1 /* ----------------------------------------------------------------------------
2 Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
3 nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
5 The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
6 Access Controller for Ethernet (MACE). It is essentially the Am2150
7 PCMCIA Ethernet card contained in the Am2150 Demo Kit.
9 Written by Roger C. Pao <rpao@paonet.org>
10 Copyright 1995 Roger C. Pao
11 Linux 2.5 cleanups Copyright Red Hat 2003
13 This software may be used and distributed according to the terms of
14 the GNU General Public License.
16 Ported to Linux 1.3.* network driver environment by
17 Matti Aarnio <mea@utu.fi>
21 Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
22 Am79C940 (MACE) Data Sheet, 1994
23 Am79C90 (C-LANCE) Data Sheet, 1994
24 Linux PCMCIA Programmer's Guide v1.17
25 /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
27 Eric Mears, New Media Corporation
28 Tom Pollard, New Media Corporation
29 Dean Siasoyco, New Media Corporation
30 Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
31 Donald Becker <becker@scyld.com>
32 David Hinds <dahinds@users.sourceforge.net>
34 The Linux client driver is based on the 3c589_cs.c client driver by
37 The Linux network driver outline is based on the 3c589_cs.c driver,
38 the 8390.c driver, and the example skeleton.c kernel code, which are
41 The Am2150 network driver hardware interface code is based on the
42 OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
44 Special thanks for testing and help in debugging this driver goes
47 -------------------------------------------------------------------------------
48 Driver Notes and Issues
49 -------------------------------------------------------------------------------
51 1. Developed on a Dell 320SLi
52 PCMCIA Card Services 2.6.2
53 Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
55 2. rc.pcmcia may require loading pcmcia_core with io_speed=300:
56 'insmod pcmcia_core.o io_speed=300'.
57 This will avoid problems with fast systems which causes rx_framecnt
58 to return random values.
60 3. If hot extraction does not work for you, use 'ifconfig eth0 down'
63 4. There is a bad slow-down problem in this driver.
65 5. Future: Multicast processing. In the meantime, do _not_ compile your
66 kernel with multicast ip enabled.
68 -------------------------------------------------------------------------------
70 -------------------------------------------------------------------------------
72 * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk>
73 * Fixed hang on card eject as we probe it
74 * Cleaned up to use new style locking.
76 * Revision 0.16 1995/07/01 06:42:17 rpao
77 * Bug fix: nmclan_reset() called CardServices incorrectly.
79 * Revision 0.15 1995/05/24 08:09:47 rpao
80 * Re-implement MULTI_TX dev->tbusy handling.
82 * Revision 0.14 1995/05/23 03:19:30 rpao
83 * Added, in nmclan_config(), "tuple.Attributes = 0;".
84 * Modified MACE ID check to ignore chip revision level.
85 * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
87 * Revision 0.13 1995/05/18 05:56:34 rpao
89 * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
90 * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT. Fixes driver lockup.
92 * Revision 0.12 1995/05/14 00:12:23 rpao
93 * Statistics overhaul.
97 Bug fix: MACE statistics counters used wrong I/O ports.
98 Bug fix: mace_interrupt() needed to allow statistics to be
99 processed without RX or TX interrupts pending.
101 Multiple transmit request processing.
102 Modified statistics to use MACE counters where possible.
103 95/05/10 rpao V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
106 Bug fix: Make all non-exported functions private by using
108 Bug fix: Test IntrCnt _before_ reading MACE_IR.
109 95/05/10 rpao V0.07 Statistics.
110 95/05/09 rpao V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
112 ---------------------------------------------------------------------------- */
114 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
116 #define DRV_NAME "nmclan_cs"
117 #define DRV_VERSION "0.16"
120 /* ----------------------------------------------------------------------------
121 Conditional Compilation Options
122 ---------------------------------------------------------------------------- */
125 #define RESET_ON_TIMEOUT 1
126 #define TX_INTERRUPTABLE 1
127 #define RESET_XILINX 0
129 /* ----------------------------------------------------------------------------
131 ---------------------------------------------------------------------------- */
133 #include <linux/module.h>
134 #include <linux/kernel.h>
135 #include <linux/init.h>
136 #include <linux/ptrace.h>
137 #include <linux/slab.h>
138 #include <linux/string.h>
139 #include <linux/timer.h>
140 #include <linux/interrupt.h>
141 #include <linux/in.h>
142 #include <linux/delay.h>
143 #include <linux/ethtool.h>
144 #include <linux/netdevice.h>
145 #include <linux/etherdevice.h>
146 #include <linux/skbuff.h>
147 #include <linux/if_arp.h>
148 #include <linux/ioport.h>
149 #include <linux/bitops.h>
151 #include <pcmcia/cisreg.h>
152 #include <pcmcia/cistpl.h>
153 #include <pcmcia/ds.h>
155 #include <asm/uaccess.h>
157 #include <asm/system.h>
159 /* ----------------------------------------------------------------------------
161 ---------------------------------------------------------------------------- */
163 #define ETHER_ADDR_LEN ETH_ALEN
164 /* 6 bytes in an Ethernet Address */
165 #define MACE_LADRF_LEN 8
166 /* 8 bytes in Logical Address Filter */
168 /* Loop Control Defines */
169 #define MACE_MAX_IR_ITERATIONS 10
170 #define MACE_MAX_RX_ITERATIONS 12
172 TBD: Dean brought this up, and I assumed the hardware would
175 If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
176 non-zero when the isr exits. We may not get another interrupt
177 to process the remaining packets for some time.
181 The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
182 which manages the interface between the MACE and the PCMCIA bus. It
183 also includes buffer management for the 32K x 8 SRAM to control up to
184 four transmit and 12 receive frames at a time.
