drivers/usb/storage/unusual_devs.h

   1 /* Driver for USB Mass Storage compliant devices
   2  * Unusual Devices File
   3  *
   4  * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
   5  *
   6  * Current development and maintenance by:
   7  *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   8  *
   9  * Initial work by:
  10  *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
  11  *
  12  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  13  * information about this driver.
  14  *
  15  * This program is free software; you can redistribute it and/or modify it
  16  * under the terms of the GNU General Public License as published by the
  17  * Free Software Foundation; either version 2, or (at your option) any
  18  * later version.
  19  *
  20  * This program is distributed in the hope that it will be useful, but
  21  * WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  23  * General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License along
  26  * with this program; if not, write to the Free Software Foundation, Inc.,
  27  * 675 Mass Ave, Cambridge, MA 02139, USA.
  28  */
  29
  30 /* IMPORTANT NOTE: This file must be included in another file which does
  31  * the following thing for it to work:
  32  * The macro UNUSUAL_DEV() must be defined before this file is included
  33  */
  34
  35 /* If you edit this file, please try to keep it sorted first by VendorID,
  36  * then by ProductID.
  37  *
  38  * If you want to add an entry for this file, be sure to include the
  39  * following information:
  40  *      - a patch that adds the entry for your device, including your
  41  *        email address right above the entry (plus maybe a brief
  42  *        explanation of the reason for the entry),
  43  *      - a copy of /proc/bus/usb/devices with your device plugged in
  44  *        running with this patch.
  45  * Send your submission to either Phil Dibowitz <phil@ipom.com> or
  46  * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
  47  * USB development list <linux-usb@vger.kernel.org> and the USB storage list
  48  * <usb-storage@lists.one-eyed-alien.net>
  49  */
  50
  51 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
  52  */
  53 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
  54                 "ATMEL",
  55                 "SND1 Storage",
  56                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  57                 US_FL_IGNORE_RESIDUE),
  58
  59 /* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
  60 UNUSUAL_DEV(  0x03ee, 0x6901, 0x0000, 0x0200,
  61                 "Mitsumi",
  62                 "USB FDD",
  63                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  64                 US_FL_SINGLE_LUN ),
  65
  66 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */
  67 UNUSUAL_DEV(  0x03ee, 0x6906, 0x0003, 0x0003,
  68                 "VIA Technologies Inc.",
  69                 "Mitsumi multi cardreader",
  70                 US_SC_DEVICE, US_PR_DEVICE, NULL,
  71                 US_FL_IGNORE_RESIDUE ),
  72
  73 UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
  74                 "HP",
  75                 "CD-Writer+",
  76                 US_SC_8070, US_PR_CB, NULL, 0),
  77
  78 #ifdef CONFIG_USB_STORAGE_USBAT
  79 UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
  80                 "HP",
  81                 "CD-Writer+ 8200e",
  82                 US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
  83
  84 UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
  85                 "HP",
  86                 "CD-Writer+ CD-4e",
  87                 US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
  88 #endif
  89
  90 /* Reported by Grant Grundler <grundler@parisc-linux.org>
  91  * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
  92  */
  93 UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
  94                 "HP",
  95                 "PhotoSmart R707",
  96                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
  97
  98 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
  99  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
 100  * for USB floppies that need the SINGLE_LUN enforcement.
 101  */
 102 UNUSUAL_DEV(  0x0409, 0x0040, 0x0000, 0x9999,
 103                 "NEC",
 104                 "NEC USB UF000x",
 105                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 106                 US_FL_SINGLE_LUN ),
 107
 108 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
 109 UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 110                 "VIA Technologies Inc.",
 111                 "USB 2.0 Card Reader",
 112                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 113                 US_FL_IGNORE_RESIDUE ),
 114
 115 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 116  * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
 117  * always fails and confuses drive.
 118  */
 119 UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
 120                 "Buffalo",
 121                 "DUB-P40G HDD",
 122                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 123                 US_FL_FIX_INQUIRY ),
 124
 125 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
 126 UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
 127                 "Samsung Info. Systems America, Inc.",
 128                 "MP3 Player",
 129                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 130                 US_FL_IGNORE_RESIDUE ),
 131
 132 /* Reported by Orgad Shaneh <orgads@gmail.com> */
 133 UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
 134                 "Samsung", "MP3 Player",
 135                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 136                 US_FL_IGNORE_RESIDUE ),
 137
 138 /* Reported by Christian Leber <christian@leber.de> */
 139 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
 140                 "TrekStor",
 141                 "i.Beat 115 2.0",
 142                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 143                 US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
 144
 145 /* Reported by Stefan Werner <dustbln@gmx.de> */
 146 UNUSUAL_DEV(  0x0419, 0xaaf6, 0x0100, 0x0100,
 147                 "TrekStor",
 148                 "i.Beat Joy 2.0",
 149                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 150                 US_FL_IGNORE_RESIDUE ),
 151
 152 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
 153 UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 154                 "GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
 155                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 156                 US_FL_IGNORE_RESIDUE ),
 157
 158 /* Reported by Andrew Nayenko <relan@bk.ru> */
 159 UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
 160                 "Nokia",
 161                 "Nokia 6288",
 162                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 163                 US_FL_MAX_SECTORS_64 ),
 164
 165 /* Reported by Mario Rettig <mariorettig@web.de> */
 166 UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
 167                 "Nokia",
 168                 "Nokia 3250",
 169                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 170                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 171
 172 /* Reported by <honkkis@gmail.com> */
 173 UNUSUAL_DEV(  0x0421, 0x0433, 0x0100, 0x0100,
 174                 "Nokia",
 175                 "E70",
 176                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 177                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 178
 179 /* Reported by Jon Hart <Jon.Hart@web.de> */
 180 UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
 181                 "Nokia",
 182                 "E60",
 183                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 184                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 185
 186 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
 187  * Einar Th. Einarsson <einarthered@gmail.com> */
 188 UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
 189                 "Nokia",
 190                 "N91",
 191                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 192                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 193
 194 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
 195  * Rene C. Castberg <Rene@Castberg.org> */
 196 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 197                 "Nokia",
 198                 "N80",
 199                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 200                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 201
 202 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
 203 UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
 204                 "Nokia",
 205                 "E61",
 206                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 207                 US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 208
 209 /* Reported by Bardur Arantsson <bardur@scientician.net> */
 210 UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
 211                 "Nokia",
 212                 "6131",
 213                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 214                 US_FL_MAX_SECTORS_64 ),
 215
 216 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
 217 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
 218                 "Nokia",
 219                 "Nokia 6233",
 220                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 221                 US_FL_MAX_SECTORS_64 ),
 222
 223 /* Reported by Alex Corcoles <alex@corcoles.net> */
 224 UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 225                 "Nokia",
 226                 "6234",
 227                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 228                 US_FL_MAX_SECTORS_64 ),
 229
 230 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 231 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 232                 "SMSC",
 233                 "FDC GOLD-2.30",
 234                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 235                 US_FL_SINGLE_LUN ),
 236
 237 #ifdef CONFIG_USB_STORAGE_DPCM
 238 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 239                 "Microtech",
 240                 "CameraMate (DPCM_USB)",
 241                 US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
 242 #endif
 243
 244 /* Patch submitted by Daniel Drake <dsd@gentoo.org>
 245  * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
 246 UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 247                 "Neuros Audio",
 248                 "USB 2.0 HD 2.5",
 249                 US_SC_DEVICE, US_PR_BULK, NULL,
 250                 US_FL_NEED_OVERRIDE ),
 251
 252 /*
 253  * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
 254  * The key does not actually break, but it returns zero sense which
 255  * makes our SCSI stack to print confusing messages.
