 printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
2545 goto out;
2546 }
2547
2548 INIT_WORK(&ev->work, mptsas_hotplug_work);
2549 ev->ioc = ioc;
2550 ev->id = phys_disk.PhysDiskID;
2551 ev->channel = phys_disk.PhysDiskBus;
2552 ev->phys_disk_num_valid = 1;
2553 ev->phys_disk_num = phys_disk.PhysDiskNum;
2554 ev->event_type = MPTSAS_ADD_DEVICE;
2555 schedule_work(&ev->work);
2556 }
2557
2558 out:
2559 if (buffer)
2560 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
2561 dma_handle);
2562 }
2563 /*
2564 * Work queue thread to handle SAS hotplug events
2565 */
2566 static void
2567 mptsas_hotplug_work(struct work_struct *work)
2568 {
2569 struct mptsas_hotplug_event *ev =
2570 container_of(work, struct mptsas_hotplug_event, work);
2571
2572 MPT_ADAPTER *ioc = ev->ioc;
2573 struct mptsas_phyinfo *phy_info;
2574 struct sas_rphy *rphy;
2575 struct sas_port *port;
2576 struct scsi_device *sdev;
2577 struct scsi_target * starget;
2578 struct sas_identify identify;
2579 char *ds = NULL;
2580 struct mptsas_devinfo sas_device;
2581 VirtTarget *vtarget;
2582 VirtDevice *vdevice;
2583
2584 mutex_lock(&ioc->sas_discovery_mutex);
2585 switch (ev->event_type) {
2586 case MPTSAS_DEL_DEVICE:
2587
2588 phy_info = NULL;
2589 if (ev->phys_disk_num_valid) {
2590 if (ev->hidden_raid_component){
2591 if (mptsas_sas_device_pg0(ioc, &sas_device,
2592 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
2593 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2594 (ev->channel << 8) + ev->id)) {
2595 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2596 "%s: exit at line=%d\n", ioc->name,
2597 __FUNCTION__, __LINE__));
2598 break;
2599 }
2600 phy_info = mptsas_find_phyinfo_by_sas_address(
2601 ioc, sas_device.sas_address);
2602 }else
2603 phy_info = mptsas_find_phyinfo_by_phys_disk_num(
2604 ioc, ev->channel, ev->phys_disk_num);
2605 }
2606
2607 if (!phy_info)
2608 phy_info = mptsas_find_phyinfo_by_target(ioc,
2609 ev->channel, ev->id);
2610
2611 /*
2612 * Sanity checks, for non-existing phys and remote rphys.
2613 */
2614 if (!phy_info){
2615 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2616 "%s: exit at line=%d\n", ioc->name,
2617 __FUNCTION__, __LINE__));
2618 break;
2619 }
2620 if (!phy_info->port_details) {
2621 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2622 "%s: exit at line=%d\n", ioc->name,
2623 __FUNCTION__, __LINE__));
2624 break;
2625 }
2626 rphy = mptsas_get_rphy(phy_info);
2627 if (!rphy) {
2628 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2629 "%s: exit at line=%d\n", ioc->name,
2630 __FUNCTION__, __LINE__));
2631 break;
2632 }
2633
2634 port = mptsas_get_port(phy_info);
2635 if (!port) {
2636 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2637 "%s: exit at line=%d\n", ioc->name,
2638 __FUNCTION__, __LINE__));
2639 break;
2640 }
2641
2642 starget = mptsas_get_starget(phy_info);
2643 if (starget) {
2644 vtarget = starget->hostdata;
2645
2646 if (!vtarget) {
2647 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2648 "%s: exit at line=%d\n", ioc->name,
2649 __FUNCTION__, __LINE__));
2650 break;
2651 }
2652
2653 /*
2654 * Handling RAID components
2655 */
2656 if (ev->phys_disk_num_valid &&
2657 ev->hidden_raid_component) {
2658 printk(MYIOC_s_INFO_FMT
2659 "RAID Hidding: channel=%d, id=%d, "
2660 "physdsk %d \n", ioc->name, ev->channel,
2661 ev->id, ev->phys_disk_num);
2662 vtarget->id = ev->phys_disk_num;
