1 /* ------------------------------------------------------------
3 * (C) Copyright IBM Corporation 1994, 2004
4 * Authors: Colin DeVilbiss (devilbis@us.ibm.com)
5 * Santiago Leon (santil@us.ibm.com)
6 * Dave Boutcher (sleddog@us.ibm.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
23 * ------------------------------------------------------------
24 * Emulation of a SCSI host adapter for Virtual I/O devices
26 * This driver supports the SCSI adapter implemented by the IBM
27 * Power5 firmware. That SCSI adapter is not a physical adapter,
28 * but allows Linux SCSI peripheral drivers to directly
29 * access devices in another logical partition on the physical system.
31 * The virtual adapter(s) are present in the open firmware device
32 * tree just like real adapters.
34 * One of the capabilities provided on these systems is the ability
35 * to DMA between partitions. The architecture states that for VSCSI,
36 * the server side is allowed to DMA to and from the client. The client
37 * is never trusted to DMA to or from the server directly.
39 * Messages are sent between partitions on a "Command/Response Queue"
40 * (CRQ), which is just a buffer of 16 byte entries in the receiver's
41 * Senders cannot access the buffer directly, but send messages by
42 * making a hypervisor call and passing in the 16 bytes. The hypervisor
43 * puts the message in the next 16 byte space in round-robbin fashion,
44 * turns on the high order bit of the message (the valid bit), and
45 * generates an interrupt to the receiver (if interrupts are turned on.)
46 * The receiver just turns off the valid bit when they have copied out
49 * The VSCSI client builds a SCSI Remote Protocol (SRP) Information Unit
50 * (IU) (as defined in the T10 standard available at www.t10.org), gets
51 * a DMA address for the message, and sends it to the server as the
52 * payload of a CRQ message. The server DMAs the SRP IU and processes it,
53 * including doing any additional data transfers. When it is done, it
54 * DMAs the SRP response back to the same address as the request came from,
55 * and sends a CRQ message back to inform the client that the request has
58 * Note that some of the underlying infrastructure is different between
59 * machines conforming to the "RS/6000 Platform Architecture" (RPA) and
60 * the older iSeries hypervisor models. To support both, some low level
61 * routines have been broken out into rpa_vscsi.c and iseries_vscsi.c.
62 * The Makefile should pick one, not two, not zero, of these.
64 * TODO: This is currently pretty tied to the IBM i/pSeries hypervisor
65 * interfaces. It would be really nice to abstract this above an RDMA
69 #include <linux/module.h>
70 #include <linux/moduleparam.h>
71 #include <linux/dma-mapping.h>
72 #include <linux/delay.h>
73 #include <asm/firmware.h>
75 #include <scsi/scsi.h>
76 #include <scsi/scsi_cmnd.h>
77 #include <scsi/scsi_host.h>
78 #include <scsi/scsi_device.h>
79 #include <scsi/scsi_transport_srp.h>
82 /* The values below are somewhat arbitrary default values, but
83 * OS/400 will use 3 busses (disks, CDs, tapes, I think.)
84 * Note that there are 3 bits of channel value, 6 bits of id, and
87 static int max_id
= 64;
88 static int max_channel
= 3;
89 static int init_timeout
= 5;
90 static int max_requests
= IBMVSCSI_MAX_REQUESTS_DEFAULT
;
92 static struct scsi_transport_template
*ibmvscsi_transport_template
;
94 #define IBMVSCSI_VERSION "1.5.8"
96 static struct ibmvscsi_ops
*ibmvscsi_ops
;
98 MODULE_DESCRIPTION("IBM Virtual SCSI");
99 MODULE_AUTHOR("Dave Boutcher");
100 MODULE_LICENSE("GPL");
101 MODULE_VERSION(IBMVSCSI_VERSION
);
103 module_param_named(max_id
, max_id
, int, S_IRUGO
| S_IWUSR
);
104 MODULE_PARM_DESC(max_id
, "Largest ID value for each channel");
105 module_param_named(max_channel
, max_channel
, int, S_IRUGO
| S_IWUSR
);
106 MODULE_PARM_DESC(max_channel
, "Largest channel value");
107 module_param_named(init_timeout
, init_timeout
, int, S_IRUGO
| S_IWUSR
);
108 MODULE_PARM_DESC(init_timeout
, "Initialization timeout in seconds");
109 module_param_named(max_requests
, max_requests
, int, S_IRUGO
| S_IWUSR
);
110 MODULE_PARM_DESC(max_requests
, "Maximum requests for this adapter");
112 /* ------------------------------------------------------------
113 * Routines for the event pool and event structs
116 * initialize_event_pool: - Allocates and initializes the event pool for a host
117 * @pool: event_pool to be initialized
118 * @size: Number of events in pool
119 * @hostdata: ibmvscsi_host_data who owns the event pool
121 * Returns zero on success.
123 static int initialize_event_pool(struct event_pool
*pool
,
124 int size
, struct ibmvscsi_host_data
*hostdata
)
130 pool
->events
= kcalloc(pool
->size
, sizeof(*pool
->events
), GFP_KERNEL
);
135 dma_alloc_coherent(hostdata
->dev
,
136 pool
->size
* sizeof(*pool
->iu_storage
),
138 if (!pool
->iu_storage
) {
143 for (i
= 0; i
< pool
->size
; ++i
) {
144 struct srp_event_struct
*evt
= &pool
->events
[i
];
145 memset(&evt
->crq
, 0x00, sizeof(evt
->crq
));
146 atomic_set(&evt
->free
, 1);
147 evt
->crq
.valid
= 0x80;
148 evt
->crq
.IU_length
= sizeof(*evt
->xfer_iu
);
149 evt
->crq
.IU_data_ptr
= pool
->iu_token
+
150 sizeof(*evt
->xfer_iu
) * i
;
151 evt
->xfer_iu
= pool
->iu_storage
+ i
;
152 evt
->hostdata
= hostdata
;
153 evt
->ext_list
= NULL
;
154 evt
->ext_list_token
= 0;
161 * release_event_pool: - Frees memory of an event pool of a host
162 * @pool: event_pool to be released
163 * @hostdata: ibmvscsi_host_data who owns the even pool
165 * Returns zero on success.
167 static void release_event_pool(struct event_pool
*pool
,
168 struct ibmvscsi_host_data
*hostdata
)
171 for (i
= 0; i
< pool
->size
; ++i
) {
172 if (atomic_read(&pool
->events
[i
].free
) != 1)
174 if (pool
->events
[i
].ext_list
) {
175 dma_free_coherent(hostdata
->dev
,
176 SG_ALL
* sizeof(struct srp_direct_buf
),
177 pool
->events
[i
].ext_list
,
178 pool
->events
[i
].ext_list_token
);
182 dev_warn(hostdata
->dev
, "releasing event pool with %d "
183 "events still in use?\n", in_use
);
185 dma_free_coherent(hostdata
->dev
,
186 pool
->size
* sizeof(*pool
->iu_storage
),
187 pool
->iu_storage
, pool
->iu_token
);
191 * valid_event_struct: - Determines if event is valid.
192 * @pool: event_pool that contains the event
193 * @evt: srp_event_struct to be checked for validity
195 * Returns zero if event is invalid, one otherwise.
