drivers/net/cxgb3/vsc8211.c

   1 /*
   2  * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
   3  *
   4  * This software is available to you under a choice of one of two
   5  * licenses.  You may choose to be licensed under the terms of the GNU
   6  * General Public License (GPL) Version 2, available from the file
   7  * COPYING in the main directory of this source tree, or the
   8  * OpenIB.org BSD license below:
   9  *
  10  *     Redistribution and use in source and binary forms, with or
  11  *     without modification, are permitted provided that the following
  12  *     conditions are met:
  13  *
  14  *      - Redistributions of source code must retain the above
  15  *        copyright notice, this list of conditions and the following
  16  *        disclaimer.
  17  *
  18  *      - Redistributions in binary form must reproduce the above
  19  *        copyright notice, this list of conditions and the following
  20  *        disclaimer in the documentation and/or other materials
  21  *        provided with the distribution.
  22  *
  23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30  * SOFTWARE.
  31  */
  32 #include "common.h"
  33
  34 /* VSC8211 PHY specific registers. */
  35 enum {
  36         VSC8211_SIGDET_CTRL = 19,
  37         VSC8211_EXT_CTRL = 23,
  38         VSC8211_INTR_ENABLE = 25,
  39         VSC8211_INTR_STATUS = 26,
  40         VSC8211_LED_CTRL = 27,
  41         VSC8211_AUX_CTRL_STAT = 28,
  42         VSC8211_EXT_PAGE_AXS = 31,
  43 };
  44
  45 enum {
  46         VSC_INTR_RX_ERR = 1 << 0,
  47         VSC_INTR_MS_ERR = 1 << 1,  /* master/slave resolution error */
  48         VSC_INTR_CABLE = 1 << 2,  /* cable impairment */
  49         VSC_INTR_FALSE_CARR = 1 << 3,  /* false carrier */
  50         VSC_INTR_MEDIA_CHG = 1 << 4,  /* AMS media change */
  51         VSC_INTR_RX_FIFO = 1 << 5,  /* Rx FIFO over/underflow */
  52         VSC_INTR_TX_FIFO = 1 << 6,  /* Tx FIFO over/underflow */
  53         VSC_INTR_DESCRAMBL = 1 << 7,  /* descrambler lock-lost */
  54         VSC_INTR_SYMBOL_ERR = 1 << 8,  /* symbol error */
  55         VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
  56         VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
  57         VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
  58         VSC_INTR_LINK_CHG = 1 << 13, /* link change */
  59         VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
  60         VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
  61 };
  62
  63 enum {
  64         VSC_CTRL_CLAUSE37_VIEW = 1 << 4,   /* Switch to Clause 37 view */
  65         VSC_CTRL_MEDIA_MODE_HI = 0xf000    /* High part of media mode select */
  66 };
  67
  68 #define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
  69                            VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
  70                            VSC_INTR_NEG_DONE)
  71 #define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
  72                    VSC_INTR_ENABLE)
  73
  74 /* PHY specific auxiliary control & status register fields */
  75 #define S_ACSR_ACTIPHY_TMR    0
  76 #define M_ACSR_ACTIPHY_TMR    0x3
  77 #define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
  78
  79 #define S_ACSR_SPEED    3
  80 #define M_ACSR_SPEED    0x3
  81 #define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
  82
  83 #define S_ACSR_DUPLEX 5
  84 #define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
  85
  86 #define S_ACSR_ACTIPHY 6
  87 #define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
  88
  89 /*
  90  * Reset the PHY.  This PHY completes reset immediately so we never wait.
  91  */
  92 static int vsc8211_reset(struct cphy *cphy, int wait)
  93 {
  94         return t3_phy_reset(cphy, MDIO_DEVAD_NONE, 0);
  95 }
  96
  97 static int vsc8211_intr_enable(struct cphy *cphy)
  98 {
  99         return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE,
 100                              INTR_MASK);
 101 }
 102
 103 static int vsc8211_intr_disable(struct cphy *cphy)
 104 {
 105         return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE, 0);
 106 }
 107
 108 static int vsc8211_intr_clear(struct cphy *cphy)
 109 {
 110         u32 val;
 111
 112         /* Clear PHY interrupts by reading the register. */
 113         return t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &val);
 114 }
 115
 116 static int vsc8211_autoneg_enable(struct cphy *cphy)
 117 {
 118         return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
 119                                    BMCR_PDOWN | BMCR_ISOLATE,
 120                                    BMCR_ANENABLE | BMCR_ANRESTART);
 121 }
 122
 123 static int vsc8211_autoneg_restart(struct cphy *cphy)
 124 {
 125         return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
 126                                    BMCR_PDOWN | BMCR_ISOLATE,
 127                                    BMCR_ANRESTART);
 128 }
 129
 130 static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 131                                    int *speed, int *duplex, int *fc)
 132 {
 133         unsigned int bmcr, status, lpa, adv;
 134         int err, sp = -1, dplx = -1, pause = 0;
 135
 136         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 137         if (!err)
 138                 err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 139         if (err)
 140                 return err;
 141
 142         if (link_ok) {
 143                 /*
 144                  * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
 145                  * once more to get the current link state.