 256  */
 257 UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 258                 "USBest Technology",    /* sold by Transcend */
 259                 "USB Mass Storage Device",
 260                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 261
 262 /*
 263 * Bohdan Linda <bohdan.linda@gmail.com>
 264 * 1GB USB sticks MyFlash High Speed. I have restricted
 265 * the revision to my model only
 266 */
 267 UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 268                 "USB 2.0",
 269                 "Flash Disk",
 270                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 271                 US_FL_NOT_LOCKABLE ),
 272
 273 #ifdef CONFIG_USB_STORAGE_KARMA
 274 UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 275                 "Rio",
 276                 "Rio Karma",
 277                 US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 278 #endif
 279
 280 /*
 281  * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
 282  * Reported by Pete Zaitcev <zaitcev@redhat.com>
 283  * This device chokes on both version of MODE SENSE which we have, so
 284  * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
 285  */
 286 UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
 287                 "AMI",
 288                 "Virtual Floppy",
 289                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 290                 US_FL_NO_WP_DETECT),
 291
 292 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 293 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 294                 "Kyocera",
 295                 "Finecam S3x",
 296                 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 297
 298 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 299 UNUSUAL_DEV(  0x0482, 0x0101, 0x0100, 0x0100,
 300                 "Kyocera",
 301                 "Finecam S4",
 302                 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 303
 304 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
 305 UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
 306                 "Kyocera",
 307                 "Finecam S5",
 308                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 309
 310 /* Reported by Paul Stewart <stewart@wetlogic.net>
 311  * This entry is needed because the device reports Sub=ff */
 312 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 313                 "Hitachi",
 314                 "DVD-CAM DZ-MV100A Camcorder",
 315                 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
 316
 317 /* Patch for Nikon coolpix 2000
 318  * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
 319 UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
 320                 "NIKON",
 321                 "NIKON DSC E2000",
 322                 US_SC_DEVICE, US_PR_DEVICE,NULL,
 323                 US_FL_NOT_LOCKABLE ),
 324
 325 /* Reported by Stefan de Konink <skinkie@xs4all.nl> */
 326 UNUSUAL_DEV(  0x04b0, 0x0401, 0x0200, 0x0200,
 327                 "NIKON",
 328                 "NIKON DSC D100",
 329                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 330                 US_FL_FIX_CAPACITY),
 331
 332 /* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
 333 UNUSUAL_DEV(  0x04b0, 0x0409, 0x0100, 0x0100,
 334                 "NIKON",
 335                 "NIKON DSC D50",
 336                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 337                 US_FL_FIX_CAPACITY),
 338
 339 /* Reported by Andreas Bockhold <andreas@bockionline.de> */
 340 UNUSUAL_DEV(  0x04b0, 0x0405, 0x0100, 0x0100,
 341                 "NIKON",
 342                 "NIKON DSC D70",
 343                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 344                 US_FL_FIX_CAPACITY),
 345
 346 /* Reported by Jamie Kitson <jamie@staberinde.fsnet.co.uk> */
 347 UNUSUAL_DEV(  0x04b0, 0x040d, 0x0100, 0x0100,
 348                 "NIKON",
 349                 "NIKON DSC D70s",
 350                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 351                 US_FL_FIX_CAPACITY),
 352
 353 /* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
 354 UNUSUAL_DEV(  0x04b0, 0x040f, 0x0100, 0x0200,
 355                 "NIKON",
 356                 "NIKON DSC D200",
 357                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 358                 US_FL_FIX_CAPACITY),
 359
 360 /* Reported by Emil Larsson <emil@swip.net> */
 361 UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0110,
 362                 "NIKON",
 363                 "NIKON DSC D80",
 364                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 365                 US_FL_FIX_CAPACITY),
 366
 367 /* Reported by Ortwin Glueck <odi@odi.ch> */
 368 UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0110,
 369                 "NIKON",
 370                 "NIKON DSC D40",
 371                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 372                 US_FL_FIX_CAPACITY),
 373
 374 /* Reported by Paul Check <paul@openstreet.com> */
 375 UNUSUAL_DEV(  0x04b0, 0x0415, 0x0100, 0x0100,
 376                 "NIKON",
 377                 "NIKON DSC D2Xs",
 378                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 379                 US_FL_FIX_CAPACITY),
 380
 381 /* Reported by Shan Destromp (shansan@gmail.com) */
 382 UNUSUAL_DEV(  0x04b0, 0x0417, 0x0100, 0x0100,
 383                 "NIKON",
 384                 "NIKON DSC D40X",
 385                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 386                 US_FL_FIX_CAPACITY),
 387
 388 /* Reported by Doug Maxey (dwm@austin.ibm.com) */
 389 UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 390                 "IBM",
 391                 "IBM RSA2",
 392                 US_SC_DEVICE, US_PR_CB, NULL,
 393                 US_FL_MAX_SECTORS_MIN),
 394
 395 /* BENQ DC5330
 396  * Reported by Manuel Fombuena <mfombuena@ya.com> and
 397  * Frank Copeland <fjc@thingy.apana.org.au> */
 398 UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 399                 "Tekom Technologies, Inc",
 400                 "300_CAMERA",
 401                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 402                 US_FL_IGNORE_RESIDUE ),
 403
 404 /* Reported by Simon Levitt <simon@whattf.com>
 405  * This entry needs Sub and Proto fields */
 406 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
 407                 "Epson",
 408                 "875DC Storage",
 409                 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
 410
 411 /* Reported by Khalid Aziz <khalid@gonehiking.org>
 412  * This entry is needed because the device reports Sub=ff */
 413 UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 414                 "Epson",
 415                 "785EPX Storage",
 416                 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
 417
 418 /* Not sure who reported this originally but
 419  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
 420  * flag be added */
 421 UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 422                 "Fujifilm",
 423                 "FinePix 1400Zoom",
 424                 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 425
 426 /* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
 427  * The device needs the flags only.