197 static int valid_event_struct(struct event_pool
*pool
,
198 struct srp_event_struct
*evt
)
200 int index
= evt
- pool
->events
;
201 if (index
< 0 || index
>= pool
->size
) /* outside of bounds */
203 if (evt
!= pool
->events
+ index
) /* unaligned */
209 * ibmvscsi_free-event_struct: - Changes status of event to "free"
210 * @pool: event_pool that contains the event
211 * @evt: srp_event_struct to be modified
214 static void free_event_struct(struct event_pool
*pool
,
215 struct srp_event_struct
*evt
)
217 if (!valid_event_struct(pool
, evt
)) {
218 dev_err(evt
->hostdata
->dev
, "Freeing invalid event_struct %p "
219 "(not in pool %p)\n", evt
, pool
->events
);
222 if (atomic_inc_return(&evt
->free
) != 1) {
223 dev_err(evt
->hostdata
->dev
, "Freeing event_struct %p "
224 "which is not in use!\n", evt
);
230 * get_evt_struct: - Gets the next free event in pool
231 * @pool: event_pool that contains the events to be searched
233 * Returns the next event in "free" state, and NULL if none are free.
234 * Note that no synchronization is done here, we assume the host_lock
235 * will syncrhonze things.
237 static struct srp_event_struct
*get_event_struct(struct event_pool
*pool
)
240 int poolsize
= pool
->size
;
241 int offset
= pool
->next
;
243 for (i
= 0; i
< poolsize
; i
++) {
244 offset
= (offset
+ 1) % poolsize
;
245 if (!atomic_dec_if_positive(&pool
->events
[offset
].free
)) {
247 return &pool
->events
[offset
];
251 printk(KERN_ERR
"ibmvscsi: found no event struct in pool!\n");
256 * init_event_struct: Initialize fields in an event struct that are always
259 * @done: Routine to call when the event is responded to
260 * @format: SRP or MAD format
261 * @timeout: timeout value set in the CRQ
263 static void init_event_struct(struct srp_event_struct
*evt_struct
,
264 void (*done
) (struct srp_event_struct
*),
268 evt_struct
->cmnd
= NULL
;
269 evt_struct
->cmnd_done
= NULL
;
270 evt_struct
->sync_srp
= NULL
;
271 evt_struct
->crq
.format
= format
;
272 evt_struct
->crq
.timeout
= timeout
;
273 evt_struct
->done
= done
;
276 /* ------------------------------------------------------------
277 * Routines for receiving SCSI responses from the hosting partition
281 * set_srp_direction: Set the fields in the srp related to data
282 * direction and number of buffers based on the direction in
283 * the scsi_cmnd and the number of buffers
285 static void set_srp_direction(struct scsi_cmnd
*cmd
,
286 struct srp_cmd
*srp_cmd
,
295 fmt
= SRP_DATA_DESC_DIRECT
;
297 fmt
= SRP_DATA_DESC_INDIRECT
;
298 numbuf
= min(numbuf
, MAX_INDIRECT_BUFS
);
300 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
301 srp_cmd
->data_out_desc_cnt
= numbuf
;
303 srp_cmd
->data_in_desc_cnt
= numbuf
;
306 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
307 srp_cmd
->buf_fmt
= fmt
<< 4;
309 srp_cmd
->buf_fmt
= fmt
;
312 static void unmap_sg_list(int num_entries
,
314 struct srp_direct_buf
*md
)
318 for (i
= 0; i
< num_entries
; ++i
)
319 dma_unmap_single(dev
, md
[i
].va
, md
[i
].len
, DMA_BIDIRECTIONAL
);
323 * unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
324 * @cmd: srp_cmd whose additional_data member will be unmapped
325 * @dev: device for which the memory is mapped
328 static void unmap_cmd_data(struct srp_cmd
*cmd
,
329 struct srp_event_struct
*evt_struct
,
334 out_fmt
= cmd
->buf_fmt
>> 4;
335 in_fmt
= cmd
->buf_fmt
& ((1U << 4) - 1);
337 if (out_fmt
== SRP_NO_DATA_DESC
&& in_fmt
== SRP_NO_DATA_DESC
)
339 else if (out_fmt
== SRP_DATA_DESC_DIRECT
||
340 in_fmt
== SRP_DATA_DESC_DIRECT
) {
341 struct srp_direct_buf
*data
=
342 (struct srp_direct_buf
*) cmd
->add_data
;
343 dma_unmap_single(dev
, data
->va
, data
->len
, DMA_BIDIRECTIONAL
);
345 struct srp_indirect_buf
*indirect
=
346 (struct srp_indirect_buf
*) cmd
->add_data
;
347 int num_mapped
= indirect
->table_desc
.len
/
348 sizeof(struct srp_direct_buf
);
350 if (num_mapped
<= MAX_INDIRECT_BUFS
) {
351 unmap_sg_list(num_mapped
, dev
, &indirect
->desc_list
[0]);
355 unmap_sg_list(num_mapped
, dev
, evt_struct
->ext_list
);
359 static int map_sg_list(struct scsi_cmnd
*cmd
, int nseg
,
360 struct srp_direct_buf
*md
)
363 struct scatterlist
*sg
;
364 u64 total_length
= 0;
366 scsi_for_each_sg(cmd
, sg
, nseg
, i
) {
367 struct srp_direct_buf
*descr
= md
+ i
;
368 descr
->va
= sg_dma_address(sg
);
369 descr
->len
= sg_dma_len(sg
);
371 total_length
+= sg_dma_len(sg
);
377 * map_sg_data: - Maps dma for a scatterlist and initializes decriptor fields
378 * @cmd: Scsi_Cmnd with the scatterlist
379 * @srp_cmd: srp_cmd that contains the memory descriptor
380 * @dev: device for which to map dma memory
382 * Called by map_data_for_srp_cmd() when building srp cmd from scsi cmd.
383 * Returns 1 on success.
385 static int map_sg_data(struct scsi_cmnd
*cmd
,
386 struct srp_event_struct
*evt_struct
,
387 struct srp_cmd
*srp_cmd
, struct device
*dev
)
391 u64 total_length
= 0;
392 struct srp_direct_buf
*data
=
393 (struct srp_direct_buf
*) srp_cmd
->add_data
;
394 struct srp_indirect_buf
*indirect
=
395 (struct srp_indirect_buf
*) data
;
397 sg_mapped
= scsi_dma_map(cmd
);
400 else if (sg_mapped
< 0)
403 set_srp_direction(cmd
, srp_cmd
, sg_mapped
);
405 /* special case; we can use a single direct descriptor */
406 if (sg_mapped
== 1) {
407 map_sg_list(cmd
, sg_mapped
, data
);
411 indirect
->table_desc
.va
= 0;
412 indirect
->table_desc
.len
= sg_mapped
* sizeof(struct srp_direct_buf
);
413 indirect
->table_desc
.key
= 0;
415 if (sg_mapped
<= MAX_INDIRECT_BUFS
) {
416 total_length
= map_sg_list(cmd
, sg_mapped
,
417 &indirect
->desc_list
[0]);
418 indirect
->len
= total_length
;
422 /* get indirect table */
423 if (!evt_struct
->ext_list
) {
424 evt_struct
->ext_list
= (struct srp_direct_buf
*)
425 dma_alloc_coherent(dev
,
426 SG_ALL
* sizeof(struct srp_direct_buf
),
427 &evt_struct
->ext_list_token
, 0);
428 if (!evt_struct
->ext_list
) {
429 sdev_printk(KERN_ERR
, cmd
->device
,
430 "Can't allocate memory for indirect table\n");
435 total_length
= map_sg_list(cmd
, sg_mapped
, evt_struct
->ext_list
);
437 indirect
->len
= total_length
;
438 indirect
->table_desc
.va
= evt_struct
->ext_list_token
;
439 indirect
->table_desc
.len
= sg_mapped
* sizeof(indirect
->desc_list
[0]);
440 memcpy(indirect
->desc_list
, evt_struct
->ext_list
,
441 MAX_INDIRECT_BUFS
* sizeof(struct srp_direct_buf
));
446 * map_data_for_srp_cmd: - Calls functions to map data for srp cmds
447 * @cmd: struct scsi_cmnd with the memory to be mapped
448 * @srp_cmd: srp_cmd that contains the memory descriptor
449 * @dev: dma device for which to map dma memory
451 * Called by scsi_cmd_to_srp_cmd() when converting scsi cmds to srp cmds
452 * Returns 1 on success.