2663 vtarget->tflags |=
2664 MPT_TARGET_FLAGS_RAID_COMPONENT;
2665 mptsas_reprobe_target(starget, 1);
2666 phy_info->attached.phys_disk_num =
2667 ev->phys_disk_num;
2668 break;
2669 }
2670 }
2671
2672 if (phy_info->attached.device_info &
2673 MPI_SAS_DEVICE_INFO_SSP_TARGET)
2674 ds = "ssp";
2675 if (phy_info->attached.device_info &
2676 MPI_SAS_DEVICE_INFO_STP_TARGET)
2677 ds = "stp";
2678 if (phy_info->attached.device_info &
2679 MPI_SAS_DEVICE_INFO_SATA_DEVICE)
2680 ds = "sata";
2681
2682 printk(MYIOC_s_INFO_FMT
2683 "removing %s device, channel %d, id %d, phy %d\n",
2684 ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
2685 dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
2686 "delete port (%d)\n", ioc->name, port->port_identifier);
2687 sas_port_delete(port);
2688 mptsas_port_delete(ioc, phy_info->port_details);
2689 break;
2690 case MPTSAS_ADD_DEVICE:
2691
2692 if (ev->phys_disk_num_valid)
2693 mpt_findImVolumes(ioc);
2694
2695 /*
2696 * Refresh sas device pg0 data
2697 */
2698 if (mptsas_sas_device_pg0(ioc, &sas_device,
2699 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
2700 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2701 (ev->channel << 8) + ev->id)) {
2702 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2703 "%s: exit at line=%d\n", ioc->name,
2704 __FUNCTION__, __LINE__));
2705 break;
2706 }
2707
2708 __mptsas_discovery_work(ioc);
2709
2710 phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
2711 sas_device.sas_address);
2712
2713 if (!phy_info || !phy_info->port_details) {
2714 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2715 "%s: exit at line=%d\n", ioc->name,
2716 __FUNCTION__, __LINE__));
2717 break;
2718 }
2719
2720 starget = mptsas_get_starget(phy_info);
2721 if (starget && (!ev->hidden_raid_component)){
2722
2723 vtarget = starget->hostdata;
2724
2725 if (!vtarget) {
2726 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2727 "%s: exit at line=%d\n", ioc->name,
2728 __FUNCTION__, __LINE__));
2729 break;
2730 }
2731 /*
2732 * Handling RAID components
2733 */
2734 if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
2735 printk(MYIOC_s_INFO_FMT
2736 "RAID Exposing: channel=%d, id=%d, "
2737 "physdsk %d \n", ioc->name, ev->channel,
2738 ev->id, ev->phys_disk_num);
2739 vtarget->tflags &=
2740 ~MPT_TARGET_FLAGS_RAID_COMPONENT;
2741 vtarget->id = ev->id;
2742 mptsas_reprobe_target(starget, 0);
2743 phy_info->attached.phys_disk_num = ~0;
2744 }
2745 break;
2746 }
2747
2748 if (mptsas_get_rphy(phy_info)) {
2749 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2750 "%s: exit at line=%d\n", ioc->name,
2751 __FUNCTION__, __LINE__));
2752 if (ev->channel) printk("%d\n", __LINE__);
2753 break;
2754 }
2755
2756 port = mptsas_get_port(phy_info);
2757 if (!port) {
2758 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2759 "%s: exit at line=%d\n", ioc->name,
2760 __FUNCTION__, __LINE__));
2761 break;
2762 }
2763 memcpy(&phy_info->attached, &sas_device,
2764 sizeof(struct mptsas_devinfo));
2765
2766 if (phy_info->attached.device_info &
2767 MPI_SAS_DEVICE_INFO_SSP_TARGET)
2768 ds = "ssp";
2769 if (phy_info->attached.device_info &
2770 MPI_SAS_DEVICE_INFO_STP_TARGET)
2771 ds = "stp";
2772 if (phy_info->attached.device_info &
2773 MPI_SAS_DEVICE_INFO_SATA_DEVICE)
2774 ds = "sata";
2775
2776 printk(MYIOC_s_INFO_FMT
2777 "attaching %s device, channel %d, id %d, phy %d\n",
