?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
cris: add arch/cris/include/asm/serial.h
[linux-2.6/next.git] / drivers / net / atlx / atl2.c
blobd4f7dda397217e30063b91246902c942702ece8a
1 /*
2 * Copyright(c) 2006 - 2007 Atheros Corporation. All rights reserved.
3 * Copyright(c) 2007 - 2008 Chris Snook <csnook@redhat.com>
4 *
5 * Derived from Intel e1000 driver
6 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the Free
10 * Software Foundation; either version 2 of the License, or (at your option)
11 * any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along with
19 * this program; if not, write to the Free Software Foundation, Inc., 59
20 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 */
22
23 #include <linux/atomic.h>
24 #include <linux/crc32.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ethtool.h>
28 #include <linux/hardirq.h>
29 #include <linux/if_vlan.h>
30 #include <linux/in.h>
31 #include <linux/interrupt.h>
32 #include <linux/ip.h>
33 #include <linux/irqflags.h>
34 #include <linux/irqreturn.h>
35 #include <linux/mii.h>
36 #include <linux/net.h>
37 #include <linux/netdevice.h>
38 #include <linux/pci.h>
39 #include <linux/pci_ids.h>
40 #include <linux/pm.h>
41 #include <linux/skbuff.h>
42 #include <linux/slab.h>
43 #include <linux/spinlock.h>
44 #include <linux/string.h>
45 #include <linux/tcp.h>
46 #include <linux/timer.h>
47 #include <linux/types.h>
48 #include <linux/workqueue.h>
49
50 #include "atl2.h"
51
52 #define ATL2_DRV_VERSION "2.2.3"
53
54 static const char atl2_driver_name[] = "atl2";
55 static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
56 static const char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation.";
57 static const char atl2_driver_version[] = ATL2_DRV_VERSION;
58
59 MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>");
60 MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver");
61 MODULE_LICENSE("GPL");
62 MODULE_VERSION(ATL2_DRV_VERSION);
63
64 /*
65 * atl2_pci_tbl - PCI Device ID Table
66 */
67 static DEFINE_PCI_DEVICE_TABLE(atl2_pci_tbl) = {
68 {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)},
69 /* required last entry */
70 {0,}
71 };
72 MODULE_DEVICE_TABLE(pci, atl2_pci_tbl);
73
74 static void atl2_set_ethtool_ops(struct net_device *netdev);
75
76 static void atl2_check_options(struct atl2_adapter *adapter);
77
78 /*
79 * atl2_sw_init - Initialize general software structures (struct atl2_adapter)
80 * @adapter: board private structure to initialize
81 *
82 * atl2_sw_init initializes the Adapter private data structure.
83 * Fields are initialized based on PCI device information and
84 * OS network device settings (MTU size).
85 */
86 static int __devinit atl2_sw_init(struct atl2_adapter *adapter)
87 {
88 struct atl2_hw *hw = &adapter->hw;
89 struct pci_dev *pdev = adapter->pdev;
90
91 /* PCI config space info */
92 hw->vendor_id = pdev->vendor;
93 hw->device_id = pdev->device;
94 hw->subsystem_vendor_id = pdev->subsystem_vendor;
95 hw->subsystem_id = pdev->subsystem_device;
96 hw->revision_id = pdev->revision;
97
98 pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
99
100 adapter->wol = 0;
101 adapter->ict = 50000; /* ~100ms */
102 adapter->link_speed = SPEED_0; /* hardware init */
103 adapter->link_duplex = FULL_DUPLEX;
104
105 hw->phy_configured = false;
106 hw->preamble_len = 7;
107 hw->ipgt = 0x60;
108 hw->min_ifg = 0x50;
109 hw->ipgr1 = 0x40;
110 hw->ipgr2 = 0x60;
111 hw->retry_buf = 2;
112 hw->max_retry = 0xf;
113 hw->lcol = 0x37;
114 hw->jam_ipg = 7;
115 hw->fc_rxd_hi = 0;
116 hw->fc_rxd_lo = 0;
117 hw->max_frame_size = adapter->netdev->mtu;
118
119 spin_lock_init(&adapter->stats_lock);
120
121 set_bit(__ATL2_DOWN, &adapter->flags);
122
123 return 0;
124 }
125
126 /*
127 * atl2_set_multi - Multicast and Promiscuous mode set
128 * @netdev: network interface device structure
129 *
130 * The set_multi entry point is called whenever the multicast address
131 * list or the network interface flags are updated. This routine is
132 * responsible for configuring the hardware for proper multicast,
133 * promiscuous mode, and all-multi behavior.
134 */
135 static void atl2_set_multi(struct net_device *netdev)
136 {
137 struct atl2_adapter *adapter = netdev_priv(netdev);
138 struct atl2_hw *hw = &adapter->hw;
139 struct netdev_hw_addr *ha;
140 u32 rctl;
141 u32 hash_value;
142
143 /* Check for Promiscuous and All Multicast modes */
144 rctl = ATL2_READ_REG(hw, REG_MAC_CTRL);
145
146 if (netdev->flags & IFF_PROMISC) {
147 rctl |= MAC_CTRL_PROMIS_EN;
148 } else if (netdev->flags & IFF_ALLMULTI) {
149 rctl |= MAC_CTRL_MC_ALL_EN;
150 rctl &= ~MAC_CTRL_PROMIS_EN;
151 } else
152 rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
153
154 ATL2_WRITE_REG(hw, REG_MAC_CTRL, rctl);
155
156 /* clear the old settings from the multicast hash table */
157 ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
158 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
159
160 /* comoute mc addresses' hash value ,and put it into hash table */
161 netdev_for_each_mc_addr(ha, netdev) {
162 hash_value = atl2_hash_mc_addr(hw, ha->addr);
163 atl2_hash_set(hw, hash_value);
164 }
165 }
166
167 static void init_ring_ptrs(struct atl2_adapter *adapter)
168 {
169 /* Read / Write Ptr Initialize: */
170 adapter->txd_write_ptr = 0;
171 atomic_set(&adapter->txd_read_ptr, 0);
172
173 adapter->rxd_read_ptr = 0;
174 adapter->rxd_write_ptr = 0;
175
176 atomic_set(&adapter->txs_write_ptr, 0);
177 adapter->txs_next_clear = 0;
178 }
179
180 /*
181 * atl2_configure - Configure Transmit&Receive Unit after Reset
182 * @adapter: board private structure
183 *
184 * Configure the Tx /Rx unit of the MAC after a reset.
185 */
186 static int atl2_configure(struct atl2_adapter *adapter)
187 {
188 struct atl2_hw *hw = &adapter->hw;
189 u32 value;
190
191 /* clear interrupt status */
192 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0xffffffff);
193
194 /* set MAC Address */
195 value = (((u32)hw->mac_addr[2]) << 24) |
196 (((u32)hw->mac_addr[3]) << 16) |
197 (((u32)hw->mac_addr[4]) << 8) |
198 (((u32)hw->mac_addr[5]));
199 ATL2_WRITE_REG(hw, REG_MAC_STA_ADDR, value);
200 value = (((u32)hw->mac_addr[0]) << 8) |
201 (((u32)hw->mac_addr[1]));
202 ATL2_WRITE_REG(hw, (REG_MAC_STA_ADDR+4), value);
203
204 /* HI base address */
205 ATL2_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
206 (u32)((adapter->ring_dma & 0xffffffff00000000ULL) >> 32));
207
208 /* LO base address */
209 ATL2_WRITE_REG(hw, REG_TXD_BASE_ADDR_LO,
210 (u32)(adapter->txd_dma & 0x00000000ffffffffULL));
211 ATL2_WRITE_REG(hw, REG_TXS_BASE_ADDR_LO,
212 (u32)(adapter->txs_dma & 0x00000000ffffffffULL));
213 ATL2_WRITE_REG(hw, REG_RXD_BASE_ADDR_LO,
214 (u32)(adapter->rxd_dma & 0x00000000ffffffffULL));
215
216 /* element count */
217 ATL2_WRITE_REGW(hw, REG_TXD_MEM_SIZE, (u16)(adapter->txd_ring_size/4));
218 ATL2_WRITE_REGW(hw, REG_TXS_MEM_SIZE, (u16)adapter->txs_ring_size);
219 ATL2_WRITE_REGW(hw, REG_RXD_BUF_NUM, (u16)adapter->rxd_ring_size);
220
221 /* config Internal SRAM */
222 /*
223 ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_tx_end);
224 ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_rx_end);
225 */
226
227 /* config IPG/IFG */
228 value = (((u32)hw->ipgt & MAC_IPG_IFG_IPGT_MASK) <<
229 MAC_IPG_IFG_IPGT_SHIFT) |
230 (((u32)hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) <<
231 MAC_IPG_IFG_MIFG_SHIFT) |
232 (((u32)hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) <<
233 MAC_IPG_IFG_IPGR1_SHIFT)|
234 (((u32)hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) <<
235 MAC_IPG_IFG_IPGR2_SHIFT);
236 ATL2_WRITE_REG(hw, REG_MAC_IPG_IFG, value);
237
238 /* config Half-Duplex Control */
239 value = ((u32)hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
240 (((u32)hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) <<
241 MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
242 MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
243 (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
244 (((u32)hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) <<
245 MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
246 ATL2_WRITE_REG(hw, REG_MAC_HALF_DUPLX_CTRL, value);
247
248 /* set Interrupt Moderator Timer */
249 ATL2_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, adapter->imt);
250 ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_ITIMER_EN);
251
252 /* set Interrupt Clear Timer */
253 ATL2_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, adapter->ict);
254
255 /* set MTU */
256 ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu +
257 ENET_HEADER_SIZE + VLAN_SIZE + ETHERNET_FCS_SIZE);
258
259 /* 1590 */
260 ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177);
261
262 /* flow control */
263 ATL2_WRITE_REGW(hw, REG_PAUSE_ON_TH, hw->fc_rxd_hi);
264 ATL2_WRITE_REGW(hw, REG_PAUSE_OFF_TH, hw->fc_rxd_lo);
265
266 /* Init mailbox */
267 ATL2_WRITE_REGW(hw, REG_MB_TXD_WR_IDX, (u16)adapter->txd_write_ptr);
268 ATL2_WRITE_REGW(hw, REG_MB_RXD_RD_IDX, (u16)adapter->rxd_read_ptr);
269
270 /* enable DMA read/write */
271 ATL2_WRITE_REGB(hw, REG_DMAR, DMAR_EN);
272 ATL2_WRITE_REGB(hw, REG_DMAW, DMAW_EN);
273
274 value = ATL2_READ_REG(&adapter->hw, REG_ISR);
275 if ((value & ISR_PHY_LINKDOWN) != 0)
276 value = 1; /* config failed */
277 else
278 value = 0;
279
280 /* clear all interrupt status */
281 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0x3fffffff);
282 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
283 return value;
284 }
285
286 /*
287 * atl2_setup_ring_resources - allocate Tx / RX descriptor resources
288 * @adapter: board private structure
289 *
290 * Return 0 on success, negative on failure
291 */
292 static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter)
293 {
294 struct pci_dev *pdev = adapter->pdev;
295 int size;
296 u8 offset = 0;
297
298 /* real ring DMA buffer */
299 adapter->ring_size = size =
300 adapter->txd_ring_size * 1 + 7 + /* dword align */
301 adapter->txs_ring_size * 4 + 7 + /* dword align */
302 adapter->rxd_ring_size * 1536 + 127; /* 128bytes align */
303
304 adapter->ring_vir_addr = pci_alloc_consistent(pdev, size,
305 &adapter->ring_dma);
306 if (!adapter->ring_vir_addr)
307 return -ENOMEM;
308 memset(adapter->ring_vir_addr, 0, adapter->ring_size);
309
310 /* Init TXD Ring */
311 adapter->txd_dma = adapter->ring_dma ;
312 offset = (adapter->txd_dma & 0x7) ? (8 - (adapter->txd_dma & 0x7)) : 0;
313 adapter->txd_dma += offset;
314 adapter->txd_ring = adapter->ring_vir_addr + offset;
315
316 /* Init TXS Ring */
317 adapter->txs_dma = adapter->txd_dma + adapter->txd_ring_size;
318 offset = (adapter->txs_dma & 0x7) ? (8 - (adapter->txs_dma & 0x7)) : 0;
319 adapter->txs_dma += offset;
320 adapter->txs_ring = (struct tx_pkt_status *)
321 (((u8 *)adapter->txd_ring) + (adapter->txd_ring_size + offset));
322
323 /* Init RXD Ring */
324 adapter->rxd_dma = adapter->txs_dma + adapter->txs_ring_size * 4;
325 offset = (adapter->rxd_dma & 127) ?