454 static int map_data_for_srp_cmd(struct scsi_cmnd
*cmd
,
455 struct srp_event_struct
*evt_struct
,
456 struct srp_cmd
*srp_cmd
, struct device
*dev
)
458 switch (cmd
->sc_data_direction
) {
459 case DMA_FROM_DEVICE
:
464 case DMA_BIDIRECTIONAL
:
465 sdev_printk(KERN_ERR
, cmd
->device
,
466 "Can't map DMA_BIDIRECTIONAL to read/write\n");
469 sdev_printk(KERN_ERR
, cmd
->device
,
470 "Unknown data direction 0x%02x; can't map!\n",
471 cmd
->sc_data_direction
);
475 return map_sg_data(cmd
, evt_struct
, srp_cmd
, dev
);
479 * purge_requests: Our virtual adapter just shut down. purge any sent requests
480 * @hostdata: the adapter
482 static void purge_requests(struct ibmvscsi_host_data
*hostdata
, int error_code
)
484 struct srp_event_struct
*tmp_evt
, *pos
;
487 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
488 list_for_each_entry_safe(tmp_evt
, pos
, &hostdata
->sent
, list
) {
489 list_del(&tmp_evt
->list
);
490 del_timer(&tmp_evt
->timer
);
492 tmp_evt
->cmnd
->result
= (error_code
<< 16);
493 unmap_cmd_data(&tmp_evt
->iu
.srp
.cmd
,
495 tmp_evt
->hostdata
->dev
);
496 if (tmp_evt
->cmnd_done
)
497 tmp_evt
->cmnd_done(tmp_evt
->cmnd
);
498 } else if (tmp_evt
->done
)
499 tmp_evt
->done(tmp_evt
);
500 free_event_struct(&tmp_evt
->hostdata
->pool
, tmp_evt
);
502 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
506 * ibmvscsi_reset_host - Reset the connection to the server
507 * @hostdata: struct ibmvscsi_host_data to reset
509 static void ibmvscsi_reset_host(struct ibmvscsi_host_data
*hostdata
)
511 scsi_block_requests(hostdata
->host
);
512 atomic_set(&hostdata
->request_limit
, 0);
514 purge_requests(hostdata
, DID_ERROR
);
515 if ((ibmvscsi_ops
->reset_crq_queue(&hostdata
->queue
, hostdata
)) ||
516 (ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0)) ||
517 (vio_enable_interrupts(to_vio_dev(hostdata
->dev
)))) {
518 atomic_set(&hostdata
->request_limit
, -1);
519 dev_err(hostdata
->dev
, "error after reset\n");
522 scsi_unblock_requests(hostdata
->host
);
526 * ibmvscsi_timeout - Internal command timeout handler
527 * @evt_struct: struct srp_event_struct that timed out
529 * Called when an internally generated command times out
531 static void ibmvscsi_timeout(struct srp_event_struct
*evt_struct
)
533 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
535 dev_err(hostdata
->dev
, "Command timed out (%x). Resetting connection\n",
536 evt_struct
->iu
.srp
.cmd
.opcode
);
538 ibmvscsi_reset_host(hostdata
);
542 /* ------------------------------------------------------------
543 * Routines for sending and receiving SRPs
546 * ibmvscsi_send_srp_event: - Transforms event to u64 array and calls send_crq()
547 * @evt_struct: evt_struct to be sent
548 * @hostdata: ibmvscsi_host_data of host
549 * @timeout: timeout in seconds - 0 means do not time command
551 * Returns the value returned from ibmvscsi_send_crq(). (Zero for success)
552 * Note that this routine assumes that host_lock is held for synchronization
554 static int ibmvscsi_send_srp_event(struct srp_event_struct
*evt_struct
,
555 struct ibmvscsi_host_data
*hostdata
,
556 unsigned long timeout
)
558 u64
*crq_as_u64
= (u64
*) &evt_struct
->crq
;
559 int request_status
= 0;
562 /* If we have exhausted our request limit, just fail this request,
563 * unless it is for a reset or abort.
564 * Note that there are rare cases involving driver generated requests
565 * (such as task management requests) that the mid layer may think we
566 * can handle more requests (can_queue) when we actually can't
568 if (evt_struct
->crq
.format
== VIOSRP_SRP_FORMAT
) {
570 atomic_dec_if_positive(&hostdata
->request_limit
);
571 /* If request limit was -1 when we started, it is now even
574 if (request_status
< -1)
576 /* Otherwise, we may have run out of requests. */
577 /* If request limit was 0 when we started the adapter is in the
578 * process of performing a login with the server adapter, or
579 * we may have run out of requests.
581 else if (request_status
== -1 &&
582 evt_struct
->iu
.srp
.login_req
.opcode
!= SRP_LOGIN_REQ
)
584 /* Abort and reset calls should make it through.
585 * Nothing except abort and reset should use the last two
586 * slots unless we had two or less to begin with.
588 else if (request_status
< 2 &&
589 evt_struct
->iu
.srp
.cmd
.opcode
!= SRP_TSK_MGMT
) {
590 /* In the case that we have less than two requests
591 * available, check the server limit as a combination
592 * of the request limit and the number of requests
593 * in-flight (the size of the send list). If the
594 * server limit is greater than 2, return busy so
595 * that the last two are reserved for reset and abort.
597 int server_limit
= request_status
;
598 struct srp_event_struct
*tmp_evt
;
600 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
604 if (server_limit
> 2)
609 /* Copy the IU into the transfer area */
610 *evt_struct
->xfer_iu
= evt_struct
->iu
;
611 evt_struct
->xfer_iu
->srp
.rsp
.tag
= (u64
)evt_struct
;
613 /* Add this to the sent list. We need to do this
614 * before we actually send
615 * in case it comes back REALLY fast
617 list_add_tail(&evt_struct
->list
, &hostdata
->sent
);
619 init_timer(&evt_struct
->timer
);
621 evt_struct
->timer
.data
= (unsigned long) evt_struct
;
622 evt_struct
->timer
.expires
= jiffies
+ (timeout
* HZ
);
623 evt_struct
->timer
.function
= (void (*)(unsigned long))ibmvscsi_timeout
;
624 add_timer(&evt_struct
->timer
);
628 ibmvscsi_ops
->send_crq(hostdata
, crq_as_u64
[0], crq_as_u64
[1])) != 0) {
629 list_del(&evt_struct
->list
);
630 del_timer(&evt_struct
->timer
);
632 /* If send_crq returns H_CLOSED, return SCSI_MLQUEUE_HOST_BUSY.