186 #define AM2150_MAX_TX_FRAMES 4
187 #define AM2150_MAX_RX_FRAMES 12
189 /* Am2150 Ethernet Card I/O Mapping */
190 #define AM2150_RCV 0x00
191 #define AM2150_XMT 0x04
192 #define AM2150_XMT_SKIP 0x09
193 #define AM2150_RCV_NEXT 0x0A
194 #define AM2150_RCV_FRAME_COUNT 0x0B
195 #define AM2150_MACE_BANK 0x0C
196 #define AM2150_MACE_BASE 0x10
199 #define MACE_RCVFIFO 0
200 #define MACE_XMTFIFO 1
206 #define MACE_FIFOFC 7
210 #define MACE_BIUCC 11
211 #define MACE_FIFOCC 12
212 #define MACE_MACCC 13
213 #define MACE_PLSCC 14
214 #define MACE_PHYCC 15
215 #define MACE_CHIPIDL 16
216 #define MACE_CHIPIDH 17
219 #define MACE_LADRF 20
225 #define MACE_RNTPC 26
226 #define MACE_RCVCC 27
233 #define MACE_XMTRC_EXDEF 0x80
234 #define MACE_XMTRC_XMTRC 0x0F
236 #define MACE_XMTFS_XMTSV 0x80
237 #define MACE_XMTFS_UFLO 0x40
238 #define MACE_XMTFS_LCOL 0x20
239 #define MACE_XMTFS_MORE 0x10
240 #define MACE_XMTFS_ONE 0x08
241 #define MACE_XMTFS_DEFER 0x04
242 #define MACE_XMTFS_LCAR 0x02
243 #define MACE_XMTFS_RTRY 0x01
245 #define MACE_RCVFS_RCVSTS 0xF000
246 #define MACE_RCVFS_OFLO 0x8000
247 #define MACE_RCVFS_CLSN 0x4000
248 #define MACE_RCVFS_FRAM 0x2000
249 #define MACE_RCVFS_FCS 0x1000
251 #define MACE_FIFOFC_RCVFC 0xF0
252 #define MACE_FIFOFC_XMTFC 0x0F
254 #define MACE_IR_JAB 0x80
255 #define MACE_IR_BABL 0x40
256 #define MACE_IR_CERR 0x20
257 #define MACE_IR_RCVCCO 0x10
258 #define MACE_IR_RNTPCO 0x08
259 #define MACE_IR_MPCO 0x04
260 #define MACE_IR_RCVINT 0x02
261 #define MACE_IR_XMTINT 0x01
263 #define MACE_MACCC_PROM 0x80
264 #define MACE_MACCC_DXMT2PD 0x40
265 #define MACE_MACCC_EMBA 0x20
266 #define MACE_MACCC_RESERVED 0x10
267 #define MACE_MACCC_DRCVPA 0x08
268 #define MACE_MACCC_DRCVBC 0x04
269 #define MACE_MACCC_ENXMT 0x02
270 #define MACE_MACCC_ENRCV 0x01
272 #define MACE_PHYCC_LNKFL 0x80
273 #define MACE_PHYCC_DLNKTST 0x40
274 #define MACE_PHYCC_REVPOL 0x20
275 #define MACE_PHYCC_DAPC 0x10
276 #define MACE_PHYCC_LRT 0x08
277 #define MACE_PHYCC_ASEL 0x04
278 #define MACE_PHYCC_RWAKE 0x02
279 #define MACE_PHYCC_AWAKE 0x01
281 #define MACE_IAC_ADDRCHG 0x80
282 #define MACE_IAC_PHYADDR 0x04
283 #define MACE_IAC_LOGADDR 0x02
285 #define MACE_UTR_RTRE 0x80
286 #define MACE_UTR_RTRD 0x40
287 #define MACE_UTR_RPA 0x20
288 #define MACE_UTR_FCOLL 0x10
289 #define MACE_UTR_RCVFCSE 0x08
290 #define MACE_UTR_LOOP_INCL_MENDEC 0x06
291 #define MACE_UTR_LOOP_NO_MENDEC 0x04
292 #define MACE_UTR_LOOP_EXTERNAL 0x02
293 #define MACE_UTR_LOOP_NONE 0x00
294 #define MACE_UTR_RESERVED 0x01
296 /* Switch MACE register bank (only 0 and 1 are valid) */
297 #define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
299 #define MACE_IMR_DEFAULT \
310 #undef MACE_IMR_DEFAULT
311 #define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
313 #define TX_TIMEOUT ((400*HZ)/1000)
315 /* ----------------------------------------------------------------------------
317 ---------------------------------------------------------------------------- */
319 typedef struct _mace_statistics
{
334 /* RFS1--Receive Status (RCVSTS) */
340 /* RFS2--Runt Packet Count (RNTPC) */
343 /* RFS3--Receive Collision Count (RCVCC) */
364 typedef struct _mace_private
{
365 struct pcmcia_device
*p_dev
;
366 struct net_device_stats linux_stats
; /* Linux statistics counters */
367 mace_statistics mace_stats
; /* MACE chip statistics counters */
369 /* restore_multicast_list() state variables */
370 int multicast_ladrf
[MACE_LADRF_LEN
]; /* Logical address filter */
371 int multicast_num_addrs
;
373 char tx_free_frames
; /* Number of free transmit frame buffers */
374 char tx_irq_disabled
; /* MACE TX interrupt disabled */
376 spinlock_t bank_lock
; /* Must be held if you step off bank 0 */
379 /* ----------------------------------------------------------------------------
380 Private Global Variables
381 ---------------------------------------------------------------------------- */
383 static const char *if_names
[]={
384 "Auto", "10baseT", "BNC",
387 /* ----------------------------------------------------------------------------
389 These are the parameters that can be set during loading with
391 ---------------------------------------------------------------------------- */
393 MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
394 MODULE_LICENSE("GPL");
396 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
398 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
399 INT_MODULE_PARM(if_port
, 0);
402 /* ----------------------------------------------------------------------------
404 ---------------------------------------------------------------------------- */
406 static int nmclan_config(struct pcmcia_device
*link
);
407 static void nmclan_release(struct pcmcia_device
*link
);
409 static void nmclan_reset(struct net_device
*dev
);
410 static int mace_config(struct net_device
*dev
, struct ifmap
*map
);
411 static int mace_open(struct net_device
*dev
);
412 static int mace_close(struct net_device
*dev
);
413 static netdev_tx_t
mace_start_xmit(struct sk_buff
*skb
,
414 struct net_device
*dev
);
415 static void mace_tx_timeout(struct net_device
*dev
);
416 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
);
417 static struct net_device_stats
*mace_get_stats(struct net_device
*dev
);
418 static int mace_rx(struct net_device
*dev
, unsigned char RxCnt
);
419 static void restore_multicast_list(struct net_device
*dev
);
420 static void set_multicast_list(struct net_device
*dev
);
421 static const struct ethtool_ops netdev_ethtool_ops
;
424 static void nmclan_detach(struct pcmcia_device
*p_dev
);
426 static const struct net_device_ops mace_netdev_ops
= {
427 .ndo_open
= mace_open
,
428 .ndo_stop
= mace_close
,
429 .ndo_start_xmit
= mace_start_xmit
,
430 .ndo_tx_timeout
= mace_tx_timeout
,
431 .ndo_set_config
= mace_config
,
432 .ndo_get_stats
= mace_get_stats
,
433 .ndo_set_multicast_list
= set_multicast_list
,
434 .ndo_change_mtu
= eth_change_mtu
,
435 .ndo_set_mac_address
= eth_mac_addr
,
436 .ndo_validate_addr
= eth_validate_addr
,
439 static int nmclan_probe(struct pcmcia_device
*link
)
442 struct net_device
*dev
;
444 dev_dbg(&link
->dev
, "nmclan_attach()\n");
446 /* Create new ethernet device */