326 (128 - (adapter->rxd_dma & 127)) : 0;
327 if (offset > 7)
328 offset -= 8;
329 else
330 offset += (128 - 8);
331
332 adapter->rxd_dma += offset;
333 adapter->rxd_ring = (struct rx_desc *) (((u8 *)adapter->txs_ring) +
334 (adapter->txs_ring_size * 4 + offset));
335
336 /*
337 * Read / Write Ptr Initialize:
338 * init_ring_ptrs(adapter);
339 */
340 return 0;
341 }
342
343 /*
344 * atl2_irq_enable - Enable default interrupt generation settings
345 * @adapter: board private structure
346 */
347 static inline void atl2_irq_enable(struct atl2_adapter *adapter)
348 {
349 ATL2_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
350 ATL2_WRITE_FLUSH(&adapter->hw);
351 }
352
353 /*
354 * atl2_irq_disable - Mask off interrupt generation on the NIC
355 * @adapter: board private structure
356 */
357 static inline void atl2_irq_disable(struct atl2_adapter *adapter)
358 {
359 ATL2_WRITE_REG(&adapter->hw, REG_IMR, 0);
360 ATL2_WRITE_FLUSH(&adapter->hw);
361 synchronize_irq(adapter->pdev->irq);
362 }
363
364 static void __atl2_vlan_mode(u32 features, u32 *ctrl)
365 {
366 if (features & NETIF_F_HW_VLAN_RX) {
367 /* enable VLAN tag insert/strip */
368 *ctrl |= MAC_CTRL_RMV_VLAN;
369 } else {
370 /* disable VLAN tag insert/strip */
371 *ctrl &= ~MAC_CTRL_RMV_VLAN;
372 }
373 }
374
375 static void atl2_vlan_mode(struct net_device *netdev, u32 features)
376 {
377 struct atl2_adapter *adapter = netdev_priv(netdev);
378 u32 ctrl;
379
380 atl2_irq_disable(adapter);
381
382 ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
383 __atl2_vlan_mode(features, &ctrl);
384 ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
385
386 atl2_irq_enable(adapter);
387 }
388
389 static void atl2_restore_vlan(struct atl2_adapter *adapter)
390 {
391 atl2_vlan_mode(adapter->netdev, adapter->netdev->features);
392 }
393
394 static u32 atl2_fix_features(struct net_device *netdev, u32 features)
395 {
396 /*
397 * Since there is no support for separate rx/tx vlan accel
398 * enable/disable make sure tx flag is always in same state as rx.
399 */
400 if (features & NETIF_F_HW_VLAN_RX)
401 features |= NETIF_F_HW_VLAN_TX;
402 else
403 features &= ~NETIF_F_HW_VLAN_TX;
404
405 return features;
406 }
407
408 static int atl2_set_features(struct net_device *netdev, u32 features)
409 {
410 u32 changed = netdev->features ^ features;
411
412 if (changed & NETIF_F_HW_VLAN_RX)
413 atl2_vlan_mode(netdev, features);
414
415 return 0;
416 }
417
418 static void atl2_intr_rx(struct atl2_adapter *adapter)
419 {
420 struct net_device *netdev = adapter->netdev;
421 struct rx_desc *rxd;
422 struct sk_buff *skb;
423
424 do {
425 rxd = adapter->rxd_ring+adapter->rxd_write_ptr;
426 if (!rxd->status.update)
427 break; /* end of tx */
428
429 /* clear this flag at once */
430 rxd->status.update = 0;
431
432 if (rxd->status.ok && rxd->status.pkt_size >= 60) {
433 int rx_size = (int)(rxd->status.pkt_size - 4);
434 /* alloc new buffer */
435 skb = netdev_alloc_skb_ip_align(netdev, rx_size);
436 if (NULL == skb) {
437 printk(KERN_WARNING
438 "%s: Mem squeeze, deferring packet.\n",
439 netdev->name);
440 /*
441 * Check that some rx space is free. If not,
442 * free one and mark stats->rx_dropped++.
443 */
444 netdev->stats.rx_dropped++;
445 break;
446 }
447 memcpy(skb->data, rxd->packet, rx_size);
448 skb_put(skb, rx_size);
449 skb->protocol = eth_type_trans(skb, netdev);
450 if (rxd->status.vlan) {
451 u16 vlan_tag = (rxd->status.vtag>>4) |
452 ((rxd->status.vtag&7) << 13) |
453 ((rxd->status.vtag&8) << 9);
454
455 __vlan_hwaccel_put_tag(skb, vlan_tag);
456 }
457 netif_rx(skb);
458 netdev->stats.rx_bytes += rx_size;
459 netdev->stats.rx_packets++;
460 } else {
461 netdev->stats.rx_errors++;
462
463 if (rxd->status.ok && rxd->status.pkt_size <= 60)
464 netdev->stats.rx_length_errors++;
465 if (rxd->status.mcast)
466 netdev->stats.multicast++;
467 if (rxd->status.crc)
468 netdev->stats.rx_crc_errors++;
469 if (rxd->status.align)
470 netdev->stats.rx_frame_errors++;
471 }
472
473 /* advance write ptr */
474 if (++adapter->rxd_write_ptr == adapter->rxd_ring_size)
475 adapter->rxd_write_ptr = 0;
476 } while (1);
477
478 /* update mailbox? */
479 adapter->rxd_read_ptr = adapter->rxd_write_ptr;
480 ATL2_WRITE_REGW(&adapter->hw, REG_MB_RXD_RD_IDX, adapter->rxd_read_ptr);
481 }
482
483 static void atl2_intr_tx(struct atl2_adapter *adapter)
484 {
485 struct net_device *netdev = adapter->netdev;
486 u32 txd_read_ptr;
487 u32 txs_write_ptr;
488 struct tx_pkt_status *txs;
489 struct tx_pkt_header *txph;
490 int free_hole = 0;
491
492 do {
493 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
494 txs = adapter->txs_ring + txs_write_ptr;
495 if (!txs->update)
496 break; /* tx stop here */
497
498 free_hole = 1;
499 txs->update = 0;
500
501 if (++txs_write_ptr == adapter->txs_ring_size)
502 txs_write_ptr = 0;
503 atomic_set(&adapter->txs_write_ptr, (int)txs_write_ptr);
504
505 txd_read_ptr = (u32) atomic_read(&adapter->txd_read_ptr);
506 txph = (struct tx_pkt_header *)
507 (((u8 *)adapter->txd_ring) + txd_read_ptr);
508
509 if (txph->pkt_size != txs->pkt_size) {
510 struct tx_pkt_status *old_txs = txs;
511 printk(KERN_WARNING
512 "%s: txs packet size not consistent with txd"
513 " txd_:0x%08x, txs_:0x%08x!\n",
514 adapter->netdev->name,
515 *(u32 *)txph, *(u32 *)txs);
516 printk(KERN_WARNING
517 "txd read ptr: 0x%x\n",
518 txd_read_ptr);
519 txs = adapter->txs_ring + txs_write_ptr;
520 printk(KERN_WARNING
521 "txs-behind:0x%08x\n",
522 *(u32 *)txs);
523 if (txs_write_ptr < 2) {
524 txs = adapter->txs_ring +
525 (adapter->txs_ring_size +
526 txs_write_ptr - 2);
527 } else {
528 txs = adapter->txs_ring + (txs_write_ptr - 2);
529 }
530 printk(KERN_WARNING
531 "txs-before:0x%08x\n",
532 *(u32 *)txs);
533 txs = old_txs;
534 }
535
536 /* 4for TPH */
537 txd_read_ptr += (((u32)(txph->pkt_size) + 7) & ~3);
538 if (txd_read_ptr >= adapter->txd_ring_size)
539 txd_read_ptr -= adapter->txd_ring_size;
540
541 atomic_set(&adapter->txd_read_ptr, (int)txd_read_ptr);
542
543 /* tx statistics: */
544 if (txs->ok) {
545 netdev->stats.tx_bytes += txs->pkt_size;
546 netdev->stats.tx_packets++;
547 }
548 else
549 netdev->stats.tx_errors++;
550
551 if (txs->defer)
552 netdev->stats.collisions++;
553 if (txs->abort_col)
554 netdev->stats.tx_aborted_errors++;
555 if (txs->late_col)
556 netdev->stats.tx_window_errors++;
557 if (txs->underun)
558 netdev->stats.tx_fifo_errors++;
559 } while (1);
560
561 if (free_hole) {
562 if (netif_queue_stopped(adapter->netdev) &&
563 netif_carrier_ok(adapter->netdev))
564 netif_wake_queue(adapter->netdev);
565 }
566 }
567
568 static void atl2_check_for_link(struct atl2_adapter *adapter)
569 {
570 struct net_device *netdev = adapter->netdev;
571 u16 phy_data = 0;
572
573 spin_lock(&adapter->stats_lock);
574 atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
575 atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
576 spin_unlock(&adapter->stats_lock);
577
578 /* notify upper layer link down ASAP */
579 if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
580 if (netif_carrier_ok(netdev)) { /* old link state: Up */
581 printk(KERN_INFO "%s: %s NIC Link is Down\n",
582 atl2_driver_name, netdev->name);
583 adapter->link_speed = SPEED_0;
584 netif_carrier_off(netdev);
585 netif_stop_queue(netdev);
586 }
587 }
588 schedule_work(&adapter->link_chg_task);
589 }
590
591 static inline void atl2_clear_phy_int(struct atl2_adapter *adapter)
592 {
593 u16 phy_data;
594 spin_lock(&adapter->stats_lock);
595 atl2_read_phy_reg(&adapter->hw, 19, &phy_data);
596 spin_unlock(&adapter->stats_lock);
597 }
598
599 /*
600 * atl2_intr - Interrupt Handler
601 * @irq: interrupt number
602 * @data: pointer to a network interface device structure
603 * @pt_regs: CPU registers structure
604 */
605 static irqreturn_t atl2_intr(int irq, void *data)
606 {
607 struct atl2_adapter *adapter = netdev_priv(data);
608 struct atl2_hw *hw = &adapter->hw;
609 u32 status;
610
611 status = ATL2_READ_REG(hw, REG_ISR);
612 if (0 == status)
613 return IRQ_NONE;
614
615 /* link event */
616 if (status & ISR_PHY)
617 atl2_clear_phy_int(adapter);
618
619 /* clear ISR status, and Enable CMB DMA/Disable Interrupt */
620 ATL2_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
621
622 /* check if PCIE PHY Link down */
623 if (status & ISR_PHY_LINKDOWN) {
624 if (netif_running(adapter->netdev)) { /* reset MAC */
625 ATL2_WRITE_REG(hw, REG_ISR, 0);
626 ATL2_WRITE_REG(hw, REG_IMR, 0);
627 ATL2_WRITE_FLUSH(hw);
628 schedule_work(&adapter->reset_task);
629 return IRQ_HANDLED;
630 }
631 }
632
633 /* check if DMA read/write error? */
634 if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
635 ATL2_WRITE_REG(hw, REG_ISR, 0);
636 ATL2_WRITE_REG(hw, REG_IMR, 0);
637 ATL2_WRITE_FLUSH(hw);
638 schedule_work(&adapter->reset_task);
639 return IRQ_HANDLED;
640 }
641
642 /* link event */
643 if (status & (ISR_PHY | ISR_MANUAL)) {
644 adapter->netdev->stats.tx_carrier_errors++;
645 atl2_check_for_link(adapter);
646 }
647
648 /* transmit event */
649 if (status & ISR_TX_EVENT)
650 atl2_intr_tx(adapter);
651
652 /* rx exception */
653 if (status & ISR_RX_EVENT)
654 atl2_intr_rx(adapter);
655
656 /* re-enable Interrupt */
657 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
658 return IRQ_HANDLED;
659 }
660
661 static int atl2_request_irq(struct atl2_adapter *adapter)
662 {
663 struct net_device *netdev = adapter->netdev;
664 int flags, err = 0;
665
666 flags = IRQF_SHARED;
667 adapter->have_msi = true;
668 err = pci_enable_msi(adapter->pdev);
669 if (err)
670 adapter->have_msi = false;
671
672 if (adapter->have_msi)
673 flags &= ~IRQF_SHARED;
674
675 return request_irq(adapter->pdev->irq, atl2_intr, flags, netdev->name,
676 netdev);
677 }
678
679 /*
680 * atl2_free_ring_resources - Free Tx / RX descriptor Resources
681 * @adapter: board private structure
682 *
683 * Free all transmit software resources
684 */
685 static void atl2_free_ring_resources(struct atl2_adapter *adapter)
686 {
687 struct pci_dev *pdev = adapter->pdev;
688 pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr,
689 adapter->ring_dma);
690 }
691
692 /*
693 * atl2_open - Called when a network interface is made active
694 * @netdev: network interface device structure
695 *
696 * Returns 0 on success, negative value on failure
697 *
698 * The open entry point is called when a network interface is made
699 * active by the system (IFF_UP). At this point all resources needed
700 * for transmit and receive operations are allocated, the interrupt
701 * handler is registered with the OS, the watchdog timer is started,
702 * and the stack is notified that the interface is ready.
703 */
704 static int atl2_open(struct net_device *netdev)
705 {
706 struct atl2_adapter *adapter = netdev_priv(netdev);
707 int err;
708 u32 val;
709
710 /* disallow open during test */
711 if (test_bit(__ATL2_TESTING, &adapter->flags))
712 return -EBUSY;
713
714 /* allocate transmit descriptors */
715 err = atl2_setup_ring_resources(adapter);
716 if (err)
717 return err;
718
719 err = atl2_init_hw(&adapter->hw);
720 if (err) {
721 err = -EIO;
722 goto err_init_hw;
723 }
724
725 /* hardware has been reset, we need to reload some things */
726 atl2_set_multi(netdev);
727 init_ring_ptrs(adapter);
728
729 atl2_restore_vlan(adapter);
730
731 if (atl2_configure(adapter)) {
732 err = -EIO;
733 goto err_config;
734 }
735
736 err = atl2_request_irq(adapter);
737 if (err)
738 goto err_req_irq;
739
740 clear_bit(__ATL2_DOWN, &adapter->flags);
741
742 mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 4*HZ));
743
744 val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
745 ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
746 val | MASTER_CTRL_MANUAL_INT);
747
748 atl2_irq_enable(adapter);
749
750 return 0;
751
752 err_init_hw:
753 err_req_irq:
754 err_config:
755 atl2_free_ring_resources(adapter);
756 atl2_reset_hw(&adapter->hw);
757
758 return err;
759 }
760
761 static void atl2_down(struct atl2_adapter *adapter)
762 {
763 struct net_device *netdev = adapter->netdev;
764
765 /* signal that we're down so the interrupt handler does not
766 * reschedule our watchdog timer */
767 set_bit(__ATL2_DOWN, &adapter->flags);
768
769 netif_tx_disable(netdev);
770
771 /* reset MAC to disable all RX/TX */
772 atl2_reset_hw(&adapter->hw);
773 msleep(1);
774
775 atl2_irq_disable(adapter);
776
777 del_timer_sync(&adapter->watchdog_timer);
778 del_timer_sync(&adapter->phy_config_timer);
779 clear_bit(0, &adapter->cfg_phy);
780
781 netif_carrier_off(netdev);
782 adapter->link_speed = SPEED_0;
783 adapter->link_duplex = -1;
784 }
785
786 static void atl2_free_irq(struct atl2_adapter *adapter)
787 {
788 struct net_device *netdev = adapter->netdev;
789
790 free_irq(adapter->pdev->irq, netdev);
791
792 #ifdef CONFIG_PCI_MSI
793 if (adapter->have_msi)
794 pci_disable_msi(adapter->pdev);
795 #endif
796 }
797
798 /*
799 * atl2_close - Disables a network interface
800 * @netdev: network interface device structure
801 *
802 * Returns 0, this is not allowed to fail
803 *
804 * The close entry point is called when an interface is de-activated
805 * by the OS. The hardware is still under the drivers control, but
806 * needs to be disabled. A global MAC reset is issued to stop the
807 * hardware, and all transmit and receive resources are freed.