633 * Firmware will send a CRQ with a transport event (0xFF) to
634 * tell this client what has happened to the transport. This
635 * will be handled in ibmvscsi_handle_crq()
637 if (rc
== H_CLOSED
) {
638 dev_warn(hostdata
->dev
, "send warning. "
639 "Receive queue closed, will retry.\n");
642 dev_err(hostdata
->dev
, "send error %d\n", rc
);
643 atomic_inc(&hostdata
->request_limit
);
650 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
652 free_event_struct(&hostdata
->pool
, evt_struct
);
653 if (request_status
!= -1)
654 atomic_inc(&hostdata
->request_limit
);
655 return SCSI_MLQUEUE_HOST_BUSY
;
658 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
660 if (evt_struct
->cmnd
!= NULL
) {
661 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
662 evt_struct
->cmnd_done(evt_struct
->cmnd
);
663 } else if (evt_struct
->done
)
664 evt_struct
->done(evt_struct
);
666 free_event_struct(&hostdata
->pool
, evt_struct
);
671 * handle_cmd_rsp: - Handle responses from commands
672 * @evt_struct: srp_event_struct to be handled
674 * Used as a callback by when sending scsi cmds.
675 * Gets called by ibmvscsi_handle_crq()
677 static void handle_cmd_rsp(struct srp_event_struct
*evt_struct
)
679 struct srp_rsp
*rsp
= &evt_struct
->xfer_iu
->srp
.rsp
;
680 struct scsi_cmnd
*cmnd
= evt_struct
->cmnd
;
682 if (unlikely(rsp
->opcode
!= SRP_RSP
)) {
683 if (printk_ratelimit())
684 dev_warn(evt_struct
->hostdata
->dev
,
685 "bad SRP RSP type %d\n", rsp
->opcode
);
689 cmnd
->result
|= rsp
->status
;
690 if (((cmnd
->result
>> 1) & 0x1f) == CHECK_CONDITION
)
691 memcpy(cmnd
->sense_buffer
,
693 rsp
->sense_data_len
);
694 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
,
696 evt_struct
->hostdata
->dev
);
698 if (rsp
->flags
& SRP_RSP_FLAG_DOOVER
)
699 scsi_set_resid(cmnd
, rsp
->data_out_res_cnt
);
700 else if (rsp
->flags
& SRP_RSP_FLAG_DIOVER
)
701 scsi_set_resid(cmnd
, rsp
->data_in_res_cnt
);
704 if (evt_struct
->cmnd_done
)
705 evt_struct
->cmnd_done(cmnd
);
709 * lun_from_dev: - Returns the lun of the scsi device
710 * @dev: struct scsi_device
713 static inline u16
lun_from_dev(struct scsi_device
*dev
)
715 return (0x2 << 14) | (dev
->id
<< 8) | (dev
->channel
<< 5) | dev
->lun
;
719 * ibmvscsi_queue: - The queuecommand function of the scsi template
720 * @cmd: struct scsi_cmnd to be executed
721 * @done: Callback function to be called when cmd is completed
723 static int ibmvscsi_queuecommand(struct scsi_cmnd
*cmnd
,
724 void (*done
) (struct scsi_cmnd
*))
726 struct srp_cmd
*srp_cmd
;
727 struct srp_event_struct
*evt_struct
;
728 struct srp_indirect_buf
*indirect
;
729 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmnd
->device
->host
);
730 u16 lun
= lun_from_dev(cmnd
->device
);
733 cmnd
->result
= (DID_OK
<< 16);
734 evt_struct
= get_event_struct(&hostdata
->pool
);
736 return SCSI_MLQUEUE_HOST_BUSY
;
738 /* Set up the actual SRP IU */
739 srp_cmd
= &evt_struct
->iu
.srp
.cmd
;
740 memset(srp_cmd
, 0x00, SRP_MAX_IU_LEN
);
741 srp_cmd
->opcode
= SRP_CMD
;
742 memcpy(srp_cmd
->cdb
, cmnd
->cmnd
, sizeof(srp_cmd
->cdb
));
743 srp_cmd
->lun
= ((u64
) lun
) << 48;
745 if (!map_data_for_srp_cmd(cmnd
, evt_struct
, srp_cmd
, hostdata
->dev
)) {
746 sdev_printk(KERN_ERR
, cmnd
->device
, "couldn't convert cmd to srp_cmd\n");
747 free_event_struct(&hostdata
->pool
, evt_struct
);
748 return SCSI_MLQUEUE_HOST_BUSY
;
751 init_event_struct(evt_struct
,
754 cmnd
->timeout_per_command
/HZ
);
756 evt_struct
->cmnd
= cmnd
;
757 evt_struct
->cmnd_done
= done
;
759 /* Fix up dma address of the buffer itself */
760 indirect
= (struct srp_indirect_buf
*) srp_cmd
->add_data
;
761 out_fmt
= srp_cmd
->buf_fmt
>> 4;
762 in_fmt
= srp_cmd
->buf_fmt
& ((1U << 4) - 1);
763 if ((in_fmt
== SRP_DATA_DESC_INDIRECT
||
764 out_fmt
== SRP_DATA_DESC_INDIRECT
) &&
765 indirect
->table_desc
.va
== 0) {
766 indirect
->table_desc
.va
= evt_struct
->crq
.IU_data_ptr
+
767 offsetof(struct srp_cmd
, add_data
) +
768 offsetof(struct srp_indirect_buf
, desc_list
);
771 return ibmvscsi_send_srp_event(evt_struct
, hostdata
, 0);
774 /* ------------------------------------------------------------
775 * Routines for driver initialization
778 * adapter_info_rsp: - Handle response to MAD adapter info request
779 * @evt_struct: srp_event_struct with the response
781 * Used as a "done" callback by when sending adapter_info. Gets called
782 * by ibmvscsi_handle_crq()
784 static void adapter_info_rsp(struct srp_event_struct
*evt_struct
)
786 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
787 dma_unmap_single(hostdata
->dev
,
788 evt_struct
->iu
.mad
.adapter_info
.buffer
,
789 evt_struct
->iu
.mad
.adapter_info
.common
.length
,
792 if (evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
) {
793 dev_err(hostdata
->dev
, "error %d getting adapter info\n",
794 evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
);
796 dev_info(hostdata
->dev
, "host srp version: %s, "
797 "host partition %s (%d), OS %d, max io %u\n",
798 hostdata
->madapter_info
.srp_version
,
799 hostdata
->madapter_info
.partition_name
,
800 hostdata
->madapter_info
.partition_number
,
801 hostdata
->madapter_info
.os_type
,
802 hostdata
->madapter_info
.port_max_txu
[0]);
804 if (hostdata
->madapter_info
.port_max_txu
[0])
805 hostdata
->host
->max_sectors
=
806 hostdata
->madapter_info
.port_max_txu
[0] >> 9;
808 if (hostdata
->madapter_info
.os_type
== 3 &&
809 strcmp(hostdata
->madapter_info
.srp_version
, "1.6a") <= 0) {
810 dev_err(hostdata
->dev
, "host (Ver. %s) doesn't support large transfers\n",
811 hostdata
->madapter_info
.srp_version
);
812 dev_err(hostdata
->dev
, "limiting scatterlists to %d\n",
814 hostdata
->host
->sg_tablesize
= MAX_INDIRECT_BUFS
;
820 * send_mad_adapter_info: - Sends the mad adapter info request
821 * and stores the result so it can be retrieved with
822 * sysfs. We COULD consider causing a failure if the
823 * returned SRP version doesn't match ours.