447 dev
= alloc_etherdev(sizeof(mace_private
));
450 lp
= netdev_priv(dev
);
454 spin_lock_init(&lp
->bank_lock
);
455 link
->resource
[0]->end
= 32;
456 link
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_AUTO
;
457 link
->config_flags
|= CONF_ENABLE_IRQ
;
458 link
->config_index
= 1;
459 link
->config_regs
= PRESENT_OPTION
;
461 lp
->tx_free_frames
=AM2150_MAX_TX_FRAMES
;
463 dev
->netdev_ops
= &mace_netdev_ops
;
464 SET_ETHTOOL_OPS(dev
, &netdev_ethtool_ops
);
465 dev
->watchdog_timeo
= TX_TIMEOUT
;
467 return nmclan_config(link
);
468 } /* nmclan_attach */
470 static void nmclan_detach(struct pcmcia_device
*link
)
472 struct net_device
*dev
= link
->priv
;
474 dev_dbg(&link
->dev
, "nmclan_detach\n");
476 unregister_netdev(dev
);
478 nmclan_release(link
);
481 } /* nmclan_detach */
483 /* ----------------------------------------------------------------------------
485 Reads a MACE register. This is bank independent; however, the
486 caller must ensure that this call is not interruptable. We are
487 assuming that during normal operation, the MACE is always in
489 ---------------------------------------------------------------------------- */
490 static int mace_read(mace_private
*lp
, unsigned int ioaddr
, int reg
)
496 case 0: /* register 0-15 */
497 data
= inb(ioaddr
+ AM2150_MACE_BASE
+ reg
);
499 case 1: /* register 16-31 */
500 spin_lock_irqsave(&lp
->bank_lock
, flags
);
502 data
= inb(ioaddr
+ AM2150_MACE_BASE
+ (reg
& 0x0F));
504 spin_unlock_irqrestore(&lp
->bank_lock
, flags
);
510 /* ----------------------------------------------------------------------------
512 Writes to a MACE register. This is bank independent; however,
513 the caller must ensure that this call is not interruptable. We
514 are assuming that during normal operation, the MACE is always in
516 ---------------------------------------------------------------------------- */
517 static void mace_write(mace_private
*lp
, unsigned int ioaddr
, int reg
,
523 case 0: /* register 0-15 */
524 outb(data
& 0xFF, ioaddr
+ AM2150_MACE_BASE
+ reg
);
526 case 1: /* register 16-31 */
527 spin_lock_irqsave(&lp
->bank_lock
, flags
);
529 outb(data
& 0xFF, ioaddr
+ AM2150_MACE_BASE
+ (reg
& 0x0F));
531 spin_unlock_irqrestore(&lp
->bank_lock
, flags
);
536 /* ----------------------------------------------------------------------------
538 Resets the MACE chip.
539 ---------------------------------------------------------------------------- */
540 static int mace_init(mace_private
*lp
, unsigned int ioaddr
, char *enet_addr
)
545 /* MACE Software reset */
546 mace_write(lp
, ioaddr
, MACE_BIUCC
, 1);
547 while (mace_read(lp
, ioaddr
, MACE_BIUCC
) & 0x01) {
548 /* Wait for reset bit to be cleared automatically after <= 200ns */;
551 pr_err("reset failed, card removed?\n");
556 mace_write(lp
, ioaddr
, MACE_BIUCC
, 0);
558 /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
559 mace_write(lp
, ioaddr
, MACE_FIFOCC
, 0x0F);
561 mace_write(lp
,ioaddr
, MACE_RCVFC
, 0); /* Disable Auto Strip Receive */
562 mace_write(lp
, ioaddr
, MACE_IMR
, 0xFF); /* Disable all interrupts until _open */
565 * Bit 2-1 PORTSEL[1-0] Port Select.
568 * 10 DAI Port (reserved in Am2150)
570 * For this card, only the first two are valid.
571 * So, PLSCC should be set to
574 * Or just set ASEL in PHYCC below!
578 mace_write(lp
, ioaddr
, MACE_PLSCC
, 0x02);
581 mace_write(lp
, ioaddr
, MACE_PLSCC
, 0x00);
584 mace_write(lp
, ioaddr
, MACE_PHYCC
, /* ASEL */ 4);
585 /* ASEL Auto Select. When set, the PORTSEL[1-0] bits are overridden,
586 and the MACE device will automatically select the operating media
591 mace_write(lp
, ioaddr
, MACE_IAC
, MACE_IAC_ADDRCHG
| MACE_IAC_PHYADDR
);
592 /* Poll ADDRCHG bit */
594 while (mace_read(lp
, ioaddr
, MACE_IAC
) & MACE_IAC_ADDRCHG
)
598 pr_err("ADDRCHG timeout, card removed?\n");
602 /* Set PADR register */
603 for (i
= 0; i
< ETHER_ADDR_LEN
; i
++)
604 mace_write(lp
, ioaddr
, MACE_PADR
, enet_addr
[i
]);
606 /* MAC Configuration Control Register should be written last */
607 /* Let set_multicast_list set this. */
608 /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
609 mace_write(lp
, ioaddr
, MACE_MACCC
, 0x00);
613 static int nmclan_config(struct pcmcia_device
*link
)
615 struct net_device
*dev
= link
->priv
;
616 mace_private
*lp
= netdev_priv(dev
);
622 dev_dbg(&link
->dev
, "nmclan_config\n");
625 ret
= pcmcia_request_io(link
);
628 ret
= pcmcia_request_exclusive_irq(link
, mace_interrupt
);
631 ret
= pcmcia_enable_device(link
);
635 dev
->irq
= link
->irq
;
636 dev
->base_addr
= link
->resource
[0]->start
;
638 ioaddr
= dev
->base_addr
;
640 /* Read the ethernet address from the CIS. */
641 len
= pcmcia_get_tuple(link
, 0x80, &buf
);
642 if (!buf
|| len
< ETHER_ADDR_LEN
) {
646 memcpy(dev
->dev_addr
, buf
, ETHER_ADDR_LEN
);
649 /* Verify configuration by reading the MACE ID. */
653 sig
[0] = mace_read(lp
, ioaddr
, MACE_CHIPIDL
);
654 sig
[1] = mace_read(lp
, ioaddr
, MACE_CHIPIDH
);
655 if ((sig
[0] == 0x40) && ((sig
[1] & 0x0F) == 0x09)) {
656 dev_dbg(&link
->dev
, "nmclan_cs configured: mace id=%x %x\n",
659 pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
665 if(mace_init(lp
, ioaddr
, dev
->dev_addr
) == -1)
668 /* The if_port symbol can be set when the module is loaded */
670 dev
->if_port
= if_port
;
672 pr_notice("invalid if_port requested\n");
674 SET_NETDEV_DEV(dev
, &link
->dev
);
676 i
= register_netdev(dev
);
678 pr_notice("register_netdev() failed\n");
682 netdev_info(dev
, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n",
683 dev
->base_addr
, dev
->irq
, if_names
[dev
->if_port
], dev
->dev_addr
);
687 nmclan_release(link
);
689 } /* nmclan_config */
691 static void nmclan_release(struct pcmcia_device
*link
)
693 dev_dbg(&link
->dev
, "nmclan_release\n");
694 pcmcia_disable_device(link
);
697 static int nmclan_suspend(struct pcmcia_device
*link
)
699 struct net_device
*dev
= link
->priv
;
702 netif_device_detach(dev
);
707 static int nmclan_resume(struct pcmcia_device
*link
)
709 struct net_device
*dev
= link
->priv
;
713 netif_device_attach(dev
);
720 /* ----------------------------------------------------------------------------