808 */
809 static int atl2_close(struct net_device *netdev)
810 {
811 struct atl2_adapter *adapter = netdev_priv(netdev);
812
813 WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
814
815 atl2_down(adapter);
816 atl2_free_irq(adapter);
817 atl2_free_ring_resources(adapter);
818
819 return 0;
820 }
821
822 static inline int TxsFreeUnit(struct atl2_adapter *adapter)
823 {
824 u32 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
825
826 return (adapter->txs_next_clear >= txs_write_ptr) ?
827 (int) (adapter->txs_ring_size - adapter->txs_next_clear +
828 txs_write_ptr - 1) :
829 (int) (txs_write_ptr - adapter->txs_next_clear - 1);
830 }
831
832 static inline int TxdFreeBytes(struct atl2_adapter *adapter)
833 {
834 u32 txd_read_ptr = (u32)atomic_read(&adapter->txd_read_ptr);
835
836 return (adapter->txd_write_ptr >= txd_read_ptr) ?
837 (int) (adapter->txd_ring_size - adapter->txd_write_ptr +
838 txd_read_ptr - 1) :
839 (int) (txd_read_ptr - adapter->txd_write_ptr - 1);
840 }
841
842 static netdev_tx_t atl2_xmit_frame(struct sk_buff *skb,
843 struct net_device *netdev)
844 {
845 struct atl2_adapter *adapter = netdev_priv(netdev);
846 struct tx_pkt_header *txph;
847 u32 offset, copy_len;
848 int txs_unused;
849 int txbuf_unused;
850
851 if (test_bit(__ATL2_DOWN, &adapter->flags)) {
852 dev_kfree_skb_any(skb);
853 return NETDEV_TX_OK;
854 }
855
856 if (unlikely(skb->len <= 0)) {
857 dev_kfree_skb_any(skb);
858 return NETDEV_TX_OK;
859 }
860
861 txs_unused = TxsFreeUnit(adapter);
862 txbuf_unused = TxdFreeBytes(adapter);
863
864 if (skb->len + sizeof(struct tx_pkt_header) + 4 > txbuf_unused ||
865 txs_unused < 1) {
866 /* not enough resources */
867 netif_stop_queue(netdev);
868 return NETDEV_TX_BUSY;
869 }
870
871 offset = adapter->txd_write_ptr;
872
873 txph = (struct tx_pkt_header *) (((u8 *)adapter->txd_ring) + offset);
874
875 *(u32 *)txph = 0;
876 txph->pkt_size = skb->len;
877
878 offset += 4;
879 if (offset >= adapter->txd_ring_size)
880 offset -= adapter->txd_ring_size;
881 copy_len = adapter->txd_ring_size - offset;
882 if (copy_len >= skb->len) {
883 memcpy(((u8 *)adapter->txd_ring) + offset, skb->data, skb->len);
884 offset += ((u32)(skb->len + 3) & ~3);
885 } else {
886 memcpy(((u8 *)adapter->txd_ring)+offset, skb->data, copy_len);
887 memcpy((u8 *)adapter->txd_ring, skb->data+copy_len,
888 skb->len-copy_len);
889 offset = ((u32)(skb->len-copy_len + 3) & ~3);
890 }
891 #ifdef NETIF_F_HW_VLAN_TX
892 if (vlan_tx_tag_present(skb)) {
893 u16 vlan_tag = vlan_tx_tag_get(skb);
894 vlan_tag = (vlan_tag << 4) |
895 (vlan_tag >> 13) |
896 ((vlan_tag >> 9) & 0x8);
897 txph->ins_vlan = 1;
898 txph->vlan = vlan_tag;
899 }
900 #endif
901 if (offset >= adapter->txd_ring_size)
902 offset -= adapter->txd_ring_size;
903 adapter->txd_write_ptr = offset;
904
905 /* clear txs before send */
906 adapter->txs_ring[adapter->txs_next_clear].update = 0;
907 if (++adapter->txs_next_clear == adapter->txs_ring_size)
908 adapter->txs_next_clear = 0;
909
910 ATL2_WRITE_REGW(&adapter->hw, REG_MB_TXD_WR_IDX,
911 (adapter->txd_write_ptr >> 2));
912
913 mmiowb();
914 dev_kfree_skb_any(skb);
915 return NETDEV_TX_OK;
916 }
917
918 /*
919 * atl2_change_mtu - Change the Maximum Transfer Unit
920 * @netdev: network interface device structure
921 * @new_mtu: new value for maximum frame size
922 *
923 * Returns 0 on success, negative on failure
924 */
925 static int atl2_change_mtu(struct net_device *netdev, int new_mtu)
926 {
927 struct atl2_adapter *adapter = netdev_priv(netdev);
928 struct atl2_hw *hw = &adapter->hw;
929
930 if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_SIZE)))
931 return -EINVAL;
932
933 /* set MTU */
934 if (hw->max_frame_size != new_mtu) {
935 netdev->mtu = new_mtu;
936 ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ENET_HEADER_SIZE +
937 VLAN_SIZE + ETHERNET_FCS_SIZE);
938 }
939
940 return 0;
941 }
942
943 /*
944 * atl2_set_mac - Change the Ethernet Address of the NIC
945 * @netdev: network interface device structure
946 * @p: pointer to an address structure
947 *
948 * Returns 0 on success, negative on failure
949 */
950 static int atl2_set_mac(struct net_device *netdev, void *p)
951 {
952 struct atl2_adapter *adapter = netdev_priv(netdev);
953 struct sockaddr *addr = p;
954
955 if (!is_valid_ether_addr(addr->sa_data))
956 return -EADDRNOTAVAIL;
957
958 if (netif_running(netdev))
959 return -EBUSY;
960
961 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
962 memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
963
964 atl2_set_mac_addr(&adapter->hw);
965
966 return 0;
967 }
968
969 /*
970 * atl2_mii_ioctl -
971 * @netdev:
972 * @ifreq:
973 * @cmd:
974 */
975 static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
976 {
977 struct atl2_adapter *adapter = netdev_priv(netdev);
978 struct mii_ioctl_data *data = if_mii(ifr);
979 unsigned long flags;
980
981 switch (cmd) {
982 case SIOCGMIIPHY:
983 data->phy_id = 0;
984 break;
985 case SIOCGMIIREG:
986 spin_lock_irqsave(&adapter->stats_lock, flags);
987 if (atl2_read_phy_reg(&adapter->hw,
988 data->reg_num & 0x1F, &data->val_out)) {
989 spin_unlock_irqrestore(&adapter->stats_lock, flags);
990 return -EIO;
991 }
992 spin_unlock_irqrestore(&adapter->stats_lock, flags);
993 break;
994 case SIOCSMIIREG:
995 if (data->reg_num & ~(0x1F))
996 return -EFAULT;
997 spin_lock_irqsave(&adapter->stats_lock, flags);
998 if (atl2_write_phy_reg(&adapter->hw, data->reg_num,
999 data->val_in)) {
1000 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1001 return -EIO;
1002 }
1003 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1004 break;
1005 default:
1006 return -EOPNOTSUPP;
1007 }
1008 return 0;
1009 }
1010
1011 /*
1012 * atl2_ioctl -
1013 * @netdev:
1014 * @ifreq:
1015 * @cmd:
1016 */
1017 static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1018 {
1019 switch (cmd) {
1020 case SIOCGMIIPHY:
1021 case SIOCGMIIREG:
1022 case SIOCSMIIREG:
1023 return atl2_mii_ioctl(netdev, ifr, cmd);
1024 #ifdef ETHTOOL_OPS_COMPAT
1025 case SIOCETHTOOL:
1026 return ethtool_ioctl(ifr);
1027 #endif
1028 default:
1029 return -EOPNOTSUPP;
1030 }
1031 }
1032
1033 /*
1034 * atl2_tx_timeout - Respond to a Tx Hang
1035 * @netdev: network interface device structure
1036 */
1037 static void atl2_tx_timeout(struct net_device *netdev)
1038 {
1039 struct atl2_adapter *adapter = netdev_priv(netdev);
1040
1041 /* Do the reset outside of interrupt context */
1042 schedule_work(&adapter->reset_task);
1043 }
1044
1045 /*
1046 * atl2_watchdog - Timer Call-back
1047 * @data: pointer to netdev cast into an unsigned long
1048 */
1049 static void atl2_watchdog(unsigned long data)
1050 {
1051 struct atl2_adapter *adapter = (struct atl2_adapter *) data;
1052
1053 if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
1054 u32 drop_rxd, drop_rxs;
1055 unsigned long flags;
1056
1057 spin_lock_irqsave(&adapter->stats_lock, flags);
1058 drop_rxd = ATL2_READ_REG(&adapter->hw, REG_STS_RXD_OV);
1059 drop_rxs = ATL2_READ_REG(&adapter->hw, REG_STS_RXS_OV);
1060 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1061
1062 adapter->netdev->stats.rx_over_errors += drop_rxd + drop_rxs;
1063
1064 /* Reset the timer */
1065 mod_timer(&adapter->watchdog_timer,
1066 round_jiffies(jiffies + 4 * HZ));
1067 }
1068 }
1069
1070 /*
1071 * atl2_phy_config - Timer Call-back
1072 * @data: pointer to netdev cast into an unsigned long
1073 */
1074 static void atl2_phy_config(unsigned long data)
1075 {
1076 struct atl2_adapter *adapter = (struct atl2_adapter *) data;
1077 struct atl2_hw *hw = &adapter->hw;
1078 unsigned long flags;
1079
1080 spin_lock_irqsave(&adapter->stats_lock, flags);
1081 atl2_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
1082 atl2_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN |
1083 MII_CR_RESTART_AUTO_NEG);
1084 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1085 clear_bit(0, &adapter->cfg_phy);
1086 }
1087
1088 static int atl2_up(struct atl2_adapter *adapter)
1089 {
1090 struct net_device *netdev = adapter->netdev;
1091 int err = 0;
1092 u32 val;
1093
1094 /* hardware has been reset, we need to reload some things */
1095
1096 err = atl2_init_hw(&adapter->hw);
1097 if (err) {
1098 err = -EIO;
1099 return err;
1100 }
1101
1102 atl2_set_multi(netdev);
1103 init_ring_ptrs(adapter);
1104
1105 atl2_restore_vlan(adapter);
1106
1107 if (atl2_configure(adapter)) {
1108 err = -EIO;
1109 goto err_up;
1110 }
1111
1112 clear_bit(__ATL2_DOWN, &adapter->flags);
1113
1114 val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
1115 ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, val |
1116 MASTER_CTRL_MANUAL_INT);
1117
1118 atl2_irq_enable(adapter);
1119
1120 err_up:
1121 return err;
1122 }
1123
1124 static void atl2_reinit_locked(struct atl2_adapter *adapter)
1125 {
1126 WARN_ON(in_interrupt());
1127 while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
1128 msleep(1);
1129 atl2_down(adapter);
1130 atl2_up(adapter);
1131 clear_bit(__ATL2_RESETTING, &adapter->flags);
1132 }
1133
1134 static void atl2_reset_task(struct work_struct *work)
1135 {
1136 struct atl2_adapter *adapter;
1137 adapter = container_of(work, struct atl2_adapter, reset_task);
1138
1139 atl2_reinit_locked(adapter);
1140 }
1141
1142 static void atl2_setup_mac_ctrl(struct atl2_adapter *adapter)
1143 {
1144 u32 value;
1145 struct atl2_hw *hw = &adapter->hw;
1146 struct net_device *netdev = adapter->netdev;
1147
1148 /* Config MAC CTRL Register */
1149 value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
1150
1151 /* duplex */
1152 if (FULL_DUPLEX == adapter->link_duplex)
1153 value |= MAC_CTRL_DUPLX;
1154
1155 /* flow control */
1156 value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
1157
1158 /* PAD & CRC */
1159 value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
1160
1161 /* preamble length */
1162 value |= (((u32)adapter->hw.preamble_len & MAC_CTRL_PRMLEN_MASK) <<
1163 MAC_CTRL_PRMLEN_SHIFT);
1164
1165 /* vlan */
1166 __atl2_vlan_mode(netdev->features, &value);
1167
1168 /* filter mode */
1169 value |= MAC_CTRL_BC_EN;
1170 if (netdev->flags & IFF_PROMISC)
1171 value |= MAC_CTRL_PROMIS_EN;
1172 else if (netdev->flags & IFF_ALLMULTI)
1173 value |= MAC_CTRL_MC_ALL_EN;
1174
1175 /* half retry buffer */
1176 value |= (((u32)(adapter->hw.retry_buf &
1177 MAC_CTRL_HALF_LEFT_BUF_MASK)) << MAC_CTRL_HALF_LEFT_BUF_SHIFT);
1178
1179 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1180 }
1181
1182 static int atl2_check_link(struct atl2_adapter *adapter)
1183 {
1184 struct atl2_hw *hw = &adapter->hw;
1185 struct net_device *netdev = adapter->netdev;
1186 int ret_val;
1187 u16 speed, duplex, phy_data;
1188 int reconfig = 0;
1189
1190 /* MII_BMSR must read twise */
1191 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1192 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1193 if (!(phy_data&BMSR_LSTATUS)) { /* link down */
1194 if (netif_carrier_ok(netdev)) { /* old link state: Up */
1195 u32 value;
1196 /* disable rx */
1197 value = ATL2_READ_REG(hw, REG_MAC_CTRL);
1198 value &= ~MAC_CTRL_RX_EN;
1199 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1200 adapter->link_speed = SPEED_0;
1201 netif_carrier_off(netdev);
1202 netif_stop_queue(netdev);
1203 }
1204 return 0;
1205 }
1206
1207 /* Link Up */
1208 ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
1209 if (ret_val)
1210 return ret_val;
1211 switch (hw->MediaType) {
1212 case MEDIA_TYPE_100M_FULL:
1213 if (speed != SPEED_100 || duplex != FULL_DUPLEX)
1214 reconfig = 1;
1215 break;
1216 case MEDIA_TYPE_100M_HALF:
1217 if (speed != SPEED_100 || duplex != HALF_DUPLEX)
1218 reconfig = 1;
1219 break;
1220 case MEDIA_TYPE_10M_FULL:
1221 if (speed != SPEED_10 || duplex != FULL_DUPLEX)
1222 reconfig = 1;
1223 break;
1224 case MEDIA_TYPE_10M_HALF:
1225 if (speed != SPEED_10 || duplex != HALF_DUPLEX)
1226 reconfig = 1;
1227 break;
1228 }
1229 /* link result is our setting */
1230 if (reconfig == 0) {
1231 if (adapter->link_speed != speed ||
1232 adapter->link_duplex != duplex) {
1233 adapter->link_speed = speed;
1234 adapter->link_duplex = duplex;
1235 atl2_setup_mac_ctrl(adapter);
1236 printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n",
1237 atl2_driver_name, netdev->name,
1238 adapter->link_speed,
1239 adapter->link_duplex == FULL_DUPLEX ?
