agk-dm-dm-crypt-tidy-crypt_endio

[linux-2.6/linux-trees-mm.git] / drivers / scsi / qla4xxx / ql4_mbx.c

/*
 * QLogic iSCSI HBA Driver
 * Copyright (c)  2003-2006 QLogic Corporation
 *
 * See LICENSE.qla4xxx for copyright and licensing details.
 */

#include "ql4_def.h"
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"


/**
 * qla4xxx_mailbox_command - issues mailbox commands
 * @ha: Pointer to host adapter structure.
 * @inCount: number of mailbox registers to load.
 * @outCount: number of mailbox registers to return.
 * @mbx_cmd: data pointer for mailbox in registers.
 * @mbx_sts: data pointer for mailbox out registers.
 *
 * This routine sssue mailbox commands and waits for completion.
 * If outCount is 0, this routine completes successfully WITHOUT waiting
 * for the mailbox command to complete.
 **/
static int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
                                   uint8_t outCount, uint32_t *mbx_cmd,
                                   uint32_t *mbx_sts)
{
        int status = QLA_ERROR;
        uint8_t i;
        u_long wait_count;
        uint32_t intr_status;
        unsigned long flags = 0;

        /* Make sure that pointers are valid */
        if (!mbx_cmd || !mbx_sts) {
                DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
                              "pointer\n", ha->host_no, __func__));
                return status;
        }
        /* Mailbox code active */
        wait_count = MBOX_TOV * 100;

        while (wait_count--) {
                mutex_lock(&ha->mbox_sem);
                if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) {
                        set_bit(AF_MBOX_COMMAND, &ha->flags);
                        mutex_unlock(&ha->mbox_sem);
                        break;
                }
                mutex_unlock(&ha->mbox_sem);
                if (!wait_count) {
                        DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
                                ha->host_no, __func__));
                        return status;
                }
                msleep(10);
        }

        /* To prevent overwriting mailbox registers for a command that has
         * not yet been serviced, check to see if a previously issued
         * mailbox command is interrupting.
         * -----------------------------------------------------------------
         */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        intr_status = readl(&ha->reg->ctrl_status);
        if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
                /* Service existing interrupt */
                qla4xxx_interrupt_service_routine(ha, intr_status);
                clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
        }

        /* Send the mailbox command to the firmware */
        ha->mbox_status_count = outCount;
        for (i = 0; i < outCount; i++)
                ha->mbox_status[i] = 0;

        /* Load all mailbox registers, except mailbox 0. */
        for (i = 1; i < inCount; i++)
                writel(mbx_cmd[i], &ha->reg->mailbox[i]);

        /* Wakeup firmware  */
        writel(mbx_cmd[0], &ha->reg->mailbox[0]);
        readl(&ha->reg->mailbox[0]);
        writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status);
        readl(&ha->reg->ctrl_status);
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

        /* Wait for completion */

        /*
         * If we don't want status, don't wait for the mailbox command to
         * complete.  For example, MBOX_CMD_RESET_FW doesn't return status,
         * you must poll the inbound Interrupt Mask for completion.
         */
        if (outCount == 0) {
                status = QLA_SUCCESS;
                goto mbox_exit;
        }
        /* Wait for command to complete */
        wait_count = jiffies + MBOX_TOV * HZ;
        while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
                if (time_after_eq(jiffies, wait_count))
                        break;

                spin_lock_irqsave(&ha->hardware_lock, flags);
                intr_status = readl(&ha->reg->ctrl_status);
                if (intr_status & INTR_PENDING) {
                        /*
                         * Service the interrupt.
                         * The ISR will save the mailbox status registers
                         * to a temporary storage location in the adapter
                         * structure.
                         */
                        ha->mbox_status_count = outCount;
                        qla4xxx_interrupt_service_routine(ha, intr_status);
                }
                spin_unlock_irqrestore(&ha->hardware_lock, flags);
                msleep(10);
        }

        /* Check for mailbox timeout. */
        if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
                DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
                              " Scheduling Adapter Reset\n", ha->host_no,
                              mbx_cmd[0]));
                ha->mailbox_timeout_count++;
                mbx_sts[0] = (-1);
                set_bit(DPC_RESET_HA, &ha->dpc_flags);
                goto mbox_exit;
        }