2778 ioc->name, ds, ev->channel, ev->id, ev->phy_id);
2779
2780 mptsas_parse_device_info(&identify, &phy_info->attached);
2781 rphy = sas_end_device_alloc(port);
2782 if (!rphy) {
2783 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2784 "%s: exit at line=%d\n", ioc->name,
2785 __FUNCTION__, __LINE__));
2786 break; /* non-fatal: an rphy can be added later */
2787 }
2788
2789 rphy->identify = identify;
2790 if (sas_rphy_add(rphy)) {
2791 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2792 "%s: exit at line=%d\n", ioc->name,
2793 __FUNCTION__, __LINE__));
2794 sas_rphy_free(rphy);
2795 break;
2796 }
2797 mptsas_set_rphy(ioc, phy_info, rphy);
2798 break;
2799 case MPTSAS_ADD_RAID:
2800 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
2801 ev->id, 0);
2802 if (sdev) {
2803 scsi_device_put(sdev);
2804 break;
2805 }
2806 printk(MYIOC_s_INFO_FMT
2807 "attaching raid volume, channel %d, id %d\n",
2808 ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
2809 scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
2810 mpt_findImVolumes(ioc);
2811 break;
2812 case MPTSAS_DEL_RAID:
2813 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
2814 ev->id, 0);
2815 if (!sdev)
2816 break;
2817 printk(MYIOC_s_INFO_FMT
2818 "removing raid volume, channel %d, id %d\n",
2819 ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
2820 vdevice = sdev->hostdata;
2821 scsi_remove_device(sdev);
2822 scsi_device_put(sdev);
2823 mpt_findImVolumes(ioc);
2824 break;
2825 case MPTSAS_ADD_INACTIVE_VOLUME:
2826 mptsas_adding_inactive_raid_components(ioc,
2827 ev->channel, ev->id);
2828 break;
2829 case MPTSAS_IGNORE_EVENT:
2830 default:
2831 break;
2832 }
2833
2834 mutex_unlock(&ioc->sas_discovery_mutex);
2835 kfree(ev);
2836 }
2837
2838 static void
2839 mptsas_send_sas_event(MPT_ADAPTER *ioc,
2840 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
2841 {
2842 struct mptsas_hotplug_event *ev;
2843 u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
2844 __le64 sas_address;
2845
2846 if ((device_info &
2847 (MPI_SAS_DEVICE_INFO_SSP_TARGET |
2848 MPI_SAS_DEVICE_INFO_STP_TARGET |
2849 MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
2850 return;
2851
2852 switch (sas_event_data->ReasonCode) {
2853 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
2854
2855 mptsas_target_reset_queue(ioc, sas_event_data);
2856 break;
2857
2858 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
2859 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
2860 if (!ev) {
2861 printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
2862 break;
2863 }
2864
2865 INIT_WORK(&ev->work, mptsas_hotplug_work);
2866 ev->ioc = ioc;
2867 ev->handle = le16_to_cpu(sas_event_data->DevHandle);
2868 ev->parent_handle =
2869 le16_to_cpu(sas_event_data->ParentDevHandle);
2870 ev->channel = sas_event_data->Bus;
2871 ev->id = sas_event_data->TargetID;
2872 ev->phy_id = sas_event_data->PhyNum;
2873 memcpy(&sas_address, &sas_event_data->SASAddress,
2874 sizeof(__le64));
2875 ev->sas_address = le64_to_cpu(sas_address);
2876 ev->device_info = device_info;
2877
2878 if (sas_event_data->ReasonCode &
2879 MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
2880 ev->event_type = MPTSAS_ADD_DEVICE;
2881 else
2882 ev->event_type = MPTSAS_DEL_DEVICE;
2883 schedule_work(&ev->work);
2884 break;
2885 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
2886 /*
2887 * Persistent table is full.
