1 /*************************************************************************
2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
4 * Copyright (C) 2005 - 2007 Myricom, Inc.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
32 * If the eeprom on your board is not recent enough, you will need to get a
33 * newer firmware image at:
34 * http://www.myri.com/scs/download-Myri10GE.html
36 * Contact Information:
38 * Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
39 *************************************************************************/
41 #include <linux/tcp.h>
42 #include <linux/netdevice.h>
43 #include <linux/skbuff.h>
44 #include <linux/string.h>
45 #include <linux/module.h>
46 #include <linux/pci.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/etherdevice.h>
49 #include <linux/if_ether.h>
50 #include <linux/if_vlan.h>
51 #include <linux/inet_lro.h>
53 #include <linux/inet.h>
55 #include <linux/ethtool.h>
56 #include <linux/firmware.h>
57 #include <linux/delay.h>
58 #include <linux/version.h>
59 #include <linux/timer.h>
60 #include <linux/vmalloc.h>
61 #include <linux/crc32.h>
62 #include <linux/moduleparam.h>
64 #include <linux/log2.h>
65 #include <net/checksum.h>
68 #include <asm/byteorder.h>
70 #include <asm/processor.h>
75 #include "myri10ge_mcp.h"
76 #include "myri10ge_mcp_gen_header.h"
78 #define MYRI10GE_VERSION_STR "1.3.2-1.287"
80 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
81 MODULE_AUTHOR("Maintainer: help@myri.com");
82 MODULE_VERSION(MYRI10GE_VERSION_STR
);
83 MODULE_LICENSE("Dual BSD/GPL");
85 #define MYRI10GE_MAX_ETHER_MTU 9014
87 #define MYRI10GE_ETH_STOPPED 0
88 #define MYRI10GE_ETH_STOPPING 1
89 #define MYRI10GE_ETH_STARTING 2
90 #define MYRI10GE_ETH_RUNNING 3
91 #define MYRI10GE_ETH_OPEN_FAILED 4
93 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
94 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
95 #define MYRI10GE_MAX_LRO_DESCRIPTORS 8
96 #define MYRI10GE_LRO_MAX_PKTS 64
98 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
99 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
101 #define MYRI10GE_ALLOC_ORDER 0
102 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
103 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
105 struct myri10ge_rx_buffer_state
{
108 DECLARE_PCI_UNMAP_ADDR(bus
)
109 DECLARE_PCI_UNMAP_LEN(len
)
112 struct myri10ge_tx_buffer_state
{
115 DECLARE_PCI_UNMAP_ADDR(bus
)
116 DECLARE_PCI_UNMAP_LEN(len
)
119 struct myri10ge_cmd
{
125 struct myri10ge_rx_buf
{
126 struct mcp_kreq_ether_recv __iomem
*lanai
; /* lanai ptr for recv ring */
127 u8 __iomem
*wc_fifo
; /* w/c rx dma addr fifo address */
128 struct mcp_kreq_ether_recv
*shadow
; /* host shadow of recv ring */
129 struct myri10ge_rx_buffer_state
*info
;
136 int mask
; /* number of rx slots -1 */
140 struct myri10ge_tx_buf
{
141 struct mcp_kreq_ether_send __iomem
*lanai
; /* lanai ptr for sendq */
142 u8 __iomem
*wc_fifo
; /* w/c send fifo address */
143 struct mcp_kreq_ether_send
*req_list
; /* host shadow of sendq */
145 struct myri10ge_tx_buffer_state
*info
;
146 int mask
; /* number of transmit slots -1 */
147 int boundary
; /* boundary transmits cannot cross */
148 int req ____cacheline_aligned
; /* transmit slots submitted */
149 int pkt_start
; /* packets started */
150 int done ____cacheline_aligned
; /* transmit slots completed */
151 int pkt_done
; /* packets completed */
154 struct myri10ge_rx_done
{
155 struct mcp_slot
*entry
;
159 struct net_lro_mgr lro_mgr
;
160 struct net_lro_desc lro_desc
[MYRI10GE_MAX_LRO_DESCRIPTORS
];
163 struct myri10ge_priv
{
164 int running
; /* running? */
165 int csum_flag
; /* rx_csums? */
166 struct myri10ge_tx_buf tx
; /* transmit ring */
167 struct myri10ge_rx_buf rx_small
;
168 struct myri10ge_rx_buf rx_big
;
169 struct myri10ge_rx_done rx_done
;
172 struct net_device
*dev
;
173 struct napi_struct napi
;
174 struct net_device_stats stats
;
177 unsigned long board_span
;
178 unsigned long iomem_base
;
179 __be32 __iomem
*irq_claim
;
180 __be32 __iomem
*irq_deassert
;
181 char *mac_addr_string
;
182 struct mcp_cmd_response
*cmd
;
184 struct mcp_irq_data
*fw_stats
;
185 dma_addr_t fw_stats_bus
;
186 struct pci_dev
*pdev
;
189 unsigned int rdma_tags_available
;
191 __be32 __iomem
*intr_coal_delay_ptr
;
197 wait_queue_head_t down_wq
;
198 struct work_struct watchdog_work
;
199 struct timer_list watchdog_timer
;
200 int watchdog_tx_done
;
207 char eeprom_strings
[MYRI10GE_EEPROM_STRINGS_SIZE
];
208 char fw_version
[128];
212 int adopted_rx_filter_bug
;
213 u8 mac_addr
[6]; /* eeprom mac address */
214 unsigned long serial_number
;
215 int vendor_specific_offset
;
216 int fw_multicast_support
;
217 unsigned long features
;
226 static char *myri10ge_fw_unaligned
= "myri10ge_ethp_z8e.dat";
227 static char *myri10ge_fw_aligned
= "myri10ge_eth_z8e.dat";
229 static char *myri10ge_fw_name
= NULL
;
230 module_param(myri10ge_fw_name
, charp
, S_IRUGO
| S_IWUSR
);
231 MODULE_PARM_DESC(myri10ge_fw_name
, "Firmware image name\n");
233 static int myri10ge_ecrc_enable
= 1;
234 module_param(myri10ge_ecrc_enable
, int, S_IRUGO
);
235 MODULE_PARM_DESC(myri10ge_ecrc_enable
, "Enable Extended CRC on PCI-E\n");
237 static int myri10ge_max_intr_slots
= 1024;
238 module_param(myri10ge_max_intr_slots
, int, S_IRUGO
);
239 MODULE_PARM_DESC(myri10ge_max_intr_slots
, "Interrupt queue slots\n");
241 static int myri10ge_small_bytes
= -1; /* -1 == auto */
242 module_param(myri10ge_small_bytes
, int, S_IRUGO
| S_IWUSR
);
243 MODULE_PARM_DESC(myri10ge_small_bytes
, "Threshold of small packets\n");
245 static int myri10ge_msi
= 1; /* enable msi by default */
246 module_param(myri10ge_msi
, int, S_IRUGO
| S_IWUSR
);
247 MODULE_PARM_DESC(myri10ge_msi
, "Enable Message Signalled Interrupts\n");
249 static int myri10ge_intr_coal_delay
= 75;
250 module_param(myri10ge_intr_coal_delay
, int, S_IRUGO
);
251 MODULE_PARM_DESC(myri10ge_intr_coal_delay
, "Interrupt coalescing delay\n");
253 static int myri10ge_flow_control
= 1;
254 module_param(myri10ge_flow_control
, int, S_IRUGO
);
255 MODULE_PARM_DESC(myri10ge_flow_control
, "Pause parameter\n");
257 static int myri10ge_deassert_wait
= 1;
258 module_param(myri10ge_deassert_wait
, int, S_IRUGO
| S_IWUSR
);
259 MODULE_PARM_DESC(myri10ge_deassert_wait
,
260 "Wait when deasserting legacy interrupts\n");
262 static int myri10ge_force_firmware
= 0;
263 module_param(myri10ge_force_firmware
, int, S_IRUGO
);
264 MODULE_PARM_DESC(myri10ge_force_firmware
,
265 "Force firmware to assume aligned completions\n");
267 static int myri10ge_initial_mtu
= MYRI10GE_MAX_ETHER_MTU
- ETH_HLEN
;
268 module_param(myri10ge_initial_mtu
, int, S_IRUGO
);
269 MODULE_PARM_DESC(myri10ge_initial_mtu
, "Initial MTU\n");
271 static int myri10ge_napi_weight
= 64;
272 module_param(myri10ge_napi_weight
, int, S_IRUGO
);
273 MODULE_PARM_DESC(myri10ge_napi_weight
, "Set NAPI weight\n");
275 static int myri10ge_watchdog_timeout
= 1;
276 module_param(myri10ge_watchdog_timeout
, int, S_IRUGO
);
277 MODULE_PARM_DESC(myri10ge_watchdog_timeout
, "Set watchdog timeout\n");
279 static int myri10ge_max_irq_loops
= 1048576;
280 module_param(myri10ge_max_irq_loops
, int, S_IRUGO
);
281 MODULE_PARM_DESC(myri10ge_max_irq_loops
,
282 "Set stuck legacy IRQ detection threshold\n");
284 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
286 static int myri10ge_debug
= -1; /* defaults above */
287 module_param(myri10ge_debug
, int, 0);
288 MODULE_PARM_DESC(myri10ge_debug
, "Debug level (0=none,...,16=all)");
290 static int myri10ge_lro
= 1;
291 module_param(myri10ge_lro
, int, S_IRUGO
);
292 MODULE_PARM_DESC(myri10ge_lro
, "Enable large receive offload\n");
294 static int myri10ge_lro_max_pkts
= MYRI10GE_LRO_MAX_PKTS
;
295 module_param(myri10ge_lro_max_pkts
, int, S_IRUGO
);
296 MODULE_PARM_DESC(myri10ge_lro
, "Number of LRO packets to be aggregated\n");
298 static int myri10ge_fill_thresh
= 256;
299 module_param(myri10ge_fill_thresh
, int, S_IRUGO
| S_IWUSR
);
300 MODULE_PARM_DESC(myri10ge_fill_thresh
, "Number of empty rx slots allowed\n");
302 static int myri10ge_reset_recover
= 1;
304 static int myri10ge_wcfifo
= 0;
305 module_param(myri10ge_wcfifo
, int, S_IRUGO
);
306 MODULE_PARM_DESC(myri10ge_wcfifo
, "Enable WC Fifo when WC is enabled\n");
308 #define MYRI10GE_FW_OFFSET 1024*1024
309 #define MYRI10GE_HIGHPART_TO_U32(X) \
310 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
311 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
313 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
315 static void myri10ge_set_multicast_list(struct net_device
*dev
);
316 static int myri10ge_sw_tso(struct sk_buff
*skb
, struct net_device
*dev
);
318 static inline void put_be32(__be32 val
, __be32 __iomem
* p
)
320 __raw_writel((__force __u32
) val
, (__force
void __iomem
*)p
);
324 myri10ge_send_cmd(struct myri10ge_priv
*mgp
, u32 cmd
,
325 struct myri10ge_cmd
*data
, int atomic
)
328 char buf_bytes
[sizeof(*buf
) + 8];
329 struct mcp_cmd_response
*response
= mgp
->cmd
;
330 char __iomem
*cmd_addr
= mgp
->sram
+ MXGEFW_ETH_CMD
;
331 u32 dma_low
, dma_high
, result
, value
;
334 /* ensure buf is aligned to 8 bytes */
335 buf
= (struct mcp_cmd
*)ALIGN((unsigned long)buf_bytes
, 8);
337 buf
->data0
= htonl(data
->data0
);
338 buf
->data1
= htonl(data
->data1
);
339 buf
->data2
= htonl(data
->data2
);
340 buf
->cmd
= htonl(cmd
);
341 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
342 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
344 buf
->response_addr
.low
= htonl(dma_low
);
345 buf
->response_addr
.high
= htonl(dma_high
);
346 response
->result
= htonl(MYRI10GE_NO_RESPONSE_RESULT
);
348 myri10ge_pio_copy(cmd_addr
, buf
, sizeof(*buf
));
350 /* wait up to 15ms. Longest command is the DMA benchmark,
351 * which is capped at 5ms, but runs from a timeout handler
352 * that runs every 7.8ms. So a 15ms timeout leaves us with
356 /* if atomic is set, do not sleep,
357 * and try to get the completion quickly
358 * (1ms will be enough for those commands) */