        /*
         * Copy the mailbox out registers to the caller's mailbox in/out
         * structure.
         */
        spin_lock_irqsave(&ha->hardware_lock, flags);
        for (i = 0; i < outCount; i++)
                mbx_sts[i] = ha->mbox_status[i];

        /* Set return status and error flags (if applicable). */
        switch (ha->mbox_status[0]) {
        case MBOX_STS_COMMAND_COMPLETE:
                status = QLA_SUCCESS;
                break;

        case MBOX_STS_INTERMEDIATE_COMPLETION:
                status = QLA_SUCCESS;
                break;

        case MBOX_STS_BUSY:
                DEBUG2( printk("scsi%ld: %s: Cmd = %08X, ISP BUSY\n",
                               ha->host_no, __func__, mbx_cmd[0]));
                ha->mailbox_timeout_count++;
                break;

        default:
                DEBUG2(printk("scsi%ld: %s: **** FAILED, cmd = %08X, "
                              "sts = %08X ****\n", ha->host_no, __func__,
                              mbx_cmd[0], mbx_sts[0]));
                break;
        }
        spin_unlock_irqrestore(&ha->hardware_lock, flags);

mbox_exit:
        mutex_lock(&ha->mbox_sem);
        clear_bit(AF_MBOX_COMMAND, &ha->flags);
        mutex_unlock(&ha->mbox_sem);
        clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);

        return status;
}

/**
 * qla4xxx_initialize_fw_cb - initializes firmware control block.
 * @ha: Pointer to host adapter structure.
 **/
int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
{
        struct init_fw_ctrl_blk *init_fw_cb;
        dma_addr_t init_fw_cb_dma;
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];
        int status = QLA_ERROR;

        init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
                                        sizeof(struct init_fw_ctrl_blk),
                                        &init_fw_cb_dma, GFP_KERNEL);
        if (init_fw_cb == NULL) {
                DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
                              ha->host_no, __func__));
                return 10;
        }
        memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));

        /* Get Initialize Firmware Control Block. */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
        mbox_cmd[2] = LSDW(init_fw_cb_dma);
        mbox_cmd[3] = MSDW(init_fw_cb_dma);
        mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                dma_free_coherent(&ha->pdev->dev,
                                  sizeof(struct init_fw_ctrl_blk),
                                  init_fw_cb, init_fw_cb_dma);
                return status;
        }

        /* Initialize request and response queues. */
        qla4xxx_init_rings(ha);

        /* Fill in the request and response queue information. */
        init_fw_cb->pri.rqq_consumer_idx = cpu_to_le16(ha->request_out);
        init_fw_cb->pri.compq_producer_idx = cpu_to_le16(ha->response_in);
        init_fw_cb->pri.rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
        init_fw_cb->pri.compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
        init_fw_cb->pri.rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma));
        init_fw_cb->pri.rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma));
        init_fw_cb->pri.compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma));
        init_fw_cb->pri.compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma));
        init_fw_cb->pri.shdwreg_addr_lo =
                cpu_to_le32(LSDW(ha->shadow_regs_dma));
        init_fw_cb->pri.shdwreg_addr_hi =
                cpu_to_le32(MSDW(ha->shadow_regs_dma));

        /* Set up required options. */
        init_fw_cb->pri.fw_options |=
                __constant_cpu_to_le16(FWOPT_SESSION_MODE |
                                       FWOPT_INITIATOR_MODE);
        init_fw_cb->pri.fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);

        /* Save some info in adapter structure. */
        ha->firmware_options = le16_to_cpu(init_fw_cb->pri.fw_options);
        ha->tcp_options = le16_to_cpu(init_fw_cb->pri.ipv4_tcp_opts);
        ha->heartbeat_interval = init_fw_cb->pri.hb_interval;
        memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr,
               min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr)));
        memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet,
               min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet)));
        memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr,
               min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr)));
        memcpy(ha->name_string, init_fw_cb->pri.iscsi_name,
               min(sizeof(ha->name_string),
                   sizeof(init_fw_cb->pri.iscsi_name)));
        /*memcpy(ha->alias, init_fw_cb->Alias,
               min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/

        /* Save Command Line Paramater info */
        ha->port_down_retry_count = le16_to_cpu(init_fw_cb->pri.conn_ka_timeout);
        ha->discovery_wait = ql4xdiscoverywait;