 146                  */
 147                 if (!(status & BMSR_LSTATUS))
 148                         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
 149                                            &status);
 150                 if (err)
 151                         return err;
 152                 *link_ok = (status & BMSR_LSTATUS) != 0;
 153         }
 154         if (!(bmcr & BMCR_ANENABLE)) {
 155                 dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 156                 if (bmcr & BMCR_SPEED1000)
 157                         sp = SPEED_1000;
 158                 else if (bmcr & BMCR_SPEED100)
 159                         sp = SPEED_100;
 160                 else
 161                         sp = SPEED_10;
 162         } else if (status & BMSR_ANEGCOMPLETE) {
 163                 err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_AUX_CTRL_STAT,
 164                                    &status);
 165                 if (err)
 166                         return err;
 167
 168                 dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
 169                 sp = G_ACSR_SPEED(status);
 170                 if (sp == 0)
 171                         sp = SPEED_10;
 172                 else if (sp == 1)
 173                         sp = SPEED_100;
 174                 else
 175                         sp = SPEED_1000;
 176
 177                 if (fc && dplx == DUPLEX_FULL) {
 178                         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA,
 179                                            &lpa);
 180                         if (!err)
 181                                 err = t3_mdio_read(cphy, MDIO_DEVAD_NONE,
 182                                                    MII_ADVERTISE, &adv);
 183                         if (err)
 184                                 return err;
 185
 186                         if (lpa & adv & ADVERTISE_PAUSE_CAP)
 187                                 pause = PAUSE_RX | PAUSE_TX;
 188                         else if ((lpa & ADVERTISE_PAUSE_CAP) &&
 189                                  (lpa & ADVERTISE_PAUSE_ASYM) &&
 190                                  (adv & ADVERTISE_PAUSE_ASYM))
 191                                 pause = PAUSE_TX;
 192                         else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
 193                                  (adv & ADVERTISE_PAUSE_CAP))
 194                                 pause = PAUSE_RX;
 195                 }
 196         }
 197         if (speed)
 198                 *speed = sp;
 199         if (duplex)
 200                 *duplex = dplx;
 201         if (fc)
 202                 *fc = pause;
 203         return 0;
 204 }
 205
 206 static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 207                                          int *speed, int *duplex, int *fc)
 208 {
 209         unsigned int bmcr, status, lpa, adv;
 210         int err, sp = -1, dplx = -1, pause = 0;
 211
 212         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 213         if (!err)
 214                 err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 215         if (err)
 216                 return err;
 217
 218         if (link_ok) {
 219                 /*
 220                  * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
 221                  * once more to get the current link state.
 222                  */
 223                 if (!(status & BMSR_LSTATUS))
 224                         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
 225                                            &status);
 226                 if (err)
 227                         return err;
 228                 *link_ok = (status & BMSR_LSTATUS) != 0;
 229         }
 230         if (!(bmcr & BMCR_ANENABLE)) {
 231                 dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 232                 if (bmcr & BMCR_SPEED1000)
 233                         sp = SPEED_1000;
 234                 else if (bmcr & BMCR_SPEED100)
 235                         sp = SPEED_100;
 236                 else
 237                         sp = SPEED_10;
 238         } else if (status & BMSR_ANEGCOMPLETE) {
 239                 err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA, &lpa);
 240                 if (!err)
 241                         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_ADVERTISE,
 242                                            &adv);
 243                 if (err)
 244                         return err;
 245
 246                 if (adv & lpa & ADVERTISE_1000XFULL) {
 247                         dplx = DUPLEX_FULL;
 248                         sp = SPEED_1000;
 249                 } else if (adv & lpa & ADVERTISE_1000XHALF) {
 250                         dplx = DUPLEX_HALF;
 251                         sp = SPEED_1000;
 252                 }
 253
 254                 if (fc && dplx == DUPLEX_FULL) {
 255                         if (lpa & adv & ADVERTISE_1000XPAUSE)
 256                                 pause = PAUSE_RX | PAUSE_TX;
 257                         else if ((lpa & ADVERTISE_1000XPAUSE) &&
 258                                  (adv & lpa & ADVERTISE_1000XPSE_ASYM))
 259                                 pause = PAUSE_TX;
 260                         else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
 261                                  (adv & ADVERTISE_1000XPAUSE))
 262                                 pause = PAUSE_RX;
 263                 }
 264         }
 265         if (speed)
 266                 *speed = sp;
 267         if (duplex)
 268                 *duplex = dplx;
 269         if (fc)
 270                 *fc = pause;
 271         return 0;
 272 }
 273
 274 #ifdef UNUSED
 275 /*
 276  * Enable/disable auto MDI/MDI-X in forced link speed mode.