2888 */
2889 INIT_WORK(&ioc->sas_persist_task,
2890 mptsas_persist_clear_table);
2891 schedule_work(&ioc->sas_persist_task);
2892 break;
2893 /*
2894 * TODO, handle other events
2895 */
2896 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
2897 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
2898 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
2899 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
2900 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
2901 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
2902 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
2903 default:
2904 break;
2905 }
2906 }
2907 static void
2908 mptsas_send_raid_event(MPT_ADAPTER *ioc,
2909 EVENT_DATA_RAID *raid_event_data)
2910 {
2911 struct mptsas_hotplug_event *ev;
2912 int status = le32_to_cpu(raid_event_data->SettingsStatus);
2913 int state = (status >> 8) & 0xff;
2914
2915 if (ioc->bus_type != SAS)
2916 return;
2917
2918 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
2919 if (!ev) {
2920 printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
2921 return;
2922 }
2923
2924 INIT_WORK(&ev->work, mptsas_hotplug_work);
2925 ev->ioc = ioc;
2926 ev->id = raid_event_data->VolumeID;
2927 ev->channel = raid_event_data->VolumeBus;
2928 ev->event_type = MPTSAS_IGNORE_EVENT;
2929
2930 switch (raid_event_data->ReasonCode) {
2931 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
2932 ev->phys_disk_num_valid = 1;
2933 ev->phys_disk_num = raid_event_data->PhysDiskNum;
2934 ev->event_type = MPTSAS_ADD_DEVICE;
2935 break;
2936 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
2937 ev->phys_disk_num_valid = 1;
2938 ev->phys_disk_num = raid_event_data->PhysDiskNum;
2939 ev->hidden_raid_component = 1;
2940 ev->event_type = MPTSAS_DEL_DEVICE;
2941 break;
2942 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
2943 switch (state) {
2944 case MPI_PD_STATE_ONLINE:
2945 case MPI_PD_STATE_NOT_COMPATIBLE:
2946 ev->phys_disk_num_valid = 1;
2947 ev->phys_disk_num = raid_event_data->PhysDiskNum;
2948 ev->hidden_raid_component = 1;
2949 ev->event_type = MPTSAS_ADD_DEVICE;
2950 break;
2951 case MPI_PD_STATE_MISSING:
2952 case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
2953 case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
2954 case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
2955 ev->phys_disk_num_valid = 1;
2956 ev->phys_disk_num = raid_event_data->PhysDiskNum;
2957 ev->event_type = MPTSAS_DEL_DEVICE;
2958 break;
2959 default:
2960 break;
2961 }
2962 break;
2963 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
2964 ev->event_type = MPTSAS_DEL_RAID;
2965 break;
2966 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
2967 ev->event_type = MPTSAS_ADD_RAID;
2968 break;
2969 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
2970 switch (state) {
2971 case MPI_RAIDVOL0_STATUS_STATE_FAILED:
2972 case MPI_RAIDVOL0_STATUS_STATE_MISSING:
2973 ev->event_type = MPTSAS_DEL_RAID;
2974 break;
2975 case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
2976 case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
2977 ev->event_type = MPTSAS_ADD_RAID;
2978 break;
2979 default:
2980 break;
2981 }
2982 break;
2983 default:
2984 break;
2985 }
2986 schedule_work(&ev->work);
2987 }
2988
2989 static void
2990 mptsas_send_discovery_event(MPT_ADAPTER *ioc,
2991 EVENT_DATA_SAS_DISCOVERY *discovery_data)
2992 {
2993 struct mptsas_discovery_event *ev;
2994
2995 /*
2996 * DiscoveryStatus
2997 *
2998 * This flag will be non-zero when firmware
2999 * kicks off discovery, and return to zero
3000 * once its completed.