        /* Send Initialize Firmware Control Block. */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
        mbox_cmd[1] = 0;
        mbox_cmd[2] = LSDW(init_fw_cb_dma);
        mbox_cmd[3] = MSDW(init_fw_cb_dma);
        mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) ==
            QLA_SUCCESS)
                status = QLA_SUCCESS;
         else {
                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_INITIALIZE_FIRMWARE "
                              "failed w/ status %04X\n", ha->host_no, __func__,
                              mbox_sts[0]));
        }
        dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
                          init_fw_cb, init_fw_cb_dma);

        return status;
}

/**
 * qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP
 * @ha: Pointer to host adapter structure.
 **/
int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
{
        struct init_fw_ctrl_blk *init_fw_cb;
        dma_addr_t init_fw_cb_dma;
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
                                        sizeof(struct init_fw_ctrl_blk),
                                        &init_fw_cb_dma, GFP_KERNEL);
        if (init_fw_cb == NULL) {
                printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
                       __func__);
                return 10;
        }

        /* Get Initialize Firmware Control Block. */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
        mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
        mbox_cmd[2] = LSDW(init_fw_cb_dma);
        mbox_cmd[3] = MSDW(init_fw_cb_dma);
        mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
                              ha->host_no, __func__));
                dma_free_coherent(&ha->pdev->dev,
                                  sizeof(struct init_fw_ctrl_blk),
                                  init_fw_cb, init_fw_cb_dma);
                return QLA_ERROR;
        }

        /* Save IP Address. */
        memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr,
               min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr)));
        memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet,
               min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet)));
        memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr,
               min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr)));

        dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
                          init_fw_cb, init_fw_cb_dma);

        return QLA_SUCCESS;
}

/**
 * qla4xxx_get_firmware_state - gets firmware state of HBA
 * @ha: Pointer to host adapter structure.
 **/
int qla4xxx_get_firmware_state(struct scsi_qla_host * ha)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        /* Get firmware version */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_GET_FW_STATE;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 4, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
                              "status %04X\n", ha->host_no, __func__,
                              mbox_sts[0]));
                return QLA_ERROR;
        }
        ha->firmware_state = mbox_sts[1];
        ha->board_id = mbox_sts[2];
        ha->addl_fw_state = mbox_sts[3];
        DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
                      ha->host_no, __func__, ha->firmware_state);)

                return QLA_SUCCESS;
}

/**
 * qla4xxx_get_firmware_status - retrieves firmware status
 * @ha: Pointer to host adapter structure.
 **/
int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        /* Get firmware version */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
                              "status %04X\n", ha->host_no, __func__,
                              mbox_sts[0]));
                return QLA_ERROR;
        }

        /* High-water mark of IOCBs */
        ha->iocb_hiwat = mbox_sts[2];
        if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
                ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
        else
                dev_info(&ha->pdev->dev, "WARNING!!!  You have less than %d "
                           "firmare IOCBs available (%d).\n",
                           IOCB_HIWAT_CUSHION, ha->iocb_hiwat);

        return QLA_SUCCESS;
}

/**
 * qla4xxx_get_fwddb_entry - retrieves firmware ddb entry
 * @ha: Pointer to host adapter structure.
 * @fw_ddb_index: Firmware's device database index
 * @fw_ddb_entry: Pointer to firmware's device database entry structure
 * @num_valid_ddb_entries: Pointer to number of valid ddb entries
 * @next_ddb_index: Pointer to next valid device database index
 * @fw_ddb_device_state: Pointer to device state
 **/
int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
                            uint16_t fw_ddb_index,
                            struct dev_db_entry *fw_ddb_entry,
                            dma_addr_t fw_ddb_entry_dma,
                            uint32_t *num_valid_ddb_entries,
                            uint32_t *next_ddb_index,
                            uint32_t *fw_ddb_device_state,
                            uint32_t *conn_err_detail,
                            uint16_t *tcp_source_port_num,
                            uint16_t *connection_id)
{
        int status = QLA_ERROR;
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        /* Make sure the device index is valid */
        if (fw_ddb_index >= MAX_DDB_ENTRIES) {
                DEBUG2(printk("scsi%ld: %s: index [%d] out of range.\n",
                              ha->host_no, __func__, fw_ddb_index));
                goto exit_get_fwddb;
        }
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY;
        mbox_cmd[1] = (uint32_t) fw_ddb_index;
        mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
        mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
        mbox_cmd[4] = sizeof(struct dev_db_entry);