722 Reset and restore all of the Xilinx and MACE registers.
723 ---------------------------------------------------------------------------- */
724 static void nmclan_reset(struct net_device
*dev
)
726 mace_private
*lp
= netdev_priv(dev
);
729 struct pcmcia_device
*link
= &lp
->link
;
732 /* Save original COR value */
733 pcmcia_read_config_byte(link
, CISREG_COR
, &OrigCorValue
);
736 dev_dbg(&link
->dev
, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
738 pcmcia_write_config_byte(link
, CISREG_COR
, COR_SOFT_RESET
);
739 /* Need to wait for 20 ms for PCMCIA to finish reset. */
741 /* Restore original COR configuration index */
742 pcmcia_write_config_byte(link
, CISREG_COR
,
743 (COR_LEVEL_REQ
| (OrigCorValue
& COR_CONFIG_MASK
)));
744 /* Xilinx is now completely reset along with the MACE chip. */
745 lp
->tx_free_frames
=AM2150_MAX_TX_FRAMES
;
747 #endif /* #if RESET_XILINX */
749 /* Xilinx is now completely reset along with the MACE chip. */
750 lp
->tx_free_frames
=AM2150_MAX_TX_FRAMES
;
752 /* Reinitialize the MACE chip for operation. */
753 mace_init(lp
, dev
->base_addr
, dev
->dev_addr
);
754 mace_write(lp
, dev
->base_addr
, MACE_IMR
, MACE_IMR_DEFAULT
);
756 /* Restore the multicast list and enable TX and RX. */
757 restore_multicast_list(dev
);
760 /* ----------------------------------------------------------------------------
762 [Someone tell me what this is supposed to do? Is if_port a defined
763 standard? If so, there should be defines to indicate 1=10Base-T,
764 2=10Base-2, etc. including limited automatic detection.]
765 ---------------------------------------------------------------------------- */
766 static int mace_config(struct net_device
*dev
, struct ifmap
*map
)
768 if ((map
->port
!= (u_char
)(-1)) && (map
->port
!= dev
->if_port
)) {
769 if (map
->port
<= 2) {
770 dev
->if_port
= map
->port
;
771 netdev_info(dev
, "switched to %s port\n", if_names
[dev
->if_port
]);
778 /* ----------------------------------------------------------------------------
781 ---------------------------------------------------------------------------- */
782 static int mace_open(struct net_device
*dev
)
784 unsigned int ioaddr
= dev
->base_addr
;
785 mace_private
*lp
= netdev_priv(dev
);
786 struct pcmcia_device
*link
= lp
->p_dev
;
788 if (!pcmcia_dev_present(link
))
795 netif_start_queue(dev
);
798 return 0; /* Always succeed */
801 /* ----------------------------------------------------------------------------
803 Closes device driver.
804 ---------------------------------------------------------------------------- */
805 static int mace_close(struct net_device
*dev
)
807 unsigned int ioaddr
= dev
->base_addr
;
808 mace_private
*lp
= netdev_priv(dev
);
809 struct pcmcia_device
*link
= lp
->p_dev
;
811 dev_dbg(&link
->dev
, "%s: shutting down ethercard.\n", dev
->name
);
813 /* Mask off all interrupts from the MACE chip. */
814 outb(0xFF, ioaddr
+ AM2150_MACE_BASE
+ MACE_IMR
);
817 netif_stop_queue(dev
);
822 static void netdev_get_drvinfo(struct net_device
*dev
,
823 struct ethtool_drvinfo
*info
)
825 strcpy(info
->driver
, DRV_NAME
);
826 strcpy(info
->version
, DRV_VERSION
);
827 sprintf(info
->bus_info
, "PCMCIA 0x%lx", dev
->base_addr
);
830 static const struct ethtool_ops netdev_ethtool_ops
= {
831 .get_drvinfo
= netdev_get_drvinfo
,
834 /* ----------------------------------------------------------------------------
836 This routine begins the packet transmit function. When completed,
837 it will generate a transmit interrupt.
839 According to /usr/src/linux/net/inet/dev.c, if _start_xmit
840 returns 0, the "packet is now solely the responsibility of the
841 driver." If _start_xmit returns non-zero, the "transmission
842 failed, put skb back into a list."
843 ---------------------------------------------------------------------------- */
845 static void mace_tx_timeout(struct net_device
*dev
)
847 mace_private
*lp
= netdev_priv(dev
);
848 struct pcmcia_device
*link
= lp
->p_dev
;
850 netdev_notice(dev
, "transmit timed out -- ");
852 pr_cont("resetting card\n");
853 pcmcia_reset_card(link
->socket
);
854 #else /* #if RESET_ON_TIMEOUT */
855 pr_cont("NOT resetting card\n");
856 #endif /* #if RESET_ON_TIMEOUT */
857 dev
->trans_start
= jiffies
; /* prevent tx timeout */
858 netif_wake_queue(dev
);
861 static netdev_tx_t
mace_start_xmit(struct sk_buff
*skb
,
862 struct net_device
*dev
)
864 mace_private
*lp
= netdev_priv(dev
);
865 unsigned int ioaddr
= dev
->base_addr
;
867 netif_stop_queue(dev
);
869 pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
870 dev
->name
, (long)skb
->len
);
872 #if (!TX_INTERRUPTABLE)
873 /* Disable MACE TX interrupts. */
874 outb(MACE_IMR_DEFAULT
| MACE_IR_XMTINT
,
875 ioaddr
+ AM2150_MACE_BASE
+ MACE_IMR
);
876 lp
->tx_irq_disabled
=1;
877 #endif /* #if (!TX_INTERRUPTABLE) */
880 /* This block must not be interrupted by another transmit request!