 428  */
 429 UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
 430                 "ScanLogic",
 431                 "SL11R-IDE",
 432                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 433                 US_FL_FIX_INQUIRY),
 434
 435 /* Reported by Kriston Fincher <kriston@airmail.net>
 436  * Patch submitted by Sean Millichamp <sean@bruenor.org>
 437  * This is to support the Panasonic PalmCam PV-SD4090
 438  * This entry is needed because the device reports Sub=ff
 439  */
 440 UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
 441                 "Panasonic",
 442                 "LS-120 Camera",
 443                 US_SC_UFI, US_PR_DEVICE, NULL, 0),
 444
 445 /* From Yukihiro Nakai, via zaitcev@yahoo.com.
 446  * This is needed for CB instead of CBI */
 447 UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
 448                 "Sharp CE-CW05",
 449                 "CD-R/RW Drive",
 450                 US_SC_8070, US_PR_CB, NULL, 0),
 451
 452 /* Reported by Adriaan Penning <a.penning@luon.net> */
 453 UNUSUAL_DEV(  0x04da, 0x2372, 0x0000, 0x9999,
 454                 "Panasonic",
 455                 "DMC-LCx Camera",
 456                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 457                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 458
 459 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
 460 UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
 461                 "LEICA",
 462                 "D-LUX Camera",
 463                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 464                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 465
 466 /* Most of the following entries were developed with the help of
 467  * Shuttle/SCM directly.
 468  */
 469 UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
 470                 "Matshita",
 471                 "LS-120",
 472                 US_SC_8020, US_PR_CB, NULL, 0),
 473
 474 UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 475                 "Shuttle",
 476                 "eUSCSI Bridge",
 477                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 478                 US_FL_SCM_MULT_TARG ),
 479
 480 #ifdef CONFIG_USB_STORAGE_SDDR09
 481 UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
 482                 "Sandisk",
 483                 "ImageMate SDDR09",
 484                 US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 485                 0),
 486
 487 /* This entry is from Andries.Brouwer@cwi.nl */
 488 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 489                 "SCM Microsystems",
 490                 "eUSB SmartMedia / CompactFlash Adapter",
 491                 US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
 492                 0),
 493 #endif
 494
 495 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
 496 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0100,
 497                 "SCM Microsystems Inc.",
 498                 "eUSB MMC Adapter",
 499                 US_SC_SCSI, US_PR_CB, NULL,
 500                 US_FL_SINGLE_LUN),
 501
 502 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
 503 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0205, 0x0205,
 504                 "Shuttle",
 505                 "eUSB MMC Adapter",
 506                 US_SC_SCSI, US_PR_DEVICE, NULL,
 507                 US_FL_SINGLE_LUN),
 508
 509 UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200,
 510                 "Sony",
 511                 "Hifd",
 512                 US_SC_SCSI, US_PR_CB, NULL,
 513                 US_FL_SINGLE_LUN),
 514
 515 UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200,
 516                 "Shuttle",
 517                 "eUSB ATA/ATAPI Adapter",
 518                 US_SC_8020, US_PR_CB, NULL, 0),
 519
 520 UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
 521                 "Shuttle",
 522                 "eUSB CompactFlash Adapter",
 523                 US_SC_8020, US_PR_CB, NULL, 0),
 524
 525 UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
 526                 "Shuttle",
 527                 "eUSCSI Bridge",
 528                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 529                 US_FL_SCM_MULT_TARG ),
 530
 531 UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
 532                 "Shuttle",
 533                 "eUSCSI Bridge",
 534                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 535                 US_FL_SCM_MULT_TARG ),
 536
 537 UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 538                 "Shuttle",
 539                 "CD-RW Device",
 540                 US_SC_8020, US_PR_CB, NULL, 0),
 541
 542 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
 543  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
 544  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
 545  */
 546
 547 UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
 548                 "Kobian Mercury",
 549                 "Binocam DCB-132",
 550                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 551                 US_FL_BULK32),
 552
 553 #ifdef CONFIG_USB_STORAGE_USBAT
 554 UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
 555                 "Shuttle/SCM",
 556                 "USBAT-02",
 557                 US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
 558                 US_FL_SINGLE_LUN),
 559 #endif
 560
 561 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
 562 UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 563                 "Samsung",
 564                 "YP-U3",
 565                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 566                 US_FL_MAX_SECTORS_64),
 567
 568 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
 569 UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 570                 "Belkin",
 571                 "USB SCSI Adaptor",
 572                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
 573                 US_FL_SCM_MULT_TARG ),
 574
 575 /* Iomega Clik! Drive
 576  * Reported by David Chatenay <dchatenay@hotmail.com>
 577  * The reason this is needed is not fully known.
 578  */
 579 UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
 580                 "Iomega",
 581                 "USB Clik! 40",
 582                 US_SC_8070, US_PR_DEVICE, NULL,
 583                 US_FL_FIX_INQUIRY ),
 584
 585 /* Yakumo Mega Image 37
 586  * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
 587 UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 588                 "Tekom Technologies, Inc",
 589                 "300_CAMERA",
 590                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 591                 US_FL_IGNORE_RESIDUE ),
 592
 593 /* Another Yakumo camera.