3001 */
3002 if (discovery_data->DiscoveryStatus)
3003 return;
3004
3005 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
3006 if (!ev)
3007 return;
3008 INIT_WORK(&ev->work, mptsas_discovery_work);
3009 ev->ioc = ioc;
3010 schedule_work(&ev->work);
3011 };
3012
3013 /*
3014 * mptsas_send_ir2_event - handle exposing hidden disk when
3015 * an inactive raid volume is added
3016 *
3017 * @ioc: Pointer to MPT_ADAPTER structure
3018 * @ir2_data
3019 *
3020 */
3021 static void
3022 mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
3023 {
3024 struct mptsas_hotplug_event *ev;
3025
3026 if (ir2_data->ReasonCode !=
3027 MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
3028 return;
3029
3030 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
3031 if (!ev)
3032 return;
3033
3034 INIT_WORK(&ev->work, mptsas_hotplug_work);
3035 ev->ioc = ioc;
3036 ev->id = ir2_data->TargetID;
3037 ev->channel = ir2_data->Bus;
3038 ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
3039
3040 schedule_work(&ev->work);
3041 };
3042
3043 static int
3044 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
3045 {
3046 int rc=1;
3047 u8 event = le32_to_cpu(reply->Event) & 0xFF;
3048
3049 if (!ioc->sh)
3050 goto out;
3051
3052 /*
3053 * sas_discovery_ignore_events
3054 *
3055 * This flag is to prevent anymore processing of
3056 * sas events once mptsas_remove function is called.
3057 */
3058 if (ioc->sas_discovery_ignore_events) {
3059 rc = mptscsih_event_process(ioc, reply);
3060 goto out;
3061 }
3062
3063 switch (event) {
3064 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
3065 mptsas_send_sas_event(ioc,
3066 (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
3067 break;
3068 case MPI_EVENT_INTEGRATED_RAID:
3069 mptsas_send_raid_event(ioc,
3070 (EVENT_DATA_RAID *)reply->Data);
3071 break;
3072 case MPI_EVENT_PERSISTENT_TABLE_FULL:
3073 INIT_WORK(&ioc->sas_persist_task,
3074 mptsas_persist_clear_table);
3075 schedule_work(&ioc->sas_persist_task);
3076 break;
3077 case MPI_EVENT_SAS_DISCOVERY:
3078 mptsas_send_discovery_event(ioc,
3079 (EVENT_DATA_SAS_DISCOVERY *)reply->Data);
3080 break;
3081 case MPI_EVENT_IR2:
3082 mptsas_send_ir2_event(ioc,
3083 (PTR_MPI_EVENT_DATA_IR2)reply->Data);
3084 break;
3085 default:
3086 rc = mptscsih_event_process(ioc, reply);
3087 break;
3088 }
3089 out:
3090
3091 return rc;
3092 }
3093
3094 static int
3095 mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
3096 {
3097 struct Scsi_Host *sh;
3098 MPT_SCSI_HOST *hd;
3099 MPT_ADAPTER *ioc;
3100 unsigned long flags;
3101 int ii;
3102 int numSGE = 0;
3103 int scale;
3104 int ioc_cap;
3105 int error=0;
3106 int r;
3107
3108 r = mpt_attach(pdev,id);
3109 if (r)
3110 return r;
3111
3112 ioc = pci_get_drvdata(pdev);
3113 ioc->DoneCtx = mptsasDoneCtx;
3114 ioc->TaskCtx = mptsasTaskCtx;
3115 ioc->InternalCtx = mptsasInternalCtx;
3116
3117 /* Added sanity check on readiness of the MPT adapter.