 277  */
 278 static int vsc8211_set_automdi(struct cphy *phy, int enable)
 279 {
 280         int err;
 281
 282         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0x52b5);
 283         if (err)
 284                 return err;
 285
 286         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 18, 0x12);
 287         if (err)
 288                 return err;
 289
 290         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 17, enable ? 0x2803 : 0x3003);
 291         if (err)
 292                 return err;
 293
 294         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 16, 0x87fa);
 295         if (err)
 296                 return err;
 297
 298         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 299         if (err)
 300                 return err;
 301
 302         return 0;
 303 }
 304
 305 int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
 306 {
 307         int err;
 308
 309         err = t3_set_phy_speed_duplex(phy, speed, duplex);
 310         if (!err)
 311                 err = vsc8211_set_automdi(phy, 1);
 312         return err;
 313 }
 314 #endif /* UNUSED */
 315
 316 static int vsc8211_power_down(struct cphy *cphy, int enable)
 317 {
 318         return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
 319                                    enable ? BMCR_PDOWN : 0);
 320 }
 321
 322 static int vsc8211_intr_handler(struct cphy *cphy)
 323 {
 324         unsigned int cause;
 325         int err, cphy_cause = 0;
 326
 327         err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &cause);
 328         if (err)
 329                 return err;
 330
 331         cause &= INTR_MASK;
 332         if (cause & CFG_CHG_INTR_MASK)
 333                 cphy_cause |= cphy_cause_link_change;
 334         if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
 335                 cphy_cause |= cphy_cause_fifo_error;
 336         return cphy_cause;
 337 }
 338
 339 static struct cphy_ops vsc8211_ops = {
 340         .reset = vsc8211_reset,
 341         .intr_enable = vsc8211_intr_enable,
 342         .intr_disable = vsc8211_intr_disable,
 343         .intr_clear = vsc8211_intr_clear,
 344         .intr_handler = vsc8211_intr_handler,
 345         .autoneg_enable = vsc8211_autoneg_enable,
 346         .autoneg_restart = vsc8211_autoneg_restart,
 347         .advertise = t3_phy_advertise,
 348         .set_speed_duplex = t3_set_phy_speed_duplex,
 349         .get_link_status = vsc8211_get_link_status,
 350         .power_down = vsc8211_power_down,
 351 };
 352
 353 static struct cphy_ops vsc8211_fiber_ops = {
 354         .reset = vsc8211_reset,
 355         .intr_enable = vsc8211_intr_enable,
 356         .intr_disable = vsc8211_intr_disable,
 357         .intr_clear = vsc8211_intr_clear,
 358         .intr_handler = vsc8211_intr_handler,
 359         .autoneg_enable = vsc8211_autoneg_enable,
 360         .autoneg_restart = vsc8211_autoneg_restart,
 361         .advertise = t3_phy_advertise_fiber,
 362         .set_speed_duplex = t3_set_phy_speed_duplex,
 363         .get_link_status = vsc8211_get_link_status_fiber,
 364         .power_down = vsc8211_power_down,
 365 };
 366
 367 int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 368                         int phy_addr, const struct mdio_ops *mdio_ops)
 369 {
 370         int err;
 371         unsigned int val;
 372
 373         cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
 374                   SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
 375                   SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
 376                   SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
 377         msleep(20);       /* PHY needs ~10ms to start responding to MDIO */
 378
 379         err = t3_mdio_read(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL, &val);
 380         if (err)
 381                 return err;
 382         if (val & VSC_CTRL_MEDIA_MODE_HI) {
 383                 /* copper interface, just need to configure the LEDs */
 384                 return t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_LED_CTRL,
 385                                      0x100);
 386         }
 387
 388         phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
 389                     SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
 390         phy->desc = "1000BASE-X";
 391         phy->ops = &vsc8211_fiber_ops;
 392
 393         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 1);
 394         if (err)
 395                 return err;
 396
 397         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_SIGDET_CTRL, 1);
 398         if (err)
 399                 return err;
 400
 401         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 402         if (err)
 403                 return err;
 404
 405         err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL,
 406                             val | VSC_CTRL_CLAUSE37_VIEW);
 407         if (err)
 408                 return err;
 409
 410         err = vsc8211_reset(phy, 0);
 411         if (err)
 412                 return err;
 413
 414         udelay(5); /* delay after reset before next SMI */
 415         return 0;
 416 }