 594  * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
 595 UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
 596                 "Tekom Technologies, Inc",
 597                 "300_CAMERA",
 598                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 599                 US_FL_IGNORE_RESIDUE ),
 600
 601 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
 602 UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 603                 "Tekom Technologies, Inc",
 604                 "300_CAMERA",
 605                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 606                 US_FL_IGNORE_RESIDUE ),
 607
 608 /* Yakumo Mega Image 47
 609  * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
 610 UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 611                 "Tekom Technologies, Inc",
 612                 "400_CAMERA",
 613                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 614                 US_FL_IGNORE_RESIDUE ),
 615
 616 /* Reported by Paul Ortyl <ortylp@3miasto.net>
 617  * Note that it's similar to the device above, only different prodID */
 618 UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
 619                 "Tekom Technologies, Inc",
 620                 "400_CAMERA",
 621                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 622                 US_FL_IGNORE_RESIDUE ),
 623
 624 UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 625                 "Sony",
 626                 "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
 627                 US_SC_SCSI, US_PR_DEVICE, NULL,
 628                 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 629
 630 /* Submitted by Lars Jacob <jacob.lars@googlemail.com>
 631  * This entry is needed because the device reports Sub=ff */
 632 UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 633                 "Sony",
 634                 "DSC-T1/T5/H5",
 635                 US_SC_8070, US_PR_DEVICE, NULL,
 636                 US_FL_SINGLE_LUN ),
 637
 638
 639 /* Reported by wim@geeks.nl */
 640 UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
 641                 "Sony",
 642                 "Memorystick NW-MS7",
 643                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 644                 US_FL_SINGLE_LUN ),
 645
 646 #ifdef CONFIG_USB_STORAGE_ISD200
 647 UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
 648                 "Sony",
 649                 "Portable USB Harddrive V2",
 650                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 651                 0 ),
 652 #endif
 653
 654 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
 655 UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
 656                 "Sony",
 657                 "USB Floppy Drive",
 658                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 659                 US_FL_SINGLE_LUN ),
 660
 661 UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100,
 662                 "Sony",
 663                 "Memorystick MSAC-US1",
 664                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 665                 US_FL_SINGLE_LUN ),
 666
 667 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
 668 UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310,
 669                 "Sony",
 670                 "Handycam",
 671                 US_SC_SCSI, US_PR_DEVICE, NULL,
 672                 US_FL_SINGLE_LUN ),
 673
 674 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
 675 UNUSUAL_DEV(  0x054c, 0x002e, 0x0500, 0x0500,
 676                 "Sony",
 677                 "Handycam HC-85",
 678                 US_SC_UFI, US_PR_DEVICE, NULL,
 679                 US_FL_SINGLE_LUN ),
 680
 681 UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
 682                 "Sony",
 683                 "Memorystick MSC-U01N",
 684                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 685                 US_FL_SINGLE_LUN ),
 686
 687 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */
 688 UNUSUAL_DEV(  0x054c, 0x0058, 0x0000, 0x9999,
 689                 "Sony",
 690                 "PEG N760c Memorystick",
 691                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 692                 US_FL_FIX_INQUIRY ),
 693
 694 UNUSUAL_DEV(  0x054c, 0x0069, 0x0000, 0x9999,
 695                 "Sony",
 696                 "Memorystick MSC-U03",
 697                 US_SC_UFI, US_PR_CB, NULL,
 698                 US_FL_SINGLE_LUN ),
 699
 700 /* Submitted by Nathan Babb <nathan@lexi.com> */
 701 UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
 702                 "Sony",
 703                 "PEG Mass Storage",
 704                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 705                 US_FL_FIX_INQUIRY ),
 706
 707 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
 708 UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
 709                 "Sony",
 710                 "PEG Mass Storage",
 711                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 712                 US_FL_FIX_INQUIRY ),
 713
 714 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
 715 UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
 716                 "Sony",
 717                 "PEG Mass Storage",
 718                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 719                 US_FL_FIX_INQUIRY ),
 720
 721 /* floppy reports multiple luns */
 722 UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
 723                 "SAMSUNG",
 724                 "SFD-321U [FW 0C]",
 725                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 726                 US_FL_SINGLE_LUN ),
 727
 728
 729 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 730                 "Y-E Data",
 731                 "Flashbuster-U",
 732                 US_SC_DEVICE,  US_PR_CB, NULL,
 733                 US_FL_SINGLE_LUN),
 734
 735 UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999,
 736                 "Y-E Data",
 737                 "Flashbuster-U",
 738                 US_SC_DEVICE,  US_PR_DEVICE, NULL,
 739                 US_FL_SINGLE_LUN),
 740
 741 /* Reported by Johann Cardon <johann.cardon@free.fr>
 742  * This entry is needed only because the device reports
 743  * bInterfaceClass = 0xff (vendor-specific)
 744  */
 745 UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
 746                 "Y-E Data",
 747                 "Silicon Media R/W",
 748                 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
 749
 750 #ifdef CONFIG_USB_STORAGE_ALAUDA
 751 UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
 752                 "Fujifilm",
 753                 "DPC-R1 (Alauda)",
 754                 US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
 755 #endif
 756
 757 /* Reported by RTE <raszilki@yandex.ru> */
 758 UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
 759                 "JetFlash",
 760                 "TS1GJF2A/120",
 761                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 762                 US_FL_MAX_SECTORS_64 ),
 763
 764 /* Fabrizio Fellini <fello@libero.it> */
 765 UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 766                 "Fujifilm",
 767                 "Digital Camera EX-20 DSC",
 768                 US_SC_8070, US_PR_DEVICE, NULL, 0 ),
 769
 770 /* Reported by Andre Welter <a.r.welter@gmx.de>
 771  * This antique device predates the release of the Bulk-only Transport
 772  * spec, and if it gets a Get-Max-LUN then it requires the host to do a
 773  * Clear-Halt on the bulk endpoints.  The SINGLE_LUN flag will prevent
 774  * us from sending the request.
 775  */
 776 UNUSUAL_DEV(  0x059b, 0x0001, 0x0100, 0x0100,
 777                 "Iomega",
 778                 "ZIP 100",
 779                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 780                 US_FL_SINGLE_LUN ),
 781
 782 /* Reported by <Hendryk.Pfeiffer@gmx.de> */
 783 UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
 784                 "LaCie",
 785                 "DVD+-RW",
 786                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 787                 US_FL_GO_SLOW ),
 788
 789 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
 790  * Some versions of this device need the SubClass and Protocol overrides
 791  * while others don't.
 792  */
 793 UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 794                 "In-System",
 795                 "PyroGate External CD-ROM Enclosure (FCD-523)",
 796                 US_SC_SCSI, US_PR_BULK, NULL,
 797                 US_FL_NEED_OVERRIDE ),
 798
 799 #ifdef CONFIG_USB_STORAGE_ISD200
 800 UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
 801                 "In-System",
 802                 "USB/IDE Bridge (ATA/ATAPI)",
 803                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 804                 0 ),
 805
 806 UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
 807                 "In-System",
 808                 "Portable USB Harddrive V2",
 809                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 810                 0 ),
 811
 812 UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
 813                 "In-System",
 814                 "Portable USB Harddrive V2",
 815                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 816                 0 ),
 817
 818 UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
 819                 "In-System",
 820                 "USB Storage Adapter V2",
 821                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
 822                 0 ),
 823 #endif
 824
 825 /* Submitted by Sven Anderson <sven-linux@anderson.de>
 826  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
 827  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
 828  * to change with firmware updates, I changed the range to maximum for all
 829  * iPod entries.
 830  */
 831 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
 832                 "Apple",
 833                 "iPod",
 834                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 835                 US_FL_FIX_CAPACITY ),
 836
 837 /* Reported by Avi Kivity <avi@argo.co.il> */
 838 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
 839                 "Apple",
 840                 "iPod",
 841                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 842                 US_FL_FIX_CAPACITY ),
 843
 844 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
 845                 "Apple",
 846                 "iPod",
 847                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 848                 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 849
 850 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
 851                 "Apple",
 852                 "iPod",
 853                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 854                 US_FL_FIX_CAPACITY ),
 855
 856 /*
 857  * Reported by Tyson Vinson <lornoss@gmail.com>
 858  * This particular productId is the iPod Nano
 859  */
 860 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
 861                 "Apple",
 862                 "iPod",
 863                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 864                 US_FL_FIX_CAPACITY ),
 865
 866 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
 867 UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
 868                 "Lexar",
 869                 "Jumpshot USB CF Reader",
 870                 US_SC_SCSI, US_PR_JUMPSHOT, NULL,
 871                 US_FL_NEED_OVERRIDE ),
 872 #endif
 873
 874 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 875 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 876                 "Lexar",
 877                 "USB CF Reader",
 878                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 879                 US_FL_FIX_INQUIRY ),
 880
 881 /* The following two entries are for a Genesys USB to IDE
 882  * converter chip, but it changes its ProductId depending
 883  * on whether or not a disk or an optical device is enclosed
 884  * They were originally reported by Alexander Oltu
 885  * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
 886  * respectively.
