cris: add arch/cris/include/asm/serial.h
[linux-2.6/next.git] / drivers / net / pch_gbe / pch_gbe_phy.c
blob28bb9603d736cd11ad06e1efc9d96156fbcb3c1b
1 /*
2 * Copyright (C) 1999 - 2010 Intel Corporation.
3 * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
5 * This code was derived from the Intel e1000e Linux driver.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
21 #include "pch_gbe.h"
22 #include "pch_gbe_phy.h"
24 #define PHY_MAX_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
26 /* PHY 1000 MII Register/Bit Definitions */
27 /* PHY Registers defined by IEEE */
28 #define PHY_CONTROL 0x00 /* Control Register */
29 #define PHY_STATUS 0x01 /* Status Regiser */
30 #define PHY_ID1 0x02 /* Phy Id Register (word 1) */
31 #define PHY_ID2 0x03 /* Phy Id Register (word 2) */
32 #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
33 #define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
34 #define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Register */
35 #define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
36 #define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
37 #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Register */
38 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Register */
39 #define PHY_EXT_STATUS 0x0F /* Extended Status Register */
40 #define PHY_PHYSP_CONTROL 0x10 /* PHY Specific Control Register */
41 #define PHY_EXT_PHYSP_CONTROL 0x14 /* Extended PHY Specific Control Register */
42 #define PHY_LED_CONTROL 0x18 /* LED Control Register */
43 #define PHY_EXT_PHYSP_STATUS 0x1B /* Extended PHY Specific Status Register */
45 /* PHY Control Register */
46 #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
47 #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
48 #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
49 #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
50 #define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
51 #define MII_CR_POWER_DOWN 0x0800 /* Power down */
52 #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
53 #define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
54 #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
55 #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
56 #define MII_CR_SPEED_1000 0x0040
57 #define MII_CR_SPEED_100 0x2000
58 #define MII_CR_SPEED_10 0x0000
60 /* PHY Status Register */
61 #define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
62 #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
63 #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
64 #define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
65 #define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
66 #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
67 #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
68 #define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
69 #define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
70 #define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
71 #define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
72 #define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
73 #define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
74 #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
75 #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
77 /* Phy Id Register (word 2) */
78 #define PHY_REVISION_MASK 0x000F
80 /* PHY Specific Control Register */
81 #define PHYSP_CTRL_ASSERT_CRS_TX 0x0800
84 /* Default value of PHY register */
85 #define PHY_CONTROL_DEFAULT 0x1140 /* Control Register */
86 #define PHY_AUTONEG_ADV_DEFAULT 0x01e0 /* Autoneg Advertisement */
87 #define PHY_NEXT_PAGE_TX_DEFAULT 0x2001 /* Next Page TX */
88 #define PHY_1000T_CTRL_DEFAULT 0x0300 /* 1000Base-T Control Register */
89 #define PHY_PHYSP_CONTROL_DEFAULT 0x01EE /* PHY Specific Control Register */
91 /**
92 * pch_gbe_phy_get_id - Retrieve the PHY ID and revision
93 * @hw: Pointer to the HW structure
94 * Returns
95 * 0: Successful.
96 * Negative value: Failed.
98 s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw)
100 struct pch_gbe_phy_info *phy = &hw->phy;
101 s32 ret;
102 u16 phy_id1;
103 u16 phy_id2;
105 ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID1, &phy_id1);
106 if (ret)
107 return ret;
108 ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID2, &phy_id2);
109 if (ret)
110 return ret;
112 * PHY_ID1: [bit15-0:ID(21-6)]
113 * PHY_ID2: [bit15-10:ID(5-0)][bit9-4:Model][bit3-0:revision]
115 phy->id = (u32)phy_id1;
116 phy->id = ((phy->id << 6) | ((phy_id2 & 0xFC00) >> 10));
117 phy->revision = (u32) (phy_id2 & 0x000F);
118 pr_debug("phy->id : 0x%08x phy->revision : 0x%08x\n",
119 phy->id, phy->revision);
120 return 0;
124 * pch_gbe_phy_read_reg_miic - Read MII control register
125 * @hw: Pointer to the HW structure
126 * @offset: Register offset to be read
127 * @data: Pointer to the read data
128 * Returns
129 * 0: Successful.