881 mace_tx_timeout will take care of timer-based retransmissions from
882 the upper layers. The interrupt handler is guaranteed never to
883 service a transmit interrupt while we are in here.
886 lp
->linux_stats
.tx_bytes
+= skb
->len
;
887 lp
->tx_free_frames
--;
889 /* WARNING: Write the _exact_ number of bytes written in the header! */
890 /* Put out the word header [must be an outw()] . . . */
891 outw(skb
->len
, ioaddr
+ AM2150_XMT
);
892 /* . . . and the packet [may be any combination of outw() and outb()] */
893 outsw(ioaddr
+ AM2150_XMT
, skb
->data
, skb
->len
>> 1);
895 /* Odd byte transfer */
896 outb(skb
->data
[skb
->len
-1], ioaddr
+ AM2150_XMT
);
900 if (lp
->tx_free_frames
> 0)
901 netif_start_queue(dev
);
902 #endif /* #if MULTI_TX */
905 #if (!TX_INTERRUPTABLE)
906 /* Re-enable MACE TX interrupts. */
907 lp
->tx_irq_disabled
=0;
908 outb(MACE_IMR_DEFAULT
, ioaddr
+ AM2150_MACE_BASE
+ MACE_IMR
);
909 #endif /* #if (!TX_INTERRUPTABLE) */
914 } /* mace_start_xmit */
916 /* ----------------------------------------------------------------------------
918 The interrupt handler.
919 ---------------------------------------------------------------------------- */
920 static irqreturn_t
mace_interrupt(int irq
, void *dev_id
)
922 struct net_device
*dev
= (struct net_device
*) dev_id
;
923 mace_private
*lp
= netdev_priv(dev
);
926 int IntrCnt
= MACE_MAX_IR_ITERATIONS
;
929 pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
934 ioaddr
= dev
->base_addr
;
936 if (lp
->tx_irq_disabled
) {
938 if (lp
->tx_irq_disabled
)
939 msg
= "Interrupt with tx_irq_disabled";
941 msg
= "Re-entering the interrupt handler";
942 netdev_notice(dev
, "%s [isr=%02X, imr=%02X]\n",
944 inb(ioaddr
+ AM2150_MACE_BASE
+ MACE_IR
),
945 inb(ioaddr
+ AM2150_MACE_BASE
+ MACE_IMR
));
946 /* WARNING: MACE_IR has been read! */
950 if (!netif_device_present(dev
)) {
951 netdev_dbg(dev
, "interrupt from dead card\n");
956 /* WARNING: MACE_IR is a READ/CLEAR port! */
957 status
= inb(ioaddr
+ AM2150_MACE_BASE
+ MACE_IR
);
959 pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq
, status
);
961 if (status
& MACE_IR_RCVINT
) {
962 mace_rx(dev
, MACE_MAX_RX_ITERATIONS
);
965 if (status
& MACE_IR_XMTINT
) {
966 unsigned char fifofc
;
970 fifofc
= inb(ioaddr
+ AM2150_MACE_BASE
+ MACE_FIFOFC
);
971 if ((fifofc
& MACE_FIFOFC_XMTFC
)==0) {
972 lp
->linux_stats
.tx_errors
++;
973 outb(0xFF, ioaddr
+ AM2150_XMT_SKIP
);
976 /* Transmit Retry Count (XMTRC, reg 4) */
977 xmtrc
= inb(ioaddr
+ AM2150_MACE_BASE
+ MACE_XMTRC
);
978 if (xmtrc
& MACE_XMTRC_EXDEF
) lp
->mace_stats
.exdef
++;
979 lp
->mace_stats
.xmtrc
+= (xmtrc
& MACE_XMTRC_XMTRC
);
982 (xmtfs
= inb(ioaddr
+ AM2150_MACE_BASE
+ MACE_XMTFS
)) &
983 MACE_XMTFS_XMTSV
/* Transmit Status Valid */
985 lp
->mace_stats
.xmtsv
++;
987 if (xmtfs
& ~MACE_XMTFS_XMTSV
) {
988 if (xmtfs
& MACE_XMTFS_UFLO
) {
989 /* Underflow. Indicates that the Transmit FIFO emptied before
990 the end of frame was reached. */
991 lp
->mace_stats
.uflo
++;
993 if (xmtfs
& MACE_XMTFS_LCOL
) {
995 lp
->mace_stats
.lcol
++;
997 if (xmtfs
& MACE_XMTFS_MORE
) {
998 /* MORE than one retry was needed */
999 lp
->mace_stats
.more
++;
1001 if (xmtfs
& MACE_XMTFS_ONE
) {
1002 /* Exactly ONE retry occurred */
1003 lp
->mace_stats
.one
++;
1005 if (xmtfs
& MACE_XMTFS_DEFER
) {
1006 /* Transmission was defered */
1007 lp
->mace_stats
.defer
++;
1009 if (xmtfs
& MACE_XMTFS_LCAR
) {
1010 /* Loss of carrier */
1011 lp
->mace_stats
.lcar
++;
1013 if (xmtfs
& MACE_XMTFS_RTRY
) {
1014 /* Retry error: transmit aborted after 16 attempts */
1015 lp
->mace_stats
.rtry
++;
1017 } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
1019 } /* if (xmtfs & MACE_XMTFS_XMTSV) */
1021 lp
->linux_stats
.tx_packets
++;
1022 lp
->tx_free_frames
++;
1023 netif_wake_queue(dev
);
1024 } /* if (status & MACE_IR_XMTINT) */
1026 if (status
& ~MACE_IMR_DEFAULT
& ~MACE_IR_RCVINT
& ~MACE_IR_XMTINT
) {
1027 if (status
& MACE_IR_JAB
) {
1028 /* Jabber Error. Excessive transmit duration (20-150ms). */
1029 lp
->mace_stats
.jab
++;
1031 if (status
& MACE_IR_BABL
) {
1032 /* Babble Error. >1518 bytes transmitted. */
1033 lp
->mace_stats
.babl
++;
1035 if (status
& MACE_IR_CERR
) {
1036 /* Collision Error. CERR indicates the absence of the
1037 Signal Quality Error Test message after a packet
1039 lp
->mace_stats
.cerr
++;
1041 if (status
& MACE_IR_RCVCCO
) {
1042 /* Receive Collision Count Overflow; */
1043 lp
->mace_stats
.rcvcco
++;
1045 if (status
& MACE_IR_RNTPCO
) {
1046 /* Runt Packet Count Overflow */
1047 lp
->mace_stats
.rntpco
++;
1049 if (status
& MACE_IR_MPCO
) {
1050 /* Missed Packet Count Overflow */
1051 lp
->mace_stats
.mpco
++;
1053 } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
1055 } while ((status
& ~MACE_IMR_DEFAULT
) && (--IntrCnt
));
1058 } /* mace_interrupt */
1060 /* ----------------------------------------------------------------------------
1063 ---------------------------------------------------------------------------- */
1064 static int mace_rx(struct net_device
*dev
, unsigned char RxCnt
)
1066 mace_private
*lp
= netdev_priv(dev
);
1067 unsigned int ioaddr
= dev
->base_addr
;