 887  *
 888  * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
 889  * <phil@ipom.com> as these flags were made and hard-coded
 890  * special-cases were pulled from scsiglue.c.
 891  */
 892 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 893                 "Genesys Logic",
 894                 "USB to IDE Optical",
 895                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 896                 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 897
 898 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 899                 "Genesys Logic",
 900                 "USB to IDE Disk",
 901                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 902                 US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 903
 904 /* Reported by Hanno Boeck <hanno@gmx.de>
 905  * Taken from the Lycoris Kernel */
 906 UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
 907                 "Vivitar",
 908                 "Vivicam 35Xx",
 909                 US_SC_SCSI, US_PR_BULK, NULL,
 910                 US_FL_FIX_INQUIRY ),
 911
 912 UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 913                 "TEAC",
 914                 "Floppy Drive",
 915                 US_SC_UFI, US_PR_CB, NULL, 0 ),
 916
 917 #ifdef CONFIG_USB_STORAGE_SDDR09
 918 UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
 919                 "Olympus",
 920                 "Camedia MAUSB-2",
 921                 US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 922                 0),
 923 #endif
 924
 925 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 926 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 927                 "SigmaTel",
 928                 "USBMSC Audio Player",
 929                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 930                 US_FL_FIX_CAPACITY ),
 931
 932 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
 933 UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
 934                 "Prolific Technology Inc.",
 935                 "Mass Storage Device",
 936                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 937                 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
 938
 939 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
 940 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
 941                 "Prolific Technology Inc.",
 942                 "ATAPI-6 Bridge Controller",
 943                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 944                 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
 945
 946 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */
 947 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
 948                 "Minolta",
 949                 "Dimage F300",
 950                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 951
 952 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
 953 UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
 954                 "Minolta",
 955                 "DIMAGE E223",
 956                 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
 957
 958 UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
 959                 "Hagiwara",
 960                 "Flashgate",
 961                 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
 962
 963 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */
 964 UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 965                 "Thomson Multimedia Inc.",
 966                 "RCA RD1080 MP3 Player",
 967                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 968                 US_FL_FIX_CAPACITY ),
 969
 970 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
 971  * This USB MP3/AVI player device fails and disconnects if more than 128
 972  * sectors (64kB) are read/written in a single command, and may be present
 973  * at least in the following products:
 974  *   "Magnex Digital Video Panel DVP 1800"
 975  *   "MP4 AIGO 4GB SLOT SD"
 976  *   "Teclast TL-C260 MP3"
 977  *   "i.Meizu PMP MP3/MP4"
 978  *   "Speed MV8 MP4 Audio Player"
 979  */
 980 UNUSUAL_DEV(  0x071b, 0x3203, 0x0100, 0x0100,
 981                 "RockChip",
 982                 "ROCK MP3",
 983                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 984                 US_FL_MAX_SECTORS_64),
 985
 986 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */
 987 UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
 988                 "ATMEL",
 989                 "SND1 Storage",
 990                 US_SC_DEVICE, US_PR_DEVICE, NULL,
 991                 US_FL_IGNORE_RESIDUE),
 992
 993 /* Submitted by Roman Hodek <roman@hodek.net> */
 994 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
 995                 "Sandisk",
 996                 "ImageMate SDDR-05a",
 997                 US_SC_SCSI, US_PR_CB, NULL,
 998                 US_FL_SINGLE_LUN ),
 999
1000 UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
1001                 "SanDisk Corporation",
1002                 "ImageMate CompactFlash USB",
1003                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1004                 US_FL_FIX_CAPACITY ),
1005
1006 #ifdef CONFIG_USB_STORAGE_USBAT
1007 UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
1008                 "Sandisk",
1009                 "ImageMate SDDR-05b",
1010                 US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
1011                 US_FL_SINGLE_LUN ),
1012 #endif
1013
1014 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
1015                 "Sandisk",
1016                 "ImageMate SDDR-12",
1017                 US_SC_SCSI, US_PR_CB, NULL,
1018                 US_FL_SINGLE_LUN ),
1019
1020 #ifdef CONFIG_USB_STORAGE_SDDR09
1021 UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
1022                 "Sandisk",
1023                 "ImageMate SDDR-09",
1024                 US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
1025                 0),
1026 #endif
1027
1028 #ifdef CONFIG_USB_STORAGE_FREECOM
1029 UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
1030                 "Freecom",
1031                 "USB-IDE",
1032                 US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
1033 #endif
1034
1035 /* Reported by Eero Volotinen <eero@ping-viini.org> */
1036 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
1037                 "Freecom Technologies",
1038                 "FHD-Classic",
1039                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1040                 US_FL_FIX_CAPACITY),
1041
1042 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
1043                 "Microtech",
1044                 "USB-SCSI-DB25",
1045                 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
1046                 US_FL_SCM_MULT_TARG ),
1047
1048 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
1049                 "Microtech",
1050                 "USB-SCSI-HD50",
1051                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
1052                 US_FL_SCM_MULT_TARG ),
1053
1054 #ifdef CONFIG_USB_STORAGE_DPCM
1055 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
1056                 "Microtech",
1057                 "CameraMate (DPCM_USB)",
1058                 US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
1059 #endif
1060
1061 #ifdef CONFIG_USB_STORAGE_ALAUDA
1062 UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
1063                 "Olympus",
1064                 "MAUSB-10 (Alauda)",
1065                 US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
1066 #endif
1067
1068 #ifdef CONFIG_USB_STORAGE_DATAFAB
1069 UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
1070                 "Datafab",
1071                 "MDCFE-B USB CF Reader",
1072                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1073                 0 ),
1074
1075 /*
1076  * The following Datafab-based devices may or may not work
1077  * using the current driver...the 0xffff is arbitrary since I
1078  * don't know what device versions exist for these guys.
1079  *
1080  * The 0xa003 and 0xa004 devices in particular I'm curious about.
1081  * I'm told they exist but so far nobody has come forward to say that
1082  * they work with this driver.  Given the success we've had getting
1083  * other Datafab-based cards operational with this driver, I've decided
1084  * to leave these two devices in the list.
