1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 /* Linux PRO/1000 Ethernet Driver main header file */
35 #include <linux/stddef.h>
36 #include <linux/module.h>
37 #include <linux/types.h>
38 #include <asm/byteorder.h>
39 #include <linux/init.h>
41 #include <linux/errno.h>
42 #include <linux/ioport.h>
43 #include <linux/pci.h>
44 #include <linux/kernel.h>
45 #include <linux/netdevice.h>
46 #include <linux/etherdevice.h>
47 #include <linux/skbuff.h>
48 #include <linux/delay.h>
49 #include <linux/timer.h>
50 #include <linux/slab.h>
51 #include <linux/vmalloc.h>
52 #include <linux/interrupt.h>
53 #include <linux/string.h>
54 #include <linux/pagemap.h>
55 #include <linux/dma-mapping.h>
56 #include <linux/bitops.h>
59 #include <linux/capability.h>
62 #include <linux/ipv6.h>
63 #include <linux/tcp.h>
64 #include <linux/udp.h>
65 #include <net/pkt_sched.h>
66 #include <linux/list.h>
67 #include <linux/reboot.h>
68 #include <net/checksum.h>
69 #include <linux/mii.h>
70 #include <linux/ethtool.h>
71 #include <linux/if_vlan.h>
77 #define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
78 PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
84 #define E1000_MAX_INTR 10
86 /* TX/RX descriptor defines */
87 #define E1000_DEFAULT_TXD 256
88 #define E1000_MAX_TXD 256
89 #define E1000_MIN_TXD 48
90 #define E1000_MAX_82544_TXD 4096
92 #define E1000_DEFAULT_RXD 256
93 #define E1000_MAX_RXD 256
94 #define E1000_MIN_RXD 48
95 #define E1000_MAX_82544_RXD 4096
97 #define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
98 #define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
100 /* this is the size past which hardware will drop packets when setting LPE=0 */
101 #define MAXIMUM_ETHERNET_VLAN_SIZE 1522
103 /* Supported Rx Buffer Sizes */
104 #define E1000_RXBUFFER_128 128 /* Used for packet split */
105 #define E1000_RXBUFFER_256 256 /* Used for packet split */
106 #define E1000_RXBUFFER_512 512
107 #define E1000_RXBUFFER_1024 1024
108 #define E1000_RXBUFFER_2048 2048
109 #define E1000_RXBUFFER_4096 4096
110 #define E1000_RXBUFFER_8192 8192
111 #define E1000_RXBUFFER_16384 16384
113 /* SmartSpeed delimiters */
114 #define E1000_SMARTSPEED_DOWNSHIFT 3
115 #define E1000_SMARTSPEED_MAX 15
117 /* Packet Buffer allocations */
118 #define E1000_PBA_BYTES_SHIFT 0xA
119 #define E1000_TX_HEAD_ADDR_SHIFT 7
120 #define E1000_PBA_TX_MASK 0xFFFF0000
122 /* Flow Control Watermarks */
123 #define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
124 #define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
126 #define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
128 /* How many Tx Descriptors do we need to call netif_wake_queue ? */
129 #define E1000_TX_QUEUE_WAKE 16
130 /* How many Rx Buffers do we bundle into one write to the hardware ? */
131 #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
133 #define AUTO_ALL_MODES 0
134 #define E1000_EEPROM_82544_APM 0x0004
135 #define E1000_EEPROM_APME 0x0400
137 #ifndef E1000_MASTER_SLAVE
138 /* Switch to override PHY master/slave setting */
139 #define E1000_MASTER_SLAVE e1000_ms_hw_default
142 #define E1000_MNG_VLAN_NONE (-1)
144 /* wrapper around a pointer to a socket buffer,
145 * so a DMA handle can be stored along with the buffer */
146 struct e1000_buffer
{
150 unsigned long time_stamp
;
156 struct e1000_tx_ring
{
157 /* pointer to the descriptor ring memory */
159 /* physical address of the descriptor ring */
161 /* length of descriptor ring in bytes */
163 /* number of descriptors in the ring */
165 /* next descriptor to associate a buffer with */
166 unsigned int next_to_use
;
167 /* next descriptor to check for DD status bit */
168 unsigned int next_to_clean
;
169 /* array of buffer information structs */
170 struct e1000_buffer
*buffer_info
;
177 struct e1000_rx_ring
{
178 /* pointer to the descriptor ring memory */
180 /* physical address of the descriptor ring */
182 /* length of descriptor ring in bytes */
184 /* number of descriptors in the ring */
186 /* next descriptor to associate a buffer with */
187 unsigned int next_to_use
;
188 /* next descriptor to check for DD status bit */
189 unsigned int next_to_clean
;
190 /* array of buffer information structs */
191 struct e1000_buffer
*buffer_info