3118 */
3119 if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
3120 printk(MYIOC_s_WARN_FMT
3121 "Skipping because it's not operational!\n",
3122 ioc->name);
3123 error = -ENODEV;
3124 goto out_mptsas_probe;
3125 }
3126
3127 if (!ioc->active) {
3128 printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
3129 ioc->name);
3130 error = -ENODEV;
3131 goto out_mptsas_probe;
3132 }
3133
3134 /* Sanity check - ensure at least 1 port is INITIATOR capable
3135 */
3136 ioc_cap = 0;
3137 for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) {
3138 if (ioc->pfacts[ii].ProtocolFlags &
3139 MPI_PORTFACTS_PROTOCOL_INITIATOR)
3140 ioc_cap++;
3141 }
3142
3143 if (!ioc_cap) {
3144 printk(MYIOC_s_WARN_FMT
3145 "Skipping ioc=%p because SCSI Initiator mode "
3146 "is NOT enabled!\n", ioc->name, ioc);
3147 return 0;
3148 }
3149
3150 sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST));
3151 if (!sh) {
3152 printk(MYIOC_s_WARN_FMT
3153 "Unable to register controller with SCSI subsystem\n",
3154 ioc->name);
3155 error = -1;
3156 goto out_mptsas_probe;
3157 }
3158
3159 spin_lock_irqsave(&ioc->FreeQlock, flags);
3160
3161 /* Attach the SCSI Host to the IOC structure
3162 */
3163 ioc->sh = sh;
3164
3165 sh->io_port = 0;
3166 sh->n_io_port = 0;
3167 sh->irq = 0;
3168
3169 /* set 16 byte cdb's */
3170 sh->max_cmd_len = 16;
3171
3172 sh->max_id = ioc->pfacts[0].PortSCSIID;
3173 sh->max_lun = max_lun;
3174
3175 sh->transportt = mptsas_transport_template;
3176
3177 sh->this_id = ioc->pfacts[0].PortSCSIID;
3178
3179 /* Required entry.
3180 */
3181 sh->unique_id = ioc->id;
3182
3183 INIT_LIST_HEAD(&ioc->sas_topology);
3184 mutex_init(&ioc->sas_topology_mutex);
3185 mutex_init(&ioc->sas_discovery_mutex);
3186 mutex_init(&ioc->sas_mgmt.mutex);
3187 init_completion(&ioc->sas_mgmt.done);
3188
3189 /* Verify that we won't exceed the maximum
3190 * number of chain buffers
3191 * We can optimize: ZZ = req_sz/sizeof(SGE)
3192 * For 32bit SGE's:
3193 * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
3194 * + (req_sz - 64)/sizeof(SGE)
3195 * A slightly different algorithm is required for
3196 * 64bit SGEs.
3197 */
3198 scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
3199 if (sizeof(dma_addr_t) == sizeof(u64)) {
3200 numSGE = (scale - 1) *
3201 (ioc->facts.MaxChainDepth-1) + scale +
3202 (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
3203 sizeof(u32));
3204 } else {
3205 numSGE = 1 + (scale - 1) *
3206 (ioc->facts.MaxChainDepth-1) + scale +
3207 (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
3208 sizeof(u32));
3209 }
3210
3211 if (numSGE < sh->sg_tablesize) {
3212 /* Reset this value */
3213 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3214 "Resetting sg_tablesize to %d from %d\n",
3215 ioc->name, numSGE, sh->sg_tablesize));
3216 sh->sg_tablesize = numSGE;
3217 }
3218
3219 hd = shost_priv(sh);
3220 hd->ioc = ioc;
3221
3222 /* SCSI needs scsi_cmnd lookup table!
3223 * (with size equal to req_depth*PtrSz!)
3224 */
3225 ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC);
3226 if (!ioc->ScsiLookup) {
3227 error = -ENOMEM;
3228 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
3229 goto out_mptsas_probe;
3230 }
3231 spin_lock_init(&ioc->scsi_lookup_lock);
3232
3233 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
3234 ioc->name, ioc->ScsiLookup));
3235
3236 /* Clear the TM flags
3237 */
3238 hd->tmPending = 0;
3239 hd->tmState = TM_STATE_NONE;
3240 hd->resetPending = 0;
3241 hd->abortSCpnt = NULL;
3242
3243 /* Clear the pointer used to store
3244 * single-threaded commands, i.e., those
3245 * issued during a bus scan, dv and
3246 * configuration pages.