1240 "Full Duplex" : "Half Duplex");
1241 }
1242
1243 if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
1244 netif_carrier_on(netdev);
1245 netif_wake_queue(netdev);
1246 }
1247 return 0;
1248 }
1249
1250 /* change original link status */
1251 if (netif_carrier_ok(netdev)) {
1252 u32 value;
1253 /* disable rx */
1254 value = ATL2_READ_REG(hw, REG_MAC_CTRL);
1255 value &= ~MAC_CTRL_RX_EN;
1256 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1257
1258 adapter->link_speed = SPEED_0;
1259 netif_carrier_off(netdev);
1260 netif_stop_queue(netdev);
1261 }
1262
1263 /* auto-neg, insert timer to re-config phy
1264 * (if interval smaller than 5 seconds, something strange) */
1265 if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
1266 if (!test_and_set_bit(0, &adapter->cfg_phy))
1267 mod_timer(&adapter->phy_config_timer,
1268 round_jiffies(jiffies + 5 * HZ));
1269 }
1270
1271 return 0;
1272 }
1273
1274 /*
1275 * atl2_link_chg_task - deal with link change event Out of interrupt context
1276 * @netdev: network interface device structure
1277 */
1278 static void atl2_link_chg_task(struct work_struct *work)
1279 {
1280 struct atl2_adapter *adapter;
1281 unsigned long flags;
1282
1283 adapter = container_of(work, struct atl2_adapter, link_chg_task);
1284
1285 spin_lock_irqsave(&adapter->stats_lock, flags);
1286 atl2_check_link(adapter);
1287 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1288 }
1289
1290 static void atl2_setup_pcicmd(struct pci_dev *pdev)
1291 {
1292 u16 cmd;
1293
1294 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
1295
1296 if (cmd & PCI_COMMAND_INTX_DISABLE)
1297 cmd &= ~PCI_COMMAND_INTX_DISABLE;
1298 if (cmd & PCI_COMMAND_IO)
1299 cmd &= ~PCI_COMMAND_IO;
1300 if (0 == (cmd & PCI_COMMAND_MEMORY))
1301 cmd |= PCI_COMMAND_MEMORY;
1302 if (0 == (cmd & PCI_COMMAND_MASTER))
1303 cmd |= PCI_COMMAND_MASTER;
1304 pci_write_config_word(pdev, PCI_COMMAND, cmd);
1305
1306 /*
1307 * some motherboards BIOS(PXE/EFI) driver may set PME
1308 * while they transfer control to OS (Windows/Linux)
1309 * so we should clear this bit before NIC work normally
1310 */
1311 pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
1312 }
1313
1314 #ifdef CONFIG_NET_POLL_CONTROLLER
1315 static void atl2_poll_controller(struct net_device *netdev)
1316 {
1317 disable_irq(netdev->irq);
1318 atl2_intr(netdev->irq, netdev);
1319 enable_irq(netdev->irq);
1320 }
1321 #endif
1322
1323
1324 static const struct net_device_ops atl2_netdev_ops = {
1325 .ndo_open = atl2_open,
1326 .ndo_stop = atl2_close,
1327 .ndo_start_xmit = atl2_xmit_frame,
1328 .ndo_set_multicast_list = atl2_set_multi,
1329 .ndo_validate_addr = eth_validate_addr,
1330 .ndo_set_mac_address = atl2_set_mac,
1331 .ndo_change_mtu = atl2_change_mtu,
1332 .ndo_fix_features = atl2_fix_features,
1333 .ndo_set_features = atl2_set_features,
1334 .ndo_do_ioctl = atl2_ioctl,
1335 .ndo_tx_timeout = atl2_tx_timeout,
1336 #ifdef CONFIG_NET_POLL_CONTROLLER
1337 .ndo_poll_controller = atl2_poll_controller,
1338 #endif
1339 };
1340
1341 /*
1342 * atl2_probe - Device Initialization Routine
1343 * @pdev: PCI device information struct
1344 * @ent: entry in atl2_pci_tbl
1345 *
1346 * Returns 0 on success, negative on failure
1347 *
1348 * atl2_probe initializes an adapter identified by a pci_dev structure.
1349 * The OS initialization, configuring of the adapter private structure,
1350 * and a hardware reset occur.
1351 */
1352 static int __devinit atl2_probe(struct pci_dev *pdev,
1353 const struct pci_device_id *ent)
1354 {
1355 struct net_device *netdev;
1356 struct atl2_adapter *adapter;
1357 static int cards_found;
1358 unsigned long mmio_start;
1359 int mmio_len;
1360 int err;
1361
1362 cards_found = 0;
1363
1364 err = pci_enable_device(pdev);
1365 if (err)
1366 return err;
1367
1368 /*
1369 * atl2 is a shared-high-32-bit device, so we're stuck with 32-bit DMA
1370 * until the kernel has the proper infrastructure to support 64-bit DMA
1371 * on these devices.
1372 */
1373 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
1374 pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1375 printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
1376 goto err_dma;
1377 }
1378
1379 /* Mark all PCI regions associated with PCI device
1380 * pdev as being reserved by owner atl2_driver_name */
1381 err = pci_request_regions(pdev, atl2_driver_name);
1382 if (err)
1383 goto err_pci_reg;
1384
1385 /* Enables bus-mastering on the device and calls
1386 * pcibios_set_master to do the needed arch specific settings */
1387 pci_set_master(pdev);
1388
1389 err = -ENOMEM;
1390 netdev = alloc_etherdev(sizeof(struct atl2_adapter));
1391 if (!netdev)
1392 goto err_alloc_etherdev;
1393
1394 SET_NETDEV_DEV(netdev, &pdev->dev);
1395
1396 pci_set_drvdata(pdev, netdev);
1397 adapter = netdev_priv(netdev);
1398 adapter->netdev = netdev;
1399 adapter->pdev = pdev;
1400 adapter->hw.back = adapter;
1401
1402 mmio_start = pci_resource_start(pdev, 0x0);
1403 mmio_len = pci_resource_len(pdev, 0x0);
1404
1405 adapter->hw.mem_rang = (u32)mmio_len;
1406 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
1407 if (!adapter->hw.hw_addr) {
1408 err = -EIO;
1409 goto err_ioremap;
1410 }
1411
1412 atl2_setup_pcicmd(pdev);
1413
1414 netdev->netdev_ops = &atl2_netdev_ops;
1415 atl2_set_ethtool_ops(netdev);
1416 netdev->watchdog_timeo = 5 * HZ;
1417 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
1418
1419 netdev->mem_start = mmio_start;
1420 netdev->mem_end = mmio_start + mmio_len;
1421 adapter->bd_number = cards_found;
1422 adapter->pci_using_64 = false;
1423
1424 /* setup the private structure */
1425 err = atl2_sw_init(adapter);
1426 if (err)
1427 goto err_sw_init;
1428
1429 err = -EIO;
1430
1431 netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_RX;
1432 netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
1433
1434 /* Init PHY as early as possible due to power saving issue */
1435 atl2_phy_init(&adapter->hw);
1436
1437 /* reset the controller to
1438 * put the device in a known good starting state */
1439
1440 if (atl2_reset_hw(&adapter->hw)) {
1441 err = -EIO;
1442 goto err_reset;
1443 }
1444
1445 /* copy the MAC address out of the EEPROM */
1446 atl2_read_mac_addr(&adapter->hw);
1447 memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
1448 /* FIXME: do we still need this? */
1449 #ifdef ETHTOOL_GPERMADDR
1450 memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
1451
1452 if (!is_valid_ether_addr(netdev->perm_addr)) {
1453 #else
1454 if (!is_valid_ether_addr(netdev->dev_addr)) {
1455 #endif
1456 err = -EIO;
1457 goto err_eeprom;
1458 }
1459
1460 atl2_check_options(adapter);
1461
1462 init_timer(&adapter->watchdog_timer);
1463 adapter->watchdog_timer.function = atl2_watchdog;
1464 adapter->watchdog_timer.data = (unsigned long) adapter;
1465
1466 init_timer(&adapter->phy_config_timer);
1467 adapter->phy_config_timer.function = atl2_phy_config;
1468 adapter->phy_config_timer.data = (unsigned long) adapter;
1469
1470 INIT_WORK(&adapter->reset_task, atl2_reset_task);
1471 INIT_WORK(&adapter->link_chg_task, atl2_link_chg_task);
1472
1473 strcpy(netdev->name, "eth%d"); /* ?? */
1474 err = register_netdev(netdev);
1475 if (err)
1476 goto err_register;
1477
1478 /* assume we have no link for now */
1479 netif_carrier_off(netdev);
1480 netif_stop_queue(netdev);
1481
1482 cards_found++;
1483
1484 return 0;
1485
1486 err_reset:
1487 err_register:
1488 err_sw_init:
1489 err_eeprom:
1490 iounmap(adapter->hw.hw_addr);
1491 err_ioremap:
1492 free_netdev(netdev);
1493 err_alloc_etherdev:
1494 pci_release_regions(pdev);
1495 err_pci_reg:
1496 err_dma:
1497 pci_disable_device(pdev);
1498 return err;
1499 }
1500
1501 /*
1502 * atl2_remove - Device Removal Routine
1503 * @pdev: PCI device information struct
1504 *
1505 * atl2_remove is called by the PCI subsystem to alert the driver
1506 * that it should release a PCI device. The could be caused by a
1507 * Hot-Plug event, or because the driver is going to be removed from
1508 * memory.
