cris: add arch/cris/include/asm/serial.h
[linux-2.6/next.git] / drivers / net / wireless / ipw2x00 / ipw2100.c
blob3774dd034746286815af04f0322e7d4e778d6f32
1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 more details.
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
19 file called LICENSE.
21 Contact Information:
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
27 <jt@hpl.hp.com>
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
31 <j@w1.fi>
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
46 Theory of Operation
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
56 filled.
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
60 done with a packet.
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
72 list (tx_pend_list)
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
77 actual payload data.
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
88 from the kernel.
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
94 ...
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
128 and associated logic
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
152 #include <asm/io.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos_params.h>
166 #include <net/lib80211.h>
168 #include "ipw2100.h"
170 #define IPW2100_VERSION "git-1.2.2"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
177 static struct pm_qos_request_list ipw2100_pm_qos_req;
179 /* Debugging stuff */
180 #ifdef CONFIG_IPW2100_DEBUG
181 #define IPW2100_RX_DEBUG /* Reception debugging */
182 #endif
184 MODULE_DESCRIPTION(DRV_DESCRIPTION);
185 MODULE_VERSION(DRV_VERSION);
186 MODULE_AUTHOR(DRV_COPYRIGHT);
187 MODULE_LICENSE("GPL");
189 static int debug = 0;
190 static int network_mode = 0;
191 static int channel = 0;
192 static int associate = 0;
193 static int disable = 0;
194 #ifdef CONFIG_PM
195 static struct ipw2100_fw ipw2100_firmware;
196 #endif
198 #include <linux/moduleparam.h>
199 module_param(debug, int, 0444);
200 module_param_named(mode, network_mode, int, 0444);
201 module_param(channel, int, 0444);
202 module_param(associate, int, 0444);
203 module_param(disable, int, 0444);
205 MODULE_PARM_DESC(debug, "debug level");
206 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
207 MODULE_PARM_DESC(channel, "channel");
208 MODULE_PARM_DESC(associate, "auto associate when scanning (default off)");
209 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
211 static u32 ipw2100_debug_level = IPW_DL_NONE;
213 #ifdef CONFIG_IPW2100_DEBUG
214 #define IPW_DEBUG(level, message...) \
215 do { \
216 if (ipw2100_debug_level & (level)) { \
217 printk(KERN_DEBUG "ipw2100: %c %s ", \
218 in_interrupt() ? 'I' : 'U', __func__); \
219 printk(message); \
221 } while (0)
222 #else
223 #define IPW_DEBUG(level, message...) do {} while (0)
224 #endif /* CONFIG_IPW2100_DEBUG */
226 #ifdef CONFIG_IPW2100_DEBUG
227 static const char *command_types[] = {
228 "undefined",
229 "unused", /* HOST_ATTENTION */
230 "HOST_COMPLETE",
231 "unused", /* SLEEP */
232 "unused", /* HOST_POWER_DOWN */
233 "unused",
234 "SYSTEM_CONFIG",
235 "unused", /* SET_IMR */
236 "SSID",
237 "MANDATORY_BSSID",
238 "AUTHENTICATION_TYPE",
239 "ADAPTER_ADDRESS",
240 "PORT_TYPE",
241 "INTERNATIONAL_MODE",
242 "CHANNEL",
243 "RTS_THRESHOLD",
244 "FRAG_THRESHOLD",
245 "POWER_MODE",
246 "TX_RATES",
247 "BASIC_TX_RATES",
248 "WEP_KEY_INFO",
249 "unused",
250 "unused",
251 "unused",
252 "unused",
253 "WEP_KEY_INDEX",
254 "WEP_FLAGS",
255 "ADD_MULTICAST",
256 "CLEAR_ALL_MULTICAST",
257 "BEACON_INTERVAL",
258 "ATIM_WINDOW",
259 "CLEAR_STATISTICS",
260 "undefined",
261 "undefined",
262 "undefined",
263 "undefined",
264 "TX_POWER_INDEX",
265 "undefined",
266 "undefined",
267 "undefined",
268 "undefined",
269 "undefined",
270 "undefined",
271 "BROADCAST_SCAN",
272 "CARD_DISABLE",
273 "PREFERRED_BSSID",
274 "SET_SCAN_OPTIONS",
275 "SCAN_DWELL_TIME",
276 "SWEEP_TABLE",
277 "AP_OR_STATION_TABLE",
278 "GROUP_ORDINALS",
279 "SHORT_RETRY_LIMIT",
280 "LONG_RETRY_LIMIT",
281 "unused", /* SAVE_CALIBRATION */
282 "unused", /* RESTORE_CALIBRATION */
283 "undefined",
284 "undefined",
285 "undefined",
286 "HOST_PRE_POWER_DOWN",
287 "unused", /* HOST_INTERRUPT_COALESCING */
288 "undefined",
289 "CARD_DISABLE_PHY_OFF",
290 "MSDU_TX_RATES",
291 "undefined",
292 "SET_STATION_STAT_BITS",
293 "CLEAR_STATIONS_STAT_BITS",
294 "LEAP_ROGUE_MODE",
295 "SET_SECURITY_INFORMATION",
296 "DISASSOCIATION_BSSID",
297 "SET_WPA_ASS_IE"
299 #endif
301 #define WEXT_USECHANNELS 1
303 static const long ipw2100_frequencies[] = {
304 2412, 2417, 2422, 2427,
305 2432, 2437, 2442, 2447,
306 2452, 2457, 2462, 2467,
307 2472, 2484
310 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
312 static const long ipw2100_rates_11b[] = {
313 1000000,
314 2000000,
315 5500000,
316 11000000
319 static struct ieee80211_rate ipw2100_bg_rates[] = {
320 { .bitrate = 10 },
321 { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
322 { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
323 { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
326 #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
328 /* Pre-decl until we get the code solid and then we can clean it up */
329 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
330 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
331 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
333 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
334 static void ipw2100_queues_free(struct ipw2100_priv *priv);
335 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
337 static int ipw2100_fw_download(struct ipw2100_priv *priv,
338 struct ipw2100_fw *fw);
339 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
340 struct ipw2100_fw *fw);
341 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
342 size_t max);
343 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
344 size_t max);
345 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
346 struct ipw2100_fw *fw);
347 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
348 struct ipw2100_fw *fw);
349 static void ipw2100_wx_event_work(struct work_struct *work);
350 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
351 static struct iw_handler_def ipw2100_wx_handler_def;
353 static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
355 *val = readl((void __iomem *)(dev->base_addr + reg));
356 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
359 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
361 writel(val, (void __iomem *)(dev->base_addr + reg));
362 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
365 static inline void read_register_word(struct net_device *dev, u32 reg,
366 u16 * val)
368 *val = readw((void __iomem *)(dev->base_addr + reg));
369 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
372 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
374 *val = readb((void __iomem *)(dev->base_addr + reg));
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
378 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
380 writew(val, (void __iomem *)(dev->base_addr + reg));
381 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
384 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
386 writeb(val, (void __iomem *)(dev->base_addr + reg));
387 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
390 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
392 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
393 addr & IPW_REG_INDIRECT_ADDR_MASK);
394 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
397 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
399 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
400 addr & IPW_REG_INDIRECT_ADDR_MASK);
401 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
404 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
406 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
407 addr & IPW_REG_INDIRECT_ADDR_MASK);
408 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
411 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
413 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
414 addr & IPW_REG_INDIRECT_ADDR_MASK);
415 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
418 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
420 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
421 addr & IPW_REG_INDIRECT_ADDR_MASK);
422 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
425 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
427 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
428 addr & IPW_REG_INDIRECT_ADDR_MASK);
429 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
432 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
434 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
435 addr & IPW_REG_INDIRECT_ADDR_MASK);
438 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
440 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
443 static void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
444 const u8 * buf)
446 u32 aligned_addr;
447 u32 aligned_len;
448 u32 dif_len;
449 u32 i;
451 /* read first nibble byte by byte */
452 aligned_addr = addr & (~0x3);
453 dif_len = addr - aligned_addr;
454 if (dif_len) {
455 /* Start reading at aligned_addr + dif_len */
456 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
457 aligned_addr);
458 for (i = dif_len; i < 4; i++, buf++)
459 write_register_byte(dev,
460 IPW_REG_INDIRECT_ACCESS_DATA + i,
461 *buf);
463 len -= dif_len;
464 aligned_addr += 4;
467 /* read DWs through autoincrement registers */
468 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
469 aligned_len = len & (~0x3);
470 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
471 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
473 /* copy the last nibble */
474 dif_len = len - aligned_len;
475 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
476 for (i = 0; i < dif_len; i++, buf++)
477 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
478 *buf);
481 static void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
482 u8 * buf)
484 u32 aligned_addr;
485 u32 aligned_len;
486 u32 dif_len;
487 u32 i;
489 /* read first nibble byte by byte */
490 aligned_addr = addr & (~0x3);
491 dif_len = addr - aligned_addr;
492 if (dif_len) {
493 /* Start reading at aligned_addr + dif_len */
494 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
495 aligned_addr);
496 for (i = dif_len; i < 4; i++, buf++)
497 read_register_byte(dev,
498 IPW_REG_INDIRECT_ACCESS_DATA + i,
499 buf);
501 len -= dif_len;
502 aligned_addr += 4;
505 /* read DWs through autoincrement registers */
506 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