3247 */
3248 hd->cmdPtr = NULL;
3249
3250 /* Initialize this SCSI Hosts' timers
3251 * To use, set the timer expires field
3252 * and add_timer
3253 */
3254 init_timer(&hd->timer);
3255 hd->timer.data = (unsigned long) hd;
3256 hd->timer.function = mptscsih_timer_expired;
3257
3258 ioc->sas_data.ptClear = mpt_pt_clear;
3259
3260 init_waitqueue_head(&hd->scandv_waitq);
3261 hd->scandv_wait_done = 0;
3262 hd->last_queue_full = 0;
3263 INIT_LIST_HEAD(&hd->target_reset_list);
3264 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
3265
3266 if (ioc->sas_data.ptClear==1) {
3267 mptbase_sas_persist_operation(
3268 ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT);
3269 }
3270
3271 error = scsi_add_host(sh, &ioc->pcidev->dev);
3272 if (error) {
3273 dprintk(ioc, printk(MYIOC_s_ERR_FMT
3274 "scsi_add_host failed\n", ioc->name));
3275 goto out_mptsas_probe;
3276 }
3277
3278 mptsas_scan_sas_topology(ioc);
3279
3280 return 0;
3281
3282 out_mptsas_probe:
3283
3284 mptscsih_remove(pdev);
3285 return error;
3286 }
3287
3288 static void __devexit mptsas_remove(struct pci_dev *pdev)
3289 {
3290 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
3291 struct mptsas_portinfo *p, *n;
3292 int i;
3293
3294 ioc->sas_discovery_ignore_events = 1;
3295 sas_remove_host(ioc->sh);
3296
3297 mutex_lock(&ioc->sas_topology_mutex);
3298 list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
3299 list_del(&p->list);
3300 for (i = 0 ; i < p->num_phys ; i++)
3301 mptsas_port_delete(ioc, p->phy_info[i].port_details);
3302 kfree(p->phy_info);
3303 kfree(p);
3304 }
3305 mutex_unlock(&ioc->sas_topology_mutex);
3306
3307 mptscsih_remove(pdev);
3308 }
3309
3310 static struct pci_device_id mptsas_pci_table[] = {
3311 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064,
3312 PCI_ANY_ID, PCI_ANY_ID },
3313 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068,
3314 PCI_ANY_ID, PCI_ANY_ID },
3315 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064E,
3316 PCI_ANY_ID, PCI_ANY_ID },
3317 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068E,
3318 PCI_ANY_ID, PCI_ANY_ID },
3319 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078,
3320 PCI_ANY_ID, PCI_ANY_ID },
3321 {0} /* Terminating entry */
3322 };
3323 MODULE_DEVICE_TABLE(pci, mptsas_pci_table);
3324
3325
3326 static struct pci_driver mptsas_driver = {
3327 .name = "mptsas",
3328 .id_table = mptsas_pci_table,
3329 .probe = mptsas_probe,
3330 .remove = __devexit_p(mptsas_remove),
3331 .shutdown = mptscsih_shutdown,
3332 #ifdef CONFIG_PM
3333 .suspend = mptscsih_suspend,
3334 .resume = mptscsih_resume,
3335 #endif
3336 };
3337
3338 static int __init
3339 mptsas_init(void)
3340 {
3341 int error;
3342
3343 show_mptmod_ver(my_NAME, my_VERSION);
3344
3345 mptsas_transport_template =
3346 sas_attach_transport(&mptsas_transport_functions);
3347 if (!mptsas_transport_template)
3348 return -ENODEV;
3349
3350 mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
3351 mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
3352 mptsasInternalCtx =
3353 mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
3354 mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
3355
3356 mpt_event_register(mptsasDoneCtx, mptsas_event_process);
3357 mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset);
3358
3359 error = pci_register_driver(&mptsas_driver);
3360 if (error)
3361 sas_release_transport(mptsas_transport_template);
3362
3363 return error;
3364 }
3365
3366 static void __exit
3367 mptsas_exit(void)
3368 {
3369 pci_unregister_driver(&mptsas_driver);
3370 sas_release_transport(mptsas_transport_template);
3371
3372 mpt_reset_deregister(mptsasDoneCtx);
3373 mpt_event_deregister(mptsasDoneCtx);
3374
3375 mpt_deregister(mptsasMgmtCtx);
3376 mpt_deregister(mptsasInternalCtx);
3377 mpt_deregister(mptsasTaskCtx);
3378 mpt_deregister(mptsasDoneCtx);
3379 }
3380
3381 module_init(mptsas_init);
3382 module_exit(mptsas_exit);
A Kernel for the Dreambox dm7025.