1085  */
1086 UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
1087                 "SIIG/Datafab",
1088                 "SIIG/Datafab Memory Stick+CF Reader/Writer",
1089                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1090                 0 ),
1091
1092 /* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
1093 UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
1094                 "Datafab/Unknown",
1095                 "MD2/MD3 Disk enclosure",
1096                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1097                 US_FL_SINGLE_LUN ),
1098
1099 UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
1100                 "Datafab/Unknown",
1101                 "Datafab-based Reader",
1102                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1103                 0 ),
1104
1105 UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
1106                 "Datafab/Unknown",
1107                 "Datafab-based Reader",
1108                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1109                 0 ),
1110
1111 UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
1112                 "PNY/Datafab",
1113                 "PNY/Datafab CF+SM Reader",
1114                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1115                 0 ),
1116
1117 UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
1118                 "Simple Tech/Datafab",
1119                 "Simple Tech/Datafab CF+SM Reader",
1120                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1121                 0 ),
1122 #endif
1123
1124 #ifdef CONFIG_USB_STORAGE_SDDR55
1125 /* Contributed by Peter Waechtler */
1126 UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
1127                 "Datafab",
1128                 "MDSM-B reader",
1129                 US_SC_SCSI, US_PR_SDDR55, NULL,
1130                 US_FL_FIX_INQUIRY ),
1131 #endif
1132
1133 #ifdef CONFIG_USB_STORAGE_DATAFAB
1134 /* Submitted by Olaf Hering <olh@suse.de> */
1135 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
1136                 "Datafab Systems, Inc.",
1137                 "USB to CF + SM Combo (LC1)",
1138                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1139                 0 ),
1140 #endif
1141 #ifdef CONFIG_USB_STORAGE_SDDR55
1142 /* SM part - aeb <Andries.Brouwer@cwi.nl> */
1143 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
1144                 "Datafab Systems, Inc.",
1145                 "USB to CF + SM Combo (LC1)",
1146                 US_SC_SCSI, US_PR_SDDR55, NULL,
1147                 US_FL_SINGLE_LUN ),
1148 #endif
1149
1150 #ifdef CONFIG_USB_STORAGE_DATAFAB
1151 /* Reported by Felix Moeller <felix@derklecks.de>
1152  * in Germany this is sold by Hama with the productnumber 46952
1153  * as "DualSlot CompactFlash(TM) & MStick Drive USB"
1154  */
1155 UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
1156                 "DataFab Systems Inc.",
1157                 "USB CF+MS",
1158                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1159                 0 ),
1160
1161 #endif
1162
1163 /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
1164  * Only revision 1.13 tested (same for all of the above devices,
1165  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
1166  * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
1167  * See also http://martin.wilck.bei.t-online.de/#kecf .
1168  */
1169 UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
1170                 "Datafab",
1171                 "KECF-USB",
1172                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1173                 US_FL_FIX_INQUIRY ),
1174
1175 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
1176  * to the USB storage specification in two ways:
1177  * - They tell us they are using transport protocol CBI. In reality they
1178  *   are using transport protocol CB.
1179  * - They don't like the INQUIRY command. So we must handle this command
1180  *   of the SCSI layer ourselves.
1181  * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
1182  *   bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
1183  *   So don't remove the US_PR_CB override!
1184  * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
1185  */
1186 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
1187                 "Casio",
1188                 "QV DigitalCamera",
1189                 US_SC_8070, US_PR_CB, NULL,
1190                 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
1191
1192 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
1193 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
1194                 "Samsung",
1195                 "Digimax 410",
1196                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1197                 US_FL_FIX_INQUIRY),
1198
1199 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
1200  * Flag will support Bulk devices which use a standards-violating 32-byte
1201  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
1202  * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
1203  */
1204
1205 UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
1206                 "Grandtech",
1207                 "DC2MEGA",
1208                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1209                 US_FL_BULK32),
1210
1211 /* Andrew Lunn <andrew@lunn.ch>
1212  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
1213  * on LUN 4.
1214  * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
1215 */
1216 UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
1217                 "PanDigital",
1218                 "Photo Frame",
1219                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1220                 US_FL_NOT_LOCKABLE),
1221
1222 /* Submitted by Jan De Luyck <lkml@kcore.org> */
1223 UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
1224                 "CITIZEN",
1225                 "X1DE-USB",
1226                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1227                 US_FL_SINGLE_LUN),
1228
1229 /* Submitted by Dylan Taft <d13f00l@gmail.com>
1230  * US_FL_IGNORE_RESIDUE Needed
1231  */
1232 UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
1233                 "AIPTEK",
1234                 "Aiptek USB Keychain MP3 Player",
1235                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1236                 US_FL_IGNORE_RESIDUE),
1237
1238 /* Entry needed for flags. Moreover, all devices with this ID use
1239  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
1240  * One example is "Trumpion Digital Research MYMP3".
1241  * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
1242  */
1243 UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
1244                 "Trumpion",
1245                 "t33520 USB Flash Card Controller",
1246                 US_SC_DEVICE, US_PR_BULK, NULL,
1247                 US_FL_NEED_OVERRIDE ),
1248
1249 /* Reported by Filippo Bardelli <filibard@libero.it>
1250  * The device reports a subclass of RBC, which is wrong.
1251  */
1252 UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
1253                 "Trumpion Microelectronics, Inc.",
1254                 "33520 USB Digital Voice Recorder",
1255                 US_SC_UFI, US_PR_DEVICE, NULL,
1256                 0),
1257
1258 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
1259 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
1260                 "Trumpion",
1261                 "MP3 player",
1262                 US_SC_RBC, US_PR_BULK, NULL,
1263                 0 ),
1264
1265 /* aeb */
1266 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
1267                 "Feiya",
1268                 "5-in-1 Card Reader",
1269                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1270                 US_FL_FIX_CAPACITY ),
1271
1272 /* This Pentax still camera is not conformant
1273  * to the USB storage specification: -
1274  * - It does not like the INQUIRY command. So we must handle this command
1275  *   of the SCSI layer ourselves.