507 aligned_len = len & (~0x3);
508 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
509 read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
511 /* copy the last nibble */
512 dif_len = len - aligned_len;
513 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
514 for (i = 0; i < dif_len; i++, buf++)
515 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
518 static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
520 return (dev->base_addr &&
521 (readl
522 ((void __iomem *)(dev->base_addr +
523 IPW_REG_DOA_DEBUG_AREA_START))
524 == IPW_DATA_DOA_DEBUG_VALUE));
527 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
528 void *val, u32 * len)
530 struct ipw2100_ordinals *ordinals = &priv->ordinals;
531 u32 addr;
532 u32 field_info;
533 u16 field_len;
534 u16 field_count;
535 u32 total_length;
537 if (ordinals->table1_addr == 0) {
538 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
539 "before they have been loaded.\n");
540 return -EINVAL;
543 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
544 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
545 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
547 printk(KERN_WARNING DRV_NAME
548 ": ordinal buffer length too small, need %zd\n",
549 IPW_ORD_TAB_1_ENTRY_SIZE);
551 return -EINVAL;
554 read_nic_dword(priv->net_dev,
555 ordinals->table1_addr + (ord << 2), &addr);
556 read_nic_dword(priv->net_dev, addr, val);
558 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
560 return 0;
563 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
565 ord -= IPW_START_ORD_TAB_2;
567 /* get the address of statistic */
568 read_nic_dword(priv->net_dev,
569 ordinals->table2_addr + (ord << 3), &addr);
571 /* get the second DW of statistics ;
572 * two 16-bit words - first is length, second is count */
573 read_nic_dword(priv->net_dev,
574 ordinals->table2_addr + (ord << 3) + sizeof(u32),
575 &field_info);
577 /* get each entry length */
578 field_len = *((u16 *) & field_info);
580 /* get number of entries */
581 field_count = *(((u16 *) & field_info) + 1);
583 /* abort if no enough memory */
584 total_length = field_len * field_count;
585 if (total_length > *len) {
586 *len = total_length;
587 return -EINVAL;
590 *len = total_length;
591 if (!total_length)
592 return 0;
594 /* read the ordinal data from the SRAM */
595 read_nic_memory(priv->net_dev, addr, total_length, val);
597 return 0;
600 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
601 "in table 2\n", ord);
603 return -EINVAL;
606 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
607 u32 * len)
609 struct ipw2100_ordinals *ordinals = &priv->ordinals;
610 u32 addr;
612 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
613 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
614 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
615 IPW_DEBUG_INFO("wrong size\n");
616 return -EINVAL;
619 read_nic_dword(priv->net_dev,
620 ordinals->table1_addr + (ord << 2), &addr);
622 write_nic_dword(priv->net_dev, addr, *val);
624 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
626 return 0;
629 IPW_DEBUG_INFO("wrong table\n");
630 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
631 return -EINVAL;
633 return -EINVAL;
636 static char *snprint_line(char *buf, size_t count,
637 const u8 * data, u32 len, u32 ofs)
639 int out, i, j, l;
640 char c;
642 out = snprintf(buf, count, "%08X", ofs);
644 for (l = 0, i = 0; i < 2; i++) {
645 out += snprintf(buf + out, count - out, " ");
646 for (j = 0; j < 8 && l < len; j++, l++)
647 out += snprintf(buf + out, count - out, "%02X ",
648 data[(i * 8 + j)]);
649 for (; j < 8; j++)
650 out += snprintf(buf + out, count - out, " ");
653 out += snprintf(buf + out, count - out, " ");
654 for (l = 0, i = 0; i < 2; i++) {
655 out += snprintf(buf + out, count - out, " ");
656 for (j = 0; j < 8 && l < len; j++, l++) {
657 c = data[(i * 8 + j)];
658 if (!isascii(c) || !isprint(c))
659 c = '.';
661 out += snprintf(buf + out, count - out, "%c", c);
664 for (; j < 8; j++)
665 out += snprintf(buf + out, count - out, " ");
668 return buf;
671 static void printk_buf(int level, const u8 * data, u32 len)
673 char line[81];
674 u32 ofs = 0;
675 if (!(ipw2100_debug_level & level))
676 return;
678 while (len) {
679 printk(KERN_DEBUG "%s\n",
680 snprint_line(line, sizeof(line), &data[ofs],
681 min(len, 16U), ofs));
682 ofs += 16;
683 len -= min(len, 16U);
687 #define MAX_RESET_BACKOFF 10
689 static void schedule_reset(struct ipw2100_priv *priv)
691 unsigned long now = get_seconds();
693 /* If we haven't received a reset request within the backoff period,
694 * then we can reset the backoff interval so this reset occurs
695 * immediately */
696 if (priv->reset_backoff &&
697 (now - priv->last_reset > priv->reset_backoff))
698 priv->reset_backoff = 0;
700 priv->last_reset = get_seconds();
702 if (!(priv->status & STATUS_RESET_PENDING)) {
703 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
704 priv->net_dev->name, priv->reset_backoff);
705 netif_carrier_off(priv->net_dev);
706 netif_stop_queue(priv->net_dev);
707 priv->status |= STATUS_RESET_PENDING;
708 if (priv->reset_backoff)
709 schedule_delayed_work(&priv->reset_work,
710 priv->reset_backoff * HZ);
711 else
712 schedule_delayed_work(&priv->reset_work, 0);
714 if (priv->reset_backoff < MAX_RESET_BACKOFF)
715 priv->reset_backoff++;
717 wake_up_interruptible(&priv->wait_command_queue);
718 } else
719 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
720 priv->net_dev->name);
724 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
725 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
726 struct host_command *cmd)
728 struct list_head *element;
729 struct ipw2100_tx_packet *packet;
730 unsigned long flags;
731 int err = 0;
733 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
734 command_types[cmd->host_command], cmd->host_command,
735 cmd->host_command_length);
736 printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
737 cmd->host_command_length);
739 spin_lock_irqsave(&priv->low_lock, flags);
741 if (priv->fatal_error) {
742 IPW_DEBUG_INFO
743 ("Attempt to send command while hardware in fatal error condition.\n");
744 err = -EIO;
745 goto fail_unlock;
748 if (!(priv->status & STATUS_RUNNING)) {
749 IPW_DEBUG_INFO
750 ("Attempt to send command while hardware is not running.\n");
751 err = -EIO;
752 goto fail_unlock;
755 if (priv->status & STATUS_CMD_ACTIVE) {
756 IPW_DEBUG_INFO
757 ("Attempt to send command while another command is pending.\n");
758 err = -EBUSY;
759 goto fail_unlock;
762 if (list_empty(&priv->msg_free_list)) {
763 IPW_DEBUG_INFO("no available msg buffers\n");
764 goto fail_unlock;
767 priv->status |= STATUS_CMD_ACTIVE;
768 priv->messages_sent++;
770 element = priv->msg_free_list.next;
772 packet = list_entry(element, struct ipw2100_tx_packet, list);
773 packet->jiffy_start = jiffies;
775 /* initialize the firmware command packet */
776 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
777 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
778 packet->info.c_struct.cmd->host_command_len_reg =
779 cmd->host_command_length;
780 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
782 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
783 cmd->host_command_parameters,
784 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
786 list_del(element);
787 DEC_STAT(&priv->msg_free_stat);
789 list_add_tail(element, &priv->msg_pend_list);
790 INC_STAT(&priv->msg_pend_stat);
792 ipw2100_tx_send_commands(priv);
793 ipw2100_tx_send_data(priv);
795 spin_unlock_irqrestore(&priv->low_lock, flags);
798 * We must wait for this command to complete before another
799 * command can be sent... but if we wait more than 3 seconds
800 * then there is a problem.
803 err =
804 wait_event_interruptible_timeout(priv->wait_command_queue,
805 !(priv->
806 status & STATUS_CMD_ACTIVE),
807 HOST_COMPLETE_TIMEOUT);
809 if (err == 0) {
810 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
811 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
812 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
813 priv->status &= ~STATUS_CMD_ACTIVE;
814 schedule_reset(priv);
815 return -EIO;
818 if (priv->fatal_error) {
819 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
820 priv->net_dev->name);
821 return -EIO;
824 /* !!!!! HACK TEST !!!!!
825 * When lots of debug trace statements are enabled, the driver
826 * doesn't seem to have as many firmware restart cycles...
828 * As a test, we're sticking in a 1/100s delay here */
829 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
831 return 0;
833 fail_unlock:
834 spin_unlock_irqrestore(&priv->low_lock, flags);
836 return err;
840 * Verify the values and data access of the hardware
841 * No locks needed or used. No functions called.
843 static int ipw2100_verify(struct ipw2100_priv *priv)
845 u32 data1, data2;
846 u32 address;
848 u32 val1 = 0x76543210;
849 u32 val2 = 0xFEDCBA98;
851 /* Domain 0 check - all values should be DOA_DEBUG */
852 for (address = IPW_REG_DOA_DEBUG_AREA_START;
853 address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
854 read_register(priv->net_dev, address, &data1);
855 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
856 return -EIO;
859 /* Domain 1 check - use arbitrary read/write compare */
860 for (address = 0; address < 5; address++) {
861 /* The memory area is not used now */
862 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
863 val1);
864 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
865 val2);
866 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
867 &data1);
868 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
869 &data2);
870 if (val1 == data1 && val2 == data2)
871 return 0;
874 return -EIO;
879 * Loop until the CARD_DISABLED bit is the same value as the
880 * supplied parameter
882 * TODO: See if it would be more efficient to do a wait/wake
883 * cycle and have the completion event trigger the wakeup
886 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
887 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
889 int i;
890 u32 card_state;
891 u32 len = sizeof(card_state);
892 int err;
894 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
895 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
896 &card_state, &len);
897 if (err) {
898 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
899 "failed.\n");
900 return 0;
903 /* We'll break out if either the HW state says it is
904 * in the state we want, or if HOST_COMPLETE command
905 * finishes */
906 if ((card_state == state) ||
907 ((priv->status & STATUS_ENABLED) ?