1509 */
1510 /* FIXME: write the original MAC address back in case it was changed from a
1511 * BIOS-set value, as in atl1 -- CHS */
1512 static void __devexit atl2_remove(struct pci_dev *pdev)
1513 {
1514 struct net_device *netdev = pci_get_drvdata(pdev);
1515 struct atl2_adapter *adapter = netdev_priv(netdev);
1516
1517 /* flush_scheduled work may reschedule our watchdog task, so
1518 * explicitly disable watchdog tasks from being rescheduled */
1519 set_bit(__ATL2_DOWN, &adapter->flags);
1520
1521 del_timer_sync(&adapter->watchdog_timer);
1522 del_timer_sync(&adapter->phy_config_timer);
1523 cancel_work_sync(&adapter->reset_task);
1524 cancel_work_sync(&adapter->link_chg_task);
1525
1526 unregister_netdev(netdev);
1527
1528 atl2_force_ps(&adapter->hw);
1529
1530 iounmap(adapter->hw.hw_addr);
1531 pci_release_regions(pdev);
1532
1533 free_netdev(netdev);
1534
1535 pci_disable_device(pdev);
1536 }
1537
1538 static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
1539 {
1540 struct net_device *netdev = pci_get_drvdata(pdev);
1541 struct atl2_adapter *adapter = netdev_priv(netdev);
1542 struct atl2_hw *hw = &adapter->hw;
1543 u16 speed, duplex;
1544 u32 ctrl = 0;
1545 u32 wufc = adapter->wol;
1546
1547 #ifdef CONFIG_PM
1548 int retval = 0;
1549 #endif
1550
1551 netif_device_detach(netdev);
1552
1553 if (netif_running(netdev)) {
1554 WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
1555 atl2_down(adapter);
1556 }
1557
1558 #ifdef CONFIG_PM
1559 retval = pci_save_state(pdev);
1560 if (retval)
1561 return retval;
1562 #endif
1563
1564 atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
1565 atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
1566 if (ctrl & BMSR_LSTATUS)
1567 wufc &= ~ATLX_WUFC_LNKC;
1568
1569 if (0 != (ctrl & BMSR_LSTATUS) && 0 != wufc) {
1570 u32 ret_val;
1571 /* get current link speed & duplex */
1572 ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
1573 if (ret_val) {
1574 printk(KERN_DEBUG
1575 "%s: get speed&duplex error while suspend\n",
1576 atl2_driver_name);
1577 goto wol_dis;
1578 }
1579
1580 ctrl = 0;
1581
1582 /* turn on magic packet wol */
1583 if (wufc & ATLX_WUFC_MAG)
1584 ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
1585
1586 /* ignore Link Chg event when Link is up */
1587 ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
1588
1589 /* Config MAC CTRL Register */
1590 ctrl = MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
1591 if (FULL_DUPLEX == adapter->link_duplex)
1592 ctrl |= MAC_CTRL_DUPLX;
1593 ctrl |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
1594 ctrl |= (((u32)adapter->hw.preamble_len &
1595 MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
1596 ctrl |= (((u32)(adapter->hw.retry_buf &
1597 MAC_CTRL_HALF_LEFT_BUF_MASK)) <<
1598 MAC_CTRL_HALF_LEFT_BUF_SHIFT);
1599 if (wufc & ATLX_WUFC_MAG) {
1600 /* magic packet maybe Broadcast&multicast&Unicast */
1601 ctrl |= MAC_CTRL_BC_EN;
1602 }
1603
1604 ATL2_WRITE_REG(hw, REG_MAC_CTRL, ctrl);
1605
1606 /* pcie patch */
1607 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1608 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1609 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1610 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1611 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1612 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1613
1614 pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
1615 goto suspend_exit;
1616 }
1617
1618 if (0 == (ctrl&BMSR_LSTATUS) && 0 != (wufc&ATLX_WUFC_LNKC)) {
1619 /* link is down, so only LINK CHG WOL event enable */
1620 ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
1621 ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
1622 ATL2_WRITE_REG(hw, REG_MAC_CTRL, 0);
1623
1624 /* pcie patch */
1625 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1626 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1627 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1628 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1629 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1630 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1631
1632 hw->phy_configured = false; /* re-init PHY when resume */
1633
1634 pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
1635
1636 goto suspend_exit;
1637 }
1638
1639 wol_dis:
1640 /* WOL disabled */
1641 ATL2_WRITE_REG(hw, REG_WOL_CTRL, 0);
1642
1643 /* pcie patch */
1644 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1645 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1646 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1647 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1648 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1649 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1650
1651 atl2_force_ps(hw);
1652 hw->phy_configured = false; /* re-init PHY when resume */
1653
1654 pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
1655
1656 suspend_exit:
1657 if (netif_running(netdev))
1658 atl2_free_irq(adapter);
1659
1660 pci_disable_device(pdev);
1661
1662 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1663
1664 return 0;
1665 }
1666
1667 #ifdef CONFIG_PM
1668 static int atl2_resume(struct pci_dev *pdev)
1669 {
1670 struct net_device *netdev = pci_get_drvdata(pdev);
1671 struct atl2_adapter *adapter = netdev_priv(netdev);
1672 u32 err;
1673
1674 pci_set_power_state(pdev, PCI_D0);
1675 pci_restore_state(pdev);
1676
1677 err = pci_enable_device(pdev);
1678 if (err) {
1679 printk(KERN_ERR
1680 "atl2: Cannot enable PCI device from suspend\n");
1681 return err;
1682 }
1683
1684 pci_set_master(pdev);
1685
1686 ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
1687
1688 pci_enable_wake(pdev, PCI_D3hot, 0);
1689 pci_enable_wake(pdev, PCI_D3cold, 0);
1690
1691 ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
1692
1693 if (netif_running(netdev)) {
1694 err = atl2_request_irq(adapter);
1695 if (err)
1696 return err;
1697 }
1698
1699 atl2_reset_hw(&adapter->hw);
1700
1701 if (netif_running(netdev))
1702 atl2_up(adapter);
1703
1704 netif_device_attach(netdev);
1705
1706 return 0;
1707 }
1708 #endif
1709
1710 static void atl2_shutdown(struct pci_dev *pdev)
1711 {
1712 atl2_suspend(pdev, PMSG_SUSPEND);
1713 }
1714
1715 static struct pci_driver atl2_driver = {
1716 .name = atl2_driver_name,
1717 .id_table = atl2_pci_tbl,
1718 .probe = atl2_probe,
1719 .remove = __devexit_p(atl2_remove),
1720 /* Power Management Hooks */
1721 .suspend = atl2_suspend,
1722 #ifdef CONFIG_PM
1723 .resume = atl2_resume,
1724 #endif
1725 .shutdown = atl2_shutdown,
1726 };
1727
1728 /*
1729 * atl2_init_module - Driver Registration Routine
1730 *
1731 * atl2_init_module is the first routine called when the driver is
1732 * loaded. All it does is register with the PCI subsystem.
1733 */
1734 static int __init atl2_init_module(void)
1735 {
1736 printk(KERN_INFO "%s - version %s\n", atl2_driver_string,
1737 atl2_driver_version);
1738 printk(KERN_INFO "%s\n", atl2_copyright);
1739 return pci_register_driver(&atl2_driver);
1740 }
1741 module_init(atl2_init_module);
1742
1743 /*
1744 * atl2_exit_module - Driver Exit Cleanup Routine
1745 *
1746 * atl2_exit_module is called just before the driver is removed
1747 * from memory.
1748 */
1749 static void __exit atl2_exit_module(void)
1750 {
1751 pci_unregister_driver(&atl2_driver);
1752 }
1753 module_exit(atl2_exit_module);
1754
1755 static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
1756 {
1757 struct atl2_adapter *adapter = hw->back;
1758 pci_read_config_word(adapter->pdev, reg, value);
1759 }
1760
1761 static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
1762 {
1763 struct atl2_adapter *adapter = hw->back;
1764 pci_write_config_word(adapter->pdev, reg, *value);
1765 }
1766
1767 static int atl2_get_settings(struct net_device *netdev,
1768 struct ethtool_cmd *ecmd)
1769 {
1770 struct atl2_adapter *adapter = netdev_priv(netdev);
1771 struct atl2_hw *hw = &adapter->hw;
1772
1773 ecmd->supported = (SUPPORTED_10baseT_Half |
1774 SUPPORTED_10baseT_Full |
1775 SUPPORTED_100baseT_Half |
1776 SUPPORTED_100baseT_Full |
1777 SUPPORTED_Autoneg |
1778 SUPPORTED_TP);
1779 ecmd->advertising = ADVERTISED_TP;
1780
1781 ecmd->advertising |= ADVERTISED_Autoneg;
1782 ecmd->advertising |= hw->autoneg_advertised;
1783
1784 ecmd->port = PORT_TP;
1785 ecmd->phy_address = 0;
1786 ecmd->transceiver = XCVR_INTERNAL;
1787
1788 if (adapter->link_speed != SPEED_0) {
1789 ethtool_cmd_speed_set(ecmd, adapter->link_speed);
1790 if (adapter->link_duplex == FULL_DUPLEX)
1791 ecmd->duplex = DUPLEX_FULL;
1792 else
1793 ecmd->duplex = DUPLEX_HALF;
1794 } else {
1795 ethtool_cmd_speed_set(ecmd, -1);
1796 ecmd->duplex = -1;
1797 }
1798
1799 ecmd->autoneg = AUTONEG_ENABLE;
1800 return 0;
1801 }
1802
1803 static int atl2_set_settings(struct net_device *netdev,
1804 struct ethtool_cmd *ecmd)
1805 {
1806 struct atl2_adapter *adapter = netdev_priv(netdev);
1807 struct atl2_hw *hw = &adapter->hw;
1808
1809 while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
1810 msleep(1);
1811
1812 if (ecmd->autoneg == AUTONEG_ENABLE) {
1813 #define MY_ADV_MASK (ADVERTISE_10_HALF | \
1814 ADVERTISE_10_FULL | \
1815 ADVERTISE_100_HALF| \
1816 ADVERTISE_100_FULL)
1817
1818 if ((ecmd->advertising & MY_ADV_MASK) == MY_ADV_MASK) {
1819 hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
1820 hw->autoneg_advertised = MY_ADV_MASK;
1821 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1822 ADVERTISE_100_FULL) {
1823 hw->MediaType = MEDIA_TYPE_100M_FULL;
1824 hw->autoneg_advertised = ADVERTISE_100_FULL;
1825 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1826 ADVERTISE_100_HALF) {
1827 hw->MediaType = MEDIA_TYPE_100M_HALF;
1828 hw->autoneg_advertised = ADVERTISE_100_HALF;
1829 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1830 ADVERTISE_10_FULL) {
1831 hw->MediaType = MEDIA_TYPE_10M_FULL;
1832 hw->autoneg_advertised = ADVERTISE_10_FULL;
1833 } else if ((ecmd->advertising & MY_ADV_MASK) ==
1834 ADVERTISE_10_HALF) {
1835 hw->MediaType = MEDIA_TYPE_10M_HALF;
1836 hw->autoneg_advertised = ADVERTISE_10_HALF;
1837 } else {
1838 clear_bit(__ATL2_RESETTING, &adapter->flags);
1839 return -EINVAL;
1840 }
1841 ecmd->advertising = hw->autoneg_advertised |
1842 ADVERTISED_TP | ADVERTISED_Autoneg;
1843 } else {
1844 clear_bit(__ATL2_RESETTING, &adapter->flags);
1845 return -EINVAL;
1846 }
1847
1848 /* reset the link */
1849 if (netif_running(adapter->netdev)) {
1850 atl2_down(adapter);
1851 atl2_up(adapter);
1852 } else
1853 atl2_reset_hw(&adapter->hw);
1854
1855 clear_bit(__ATL2_RESETTING, &adapter->flags);
1856 return 0;
1857 }
1858
1859 static u32 atl2_get_msglevel(struct net_device *netdev)
1860 {
1861 return 0;
1862 }
1863
1864 /*
1865 * It's sane for this to be empty, but we might want to take advantage of this.