359 for (sleep_total
= 0;
361 && response
->result
== htonl(MYRI10GE_NO_RESPONSE_RESULT
);
365 /* use msleep for most command */
366 for (sleep_total
= 0;
368 && response
->result
== htonl(MYRI10GE_NO_RESPONSE_RESULT
);
373 result
= ntohl(response
->result
);
374 value
= ntohl(response
->data
);
375 if (result
!= MYRI10GE_NO_RESPONSE_RESULT
) {
379 } else if (result
== MXGEFW_CMD_UNKNOWN
) {
381 } else if (result
== MXGEFW_CMD_ERROR_UNALIGNED
) {
384 dev_err(&mgp
->pdev
->dev
,
385 "command %d failed, result = %d\n",
391 dev_err(&mgp
->pdev
->dev
, "command %d timed out, result = %d\n",
397 * The eeprom strings on the lanaiX have the format
400 * PT:ddd mmm xx xx:xx:xx xx\0
401 * PV:ddd mmm xx xx:xx:xx xx\0
403 static int myri10ge_read_mac_addr(struct myri10ge_priv
*mgp
)
408 ptr
= mgp
->eeprom_strings
;
409 limit
= mgp
->eeprom_strings
+ MYRI10GE_EEPROM_STRINGS_SIZE
;
411 while (*ptr
!= '\0' && ptr
< limit
) {
412 if (memcmp(ptr
, "MAC=", 4) == 0) {
414 mgp
->mac_addr_string
= ptr
;
415 for (i
= 0; i
< 6; i
++) {
416 if ((ptr
+ 2) > limit
)
419 simple_strtoul(ptr
, &ptr
, 16);
423 if (memcmp((const void *)ptr
, "SN=", 3) == 0) {
425 mgp
->serial_number
= simple_strtoul(ptr
, &ptr
, 10);
427 while (ptr
< limit
&& *ptr
++) ;
433 dev_err(&mgp
->pdev
->dev
, "failed to parse eeprom_strings\n");
438 * Enable or disable periodic RDMAs from the host to make certain
439 * chipsets resend dropped PCIe messages
442 static void myri10ge_dummy_rdma(struct myri10ge_priv
*mgp
, int enable
)
444 char __iomem
*submit
;
446 u32 dma_low
, dma_high
;
449 /* clear confirmation addr */
453 /* send a rdma command to the PCIe engine, and wait for the
454 * response in the confirmation address. The firmware should
455 * write a -1 there to indicate it is alive and well
457 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
458 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
460 buf
[0] = htonl(dma_high
); /* confirm addr MSW */
461 buf
[1] = htonl(dma_low
); /* confirm addr LSW */
462 buf
[2] = MYRI10GE_NO_CONFIRM_DATA
; /* confirm data */
463 buf
[3] = htonl(dma_high
); /* dummy addr MSW */
464 buf
[4] = htonl(dma_low
); /* dummy addr LSW */
465 buf
[5] = htonl(enable
); /* enable? */
467 submit
= mgp
->sram
+ MXGEFW_BOOT_DUMMY_RDMA
;
469 myri10ge_pio_copy(submit
, &buf
, sizeof(buf
));
470 for (i
= 0; mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
&& i
< 20; i
++)
472 if (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
)
473 dev_err(&mgp
->pdev
->dev
, "dummy rdma %s failed\n",
474 (enable
? "enable" : "disable"));
478 myri10ge_validate_firmware(struct myri10ge_priv
*mgp
,
479 struct mcp_gen_header
*hdr
)
481 struct device
*dev
= &mgp
->pdev
->dev
;
483 /* check firmware type */
484 if (ntohl(hdr
->mcp_type
) != MCP_TYPE_ETH
) {
485 dev_err(dev
, "Bad firmware type: 0x%x\n", ntohl(hdr
->mcp_type
));
489 /* save firmware version for ethtool */
490 strncpy(mgp
->fw_version
, hdr
->version
, sizeof(mgp
->fw_version
));
492 sscanf(mgp
->fw_version
, "%d.%d.%d", &mgp
->fw_ver_major
,
493 &mgp
->fw_ver_minor
, &mgp
->fw_ver_tiny
);
495 if (!(mgp
->fw_ver_major
== MXGEFW_VERSION_MAJOR
496 && mgp
->fw_ver_minor
== MXGEFW_VERSION_MINOR
)) {
497 dev_err(dev
, "Found firmware version %s\n", mgp
->fw_version
);
498 dev_err(dev
, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR
,
499 MXGEFW_VERSION_MINOR
);
505 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv
*mgp
, u32
* size
)
507 unsigned crc
, reread_crc
;
508 const struct firmware
*fw
;
509 struct device
*dev
= &mgp
->pdev
->dev
;
510 struct mcp_gen_header
*hdr
;
515 if ((status
= request_firmware(&fw
, mgp
->fw_name
, dev
)) < 0) {
516 dev_err(dev
, "Unable to load %s firmware image via hotplug\n",
519 goto abort_with_nothing
;
524 if (fw
->size
>= mgp
->sram_size
- MYRI10GE_FW_OFFSET
||
525 fw
->size
< MCP_HEADER_PTR_OFFSET
+ 4) {
526 dev_err(dev
, "Firmware size invalid:%d\n", (int)fw
->size
);
532 hdr_offset
= ntohl(*(__be32
*) (fw
->data
+ MCP_HEADER_PTR_OFFSET
));
533 if ((hdr_offset
& 3) || hdr_offset
+ sizeof(*hdr
) > fw
->size
) {
534 dev_err(dev
, "Bad firmware file\n");
538 hdr
= (void *)(fw
->data
+ hdr_offset
);
540 status
= myri10ge_validate_firmware(mgp
, hdr
);
544 crc
= crc32(~0, fw
->data
, fw
->size
);
545 for (i
= 0; i
< fw
->size
; i
+= 256) {
546 myri10ge_pio_copy(mgp
->sram
+ MYRI10GE_FW_OFFSET
+ i
,
548 min(256U, (unsigned)(fw
->size
- i
)));
552 /* corruption checking is good for parity recovery and buggy chipset */
553 memcpy_fromio(fw
->data
, mgp
->sram
+ MYRI10GE_FW_OFFSET
, fw
->size
);
554 reread_crc
= crc32(~0, fw
->data
, fw
->size
);
555 if (crc
!= reread_crc
) {
556 dev_err(dev
, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
557 (unsigned)fw
->size
, reread_crc
, crc
);
561 *size
= (u32
) fw
->size
;
564 release_firmware(fw
);
570 static int myri10ge_adopt_running_firmware(struct myri10ge_priv
*mgp
)
572 struct mcp_gen_header
*hdr
;
573 struct device
*dev
= &mgp
->pdev
->dev
;
574 const size_t bytes
= sizeof(struct mcp_gen_header
);
578 /* find running firmware header */
579 hdr_offset
= swab32(readl(mgp
->sram
+ MCP_HEADER_PTR_OFFSET
));
581 if ((hdr_offset
& 3) || hdr_offset
+ sizeof(*hdr
) > mgp
->sram_size
) {
582 dev_err(dev
, "Running firmware has bad header offset (%d)\n",
587 /* copy header of running firmware from SRAM to host memory to
588 * validate firmware */
589 hdr
= kmalloc(bytes
, GFP_KERNEL
);
591 dev_err(dev
, "could not malloc firmware hdr\n");
594 memcpy_fromio(hdr
, mgp
->sram
+ hdr_offset
, bytes
);
595 status
= myri10ge_validate_firmware(mgp
, hdr
);
598 /* check to see if adopted firmware has bug where adopting
599 * it will cause broadcasts to be filtered unless the NIC
600 * is kept in ALLMULTI mode */
601 if (mgp
->fw_ver_major
== 1 && mgp
->fw_ver_minor
== 4 &&
602 mgp
->fw_ver_tiny
>= 4 && mgp
->fw_ver_tiny
<= 11) {
603 mgp
->adopted_rx_filter_bug
= 1;
604 dev_warn(dev
, "Adopting fw %d.%d.%d: "
605 "working around rx filter bug\n",
606 mgp
->fw_ver_major
, mgp
->fw_ver_minor
,
612 static int myri10ge_load_firmware(struct myri10ge_priv
*mgp
)
614 char __iomem
*submit
;
616 u32 dma_low
, dma_high
, size
;
618 struct myri10ge_cmd cmd
;
621 status
= myri10ge_load_hotplug_firmware(mgp
, &size
);
623 dev_warn(&mgp
->pdev
->dev
, "hotplug firmware loading failed\n");
625 /* Do not attempt to adopt firmware if there
630 status
= myri10ge_adopt_running_firmware(mgp
);
632 dev_err(&mgp
->pdev
->dev
,
633 "failed to adopt running firmware\n");
636 dev_info(&mgp
->pdev
->dev
,
637 "Successfully adopted running firmware\n");
638 if (mgp
->tx
.boundary
== 4096) {
639 dev_warn(&mgp
->pdev
->dev
,
640 "Using firmware currently running on NIC"
642 dev_warn(&mgp
->pdev
->dev
,
643 "performance consider loading optimized "
645 dev_warn(&mgp
->pdev
->dev
, "via hotplug\n");
648 mgp
->fw_name
= "adopted";
649 mgp
->tx
.boundary
= 2048;
653 /* clear confirmation addr */
657 /* send a reload command to the bootstrap MCP, and wait for the
658 * response in the confirmation address. The firmware should
659 * write a -1 there to indicate it is alive and well
661 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
662 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
664 buf
[0] = htonl(dma_high
); /* confirm addr MSW */
665 buf
[1] = htonl(dma_low
); /* confirm addr LSW */
666 buf
[2] = MYRI10GE_NO_CONFIRM_DATA
; /* confirm data */
668 /* FIX: All newest firmware should un-protect the bottom of
669 * the sram before handoff. However, the very first interfaces
670 * do not. Therefore the handoff copy must skip the first 8 bytes
672 buf
[3] = htonl(MYRI10GE_FW_OFFSET
+ 8); /* where the code starts */
673 buf
[4] = htonl(size
- 8); /* length of code */
674 buf
[5] = htonl(8); /* where to copy to */
675 buf
[6] = htonl(0); /* where to jump to */
677 submit
= mgp
->sram
+ MXGEFW_BOOT_HANDOFF
;
679 myri10ge_pio_copy(submit
, &buf
, sizeof(buf
));
684 while (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
&& i
< 20) {
688 if (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
) {
689 dev_err(&mgp
->pdev
->dev
, "handoff failed\n");
692 dev_info(&mgp
->pdev
->dev
, "handoff confirmed\n");
693 myri10ge_dummy_rdma(mgp
, 1);
695 /* probe for IPv6 TSO support */
696 mgp
->features
= NETIF_F_SG
| NETIF_F_HW_CSUM
| NETIF_F_TSO
;
697 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE
,
700 mgp
->max_tso6
= cmd
.data0
;
701 mgp
->features
|= NETIF_F_TSO6
;
706 static int myri10ge_update_mac_address(struct myri10ge_priv
*mgp
, u8
* addr
)
708 struct myri10ge_cmd cmd
;
711 cmd
.data0
= ((addr
[0] << 24) | (addr
[1] << 16)
712 | (addr
[2] << 8) | addr
[3]);
714 cmd
.data1
= ((addr
[4] << 8) | (addr
[5]));
716 status
= myri10ge_send_cmd(mgp
, MXGEFW_SET_MAC_ADDRESS
, &cmd
, 0);
720 static int myri10ge_change_pause(struct myri10ge_priv
*mgp
, int pause
)
722 struct myri10ge_cmd cmd
;
725 ctl
= pause
? MXGEFW_ENABLE_FLOW_CONTROL
: MXGEFW_DISABLE_FLOW_CONTROL
;
726 status
= myri10ge_send_cmd(mgp
, ctl
, &cmd
, 0);
730 "myri10ge: %s: Failed to set flow control mode\n",
739 myri10ge_change_promisc(struct myri10ge_priv
*mgp
, int promisc
, int atomic
)
741 struct myri10ge_cmd cmd
;
744 ctl
= promisc
? MXGEFW_ENABLE_PROMISC
: MXGEFW_DISABLE_PROMISC
;
745 status
= myri10ge_send_cmd(mgp
, ctl
, &cmd
, atomic
);
747 printk(KERN_ERR
"myri10ge: %s: Failed to set promisc mode\n",
751 static int myri10ge_dma_test(struct myri10ge_priv
*mgp
, int test_type
)
753 struct myri10ge_cmd cmd
;
756 struct page
*dmatest_page
;
757 dma_addr_t dmatest_bus
;
760 dmatest_page
= alloc_page(GFP_KERNEL
);
763 dmatest_bus
= pci_map_page(mgp
->pdev
, dmatest_page
, 0, PAGE_SIZE
,
766 /* Run a small DMA test.
767 * The magic multipliers to the length tell the firmware
768 * to do DMA read, write, or read+write tests. The
769 * results are returned in cmd.data0. The upper 16
770 * bits or the return is the number of transfers completed.
771 * The lower 16 bits is the time in 0.5us ticks that the
772 * transfers took to complete.