908 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
909 if (state == IPW_HW_STATE_ENABLED)
910 priv->status |= STATUS_ENABLED;
911 else
912 priv->status &= ~STATUS_ENABLED;
914 return 0;
917 udelay(50);
920 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
921 state ? "DISABLED" : "ENABLED");
922 return -EIO;
925 /*********************************************************************
926 Procedure : sw_reset_and_clock
927 Purpose : Asserts s/w reset, asserts clock initialization
928 and waits for clock stabilization
929 ********************************************************************/
930 static int sw_reset_and_clock(struct ipw2100_priv *priv)
932 int i;
933 u32 r;
935 // assert s/w reset
936 write_register(priv->net_dev, IPW_REG_RESET_REG,
937 IPW_AUX_HOST_RESET_REG_SW_RESET);
939 // wait for clock stabilization
940 for (i = 0; i < 1000; i++) {
941 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
943 // check clock ready bit
944 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
945 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
946 break;
949 if (i == 1000)
950 return -EIO; // TODO: better error value
952 /* set "initialization complete" bit to move adapter to
953 * D0 state */
954 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
955 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
957 /* wait for clock stabilization */
958 for (i = 0; i < 10000; i++) {
959 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
961 /* check clock ready bit */
962 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
963 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
964 break;
967 if (i == 10000)
968 return -EIO; /* TODO: better error value */
970 /* set D0 standby bit */
971 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
972 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
973 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
975 return 0;
978 /*********************************************************************
979 Procedure : ipw2100_download_firmware
980 Purpose : Initiaze adapter after power on.
981 The sequence is:
982 1. assert s/w reset first!
983 2. awake clocks & wait for clock stabilization
984 3. hold ARC (don't ask me why...)
985 4. load Dino ucode and reset/clock init again
986 5. zero-out shared mem
987 6. download f/w
988 *******************************************************************/
989 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
991 u32 address;
992 int err;
994 #ifndef CONFIG_PM
995 /* Fetch the firmware and microcode */
996 struct ipw2100_fw ipw2100_firmware;
997 #endif
999 if (priv->fatal_error) {
1000 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1001 "fatal error %d. Interface must be brought down.\n",
1002 priv->net_dev->name, priv->fatal_error);
1003 return -EINVAL;
1005 #ifdef CONFIG_PM
1006 if (!ipw2100_firmware.version) {
1007 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
1008 if (err) {
1009 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1010 priv->net_dev->name, err);
1011 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1012 goto fail;
1015 #else
1016 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
1017 if (err) {
1018 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1019 priv->net_dev->name, err);
1020 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1021 goto fail;
1023 #endif
1024 priv->firmware_version = ipw2100_firmware.version;
1026 /* s/w reset and clock stabilization */
1027 err = sw_reset_and_clock(priv);
1028 if (err) {
1029 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1030 priv->net_dev->name, err);
1031 goto fail;
1034 err = ipw2100_verify(priv);
1035 if (err) {
1036 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1037 priv->net_dev->name, err);
1038 goto fail;
1041 /* Hold ARC */
1042 write_nic_dword(priv->net_dev,
1043 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
1045 /* allow ARC to run */
1046 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1048 /* load microcode */
1049 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1050 if (err) {
1051 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1052 priv->net_dev->name, err);
1053 goto fail;
1056 /* release ARC */
1057 write_nic_dword(priv->net_dev,
1058 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
1060 /* s/w reset and clock stabilization (again!!!) */
1061 err = sw_reset_and_clock(priv);
1062 if (err) {
1063 printk(KERN_ERR DRV_NAME
1064 ": %s: sw_reset_and_clock failed: %d\n",
1065 priv->net_dev->name, err);
1066 goto fail;
1069 /* load f/w */
1070 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1071 if (err) {
1072 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1073 priv->net_dev->name, err);
1074 goto fail;
1076 #ifndef CONFIG_PM
1078 * When the .resume method of the driver is called, the other
1079 * part of the system, i.e. the ide driver could still stay in
1080 * the suspend stage. This prevents us from loading the firmware
1081 * from the disk. --YZ
1084 /* free any storage allocated for firmware image */
1085 ipw2100_release_firmware(priv, &ipw2100_firmware);
1086 #endif
1088 /* zero out Domain 1 area indirectly (Si requirement) */
1089 for (address = IPW_HOST_FW_SHARED_AREA0;
1090 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1091 write_nic_dword(priv->net_dev, address, 0);
1092 for (address = IPW_HOST_FW_SHARED_AREA1;
1093 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1094 write_nic_dword(priv->net_dev, address, 0);
1095 for (address = IPW_HOST_FW_SHARED_AREA2;
1096 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1097 write_nic_dword(priv->net_dev, address, 0);
1098 for (address = IPW_HOST_FW_SHARED_AREA3;
1099 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1100 write_nic_dword(priv->net_dev, address, 0);
1101 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1102 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1103 write_nic_dword(priv->net_dev, address, 0);
1105 return 0;
1107 fail:
1108 ipw2100_release_firmware(priv, &ipw2100_firmware);
1109 return err;
1112 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1114 if (priv->status & STATUS_INT_ENABLED)
1115 return;
1116 priv->status |= STATUS_INT_ENABLED;
1117 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1120 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1122 if (!(priv->status & STATUS_INT_ENABLED))
1123 return;
1124 priv->status &= ~STATUS_INT_ENABLED;
1125 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1128 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1130 struct ipw2100_ordinals *ord = &priv->ordinals;
1132 IPW_DEBUG_INFO("enter\n");
1134 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1135 &ord->table1_addr);
1137 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1138 &ord->table2_addr);
1140 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1141 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1143 ord->table2_size &= 0x0000FFFF;
1145 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1146 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1147 IPW_DEBUG_INFO("exit\n");
1150 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1152 u32 reg = 0;
1154 * Set GPIO 3 writable by FW; GPIO 1 writable
1155 * by driver and enable clock
1157 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1158 IPW_BIT_GPIO_LED_OFF);
1159 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1162 static int rf_kill_active(struct ipw2100_priv *priv)
1164 #define MAX_RF_KILL_CHECKS 5
1165 #define RF_KILL_CHECK_DELAY 40
1167 unsigned short value = 0;
1168 u32 reg = 0;
1169 int i;
1171 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1172 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
1173 priv->status &= ~STATUS_RF_KILL_HW;
1174 return 0;
1177 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1178 udelay(RF_KILL_CHECK_DELAY);
1179 read_register(priv->net_dev, IPW_REG_GPIO, &reg);
1180 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1183 if (value == 0) {
1184 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
1185 priv->status |= STATUS_RF_KILL_HW;
1186 } else {
1187 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
1188 priv->status &= ~STATUS_RF_KILL_HW;
1191 return (value == 0);
1194 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1196 u32 addr, len;
1197 u32 val;
1200 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1202 len = sizeof(addr);
1203 if (ipw2100_get_ordinal
1204 (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
1205 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1206 __LINE__);
1207 return -EIO;
1210 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1213 * EEPROM version is the byte at offset 0xfd in firmware
1214 * We read 4 bytes, then shift out the byte we actually want */
1215 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1216 priv->eeprom_version = (val >> 24) & 0xFF;
1217 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1220 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1222 * notice that the EEPROM bit is reverse polarity, i.e.
1223 * bit = 0 signifies HW RF kill switch is supported
1224 * bit = 1 signifies HW RF kill switch is NOT supported
1226 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1227 if (!((val >> 24) & 0x01))
1228 priv->hw_features |= HW_FEATURE_RFKILL;
1230 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1231 (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
1233 return 0;
1237 * Start firmware execution after power on and intialization
1238 * The sequence is:
1239 * 1. Release ARC
1240 * 2. Wait for f/w initialization completes;
1242 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1244 int i;
1245 u32 inta, inta_mask, gpio;
1247 IPW_DEBUG_INFO("enter\n");
1249 if (priv->status & STATUS_RUNNING)
1250 return 0;
1253 * Initialize the hw - drive adapter to DO state by setting
1254 * init_done bit. Wait for clk_ready bit and Download
1255 * fw & dino ucode
1257 if (ipw2100_download_firmware(priv)) {
1258 printk(KERN_ERR DRV_NAME
1259 ": %s: Failed to power on the adapter.\n",
1260 priv->net_dev->name);
1261 return -EIO;
1264 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1265 * in the firmware RBD and TBD ring queue */
1266 ipw2100_queues_initialize(priv);
1268 ipw2100_hw_set_gpio(priv);
1270 /* TODO -- Look at disabling interrupts here to make sure none
1271 * get fired during FW initialization */
1273 /* Release ARC - clear reset bit */
1274 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1276 /* wait for f/w intialization complete */
1277 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1278 i = 5000;
1279 do {
1280 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1281 /* Todo... wait for sync command ... */
1283 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1285 /* check "init done" bit */
1286 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1287 /* reset "init done" bit */
1288 write_register(priv->net_dev, IPW_REG_INTA,
1289 IPW2100_INTA_FW_INIT_DONE);
1290 break;
1293 /* check error conditions : we check these after the firmware
1294 * check so that if there is an error, the interrupt handler
1295 * will see it and the adapter will be reset */
1296 if (inta &
1297 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1298 /* clear error conditions */
1299 write_register(priv->net_dev, IPW_REG_INTA,
1300 IPW2100_INTA_FATAL_ERROR |
1301 IPW2100_INTA_PARITY_ERROR);
1303 } while (--i);
1305 /* Clear out any pending INTAs since we aren't supposed to have
1306 * interrupts enabled at this point... */
1307 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1308 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1309 inta &= IPW_INTERRUPT_MASK;
1310 /* Clear out any pending interrupts */
1311 if (inta & inta_mask)
1312 write_register(priv->net_dev, IPW_REG_INTA, inta);
1314 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1315 i ? "SUCCESS" : "FAILED");
1317 if (!i) {
1318 printk(KERN_WARNING DRV_NAME
1319 ": %s: Firmware did not initialize.\n",
1320 priv->net_dev->name);
1321 return -EIO;
1324 /* allow firmware to write to GPIO1 & GPIO3 */
1325 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1327 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1329 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1331 /* Ready to receive commands */
1332 priv->status |= STATUS_RUNNING;
1334 /* The adapter has been reset; we are not associated */
1335 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1337 IPW_DEBUG_INFO("exit\n");
1339 return 0;
1342 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1344 if (!priv->fatal_error)
1345 return;
1347 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1348 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1349 priv->fatal_error = 0;
1352 /* NOTE: Our interrupt is disabled when this method is called */
1353 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1355 u32 reg;
1356 int i;
1358 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1360 ipw2100_hw_set_gpio(priv);
1362 /* Step 1. Stop Master Assert */
1363 write_register(priv->net_dev, IPW_REG_RESET_REG,
1364 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1366 /* Step 2. Wait for stop Master Assert
1367 * (not more than 50us, otherwise ret error */
1368 i = 5;
1369 do {
1370 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1371 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
1373 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1374 break;
1375 } while (--i);
1377 priv->status &= ~STATUS_RESET_PENDING;
1379 if (!i) {
1380 IPW_DEBUG_INFO
1381 ("exit - waited too long for master assert stop\n");
1382 return -EIO;
1385 write_register(priv->net_dev, IPW_REG_RESET_REG,
1386 IPW_AUX_HOST_RESET_REG_SW_RESET);
1388 /* Reset any fatal_error conditions */
1389 ipw2100_reset_fatalerror(priv);
1391 /* At this point, the adapter is now stopped and disabled */
1392 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1393 STATUS_ASSOCIATED | STATUS_ENABLED);
1395 return 0;
1399 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1401 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1403 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1404 * if STATUS_ASSN_LOST is sent.