1068 unsigned char rx_framecnt
;
1069 unsigned short rx_status
;
1072 ((rx_framecnt
= inb(ioaddr
+ AM2150_RCV_FRAME_COUNT
)) > 0) &&
1073 (rx_framecnt
<= 12) && /* rx_framecnt==0xFF if card is extracted. */
1076 rx_status
= inw(ioaddr
+ AM2150_RCV
);
1078 pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
1079 " 0x%X.\n", dev
->name
, rx_framecnt
, rx_status
);
1081 if (rx_status
& MACE_RCVFS_RCVSTS
) { /* Error, update stats. */
1082 lp
->linux_stats
.rx_errors
++;
1083 if (rx_status
& MACE_RCVFS_OFLO
) {
1084 lp
->mace_stats
.oflo
++;
1086 if (rx_status
& MACE_RCVFS_CLSN
) {
1087 lp
->mace_stats
.clsn
++;
1089 if (rx_status
& MACE_RCVFS_FRAM
) {
1090 lp
->mace_stats
.fram
++;
1092 if (rx_status
& MACE_RCVFS_FCS
) {
1093 lp
->mace_stats
.fcs
++;
1096 short pkt_len
= (rx_status
& ~MACE_RCVFS_RCVSTS
) - 4;
1097 /* Auto Strip is off, always subtract 4 */
1098 struct sk_buff
*skb
;
1100 lp
->mace_stats
.rfs_rntpc
+= inb(ioaddr
+ AM2150_RCV
);
1101 /* runt packet count */
1102 lp
->mace_stats
.rfs_rcvcc
+= inb(ioaddr
+ AM2150_RCV
);
1103 /* rcv collision count */
1105 pr_debug(" receiving packet size 0x%X rx_status"
1106 " 0x%X.\n", pkt_len
, rx_status
);
1108 skb
= dev_alloc_skb(pkt_len
+2);
1111 skb_reserve(skb
, 2);
1112 insw(ioaddr
+ AM2150_RCV
, skb_put(skb
, pkt_len
), pkt_len
>>1);
1114 *(skb_tail_pointer(skb
) - 1) = inb(ioaddr
+ AM2150_RCV
);
1115 skb
->protocol
= eth_type_trans(skb
, dev
);
1117 netif_rx(skb
); /* Send the packet to the upper (protocol) layers. */
1119 lp
->linux_stats
.rx_packets
++;
1120 lp
->linux_stats
.rx_bytes
+= pkt_len
;
1121 outb(0xFF, ioaddr
+ AM2150_RCV_NEXT
); /* skip to next frame */
1124 pr_debug("%s: couldn't allocate a sk_buff of size"
1125 " %d.\n", dev
->name
, pkt_len
);
1126 lp
->linux_stats
.rx_dropped
++;
1129 outb(0xFF, ioaddr
+ AM2150_RCV_NEXT
); /* skip to next frame */
1135 /* ----------------------------------------------------------------------------
1137 ---------------------------------------------------------------------------- */
1138 static void pr_linux_stats(struct net_device_stats
*pstats
)
1140 pr_debug("pr_linux_stats\n");
1141 pr_debug(" rx_packets=%-7ld tx_packets=%ld\n",
1142 (long)pstats
->rx_packets
, (long)pstats
->tx_packets
);
1143 pr_debug(" rx_errors=%-7ld tx_errors=%ld\n",
1144 (long)pstats
->rx_errors
, (long)pstats
->tx_errors
);
1145 pr_debug(" rx_dropped=%-7ld tx_dropped=%ld\n",
1146 (long)pstats
->rx_dropped
, (long)pstats
->tx_dropped
);
1147 pr_debug(" multicast=%-7ld collisions=%ld\n",
1148 (long)pstats
->multicast
, (long)pstats
->collisions
);
1150 pr_debug(" rx_length_errors=%-7ld rx_over_errors=%ld\n",
1151 (long)pstats
->rx_length_errors
, (long)pstats
->rx_over_errors
);
1152 pr_debug(" rx_crc_errors=%-7ld rx_frame_errors=%ld\n",
1153 (long)pstats
->rx_crc_errors
, (long)pstats
->rx_frame_errors
);
1154 pr_debug(" rx_fifo_errors=%-7ld rx_missed_errors=%ld\n",
1155 (long)pstats
->rx_fifo_errors
, (long)pstats
->rx_missed_errors
);
1157 pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
1158 (long)pstats
->tx_aborted_errors
, (long)pstats
->tx_carrier_errors
);
1159 pr_debug(" tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n",
1160 (long)pstats
->tx_fifo_errors
, (long)pstats
->tx_heartbeat_errors
);
1161 pr_debug(" tx_window_errors=%ld\n",
1162 (long)pstats
->tx_window_errors
);
1163 } /* pr_linux_stats */
1165 /* ----------------------------------------------------------------------------
1167 ---------------------------------------------------------------------------- */
1168 static void pr_mace_stats(mace_statistics
*pstats
)
1170 pr_debug("pr_mace_stats\n");
1172 pr_debug(" xmtsv=%-7d uflo=%d\n",
1173 pstats
->xmtsv
, pstats
->uflo
);
1174 pr_debug(" lcol=%-7d more=%d\n",
1175 pstats
->lcol
, pstats
->more
);
1176 pr_debug(" one=%-7d defer=%d\n",
1177 pstats
->one
, pstats
->defer
);
1178 pr_debug(" lcar=%-7d rtry=%d\n",
1179 pstats
->lcar
, pstats
->rtry
);
1182 pr_debug(" exdef=%-7d xmtrc=%d\n",
1183 pstats
->exdef
, pstats
->xmtrc
);
1185 /* RFS1--Receive Status (RCVSTS) */
1186 pr_debug(" oflo=%-7d clsn=%d\n",
1187 pstats
->oflo
, pstats
->clsn
);
1188 pr_debug(" fram=%-7d fcs=%d\n",
1189 pstats
->fram
, pstats
->fcs
);
1191 /* RFS2--Runt Packet Count (RNTPC) */
1192 /* RFS3--Receive Collision Count (RCVCC) */
1193 pr_debug(" rfs_rntpc=%-7d rfs_rcvcc=%d\n",
1194 pstats
->rfs_rntpc
, pstats
->rfs_rcvcc
);
1197 pr_debug(" jab=%-7d babl=%d\n",
1198 pstats
->jab
, pstats
->babl
);
1199 pr_debug(" cerr=%-7d rcvcco=%d\n",
1200 pstats
->cerr
, pstats
->rcvcco
);
1201 pr_debug(" rntpco=%-7d mpco=%d\n",
1202 pstats
->rntpco
, pstats
->mpco
);
1205 pr_debug(" mpc=%d\n", pstats
->mpc
);
1208 pr_debug(" rntpc=%d\n", pstats
->rntpc
);
1211 pr_debug(" rcvcc=%d\n", pstats
->rcvcc
);
1213 } /* pr_mace_stats */
1215 /* ----------------------------------------------------------------------------
1217 Update statistics. We change to register window 1, so this
1218 should be run single-threaded if the device is active. This is
1219 expected to be a rare operation, and it's simpler for the rest
1220 of the driver to assume that window 0 is always valid rather
1221 than use a special window-state variable.