;
192 struct sk_buff
*rx_skb_top
;
194 /* cpu for rx queue */
201 #define E1000_DESC_UNUSED(R) \
202 ((((R)->next_to_clean > (R)->next_to_use) \
203 ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
205 #define E1000_RX_DESC_EXT(R, i) \
206 (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
207 #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
208 #define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
209 #define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
210 #define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
212 /* board specific private data structure */
214 struct e1000_adapter
{
215 struct timer_list tx_fifo_stall_timer
;
216 struct timer_list watchdog_timer
;
217 struct timer_list phy_info_timer
;
218 unsigned long active_vlans
[BITS_TO_LONGS(VLAN_N_VID
)];
227 spinlock_t stats_lock
;
228 unsigned int total_tx_bytes
;
229 unsigned int total_tx_packets
;
230 unsigned int total_rx_bytes
;
231 unsigned int total_rx_packets
;
232 /* Interrupt Throttle Rate */
238 struct work_struct reset_task
;
242 struct e1000_tx_ring
*tx_ring
; /* One per active queue */
243 unsigned int restart_queue
;
246 u32 tx_abs_int_delay
;
251 u32 tx_timeout_count
;
255 u8 tx_timeout_factor
;
256 atomic_t tx_fifo_stall
;
261 bool (*clean_rx
)(struct e1000_adapter
*adapter
,
262 struct e1000_rx_ring
*rx_ring
,
263 int *work_done
, int work_to_do
);
264 void (*alloc_rx_buf
)(struct e1000_adapter
*adapter
,
265 struct e1000_rx_ring
*rx_ring
,
267 struct e1000_rx_ring
*rx_ring
; /* One per active queue */
268 struct napi_struct napi
;
275 u32 alloc_rx_buff_failed
;
277 u32 rx_abs_int_delay
;
282 /* OS defined structs */
283 struct net_device
*netdev
;
284 struct pci_dev
*pdev
;
286 /* structs defined in e1000_hw.h */
288 struct e1000_hw_stats stats
;
289 struct e1000_phy_info phy_info
;
290 struct e1000_phy_stats phy_stats
;
293 struct e1000_tx_ring test_tx_ring
;
294 struct e1000_rx_ring test_rx_ring
;
298 /* to not mess up cache alignment, always add to the bottom */
300 bool smart_power_down
; /* phy smart power down */
305 /* for ioport free */
311 struct work_struct fifo_stall_task
;
312 struct work_struct phy_info_task
;
322 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
324 extern struct net_device
*e1000_get_hw_dev(struct e1000_hw
*hw
);
325 #define e_dbg(format, arg...) \
326 netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
327 #define e_err(msglvl, format, arg...) \
328 netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
329 #define e_info(msglvl, format, arg...) \
330 netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
331 #define e_warn(msglvl, format, arg...) \
332 netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
333 #define e_notice(msglvl, format, arg...) \
334 netif_notice(adapter, msglvl, adapter->netdev, format, ## arg)
335 #define e_dev_info(format, arg...) \
336 dev_info(&adapter->pdev->dev, format, ## arg)
337 #define e_dev_warn(format, arg...) \
338 dev_warn(&adapter->pdev->dev, format, ## arg)
339 #define e_dev_err(format, arg...) \
340 dev_err(&adapter->pdev->dev, format, ## arg)
342 extern char e1000_driver_name
[];
343 extern const char e1000_driver_version
[];
345 extern int e1000_up(struct e1000_adapter
*adapter
);
346 extern void e1000_down(struct e1000_adapter
*adapter
);
347 extern void e1000_reinit_locked(struct e1000_adapter
*adapter
);
348 extern void e1000_reset(struct e1000_adapter
*adapter
);
349 extern int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u32 spd
, u8 dplx
);
350 extern int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
);
351 extern int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
);
352 extern void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
);
353 extern void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
);
354 extern void e1000_update_stats(struct e1000_adapter
*adapter
);
355 extern bool e1000_has_link(struct e1000_adapter
*adapter
);
356 extern void e1000_power_up_phy(struct e1000_adapter
*);
357 extern void e1000_set_ethtool_ops(struct net_device
*netdev
);
358 extern void e1000_check_options(struct e1000_adapter
*adapter
);
359 extern char *e1000_get_hw_dev_name(struct e1000_hw
*hw
);
361 #endif /* _E1000_H_ */