1406 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1409 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1411 struct host_command cmd = {
1412 .host_command = CARD_DISABLE_PHY_OFF,
1413 .host_command_sequence = 0,
1414 .host_command_length = 0,
1416 int err, i;
1417 u32 val1, val2;
1419 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1421 /* Turn off the radio */
1422 err = ipw2100_hw_send_command(priv, &cmd);
1423 if (err)
1424 return err;
1426 for (i = 0; i < 2500; i++) {
1427 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1428 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1430 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1431 (val2 & IPW2100_COMMAND_PHY_OFF))
1432 return 0;
1434 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
1437 return -EIO;
1440 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1442 struct host_command cmd = {
1443 .host_command = HOST_COMPLETE,
1444 .host_command_sequence = 0,
1445 .host_command_length = 0
1447 int err = 0;
1449 IPW_DEBUG_HC("HOST_COMPLETE\n");
1451 if (priv->status & STATUS_ENABLED)
1452 return 0;
1454 mutex_lock(&priv->adapter_mutex);
1456 if (rf_kill_active(priv)) {
1457 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1458 goto fail_up;
1461 err = ipw2100_hw_send_command(priv, &cmd);
1462 if (err) {
1463 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1464 goto fail_up;
1467 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1468 if (err) {
1469 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1470 priv->net_dev->name);
1471 goto fail_up;
1474 if (priv->stop_hang_check) {
1475 priv->stop_hang_check = 0;
1476 schedule_delayed_work(&priv->hang_check, HZ / 2);
1479 fail_up:
1480 mutex_unlock(&priv->adapter_mutex);
1481 return err;
1484 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1486 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1488 struct host_command cmd = {
1489 .host_command = HOST_PRE_POWER_DOWN,
1490 .host_command_sequence = 0,
1491 .host_command_length = 0,
1493 int err, i;
1494 u32 reg;
1496 if (!(priv->status & STATUS_RUNNING))
1497 return 0;
1499 priv->status |= STATUS_STOPPING;
1501 /* We can only shut down the card if the firmware is operational. So,
1502 * if we haven't reset since a fatal_error, then we can not send the
1503 * shutdown commands. */
1504 if (!priv->fatal_error) {
1505 /* First, make sure the adapter is enabled so that the PHY_OFF
1506 * command can shut it down */
1507 ipw2100_enable_adapter(priv);
1509 err = ipw2100_hw_phy_off(priv);
1510 if (err)
1511 printk(KERN_WARNING DRV_NAME
1512 ": Error disabling radio %d\n", err);
1515 * If in D0-standby mode going directly to D3 may cause a
1516 * PCI bus violation. Therefore we must change out of the D0
1517 * state.
1519 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1520 * hardware from going into standby mode and will transition
1521 * out of D0-standby if it is already in that state.
1523 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1524 * driver upon completion. Once received, the driver can
1525 * proceed to the D3 state.
1527 * Prepare for power down command to fw. This command would
1528 * take HW out of D0-standby and prepare it for D3 state.
1530 * Currently FW does not support event notification for this
1531 * event. Therefore, skip waiting for it. Just wait a fixed
1532 * 100ms
1534 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1536 err = ipw2100_hw_send_command(priv, &cmd);
1537 if (err)
1538 printk(KERN_WARNING DRV_NAME ": "
1539 "%s: Power down command failed: Error %d\n",
1540 priv->net_dev->name, err);
1541 else
1542 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
1545 priv->status &= ~STATUS_ENABLED;
1548 * Set GPIO 3 writable by FW; GPIO 1 writable
1549 * by driver and enable clock
1551 ipw2100_hw_set_gpio(priv);
1554 * Power down adapter. Sequence:
1555 * 1. Stop master assert (RESET_REG[9]=1)
1556 * 2. Wait for stop master (RESET_REG[8]==1)
1557 * 3. S/w reset assert (RESET_REG[7] = 1)
1560 /* Stop master assert */
1561 write_register(priv->net_dev, IPW_REG_RESET_REG,
1562 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1564 /* wait stop master not more than 50 usec.
1565 * Otherwise return error. */
1566 for (i = 5; i > 0; i--) {
1567 udelay(10);
1569 /* Check master stop bit */
1570 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
1572 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1573 break;
1576 if (i == 0)
1577 printk(KERN_WARNING DRV_NAME
1578 ": %s: Could now power down adapter.\n",
1579 priv->net_dev->name);
1581 /* assert s/w reset */
1582 write_register(priv->net_dev, IPW_REG_RESET_REG,
1583 IPW_AUX_HOST_RESET_REG_SW_RESET);
1585 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1587 return 0;
1590 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1592 struct host_command cmd = {
1593 .host_command = CARD_DISABLE,
1594 .host_command_sequence = 0,
1595 .host_command_length = 0
1597 int err = 0;
1599 IPW_DEBUG_HC("CARD_DISABLE\n");
1601 if (!(priv->status & STATUS_ENABLED))
1602 return 0;
1604 /* Make sure we clear the associated state */
1605 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1607 if (!priv->stop_hang_check) {
1608 priv->stop_hang_check = 1;
1609 cancel_delayed_work(&priv->hang_check);
1612 mutex_lock(&priv->adapter_mutex);
1614 err = ipw2100_hw_send_command(priv, &cmd);
1615 if (err) {
1616 printk(KERN_WARNING DRV_NAME
1617 ": exit - failed to send CARD_DISABLE command\n");
1618 goto fail_up;
1621 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1622 if (err) {
1623 printk(KERN_WARNING DRV_NAME
1624 ": exit - card failed to change to DISABLED\n");
1625 goto fail_up;
1628 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1630 fail_up:
1631 mutex_unlock(&priv->adapter_mutex);
1632 return err;
1635 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1637 struct host_command cmd = {
1638 .host_command = SET_SCAN_OPTIONS,
1639 .host_command_sequence = 0,
1640 .host_command_length = 8
1642 int err;
1644 IPW_DEBUG_INFO("enter\n");
1646 IPW_DEBUG_SCAN("setting scan options\n");
1648 cmd.host_command_parameters[0] = 0;
1650 if (!(priv->config & CFG_ASSOCIATE))
1651 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1652 if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
1653 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1654 if (priv->config & CFG_PASSIVE_SCAN)
1655 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1657 cmd.host_command_parameters[1] = priv->channel_mask;
1659 err = ipw2100_hw_send_command(priv, &cmd);
1661 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1662 cmd.host_command_parameters[0]);
1664 return err;
1667 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1669 struct host_command cmd = {
1670 .host_command = BROADCAST_SCAN,
1671 .host_command_sequence = 0,
1672 .host_command_length = 4
1674 int err;
1676 IPW_DEBUG_HC("START_SCAN\n");
1678 cmd.host_command_parameters[0] = 0;
1680 /* No scanning if in monitor mode */
1681 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1682 return 1;
1684 if (priv->status & STATUS_SCANNING) {
1685 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1686 return 0;
1689 IPW_DEBUG_INFO("enter\n");
1691 /* Not clearing here; doing so makes iwlist always return nothing...
1693 * We should modify the table logic to use aging tables vs. clearing
1694 * the table on each scan start.