1223 oflo & uflo should _never_ occur since it would mean the Xilinx
1224 was not able to transfer data between the MACE FIFO and the
1225 card's SRAM fast enough. If this happens, something is
1226 seriously wrong with the hardware.
1227 ---------------------------------------------------------------------------- */
1228 static void update_stats(unsigned int ioaddr
, struct net_device
*dev
)
1230 mace_private
*lp
= netdev_priv(dev
);
1232 lp
->mace_stats
.rcvcc
+= mace_read(lp
, ioaddr
, MACE_RCVCC
);
1233 lp
->mace_stats
.rntpc
+= mace_read(lp
, ioaddr
, MACE_RNTPC
);
1234 lp
->mace_stats
.mpc
+= mace_read(lp
, ioaddr
, MACE_MPC
);
1235 /* At this point, mace_stats is fully updated for this call.
1236 We may now update the linux_stats. */
1238 /* The MACE has no equivalent for linux_stats field which are commented
1241 /* lp->linux_stats.multicast; */
1242 lp
->linux_stats
.collisions
=
1243 lp
->mace_stats
.rcvcco
* 256 + lp
->mace_stats
.rcvcc
;
1244 /* Collision: The MACE may retry sending a packet 15 times
1245 before giving up. The retry count is in XMTRC.
1246 Does each retry constitute a collision?
1247 If so, why doesn't the RCVCC record these collisions? */
1249 /* detailed rx_errors: */
1250 lp
->linux_stats
.rx_length_errors
=
1251 lp
->mace_stats
.rntpco
* 256 + lp
->mace_stats
.rntpc
;
1252 /* lp->linux_stats.rx_over_errors */
1253 lp
->linux_stats
.rx_crc_errors
= lp
->mace_stats
.fcs
;
1254 lp
->linux_stats
.rx_frame_errors
= lp
->mace_stats
.fram
;
1255 lp
->linux_stats
.rx_fifo_errors
= lp
->mace_stats
.oflo
;
1256 lp
->linux_stats
.rx_missed_errors
=
1257 lp
->mace_stats
.mpco
* 256 + lp
->mace_stats
.mpc
;
1259 /* detailed tx_errors */
1260 lp
->linux_stats
.tx_aborted_errors
= lp
->mace_stats
.rtry
;
1261 lp
->linux_stats
.tx_carrier_errors
= lp
->mace_stats
.lcar
;
1262 /* LCAR usually results from bad cabling. */
1263 lp
->linux_stats
.tx_fifo_errors
= lp
->mace_stats
.uflo
;
1264 lp
->linux_stats
.tx_heartbeat_errors
= lp
->mace_stats
.cerr
;
1265 /* lp->linux_stats.tx_window_errors; */
1266 } /* update_stats */
1268 /* ----------------------------------------------------------------------------
1270 Gathers ethernet statistics from the MACE chip.
1271 ---------------------------------------------------------------------------- */
1272 static struct net_device_stats
*mace_get_stats(struct net_device
*dev
)
1274 mace_private
*lp
= netdev_priv(dev
);
1276 update_stats(dev
->base_addr
, dev
);
1278 pr_debug("%s: updating the statistics.\n", dev
->name
);
1279 pr_linux_stats(&lp
->linux_stats
);
1280 pr_mace_stats(&lp
->mace_stats
);
1282 return &lp
->linux_stats
;
1283 } /* net_device_stats */
1285 /* ----------------------------------------------------------------------------
1287 Modified from Am79C90 data sheet.
1288 ---------------------------------------------------------------------------- */
1290 #ifdef BROKEN_MULTICAST
1292 static void updateCRC(int *CRC
, int bit
)
1294 static const int poly
[]={
1299 }; /* CRC polynomial. poly[n] = coefficient of the x**n term of the
1300 CRC generator polynomial. */
1304 /* shift CRC and control bit (CRC[32]) */
1305 for (j
= 32; j
> 0; j
--)
1309 /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
1311 for (j
= 0; j
< 32; j
++)
1315 /* ----------------------------------------------------------------------------
1317 Build logical address filter.
1318 Modified from Am79C90 data sheet.
1321 ladrf: logical address filter (contents initialized to 0)
1322 adr: ethernet address
1323 ---------------------------------------------------------------------------- */
1324 static void BuildLAF(int *ladrf
, int *adr
)
1326 int CRC
[33]={1}; /* CRC register, 1 word/bit + extra control bit */
1328 int i
, byte
; /* temporary array indices */
1329 int hashcode
; /* the output object */
1333 for (byte
= 0; byte
< 6; byte
++)
1334 for (i
= 0; i
< 8; i
++)
1335 updateCRC(CRC
, (adr
[byte
] >> i
) & 1);
1338 for (i
= 0; i
< 6; i
++)
1339 hashcode
= (hashcode
<< 1) + CRC
[i
];
1341 byte
= hashcode
>> 3;
1342 ladrf
[byte
] |= (1 << (hashcode
& 7));
1346 printk(KERN_DEBUG
" adr =%pM\n", adr
);
1347 printk(KERN_DEBUG
" hashcode = %d(decimal), ladrf[0:63] =", hashcode
);
1348 for (i
= 0; i
< 8; i
++)
1349 pr_cont(" %02X", ladrf
[i
]);
1354 /* ----------------------------------------------------------------------------
1355 restore_multicast_list
1356 Restores the multicast filter for MACE chip to the last
1357 set_multicast_list() call.