775 len
= mgp
->tx
.boundary
;
777 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
778 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
779 cmd
.data2
= len
* 0x10000;
780 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
785 mgp
->read_dma
= ((cmd
.data0
>> 16) * len
* 2) / (cmd
.data0
& 0xffff);
786 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
787 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
788 cmd
.data2
= len
* 0x1;
789 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
794 mgp
->write_dma
= ((cmd
.data0
>> 16) * len
* 2) / (cmd
.data0
& 0xffff);
796 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
797 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
798 cmd
.data2
= len
* 0x10001;
799 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
804 mgp
->read_write_dma
= ((cmd
.data0
>> 16) * len
* 2 * 2) /
805 (cmd
.data0
& 0xffff);
808 pci_unmap_page(mgp
->pdev
, dmatest_bus
, PAGE_SIZE
, DMA_BIDIRECTIONAL
);
809 put_page(dmatest_page
);
811 if (status
!= 0 && test_type
!= MXGEFW_CMD_UNALIGNED_TEST
)
812 dev_warn(&mgp
->pdev
->dev
, "DMA %s benchmark failed: %d\n",
818 static int myri10ge_reset(struct myri10ge_priv
*mgp
)
820 struct myri10ge_cmd cmd
;
824 /* try to send a reset command to the card to see if it
826 memset(&cmd
, 0, sizeof(cmd
));
827 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_RESET
, &cmd
, 0);
829 dev_err(&mgp
->pdev
->dev
, "failed reset\n");
833 (void)myri10ge_dma_test(mgp
, MXGEFW_DMA_TEST
);
835 /* Now exchange information about interrupts */
837 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
838 memset(mgp
->rx_done
.entry
, 0, bytes
);
839 cmd
.data0
= (u32
) bytes
;
840 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_SIZE
, &cmd
, 0);
841 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(mgp
->rx_done
.bus
);
842 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(mgp
->rx_done
.bus
);
843 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_DMA
, &cmd
, 0);
846 myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_IRQ_ACK_OFFSET
, &cmd
, 0);
847 mgp
->irq_claim
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
848 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET
,
850 mgp
->irq_deassert
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
852 status
|= myri10ge_send_cmd
853 (mgp
, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET
, &cmd
, 0);
854 mgp
->intr_coal_delay_ptr
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
856 dev_err(&mgp
->pdev
->dev
, "failed set interrupt parameters\n");
859 put_be32(htonl(mgp
->intr_coal_delay
), mgp
->intr_coal_delay_ptr
);
861 memset(mgp
->rx_done
.entry
, 0, bytes
);
863 /* reset mcp/driver shared state back to 0 */
866 mgp
->tx
.pkt_start
= 0;
867 mgp
->tx
.pkt_done
= 0;
869 mgp
->rx_small
.cnt
= 0;
870 mgp
->rx_done
.idx
= 0;
871 mgp
->rx_done
.cnt
= 0;
872 mgp
->link_changes
= 0;
873 status
= myri10ge_update_mac_address(mgp
, mgp
->dev
->dev_addr
);
874 myri10ge_change_pause(mgp
, mgp
->pause
);
875 myri10ge_set_multicast_list(mgp
->dev
);
880 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem
* dst
,
881 struct mcp_kreq_ether_recv
*src
)
886 src
->addr_low
= htonl(DMA_32BIT_MASK
);
887 myri10ge_pio_copy(dst
, src
, 4 * sizeof(*src
));
889 myri10ge_pio_copy(dst
+ 4, src
+ 4, 4 * sizeof(*src
));
892 put_be32(low
, &dst
->addr_low
);
896 static inline void myri10ge_vlan_ip_csum(struct sk_buff
*skb
, __wsum hw_csum
)
898 struct vlan_hdr
*vh
= (struct vlan_hdr
*)(skb
->data
);
900 if ((skb
->protocol
== htons(ETH_P_8021Q
)) &&
901 (vh
->h_vlan_encapsulated_proto
== htons(ETH_P_IP
) ||
902 vh
->h_vlan_encapsulated_proto
== htons(ETH_P_IPV6
))) {
904 skb
->ip_summed
= CHECKSUM_COMPLETE
;
909 myri10ge_rx_skb_build(struct sk_buff
*skb
, u8
* va
,
910 struct skb_frag_struct
*rx_frags
, int len
, int hlen
)
912 struct skb_frag_struct
*skb_frags
;
914 skb
->len
= skb
->data_len
= len
;
915 skb
->truesize
= len
+ sizeof(struct sk_buff
);
916 /* attach the page(s) */
918 skb_frags
= skb_shinfo(skb
)->frags
;
920 memcpy(skb_frags
, rx_frags
, sizeof(*skb_frags
));
921 len
-= rx_frags
->size
;
924 skb_shinfo(skb
)->nr_frags
++;
927 /* pskb_may_pull is not available in irq context, but
928 * skb_pull() (for ether_pad and eth_type_trans()) requires
929 * the beginning of the packet in skb_headlen(), move it
931 skb_copy_to_linear_data(skb
, va
, hlen
);
932 skb_shinfo(skb
)->frags
[0].page_offset
+= hlen
;
933 skb_shinfo(skb
)->frags
[0].size
-= hlen
;
934 skb
->data_len
-= hlen
;
936 skb_pull(skb
, MXGEFW_PAD
);
940 myri10ge_alloc_rx_pages(struct myri10ge_priv
*mgp
, struct myri10ge_rx_buf
*rx
,
941 int bytes
, int watchdog
)
946 if (unlikely(rx
->watchdog_needed
&& !watchdog
))
949 /* try to refill entire ring */
950 while (rx
->fill_cnt
!= (rx
->cnt
+ rx
->mask
+ 1)) {
951 idx
= rx
->fill_cnt
& rx
->mask
;
952 if (rx
->page_offset
+ bytes
<= MYRI10GE_ALLOC_SIZE
) {
953 /* we can use part of previous page */
956 /* we need a new page */
958 alloc_pages(GFP_ATOMIC
| __GFP_COMP
,
959 MYRI10GE_ALLOC_ORDER
);
960 if (unlikely(page
== NULL
)) {
961 if (rx
->fill_cnt
- rx
->cnt
< 16)
962 rx
->watchdog_needed
= 1;
967 rx
->bus
= pci_map_page(mgp
->pdev
, page
, 0,
971 rx
->info
[idx
].page
= rx
->page
;
972 rx
->info
[idx
].page_offset
= rx
->page_offset
;
973 /* note that this is the address of the start of the
975 pci_unmap_addr_set(&rx
->info
[idx
], bus
, rx
->bus
);
976 rx
->shadow
[idx
].addr_low
=
977 htonl(MYRI10GE_LOWPART_TO_U32(rx
->bus
) + rx
->page_offset
);
978 rx
->shadow
[idx
].addr_high
=
979 htonl(MYRI10GE_HIGHPART_TO_U32(rx
->bus
));
981 /* start next packet on a cacheline boundary */
982 rx
->page_offset
+= SKB_DATA_ALIGN(bytes
);
984 #if MYRI10GE_ALLOC_SIZE > 4096
985 /* don't cross a 4KB boundary */
986 if ((rx
->page_offset
>> 12) !=
987 ((rx
->page_offset
+ bytes
- 1) >> 12))
988 rx
->page_offset
= (rx
->page_offset
+ 4096) & ~4095;
992 /* copy 8 descriptors to the firmware at a time */
993 if ((idx
& 7) == 7) {
994 if (rx
->wc_fifo
== NULL
)
995 myri10ge_submit_8rx(&rx
->lanai
[idx
- 7],
996 &rx
->shadow
[idx
- 7]);
999 myri10ge_pio_copy(rx
->wc_fifo
,
1000 &rx
->shadow
[idx
- 7], 64);
1007 myri10ge_unmap_rx_page(struct pci_dev
*pdev
,
1008 struct myri10ge_rx_buffer_state
*info
, int bytes
)
1010 /* unmap the recvd page if we're the only or last user of it */
1011 if (bytes
>= MYRI10GE_ALLOC_SIZE
/ 2 ||
1012 (info
->page_offset
+ 2 * bytes
) > MYRI10GE_ALLOC_SIZE
) {
1013 pci_unmap_page(pdev
, (pci_unmap_addr(info
, bus
)
1014 & ~(MYRI10GE_ALLOC_SIZE
- 1)),
1015 MYRI10GE_ALLOC_SIZE
, PCI_DMA_FROMDEVICE
);
1019 #define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
1020 * page into an skb */
1023 myri10ge_rx_done(struct myri10ge_priv
*mgp
, struct myri10ge_rx_buf
*rx
,
1024 int bytes
, int len
, __wsum csum
)
1026 struct sk_buff
*skb
;
1027 struct skb_frag_struct rx_frags
[MYRI10GE_MAX_FRAGS_PER_FRAME
];
1028 int i
, idx
, hlen
, remainder
;
1029 struct pci_dev
*pdev
= mgp
->pdev
;
1030 struct net_device
*dev
= mgp
->dev
;
1034 idx
= rx
->cnt
& rx
->mask
;
1035 va
= page_address(rx
->info
[idx
].page
) + rx
->info
[idx
].page_offset
;
1037 /* Fill skb_frag_struct(s) with data from our receive */
1038 for (i
= 0, remainder
= len
; remainder
> 0; i
++) {
1039 myri10ge_unmap_rx_page(pdev
, &rx
->info
[idx
], bytes
);
1040 rx_frags
[i
].page
= rx
->info
[idx
].page
;
1041 rx_frags
[i
].page_offset
= rx
->info
[idx
].page_offset
;
1042 if (remainder
< MYRI10GE_ALLOC_SIZE
)
1043 rx_frags
[i
].size
= remainder
;
1045 rx_frags
[i
].size
= MYRI10GE_ALLOC_SIZE
;
1047 idx
= rx
->cnt
& rx
->mask
;
1048 remainder
-= MYRI10GE_ALLOC_SIZE
;
1051 if (mgp
->csum_flag
&& myri10ge_lro
) {
1052 rx_frags
[0].page_offset
+= MXGEFW_PAD
;
1053 rx_frags
[0].size
-= MXGEFW_PAD
;
1055 lro_receive_frags(&mgp
->rx_done
.lro_mgr
, rx_frags
,
1057 /* opaque, will come back in get_frag_header */
1058 (void *)(__force
unsigned long)csum
,
1063 hlen
= MYRI10GE_HLEN
> len
? len
: MYRI10GE_HLEN
;
1065 /* allocate an skb to attach the page(s) to. This is done
1066 * after trying LRO, so as to avoid skb allocation overheads */
1068 skb
= netdev_alloc_skb(dev
, MYRI10GE_HLEN
+ 16);
1069 if (unlikely(skb
== NULL
)) {
1070 mgp
->stats
.rx_dropped
++;
1073 put_page(rx_frags
[i
].page
);
1078 /* Attach the pages to the skb, and trim off any padding */
1079 myri10ge_rx_skb_build(skb
, va
, rx_frags
, len
, hlen
);
1080 if (skb_shinfo(skb
)->frags
[0].size
<= 0) {
1081 put_page(skb_shinfo(skb
)->frags
[0].page
);
1082 skb_shinfo(skb
)->nr_frags
= 0;
1084 skb
->protocol
= eth_type_trans(skb
, dev
);
1086 if (mgp
->csum_flag
) {
1087 if ((skb
->protocol
== htons(ETH_P_IP
)) ||
1088 (skb
->protocol
== htons(ETH_P_IPV6
))) {
1090 skb
->ip_summed
= CHECKSUM_COMPLETE
;
1092 myri10ge_vlan_ip_csum(skb
, csum
);
1094 netif_receive_skb(skb
);
1095 dev
->last_rx
= jiffies
;
1099 static inline void myri10ge_tx_done(struct myri10ge_priv
*mgp
, int mcp_index
)
1101 struct pci_dev
*pdev
= mgp
->pdev
;
1102 struct myri10ge_tx_buf
*tx
= &mgp
->tx
;
1103 struct sk_buff
*skb
;
1106 while (tx
->pkt_done
!= mcp_index
) {
1107 idx
= tx
->done
& tx
->mask
;
1108 skb
= tx
->info
[idx
].skb
;
1111 tx
->info
[idx
].skb
= NULL
;
1112 if (tx
->info
[idx
].last
) {
1114 tx
->info
[idx
].last
= 0;
1117 len
= pci_unmap_len(&tx
->info
[idx
], len
);
1118 pci_unmap_len_set(&tx
->info
[idx
], len
, 0);
1120 mgp
->stats
.tx_bytes
+= skb
->len
;
1121 mgp
->stats
.tx_packets
++;
1122 dev_kfree_skb_irq(skb
);
1124 pci_unmap_single(pdev
,
1125 pci_unmap_addr(&tx
->info
[idx
],
1130 pci_unmap_page(pdev
,
1131 pci_unmap_addr(&tx
->info
[idx
],
1136 /* start the queue if we've stopped it */
1137 if (netif_queue_stopped(mgp
->dev
)
1138 && tx
->req
- tx
->done
< (tx
->mask
>> 1)) {
1140 netif_wake_queue(mgp
->dev
);
1144 static inline int myri10ge_clean_rx_done(struct myri10ge_priv
*mgp
, int budget
)
1146 struct myri10ge_rx_done
*rx_done
= &mgp
->rx_done
;
1147 unsigned long rx_bytes
= 0;
1148 unsigned long rx_packets
= 0;
1149 unsigned long rx_ok
;
1151 int idx
= rx_done
->idx
;
1152 int cnt
= rx_done
->cnt
;
1157 while (rx_done
->entry
[idx
].length
!= 0 && work_done
< budget
) {
1158 length
= ntohs(rx_done
->entry
[idx
].length
);
1159 rx_done
->entry
[idx
].length
= 0;
1160 checksum
= csum_unfold(rx_done
->entry
[idx
].checksum
);
1161 if (length
<= mgp
->small_bytes
)
1162 rx_ok
= myri10ge_rx_done(mgp
, &mgp
->rx_small
,
1166 rx_ok
= myri10ge_rx_done(mgp
, &mgp
->rx_big
,
1169 rx_packets
+= rx_ok
;
1170 rx_bytes
+= rx_ok
* (unsigned long)length
;
1172 idx
= cnt
& (myri10ge_max_intr_slots
- 1);
1177 mgp
->stats
.rx_packets
+= rx_packets
;
1178 mgp
->stats
.rx_bytes
+= rx_bytes
;
1181 lro_flush_all(&rx_done
->lro_mgr
);
1183 /* restock receive rings if needed */
1184 if (mgp
->rx_small
.fill_cnt
- mgp
->rx_small
.cnt
< myri10ge_fill_thresh
)
1185 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_small
,
1186 mgp
->small_bytes
+ MXGEFW_PAD
, 0);
1187 if (mgp
->rx_big
.fill_cnt
- mgp
->rx_big
.cnt
< myri10ge_fill_thresh
)
1188 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_big
, mgp
->big_bytes
, 0);
1193 static inline void myri10ge_check_statblock(struct myri10ge_priv
*mgp
)
1195 struct mcp_irq_data
*stats
= mgp
->fw_stats
;
1197 if (unlikely(stats
->stats_updated
)) {
1198 unsigned link_up
= ntohl(stats
->link_up
);
1199 if (mgp
->link_state
!= link_up
) {
1200 mgp
->link_state
= link_up
;
1202 if (mgp
->link_state
== MXGEFW_LINK_UP
) {
1203 if (netif_msg_link(mgp
))
1205 "myri10ge: %s: link up\n",
1207 netif_carrier_on(mgp
->dev
);
1208 mgp
->link_changes
++;
1210 if (netif_msg_link(mgp
))
1212 "myri10ge: %s: link %s\n",
1214 (link_up
== MXGEFW_LINK_MYRINET
?