1696 IPW_DEBUG_SCAN("starting scan\n");
1698 priv->status |= STATUS_SCANNING;
1699 err = ipw2100_hw_send_command(priv, &cmd);
1700 if (err)
1701 priv->status &= ~STATUS_SCANNING;
1703 IPW_DEBUG_INFO("exit\n");
1705 return err;
1708 static const struct libipw_geo ipw_geos[] = {
1709 { /* Restricted */
1710 "---",
1711 .bg_channels = 14,
1712 .bg = {{2412, 1}, {2417, 2}, {2422, 3},
1713 {2427, 4}, {2432, 5}, {2437, 6},
1714 {2442, 7}, {2447, 8}, {2452, 9},
1715 {2457, 10}, {2462, 11}, {2467, 12},
1716 {2472, 13}, {2484, 14}},
1720 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1722 unsigned long flags;
1723 int rc = 0;
1724 u32 lock;
1725 u32 ord_len = sizeof(lock);
1727 /* Age scan list entries found before suspend */
1728 if (priv->suspend_time) {
1729 libipw_networks_age(priv->ieee, priv->suspend_time);
1730 priv->suspend_time = 0;
1733 /* Quiet if manually disabled. */
1734 if (priv->status & STATUS_RF_KILL_SW) {
1735 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1736 "switch\n", priv->net_dev->name);
1737 return 0;
1740 /* the ipw2100 hardware really doesn't want power management delays
1741 * longer than 175usec
1743 pm_qos_update_request(&ipw2100_pm_qos_req, 175);
1745 /* If the interrupt is enabled, turn it off... */
1746 spin_lock_irqsave(&priv->low_lock, flags);
1747 ipw2100_disable_interrupts(priv);
1749 /* Reset any fatal_error conditions */
1750 ipw2100_reset_fatalerror(priv);
1751 spin_unlock_irqrestore(&priv->low_lock, flags);
1753 if (priv->status & STATUS_POWERED ||
1754 (priv->status & STATUS_RESET_PENDING)) {
1755 /* Power cycle the card ... */
1756 if (ipw2100_power_cycle_adapter(priv)) {
1757 printk(KERN_WARNING DRV_NAME
1758 ": %s: Could not cycle adapter.\n",
1759 priv->net_dev->name);
1760 rc = 1;
1761 goto exit;
1763 } else
1764 priv->status |= STATUS_POWERED;
1766 /* Load the firmware, start the clocks, etc. */
1767 if (ipw2100_start_adapter(priv)) {
1768 printk(KERN_ERR DRV_NAME
1769 ": %s: Failed to start the firmware.\n",
1770 priv->net_dev->name);
1771 rc = 1;
1772 goto exit;
1775 ipw2100_initialize_ordinals(priv);
1777 /* Determine capabilities of this particular HW configuration */
1778 if (ipw2100_get_hw_features(priv)) {
1779 printk(KERN_ERR DRV_NAME
1780 ": %s: Failed to determine HW features.\n",
1781 priv->net_dev->name);
1782 rc = 1;
1783 goto exit;
1786 /* Initialize the geo */
1787 if (libipw_set_geo(priv->ieee, &ipw_geos[0])) {
1788 printk(KERN_WARNING DRV_NAME "Could not set geo\n");
1789 return 0;
1791 priv->ieee->freq_band = LIBIPW_24GHZ_BAND;
1793 lock = LOCK_NONE;
1794 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1795 printk(KERN_ERR DRV_NAME
1796 ": %s: Failed to clear ordinal lock.\n",
1797 priv->net_dev->name);
1798 rc = 1;
1799 goto exit;
1802 priv->status &= ~STATUS_SCANNING;
1804 if (rf_kill_active(priv)) {
1805 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1806 priv->net_dev->name);
1808 if (priv->stop_rf_kill) {
1809 priv->stop_rf_kill = 0;
1810 schedule_delayed_work(&priv->rf_kill,
1811 round_jiffies_relative(HZ));
1814 deferred = 1;
1817 /* Turn on the interrupt so that commands can be processed */
1818 ipw2100_enable_interrupts(priv);
1820 /* Send all of the commands that must be sent prior to
1821 * HOST_COMPLETE */
1822 if (ipw2100_adapter_setup(priv)) {
1823 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1824 priv->net_dev->name);
1825 rc = 1;
1826 goto exit;
1829 if (!deferred) {
1830 /* Enable the adapter - sends HOST_COMPLETE */
1831 if (ipw2100_enable_adapter(priv)) {
1832 printk(KERN_ERR DRV_NAME ": "
1833 "%s: failed in call to enable adapter.\n",
1834 priv->net_dev->name);
1835 ipw2100_hw_stop_adapter(priv);
1836 rc = 1;
1837 goto exit;
1840 /* Start a scan . . . */
1841 ipw2100_set_scan_options(priv);
1842 ipw2100_start_scan(priv);
1845 exit:
1846 return rc;
1849 static void ipw2100_down(struct ipw2100_priv *priv)
1851 unsigned long flags;
1852 union iwreq_data wrqu = {
1853 .ap_addr = {
1854 .sa_family = ARPHRD_ETHER}
1856 int associated = priv->status & STATUS_ASSOCIATED;
1858 /* Kill the RF switch timer */
1859 if (!priv->stop_rf_kill) {
1860 priv->stop_rf_kill = 1;
1861 cancel_delayed_work(&priv->rf_kill);
1864 /* Kill the firmware hang check timer */
1865 if (!priv->stop_hang_check) {
1866 priv->stop_hang_check = 1;
1867 cancel_delayed_work(&priv->hang_check);
1870 /* Kill any pending resets */
1871 if (priv->status & STATUS_RESET_PENDING)
1872 cancel_delayed_work(&priv->reset_work);
1874 /* Make sure the interrupt is on so that FW commands will be
1875 * processed correctly */
1876 spin_lock_irqsave(&priv->low_lock, flags);
1877 ipw2100_enable_interrupts(priv);
1878 spin_unlock_irqrestore(&priv->low_lock, flags);
1880 if (ipw2100_hw_stop_adapter(priv))
1881 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1882 priv->net_dev->name);
1884 /* Do not disable the interrupt until _after_ we disable
1885 * the adaptor. Otherwise the CARD_DISABLE command will never
1886 * be ack'd by the firmware */
1887 spin_lock_irqsave(&priv->low_lock, flags);
1888 ipw2100_disable_interrupts(priv);
1889 spin_unlock_irqrestore(&priv->low_lock, flags);
1891 pm_qos_update_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
1893 /* We have to signal any supplicant if we are disassociating */
1894 if (associated)
1895 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1897 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1898 netif_carrier_off(priv->net_dev);
1899 netif_stop_queue(priv->net_dev);
1902 /* Called by register_netdev() */
1903 static int ipw2100_net_init(struct net_device *dev)
1905 struct ipw2100_priv *priv = libipw_priv(dev);
1906 const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
1907 struct wireless_dev *wdev = &priv->ieee->wdev;
1908 int ret;
1909 int i;
1911 ret = ipw2100_up(priv, 1);
1912 if (ret)
1913 return ret;
1915 memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
1917 /* fill-out priv->ieee->bg_band */
1918 if (geo->bg_channels) {
1919 struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
1921 bg_band->band = IEEE80211_BAND_2GHZ;
1922 bg_band->n_channels = geo->bg_channels;
1923 bg_band->channels = kcalloc(geo->bg_channels,
1924 sizeof(struct ieee80211_channel),
1925 GFP_KERNEL);
1926 if (!bg_band->channels) {
1927 ipw2100_down(priv);
1928 return -ENOMEM;
1930 /* translate geo->bg to bg_band.channels */
1931 for (i = 0; i < geo->bg_channels; i++) {
1932 bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
1933 bg_band->channels[i].center_freq = geo->bg[i].freq;
1934 bg_band->channels[i].hw_value = geo->bg[i].channel;
1935 bg_band->channels[i].max_power = geo->bg[i].max_power;
1936 if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
1937 bg_band->channels[i].flags |=
1938 IEEE80211_CHAN_PASSIVE_SCAN;
1939 if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
1940 bg_band->channels[i].flags |=
1941 IEEE80211_CHAN_NO_IBSS;
1942 if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
1943 bg_band->channels[i].flags |=
1944 IEEE80211_CHAN_RADAR;
1945 /* No equivalent for LIBIPW_CH_80211H_RULES,
1946 LIBIPW_CH_UNIFORM_SPREADING, or
1947 LIBIPW_CH_B_ONLY... */
1949 /* point at bitrate info */
1950 bg_band->bitrates = ipw2100_bg_rates;
1951 bg_band->n_bitrates = RATE_COUNT;
1953 wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
1956 set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
1957 if (wiphy_register(wdev->wiphy)) {
1958 ipw2100_down(priv);
1959 return -EIO;
1961 return 0;
1964 static void ipw2100_reset_adapter(struct work_struct *work)
1966 struct ipw2100_priv *priv =
1967 container_of(work, struct ipw2100_priv, reset_work.work);
1968 unsigned long flags;
1969 union iwreq_data wrqu = {
1970 .ap_addr = {
1971 .sa_family = ARPHRD_ETHER}
1973 int associated = priv->status & STATUS_ASSOCIATED;
1975 spin_lock_irqsave(&priv->low_lock, flags);
1976 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
1977 priv->resets++;
1978 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1979 priv->status |= STATUS_SECURITY_UPDATED;
1981 /* Force a power cycle even if interface hasn't been opened
1982 * yet */
1983 cancel_delayed_work(&priv->reset_work);
1984 priv->status |= STATUS_RESET_PENDING;
1985 spin_unlock_irqrestore(&priv->low_lock, flags);
1987 mutex_lock(&priv->action_mutex);
1988 /* stop timed checks so that they don't interfere with reset */
1989 priv->stop_hang_check = 1;
1990 cancel_delayed_work(&priv->hang_check);
1992 /* We have to signal any supplicant if we are disassociating */
1993 if (associated)
1994 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1996 ipw2100_up(priv, 0);
1997 mutex_unlock(&priv->action_mutex);
2001 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
2004 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2005 int ret;
2006 unsigned int len, essid_len;
2007 char essid[IW_ESSID_MAX_SIZE];
2008 u32 txrate;
2009 u32 chan;
2010 char *txratename;
2011 u8 bssid[ETH_ALEN];
2012 DECLARE_SSID_BUF(ssid);
2015 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2016 * an actual MAC of the AP. Seems like FW sets this
2017 * address too late. Read it later and expose through
2018 * /proc or schedule a later task to query and update
2021 essid_len = IW_ESSID_MAX_SIZE;
2022 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
2023 essid, &essid_len);
2024 if (ret) {
2025 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2026 __LINE__);
2027 return;
2030 len = sizeof(u32);