1276  * Tested on Rev. 10.00 (0x1000)
1277  * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
1278  */
1279 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
1280                 "Pentax",
1281                 "Optio 2/3/400",
1282                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1283                 US_FL_FIX_INQUIRY ),
1284
1285
1286 /* Submitted by Per Winkvist <per.winkvist@uk.com> */
1287 UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
1288                 "Pentax",
1289                 "Optio S/S4",
1290                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1291                 US_FL_FIX_INQUIRY ),
1292
1293 /* These are virtual windows driver CDs, which the zd1211rw driver
1294  * automatically converts into WLAN devices. */
1295 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
1296                 "ZyXEL",
1297                 "G-220F USB-WLAN Install",
1298                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1299                 US_FL_IGNORE_DEVICE ),
1300
1301 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
1302                 "SiteCom",
1303                 "WL-117 USB-WLAN Install",
1304                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1305                 US_FL_IGNORE_DEVICE ),
1306
1307 #ifdef CONFIG_USB_STORAGE_ISD200
1308 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
1309                 "ATI",
1310                 "USB Cable 205",
1311                 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
1312                 0 ),
1313 #endif
1314
1315 #ifdef CONFIG_USB_STORAGE_DATAFAB
1316 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
1317                 "Acomdata",
1318                 "CF",
1319                 US_SC_SCSI, US_PR_DATAFAB, NULL,
1320                 US_FL_SINGLE_LUN ),
1321 #endif
1322 #ifdef CONFIG_USB_STORAGE_SDDR55
1323 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
1324                 "Acomdata",
1325                 "SM",
1326                 US_SC_SCSI, US_PR_SDDR55, NULL,
1327                 US_FL_SINGLE_LUN ),
1328 #endif
1329
1330 /* Submitted by: Nick Sillik <n.sillik@temple.edu>
1331  * Needed for OneTouch extension to usb-storage
1332  *
1333  */
1334 #ifdef CONFIG_USB_STORAGE_ONETOUCH
1335         UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
1336                         "Maxtor",
1337                         "OneTouch External Harddrive",
1338                         US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
1339                         0),
1340         UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
1341                         "Maxtor",
1342                         "OneTouch External Harddrive",
1343                         US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
1344                         0),
1345 #endif
1346
1347 /*
1348  * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
1349  * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
1350  */
1351 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
1352                 "Unknown",
1353                 "Unknown",
1354                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1355                 US_FL_SINGLE_LUN ),
1356
1357 /* Submitted by Joris Struyve <joris@struyve.be> */
1358 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
1359                 "Medion",
1360                 "MD 7425",
1361                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1362                 US_FL_FIX_INQUIRY),
1363
1364 /* Reported by Rohan Hart <rohan.hart17@gmail.com> */
1365 UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
1366                 "INTOVA",
1367                 "Pixtreme",
1368                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1369                 US_FL_FIX_CAPACITY ),
1370
1371 /*
1372  * Entry for Jenoptik JD 5200z3
1373  *
1374  * email: car.busse@gmx.de
1375  */
1376 UNUSUAL_DEV(  0x0d96, 0x5200, 0x0001, 0x0200,
1377                 "Jenoptik",
1378                 "JD 5200 z3",
1379                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
1380
1381 /* Reported by Lubomir Blaha <tritol@trilogic.cz>
1382  * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
1383  * works for me. Can anybody correct these values? (I able to test corrected
1384  * version.)
1385  */
1386 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
1387                 "Netac",
1388                 "USB-CF-Card",
1389                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1390                 US_FL_FIX_INQUIRY ),
1391
1392 /* Reported by Edward Chapman (taken from linux-usb mailing list)
1393    Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
1394 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
1395                 "Netac",
1396                 "USB Flash Disk",
1397                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1398                 US_FL_IGNORE_RESIDUE ),
1399
1400
1401 /* Patch by Stephan Walter <stephan.walter@epfl.ch>
1402  * I don't know why, but it works... */
1403 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
1404                 "WINWARD",
1405                 "Music Disk",
1406                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1407                 US_FL_IGNORE_RESIDUE ),
1408
1409 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */
1410 UNUSUAL_DEV(  0x0dda, 0x0301, 0x0012, 0x0012,
1411                 "PNP_MP3",
1412                 "PNP_MP3 PLAYER",
1413                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1414                 US_FL_IGNORE_RESIDUE ),
1415
1416 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
1417 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
1418                 "Cowon Systems",
1419                 "iAUDIO M5",
1420                 US_SC_DEVICE, US_PR_BULK, NULL,
1421                 US_FL_NEED_OVERRIDE ),
1422
1423 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
1424 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
1425                 "USB",
1426                 "Solid state disk",
1427                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1428                 US_FL_FIX_INQUIRY ),
1429
1430 /* Submitted by Daniel Drake <dsd@gentoo.org>
1431  * Reported by dayul on the Gentoo Forums */
1432 UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
1433                 "Ours Technology",
1434                 "Flash Disk",
1435                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1436                 US_FL_IGNORE_RESIDUE ),
1437
1438 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
1439 UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
1440                 "USB",
1441                 "Flash Disk",
1442                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1443                 US_FL_IGNORE_RESIDUE ),
1444
1445 /* Reported by Benjamin Schiller <sbenni@gmx.de>
1446  * It is also sold by Easylite as DJ 20 */
1447 UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
1448                 "Typhoon",
1449                 "My DJ 1820",
1450                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1451                 US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
1452
1453 /* Patch by Leonid Petrov mail at lpetrov.net
1454  * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
1455  * http://www.qbik.ch/usb/devices/showdev.php?id=1705
1456  * Updated to 103 device by MJ Ray mjr at phonecoop.coop
1457  */
1458 UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
1459                 "Oracom Co., Ltd",
1460                 "ORC-200M",
1461                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1462                 US_FL_IGNORE_RESIDUE ),
1463
1464 /* David Kuehling <dvdkhlng@gmx.de>:
1465  * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
1466  * errors when trying to write.
1467  */
1468 UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
1469                 "C-MEX",
1470                 "A-VOX",
1471                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1472                 US_FL_IGNORE_RESIDUE ),
1473
1474 /* Jeremy Katz <katzj@redhat.com>:
1475  * The Blackberry Pearl can run in two modes; a usb-storage only mode
1476  * and a mode that allows access via mass storage and to its database.
1477  * The berry_charge module will set the device to dual mode and thus we
1478  * should ignore its native mode if that module is built
1479  */
1480 #ifdef CONFIG_USB_BERRY_CHARGE
1481 UNUSUAL_DEV(  0x0fca, 0x0006, 0x0001, 0x0001,
1482                 "RIM",
1483                 "Blackberry Pearl",
1484                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1485                 US_FL_IGNORE_DEVICE ),
1486 #endif
1487
1488 /* Reported by Michael Stattmann <michael@stattmann.com> */
1489 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
1490                 "Sony Ericsson",
1491                 "V800-Vodafone 802",
1492                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1493                 US_FL_NO_WP_DETECT ),
1494
1495 /* Reported by Jan Mate <mate@fiit.stuba.sk>
1496  * and by Soeren Sonnenburg <kernel@nn7.de> */
1497 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
1498                 "Sony Ericsson",
1499                 "P990i",
1500                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1501                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1502
1503 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */
1504 UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
1505                 "Sony Ericsson",
1506                 "P1i",
1507                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1508                 US_FL_IGNORE_RESIDUE ),
1509
1510 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
1511 UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
1512                 "Sony Ericsson",
1513                 "M600i",
1514                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1515                 US_FL_FIX_CAPACITY ),
1516
1517 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
1518  * Tested on hardware version 1.10.
1519  * Entry is needed only for the initializer function override.
1520  * Devices with bcd > 110 seem to not need it while those
1521  * with bcd < 110 appear to need it.