1215 "mismatch (Myrinet detected)" :
1217 netif_carrier_off(mgp
->dev
);
1218 mgp
->link_changes
++;
1221 if (mgp
->rdma_tags_available
!=
1222 ntohl(mgp
->fw_stats
->rdma_tags_available
)) {
1223 mgp
->rdma_tags_available
=
1224 ntohl(mgp
->fw_stats
->rdma_tags_available
);
1225 printk(KERN_WARNING
"myri10ge: %s: RDMA timed out! "
1226 "%d tags left\n", mgp
->dev
->name
,
1227 mgp
->rdma_tags_available
);
1229 mgp
->down_cnt
+= stats
->link_down
;
1230 if (stats
->link_down
)
1231 wake_up(&mgp
->down_wq
);
1235 static int myri10ge_poll(struct napi_struct
*napi
, int budget
)
1237 struct myri10ge_priv
*mgp
=
1238 container_of(napi
, struct myri10ge_priv
, napi
);
1239 struct net_device
*netdev
= mgp
->dev
;
1242 /* process as many rx events as NAPI will allow */
1243 work_done
= myri10ge_clean_rx_done(mgp
, budget
);
1245 if (work_done
< budget
) {
1246 netif_rx_complete(netdev
, napi
);
1247 put_be32(htonl(3), mgp
->irq_claim
);
1252 static irqreturn_t
myri10ge_intr(int irq
, void *arg
)
1254 struct myri10ge_priv
*mgp
= arg
;
1255 struct mcp_irq_data
*stats
= mgp
->fw_stats
;
1256 struct myri10ge_tx_buf
*tx
= &mgp
->tx
;
1257 u32 send_done_count
;
1260 /* make sure it is our IRQ, and that the DMA has finished */
1261 if (unlikely(!stats
->valid
))
1264 /* low bit indicates receives are present, so schedule
1265 * napi poll handler */
1266 if (stats
->valid
& 1)
1267 netif_rx_schedule(mgp
->dev
, &mgp
->napi
);
1269 if (!mgp
->msi_enabled
) {
1270 put_be32(0, mgp
->irq_deassert
);
1271 if (!myri10ge_deassert_wait
)
1277 /* Wait for IRQ line to go low, if using INTx */
1281 /* check for transmit completes and receives */
1282 send_done_count
= ntohl(stats
->send_done_count
);
1283 if (send_done_count
!= tx
->pkt_done
)
1284 myri10ge_tx_done(mgp
, (int)send_done_count
);
1285 if (unlikely(i
> myri10ge_max_irq_loops
)) {
1286 printk(KERN_WARNING
"myri10ge: %s: irq stuck?\n",
1289 schedule_work(&mgp
->watchdog_work
);
1291 if (likely(stats
->valid
== 0))
1297 myri10ge_check_statblock(mgp
);
1299 put_be32(htonl(3), mgp
->irq_claim
+ 1);
1300 return (IRQ_HANDLED
);
1304 myri10ge_get_settings(struct net_device
*netdev
, struct ethtool_cmd
*cmd
)
1306 cmd
->autoneg
= AUTONEG_DISABLE
;
1307 cmd
->speed
= SPEED_10000
;
1308 cmd
->duplex
= DUPLEX_FULL
;
1313 myri10ge_get_drvinfo(struct net_device
*netdev
, struct ethtool_drvinfo
*info
)
1315 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1317 strlcpy(info
->driver
, "myri10ge", sizeof(info
->driver
));
1318 strlcpy(info
->version
, MYRI10GE_VERSION_STR
, sizeof(info
->version
));
1319 strlcpy(info
->fw_version
, mgp
->fw_version
, sizeof(info
->fw_version
));
1320 strlcpy(info
->bus_info
, pci_name(mgp
->pdev
), sizeof(info
->bus_info
));
1324 myri10ge_get_coalesce(struct net_device
*netdev
, struct ethtool_coalesce
*coal
)
1326 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1327 coal
->rx_coalesce_usecs
= mgp
->intr_coal_delay
;
1332 myri10ge_set_coalesce(struct net_device
*netdev
, struct ethtool_coalesce
*coal
)
1334 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1336 mgp
->intr_coal_delay
= coal
->rx_coalesce_usecs
;
1337 put_be32(htonl(mgp
->intr_coal_delay
), mgp
->intr_coal_delay_ptr
);
1342 myri10ge_get_pauseparam(struct net_device
*netdev
,
1343 struct ethtool_pauseparam
*pause
)
1345 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1348 pause
->rx_pause
= mgp
->pause
;
1349 pause
->tx_pause
= mgp
->pause
;
1353 myri10ge_set_pauseparam(struct net_device
*netdev
,
1354 struct ethtool_pauseparam
*pause
)
1356 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1358 if (pause
->tx_pause
!= mgp
->pause
)
1359 return myri10ge_change_pause(mgp
, pause
->tx_pause
);
1360 if (pause
->rx_pause
!= mgp
->pause
)
1361 return myri10ge_change_pause(mgp
, pause
->tx_pause
);
1362 if (pause
->autoneg
!= 0)
1368 myri10ge_get_ringparam(struct net_device
*netdev
,
1369 struct ethtool_ringparam
*ring
)
1371 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1373 ring
->rx_mini_max_pending
= mgp
->rx_small
.mask
+ 1;
1374 ring
->rx_max_pending
= mgp
->rx_big
.mask
+ 1;
1375 ring
->rx_jumbo_max_pending
= 0;
1376 ring
->tx_max_pending
= mgp
->rx_small
.mask
+ 1;
1377 ring
->rx_mini_pending
= ring
->rx_mini_max_pending
;
1378 ring
->rx_pending
= ring
->rx_max_pending
;
1379 ring
->rx_jumbo_pending
= ring
->rx_jumbo_max_pending
;
1380 ring
->tx_pending
= ring
->tx_max_pending
;
1383 static u32
myri10ge_get_rx_csum(struct net_device
*netdev
)
1385 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1392 static int myri10ge_set_rx_csum(struct net_device
*netdev
, u32 csum_enabled
)
1394 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1396 mgp
->csum_flag
= MXGEFW_FLAGS_CKSUM
;
1402 static int myri10ge_set_tso(struct net_device
*netdev
, u32 tso_enabled
)
1404 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1405 unsigned long flags
= mgp
->features
& (NETIF_F_TSO6
| NETIF_F_TSO
);
1408 netdev
->features
|= flags
;
1410 netdev
->features
&= ~flags
;
1414 static const char myri10ge_gstrings_stats
[][ETH_GSTRING_LEN
] = {
1415 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1416 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1417 "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1418 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1419 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1420 "tx_heartbeat_errors", "tx_window_errors",
1421 /* device-specific stats */
1422 "tx_boundary", "WC", "irq", "MSI",
1423 "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1424 "serial_number", "tx_pkt_start", "tx_pkt_done",
1425 "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
1426 "wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
1427 "link_changes", "link_up", "dropped_link_overflow",
1428 "dropped_link_error_or_filtered",
1429 "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1430 "dropped_unicast_filtered", "dropped_multicast_filtered",
1431 "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1432 "dropped_no_big_buffer", "LRO aggregated", "LRO flushed",
1433 "LRO avg aggr", "LRO no_desc"
1436 #define MYRI10GE_NET_STATS_LEN 21
1437 #define MYRI10GE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_stats)
1440 myri10ge_get_strings(struct net_device
*netdev
, u32 stringset
, u8
* data
)
1442 switch (stringset
) {
1444 memcpy(data
, *myri10ge_gstrings_stats
,
1445 sizeof(myri10ge_gstrings_stats
));
1450 static int myri10ge_get_sset_count(struct net_device
*netdev
, int sset
)
1454 return MYRI10GE_STATS_LEN
;
1461 myri10ge_get_ethtool_stats(struct net_device
*netdev
,
1462 struct ethtool_stats
*stats
, u64
* data
)
1464 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1467 for (i
= 0; i
< MYRI10GE_NET_STATS_LEN
; i
++)
1468 data
[i
] = ((unsigned long *)&mgp
->stats
)[i
];
1470 data
[i
++] = (unsigned int)mgp
->tx
.boundary
;
1471 data
[i
++] = (unsigned int)mgp
->wc_enabled
;
1472 data
[i
++] = (unsigned int)mgp
->pdev
->irq
;
1473 data
[i
++] = (unsigned int)mgp
->msi_enabled
;
1474 data
[i
++] = (unsigned int)mgp
->read_dma
;
1475 data
[i
++] = (unsigned int)mgp
->write_dma
;
1476 data
[i
++] = (unsigned int)mgp
->read_write_dma
;
1477 data
[i
++] = (unsigned int)mgp
->serial_number
;
1478 data
[i
++] = (unsigned int)mgp
->tx
.pkt_start
;
1479 data
[i
++] = (unsigned int)mgp
->tx
.pkt_done
;
1480 data
[i
++] = (unsigned int)mgp
->tx
.req
;
1481 data
[i
++] = (unsigned int)mgp
->tx
.done
;
1482 data
[i
++] = (unsigned int)mgp
->rx_small
.cnt
;
1483 data
[i
++] = (unsigned int)mgp
->rx_big
.cnt
;
1484 data
[i
++] = (unsigned int)mgp
->wake_queue
;
1485 data
[i
++] = (unsigned int)mgp
->stop_queue
;
1486 data
[i
++] = (unsigned int)mgp
->watchdog_resets
;
1487 data
[i
++] = (unsigned int)mgp
->tx_linearized
;
1488 data
[i
++] = (unsigned int)mgp
->link_changes
;
1489 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->link_up
);
1490 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_link_overflow
);
1492 (unsigned int)ntohl(mgp
->fw_stats
->dropped_link_error_or_filtered
);
1493 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_pause
);
1494 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_bad_phy
);
1495 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_bad_crc32
);
1497 (unsigned int)ntohl(mgp
->fw_stats
->dropped_unicast_filtered
);
1499 (unsigned int)ntohl(mgp
->fw_stats
->dropped_multicast_filtered
);
1500 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_runt
);
1501 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_overrun
);
1502 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_no_small_buffer
);
1503 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_no_big_buffer
);
1504 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.aggregated
;
1505 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.flushed
;
1506 if (mgp
->rx_done
.lro_mgr
.stats
.flushed
)
1507 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.aggregated
/
1508 mgp
->rx_done
.lro_mgr
.stats
.flushed
;
1511 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.no_desc
;
1514 static void myri10ge_set_msglevel(struct net_device
*netdev
, u32 value
)
1516 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1517 mgp
->msg_enable
= value
;
1520 static u32
myri10ge_get_msglevel(struct net_device
*netdev
)
1522 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1523 return mgp
->msg_enable
;
1526 static const struct ethtool_ops myri10ge_ethtool_ops
= {
1527 .get_settings
= myri10ge_get_settings
,
1528 .get_drvinfo
= myri10ge_get_drvinfo
,
1529 .get_coalesce
= myri10ge_get_coalesce
,
1530 .set_coalesce
= myri10ge_set_coalesce
,
1531 .get_pauseparam
= myri10ge_get_pauseparam
,
1532 .set_pauseparam
= myri10ge_set_pauseparam
,
1533 .get_ringparam
= myri10ge_get_ringparam
,
1534 .get_rx_csum
= myri10ge_get_rx_csum
,
1535 .set_rx_csum
= myri10ge_set_rx_csum
,
1536 .set_tx_csum
= ethtool_op_set_tx_hw_csum
,
1537 .set_sg
= ethtool_op_set_sg
,
1538 .set_tso
= myri10ge_set_tso
,
1539 .get_link
= ethtool_op_get_link
,
1540 .get_strings
= myri10ge_get_strings
,
1541 .get_sset_count
= myri10ge_get_sset_count
,
1542 .get_ethtool_stats
= myri10ge_get_ethtool_stats
,
1543 .set_msglevel
= myri10ge_set_msglevel
,
1544 .get_msglevel
= myri10ge_get_msglevel
1547 static int myri10ge_allocate_rings(struct net_device
*dev
)
1549 struct myri10ge_priv
*mgp
;
1550 struct myri10ge_cmd cmd
;
1551 int tx_ring_size
, rx_ring_size
;
1552 int tx_ring_entries
, rx_ring_entries
;
1556 mgp
= netdev_priv(dev
);
1558 /* get ring sizes */
1560 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SEND_RING_SIZE
, &cmd
, 0);
1561 tx_ring_size
= cmd
.data0
;
1562 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_RX_RING_SIZE
, &cmd
, 0);
1565 rx_ring_size
= cmd
.data0
;
1567 tx_ring_entries
= tx_ring_size
/ sizeof(struct mcp_kreq_ether_send
);
1568 rx_ring_entries
= rx_ring_size
/ sizeof(struct mcp_dma_addr
);
1569 mgp
->tx
.mask
= tx_ring_entries
- 1;
1570 mgp
->rx_small
.mask
= mgp
->rx_big
.mask
= rx_ring_entries
- 1;
1574 /* allocate the host shadow rings */
1576 bytes
= 8 + (MYRI10GE_MAX_SEND_DESC_TSO
+ 4)
1577 * sizeof(*mgp
->tx
.req_list
);
1578 mgp
->tx
.req_bytes
= kzalloc(bytes
, GFP_KERNEL
);
1579 if (mgp
->tx
.req_bytes
== NULL
)
1580 goto abort_with_nothing
;
1582 /* ensure req_list entries are aligned to 8 bytes */
1583 mgp
->tx
.req_list
= (struct mcp_kreq_ether_send
*)
1584 ALIGN((unsigned long)mgp
->tx
.req_bytes
, 8);
1586 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_small
.shadow
);
1587 mgp
->rx_small
.shadow
= kzalloc(bytes
, GFP_KERNEL
);
1588 if (mgp
->rx_small
.shadow
== NULL
)
1589 goto abort_with_tx_req_bytes
;
1591 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_big
.shadow
);
1592 mgp
->rx_big
.shadow
= kzalloc(bytes
, GFP_KERNEL
);
1593 if (mgp
->rx_big
.shadow
== NULL
)
1594 goto abort_with_rx_small_shadow
;
1596 /* allocate the host info rings */
1598 bytes
= tx_ring_entries
* sizeof(*mgp
->tx
.info
);
1599 mgp
->tx
.info
= kzalloc(bytes
, GFP_KERNEL
);
1600 if (mgp
->tx
.info
== NULL
)
1601 goto abort_with_rx_big_shadow
;
1603 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_small
.info
);
1604 mgp
->rx_small
.info
= kzalloc(bytes
, GFP_KERNEL
);
1605 if (mgp
->rx_small
.info
== NULL
)
1606 goto abort_with_tx_info
;
1608 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_big
.info
);
1609 mgp
->rx_big
.info
= kzalloc(bytes
, GFP_KERNEL
);
1610 if (mgp
->rx_big
.info
== NULL
)
1611 goto abort_with_rx_small_info
;
1613 /* Fill the receive rings */
1614 mgp
->rx_big
.cnt
= 0;
1615 mgp
->rx_small
.cnt
= 0;
1616 mgp
->rx_big
.fill_cnt
= 0;