2031 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
2032 if (ret) {
2033 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2034 __LINE__);
2035 return;
2038 len = sizeof(u32);
2039 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
2040 if (ret) {
2041 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2042 __LINE__);
2043 return;
2045 len = ETH_ALEN;
2046 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
2047 if (ret) {
2048 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2049 __LINE__);
2050 return;
2052 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
2054 switch (txrate) {
2055 case TX_RATE_1_MBIT:
2056 txratename = "1Mbps";
2057 break;
2058 case TX_RATE_2_MBIT:
2059 txratename = "2Mbsp";
2060 break;
2061 case TX_RATE_5_5_MBIT:
2062 txratename = "5.5Mbps";
2063 break;
2064 case TX_RATE_11_MBIT:
2065 txratename = "11Mbps";
2066 break;
2067 default:
2068 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
2069 txratename = "unknown rate";
2070 break;
2073 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2074 priv->net_dev->name, print_ssid(ssid, essid, essid_len),
2075 txratename, chan, bssid);
2077 /* now we copy read ssid into dev */
2078 if (!(priv->config & CFG_STATIC_ESSID)) {
2079 priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
2080 memcpy(priv->essid, essid, priv->essid_len);
2082 priv->channel = chan;
2083 memcpy(priv->bssid, bssid, ETH_ALEN);
2085 priv->status |= STATUS_ASSOCIATING;
2086 priv->connect_start = get_seconds();
2088 schedule_delayed_work(&priv->wx_event_work, HZ / 10);
2091 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
2092 int length, int batch_mode)
2094 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
2095 struct host_command cmd = {
2096 .host_command = SSID,
2097 .host_command_sequence = 0,
2098 .host_command_length = ssid_len
2100 int err;
2101 DECLARE_SSID_BUF(ssid);
2103 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid, essid, ssid_len));
2105 if (ssid_len)
2106 memcpy(cmd.host_command_parameters, essid, ssid_len);
2108 if (!batch_mode) {
2109 err = ipw2100_disable_adapter(priv);
2110 if (err)
2111 return err;
2114 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2115 * disable auto association -- so we cheat by setting a bogus SSID */
2116 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2117 int i;
2118 u8 *bogus = (u8 *) cmd.host_command_parameters;
2119 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2120 bogus[i] = 0x18 + i;
2121 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2124 /* NOTE: We always send the SSID command even if the provided ESSID is
2125 * the same as what we currently think is set. */
2127 err = ipw2100_hw_send_command(priv, &cmd);
2128 if (!err) {
2129 memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
2130 memcpy(priv->essid, essid, ssid_len);
2131 priv->essid_len = ssid_len;
2134 if (!batch_mode) {
2135 if (ipw2100_enable_adapter(priv))
2136 err = -EIO;
2139 return err;
2142 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2144 DECLARE_SSID_BUF(ssid);
2146 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2147 "disassociated: '%s' %pM\n",
2148 print_ssid(ssid, priv->essid, priv->essid_len),
2149 priv->bssid);
2151 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2153 if (priv->status & STATUS_STOPPING) {
2154 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2155 return;
2158 memset(priv->bssid, 0, ETH_ALEN);
2159 memset(priv->ieee->bssid, 0, ETH_ALEN);
2161 netif_carrier_off(priv->net_dev);
2162 netif_stop_queue(priv->net_dev);
2164 if (!(priv->status & STATUS_RUNNING))
2165 return;
2167 if (priv->status & STATUS_SECURITY_UPDATED)
2168 schedule_delayed_work(&priv->security_work, 0);
2170 schedule_delayed_work(&priv->wx_event_work, 0);
2173 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2175 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2176 priv->net_dev->name);
2178 /* RF_KILL is now enabled (else we wouldn't be here) */
2179 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
2180 priv->status |= STATUS_RF_KILL_HW;
2182 /* Make sure the RF Kill check timer is running */
2183 priv->stop_rf_kill = 0;
2184 cancel_delayed_work(&priv->rf_kill);
2185 schedule_delayed_work(&priv->rf_kill, round_jiffies_relative(HZ));
2188 static void send_scan_event(void *data)
2190 struct ipw2100_priv *priv = data;
2191 union iwreq_data wrqu;
2193 wrqu.data.length = 0;
2194 wrqu.data.flags = 0;
2195 wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
2198 static void ipw2100_scan_event_later(struct work_struct *work)
2200 send_scan_event(container_of(work, struct ipw2100_priv,
2201 scan_event_later.work));
2204 static void ipw2100_scan_event_now(struct work_struct *work)
2206 send_scan_event(container_of(work, struct ipw2100_priv,
2207 scan_event_now));
2210 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2212 IPW_DEBUG_SCAN("scan complete\n");
2213 /* Age the scan results... */
2214 priv->ieee->scans++;
2215 priv->status &= ~STATUS_SCANNING;
2217 /* Only userspace-requested scan completion events go out immediately */
2218 if (!priv->user_requested_scan) {
2219 if (!delayed_work_pending(&priv->scan_event_later))
2220 schedule_delayed_work(&priv->scan_event_later,
2221 round_jiffies_relative(msecs_to_jiffies(4000)));
2222 } else {
2223 priv->user_requested_scan = 0;
2224 cancel_delayed_work(&priv->scan_event_later);
2225 schedule_work(&priv->scan_event_now);
2229 #ifdef CONFIG_IPW2100_DEBUG
2230 #define IPW2100_HANDLER(v, f) { v, f, # v }
2231 struct ipw2100_status_indicator {
2232 int status;
2233 void (*cb) (struct ipw2100_priv * priv, u32 status);
2234 char *name;
2236 #else
2237 #define IPW2100_HANDLER(v, f) { v, f }
2238 struct ipw2100_status_indicator {
2239 int status;
2240 void (*cb) (struct ipw2100_priv * priv, u32 status);
2242 #endif /* CONFIG_IPW2100_DEBUG */
2244 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2246 IPW_DEBUG_SCAN("Scanning...\n");
2247 priv->status |= STATUS_SCANNING;
2250 static const struct ipw2100_status_indicator status_handlers[] = {
2251 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2252 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2253 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2254 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2255 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2256 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2257 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2258 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2259 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2260 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2261 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2262 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2263 IPW2100_HANDLER(-1, NULL)
2266 static void isr_status_change(struct ipw2100_priv *priv, int status)
2268 int i;
2270 if (status == IPW_STATE_SCANNING &&
2271 priv->status & STATUS_ASSOCIATED &&
2272 !(priv->status & STATUS_SCANNING)) {
2273 IPW_DEBUG_INFO("Scan detected while associated, with "
2274 "no scan request. Restarting firmware.\n");
2276 /* Wake up any sleeping jobs */
2277 schedule_reset(priv);
2280 for (i = 0; status_handlers[i].status != -1; i++) {
2281 if (status == status_handlers[i].status) {
2282 IPW_DEBUG_NOTIF("Status change: %s\n",
2283 status_handlers[i].name);
2284 if (status_handlers[i].cb)
2285 status_handlers[i].cb(priv, status);
2286 priv->wstats.status = status;
2287 return;
2291 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2294 static void isr_rx_complete_command(struct ipw2100_priv *priv,
2295 struct ipw2100_cmd_header *cmd)
2297 #ifdef CONFIG_IPW2100_DEBUG
2298 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2299 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2300 command_types[cmd->host_command_reg],
2301 cmd->host_command_reg);
2303 #endif
2304 if (cmd->host_command_reg == HOST_COMPLETE)
2305 priv->status |= STATUS_ENABLED;
2307 if (cmd->host_command_reg == CARD_DISABLE)
2308 priv->status &= ~STATUS_ENABLED;
2310 priv->status &= ~STATUS_CMD_ACTIVE;
2312 wake_up_interruptible(&priv->wait_command_queue);
2315 #ifdef CONFIG_IPW2100_DEBUG
2316 static const char *frame_types[] = {
2317 "COMMAND_STATUS_VAL",
2318 "STATUS_CHANGE_VAL",
2319 "P80211_DATA_VAL",
2320 "P8023_DATA_VAL",
2321 "HOST_NOTIFICATION_VAL"
2323 #endif
2325 static int ipw2100_alloc_skb(struct ipw2100_priv *priv,
2326 struct ipw2100_rx_packet *packet)
2328 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2329 if (!packet->skb)
2330 return -ENOMEM;
2332 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2333 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2334 sizeof(struct ipw2100_rx),
2335 PCI_DMA_FROMDEVICE);
2336 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2337 * dma_addr */
2339 return 0;
2342 #define SEARCH_ERROR 0xffffffff
2343 #define SEARCH_FAIL 0xfffffffe
2344 #define SEARCH_SUCCESS 0xfffffff0
2345 #define SEARCH_DISCARD 0
2346 #define SEARCH_SNAPSHOT 1
2348 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2349 static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2351 int i;
2352 if (!priv->snapshot[0])
2353 return;
2354 for (i = 0; i < 0x30; i++)
2355 kfree(priv->snapshot[i]);
2356 priv->snapshot[0] = NULL;
2359 #ifdef IPW2100_DEBUG_C3
2360 static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2362 int i;
2363 if (priv->snapshot[0])
2364 return 1;