1362 ---------------------------------------------------------------------------- */
1363 static void restore_multicast_list(struct net_device
*dev
)
1365 mace_private
*lp
= netdev_priv(dev
);
1366 int num_addrs
= lp
->multicast_num_addrs
;
1367 int *ladrf
= lp
->multicast_ladrf
;
1368 unsigned int ioaddr
= dev
->base_addr
;
1371 pr_debug("%s: restoring Rx mode to %d addresses.\n",
1372 dev
->name
, num_addrs
);
1374 if (num_addrs
> 0) {
1376 pr_debug("Attempt to restore multicast list detected.\n");
1378 mace_write(lp
, ioaddr
, MACE_IAC
, MACE_IAC_ADDRCHG
| MACE_IAC_LOGADDR
);
1379 /* Poll ADDRCHG bit */
1380 while (mace_read(lp
, ioaddr
, MACE_IAC
) & MACE_IAC_ADDRCHG
)
1382 /* Set LADRF register */
1383 for (i
= 0; i
< MACE_LADRF_LEN
; i
++)
1384 mace_write(lp
, ioaddr
, MACE_LADRF
, ladrf
[i
]);
1386 mace_write(lp
, ioaddr
, MACE_UTR
, MACE_UTR_RCVFCSE
| MACE_UTR_LOOP_EXTERNAL
);
1387 mace_write(lp
, ioaddr
, MACE_MACCC
, MACE_MACCC_ENXMT
| MACE_MACCC_ENRCV
);
1389 } else if (num_addrs
< 0) {
1391 /* Promiscuous mode: receive all packets */
1392 mace_write(lp
, ioaddr
, MACE_UTR
, MACE_UTR_LOOP_EXTERNAL
);
1393 mace_write(lp
, ioaddr
, MACE_MACCC
,
1394 MACE_MACCC_PROM
| MACE_MACCC_ENXMT
| MACE_MACCC_ENRCV
1400 mace_write(lp
, ioaddr
, MACE_UTR
, MACE_UTR_LOOP_EXTERNAL
);
1401 mace_write(lp
, ioaddr
, MACE_MACCC
, MACE_MACCC_ENXMT
| MACE_MACCC_ENRCV
);
1404 } /* restore_multicast_list */
1406 /* ----------------------------------------------------------------------------
1408 Set or clear the multicast filter for this adaptor.
1411 num_addrs == -1 Promiscuous mode, receive all packets
1412 num_addrs == 0 Normal mode, clear multicast list
1413 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
1414 best-effort filtering.
1418 ---------------------------------------------------------------------------- */
1420 static void set_multicast_list(struct net_device
*dev
)
1422 mace_private
*lp
= netdev_priv(dev
);
1423 int adr
[ETHER_ADDR_LEN
] = {0}; /* Ethernet address */
1424 struct netdev_hw_addr
*ha
;
1429 if (netdev_mc_count(dev
) != old
) {
1430 old
= netdev_mc_count(dev
);
1431 pr_debug("%s: setting Rx mode to %d addresses.\n",
1437 /* Set multicast_num_addrs. */
1438 lp
->multicast_num_addrs
= netdev_mc_count(dev
);
1440 /* Set multicast_ladrf. */
1441 if (num_addrs
> 0) {
1442 /* Calculate multicast logical address filter */
1443 memset(lp
->multicast_ladrf
, 0, MACE_LADRF_LEN
);
1444 netdev_for_each_mc_addr(ha
, dev
) {
1445 memcpy(adr
, ha
->addr
, ETHER_ADDR_LEN
);
1446 BuildLAF(lp
->multicast_ladrf
, adr
);
1450 restore_multicast_list(dev
);
1452 } /* set_multicast_list */
1454 #endif /* BROKEN_MULTICAST */
1456 static void restore_multicast_list(struct net_device
*dev
)
1458 unsigned int ioaddr
= dev
->base_addr
;
1459 mace_private
*lp
= netdev_priv(dev
);
1461 pr_debug("%s: restoring Rx mode to %d addresses.\n", dev
->name
,
1462 lp
->multicast_num_addrs
);
1464 if (dev
->flags
& IFF_PROMISC
) {
1465 /* Promiscuous mode: receive all packets */
1466 mace_write(lp
,ioaddr
, MACE_UTR
, MACE_UTR_LOOP_EXTERNAL
);
1467 mace_write(lp
, ioaddr
, MACE_MACCC
,
1468 MACE_MACCC_PROM
| MACE_MACCC_ENXMT
| MACE_MACCC_ENRCV
1472 mace_write(lp
, ioaddr
, MACE_UTR
, MACE_UTR_LOOP_EXTERNAL
);
1473 mace_write(lp
, ioaddr
, MACE_MACCC
, MACE_MACCC_ENXMT
| MACE_MACCC_ENRCV
);
1475 } /* restore_multicast_list */
1477 static void set_multicast_list(struct net_device
*dev
)
1479 mace_private
*lp
= netdev_priv(dev
);
1484 if (netdev_mc_count(dev
) != old
) {
1485 old
= netdev_mc_count(dev
);
1486 pr_debug("%s: setting Rx mode to %d addresses.\n",
1492 lp
->multicast_num_addrs
= netdev_mc_count(dev
);
1493 restore_multicast_list(dev
);
1495 } /* set_multicast_list */
1497 static const struct pcmcia_device_id nmclan_ids
[] = {
1498 PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
1499 PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
1502 MODULE_DEVICE_TABLE(pcmcia
, nmclan_ids
);
1504 static struct pcmcia_driver nmclan_cs_driver
= {
1505 .owner
= THIS_MODULE
,
1506 .name
= "nmclan_cs",
1507 .probe
= nmclan_probe
,
1508 .remove
= nmclan_detach
,
1509 .id_table
= nmclan_ids
,
1510 .suspend
= nmclan_suspend
,
1511 .resume
= nmclan_resume
,
1514 static int __init
init_nmclan_cs(void)
1516 return pcmcia_register_driver(&nmclan_cs_driver
);
1519 static void __exit
exit_nmclan_cs(void)
1521 pcmcia_unregister_driver(&nmclan_cs_driver
);
1524 module_init(init_nmclan_cs
);
1525 module_exit(exit_nmclan_cs
);