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 7, &mbox_cmd[0], &mbox_sts[0]) ==
            QLA_ERROR) {
                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
                              " with status 0x%04X\n", ha->host_no, __func__,
                              mbox_sts[0]));
                goto exit_get_fwddb;
        }
        if (fw_ddb_index != mbox_sts[1]) {
                DEBUG2(printk("scsi%ld: %s: index mismatch [%d] != [%d].\n",
                              ha->host_no, __func__, fw_ddb_index,
                              mbox_sts[1]));
                goto exit_get_fwddb;
        }
        if (fw_ddb_entry) {
                dev_info(&ha->pdev->dev, "DDB[%d] MB0 %04x Tot %d Next %d "
                           "State %04x ConnErr %08x %d.%d.%d.%d:%04d \"%s\"\n",
                           fw_ddb_index, mbox_sts[0], mbox_sts[2], mbox_sts[3],
                           mbox_sts[4], mbox_sts[5], fw_ddb_entry->ip_addr[0],
                           fw_ddb_entry->ip_addr[1], fw_ddb_entry->ip_addr[2],
                           fw_ddb_entry->ip_addr[3],
                           le16_to_cpu(fw_ddb_entry->port),
                           fw_ddb_entry->iscsi_name);
        }
        if (num_valid_ddb_entries)
                *num_valid_ddb_entries = mbox_sts[2];
        if (next_ddb_index)
                *next_ddb_index = mbox_sts[3];
        if (fw_ddb_device_state)
                *fw_ddb_device_state = mbox_sts[4];

        /*
         * RA: This mailbox has been changed to pass connection error and
         * details.  Its true for ISP4010 as per Version E - Not sure when it
         * was changed.  Get the time2wait from the fw_dd_entry field :
         * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY
         * struct.
         */
        if (conn_err_detail)
                *conn_err_detail = mbox_sts[5];
        if (tcp_source_port_num)
                *tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
        if (connection_id)
                *connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
        status = QLA_SUCCESS;

exit_get_fwddb:
        return status;
}

/**
 * qla4xxx_set_fwddb_entry - sets a ddb entry.
 * @ha: Pointer to host adapter structure.
 * @fw_ddb_index: Firmware's device database index
 * @fw_ddb_entry: Pointer to firmware's ddb entry structure, or NULL.
 *
 * This routine initializes or updates the adapter's device database
 * entry for the specified device. It also triggers a login for the
 * specified device. Therefore, it may also be used as a secondary
 * login routine when a NULL pointer is specified for the fw_ddb_entry.
 **/
int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index,
                          dma_addr_t fw_ddb_entry_dma)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        /* Do not wait for completion. The firmware will send us an
         * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status.
         */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY;
        mbox_cmd[1] = (uint32_t) fw_ddb_index;
        mbox_cmd[2] = LSDW(fw_ddb_entry_dma);
        mbox_cmd[3] = MSDW(fw_ddb_entry_dma);
        mbox_cmd[4] = sizeof(struct dev_db_entry);

        return qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]);
}

/**
 * qla4xxx_get_crash_record - retrieves crash record.
 * @ha: Pointer to host adapter structure.
 *
 * This routine retrieves a crash record from the QLA4010 after an 8002h aen.
 **/
void qla4xxx_get_crash_record(struct scsi_qla_host * ha)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];
        struct crash_record *crash_record = NULL;
        dma_addr_t crash_record_dma = 0;
        uint32_t crash_record_size = 0;

        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_cmd));

        /* Get size of crash record. */
        mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
                              ha->host_no, __func__));
                goto exit_get_crash_record;
        }
        crash_record_size = mbox_sts[4];
        if (crash_record_size == 0) {
                DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
                              ha->host_no, __func__));
                goto exit_get_crash_record;
        }

        /* Alloc Memory for Crash Record. */
        crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size,
                                          &crash_record_dma, GFP_KERNEL);
        if (crash_record == NULL)
                goto exit_get_crash_record;

        /* Get Crash Record. */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_cmd));

        mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD;
        mbox_cmd[2] = LSDW(crash_record_dma);
        mbox_cmd[3] = MSDW(crash_record_dma);
        mbox_cmd[4] = crash_record_size;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS)
                goto exit_get_crash_record;