1866 */
1867 static void atl2_set_msglevel(struct net_device *netdev, u32 data)
1868 {
1869 }
1870
1871 static int atl2_get_regs_len(struct net_device *netdev)
1872 {
1873 #define ATL2_REGS_LEN 42
1874 return sizeof(u32) * ATL2_REGS_LEN;
1875 }
1876
1877 static void atl2_get_regs(struct net_device *netdev,
1878 struct ethtool_regs *regs, void *p)
1879 {
1880 struct atl2_adapter *adapter = netdev_priv(netdev);
1881 struct atl2_hw *hw = &adapter->hw;
1882 u32 *regs_buff = p;
1883 u16 phy_data;
1884
1885 memset(p, 0, sizeof(u32) * ATL2_REGS_LEN);
1886
1887 regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
1888
1889 regs_buff[0] = ATL2_READ_REG(hw, REG_VPD_CAP);
1890 regs_buff[1] = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
1891 regs_buff[2] = ATL2_READ_REG(hw, REG_SPI_FLASH_CONFIG);
1892 regs_buff[3] = ATL2_READ_REG(hw, REG_TWSI_CTRL);
1893 regs_buff[4] = ATL2_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
1894 regs_buff[5] = ATL2_READ_REG(hw, REG_MASTER_CTRL);
1895 regs_buff[6] = ATL2_READ_REG(hw, REG_MANUAL_TIMER_INIT);
1896 regs_buff[7] = ATL2_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
1897 regs_buff[8] = ATL2_READ_REG(hw, REG_PHY_ENABLE);
1898 regs_buff[9] = ATL2_READ_REG(hw, REG_CMBDISDMA_TIMER);
1899 regs_buff[10] = ATL2_READ_REG(hw, REG_IDLE_STATUS);
1900 regs_buff[11] = ATL2_READ_REG(hw, REG_MDIO_CTRL);
1901 regs_buff[12] = ATL2_READ_REG(hw, REG_SERDES_LOCK);
1902 regs_buff[13] = ATL2_READ_REG(hw, REG_MAC_CTRL);
1903 regs_buff[14] = ATL2_READ_REG(hw, REG_MAC_IPG_IFG);
1904 regs_buff[15] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
1905 regs_buff[16] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR+4);
1906 regs_buff[17] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE);
1907 regs_buff[18] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE+4);
1908 regs_buff[19] = ATL2_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
1909 regs_buff[20] = ATL2_READ_REG(hw, REG_MTU);
1910 regs_buff[21] = ATL2_READ_REG(hw, REG_WOL_CTRL);
1911 regs_buff[22] = ATL2_READ_REG(hw, REG_SRAM_TXRAM_END);
1912 regs_buff[23] = ATL2_READ_REG(hw, REG_DESC_BASE_ADDR_HI);
1913 regs_buff[24] = ATL2_READ_REG(hw, REG_TXD_BASE_ADDR_LO);
1914 regs_buff[25] = ATL2_READ_REG(hw, REG_TXD_MEM_SIZE);
1915 regs_buff[26] = ATL2_READ_REG(hw, REG_TXS_BASE_ADDR_LO);
1916 regs_buff[27] = ATL2_READ_REG(hw, REG_TXS_MEM_SIZE);
1917 regs_buff[28] = ATL2_READ_REG(hw, REG_RXD_BASE_ADDR_LO);
1918 regs_buff[29] = ATL2_READ_REG(hw, REG_RXD_BUF_NUM);
1919 regs_buff[30] = ATL2_READ_REG(hw, REG_DMAR);
1920 regs_buff[31] = ATL2_READ_REG(hw, REG_TX_CUT_THRESH);
1921 regs_buff[32] = ATL2_READ_REG(hw, REG_DMAW);
1922 regs_buff[33] = ATL2_READ_REG(hw, REG_PAUSE_ON_TH);
1923 regs_buff[34] = ATL2_READ_REG(hw, REG_PAUSE_OFF_TH);
1924 regs_buff[35] = ATL2_READ_REG(hw, REG_MB_TXD_WR_IDX);
1925 regs_buff[36] = ATL2_READ_REG(hw, REG_MB_RXD_RD_IDX);
1926 regs_buff[38] = ATL2_READ_REG(hw, REG_ISR);
1927 regs_buff[39] = ATL2_READ_REG(hw, REG_IMR);
1928
1929 atl2_read_phy_reg(hw, MII_BMCR, &phy_data);
1930 regs_buff[40] = (u32)phy_data;
1931 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1932 regs_buff[41] = (u32)phy_data;
1933 }
1934
1935 static int atl2_get_eeprom_len(struct net_device *netdev)
1936 {
1937 struct atl2_adapter *adapter = netdev_priv(netdev);
1938
1939 if (!atl2_check_eeprom_exist(&adapter->hw))
1940 return 512;
1941 else
1942 return 0;
1943 }
1944
1945 static int atl2_get_eeprom(struct net_device *netdev,
1946 struct ethtool_eeprom *eeprom, u8 *bytes)
1947 {
1948 struct atl2_adapter *adapter = netdev_priv(netdev);
1949 struct atl2_hw *hw = &adapter->hw;
1950 u32 *eeprom_buff;
1951 int first_dword, last_dword;
1952 int ret_val = 0;
1953 int i;
1954
1955 if (eeprom->len == 0)
1956 return -EINVAL;
1957
1958 if (atl2_check_eeprom_exist(hw))
1959 return -EINVAL;
1960
1961 eeprom->magic = hw->vendor_id | (hw->device_id << 16);
1962
1963 first_dword = eeprom->offset >> 2;
1964 last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
1965
1966 eeprom_buff = kmalloc(sizeof(u32) * (last_dword - first_dword + 1),
1967 GFP_KERNEL);
1968 if (!eeprom_buff)
1969 return -ENOMEM;
1970
1971 for (i = first_dword; i < last_dword; i++) {
1972 if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) {
1973 ret_val = -EIO;
1974 goto free;
1975 }
1976 }
1977
1978 memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
1979 eeprom->len);
1980 free:
1981 kfree(eeprom_buff);
1982
1983 return ret_val;
1984 }
1985
1986 static int atl2_set_eeprom(struct net_device *netdev,
1987 struct ethtool_eeprom *eeprom, u8 *bytes)
1988 {
1989 struct atl2_adapter *adapter = netdev_priv(netdev);
1990 struct atl2_hw *hw = &adapter->hw;
1991 u32 *eeprom_buff;
1992 u32 *ptr;
1993 int max_len, first_dword, last_dword, ret_val = 0;
1994 int i;
1995
1996 if (eeprom->len == 0)
1997 return -EOPNOTSUPP;
1998
1999 if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
2000 return -EFAULT;
2001
2002 max_len = 512;
2003
2004 first_dword = eeprom->offset >> 2;
2005 last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
2006 eeprom_buff = kmalloc(max_len, GFP_KERNEL);
2007 if (!eeprom_buff)
2008 return -ENOMEM;
2009
2010 ptr = eeprom_buff;
2011
2012 if (eeprom->offset & 3) {
2013 /* need read/modify/write of first changed EEPROM word */
2014 /* only the second byte of the word is being modified */
2015 if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0]))) {
2016 ret_val = -EIO;
2017 goto out;
2018 }
2019 ptr++;
2020 }
2021 if (((eeprom->offset + eeprom->len) & 3)) {
2022 /*
2023 * need read/modify/write of last changed EEPROM word
2024 * only the first byte of the word is being modified
2025 */
2026 if (!atl2_read_eeprom(hw, last_dword * 4,
2027 &(eeprom_buff[last_dword - first_dword]))) {
2028 ret_val = -EIO;
2029 goto out;
2030 }
2031 }
2032
2033 /* Device's eeprom is always little-endian, word addressable */
2034 memcpy(ptr, bytes, eeprom->len);
2035
2036 for (i = 0; i < last_dword - first_dword + 1; i++) {
2037 if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i])) {
2038 ret_val = -EIO;
2039 goto out;
2040 }
2041 }
2042 out:
2043 kfree(eeprom_buff);
2044 return ret_val;
2045 }
2046
2047 static void atl2_get_drvinfo(struct net_device *netdev,
2048 struct ethtool_drvinfo *drvinfo)
2049 {
2050 struct atl2_adapter *adapter = netdev_priv(netdev);
2051
2052 strncpy(drvinfo->driver, atl2_driver_name, 32);
2053 strncpy(drvinfo->version, atl2_driver_version, 32);
2054 strncpy(drvinfo->fw_version, "L2", 32);
2055 strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
2056 drvinfo->n_stats = 0;
2057 drvinfo->testinfo_len = 0;
2058 drvinfo->regdump_len = atl2_get_regs_len(netdev);
2059 drvinfo->eedump_len = atl2_get_eeprom_len(netdev);
2060 }
2061
2062 static void atl2_get_wol(struct net_device *netdev,
2063 struct ethtool_wolinfo *wol)
2064 {
2065 struct atl2_adapter *adapter = netdev_priv(netdev);
2066
2067 wol->supported = WAKE_MAGIC;
2068 wol->wolopts = 0;
2069
2070 if (adapter->wol & ATLX_WUFC_EX)
2071 wol->wolopts |= WAKE_UCAST;
2072 if (adapter->wol & ATLX_WUFC_MC)
2073 wol->wolopts |= WAKE_MCAST;
2074 if (adapter->wol & ATLX_WUFC_BC)
2075 wol->wolopts |= WAKE_BCAST;
2076 if (adapter->wol & ATLX_WUFC_MAG)
2077 wol->wolopts |= WAKE_MAGIC;
2078 if (adapter->wol & ATLX_WUFC_LNKC)
2079 wol->wolopts |= WAKE_PHY;
2080 }
2081
2082 static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2083 {
2084 struct atl2_adapter *adapter = netdev_priv(netdev);
2085
2086 if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
2087 return -EOPNOTSUPP;
2088
2089 if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
2090 return -EOPNOTSUPP;
2091
2092 /* these settings will always override what we currently have */
2093 adapter->wol = 0;
2094
2095 if (wol->wolopts & WAKE_MAGIC)
2096 adapter->wol |= ATLX_WUFC_MAG;
2097 if (wol->wolopts & WAKE_PHY)
2098 adapter->wol |= ATLX_WUFC_LNKC;
2099
2100 return 0;
2101 }
2102
2103 static int atl2_nway_reset(struct net_device *netdev)
2104 {
2105 struct atl2_adapter *adapter = netdev_priv(netdev);
2106 if (netif_running(netdev))
2107 atl2_reinit_locked(adapter);
2108 return 0;
2109 }
2110
2111 static const struct ethtool_ops atl2_ethtool_ops = {
2112 .get_settings = atl2_get_settings,
2113 .set_settings = atl2_set_settings,
2114 .get_drvinfo = atl2_get_drvinfo,
2115 .get_regs_len = atl2_get_regs_len,
2116 .get_regs = atl2_get_regs,
2117 .get_wol = atl2_get_wol,
2118 .set_wol = atl2_set_wol,
2119 .get_msglevel = atl2_get_msglevel,
2120 .set_msglevel = atl2_set_msglevel,
2121 .nway_reset = atl2_nway_reset,
2122 .get_link = ethtool_op_get_link,
2123 .get_eeprom_len = atl2_get_eeprom_len,
2124 .get_eeprom = atl2_get_eeprom,
2125 .set_eeprom = atl2_set_eeprom,
2126 };
2127
2128 static void atl2_set_ethtool_ops(struct net_device *netdev)
2129 {
2130 SET_ETHTOOL_OPS(netdev, &atl2_ethtool_ops);
2131 }
2132
2133 #define LBYTESWAP(a) ((((a) & 0x00ff00ff) << 8) | \
2134 (((a) & 0xff00ff00) >> 8))
2135 #define LONGSWAP(a) ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16))
2136 #define SHORTSWAP(a) (((a) << 8) | ((a) >> 8))
2137
2138 /*
2139 * Reset the transmit and receive units; mask and clear all interrupts.
2140 *
2141 * hw - Struct containing variables accessed by shared code
2142 * return : 0 or idle status (if error)
2143 */
2144 static s32 atl2_reset_hw(struct atl2_hw *hw)
2145 {
2146 u32 icr;
2147 u16 pci_cfg_cmd_word;
2148 int i;
2149
2150 /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
2151 atl2_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
2152 if ((pci_cfg_cmd_word &
2153 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) !=
2154 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) {
2155 pci_cfg_cmd_word |=
2156 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER);
2157 atl2_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
2158 }
2159
2160 /* Clear Interrupt mask to stop board from generating
2161 * interrupts & Clear any pending interrupt events
2162 */
2163 /* FIXME */
2164 /* ATL2_WRITE_REG(hw, REG_IMR, 0); */
2165 /* ATL2_WRITE_REG(hw, REG_ISR, 0xffffffff); */
2166
2167 /* Issue Soft Reset to the MAC. This will reset the chip's
2168 * transmit, receive, DMA. It will not effect
2169 * the current PCI configuration. The global reset bit is self-
2170 * clearing, and should clear within a microsecond.
2171 */
2172 ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
2173 wmb();
2174 msleep(1); /* delay about 1ms */
2175
2176 /* Wait at least 10ms for All module to be Idle */
2177 for (i = 0; i < 10; i++) {
2178 icr = ATL2_READ_REG(hw, REG_IDLE_STATUS);
2179 if (!icr)
2180 break;
2181 msleep(1); /* delay 1 ms */
2182 cpu_relax();
2183 }
2184
2185 if (icr)
2186 return icr;
2187
2188 return 0;
2189 }
2190
2191 #define CUSTOM_SPI_CS_SETUP 2
2192 #define CUSTOM_SPI_CLK_HI 2
2193 #define CUSTOM_SPI_CLK_LO 2
2194 #define CUSTOM_SPI_CS_HOLD 2
2195 #define CUSTOM_SPI_CS_HI 3
2196
2197 static struct atl2_spi_flash_dev flash_table[] =
2198 {
2199 /* MFR WRSR READ PROGRAM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */
2200 {"Atmel", 0x0, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62 },
2201 {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60 },
2202 {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7 },
2203 };
2204
2205 static bool atl2_spi_read(struct atl2_hw *hw, u32 addr, u32 *buf)
2206 {
2207 int i;
2208 u32 value;
2209
2210 ATL2_WRITE_REG(hw, REG_SPI_DATA, 0);
2211 ATL2_WRITE_REG(hw, REG_SPI_ADDR, addr);
2212
2213 value = SPI_FLASH_CTRL_WAIT_READY |
2214 (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
2215 SPI_FLASH_CTRL_CS_SETUP_SHIFT |
2216 (CUSTOM_SPI_CLK_HI & SPI_FLASH_CTRL_CLK_HI_MASK) <<
2217 SPI_FLASH_CTRL_CLK_HI_SHIFT |
2218 (CUSTOM_SPI_CLK_LO & SPI_FLASH_CTRL_CLK_LO_MASK) <<
2219 SPI_FLASH_CTRL_CLK_LO_SHIFT |
2220 (CUSTOM_SPI_CS_HOLD & SPI_FLASH_CTRL_CS_HOLD_MASK) <<
2221 SPI_FLASH_CTRL_CS_HOLD_SHIFT |
2222 (CUSTOM_SPI_CS_HI & SPI_FLASH_CTRL_CS_HI_MASK) <<
2223 SPI_FLASH_CTRL_CS_HI_SHIFT |
2224 (0x1 & SPI_FLASH_CTRL_INS_MASK) << SPI_FLASH_CTRL_INS_SHIFT;
2225
2226 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2227
2228 value |= SPI_FLASH_CTRL_START;
2229
2230 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2231
2232 for (i = 0; i < 10; i++) {
2233 msleep(1);
2234 value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
2235 if (!(value & SPI_FLASH_CTRL_START))
2236 break;
2237 }
2238
2239 if (value & SPI_FLASH_CTRL_START)
2240 return false;
2241
2242 *buf = ATL2_READ_REG(hw, REG_SPI_DATA);
2243
2244 return true;
2245 }
2246
2247 /*
2248 * get_permanent_address
2249 * return 0 if get valid mac address,
2250 */
2251 static int get_permanent_address(struct atl2_hw *hw)
2252 {
2253 u32 Addr[2];
2254 u32 i, Control;
2255 u16 Register;
2256 u8 EthAddr[NODE_ADDRESS_SIZE];
2257 bool KeyValid;
2258
2259 if (is_valid_ether_addr(hw->perm_mac_addr))
2260 return 0;
2261
2262 Addr[0] = 0;
2263 Addr[1] = 0;
2264
2265 if (!atl2_check_eeprom_exist(hw)) { /* eeprom exists */
2266 Register = 0;
2267 KeyValid = false;
2268
2269 /* Read out all EEPROM content */
2270 i = 0;
2271 while (1) {
2272 if (atl2_read_eeprom(hw, i + 0x100, &Control)) {
2273 if (KeyValid) {
2274 if (Register == REG_MAC_STA_ADDR)
2275 Addr[0] = Control;
2276 else if (Register ==
2277 (REG_MAC_STA_ADDR + 4))
2278 Addr[1] = Control;
2279 KeyValid = false;
2280 } else if ((Control & 0xff) == 0x5A) {
2281 KeyValid = true;
2282 Register = (u16) (Control >> 16);
2283 } else {
2284 /* assume data end while encount an invalid KEYWORD */
2285 break;
2286 }
2287 } else {
2288 break; /* read error */
2289 }
2290 i += 4;
2291 }
2292
2293 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2294 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
2295
2296 if (is_valid_ether_addr(EthAddr)) {
2297 memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
2298 return 0;
2299 }
2300 return 1;
2301 }
2302
2303 /* see if SPI flash exists? */
2304 Addr[0] = 0;
2305 Addr[1] = 0;
2306 Register = 0;
2307 KeyValid = false;
2308 i = 0;
2309 while (1) {
2310 if (atl2_spi_read(hw, i + 0x1f000, &Control)) {
2311 if (KeyValid) {
2312 if (Register == REG_MAC_STA_ADDR)
2313 Addr[0] = Control;
2314 else if (Register == (REG_MAC_STA_ADDR + 4))
2315 Addr[1] = Control;
2316 KeyValid = false;
2317 } else if ((Control & 0xff) == 0x5A) {
2318 KeyValid = true;
2319 Register = (u16) (Control >> 16);
2320 } else {
2321 break; /* data end */
2322 }
2323 } else {
2324 break; /* read error */
2325 }
2326 i += 4;
2327 }
2328
2329 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2330 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]);
2331 if (is_valid_ether_addr(EthAddr)) {
2332 memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
2333 return 0;
2334 }
2335 /* maybe MAC-address is from BIOS */
2336 Addr[0] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
2337 Addr[1] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR + 4);
2338 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2339 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
2340
2341 if (is_valid_ether_addr(EthAddr)) {
2342 memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
2343 return 0;
2344 }
2345
2346 return 1;
2347 }
2348
2349 /*
2350 * Reads the adapter's MAC address from the EEPROM
2351 *
2352 * hw - Struct containing variables accessed by shared code
2353 */
2354 static s32 atl2_read_mac_addr(struct atl2_hw *hw)
2355 {
2356 u16 i;
2357
2358 if (get_permanent_address(hw)) {
2359 /* for test */
2360 /* FIXME: shouldn't we use random_ether_addr() here? */
2361 hw->perm_mac_addr[0] = 0x00;
2362 hw->perm_mac_addr[1] = 0x13;
2363 hw->perm_mac_addr[2] = 0x74;
2364 hw->perm_mac_addr[3] = 0x00;
2365 hw->perm_mac_addr[4] = 0x5c;
2366 hw->perm_mac_addr[5] = 0x38;
2367 }
2368
2369 for (i = 0; i < NODE_ADDRESS_SIZE; i++)
2370 hw->mac_addr[i] = hw->perm_mac_addr[i];
2371
2372 return 0;
2373 }
2374
2375 /*
2376 * Hashes an address to determine its location in the multicast table
2377 *
2378 * hw - Struct containing variables accessed by shared code
2379 * mc_addr - the multicast address to hash
2380 *
2381 * atl2_hash_mc_addr
2382 * purpose
2383 * set hash value for a multicast address
2384 * hash calcu processing :
2385 * 1. calcu 32bit CRC for multicast address
2386 * 2. reverse crc with MSB to LSB
2387 */
2388 static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr)
2389 {
2390 u32 crc32, value;
2391 int i;
2392
2393 value = 0;
2394 crc32 = ether_crc_le(6, mc_addr);
2395
2396 for (i = 0; i < 32; i++)
2397 value |= (((crc32 >> i) & 1) << (31 - i));
2398
2399 return value;
2400 }
2401
2402 /*
2403 * Sets the bit in the multicast table corresponding to the hash value.