824 * @hostdata: ibmvscsi_host_data of host
826 * Returns zero if successful.
828 static void send_mad_adapter_info(struct ibmvscsi_host_data
*hostdata
)
830 struct viosrp_adapter_info
*req
;
831 struct srp_event_struct
*evt_struct
;
835 evt_struct
= get_event_struct(&hostdata
->pool
);
837 dev_err(hostdata
->dev
,
838 "couldn't allocate an event for ADAPTER_INFO_REQ!\n");
842 init_event_struct(evt_struct
,
847 req
= &evt_struct
->iu
.mad
.adapter_info
;
848 memset(req
, 0x00, sizeof(*req
));
850 req
->common
.type
= VIOSRP_ADAPTER_INFO_TYPE
;
851 req
->common
.length
= sizeof(hostdata
->madapter_info
);
852 req
->buffer
= addr
= dma_map_single(hostdata
->dev
,
853 &hostdata
->madapter_info
,
854 sizeof(hostdata
->madapter_info
),
857 if (dma_mapping_error(req
->buffer
)) {
858 dev_err(hostdata
->dev
, "Unable to map request_buffer for adapter_info!\n");
859 free_event_struct(&hostdata
->pool
, evt_struct
);
863 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
864 if (ibmvscsi_send_srp_event(evt_struct
, hostdata
, init_timeout
* 2)) {
865 dev_err(hostdata
->dev
, "couldn't send ADAPTER_INFO_REQ!\n");
866 dma_unmap_single(hostdata
->dev
,
868 sizeof(hostdata
->madapter_info
),
871 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
875 * login_rsp: - Handle response to SRP login request
876 * @evt_struct: srp_event_struct with the response
878 * Used as a "done" callback by when sending srp_login. Gets called
879 * by ibmvscsi_handle_crq()
881 static void login_rsp(struct srp_event_struct
*evt_struct
)
883 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
884 switch (evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
) {
885 case SRP_LOGIN_RSP
: /* it worked! */
887 case SRP_LOGIN_REJ
: /* refused! */
888 dev_info(hostdata
->dev
, "SRP_LOGIN_REJ reason %u\n",
889 evt_struct
->xfer_iu
->srp
.login_rej
.reason
);
891 atomic_set(&hostdata
->request_limit
, -1);
894 dev_err(hostdata
->dev
, "Invalid login response typecode 0x%02x!\n",
895 evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
);
897 atomic_set(&hostdata
->request_limit
, -1);
901 dev_info(hostdata
->dev
, "SRP_LOGIN succeeded\n");
903 if (evt_struct
->xfer_iu
->srp
.login_rsp
.req_lim_delta
< 0)
904 dev_err(hostdata
->dev
, "Invalid request_limit.\n");
906 /* Now we know what the real request-limit is.
907 * This value is set rather than added to request_limit because
908 * request_limit could have been set to -1 by this client.
910 atomic_set(&hostdata
->request_limit
,
911 evt_struct
->xfer_iu
->srp
.login_rsp
.req_lim_delta
);
913 /* If we had any pending I/Os, kick them */
914 scsi_unblock_requests(hostdata
->host
);
916 send_mad_adapter_info(hostdata
);
921 * send_srp_login: - Sends the srp login
922 * @hostdata: ibmvscsi_host_data of host
924 * Returns zero if successful.
926 static int send_srp_login(struct ibmvscsi_host_data
*hostdata
)
930 struct srp_login_req
*login
;
931 struct srp_event_struct
*evt_struct
= get_event_struct(&hostdata
->pool
);
933 dev_err(hostdata
->dev
, "couldn't allocate an event for login req!\n");
937 init_event_struct(evt_struct
,
942 login
= &evt_struct
->iu
.srp
.login_req
;
943 memset(login
, 0x00, sizeof(struct srp_login_req
));
944 login
->opcode
= SRP_LOGIN_REQ
;
945 login
->req_it_iu_len
= sizeof(union srp_iu
);
946 login
->req_buf_fmt
= SRP_BUF_FORMAT_DIRECT
| SRP_BUF_FORMAT_INDIRECT
;
948 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
949 /* Start out with a request limit of 0, since this is negotiated in
950 * the login request we are just sending and login requests always
951 * get sent by the driver regardless of request_limit.
953 atomic_set(&hostdata
->request_limit
, 0);
955 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, init_timeout
* 2);
956 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
957 dev_info(hostdata
->dev
, "sent SRP login\n");
962 * sync_completion: Signal that a synchronous command has completed
963 * Note that after returning from this call, the evt_struct is freed.
964 * the caller waiting on this completion shouldn't touch the evt_struct
967 static void sync_completion(struct srp_event_struct
*evt_struct
)
969 /* copy the response back */
970 if (evt_struct
->sync_srp
)
971 *evt_struct
->sync_srp
= *evt_struct
->xfer_iu
;
973 complete(&evt_struct
->comp
);
977 * ibmvscsi_abort: Abort a command...from scsi host template
978 * send this over to the server and wait synchronously for the response
980 static int ibmvscsi_eh_abort_handler(struct scsi_cmnd
*cmd
)
982 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
983 struct srp_tsk_mgmt
*tsk_mgmt
;
984 struct srp_event_struct
*evt
;
985 struct srp_event_struct
*tmp_evt
, *found_evt
;
986 union viosrp_iu srp_rsp
;
989 u16 lun
= lun_from_dev(cmd
->device
);
990 unsigned long wait_switch
= 0;
992 /* First, find this command in our sent list so we can figure
993 * out the correct tag
995 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
996 wait_switch
= jiffies
+ (init_timeout
* HZ
);
999 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1000 if (tmp_evt
->cmnd
== cmd
) {
1001 found_evt
= tmp_evt
;
1007 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1011 evt
= get_event_struct(&hostdata
->pool
);
1013 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1014 sdev_printk(KERN_ERR
, cmd
->device
,
1015 "failed to allocate abort event\n");
1019 init_event_struct(evt
,
1024 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1026 /* Set up an abort SRP command */
1027 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1028 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1029 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1030 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_ABORT_TASK
;
1031 tsk_mgmt
->task_tag
= (u64
) found_evt
;
1033 evt
->sync_srp
= &srp_rsp
;
1035 init_completion(&evt
->comp
);
1036 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, init_timeout
* 2);
1038 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1041 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1043 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1044 } while (time_before(jiffies
, wait_switch
));
1046 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1049 sdev_printk(KERN_ERR
, cmd
->device
,
1050 "failed to send abort() event. rc=%d\n", rsp_rc
);
1054 sdev_printk(KERN_INFO
, cmd
->device
,
1055 "aborting command. lun 0x%lx, tag 0x%lx\n",
1056 (((u64
) lun
) << 48), (u64
) found_evt
);
1058 wait_for_completion(&evt
->comp
);
1060 /* make sure we got a good response */
1061 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1062 if (printk_ratelimit())
1063 sdev_printk(KERN_WARNING
, cmd
->device
, "abort bad SRP RSP type %d\n",
1064 srp_rsp
.srp
.rsp
.opcode
);
1068 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1069 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1071 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1074 if (printk_ratelimit())
1075 sdev_printk(KERN_WARNING
, cmd
->device
,
1076 "abort code %d for task tag 0x%lx\n",
1077 rsp_rc
, tsk_mgmt
->task_tag
);
1081 /* Because we dropped the spinlock above, it's possible
1082 * The event is no longer in our list. Make sure it didn't
1083 * complete while we were aborting
1085 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1087 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1088 if (tmp_evt
->cmnd
== cmd
) {
1089 found_evt
= tmp_evt
;
1094 if (found_evt
== NULL
) {
1095 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1096 sdev_printk(KERN_INFO
, cmd
->device
, "aborted task tag 0x%lx completed\n",
1097 tsk_mgmt
->task_tag
);
1101 sdev_printk(KERN_INFO
, cmd
->device
, "successfully aborted task tag 0x%lx\n",
1102 tsk_mgmt
->task_tag
);
1104 cmd