2365 for (i = 0; i < 0x30; i++) {
2366 priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC);
2367 if (!priv->snapshot[i]) {
2368 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2369 "buffer %d\n", priv->net_dev->name, i);
2370 while (i > 0)
2371 kfree(priv->snapshot[--i]);
2372 priv->snapshot[0] = NULL;
2373 return 0;
2377 return 1;
2380 static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
2381 size_t len, int mode)
2383 u32 i, j;
2384 u32 tmp;
2385 u8 *s, *d;
2386 u32 ret;
2388 s = in_buf;
2389 if (mode == SEARCH_SNAPSHOT) {
2390 if (!ipw2100_snapshot_alloc(priv))
2391 mode = SEARCH_DISCARD;
2394 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2395 read_nic_dword(priv->net_dev, i, &tmp);
2396 if (mode == SEARCH_SNAPSHOT)
2397 *(u32 *) SNAPSHOT_ADDR(i) = tmp;
2398 if (ret == SEARCH_FAIL) {
2399 d = (u8 *) & tmp;
2400 for (j = 0; j < 4; j++) {
2401 if (*s != *d) {
2402 s = in_buf;
2403 continue;
2406 s++;
2407 d++;
2409 if ((s - in_buf) == len)
2410 ret = (i + j) - len + 1;
2412 } else if (mode == SEARCH_DISCARD)
2413 return ret;
2416 return ret;
2418 #endif
2422 * 0) Disconnect the SKB from the firmware (just unmap)
2423 * 1) Pack the ETH header into the SKB
2424 * 2) Pass the SKB to the network stack
2426 * When packet is provided by the firmware, it contains the following:
2428 * . libipw_hdr
2429 * . libipw_snap_hdr
2431 * The size of the constructed ethernet
2434 #ifdef IPW2100_RX_DEBUG
2435 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2436 #endif
2438 static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
2440 #ifdef IPW2100_DEBUG_C3
2441 struct ipw2100_status *status = &priv->status_queue.drv[i];
2442 u32 match, reg;
2443 int j;
2444 #endif
2446 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2447 i * sizeof(struct ipw2100_status));
2449 #ifdef IPW2100_DEBUG_C3
2450 /* Halt the firmware so we can get a good image */
2451 write_register(priv->net_dev, IPW_REG_RESET_REG,
2452 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2453 j = 5;
2454 do {
2455 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2456 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
2458 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2459 break;
2460 } while (j--);
2462 match = ipw2100_match_buf(priv, (u8 *) status,
2463 sizeof(struct ipw2100_status),
2464 SEARCH_SNAPSHOT);
2465 if (match < SEARCH_SUCCESS)
2466 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2467 "offset 0x%06X, length %d:\n",
2468 priv->net_dev->name, match,
2469 sizeof(struct ipw2100_status));
2470 else
2471 IPW_DEBUG_INFO("%s: No DMA status match in "
2472 "Firmware.\n", priv->net_dev->name);
2474 printk_buf((u8 *) priv->status_queue.drv,
2475 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2476 #endif
2478 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2479 priv->net_dev->stats.rx_errors++;
2480 schedule_reset(priv);
2483 static void isr_rx(struct ipw2100_priv *priv, int i,
2484 struct libipw_rx_stats *stats)
2486 struct net_device *dev = priv->net_dev;
2487 struct ipw2100_status *status = &priv->status_queue.drv[i];
2488 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2490 IPW_DEBUG_RX("Handler...\n");
2492 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2493 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2494 " Dropping.\n",
2495 dev->name,
2496 status->frame_size, skb_tailroom(packet->skb));
2497 dev->stats.rx_errors++;
2498 return;
2501 if (unlikely(!netif_running(dev))) {
2502 dev->stats.rx_errors++;
2503 priv->wstats.discard.misc++;
2504 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2505 return;
2508 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2509 !(priv->status & STATUS_ASSOCIATED))) {
2510 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2511 priv->wstats.discard.misc++;
2512 return;
2515 pci_unmap_single(priv->pci_dev,
2516 packet->dma_addr,
2517 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2519 skb_put(packet->skb, status->frame_size);
2521 #ifdef IPW2100_RX_DEBUG
2522 /* Make a copy of the frame so we can dump it to the logs if
2523 * libipw_rx fails */
2524 skb_copy_from_linear_data(packet->skb, packet_data,
2525 min_t(u32, status->frame_size,
2526 IPW_RX_NIC_BUFFER_LENGTH));
2527 #endif
2529 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2530 #ifdef IPW2100_RX_DEBUG
2531 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2532 dev->name);
2533 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2534 #endif
2535 dev->stats.rx_errors++;
2537 /* libipw_rx failed, so it didn't free the SKB */
2538 dev_kfree_skb_any(packet->skb);
2539 packet->skb = NULL;
2542 /* We need to allocate a new SKB and attach it to the RDB. */
2543 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2544 printk(KERN_WARNING DRV_NAME ": "
2545 "%s: Unable to allocate SKB onto RBD ring - disabling "
2546 "adapter.\n", dev->name);
2547 /* TODO: schedule adapter shutdown */
2548 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2551 /* Update the RDB entry */
2552 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2555 #ifdef CONFIG_IPW2100_MONITOR
2557 static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
2558 struct libipw_rx_stats *stats)
2560 struct net_device *dev = priv->net_dev;
2561 struct ipw2100_status *status = &priv->status_queue.drv[i];
2562 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2564 /* Magic struct that slots into the radiotap header -- no reason
2565 * to build this manually element by element, we can write it much
2566 * more efficiently than we can parse it. ORDER MATTERS HERE */
2567 struct ipw_rt_hdr {
2568 struct ieee80211_radiotap_header rt_hdr;
2569 s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
2570 } *ipw_rt;
2572 IPW_DEBUG_RX("Handler...\n");
2574 if (unlikely(status->frame_size > skb_tailroom(packet->skb) -
2575 sizeof(struct ipw_rt_hdr))) {
2576 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2577 " Dropping.\n",
2578 dev->name,
2579 status->frame_size,
2580 skb_tailroom(packet->skb));
2581 dev->stats.rx_errors++;
2582 return;
2585 if (unlikely(!netif_running(dev))) {
2586 dev->stats.rx_errors++;
2587 priv->wstats.discard.misc++;
2588 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2589 return;
2592 if (unlikely(priv->config & CFG_CRC_CHECK &&
2593 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2594 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2595 dev->stats.rx_errors++;
2596 return;
2599 pci_unmap_single(priv->pci_dev, packet->dma_addr,
2600 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2601 memmove(packet->skb->data + sizeof(struct ipw_rt_hdr),
2602 packet->skb->data, status->frame_size);
2604 ipw_rt = (struct ipw_rt_hdr *) packet->skb->data;
2606 ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
2607 ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
2608 ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */
2610 ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
2612 ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM;
2614 skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
2616 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2617 dev->stats.rx_errors++;
2619 /* libipw_rx failed, so it didn't free the SKB */
2620 dev_kfree_skb_any(packet->skb);
2621 packet->skb = NULL;
2624 /* We need to allocate a new SKB and attach it to the RDB. */
2625 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2626 IPW_DEBUG_WARNING(
2627 "%s: Unable to allocate SKB onto RBD ring - disabling "
2628 "adapter.\n", dev->name);
2629 /* TODO: schedule adapter shutdown */
2630 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2633 /* Update the RDB entry */
2634 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2637 #endif
2639 static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2641 struct ipw2100_status *status = &priv->status_queue.drv[i];
2642 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2643 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2645 switch (frame_type) {
2646 case COMMAND_STATUS_VAL:
2647 return (status->frame_size != sizeof(u->rx_data.command));
2648 case STATUS_CHANGE_VAL:
2649 return (status->frame_size != sizeof(u->rx_data.status));
2650 case HOST_NOTIFICATION_VAL:
2651 return (status->frame_size < sizeof(u->rx_data.notification));
2652 case P80211_DATA_VAL:
2653 case P8023_DATA_VAL:
2654 #ifdef CONFIG_IPW2100_MONITOR
2655 return 0;
2656 #else
2657 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2658 case IEEE80211_FTYPE_MGMT:
2659 case IEEE80211_FTYPE_CTL:
2660 return 0;
2661 case IEEE80211_FTYPE_DATA:
2662 return (status->frame_size >
2663 IPW_MAX_802_11_PAYLOAD_LENGTH);
2665 #endif
2668 return 1;
2672 * ipw2100 interrupts are disabled at this point, and the ISR
2673 * is the only code that calls this method. So, we do not need
2674 * to play with any locks.
2676 * RX Queue works as follows:
2678 * Read index - firmware places packet in entry identified by the
2679 * Read index and advances Read index. In this manner,
2680 * Read index will always point to the next packet to
2681 * be filled--but not yet valid.
2683 * Write index - driver fills this entry with an unused RBD entry.
2684 * This entry has not filled by the firmware yet.
2686 * In between the W and R indexes are the RBDs that have been received
2687 * but not yet processed.
2689 * The process of handling packets will start at WRITE + 1 and advance
2690 * until it reaches the READ index.