        /* Dump Crash Record. */

exit_get_crash_record:
        if (crash_record)
                dma_free_coherent(&ha->pdev->dev, crash_record_size,
                                  crash_record, crash_record_dma);
}

/**
 * qla4xxx_get_conn_event_log - retrieves connection event log
 * @ha: Pointer to host adapter structure.
 **/
void qla4xxx_get_conn_event_log(struct scsi_qla_host * ha)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];
        struct conn_event_log_entry *event_log = NULL;
        dma_addr_t event_log_dma = 0;
        uint32_t event_log_size = 0;
        uint32_t num_valid_entries;
        uint32_t      oldest_entry = 0;
        uint32_t        max_event_log_entries;
        uint8_t         i;


        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_cmd));

        /* Get size of crash record. */
        mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS)
                goto exit_get_event_log;

        event_log_size = mbox_sts[4];
        if (event_log_size == 0)
                goto exit_get_event_log;

        /* Alloc Memory for Crash Record. */
        event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size,
                                       &event_log_dma, GFP_KERNEL);
        if (event_log == NULL)
                goto exit_get_event_log;

        /* Get Crash Record. */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_cmd));

        mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG;
        mbox_cmd[2] = LSDW(event_log_dma);
        mbox_cmd[3] = MSDW(event_log_dma);

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
                              "log!\n", ha->host_no, __func__));
                goto exit_get_event_log;
        }

        /* Dump Event Log. */
        num_valid_entries = mbox_sts[1];

        max_event_log_entries = event_log_size /
                sizeof(struct conn_event_log_entry);

        if (num_valid_entries > max_event_log_entries)
                oldest_entry = num_valid_entries % max_event_log_entries;

        DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
                      ha->host_no, num_valid_entries));

        if (ql4xextended_error_logging == 3) {
                if (oldest_entry == 0) {
                        /* Circular Buffer has not wrapped around */
                        for (i=0; i < num_valid_entries; i++) {
                                qla4xxx_dump_buffer((uint8_t *)event_log+
                                                    (i*sizeof(*event_log)),
                                                    sizeof(*event_log));
                        }
                }
                else {
                        /* Circular Buffer has wrapped around -
                         * display accordingly*/
                        for (i=oldest_entry; i < max_event_log_entries; i++) {
                                qla4xxx_dump_buffer((uint8_t *)event_log+
                                                    (i*sizeof(*event_log)),
                                                    sizeof(*event_log));
                        }
                        for (i=0; i < oldest_entry; i++) {
                                qla4xxx_dump_buffer((uint8_t *)event_log+
                                                    (i*sizeof(*event_log)),
                                                    sizeof(*event_log));
                        }
                }
        }

exit_get_event_log:
        if (event_log)
                dma_free_coherent(&ha->pdev->dev, event_log_size, event_log,
                                  event_log_dma);
}

/**
 * qla4xxx_reset_lun - issues LUN Reset
 * @ha: Pointer to host adapter structure.
 * @db_entry: Pointer to device database entry
 * @un_entry: Pointer to lun entry structure
 *
 * This routine performs a LUN RESET on the specified target/lun.
 * The caller must ensure that the ddb_entry and lun_entry pointers
 * are valid before calling this routine.
 **/
int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
                      int lun)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];
        int status = QLA_SUCCESS;

        DEBUG2(printk("scsi%ld:%d:%d: lun reset issued\n", ha->host_no,
                      ddb_entry->os_target_id, lun));

        /*
         * Send lun reset command to ISP, so that the ISP will return all
         * outstanding requests with RESET status
         */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_LUN_RESET;
        mbox_cmd[1] = ddb_entry->fw_ddb_index;
        mbox_cmd[2] = lun << 8;
        mbox_cmd[5] = 0x01;     /* Immediate Command Enable */

        qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]);
        if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
            mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
                status = QLA_ERROR;

        return status;
}


int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
                      uint32_t offset, uint32_t len)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_READ_FLASH;
        mbox_cmd[1] = LSDW(dma_addr);
        mbox_cmd[2] = MSDW(dma_addr);
        mbox_cmd[3] = offset;
        mbox_cmd[4] = len;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
                    "status %04X %04X, offset %08x, len %08x\n", ha->host_no,
                    __func__, mbox_sts[0], mbox_sts[1], offset, len));
                return QLA_ERROR;
        }
        return QLA_SUCCESS;
}