2404 *
2405 * hw - Struct containing variables accessed by shared code
2406 * hash_value - Multicast address hash value
2407 */
2408 static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value)
2409 {
2410 u32 hash_bit, hash_reg;
2411 u32 mta;
2412
2413 /* The HASH Table is a register array of 2 32-bit registers.
2414 * It is treated like an array of 64 bits. We want to set
2415 * bit BitArray[hash_value]. So we figure out what register
2416 * the bit is in, read it, OR in the new bit, then write
2417 * back the new value. The register is determined by the
2418 * upper 7 bits of the hash value and the bit within that
2419 * register are determined by the lower 5 bits of the value.
2420 */
2421 hash_reg = (hash_value >> 31) & 0x1;
2422 hash_bit = (hash_value >> 26) & 0x1F;
2423
2424 mta = ATL2_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
2425
2426 mta |= (1 << hash_bit);
2427
2428 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
2429 }
2430
2431 /*
2432 * atl2_init_pcie - init PCIE module
2433 */
2434 static void atl2_init_pcie(struct atl2_hw *hw)
2435 {
2436 u32 value;
2437 value = LTSSM_TEST_MODE_DEF;
2438 ATL2_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
2439
2440 value = PCIE_DLL_TX_CTRL1_DEF;
2441 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, value);
2442 }
2443
2444 static void atl2_init_flash_opcode(struct atl2_hw *hw)
2445 {
2446 if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
2447 hw->flash_vendor = 0; /* ATMEL */
2448
2449 /* Init OP table */
2450 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_PROGRAM,
2451 flash_table[hw->flash_vendor].cmdPROGRAM);
2452 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_SC_ERASE,
2453 flash_table[hw->flash_vendor].cmdSECTOR_ERASE);
2454 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_CHIP_ERASE,
2455 flash_table[hw->flash_vendor].cmdCHIP_ERASE);
2456 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDID,
2457 flash_table[hw->flash_vendor].cmdRDID);
2458 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WREN,
2459 flash_table[hw->flash_vendor].cmdWREN);
2460 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDSR,
2461 flash_table[hw->flash_vendor].cmdRDSR);
2462 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WRSR,
2463 flash_table[hw->flash_vendor].cmdWRSR);
2464 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_READ,
2465 flash_table[hw->flash_vendor].cmdREAD);
2466 }
2467
2468 /********************************************************************
2469 * Performs basic configuration of the adapter.
2470 *
2471 * hw - Struct containing variables accessed by shared code
2472 * Assumes that the controller has previously been reset and is in a
2473 * post-reset uninitialized state. Initializes multicast table,
2474 * and Calls routines to setup link
2475 * Leaves the transmit and receive units disabled and uninitialized.
2476 ********************************************************************/
2477 static s32 atl2_init_hw(struct atl2_hw *hw)
2478 {
2479 u32 ret_val = 0;
2480
2481 atl2_init_pcie(hw);
2482
2483 /* Zero out the Multicast HASH table */
2484 /* clear the old settings from the multicast hash table */
2485 ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
2486 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
2487
2488 atl2_init_flash_opcode(hw);
2489
2490 ret_val = atl2_phy_init(hw);
2491
2492 return ret_val;
2493 }
2494
2495 /*
2496 * Detects the current speed and duplex settings of the hardware.
2497 *
2498 * hw - Struct containing variables accessed by shared code
2499 * speed - Speed of the connection
2500 * duplex - Duplex setting of the connection
2501 */
2502 static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
2503 u16 *duplex)
2504 {
2505 s32 ret_val;
2506 u16 phy_data;
2507
2508 /* Read PHY Specific Status Register (17) */
2509 ret_val = atl2_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
2510 if (ret_val)
2511 return ret_val;
2512
2513 if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
2514 return ATLX_ERR_PHY_RES;
2515
2516 switch (phy_data & MII_ATLX_PSSR_SPEED) {
2517 case MII_ATLX_PSSR_100MBS:
2518 *speed = SPEED_100;
2519 break;
2520 case MII_ATLX_PSSR_10MBS:
2521 *speed = SPEED_10;
2522 break;
2523 default:
2524 return ATLX_ERR_PHY_SPEED;
2525 break;
2526 }
2527
2528 if (phy_data & MII_ATLX_PSSR_DPLX)
2529 *duplex = FULL_DUPLEX;
2530 else
2531 *duplex = HALF_DUPLEX;
2532
2533 return 0;
2534 }
2535
2536 /*
2537 * Reads the value from a PHY register
2538 * hw - Struct containing variables accessed by shared code
2539 * reg_addr - address of the PHY register to read
2540 */
2541 static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data)
2542 {
2543 u32 val;
2544 int i;
2545
2546 val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
2547 MDIO_START |
2548 MDIO_SUP_PREAMBLE |
2549 MDIO_RW |
2550 MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
2551 ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
2552
2553 wmb();
2554
2555 for (i = 0; i < MDIO_WAIT_TIMES; i++) {
2556 udelay(2);
2557 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2558 if (!(val & (MDIO_START | MDIO_BUSY)))
2559 break;
2560 wmb();
2561 }
2562 if (!(val & (MDIO_START | MDIO_BUSY))) {
2563 *phy_data = (u16)val;
2564 return 0;
2565 }
2566
2567 return ATLX_ERR_PHY;
2568 }
2569
2570 /*
2571 * Writes a value to a PHY register
2572 * hw - Struct containing variables accessed by shared code
2573 * reg_addr - address of the PHY register to write
2574 * data - data to write to the PHY
2575 */
2576 static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data)
2577 {
2578 int i;
2579 u32 val;
2580
2581 val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
2582 (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
2583 MDIO_SUP_PREAMBLE |
2584 MDIO_START |
2585 MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
2586 ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
2587
2588 wmb();
2589
2590 for (i = 0; i < MDIO_WAIT_TIMES; i++) {
2591 udelay(2);
2592 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2593 if (!(val & (MDIO_START | MDIO_BUSY)))
2594 break;
2595
2596 wmb();
2597 }
2598
2599 if (!(val & (MDIO_START | MDIO_BUSY)))
2600 return 0;
2601
2602 return ATLX_ERR_PHY;
2603 }
2604
2605 /*
2606 * Configures PHY autoneg and flow control advertisement settings
2607 *
2608 * hw - Struct containing variables accessed by shared code
2609 */
2610 static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw)
2611 {
2612 s32 ret_val;
2613 s16 mii_autoneg_adv_reg;
2614
2615 /* Read the MII Auto-Neg Advertisement Register (Address 4). */
2616 mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
2617
2618 /* Need to parse autoneg_advertised and set up
2619 * the appropriate PHY registers. First we will parse for
2620 * autoneg_advertised software override. Since we can advertise
2621 * a plethora of combinations, we need to check each bit
2622 * individually.
2623 */
2624
2625 /* First we clear all the 10/100 mb speed bits in the Auto-Neg
2626 * Advertisement Register (Address 4) and the 1000 mb speed bits in
2627 * the 1000Base-T Control Register (Address 9). */
2628 mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
2629
2630 /* Need to parse MediaType and setup the
2631 * appropriate PHY registers. */
2632 switch (hw->MediaType) {
2633 case MEDIA_TYPE_AUTO_SENSOR:
2634 mii_autoneg_adv_reg |=
2635 (MII_AR_10T_HD_CAPS |
2636 MII_AR_10T_FD_CAPS |
2637 MII_AR_100TX_HD_CAPS|
2638 MII_AR_100TX_FD_CAPS);
2639 hw->autoneg_advertised =
2640 ADVERTISE_10_HALF |
2641 ADVERTISE_10_FULL |
2642 ADVERTISE_100_HALF|
2643 ADVERTISE_100_FULL;
2644 break;
2645 case MEDIA_TYPE_100M_FULL:
2646 mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
2647 hw->autoneg_advertised = ADVERTISE_100_FULL;
2648 break;
2649 case MEDIA_TYPE_100M_HALF:
2650 mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
2651 hw->autoneg_advertised = ADVERTISE_100_HALF;
2652 break;
2653 case MEDIA_TYPE_10M_FULL:
2654 mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
2655 hw->autoneg_advertised = ADVERTISE_10_FULL;
2656 break;
2657 default:
2658 mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
2659 hw->autoneg_advertised = ADVERTISE_10_HALF;
2660 break;
2661 }
2662
2663 /* flow control fixed to enable all */
2664 mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
2665
2666 hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
2667
2668 ret_val = atl2_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
2669
2670 if (ret_val)
2671 return ret_val;
2672
2673 return 0;
2674 }
2675
2676 /*
2677 * Resets the PHY and make all config validate
2678 *
2679 * hw - Struct containing variables accessed by shared code
2680 *
2681 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
2682 */
2683 static s32 atl2_phy_commit(struct atl2_hw *hw)
2684 {
2685 s32 ret_val;
2686 u16 phy_data;
2687
2688 phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
2689 ret_val = atl2_write_phy_reg(hw, MII_BMCR, phy_data);
2690 if (ret_val) {
2691 u32 val;
2692 int i;
2693 /* pcie serdes link may be down ! */
2694 for (i = 0; i < 25; i++) {
2695 msleep(1);
2696 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2697 if (!(val & (MDIO_START | MDIO_BUSY)))
2698 break;
2699 }
2700
2701 if (0 != (val & (MDIO_START | MDIO_BUSY))) {
2702 printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n");
2703 return ret_val;
2704 }
2705 }
2706 return 0;
2707 }
2708
2709 static s32 atl2_phy_init(struct atl2_hw *hw)
2710 {
2711 s32 ret_val;
2712 u16 phy_val;
2713
2714 if (hw->phy_configured)
2715 return 0;
2716
2717 /* Enable PHY */
2718 ATL2_WRITE_REGW(hw, REG_PHY_ENABLE, 1);
2719 ATL2_WRITE_FLUSH(hw);
2720 msleep(1);
2721
2722 /* check if the PHY is in powersaving mode */
2723 atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
2724 atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
2725
2726 /* 024E / 124E 0r 0274 / 1274 ? */
2727 if (phy_val & 0x1000) {
2728 phy_val &= ~0x1000;
2729 atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val);
2730 }
2731
2732 msleep(1);
2733
2734 /*Enable PHY LinkChange Interrupt */
2735 ret_val = atl2_write_phy_reg(hw, 18, 0xC00);
2736 if (ret_val)
2737 return ret_val;
2738
2739 /* setup AutoNeg parameters */
2740 ret_val = atl2_phy_setup_autoneg_adv(hw);
2741 if (ret_val)
2742 return ret_val;
2743
2744 /* SW.Reset & En-Auto-Neg to restart Auto-Neg */
2745 ret_val = atl2_phy_commit(hw);
2746 if (ret_val)
2747 return ret_val;
2748
2749 hw->phy_configured = true;
2750
2751 return ret_val;
2752 }
2753
2754 static void atl2_set_mac_addr(struct atl2_hw *hw)
2755 {
2756 u32 value;
2757 /* 00-0B-6A-F6-00-DC
2758 * 0: 6AF600DC 1: 000B
2759 * low dword */
2760 value = (((u32)hw->mac_addr[2]) << 24) |
2761 (((u32)hw->mac_addr[3]) << 16) |
2762 (((u32)hw->mac_addr[4]) << 8) |
2763 (((u32)hw->mac_addr[5]));
2764 ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
2765 /* hight dword */
2766 value = (((u32)hw->mac_addr[0]) << 8) |
2767 (((u32)hw->mac_addr[1]));
2768 ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
2769 }
2770
2771 /*
2772 * check_eeprom_exist
2773 * return 0 if eeprom exist
2774 */
2775 static int atl2_check_eeprom_exist(struct atl2_hw *hw)
2776 {
2777 u32 value;
2778
2779 value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
2780 if (value & SPI_FLASH_CTRL_EN_VPD) {
2781 value &= ~SPI_FLASH_CTRL_EN_VPD;
2782 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2783 }
2784 value = ATL2_READ_REGW(hw, REG_PCIE_CAP_LIST);
2785 return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
2786 }
2787
2788 /* FIXME: This doesn't look right. -- CHS */
2789 static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value)
2790 {
2791 return true;
2792 }
2793
2794 static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue)
2795 {
2796 int i;
2797 u32 Control;
2798
2799 if (Offset & 0x3)
2800 return false; /* address do not align */
2801
2802 ATL2_WRITE_REG(hw, REG_VPD_DATA, 0);
2803 Control = (Offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
2804 ATL2_WRITE_REG(hw, REG_VPD_CAP, Control);
2805
2806 for (i = 0; i < 10; i++) {
2807 msleep(2);
2808 Control = ATL2_READ_REG(hw, REG_VPD_CAP);
2809 if (Control & VPD_CAP_VPD_FLAG)
2810 break;
2811 }
2812
2813 if (Control & VPD_CAP_VPD_FLAG) {
2814 *pValue = ATL2_READ_REG(hw, REG_VPD_DATA);
2815 return true;
2816 }
2817 return false; /* timeout */
2818 }
2819
2820 static void atl2_force_ps(struct atl2_hw *hw)
2821 {
2822 u16 phy_val;
2823
2824 atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
2825 atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
2826 atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val | 0x1000);
2827
2828 atl2_write_phy_reg(hw, MII_DBG_ADDR, 2);
2829 atl2_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
2830 atl2_write_phy_reg(hw, MII_DBG_ADDR, 3);
2831 atl2_write_phy_reg(hw, MII_DBG_DATA, 0);
2832 }
2833
2834 /* This is the only thing that needs to be changed to adjust the
2835 * maximum number of ports that the driver can manage.