1617 mgp
->rx_small
.fill_cnt
= 0;
1618 mgp
->rx_small
.page_offset
= MYRI10GE_ALLOC_SIZE
;
1619 mgp
->rx_big
.page_offset
= MYRI10GE_ALLOC_SIZE
;
1620 mgp
->rx_small
.watchdog_needed
= 0;
1621 mgp
->rx_big
.watchdog_needed
= 0;
1622 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_small
,
1623 mgp
->small_bytes
+ MXGEFW_PAD
, 0);
1625 if (mgp
->rx_small
.fill_cnt
< mgp
->rx_small
.mask
+ 1) {
1626 printk(KERN_ERR
"myri10ge: %s: alloced only %d small bufs\n",
1627 dev
->name
, mgp
->rx_small
.fill_cnt
);
1628 goto abort_with_rx_small_ring
;
1631 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_big
, mgp
->big_bytes
, 0);
1632 if (mgp
->rx_big
.fill_cnt
< mgp
->rx_big
.mask
+ 1) {
1633 printk(KERN_ERR
"myri10ge: %s: alloced only %d big bufs\n",
1634 dev
->name
, mgp
->rx_big
.fill_cnt
);
1635 goto abort_with_rx_big_ring
;
1640 abort_with_rx_big_ring
:
1641 for (i
= mgp
->rx_big
.cnt
; i
< mgp
->rx_big
.fill_cnt
; i
++) {
1642 int idx
= i
& mgp
->rx_big
.mask
;
1643 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_big
.info
[idx
],
1645 put_page(mgp
->rx_big
.info
[idx
].page
);
1648 abort_with_rx_small_ring
:
1649 for (i
= mgp
->rx_small
.cnt
; i
< mgp
->rx_small
.fill_cnt
; i
++) {
1650 int idx
= i
& mgp
->rx_small
.mask
;
1651 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_small
.info
[idx
],
1652 mgp
->small_bytes
+ MXGEFW_PAD
);
1653 put_page(mgp
->rx_small
.info
[idx
].page
);
1656 kfree(mgp
->rx_big
.info
);
1658 abort_with_rx_small_info
:
1659 kfree(mgp
->rx_small
.info
);
1662 kfree(mgp
->tx
.info
);
1664 abort_with_rx_big_shadow
:
1665 kfree(mgp
->rx_big
.shadow
);
1667 abort_with_rx_small_shadow
:
1668 kfree(mgp
->rx_small
.shadow
);
1670 abort_with_tx_req_bytes
:
1671 kfree(mgp
->tx
.req_bytes
);
1672 mgp
->tx
.req_bytes
= NULL
;
1673 mgp
->tx
.req_list
= NULL
;
1679 static void myri10ge_free_rings(struct net_device
*dev
)
1681 struct myri10ge_priv
*mgp
;
1682 struct sk_buff
*skb
;
1683 struct myri10ge_tx_buf
*tx
;
1686 mgp
= netdev_priv(dev
);
1688 for (i
= mgp
->rx_big
.cnt
; i
< mgp
->rx_big
.fill_cnt
; i
++) {
1689 idx
= i
& mgp
->rx_big
.mask
;
1690 if (i
== mgp
->rx_big
.fill_cnt
- 1)
1691 mgp
->rx_big
.info
[idx
].page_offset
= MYRI10GE_ALLOC_SIZE
;
1692 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_big
.info
[idx
],
1694 put_page(mgp
->rx_big
.info
[idx
].page
);
1697 for (i
= mgp
->rx_small
.cnt
; i
< mgp
->rx_small
.fill_cnt
; i
++) {
1698 idx
= i
& mgp
->rx_small
.mask
;
1699 if (i
== mgp
->rx_small
.fill_cnt
- 1)
1700 mgp
->rx_small
.info
[idx
].page_offset
=
1701 MYRI10GE_ALLOC_SIZE
;
1702 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_small
.info
[idx
],
1703 mgp
->small_bytes
+ MXGEFW_PAD
);
1704 put_page(mgp
->rx_small
.info
[idx
].page
);
1707 while (tx
->done
!= tx
->req
) {
1708 idx
= tx
->done
& tx
->mask
;
1709 skb
= tx
->info
[idx
].skb
;
1712 tx
->info
[idx
].skb
= NULL
;
1714 len
= pci_unmap_len(&tx
->info
[idx
], len
);
1715 pci_unmap_len_set(&tx
->info
[idx
], len
, 0);
1717 mgp
->stats
.tx_dropped
++;
1718 dev_kfree_skb_any(skb
);
1720 pci_unmap_single(mgp
->pdev
,
1721 pci_unmap_addr(&tx
->info
[idx
],
1726 pci_unmap_page(mgp
->pdev
,
1727 pci_unmap_addr(&tx
->info
[idx
],
1732 kfree(mgp
->rx_big
.info
);
1734 kfree(mgp
->rx_small
.info
);
1736 kfree(mgp
->tx
.info
);
1738 kfree(mgp
->rx_big
.shadow
);
1740 kfree(mgp
->rx_small
.shadow
);
1742 kfree(mgp
->tx
.req_bytes
);
1743 mgp
->tx
.req_bytes
= NULL
;
1744 mgp
->tx
.req_list
= NULL
;
1747 static int myri10ge_request_irq(struct myri10ge_priv
*mgp
)
1749 struct pci_dev
*pdev
= mgp
->pdev
;
1753 status
= pci_enable_msi(pdev
);
1756 "Error %d setting up MSI; falling back to xPIC\n",
1759 mgp
->msi_enabled
= 1;
1761 mgp
->msi_enabled
= 0;
1763 status
= request_irq(pdev
->irq
, myri10ge_intr
, IRQF_SHARED
,
1764 mgp
->dev
->name
, mgp
);
1766 dev_err(&pdev
->dev
, "failed to allocate IRQ\n");
1767 if (mgp
->msi_enabled
)
1768 pci_disable_msi(pdev
);
1773 static void myri10ge_free_irq(struct myri10ge_priv
*mgp
)
1775 struct pci_dev
*pdev
= mgp
->pdev
;
1777 free_irq(pdev
->irq
, mgp
);
1778 if (mgp
->msi_enabled
)
1779 pci_disable_msi(pdev
);
1783 myri10ge_get_frag_header(struct skb_frag_struct
*frag
, void **mac_hdr
,
1784 void **ip_hdr
, void **tcpudp_hdr
,
1785 u64
* hdr_flags
, void *priv
)
1788 struct vlan_ethhdr
*veh
;
1790 u8
*va
= page_address(frag
->page
) + frag
->page_offset
;
1791 unsigned long ll_hlen
;
1792 /* passed opaque through lro_receive_frags() */
1793 __wsum csum
= (__force __wsum
) (unsigned long)priv
;
1795 /* find the mac header, aborting if not IPv4 */
1797 eh
= (struct ethhdr
*)va
;
1800 if (eh
->h_proto
!= htons(ETH_P_IP
)) {
1801 if (eh
->h_proto
== htons(ETH_P_8021Q
)) {
1802 veh
= (struct vlan_ethhdr
*)va
;
1803 if (veh
->h_vlan_encapsulated_proto
!= htons(ETH_P_IP
))
1806 ll_hlen
+= VLAN_HLEN
;
1809 * HW checksum starts ETH_HLEN bytes into
1810 * frame, so we must subtract off the VLAN
1811 * header's checksum before csum can be used
1813 csum
= csum_sub(csum
, csum_partial(va
+ ETH_HLEN
,
1819 *hdr_flags
= LRO_IPV4
;
1821 iph
= (struct iphdr
*)(va
+ ll_hlen
);
1823 if (iph
->protocol
!= IPPROTO_TCP
)
1825 *hdr_flags
|= LRO_TCP
;
1826 *tcpudp_hdr
= (u8
*) (*ip_hdr
) + (iph
->ihl
<< 2);
1828 /* verify the IP checksum */
1829 if (unlikely(ip_fast_csum((u8
*) iph
, iph
->ihl
)))
1832 /* verify the checksum */
1833 if (unlikely(csum_tcpudp_magic(iph
->saddr
, iph
->daddr
,
1834 ntohs(iph
->tot_len
) - (iph
->ihl
<< 2),
1835 IPPROTO_TCP
, csum
)))
1841 static int myri10ge_open(struct net_device
*dev
)
1843 struct myri10ge_priv
*mgp
;
1844 struct myri10ge_cmd cmd
;
1845 struct net_lro_mgr
*lro_mgr
;
1846 int status
, big_pow2
;
1848 mgp
= netdev_priv(dev
);
1850 if (mgp
->running
!= MYRI10GE_ETH_STOPPED
)
1853 mgp
->running
= MYRI10GE_ETH_STARTING
;
1854 status
= myri10ge_reset(mgp
);
1856 printk(KERN_ERR
"myri10ge: %s: failed reset\n", dev
->name
);
1857 goto abort_with_nothing
;
1860 status
= myri10ge_request_irq(mgp
);
1862 goto abort_with_nothing
;
1864 /* decide what small buffer size to use. For good TCP rx
1865 * performance, it is important to not receive 1514 byte
1866 * frames into jumbo buffers, as it confuses the socket buffer
1867 * accounting code, leading to drops and erratic performance.
1870 if (dev
->mtu
<= ETH_DATA_LEN
)
1871 /* enough for a TCP header */
1872 mgp
->small_bytes
= (128 > SMP_CACHE_BYTES
)
1873 ? (128 - MXGEFW_PAD
)
1874 : (SMP_CACHE_BYTES
- MXGEFW_PAD
);
1876 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
1877 mgp
->small_bytes
= VLAN_ETH_FRAME_LEN
;
1879 /* Override the small buffer size? */
1880 if (myri10ge_small_bytes
> 0)
1881 mgp
->small_bytes
= myri10ge_small_bytes
;
1883 /* get the lanai pointers to the send and receive rings */
1885 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SEND_OFFSET
, &cmd
, 0);
1887 (struct mcp_kreq_ether_send __iomem
*)(mgp
->sram
+ cmd
.data0
);
1890 myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SMALL_RX_OFFSET
, &cmd
, 0);
1891 mgp
->rx_small
.lanai
=
1892 (struct mcp_kreq_ether_recv __iomem
*)(mgp
->sram
+ cmd
.data0
);
1894 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_BIG_RX_OFFSET
, &cmd
, 0);
1896 (struct mcp_kreq_ether_recv __iomem
*)(mgp
->sram
+ cmd
.data0
);
1900 "myri10ge: %s: failed to get ring sizes or locations\n",
1902 mgp
->running
= MYRI10GE_ETH_STOPPED
;
1903 goto abort_with_irq
;
1906 if (myri10ge_wcfifo
&& mgp
->wc_enabled
) {
1907 mgp
->tx
.wc_fifo
= (u8 __iomem
*) mgp
->sram
+ MXGEFW_ETH_SEND_4
;
1908 mgp
->rx_small
.wc_fifo
=
1909 (u8 __iomem
*) mgp
->sram
+ MXGEFW_ETH_RECV_SMALL
;
1910 mgp
->rx_big
.wc_fifo
=
1911 (u8 __iomem
*) mgp
->sram
+ MXGEFW_ETH_RECV_BIG
;
1913 mgp
->tx
.wc_fifo
= NULL
;
1914 mgp
->rx_small
.wc_fifo
= NULL
;
1915 mgp
->rx_big
.wc_fifo
= NULL
;
1918 /* Firmware needs the big buff size as a power of 2. Lie and
1919 * tell him the buffer is larger, because we only use 1
1920 * buffer/pkt, and the mtu will prevent overruns.
1922 big_pow2
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
+ MXGEFW_PAD
;
1923 if (big_pow2
< MYRI10GE_ALLOC_SIZE
/ 2) {
1924 while (!is_power_of_2(big_pow2
))
1926 mgp
->big_bytes
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
+ MXGEFW_PAD
;
1928 big_pow2
= MYRI10GE_ALLOC_SIZE
;
1929 mgp
->big_bytes
= big_pow2
;
1932 status
= myri10ge_allocate_rings(dev
);
1934 goto abort_with_irq
;
1936 /* now give firmware buffers sizes, and MTU */
1937 cmd
.data0
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
;
1938 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_MTU
, &cmd
, 0);
1939 cmd
.data0
= mgp
->small_bytes
;
1941 myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE
, &cmd
, 0);
1942 cmd
.data0
= big_pow2
;
1944 myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_BIG_BUFFER_SIZE
, &cmd
, 0);
1946 printk(KERN_ERR
"myri10ge: %s: Couldn't set buffer sizes\n",
1948 goto abort_with_rings
;
1951 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(mgp
->fw_stats_bus
);
1952 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(mgp
->fw_stats_bus
);
1953 cmd
.data2
= sizeof(struct mcp_irq_data
);
1954 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_STATS_DMA_V2
, &cmd
, 0);
1955 if (status
== -ENOSYS
) {
1956 dma_addr_t bus
= mgp
->fw_stats_bus
;
1957 bus
+= offsetof(struct mcp_irq_data
, send_done_count
);
1958 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(bus
);
1959 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(bus
);
1960 status
= myri10ge_send_cmd(mgp
,
1961 MXGEFW_CMD_SET_STATS_DMA_OBSOLETE
,
1963 /* Firmware cannot support multicast without STATS_DMA_V2 */
1964 mgp
->fw_multicast_support
= 0;
1966 mgp
->fw_multicast_support
= 1;
1969 printk(KERN_ERR
"myri10ge: %s: Couldn't set stats DMA\n",
1971 goto abort_with_rings
;
1974 mgp
->link_state
= ~0U;
1975 mgp
->rdma_tags_available
= 15;
1977 lro_mgr
= &mgp
->rx_done
.lro_mgr
;
1979 lro_mgr
->features
= LRO_F_NAPI
;
1980 lro_mgr
->ip_summed
= CHECKSUM_COMPLETE
;
1981 lro_mgr
->ip_summed_aggr
= CHECKSUM_UNNECESSARY
;
1982 lro_mgr
->max_desc
= MYRI10GE_MAX_LRO_DESCRIPTORS
;
1983 lro_mgr
->lro_arr
= mgp
->rx_done
.lro_desc
;
1984 lro_mgr
->get_frag_header
= myri10ge_get_frag_header
;
1985 lro_mgr
->max_aggr
= myri10ge_lro_max_pkts
;
1986 lro_mgr
->frag_align_pad
= 2;
1987 if (lro_mgr
->max_aggr
> MAX_SKB_FRAGS
)
1988 lro_mgr
->max_aggr
= MAX_SKB_FRAGS
;
1990 napi_enable(&mgp
->napi
); /* must happen prior to any irq */
1992 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ETHERNET_UP
, &cmd
, 0);
1994 printk(KERN_ERR
"myri10ge: %s: Couldn't bring up link\n",
1996 goto abort_with_rings
;
1999 mgp
->wake_queue
= 0;
2000 mgp
->stop_queue
= 0;
2001 mgp
->running
= MYRI10GE_ETH_RUNNING
;
2002 mgp
->watchdog_timer
.expires
= jiffies
+ myri10ge_watchdog_timeout
* HZ
;
2003 add_timer(&mgp
->watchdog_timer
);
2004 netif_wake_queue(dev
);
2008 myri10ge_free_rings(dev
);
2011 myri10ge_free_irq(mgp
);
2014 mgp
->running
= MYRI10GE_ETH_STOPPED
;
2018 static int myri10ge_close(struct net_device
*dev
)
2020 struct myri10ge_priv
*mgp
;
2021 struct myri10ge_cmd cmd
;
2022 int status
, old_down_cnt
;
2024 mgp
= netdev_priv(dev
);
2026 if (mgp
->running
!= MYRI10GE_ETH_RUNNING
)
2029 if (mgp
->tx
.req_bytes
== NULL
)
2032 del_timer_sync(&mgp
->watchdog_timer
);
2033 mgp
->running
= MYRI10GE_ETH_STOPPING
;
2034 napi_disable(&mgp
->napi
);
2035 netif_carrier_off(dev
);
2036 netif_stop_queue(dev
);
2037 old_down_cnt
= mgp
->down_cnt
;
2039 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ETHERNET_DOWN
, &cmd
, 0);
2041 printk(KERN_ERR
"myri10ge: %s: Couldn't bring down link\n",
2044 wait_event_timeout(mgp
->down_wq
, old_down_cnt
!= mgp
->down_cnt
, HZ
);
2045 if (old_down_cnt
== mgp
->down_cnt
)
2046 printk(KERN_ERR
"myri10ge: %s never got down irq\n", dev
->name
);
2048 netif_tx_disable(dev
);
2049 myri10ge_free_irq(mgp
);
2050 myri10ge_free_rings(dev
);
2052 mgp
->running
= MYRI10GE_ETH_STOPPED
;
2056 /* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2057 * backwards one at a time and handle ring wraps */
2060 myri10ge_submit_req_backwards(struct myri10ge_tx_buf
*tx
,
2061 struct mcp_kreq_ether_send
*src
, int cnt
)
2063 int idx
, starting_slot
;
2064 starting_slot
= tx
->req
;
2067 idx
= (starting_slot
+ cnt
) & tx
->mask
;
2068 myri10ge_pio_copy(&tx
->lanai
[idx
], &src
[cnt
], sizeof(*src
));
2074 * copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2075 * at most 32 bytes at a time, so as to avoid involving the software
2076 * pio handler in the nic. We re-write the first segment's flags
2077 * to mark them valid only after writing the entire chain.