130 * -EINVAL: Invalid argument.
132 s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data)
134 struct pch_gbe_phy_info *phy = &hw->phy;
136 if (offset > PHY_MAX_REG_ADDRESS) {
137 pr_err("PHY Address %d is out of range\n", offset);
138 return -EINVAL;
140 *data = pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_READ,
141 offset, (u16)0);
142 return 0;
146 * pch_gbe_phy_write_reg_miic - Write MII control register
147 * @hw: Pointer to the HW structure
148 * @offset: Register offset to be read
149 * @data: data to write to register at offset
150 * Returns
151 * 0: Successful.
152 * -EINVAL: Invalid argument.
154 s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
156 struct pch_gbe_phy_info *phy = &hw->phy;
158 if (offset > PHY_MAX_REG_ADDRESS) {
159 pr_err("PHY Address %d is out of range\n", offset);
160 return -EINVAL;
162 pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_WRITE,
163 offset, data);
164 return 0;
168 * pch_gbe_phy_sw_reset - PHY software reset
169 * @hw: Pointer to the HW structure
171 void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
173 u16 phy_ctrl;
175 pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &phy_ctrl);
176 phy_ctrl |= MII_CR_RESET;
177 pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, phy_ctrl);
178 udelay(1);
182 * pch_gbe_phy_hw_reset - PHY hardware reset
183 * @hw: Pointer to the HW structure
185 void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw)
187 pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, PHY_CONTROL_DEFAULT);
188 pch_gbe_phy_write_reg_miic(hw, PHY_AUTONEG_ADV,
189 PHY_AUTONEG_ADV_DEFAULT);
190 pch_gbe_phy_write_reg_miic(hw, PHY_NEXT_PAGE_TX,
191 PHY_NEXT_PAGE_TX_DEFAULT);
192 pch_gbe_phy_write_reg_miic(hw, PHY_1000T_CTRL, PHY_1000T_CTRL_DEFAULT);
193 pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL,
194 PHY_PHYSP_CONTROL_DEFAULT);
198 * pch_gbe_phy_power_up - restore link in case the phy was powered down
199 * @hw: Pointer to the HW structure
201 void pch_gbe_phy_power_up(struct pch_gbe_hw *hw)
203 u16 mii_reg;
205 mii_reg = 0;
206 /* Just clear the power down bit to wake the phy back up */
207 /* according to the manual, the phy will retain its
208 * settings across a power-down/up cycle */
209 pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
210 mii_reg &= ~MII_CR_POWER_DOWN;
211 pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
215 * pch_gbe_phy_power_down - Power down PHY
216 * @hw: Pointer to the HW structure
218 void pch_gbe_phy_power_down(struct pch_gbe_hw *hw)
220 u16 mii_reg;
222 mii_reg = 0;
223 /* Power down the PHY so no link is implied when interface is down *
224 * The PHY cannot be powered down if any of the following is TRUE *
225 * (a) WoL is enabled
226 * (b) AMT is active
228 pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
229 mii_reg |= MII_CR_POWER_DOWN;
230 pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
231 mdelay(1);
235 * pch_gbe_phy_set_rgmii - RGMII interface setting
236 * @hw: Pointer to the HW structure
238 inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
240 pch_gbe_phy_sw_reset(hw);
244 * pch_gbe_phy_init_setting - PHY initial setting
245 * @hw: Pointer to the HW structure
247 void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
249 struct pch_gbe_adapter *adapter;
250 struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
251 int ret;
252 u16 mii_reg;
254 adapter = container_of(hw, struct pch_gbe_adapter, hw);
255 ret = mii_ethtool_gset(&adapter->mii, &cmd);
256 if (ret)
257 pr_err("Error: mii_ethtool_gset\n");
259 ethtool_cmd_speed_set(&cmd, hw->mac.link_speed);
260 cmd.duplex = hw->mac.link_duplex;
261 cmd.advertising = hw->phy.autoneg_advertised;
262 cmd.autoneg = hw->mac.autoneg;
263 pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
264 ret = mii_ethtool_sset(&adapter->mii, &cmd);
265 if (ret)
266 pr_err("Error: mii_ethtool_sset\n");
268 pch_gbe_phy_sw_reset(hw);
270 pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
271 mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
272 pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);