2836 */
2837 #define ATL2_MAX_NIC 4
2838
2839 #define OPTION_UNSET -1
2840 #define OPTION_DISABLED 0
2841 #define OPTION_ENABLED 1
2842
2843 /* All parameters are treated the same, as an integer array of values.
2844 * This macro just reduces the need to repeat the same declaration code
2845 * over and over (plus this helps to avoid typo bugs).
2846 */
2847 #define ATL2_PARAM_INIT {[0 ... ATL2_MAX_NIC] = OPTION_UNSET}
2848 #ifndef module_param_array
2849 /* Module Parameters are always initialized to -1, so that the driver
2850 * can tell the difference between no user specified value or the
2851 * user asking for the default value.
2852 * The true default values are loaded in when atl2_check_options is called.
2853 *
2854 * This is a GCC extension to ANSI C.
2855 * See the item "Labeled Elements in Initializers" in the section
2856 * "Extensions to the C Language Family" of the GCC documentation.
2857 */
2858
2859 #define ATL2_PARAM(X, desc) \
2860 static const int __devinitdata X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
2861 MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \
2862 MODULE_PARM_DESC(X, desc);
2863 #else
2864 #define ATL2_PARAM(X, desc) \
2865 static int __devinitdata X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
2866 static unsigned int num_##X; \
2867 module_param_array_named(X, X, int, &num_##X, 0); \
2868 MODULE_PARM_DESC(X, desc);
2869 #endif
2870
2871 /*
2872 * Transmit Memory Size
2873 * Valid Range: 64-2048
2874 * Default Value: 128
2875 */
2876 #define ATL2_MIN_TX_MEMSIZE 4 /* 4KB */
2877 #define ATL2_MAX_TX_MEMSIZE 64 /* 64KB */
2878 #define ATL2_DEFAULT_TX_MEMSIZE 8 /* 8KB */
2879 ATL2_PARAM(TxMemSize, "Bytes of Transmit Memory");
2880
2881 /*
2882 * Receive Memory Block Count
2883 * Valid Range: 16-512
2884 * Default Value: 128
2885 */
2886 #define ATL2_MIN_RXD_COUNT 16
2887 #define ATL2_MAX_RXD_COUNT 512
2888 #define ATL2_DEFAULT_RXD_COUNT 64
2889 ATL2_PARAM(RxMemBlock, "Number of receive memory block");
2890
2891 /*
2892 * User Specified MediaType Override
2893 *
2894 * Valid Range: 0-5
2895 * - 0 - auto-negotiate at all supported speeds
2896 * - 1 - only link at 1000Mbps Full Duplex
2897 * - 2 - only link at 100Mbps Full Duplex
2898 * - 3 - only link at 100Mbps Half Duplex
2899 * - 4 - only link at 10Mbps Full Duplex
2900 * - 5 - only link at 10Mbps Half Duplex
2901 * Default Value: 0
2902 */
2903 ATL2_PARAM(MediaType, "MediaType Select");
2904
2905 /*
2906 * Interrupt Moderate Timer in units of 2048 ns (~2 us)
2907 * Valid Range: 10-65535
2908 * Default Value: 45000(90ms)
2909 */
2910 #define INT_MOD_DEFAULT_CNT 100 /* 200us */
2911 #define INT_MOD_MAX_CNT 65000
2912 #define INT_MOD_MIN_CNT 50
2913 ATL2_PARAM(IntModTimer, "Interrupt Moderator Timer");
2914
2915 /*
2916 * FlashVendor
2917 * Valid Range: 0-2
2918 * 0 - Atmel
2919 * 1 - SST
2920 * 2 - ST
2921 */
2922 ATL2_PARAM(FlashVendor, "SPI Flash Vendor");
2923
2924 #define AUTONEG_ADV_DEFAULT 0x2F
2925 #define AUTONEG_ADV_MASK 0x2F
2926 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
2927
2928 #define FLASH_VENDOR_DEFAULT 0
2929 #define FLASH_VENDOR_MIN 0
2930 #define FLASH_VENDOR_MAX 2
2931
2932 struct atl2_option {
2933 enum { enable_option, range_option, list_option } type;
2934 char *name;
2935 char *err;
2936 int def;
2937 union {
2938 struct { /* range_option info */
2939 int min;
2940 int max;
2941 } r;
2942 struct { /* list_option info */
2943 int nr;
2944 struct atl2_opt_list { int i; char *str; } *p;
2945 } l;
2946 } arg;
2947 };
2948
2949 static int __devinit atl2_validate_option(int *value, struct atl2_option *opt)
2950 {
2951 int i;
2952 struct atl2_opt_list *ent;
2953
2954 if (*value == OPTION_UNSET) {
2955 *value = opt->def;
2956 return 0;
2957 }
2958
2959 switch (opt->type) {
2960 case enable_option:
2961 switch (*value) {
2962 case OPTION_ENABLED:
2963 printk(KERN_INFO "%s Enabled\n", opt->name);
2964 return 0;
2965 break;
2966 case OPTION_DISABLED:
2967 printk(KERN_INFO "%s Disabled\n", opt->name);
2968 return 0;
2969 break;
2970 }
2971 break;
2972 case range_option:
2973 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
2974 printk(KERN_INFO "%s set to %i\n", opt->name, *value);
2975 return 0;
2976 }
2977 break;
2978 case list_option:
2979 for (i = 0; i < opt->arg.l.nr; i++) {
2980 ent = &opt->arg.l.p[i];
2981 if (*value == ent->i) {
2982 if (ent->str[0] != '\0')
2983 printk(KERN_INFO "%s\n", ent->str);
2984 return 0;
2985 }
2986 }
2987 break;
2988 default:
2989 BUG();
2990 }
2991
2992 printk(KERN_INFO "Invalid %s specified (%i) %s\n",
2993 opt->name, *value, opt->err);
2994 *value = opt->def;
2995 return -1;
2996 }
2997
2998 /*
2999 * atl2_check_options - Range Checking for Command Line Parameters
3000 * @adapter: board private structure
3001 *
3002 * This routine checks all command line parameters for valid user
3003 * input. If an invalid value is given, or if no user specified
3004 * value exists, a default value is used. The final value is stored
3005 * in a variable in the adapter structure.
3006 */
3007 static void __devinit atl2_check_options(struct atl2_adapter *adapter)
3008 {
3009 int val;
3010 struct atl2_option opt;
3011 int bd = adapter->bd_number;
3012 if (bd >= ATL2_MAX_NIC) {
3013 printk(KERN_NOTICE "Warning: no configuration for board #%i\n",
3014 bd);
3015 printk(KERN_NOTICE "Using defaults for all values\n");
3016 #ifndef module_param_array
3017 bd = ATL2_MAX_NIC;
3018 #endif
3019 }
3020
3021 /* Bytes of Transmit Memory */
3022 opt.type = range_option;
3023 opt.name = "Bytes of Transmit Memory";
3024 opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE);
3025 opt.def = ATL2_DEFAULT_TX_MEMSIZE;
3026 opt.arg.r.min = ATL2_MIN_TX_MEMSIZE;
3027 opt.arg.r.max = ATL2_MAX_TX_MEMSIZE;
3028 #ifdef module_param_array
3029 if (num_TxMemSize > bd) {
3030 #endif
3031 val = TxMemSize[bd];
3032 atl2_validate_option(&val, &opt);
3033 adapter->txd_ring_size = ((u32) val) * 1024;
3034 #ifdef module_param_array
3035 } else
3036 adapter->txd_ring_size = ((u32)opt.def) * 1024;
3037 #endif
3038 /* txs ring size: */
3039 adapter->txs_ring_size = adapter->txd_ring_size / 128;
3040 if (adapter->txs_ring_size > 160)
3041 adapter->txs_ring_size = 160;
3042
3043 /* Receive Memory Block Count */
3044 opt.type = range_option;
3045 opt.name = "Number of receive memory block";
3046 opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT);
3047 opt.def = ATL2_DEFAULT_RXD_COUNT;
3048 opt.arg.r.min = ATL2_MIN_RXD_COUNT;
3049 opt.arg.r.max = ATL2_MAX_RXD_COUNT;
3050 #ifdef module_param_array
3051 if (num_RxMemBlock > bd) {
3052 #endif
3053 val = RxMemBlock[bd];
3054 atl2_validate_option(&val, &opt);
3055 adapter->rxd_ring_size = (u32)val;
3056 /* FIXME */
3057 /* ((u16)val)&~1; */ /* even number */
3058 #ifdef module_param_array
3059 } else
3060 adapter->rxd_ring_size = (u32)opt.def;
3061 #endif
3062 /* init RXD Flow control value */
3063 adapter->hw.fc_rxd_hi = (adapter->rxd_ring_size / 8) * 7;
3064 adapter->hw.fc_rxd_lo = (ATL2_MIN_RXD_COUNT / 8) >
3065 (adapter->rxd_ring_size / 12) ? (ATL2_MIN_RXD_COUNT / 8) :
3066 (adapter->rxd_ring_size / 12);
3067
3068 /* Interrupt Moderate Timer */
3069 opt.type = range_option;
3070 opt.name = "Interrupt Moderate Timer";
3071 opt.err = "using default of " __MODULE_STRING(INT_MOD_DEFAULT_CNT);
3072 opt.def = INT_MOD_DEFAULT_CNT;
3073 opt.arg.r.min = INT_MOD_MIN_CNT;
3074 opt.arg.r.max = INT_MOD_MAX_CNT;
3075 #ifdef module_param_array
3076 if (num_IntModTimer > bd) {
3077 #endif
3078 val = IntModTimer[bd];
3079 atl2_validate_option(&val, &opt);
3080 adapter->imt = (u16) val;
3081 #ifdef module_param_array
3082 } else
3083 adapter->imt = (u16)(opt.def);
3084 #endif
3085 /* Flash Vendor */
3086 opt.type = range_option;
3087 opt.name = "SPI Flash Vendor";
3088 opt.err = "using default of " __MODULE_STRING(FLASH_VENDOR_DEFAULT);
3089 opt.def = FLASH_VENDOR_DEFAULT;
3090 opt.arg.r.min = FLASH_VENDOR_MIN;
3091 opt.arg.r.max = FLASH_VENDOR_MAX;
3092 #ifdef module_param_array
3093 if (num_FlashVendor > bd) {
3094 #endif
3095 val = FlashVendor[bd];
3096 atl2_validate_option(&val, &opt);
3097 adapter->hw.flash_vendor = (u8) val;
3098 #ifdef module_param_array
3099 } else
3100 adapter->hw.flash_vendor = (u8)(opt.def);
3101 #endif
3102 /* MediaType */
3103 opt.type = range_option;
3104 opt.name = "Speed/Duplex Selection";
3105 opt.err = "using default of " __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR);
3106 opt.def = MEDIA_TYPE_AUTO_SENSOR;
3107 opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR;
3108 opt.arg.r.max = MEDIA_TYPE_10M_HALF;
3109 #ifdef module_param_array
3110 if (num_MediaType > bd) {
3111 #endif
3112 val = MediaType[bd];
3113 atl2_validate_option(&val, &opt);
3114 adapter->hw.MediaType = (u16) val;
3115 #ifdef module_param_array
3116 } else
3117 adapter->hw.MediaType = (u16)(opt.def);
3118 #endif
3119 }
linux-next