->result
= (DID_ABORT
<< 16);
1105 list_del(&found_evt
->list
);
1106 unmap_cmd_data(&found_evt
->iu
.srp
.cmd
, found_evt
,
1107 found_evt
->hostdata
->dev
);
1108 free_event_struct(&found_evt
->hostdata
->pool
, found_evt
);
1109 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1110 atomic_inc(&hostdata
->request_limit
);
1115 * ibmvscsi_eh_device_reset_handler: Reset a single LUN...from scsi host
1116 * template send this over to the server and wait synchronously for the
1119 static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd
*cmd
)
1121 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1122 struct srp_tsk_mgmt
*tsk_mgmt
;
1123 struct srp_event_struct
*evt
;
1124 struct srp_event_struct
*tmp_evt
, *pos
;
1125 union viosrp_iu srp_rsp
;
1127 unsigned long flags
;
1128 u16 lun
= lun_from_dev(cmd
->device
);
1129 unsigned long wait_switch
= 0;
1131 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1132 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1134 evt
= get_event_struct(&hostdata
->pool
);
1136 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1137 sdev_printk(KERN_ERR
, cmd
->device
,
1138 "failed to allocate reset event\n");
1142 init_event_struct(evt
,
1147 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1149 /* Set up a lun reset SRP command */
1150 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1151 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1152 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1153 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_LUN_RESET
;
1155 evt
->sync_srp
= &srp_rsp
;
1157 init_completion(&evt
->comp
);
1158 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, init_timeout
* 2);
1160 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1163 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1165 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1166 } while (time_before(jiffies
, wait_switch
));
1168 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1171 sdev_printk(KERN_ERR
, cmd
->device
,
1172 "failed to send reset event. rc=%d\n", rsp_rc
);
1176 sdev_printk(KERN_INFO
, cmd
->device
, "resetting device. lun 0x%lx\n",
1177 (((u64
) lun
) << 48));
1179 wait_for_completion(&evt
->comp
);
1181 /* make sure we got a good response */
1182 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1183 if (printk_ratelimit())
1184 sdev_printk(KERN_WARNING
, cmd
->device
, "reset bad SRP RSP type %d\n",
1185 srp_rsp
.srp
.rsp
.opcode
);
1189 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1190 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1192 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1195 if (printk_ratelimit())
1196 sdev_printk(KERN_WARNING
, cmd
->device
,
1197 "reset code %d for task tag 0x%lx\n",
1198 rsp_rc
, tsk_mgmt
->task_tag
);
1202 /* We need to find all commands for this LUN that have not yet been
1203 * responded to, and fail them with DID_RESET
1205 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1206 list_for_each_entry_safe(tmp_evt
, pos
, &hostdata
->sent
, list
) {
1207 if ((tmp_evt
->cmnd
) && (tmp_evt
->cmnd
->device
== cmd
->device
)) {
1209 tmp_evt
->cmnd
->result
= (DID_RESET
<< 16);
1210 list_del(&tmp_evt
->list
);
1211 unmap_cmd_data(&tmp_evt
->iu
.srp
.cmd
, tmp_evt
,
1212 tmp_evt
->hostdata
->dev
);
1213 free_event_struct(&tmp_evt
->hostdata
->pool
,
1215 atomic_inc(&hostdata
->request_limit
);
1216 if (tmp_evt
->cmnd_done
)
1217 tmp_evt
->cmnd_done(tmp_evt
->cmnd
);
1218 else if (tmp_evt
->done
)
1219 tmp_evt
->done(tmp_evt
);
1222 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1227 * ibmvscsi_eh_host_reset_handler - Reset the connection to the server
1228 * @cmd: struct scsi_cmnd having problems
1230 static int ibmvscsi_eh_host_reset_handler(struct scsi_cmnd
*cmd
)
1232 unsigned long wait_switch
= 0;
1233 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1235 dev_err(hostdata
->dev
, "Resetting connection due to error recovery\n");
1237 ibmvscsi_reset_host(hostdata
);
1239 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1240 time_before(jiffies
, wait_switch
) &&
1241 atomic_read(&hostdata
->request_limit
) < 2;) {
1246 if (atomic_read(&hostdata
->request_limit
) <= 0)
1253 * ibmvscsi_handle_crq: - Handles and frees received events in the CRQ
1254 * @crq: Command/Response queue
1255 * @hostdata: ibmvscsi_host_data of host
1258 void ibmvscsi_handle_crq(struct viosrp_crq
*crq
,
1259 struct ibmvscsi_host_data
*hostdata
)
1262 unsigned long flags
;
1263 struct srp_event_struct
*evt_struct
=
1264 (struct srp_event_struct
*)crq
->IU_data_ptr
;
1265 switch (crq
->valid
) {
1266 case 0xC0: /* initialization */
1267 switch (crq
->format
) {
1268 case 0x01: /* Initialization message */
1269 dev_info(hostdata
->dev
, "partner initialized\n");
1270 /* Send back a response */
1271 if ((rc
= ibmvscsi_ops
->send_crq(hostdata
,
1272 0xC002000000000000LL
, 0)) == 0) {
1274 send_srp_login(hostdata
);
1276 dev_err(hostdata
->dev
, "Unable to send init rsp. rc=%ld\n", rc
);
1280 case 0x02: /* Initialization response */
1281 dev_info(hostdata
->dev
, "partner initialization complete\n");
1284 send_srp_login(hostdata
);
1287 dev_err(hostdata
->dev
, "unknown crq message type: %d\n", crq
->format
);
1290 case 0xFF: /* Hypervisor telling us the connection is closed */
1291 scsi_block_requests(hostdata
->host
);
1292 atomic_set(&hostdata
->request_limit
, 0);
1293 if (crq
->format
== 0x06) {
1294 /* We need to re-setup the interpartition connection */
1295 dev_info(hostdata
->dev
, "Re-enabling adapter!\n");
1296 purge_requests(hostdata
, DID_REQUEUE
);
1297 if ((ibmvscsi_ops
->reenable_crq_queue(&hostdata
->queue
,
1299 (ibmvscsi_ops
->send_crq(hostdata
,
1300 0xC001000000000000LL
, 0))) {
1301 atomic_set(&hostdata
->request_limit
,
1303 dev_err(hostdata
->dev
, "error after enable\n");
1306 dev_err(hostdata
->dev
, "Virtual adapter failed rc %d!\n",
1309 purge_requests(hostdata
, DID_ERROR
);
1310 if ((ibmvscsi_ops
->reset_crq_queue(&hostdata
->queue
,
1312 (ibmvscsi_ops
->send_crq(hostdata
,
1313 0xC001000000000000LL
, 0))) {
1314 atomic_set(&hostdata
->request_limit
,
1316 dev_err(hostdata
->dev
, "error after reset\n");
1319 scsi_unblock_requests(hostdata
->host
);
1321 case 0x80: /* real payload */
1324 dev_err(hostdata
->dev
, "got an invalid message type 0x%02x\n",
1329 /* The only kind of payload CRQs we should get are responses to
1330 * things we send. Make sure this response is to something we
1333 if (!valid_event_struct(&hostdata
->pool
, evt_struct
)) {
1334 dev_err(hostdata
->dev
, "returned correlation_token 0x%p is invalid!\n",
1335 (void *)crq
->IU_data_ptr
);
1339 if (atomic_read(&evt_struct
->free
)) {
1340 dev_err(hostdata
->dev
, "received duplicate correlation_token 0x%p!\n",
1341 (void *)crq
->IU_data_ptr
);
1345 if (crq
->format
== VIOSRP_SRP_FORMAT
)
1346 atomic_add(evt_struct
->xfer_iu
->srp
.rsp
.req_lim_delta
,
1347 &hostdata
->request_limit
);
1349 del_timer(&evt_struct
->timer
);
1351 if (crq
->status
!= VIOSRP_OK
&& evt_struct
->cmnd
)
1352 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
1353 if (evt_struct
->done
)
1354 evt_struct
->done(evt_struct
);
1356 dev_err(hostdata
->dev
, "returned done() is NULL; not running it!\n");
1359 * Lock the host_lock before messing with these structures, since we
1360 * are running in a task context
1362 spin_lock_irqsave(evt_struct
->hostdata
->host
->host_lock
, flags
);
1363 list_del(&evt_struct
->list
);
1364 free_event_struct(&evt_struct
->hostdata
->pool
, evt_struct
);
1365 spin_unlock_irqrestore(evt_struct
->hostdata
->host
->host_lock
, flags
);
1369 * ibmvscsi_get_host_config: Send the command to the server to get host
1370 * configuration data. The data is opaque to us.