1522  */
1523 UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x0110,
1524                 "Desknote",
1525                 "UCR-61S2B",
1526                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
1527                 0 ),
1528
1529 /* Reported by Fabio Venturi <f.venturi@tdnet.it>
1530  * The device reports a vendor-specific bDeviceClass.
1531  */
1532 UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
1533                 "Actions Semiconductor",
1534                 "Mtp device",
1535                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1536                 0),
1537
1538 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
1539  * Entry is needed for the initializer function override,
1540  * which instructs the device to load as a modem
1541  * device.
1542  */
1543 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
1544                 "Sierra Wireless",
1545                 "USB MMC Storage",
1546                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1547                 US_FL_IGNORE_DEVICE),
1548
1549 /* Reported by Jaco Kroon <jaco@kroon.co.za>
1550  * The usb-storage module found on the Digitech GNX4 (and supposedly other
1551  * devices) misbehaves and causes a bunch of invalid I/O errors.
1552  */
1553 UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
1554                 "Digitech HMG",
1555                 "DigiTech Mass Storage",
1556                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1557                 US_FL_IGNORE_RESIDUE ),
1558
1559 /* Reported by fangxiaozhi <huananhu@huawei.com>
1560  * This brings the HUAWEI data card devices into multi-port mode
1561  */
1562 UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
1563                 "HUAWEI MOBILE",
1564                 "Mass Storage",
1565                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1566                 0),
1567 UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
1568                 "HUAWEI MOBILE",
1569                 "Mass Storage",
1570                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1571                 0),
1572 UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
1573                 "HUAWEI MOBILE",
1574                 "Mass Storage",
1575                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1576                 0),
1577 UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
1578                 "HUAWEI MOBILE",
1579                 "Mass Storage",
1580                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1581                 0),
1582 UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
1583                 "HUAWEI MOBILE",
1584                 "Mass Storage",
1585                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1586                 0),
1587 UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
1588                 "HUAWEI MOBILE",
1589                 "Mass Storage",
1590                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1591                 0),
1592 UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
1593                 "HUAWEI MOBILE",
1594                 "Mass Storage",
1595                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1596                 0),
1597 UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
1598                 "HUAWEI MOBILE",
1599                 "Mass Storage",
1600                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1601                 0),
1602 UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
1603                 "HUAWEI MOBILE",
1604                 "Mass Storage",
1605                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1606                 0),
1607 UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
1608                 "HUAWEI MOBILE",
1609                 "Mass Storage",
1610                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1611                 0),
1612 UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
1613                 "HUAWEI MOBILE",
1614                 "Mass Storage",
1615                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1616                 0),
1617 UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
1618                 "HUAWEI MOBILE",
1619                 "Mass Storage",
1620                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1621                 0),
1622 UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
1623                 "HUAWEI MOBILE",
1624                 "Mass Storage",
1625                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1626                 0),
1627 UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
1628                 "HUAWEI MOBILE",
1629                 "Mass Storage",
1630                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1631                 0),
1632 UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
1633                 "HUAWEI MOBILE",
1634                 "Mass Storage",
1635                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1636                 0),
1637 UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
1638                 "HUAWEI MOBILE",
1639                 "Mass Storage",
1640                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1641                 0),
1642 UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
1643                 "HUAWEI MOBILE",
1644                 "Mass Storage",
1645                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1646                 0),
1647 UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
1648                 "HUAWEI MOBILE",
1649                 "Mass Storage",
1650                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1651                 0),
1652 UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
1653                 "HUAWEI MOBILE",
1654                 "Mass Storage",
1655                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
1656                 0),
1657
1658 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
1659 UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
1660                 "Minolta",
1661                 "Dimage Z10",
1662                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1663                 0 ),
1664
1665 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
1666 UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
1667                 "SWISSBIT",
1668                 "Black Silver",
1669                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1670                 US_FL_IGNORE_RESIDUE ),
1671
1672 /* Reported by Francesco Foresti <frafore@tiscali.it> */
1673 UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
1674                 "Super Top",
1675                 "IDE DEVICE",
1676                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1677                 US_FL_IGNORE_RESIDUE ),
1678
1679 /* Reported by Robert Schedel <r.schedel@yahoo.de>
1680  * Note: this is a 'super top' device like the above 14cd/6600 device */
1681 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
1682                 "Teac",
1683                 "HD-35PUK-B",
1684                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1685                 US_FL_IGNORE_RESIDUE ),
1686
1687 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
1688  * and Renato Perini <rperini@email.it>
1689  */
1690 UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
1691                 "Motorola",
1692                 "RAZR V3x",
1693                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1694                 US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
1695
1696 /*
1697  * Patch by Pete Zaitcev <zaitcev@redhat.com>
1698  * Report by Mark Patton. Red Hat bz#208928.
1699  */
1700 UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0001,
1701                 "Motorola",
1702                 "RAZR V3i",
1703                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1704                 US_FL_FIX_CAPACITY),
1705
1706 /*
1707  * Patch by Constantin Baranov <const@tltsu.ru>
1708  * Report by Andreas Koenecke.
1709  * Motorola ROKR Z6.
1710  */
1711 UNUSUAL_DEV(  0x22b8, 0x6426, 0x0101, 0x0101,
1712                 "Motorola",
1713                 "MSnc.",
1714                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1715                 US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
1716
1717 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
1718 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
1719                 "MPIO",
1720                 "HS200",
1721                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1722                 US_FL_GO_SLOW ),
1723
1724 /*
1725  * David Härdeman <david@2gen.com>
1726  * The key makes the SCSI stack print confusing (but harmless) messages
1727  */
1728 UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
1729                 "Iomega",
1730                 "Micro Mini 1GB",
1731                 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
1732
1733 #ifdef CONFIG_USB_STORAGE_SDDR55
1734 UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
1735                 "Sandisk",
1736                 "ImageMate SDDR55",
1737                 US_SC_SCSI, US_PR_SDDR55, NULL,
1738                 US_FL_SINGLE_LUN),
1739 #endif
1740
1741 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
1742 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
1743                 "DataStor",
1744                 "USB4500 FW1.04",
1745                 US_SC_DEVICE, US_PR_DEVICE, NULL,
1746                 US_FL_CAPACITY_HEURISTICS),
1747
1748 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
1749 UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
1750                 "Cypress",
1751                 "Cypress AT2LP",
1752                 US_SC_CYP_ATACB, US_PR_BULK, NULL,
1753                 0),
1754 #endif
1755
1756 /* Control/Bulk transport for all SubClass values */
1757 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
1758 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
1759 USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
1760 USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
1761 USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
1762 USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
1763
1764 /* Control/Bulk/Interrupt transport for all SubClass values */
1765 USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
1766 USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
1767 USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
1768 USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
1769 USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
1770 USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
1771
1772 /* Bulk-only transport for all SubClass values */
1773 USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
1774 USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
1775 USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
1776 USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
1777 USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
1778 USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),