/**
 * qla4xxx_get_fw_version - gets firmware version
 * @ha: Pointer to host adapter structure.
 *
 * Retrieves the firmware version on HBA. In QLA4010, mailboxes 2 & 3 may
 * hold an address for data.  Make sure that we write 0 to those mailboxes,
 * if unused.
 **/
int qla4xxx_get_fw_version(struct scsi_qla_host * ha)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        /* Get firmware version. */
        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_ABOUT_FW;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: MBOX_CMD_ABOUT_FW failed w/ "
                    "status %04X\n", ha->host_no, __func__, mbox_sts[0]));
                return QLA_ERROR;
        }

        /* Save firmware version information. */
        ha->firmware_version[0] = mbox_sts[1];
        ha->firmware_version[1] = mbox_sts[2];
        ha->patch_number = mbox_sts[3];
        ha->build_number = mbox_sts[4];

        return QLA_SUCCESS;
}

static int qla4xxx_get_default_ddb(struct scsi_qla_host *ha,
                                   dma_addr_t dma_addr)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS;
        mbox_cmd[2] = LSDW(dma_addr);
        mbox_cmd[3] = MSDW(dma_addr);

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
                     ha->host_no, __func__, mbox_sts[0]));
                return QLA_ERROR;
        }
        return QLA_SUCCESS;
}

static int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t *ddb_index)
{
        uint32_t mbox_cmd[MBOX_REG_COUNT];
        uint32_t mbox_sts[MBOX_REG_COUNT];

        memset(&mbox_cmd, 0, sizeof(mbox_cmd));
        memset(&mbox_sts, 0, sizeof(mbox_sts));

        mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY;
        mbox_cmd[1] = MAX_PRST_DEV_DB_ENTRIES;

        if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) !=
            QLA_SUCCESS) {
                if (mbox_sts[0] == MBOX_STS_COMMAND_ERROR) {
                        *ddb_index = mbox_sts[2];
                } else {
                        DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
                             ha->host_no, __func__, mbox_sts[0]));
                        return QLA_ERROR;
                }
        } else {
                *ddb_index = MAX_PRST_DEV_DB_ENTRIES;
        }

        return QLA_SUCCESS;
}


int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port)
{
        struct dev_db_entry *fw_ddb_entry;
        dma_addr_t fw_ddb_entry_dma;
        uint32_t ddb_index;
        int ret_val = QLA_SUCCESS;


        fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev,
                                          sizeof(*fw_ddb_entry),
                                          &fw_ddb_entry_dma, GFP_KERNEL);
        if (!fw_ddb_entry) {
                DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
                              ha->host_no, __func__));
                ret_val = QLA_ERROR;
                goto qla4xxx_send_tgts_exit;
        }

        ret_val = qla4xxx_get_default_ddb(ha, fw_ddb_entry_dma);
        if (ret_val != QLA_SUCCESS)
                goto qla4xxx_send_tgts_exit;

        ret_val = qla4xxx_req_ddb_entry(ha, &ddb_index);
        if (ret_val != QLA_SUCCESS)
                goto qla4xxx_send_tgts_exit;

        memset(fw_ddb_entry->iscsi_alias, 0,
               sizeof(fw_ddb_entry->iscsi_alias));

        memset(fw_ddb_entry->iscsi_name, 0,
               sizeof(fw_ddb_entry->iscsi_name));

        memset(fw_ddb_entry->ip_addr, 0, sizeof(fw_ddb_entry->ip_addr));
        memset(fw_ddb_entry->tgt_addr, 0,
               sizeof(fw_ddb_entry->tgt_addr));

        fw_ddb_entry->options = (DDB_OPT_DISC_SESSION | DDB_OPT_TARGET);
        fw_ddb_entry->port = cpu_to_le16(ntohs(port));

        fw_ddb_entry->ip_addr[0] = *ip;
        fw_ddb_entry->ip_addr[1] = *(ip + 1);
        fw_ddb_entry->ip_addr[2] = *(ip + 2);
        fw_ddb_entry->ip_addr[3] = *(ip + 3);

        ret_val = qla4xxx_set_ddb_entry(ha, ddb_index, fw_ddb_entry_dma);

qla4xxx_send_tgts_exit:
        dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
                          fw_ddb_entry, fw_ddb_entry_dma);
        return ret_val;
}