1372 static int ibmvscsi_do_host_config(struct ibmvscsi_host_data
*hostdata
,
1373 unsigned char *buffer
, int length
)
1375 struct viosrp_host_config
*host_config
;
1376 struct srp_event_struct
*evt_struct
;
1377 unsigned long flags
;
1381 evt_struct
= get_event_struct(&hostdata
->pool
);
1383 dev_err(hostdata
->dev
, "couldn't allocate event for HOST_CONFIG!\n");
1387 init_event_struct(evt_struct
,
1392 host_config
= &evt_struct
->iu
.mad
.host_config
;
1394 /* Set up a lun reset SRP command */
1395 memset(host_config
, 0x00, sizeof(*host_config
));
1396 host_config
->common
.type
= VIOSRP_HOST_CONFIG_TYPE
;
1397 host_config
->common
.length
= length
;
1398 host_config
->buffer
= addr
= dma_map_single(hostdata
->dev
, buffer
,
1402 if (dma_mapping_error(host_config
->buffer
)) {
1403 dev_err(hostdata
->dev
, "dma_mapping error getting host config\n");
1404 free_event_struct(&hostdata
->pool
, evt_struct
);
1408 init_completion(&evt_struct
->comp
);
1409 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1410 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, init_timeout
* 2);
1411 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1413 wait_for_completion(&evt_struct
->comp
);
1414 dma_unmap_single(hostdata
->dev
, addr
, length
, DMA_BIDIRECTIONAL
);
1420 * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
1421 * @sdev: struct scsi_device device to configure
1423 * Enable allow_restart for a device if it is a disk. Adjust the
1424 * queue_depth here also as is required by the documentation for
1425 * struct scsi_host_template.
1427 static int ibmvscsi_slave_configure(struct scsi_device
*sdev
)
1429 struct Scsi_Host
*shost
= sdev
->host
;
1430 unsigned long lock_flags
= 0;
1432 spin_lock_irqsave(shost
->host_lock
, lock_flags
);
1433 if (sdev
->type
== TYPE_DISK
) {
1434 sdev
->allow_restart
= 1;
1435 sdev
->timeout
= 60 * HZ
;
1437 scsi_adjust_queue_depth(sdev
, 0, shost
->cmd_per_lun
);
1438 spin_unlock_irqrestore(shost
->host_lock
, lock_flags
);
1443 * ibmvscsi_change_queue_depth - Change the device's queue depth
1444 * @sdev: scsi device struct
1445 * @qdepth: depth to set
1450 static int ibmvscsi_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
1452 if (qdepth
> IBMVSCSI_MAX_CMDS_PER_LUN
)
1453 qdepth
= IBMVSCSI_MAX_CMDS_PER_LUN
;
1455 scsi_adjust_queue_depth(sdev
, 0, qdepth
);
1456 return sdev
->queue_depth
;
1459 /* ------------------------------------------------------------
1462 static ssize_t
show_host_srp_version(struct device
*dev
,
1463 struct device_attribute
*attr
, char *buf
)
1465 struct Scsi_Host
*shost
= class_to_shost(dev
);
1466 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1469 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1470 hostdata
->madapter_info
.srp_version
);
1474 static struct device_attribute ibmvscsi_host_srp_version
= {
1476 .name
= "srp_version",
1479 .show
= show_host_srp_version
,
1482 static ssize_t
show_host_partition_name(struct device
*dev
,
1483 struct device_attribute
*attr
,
1486 struct Scsi_Host
*shost
= class_to_shost(dev
);
1487 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1490 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1491 hostdata
->madapter_info
.partition_name
);
1495 static struct device_attribute ibmvscsi_host_partition_name
= {
1497 .name
= "partition_name",
1500 .show
= show_host_partition_name
,
1503 static ssize_t
show_host_partition_number(struct device
*dev
,
1504 struct device_attribute
*attr
,
1507 struct Scsi_Host
*shost
= class_to_shost(dev
);
1508 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1511 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
1512 hostdata
->madapter_info
.partition_number
);
1516 static struct device_attribute ibmvscsi_host_partition_number
= {
1518 .name
= "partition_number",
1521 .show
= show_host_partition_number
,
1524 static ssize_t
show_host_mad_version(struct device
*dev
,
1525 struct device_attribute
*attr
, char *buf
)
1527 struct Scsi_Host
*shost
= class_to_shost(dev
);
1528 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1531 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
1532 hostdata
->madapter_info
.mad_version
);
1536 static struct device_attribute ibmvscsi_host_mad_version
= {
1538 .name
= "mad_version",
1541 .show
= show_host_mad_version
,
1544 static ssize_t
show_host_os_type(struct device
*dev
,
1545 struct device_attribute
*attr
, char *buf
)
1547 struct Scsi_Host
*shost
= class_to_shost(dev
);
1548 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1551 len
= snprintf(buf
, PAGE_SIZE
, "%d\n", hostdata
->madapter_info
.os_type
);
1555 static struct device_attribute ibmvscsi_host_os_type
= {
1560 .show
= show_host_os_type
,
1563 static ssize_t
show_host_config(struct device
*dev
,
1564 struct device_attribute
*attr
, char *buf
)
1566 struct Scsi_Host
*shost
= class_to_shost(dev
);
1567 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1569 /* returns null-terminated host config data */
1570 if (ibmvscsi_do_host_config(hostdata
, buf
, PAGE_SIZE
) == 0)
1576 static struct device_attribute ibmvscsi_host_config
= {
1581 .show
= show_host_config
,
1584 static struct device_attribute
*ibmvscsi_attrs
[] = {
1585 &ibmvscsi_host_srp_version
,
1586 &ibmvscsi_host_partition_name
,
1587 &ibmvscsi_host_partition_number
,