2081 myri10ge_submit_req(struct myri10ge_tx_buf
*tx
, struct mcp_kreq_ether_send
*src
,
2085 struct mcp_kreq_ether_send __iomem
*dstp
, *dst
;
2086 struct mcp_kreq_ether_send
*srcp
;
2089 idx
= tx
->req
& tx
->mask
;
2091 last_flags
= src
->flags
;
2094 dst
= dstp
= &tx
->lanai
[idx
];
2097 if ((idx
+ cnt
) < tx
->mask
) {
2098 for (i
= 0; i
< (cnt
- 1); i
+= 2) {
2099 myri10ge_pio_copy(dstp
, srcp
, 2 * sizeof(*src
));
2100 mb(); /* force write every 32 bytes */
2105 /* submit all but the first request, and ensure
2106 * that it is submitted below */
2107 myri10ge_submit_req_backwards(tx
, src
, cnt
);
2111 /* submit the first request */
2112 myri10ge_pio_copy(dstp
, srcp
, sizeof(*src
));
2113 mb(); /* barrier before setting valid flag */
2116 /* re-write the last 32-bits with the valid flags */
2117 src
->flags
= last_flags
;
2118 put_be32(*((__be32
*) src
+ 3), (__be32 __iomem
*) dst
+ 3);
2124 myri10ge_submit_req_wc(struct myri10ge_tx_buf
*tx
,
2125 struct mcp_kreq_ether_send
*src
, int cnt
)
2130 myri10ge_pio_copy(tx
->wc_fifo
, src
, 64);
2136 /* pad it to 64 bytes. The src is 64 bytes bigger than it
2137 * needs to be so that we don't overrun it */
2138 myri10ge_pio_copy(tx
->wc_fifo
+ MXGEFW_ETH_SEND_OFFSET(cnt
),
2145 * Transmit a packet. We need to split the packet so that a single
2146 * segment does not cross myri10ge->tx.boundary, so this makes segment
2147 * counting tricky. So rather than try to count segments up front, we
2148 * just give up if there are too few segments to hold a reasonably
2149 * fragmented packet currently available. If we run
2150 * out of segments while preparing a packet for DMA, we just linearize
2154 static int myri10ge_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
2156 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2157 struct mcp_kreq_ether_send
*req
;
2158 struct myri10ge_tx_buf
*tx
= &mgp
->tx
;
2159 struct skb_frag_struct
*frag
;
2162 __be32 high_swapped
;
2164 int idx
, last_idx
, avail
, frag_cnt
, frag_idx
, count
, mss
, max_segments
;
2165 u16 pseudo_hdr_offset
, cksum_offset
;
2166 int cum_len
, seglen
, boundary
, rdma_count
;
2171 avail
= tx
->mask
- 1 - (tx
->req
- tx
->done
);
2174 max_segments
= MXGEFW_MAX_SEND_DESC
;
2176 if (skb_is_gso(skb
)) {
2177 mss
= skb_shinfo(skb
)->gso_size
;
2178 max_segments
= MYRI10GE_MAX_SEND_DESC_TSO
;
2181 if ((unlikely(avail
< max_segments
))) {
2182 /* we are out of transmit resources */
2184 netif_stop_queue(dev
);
2188 /* Setup checksum offloading, if needed */
2190 pseudo_hdr_offset
= 0;
2192 flags
= (MXGEFW_FLAGS_NO_TSO
| MXGEFW_FLAGS_FIRST
);
2193 if (likely(skb
->ip_summed
== CHECKSUM_PARTIAL
)) {
2194 cksum_offset
= skb_transport_offset(skb
);
2195 pseudo_hdr_offset
= cksum_offset
+ skb
->csum_offset
;
2196 /* If the headers are excessively large, then we must
2197 * fall back to a software checksum */
2198 if (unlikely(!mss
&& (cksum_offset
> 255 ||
2199 pseudo_hdr_offset
> 127))) {
2200 if (skb_checksum_help(skb
))
2203 pseudo_hdr_offset
= 0;
2205 odd_flag
= MXGEFW_FLAGS_ALIGN_ODD
;
2206 flags
|= MXGEFW_FLAGS_CKSUM
;
2212 if (mss
) { /* TSO */
2213 /* this removes any CKSUM flag from before */
2214 flags
= (MXGEFW_FLAGS_TSO_HDR
| MXGEFW_FLAGS_FIRST
);
2216 /* negative cum_len signifies to the
2217 * send loop that we are still in the
2218 * header portion of the TSO packet.
2219 * TSO header can be at most 1KB long */
2220 cum_len
= -(skb_transport_offset(skb
) + tcp_hdrlen(skb
));
2222 /* for IPv6 TSO, the checksum offset stores the
2223 * TCP header length, to save the firmware from
2224 * the need to parse the headers */
2225 if (skb_is_gso_v6(skb
)) {
2226 cksum_offset
= tcp_hdrlen(skb
);
2227 /* Can only handle headers <= max_tso6 long */
2228 if (unlikely(-cum_len
> mgp
->max_tso6
))
2229 return myri10ge_sw_tso(skb
, dev
);
2231 /* for TSO, pseudo_hdr_offset holds mss.
2232 * The firmware figures out where to put
2233 * the checksum by parsing the header. */
2234 pseudo_hdr_offset
= mss
;
2236 /* Mark small packets, and pad out tiny packets */
2237 if (skb
->len
<= MXGEFW_SEND_SMALL_SIZE
) {
2238 flags
|= MXGEFW_FLAGS_SMALL
;
2240 /* pad frames to at least ETH_ZLEN bytes */
2241 if (unlikely(skb
->len
< ETH_ZLEN
)) {
2242 if (skb_padto(skb
, ETH_ZLEN
)) {
2243 /* The packet is gone, so we must
2245 mgp
->stats
.tx_dropped
+= 1;
2248 /* adjust the len to account for the zero pad
2249 * so that the nic can know how long it is */
2250 skb
->len
= ETH_ZLEN
;
2254 /* map the skb for DMA */
2255 len
= skb
->len
- skb
->data_len
;
2256 idx
= tx
->req
& tx
->mask
;
2257 tx
->info
[idx
].skb
= skb
;
2258 bus
= pci_map_single(mgp
->pdev
, skb
->data
, len
, PCI_DMA_TODEVICE
);
2259 pci_unmap_addr_set(&tx
->info
[idx
], bus
, bus
);
2260 pci_unmap_len_set(&tx
->info
[idx
], len
, len
);
2262 frag_cnt
= skb_shinfo(skb
)->nr_frags
;
2267 /* "rdma_count" is the number of RDMAs belonging to the
2268 * current packet BEFORE the current send request. For
2269 * non-TSO packets, this is equal to "count".
2270 * For TSO packets, rdma_count needs to be reset
2271 * to 0 after a segment cut.
2273 * The rdma_count field of the send request is
2274 * the number of RDMAs of the packet starting at
2275 * that request. For TSO send requests with one ore more cuts
2276 * in the middle, this is the number of RDMAs starting
2277 * after the last cut in the request. All previous
2278 * segments before the last cut implicitly have 1 RDMA.
2280 * Since the number of RDMAs is not known beforehand,
2281 * it must be filled-in retroactively - after each
2282 * segmentation cut or at the end of the entire packet.
2286 /* Break the SKB or Fragment up into pieces which
2287 * do not cross mgp->tx.boundary */
2288 low
= MYRI10GE_LOWPART_TO_U32(bus
);
2289 high_swapped
= htonl(MYRI10GE_HIGHPART_TO_U32(bus
));
2294 if (unlikely(count
== max_segments
))
2295 goto abort_linearize
;
2297 boundary
= (low
+ tx
->boundary
) & ~(tx
->boundary
- 1);
2298 seglen
= boundary
- low
;
2301 flags_next
= flags
& ~MXGEFW_FLAGS_FIRST
;
2302 cum_len_next
= cum_len
+ seglen
;
2303 if (mss
) { /* TSO */
2304 (req
- rdma_count
)->rdma_count
= rdma_count
+ 1;
2306 if (likely(cum_len
>= 0)) { /* payload */
2307 int next_is_first
, chop
;
2309 chop
= (cum_len_next
> mss
);
2310 cum_len_next
= cum_len_next
% mss
;
2311 next_is_first
= (cum_len_next
== 0);
2312 flags
|= chop
* MXGEFW_FLAGS_TSO_CHOP
;
2313 flags_next
|= next_is_first
*
2315 rdma_count
|= -(chop
| next_is_first
);
2316 rdma_count
+= chop
& !next_is_first
;
2317 } else if (likely(cum_len_next
>= 0)) { /* header ends */
2323 small
= (mss
<= MXGEFW_SEND_SMALL_SIZE
);
2324 flags_next
= MXGEFW_FLAGS_TSO_PLD
|
2325 MXGEFW_FLAGS_FIRST
|
2326 (small
* MXGEFW_FLAGS_SMALL
);
2329 req
->addr_high
= high_swapped
;
2330 req
->addr_low
= htonl(low
);
2331 req
->pseudo_hdr_offset
= htons(pseudo_hdr_offset
);
2332 req
->pad
= 0; /* complete solid 16-byte block; does this matter? */
2333 req
->rdma_count
= 1;
2334 req
->length
= htons(seglen
);
2335 req
->cksum_offset
= cksum_offset
;
2336 req
->flags
= flags
| ((cum_len
& 1) * odd_flag
);
2340 cum_len
= cum_len_next
;
2345 if (cksum_offset
!= 0 && !(mss
&& skb_is_gso_v6(skb
))) {
2346 if (unlikely(cksum_offset
> seglen
))
2347 cksum_offset
-= seglen
;
2352 if (frag_idx
== frag_cnt
)
2355 /* map next fragment for DMA */
2356 idx
= (count
+ tx
->req
) & tx
->mask
;
2357 frag
= &skb_shinfo(skb
)->frags
[frag_idx
];
2360 bus
= pci_map_page(mgp
->pdev
, frag
->page
, frag
->page_offset
,
2361 len
, PCI_DMA_TODEVICE
);
2362 pci_unmap_addr_set(&tx
->info
[idx
], bus
, bus
);
2363 pci_unmap_len_set(&tx
->info
[idx
], len
, len
);
2366 (req
- rdma_count
)->rdma_count
= rdma_count
;
2370 req
->flags
|= MXGEFW_FLAGS_TSO_LAST
;
2371 } while (!(req
->flags
& (MXGEFW_FLAGS_TSO_CHOP
|
2372 MXGEFW_FLAGS_FIRST
)));
2373 idx
= ((count
- 1) + tx
->req
) & tx
->mask
;
2374 tx
->info
[idx
].last
= 1;
2375 if (tx
->wc_fifo
== NULL
)
2376 myri10ge_submit_req(tx
, tx
->req_list
, count
);
2378 myri10ge_submit_req_wc(tx
, tx
->req_list
, count
);
2380 if ((avail
- count
) < MXGEFW_MAX_SEND_DESC
) {
2382 netif_stop_queue(dev
);
2384 dev
->trans_start
= jiffies
;
2388 /* Free any DMA resources we've alloced and clear out the skb
2389 * slot so as to not trip up assertions, and to avoid a
2390 * double-free if linearizing fails */
2392 last_idx
= (idx
+ 1) & tx
->mask
;
2393 idx
= tx
->req
& tx
->mask
;
2394 tx
->info
[idx
].skb
= NULL
;
2396 len
= pci_unmap_len(&tx
->info
[idx
], len
);
2398 if (tx
->info
[idx
].skb
!= NULL
)
2399 pci_unmap_single(mgp
->pdev
,
2400 pci_unmap_addr(&tx
->info
[idx
],
2404 pci_unmap_page(mgp
->pdev
,
2405 pci_unmap_addr(&tx
->info
[idx
],
2408 pci_unmap_len_set(&tx
->info
[idx
], len
, 0);
2409 tx
->info
[idx
].skb
= NULL
;
2411 idx
= (idx
+ 1) & tx
->mask
;
2412 } while (idx
!= last_idx
);
2413 if (skb_is_gso(skb
)) {
2415 "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
2420 if (skb_linearize(skb
))
2423 mgp
->tx_linearized
++;
2427 dev_kfree_skb_any(skb
);
2428 mgp
->stats
.tx_dropped
+= 1;
2433 static int myri10ge_sw_tso(struct sk_buff
*skb
, struct net_device
*dev
)
2435 struct sk_buff
*segs
, *curr
;
2436 struct myri10ge_priv
*mgp
= dev
->priv
;
2439 segs
= skb_gso_segment(skb
, dev
->features
& ~NETIF_F_TSO6
);
2447 status
= myri10ge_xmit(curr
, dev
);
2449 dev_kfree_skb_any(curr
);
2454 dev_kfree_skb_any(segs
);
2459 dev_kfree_skb_any(skb
);
2463 dev_kfree_skb_any(skb
);
2464 mgp
->stats
.tx_dropped
+= 1;
2468 static struct net_device_stats
*myri10ge_get_stats(struct net_device
*dev
)
2470 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2474 static void myri10ge_set_multicast_list(struct net_device
*dev
)
2476 struct myri10ge_cmd cmd
;
2477 struct myri10ge_priv
*mgp
;
2478 struct dev_mc_list
*mc_list
;
2479 __be32 data
[2] = { 0, 0 };
2481 DECLARE_MAC_BUF(mac
);
2483 mgp
= netdev_priv(dev
);
2484 /* can be called from atomic contexts,
2485 * pass 1 to force atomicity in myri10ge_send_cmd() */
2486 myri10ge_change_promisc(mgp
, dev
->flags
& IFF_PROMISC
, 1);
2488 /* This firmware is known to not support multicast */
2489 if (!mgp
->fw_multicast_support
)
2492 /* Disable multicast filtering */
2494 err
= myri10ge_send_cmd(mgp
, MXGEFW_ENABLE_ALLMULTI
, &cmd
, 1);
2496 printk(KERN_ERR
"myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
2497 " error status: %d\n", dev
->name
, err
);
2501 if ((dev
->flags
& IFF_ALLMULTI
) || mgp
->adopted_rx_filter_bug
) {
2502 /* request to disable multicast filtering, so quit here */
2506 /* Flush the filters */
2508 err
= myri10ge_send_cmd(mgp
, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS
,
2512 "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
2513 ", error status: %d\n", dev
->name
, err
);
2517 /* Walk the multicast list, and add each address */
2518 for (mc_list
= dev
->mc_list
; mc_list
!= NULL
; mc_list
= mc_list
->next
) {
2519 memcpy(data
, &mc_list
->dmi_addr
, 6);
2520 cmd
.data0
= ntohl(data
[0]);
2521 cmd
.data1
= ntohl(data
[1]);
2522 err
= myri10ge_send_cmd(mgp
, MXGEFW_JOIN_MULTICAST_GROUP
,
2526 printk(KERN_ERR
"myri10ge: %s: Failed "
2527 "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
2528 "%d\t", dev
->name
, err
);
2529 printk(KERN_ERR
"MAC %s\n",
2530 print_mac(mac
, mc_list
->dmi_addr
));
2534 /* Enable multicast filtering */
2535 err
= myri10ge_send_cmd(mgp
, MXGEFW_DISABLE_ALLMULTI
, &cmd
, 1);
2537 printk(KERN_ERR
"myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
2538 "error status: %d\n", dev
->name
, err
);
2548 static int myri10ge_set_mac_address(struct net_device
*dev
, void *addr
)
2550 struct sockaddr
*sa
= addr
;
2551 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2554 if (!is_valid_ether_addr(sa
->sa_data
))
2555 return -EADDRNOTAVAIL
;
2557 status
= myri10ge_update_mac_address(mgp
, sa
->sa_data
);
2560 "myri10ge: %s: changing mac address failed with %d\n",
2565 /* change the dev structure */
2566 memcpy(dev
->dev_addr
, sa
->sa_data
, 6);
2570 static int myri10ge_change_mtu(struct net_device
*dev
, int new_mtu
)
2572 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2575 if ((new_mtu
< 68) || (ETH_HLEN
+ new_mtu
> MYRI10GE_MAX_ETHER_MTU
)) {
2576 printk(KERN_ERR
"myri10ge: %s: new mtu (%d) is not valid\n",
2577 dev
->name
, new_mtu
);
2580 printk(KERN_INFO
"%s: changing mtu from %d to %d\n",
2581 dev
->name
, dev
->mtu
, new_mtu
);
2583 /* if we change the mtu on an active device, we must
2584 * reset the device so the firmware sees the change */
2585 myri10ge_close(dev
);
2595 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
2596 * Only do it if the bridge is a root port since we don't want to disturb
2597 * any other device, except if forced with myri10ge_ecrc_enable > 1.
2600 static void myri10ge_enable_ecrc(struct myri10ge_priv
*mgp
)
2602 struct pci_dev
*bridge
= mgp
->pdev
->bus
->self
;
2603 struct device
*dev
= &mgp
->pdev
->dev
;
2610 if (!myri10ge_ecrc_enable
|| !bridge
)
2613 /* check that the bridge is a root port */
2614 cap
= pci_find_capability(bridge
, PCI_CAP_ID_EXP
);
2615 pci_read_config_word(bridge
, cap
+ PCI_CAP_FLAGS
, &val
);
2616 ext_type
= (val
& PCI_EXP_FLAGS_TYPE
) >> 4;
2617 if (ext_type
!= PCI_EXP_TYPE_ROOT_PORT
) {
2618 if (myri10ge_ecrc_enable
> 1) {
2619 struct pci_dev
*old_bridge
= bridge
;
2621 /* Walk the hierarchy up to the root port
2622 * where ECRC has to be enabled */
2624 bridge
= bridge
->bus
->self
;
2627 "Failed to find root port"
2628 " to force ECRC\n");
2632 pci_find_capability(bridge
, PCI_CAP_ID_EXP
);
2633 pci_read_config_word(bridge
,
2634 cap
+ PCI_CAP_FLAGS
, &val
);
2635 ext_type
= (val
& PCI_EXP_FLAGS_TYPE
) >> 4;
2636 } while (ext_type
!= PCI_EXP_TYPE_ROOT_PORT
);
2639 "Forcing ECRC on non-root port %s"
2640 " (enabling on root port %s)\n",
2641 pci_name(old_bridge
), pci_name(bridge
));
2644 "Not enabling ECRC on non-root port %s\n",
2650 cap
= pci_find_ext_capability(bridge
, PCI_EXT_CAP_ID_ERR
);
2654 ret
= pci_read_config_dword(bridge
, cap
+ PCI_ERR_CAP
, &err_cap
);
2656 dev_err(dev
, "failed reading ext-conf-space of %s\n",
2658 dev_err(dev
, "\t pci=nommconf in use? "
2659 "or buggy/incomplete/absent ACPI MCFG attr?\n");
2662 if (!(err_cap
& PCI_ERR_CAP_ECRC_GENC
))
2665 err_cap
|= PCI_ERR_CAP_ECRC_GENE
;
2666 pci_write_config_dword(bridge
, cap
+ PCI_ERR_CAP
, err_cap
);
2667 dev_info(dev
, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge
));
2671 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
2672 * when the PCI-E Completion packets are aligned on an 8-byte
2673 * boundary. Some PCI-E chip sets always align Completion packets; on
2674 * the ones that do not, the alignment can be enforced by enabling
2675 * ECRC generation (if supported).
2677 * When PCI-E Completion packets are not aligned, it is actually more
2678 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
2680 * If the driver can neither enable ECRC nor verify that it has
2681 * already been enabled, then it must use a firmware image which works
2682 * around unaligned completion packets (myri10ge_ethp_z8e.dat), and it
2683 * should also ensure that it never gives the device a Read-DMA which is
2684 * larger than 2KB by setting the tx.boundary to 2KB. If ECRC is
2685 * enabled, then the driver should use the aligned (myri10ge_eth_z8e.dat)
2686 * firmware image, and set tx.boundary to 4KB.
2689 static void myri10ge_firmware_probe(struct myri10ge_priv
*mgp
)
2691 struct pci_dev
*pdev
= mgp
->pdev
;
2692 struct device
*dev
= &pdev
->dev
;
2695 mgp
->tx
.boundary
= 4096;
2697 * Verify the max read request size was set to 4KB
2698 * before trying the test with 4KB.
2700 status
= pcie_get_readrq(pdev
);
2702 dev_err(dev
, "Couldn't read max read req size: %d\n", status
);
2705 if (status
!= 4096) {
2706 dev_warn(dev
, "Max Read Request size != 4096 (%d)\n", status
);
2707 mgp
->tx
.boundary
= 2048;
2710 * load the optimized firmware (which assumes aligned PCIe
2711 * completions) in order to see if it works on this host.
2713 mgp
->fw_name
= myri10ge_fw_aligned
;
2714 status
= myri10ge_load_firmware(mgp
);
2720 * Enable ECRC if possible
2722 myri10ge_enable_ecrc(mgp
);
2725 * Run a DMA test which watches for unaligned completions and
2726 * aborts on the first one seen.
2729 status
= myri10ge_dma_test(mgp
, MXGEFW_CMD_UNALIGNED_TEST
);
2731 return; /* keep the aligned firmware */
2733 if (status
!= -E2BIG
)
2734 dev_warn(dev
, "DMA test failed: %d\n", status
);
2735 if (status
== -ENOSYS
)
2736 dev_warn(dev
, "Falling back to ethp! "
2737 "Please install up to date fw\n");
2739 /* fall back to using the unaligned firmware */
2740 mgp
->tx
.boundary
= 2048;
2741 mgp
->fw_name
= myri10ge_fw_unaligned
;
2745 static void myri10ge_select_firmware(struct myri10ge_priv
*mgp
)
2747 if (myri10ge_force_firmware
== 0) {
2748 int link_width
, exp_cap
;
2751 exp_cap
= pci_find_capability(mgp
->pdev
, PCI_CAP_ID_EXP
);
2752 pci_read_config_word(mgp
->pdev
, exp_cap
+ PCI_EXP_LNKSTA
, &lnk
);
2753 link_width
= (lnk
>> 4) & 0x3f;
2755 /* Check to see if Link is less than 8 or if the
2756 * upstream bridge is known to provide aligned
2758 if (link_width
< 8) {
2759 dev_info(&mgp
->pdev
->dev
, "PCIE x%d Link\n",
2761 mgp
->tx
.boundary
= 4096;
2762 mgp
->fw_name
= myri10ge_fw_aligned
;
2764 myri10ge_firmware_probe(mgp
);
2767 if (myri10ge_force_firmware
== 1) {
2768 dev_info(&mgp
->pdev
->dev
,
2769 "Assuming aligned completions (forced)\n");
2770 mgp
->tx
.boundary
= 4096;
2771 mgp
->fw_name
= myri10ge_fw_aligned
;
2773 dev_info(&mgp
->pdev
->dev
,
2774 "Assuming unaligned completions (forced)\n");
2775 mgp
->tx
.boundary
= 2048;
2776 mgp
->fw_name
= myri10ge_fw_unaligned
;
2779 if (myri10ge_fw_name
!= NULL
) {
2780 dev_info(&mgp
->pdev
->dev
, "overriding firmware to %s\n",
2782 mgp
->fw_name
= myri10ge_fw_name
;
2787 static int myri10ge_suspend(struct pci_dev
*pdev
, pm_message_t state
)
2789 struct myri10ge_priv
*mgp
;
2790 struct net_device
*netdev
;
2792 mgp
= pci_get_drvdata(pdev
);
2797 netif_device_detach(netdev
);
2798 if (netif_running(netdev
)) {
2799 printk(KERN_INFO
"myri10ge: closing %s\n", netdev
->name
);
2801 myri10ge_close(netdev
);
2804 myri10ge_dummy_rdma(mgp
, 0);
2805 pci_save_state(pdev
);
2806 pci_disable_device(pdev
);
2808 return pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
2811 static int myri10ge_resume(struct pci_dev
*pdev
)
2813 struct myri10ge_priv
*mgp
;
2814 struct net_device
*netdev
;
2818 mgp
= pci_get_drvdata(pdev
);
2822 pci_set_power_state(pdev
, 0); /* zeros conf space as a side effect */
2823 msleep(5); /* give card time to respond */
2824 pci_read_config_word(mgp
->pdev
, PCI_VENDOR_ID
, &vendor
);
2825 if (vendor
== 0xffff) {
2826 printk(KERN_ERR
"myri10ge: %s: device disappeared!\n",
2831 status
= pci_restore_state(pdev
);
2835 status
= pci_enable_device(pdev
);
2837 dev_err(&pdev
->dev
, "failed to enable device\n");
2841 pci_set_master(pdev
);
2843 myri10ge_reset(mgp
);
2844 myri10ge_dummy_rdma(mgp
, 1);
2846 /* Save configuration space to be restored if the
2847 * nic resets due to a parity error */
2848 pci_save_state(pdev
);
2850 if (netif_running(netdev
)) {
2852 status
= myri10ge_open(netdev
);
2855 goto abort_with_enabled
;
2858 netif_device_attach(netdev
);
2863 pci_disable_device(pdev
);
2867 #endif /* CONFIG_PM */
2869 static u32
myri10ge_read_reboot(struct myri10ge_priv
*mgp
)
2871 struct pci_dev
*pdev
= mgp
->pdev
;
2872 int vs
= mgp
->vendor_specific_offset
;
2875 /*enter read32 mode */
2876 pci_write_config_byte(pdev
, vs
+ 0x10, 0x3);
2878 /*read REBOOT_STATUS (0xfffffff0) */
2879 pci_write_config_dword(pdev
, vs
+ 0x18, 0xfffffff0);
2880 pci_read_config_dword(pdev
, vs
+ 0x14, &reboot
);
2885 * This watchdog is used to check whether the board has suffered
2886 * from a parity error and needs to be recovered.
2888 static void myri10ge_watchdog(struct work_struct
*work
)
2890 struct myri10ge_priv
*mgp
=
2891 container_of(work
, struct myri10ge_priv
, watchdog_work
);
2896 mgp
->watchdog_resets
++;
2897 pci_read_config_word(mgp
->pdev
, PCI_COMMAND
, &cmd
);
2898 if ((cmd
& PCI_COMMAND_MASTER
) == 0) {
2899 /* Bus master DMA disabled? Check to see
2900 * if the card rebooted due to a parity error
2901 * For now, just report it */
2902 reboot
= myri10ge_read_reboot(mgp
);
2904 "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
2905 mgp
->dev
->name
, reboot
,
2906 myri10ge_reset_recover
? " " : " not");
2907 if (myri10ge_reset_recover
== 0)
2910 myri10ge_reset_recover
--;
2913 * A rebooted nic will come back with config space as
2914 * it was after power was applied to PCIe bus.
2915 * Attempt to restore config space which was saved
2916 * when the driver was loaded, or the last time the
2917 * nic was resumed from power saving mode.
2919 pci_restore_state(mgp
->pdev
);
2921 /* save state again for accounting reasons */
2922 pci_save_state(mgp
->pdev
);
2925 /* if we get back -1's from our slot, perhaps somebody
2926 * powered off our card. Don't try to reset it in
2928 if (cmd
== 0xffff) {
2929 pci_read_config_word(mgp
->pdev
, PCI_VENDOR_ID
, &vendor
);
2930 if (vendor
== 0xffff) {
2932 "myri10ge: %s: device disappeared!\n",
2937 /* Perhaps it is a software error. Try to reset */
2939 printk(KERN_ERR
"myri10ge: %s: device timeout, resetting\n",
2941 printk(KERN_INFO
"myri10ge: %s: %d %d %d %d %d\n",
2942 mgp
->dev
->name
, mgp
->tx
.req
, mgp
->tx
.done
,
2943 mgp
->tx
.pkt_start
, mgp
->tx
.pkt_done
,
2944 (int)ntohl(mgp
->fw_stats
->send_done_count
));
2946 printk(KERN_INFO
"myri10ge: %s: %d %d %d %d %d\n",
2947 mgp
->dev
->name
, mgp
->tx
.req
, mgp
->tx
.done
,
2948 mgp
->tx
.pkt_start
, mgp
->tx
.pkt_done
,
2949 (int)ntohl(mgp
->fw_stats
->send_done_count
));
2952 myri10ge_close(mgp
->dev
);
2953 status
= myri10ge_load_firmware(mgp
);
2955 printk(KERN_ERR
"myri10ge: %s: failed to load firmware\n",
2958 myri10ge_open(mgp
->dev
);
2963 * We use our own timer routine rather than relying upon
2964 * netdev->tx_timeout because we have a very large hardware transmit
2965 * queue. Due to the large queue, the netdev->tx_timeout function
2966 * cannot detect a NIC with a parity error in a timely fashion if the
2967 * NIC is lightly loaded.
2969 static void myri10ge_watchdog_timer(unsigned long arg
)
2971 struct myri10ge_priv
*mgp
;
2974 mgp
= (struct myri10ge_priv
*)arg
;
2976 if (mgp
->rx_small
.watchdog_needed
) {
2977 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_small
,
2978 mgp
->small_bytes
+ MXGEFW_PAD
, 1);
2979 if (mgp
->rx_small
.fill_cnt
- mgp
->rx_small
.cnt
>=
2980 myri10ge_fill_thresh
)
2981 mgp
->rx_small
.watchdog_needed
= 0;
2983 if (mgp
->rx_big
.watchdog_needed
) {
2984 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_big
, mgp
->big_bytes
, 1);
2985 if (mgp
->rx_big
.fill_cnt
- mgp
->rx_big
.cnt
>=
2986 myri10ge_fill_thresh
)
2987 mgp
->rx_big
.watchdog_needed
= 0;
2989 rx_pause_cnt
= ntohl(mgp
->fw_stats
->dropped_pause
);
2991 if (mgp
->tx
.req
!= mgp
->tx
.done
&&
2992 mgp
->tx
.done
== mgp
->watchdog_tx_done
&&
2993 mgp
->watchdog_tx_req
!= mgp
->watchdog_tx_done
) {
2994 /* nic seems like it might be stuck.. */
2995 if (rx_pause_cnt
!= mgp
->watchdog_pause
) {
2996 if (net_ratelimit())
2997 printk(KERN_WARNING
"myri10ge %s:"
2998 "TX paused, check link partner\n",
3001 schedule_work(&mgp
->watchdog_work
);
3006 mod_timer(&mgp
->watchdog_timer
,
3007 jiffies
+ myri10ge_watchdog_timeout
* HZ
);
3008 mgp
->watchdog_tx_done
= mgp
->tx
.done
;
3009 mgp
->watchdog_tx_req
= mgp
->tx
.req
;
3010 mgp
->watchdog_pause
= rx_pause_cnt
;
3013 static int myri10ge_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
3015 struct net_device
*netdev
;
3016 struct myri10ge_priv
*mgp
;
3017 struct device
*dev
= &pdev
->dev
;
3020 int status
= -ENXIO
;
3023 netdev
= alloc_etherdev(sizeof(*mgp
));
3024 if (netdev
== NULL
) {
3025 dev_err(dev
, "Could not allocate ethernet device\n");
3029 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
3031 mgp
= netdev_priv(netdev
);
3033 netif_napi_add(netdev
, &mgp
->napi
, myri10ge_poll
, myri10ge_napi_weight
);
3035 mgp
->csum_flag
= MXGEFW_FLAGS_CKSUM
;
3036 mgp
->pause
= myri10ge_flow_control
;
3037 mgp
->intr_coal_delay
= myri10ge_intr_coal_delay
;
3038 mgp
->msg_enable
= netif_msg_init(myri10ge_debug
, MYRI10GE_MSG_DEFAULT
);
3039 init_waitqueue_head(&mgp
->down_wq
);
3041 if (pci_enable_device(pdev
)) {
3042 dev_err(&pdev
->dev
, "pci_enable_device call failed\n");
3044 goto abort_with_netdev
;
3047 /* Find the vendor-specific cap so we can check
3048 * the reboot register later on */
3049 mgp
->vendor_specific_offset
3050 = pci_find_capability(pdev
, PCI_CAP_ID_VNDR
);
3052 /* Set our max read request to 4KB */
3053 status
= pcie_set_readrq(pdev
, 4096);
3055 dev_err(&pdev
->dev
, "Error %d writing PCI_EXP_DEVCTL\n",
3057 goto abort_with_netdev
;
3060 pci_set_master(pdev
);
3062 status
= pci_set_dma_mask(pdev
, DMA_64BIT_MASK
);
3066 "64-bit pci address mask was refused, "
3068 status
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
3071 dev_err(&pdev
->dev
, "Error %d setting DMA mask\n", status
);
3072 goto abort_with_netdev
;
3074 mgp
->cmd
= dma_alloc_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3075 &mgp
->cmd_bus
, GFP_KERNEL
);
3076 if (mgp
->cmd
== NULL
)
3077 goto abort_with_netdev
;
3079 mgp
->fw_stats
= dma_alloc_coherent(&pdev
->dev
, sizeof(*mgp
->fw_stats
),
3080 &mgp
->fw_stats_bus
, GFP_KERNEL
);
3081 if (mgp
->fw_stats
== NULL
)
3082 goto abort_with_cmd
;
3084 mgp
->board_span
= pci_resource_len(pdev
, 0);
3085 mgp
->iomem_base
= pci_resource_start(pdev
, 0);
3087 mgp
->wc_enabled
= 0;
3089 mgp
->mtrr
= mtrr_add(mgp
->iomem_base
, mgp
->board_span
,
3090 MTRR_TYPE_WRCOMB
, 1);
3092 mgp
->wc_enabled
= 1;
3094 /* Hack. need to get rid of these magic numbers */
3096 2 * 1024 * 1024 - (2 * (48 * 1024) + (32 * 1024)) - 0x100;
3097 if (mgp
->sram_size
> mgp
->board_span
) {
3098 dev_err(&pdev
->dev
, "board span %ld bytes too small\n",
3102 mgp
->sram
= ioremap(mgp
->iomem_base
, mgp
->board_span
);
3103 if (mgp
->sram
== NULL
) {
3104 dev_err(&pdev
->dev
, "ioremap failed for %ld bytes at 0x%lx\n",
3105 mgp
->board_span
, mgp
->iomem_base
);
3109 memcpy_fromio(mgp
->eeprom_strings
,
3110 mgp
->sram
+ mgp
->sram_size
- MYRI10GE_EEPROM_STRINGS_SIZE
,
3111 MYRI10GE_EEPROM_STRINGS_SIZE
);
3112 memset(mgp
->eeprom_strings
+ MYRI10GE_EEPROM_STRINGS_SIZE
- 2, 0, 2);
3113 status
= myri10ge_read_mac_addr(mgp
);
3115 goto abort_with_ioremap
;
3117 for (i
= 0; i
< ETH_ALEN
; i
++)
3118 netdev
->dev_addr
[i
] = mgp
->mac_addr
[i
];
3120 /* allocate rx done ring */
3121 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
3122 mgp
->rx_done
.entry
= dma_alloc_coherent(&pdev
->dev
, bytes
,
3123 &mgp
->rx_done
.bus
, GFP_KERNEL
);
3124 if (mgp
->rx_done
.entry
== NULL
)
3125 goto abort_with_ioremap
;
3126 memset(mgp
->rx_done
.entry
, 0, bytes
);
3128 myri10ge_select_firmware(mgp
);
3130 status
= myri10ge_load_firmware(mgp
);
3132 dev_err(&pdev
->dev
, "failed to load firmware\n");
3133 goto abort_with_rx_done
;
3136 status
= myri10ge_reset(mgp
);
3138 dev_err(&pdev
->dev
, "failed reset\n");
3139 goto abort_with_firmware
;
3142 pci_set_drvdata(pdev
, mgp
);
3143 if ((myri10ge_initial_mtu
+ ETH_HLEN
) > MYRI10GE_MAX_ETHER_MTU
)
3144 myri10ge_initial_mtu
= MYRI10GE_MAX_ETHER_MTU
- ETH_HLEN
;
3145 if ((myri10ge_initial_mtu
+ ETH_HLEN
) < 68)
3146 myri10ge_initial_mtu
= 68;
3147 netdev
->mtu
= myri10ge_initial_mtu
;
3148 netdev
->open
= myri10ge_open
;
3149 netdev
->stop
= myri10ge_close
;
3150 netdev
->hard_start_xmit
= myri10ge_xmit
;
3151 netdev
->get_stats
= myri10ge_get_stats
;
3152 netdev
->base_addr
= mgp
->iomem_base
;
3153 netdev
->change_mtu
= myri10ge_change_mtu
;
3154 netdev
->set_multicast_list
= myri10ge_set_multicast_list
;
3155 netdev
->set_mac_address
= myri10ge_set_mac_address
;
3156 netdev
->features
= mgp
->features
;
3158 netdev
->features
|= NETIF_F_HIGHDMA
;
3160 /* make sure we can get an irq, and that MSI can be
3161 * setup (if available). Also ensure netdev->irq
3162 * is set to correct value if MSI is enabled */
3163 status
= myri10ge_request_irq(mgp
);
3165 goto abort_with_firmware
;
3166 netdev
->irq
= pdev
->irq
;
3167 myri10ge_free_irq(mgp
);
3169 /* Save configuration space to be restored if the
3170 * nic resets due to a parity error */
3171 pci_save_state(pdev
);
3173 /* Setup the watchdog timer */
3174 setup_timer(&mgp
->watchdog_timer
, myri10ge_watchdog_timer
,
3175 (unsigned long)mgp
);
3177 SET_ETHTOOL_OPS(netdev
, &myri10ge_ethtool_ops
);
3178 INIT_WORK(&mgp
->watchdog_work
, myri10ge_watchdog
);
3179 status
= register_netdev(netdev
);
3181 dev_err(&pdev
->dev
, "register_netdev failed: %d\n", status
);
3182 goto abort_with_state
;
3184 dev_info(dev
, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3185 (mgp
->msi_enabled
? "MSI" : "xPIC"),
3186 netdev
->irq
, mgp
->tx
.boundary
, mgp
->fw_name
,
3187 (mgp
->wc_enabled
? "Enabled" : "Disabled"));
3192 pci_restore_state(pdev
);
3194 abort_with_firmware
:
3195 myri10ge_dummy_rdma(mgp
, 0);
3198 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
3199 dma_free_coherent(&pdev
->dev
, bytes
,
3200 mgp
->rx_done
.entry
, mgp
->rx_done
.bus
);
3208 mtrr_del(mgp
->mtrr
, mgp
->iomem_base
, mgp
->board_span
);
3210 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->fw_stats
),
3211 mgp
->fw_stats
, mgp
->fw_stats_bus
);
3214 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3215 mgp
->cmd
, mgp
->cmd_bus
);
3219 free_netdev(netdev
);
3226 * Does what is necessary to shutdown one Myrinet device. Called
3227 * once for each Myrinet card by the kernel when a module is
3230 static void myri10ge_remove(struct pci_dev
*pdev
)
3232 struct myri10ge_priv
*mgp
;
3233 struct net_device
*netdev
;
3236 mgp
= pci_get_drvdata(pdev
);
3240 flush_scheduled_work();
3242 unregister_netdev(netdev
);
3244 myri10ge_dummy_rdma(mgp
, 0);
3246 /* avoid a memory leak */
3247 pci_restore_state(pdev
);
3249 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
3250 dma_free_coherent(&pdev
->dev
, bytes
,
3251 mgp
->rx_done
.entry
, mgp
->rx_done
.bus
);
3257 mtrr_del(mgp
->mtrr
, mgp
->iomem_base
, mgp
->board_span
);
3259 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->fw_stats
),
3260 mgp
->fw_stats
, mgp
->fw_stats_bus
);
3262 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3263 mgp
->cmd
, mgp
->cmd_bus
);
3265 free_netdev(netdev
);
3266 pci_set_drvdata(pdev
, NULL
);
3269 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
3270 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
3272 static struct pci_device_id myri10ge_pci_tbl
[] = {
3273 {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM
, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E
)},
3275 (PCI_VENDOR_ID_MYRICOM
, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9
)},
3279 static struct pci_driver myri10ge_driver
= {
3281 .probe
= myri10ge_probe
,
3282 .remove
= myri10ge_remove
,
3283 .id_table
= myri10ge_pci_tbl
,
3285 .suspend
= myri10ge_suspend
,
3286 .resume
= myri10ge_resume
,
3290 static __init
int myri10ge_init_module(void)
3292 printk(KERN_INFO
"%s: Version %s\n", myri10ge_driver
.name
,
3293 MYRI10GE_VERSION_STR
);
3294 return pci_register_driver(&myri10ge_driver
);
3297 module_init(myri10ge_init_module
);
3299 static __exit
void myri10ge_cleanup_module(void)
3301 pci_unregister_driver(&myri10ge_driver
);
3304 module_exit(myri10ge_cleanup_module
);