1588 &ibmvscsi_host_mad_version
,
1589 &ibmvscsi_host_os_type
,
1590 &ibmvscsi_host_config
,
1594 /* ------------------------------------------------------------
1595 * SCSI driver registration
1597 static struct scsi_host_template driver_template
= {
1598 .module
= THIS_MODULE
,
1599 .name
= "IBM POWER Virtual SCSI Adapter " IBMVSCSI_VERSION
,
1600 .proc_name
= "ibmvscsi",
1601 .queuecommand
= ibmvscsi_queuecommand
,
1602 .eh_abort_handler
= ibmvscsi_eh_abort_handler
,
1603 .eh_device_reset_handler
= ibmvscsi_eh_device_reset_handler
,
1604 .eh_host_reset_handler
= ibmvscsi_eh_host_reset_handler
,
1605 .slave_configure
= ibmvscsi_slave_configure
,
1606 .change_queue_depth
= ibmvscsi_change_queue_depth
,
1608 .can_queue
= IBMVSCSI_MAX_REQUESTS_DEFAULT
,
1610 .sg_tablesize
= SG_ALL
,
1611 .use_clustering
= ENABLE_CLUSTERING
,
1612 .shost_attrs
= ibmvscsi_attrs
,
1616 * Called by bus code for each adapter
1618 static int ibmvscsi_probe(struct vio_dev
*vdev
, const struct vio_device_id
*id
)
1620 struct ibmvscsi_host_data
*hostdata
;
1621 struct Scsi_Host
*host
;
1622 struct device
*dev
= &vdev
->dev
;
1623 struct srp_rport_identifiers ids
;
1624 struct srp_rport
*rport
;
1625 unsigned long wait_switch
= 0;
1628 vdev
->dev
.driver_data
= NULL
;
1630 driver_template
.can_queue
= max_requests
;
1631 host
= scsi_host_alloc(&driver_template
, sizeof(*hostdata
));
1633 dev_err(&vdev
->dev
, "couldn't allocate host data\n");
1634 goto scsi_host_alloc_failed
;
1637 host
->transportt
= ibmvscsi_transport_template
;
1638 hostdata
= shost_priv(host
);
1639 memset(hostdata
, 0x00, sizeof(*hostdata
));
1640 INIT_LIST_HEAD(&hostdata
->sent
);
1641 hostdata
->host
= host
;
1642 hostdata
->dev
= dev
;
1643 atomic_set(&hostdata
->request_limit
, -1);
1644 hostdata
->host
->max_sectors
= 32 * 8; /* default max I/O 32 pages */
1646 rc
= ibmvscsi_ops
->init_crq_queue(&hostdata
->queue
, hostdata
, max_requests
);
1647 if (rc
!= 0 && rc
!= H_RESOURCE
) {
1648 dev_err(&vdev
->dev
, "couldn't initialize crq. rc=%d\n", rc
);
1649 goto init_crq_failed
;
1651 if (initialize_event_pool(&hostdata
->pool
, max_requests
, hostdata
) != 0) {
1652 dev_err(&vdev
->dev
, "couldn't initialize event pool\n");
1653 goto init_pool_failed
;
1657 host
->max_id
= max_id
;
1658 host
->max_channel
= max_channel
;
1660 if (scsi_add_host(hostdata
->host
, hostdata
->dev
))
1661 goto add_host_failed
;
1663 /* we don't have a proper target_port_id so let's use the fake one */
1664 memcpy(ids
.port_id
, hostdata
->madapter_info
.partition_name
,
1665 sizeof(ids
.port_id
));
1666 ids
.roles
= SRP_RPORT_ROLE_TARGET
;
1667 rport
= srp_rport_add(host
, &ids
);
1669 goto add_srp_port_failed
;
1671 /* Try to send an initialization message. Note that this is allowed
1672 * to fail if the other end is not acive. In that case we don't
1675 if (ibmvscsi_ops
->send_crq(hostdata
, 0xC001000000000000LL
, 0) == 0
1676 || rc
== H_RESOURCE
) {
1678 * Wait around max init_timeout secs for the adapter to finish
1679 * initializing. When we are done initializing, we will have a
1680 * valid request_limit. We don't want Linux scanning before
1683 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1684 time_before(jiffies
, wait_switch
) &&
1685 atomic_read(&hostdata
->request_limit
) < 2;) {
1690 /* if we now have a valid request_limit, initiate a scan */
1691 if (atomic_read(&hostdata
->request_limit
) > 0)
1692 scsi_scan_host(host
);
1695 vdev
->dev
.driver_data
= hostdata
;
1698 add_srp_port_failed
:
1699 scsi_remove_host(hostdata
->host
);
1701 release_event_pool(&hostdata
->pool
, hostdata
);
1703 ibmvscsi_ops
->release_crq_queue(&hostdata
->queue
, hostdata
, max_requests
);
1705 scsi_host_put(host
);
1706 scsi_host_alloc_failed
:
1710 static int ibmvscsi_remove(struct vio_dev
*vdev
)
1712 struct ibmvscsi_host_data
*hostdata
= vdev
->dev
.driver_data
;
1713 release_event_pool(&hostdata
->pool
, hostdata
);
1714 ibmvscsi_ops
->release_crq_queue(&hostdata
->queue
, hostdata
,
1717 srp_remove_host(hostdata
->host
);
1718 scsi_remove_host(hostdata
->host
);
1719 scsi_host_put(hostdata
->host
);
1725 * ibmvscsi_device_table: Used by vio.c to match devices in the device tree we
1728 static struct vio_device_id ibmvscsi_device_table
[] __devinitdata
= {
1729 {"vscsi", "IBM,v-scsi"},
1732 MODULE_DEVICE_TABLE(vio
, ibmvscsi_device_table
);
1734 static struct vio_driver ibmvscsi_driver
= {
1735 .id_table
= ibmvscsi_device_table
,
1736 .probe
= ibmvscsi_probe
,
1737 .remove
= ibmvscsi_remove
,
1740 .owner
= THIS_MODULE
,
1744 static struct srp_function_template ibmvscsi_transport_functions
= {
1747 int __init
ibmvscsi_module_init(void)
1751 if (firmware_has_feature(FW_FEATURE_ISERIES
))
1752 ibmvscsi_ops
= &iseriesvscsi_ops
;
1753 else if (firmware_has_feature(FW_FEATURE_VIO
))
1754 ibmvscsi_ops
= &rpavscsi_ops
;
1758 ibmvscsi_transport_template
=
1759 srp_attach_transport(&ibmvscsi_transport_functions
);
1760 if (!ibmvscsi_transport_template
)
1763 ret
= vio_register_driver(&ibmvscsi_driver
);
1765 srp_release_transport(ibmvscsi_transport_template
);
1769 void __exit
ibmvscsi_module_exit(void)
1771 vio_unregister_driver(&ibmvscsi_driver
);
1772 srp_release_transport(ibmvscsi_transport_template
);
1775 module_init(ibmvscsi_module_init
);
1776 module_exit(ibmvscsi_module_exit
);