2692 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2695 static void __ipw2100_rx_process(struct ipw2100_priv *priv)
2697 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2698 struct ipw2100_status_queue *sq = &priv->status_queue;
2699 struct ipw2100_rx_packet *packet;
2700 u16 frame_type;
2701 u32 r, w, i, s;
2702 struct ipw2100_rx *u;
2703 struct libipw_rx_stats stats = {
2704 .mac_time = jiffies,
2707 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2708 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2710 if (r >= rxq->entries) {
2711 IPW_DEBUG_RX("exit - bad read index\n");
2712 return;
2715 i = (rxq->next + 1) % rxq->entries;
2716 s = i;
2717 while (i != r) {
2718 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2719 r, rxq->next, i); */
2721 packet = &priv->rx_buffers[i];
2723 /* Sync the DMA for the RX buffer so CPU is sure to get
2724 * the correct values */
2725 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2726 sizeof(struct ipw2100_rx),
2727 PCI_DMA_FROMDEVICE);
2729 if (unlikely(ipw2100_corruption_check(priv, i))) {
2730 ipw2100_corruption_detected(priv, i);
2731 goto increment;
2734 u = packet->rxp;
2735 frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
2736 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2737 stats.len = sq->drv[i].frame_size;
2739 stats.mask = 0;
2740 if (stats.rssi != 0)
2741 stats.mask |= LIBIPW_STATMASK_RSSI;
2742 stats.freq = LIBIPW_24GHZ_BAND;
2744 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2745 priv->net_dev->name, frame_types[frame_type],
2746 stats.len);
2748 switch (frame_type) {
2749 case COMMAND_STATUS_VAL:
2750 /* Reset Rx watchdog */
2751 isr_rx_complete_command(priv, &u->rx_data.command);
2752 break;
2754 case STATUS_CHANGE_VAL:
2755 isr_status_change(priv, u->rx_data.status);
2756 break;
2758 case P80211_DATA_VAL:
2759 case P8023_DATA_VAL:
2760 #ifdef CONFIG_IPW2100_MONITOR
2761 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2762 isr_rx_monitor(priv, i, &stats);
2763 break;
2765 #endif
2766 if (stats.len < sizeof(struct libipw_hdr_3addr))
2767 break;
2768 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2769 case IEEE80211_FTYPE_MGMT:
2770 libipw_rx_mgt(priv->ieee,
2771 &u->rx_data.header, &stats);
2772 break;
2774 case IEEE80211_FTYPE_CTL:
2775 break;
2777 case IEEE80211_FTYPE_DATA:
2778 isr_rx(priv, i, &stats);
2779 break;
2782 break;
2785 increment:
2786 /* clear status field associated with this RBD */
2787 rxq->drv[i].status.info.field = 0;
2789 i = (i + 1) % rxq->entries;
2792 if (i != s) {
2793 /* backtrack one entry, wrapping to end if at 0 */
2794 rxq->next = (i ? i : rxq->entries) - 1;
2796 write_register(priv->net_dev,
2797 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
2802 * __ipw2100_tx_process
2804 * This routine will determine whether the next packet on
2805 * the fw_pend_list has been processed by the firmware yet.
2807 * If not, then it does nothing and returns.
2809 * If so, then it removes the item from the fw_pend_list, frees
2810 * any associated storage, and places the item back on the
2811 * free list of its source (either msg_free_list or tx_free_list)
2813 * TX Queue works as follows:
2815 * Read index - points to the next TBD that the firmware will
2816 * process. The firmware will read the data, and once
2817 * done processing, it will advance the Read index.
2819 * Write index - driver fills this entry with an constructed TBD
2820 * entry. The Write index is not advanced until the
2821 * packet has been configured.
2823 * In between the W and R indexes are the TBDs that have NOT been
2824 * processed. Lagging behind the R index are packets that have
2825 * been processed but have not been freed by the driver.
2827 * In order to free old storage, an internal index will be maintained
2828 * that points to the next packet to be freed. When all used
2829 * packets have been freed, the oldest index will be the same as the
2830 * firmware's read index.
2832 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2834 * Because the TBD structure can not contain arbitrary data, the
2835 * driver must keep an internal queue of cached allocations such that
2836 * it can put that data back into the tx_free_list and msg_free_list
2837 * for use by future command and data packets.
2840 static int __ipw2100_tx_process(struct ipw2100_priv *priv)
2842 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2843 struct ipw2100_bd *tbd;
2844 struct list_head *element;
2845 struct ipw2100_tx_packet *packet;
2846 int descriptors_used;
2847 int e, i;
2848 u32 r, w, frag_num = 0;
2850 if (list_empty(&priv->fw_pend_list))
2851 return 0;
2853 element = priv->fw_pend_list.next;
2855 packet = list_entry(element, struct ipw2100_tx_packet, list);
2856 tbd = &txq->drv[packet->index];
2858 /* Determine how many TBD entries must be finished... */
2859 switch (packet->type) {
2860 case COMMAND:
2861 /* COMMAND uses only one slot; don't advance */
2862 descriptors_used = 1;
2863 e = txq->oldest;
2864 break;
2866 case DATA:
2867 /* DATA uses two slots; advance and loop position. */
2868 descriptors_used = tbd->num_fragments;
2869 frag_num = tbd->num_fragments - 1;
2870 e = txq->oldest + frag_num;
2871 e %= txq->entries;
2872 break;
2874 default:
2875 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2876 priv->net_dev->name);
2877 return 0;
2880 /* if the last TBD is not done by NIC yet, then packet is
2881 * not ready to be released.
2884 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2885 &r);
2886 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2887 &w);
2888 if (w != txq->next)
2889 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2890 priv->net_dev->name);
2893 * txq->next is the index of the last packet written txq->oldest is
2894 * the index of the r is the index of the next packet to be read by
2895 * firmware
2899 * Quick graphic to help you visualize the following
2900 * if / else statement
2902 * ===>| s---->|===============
2903 * e>|
2904 * | a | b | c | d | e | f | g | h | i | j | k | l
2905 * r---->|
2908 * w - updated by driver
2909 * r - updated by firmware
2910 * s - start of oldest BD entry (txq->oldest)
2911 * e - end of oldest BD entry
2914 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2915 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2916 return 0;
2919 list_del(element);
2920 DEC_STAT(&priv->fw_pend_stat);
2922 #ifdef CONFIG_IPW2100_DEBUG
2924 i = txq->oldest;
2925 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2926 &txq->drv[i],
2927 (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
2928 txq->drv[i].host_addr, txq->drv[i].buf_length);
2930 if (packet->type == DATA) {
2931 i = (i + 1) % txq->entries;
2933 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2934 &txq->drv[i],
2935 (u32) (txq->nic + i *
2936 sizeof(struct ipw2100_bd)),
2937 (u32) txq->drv[i].host_addr,
2938 txq->drv[i].buf_length);
2941 #endif
2943 switch (packet->type) {
2944 case DATA:
2945 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2946 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2947 "Expecting DATA TBD but pulled "
2948 "something else: ids %d=%d.\n",
2949 priv->net_dev->name, txq->oldest, packet->index);
2951 /* DATA packet; we have to unmap and free the SKB */
2952 for (i = 0; i < frag_num; i++) {
2953 tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
2955 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2956 (packet->index + 1 + i) % txq->entries,
2957 tbd->host_addr, tbd->buf_length);
2959 pci_unmap_single(priv->pci_dev,
2960 tbd->host_addr,
2961 tbd->buf_length, PCI_DMA_TODEVICE);
2964 libipw_txb_free(packet->info.d_struct.txb);
2965 packet->info.d_struct.txb = NULL;
2967 list_add_tail(element, &priv->tx_free_list);
2968 INC_STAT(&priv->tx_free_stat);
2970 /* We have a free slot in the Tx queue, so wake up the
2971 * transmit layer if it is stopped. */
2972 if (priv->status & STATUS_ASSOCIATED)
2973 netif_wake_queue(priv->net_dev);
2975 /* A packet was processed by the hardware, so update the
2976 * watchdog */
2977 priv->net_dev->trans_start = jiffies;
2979 break;
2981 case COMMAND:
2982 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2983 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2984 "Expecting COMMAND TBD but pulled "
2985 "something else: ids %d=%d.\n",
2986 priv->net_dev->name, txq->oldest, packet->index);
2988 #ifdef CONFIG_IPW2100_DEBUG
2989 if (packet->info.c_struct.cmd->host_command_reg <
2990 ARRAY_SIZE(command_types))
2991 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2992 command_types[packet->info.c_struct.cmd->
2993 host_command_reg],
2994 packet->info.c_struct.cmd->
2995 host_command_reg,
2996 packet->info.c_struct.cmd->cmd_status_reg);
2997 #endif
2999 list_add_tail(element, &priv->msg_free_list);
3000 INC_STAT(&priv->msg_free_stat);
3001 break;
3004 /* advance oldest used TBD pointer to start of next entry */
3005 txq->oldest = (e + 1) % txq->entries;
3006 /* increase available TBDs number */
3007 txq->available += descriptors_used;
3008 SET_STAT(&priv->txq_stat, txq->available);
3010 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3011 jiffies - packet->jiffy_start);
3013 return (!list_empty(&priv->fw_pend_list));
3016 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
3018 int i = 0;
3020 while (__ipw2100_tx_process(priv) && i < 200)
3021 i++;
3023 if (i == 200) {
3024 printk(KERN_WARNING DRV_NAME ": "
3025 "%s: Driver is running slow (%d iters).\n",
3026 priv->net_dev->name, i);
3030 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
3032 struct list_head *element;
3033 struct ipw2100_tx_packet *packet;
3034 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3035 struct ipw2100_bd *tbd;
3036 int next = txq->next;
3038 while (!list_empty(&priv->msg_pend_list)) {
3039 /* if there isn't enough space in TBD queue, then
3040 * don't stuff a new one in.
3041 * NOTE: 3 are needed as a command will take one,
3042 * and there is a minimum of 2 that must be
3043 * maintained between the r and w indexes
3045 if (txq->available <= 3) {
3046 IPW_DEBUG_TX("no room in tx_queue\n");
3047 break;
3050 element = priv->msg_pend_list.next;
3051 list_del(element);
3052 DEC_STAT(&priv->msg_pend_stat);
3054 packet = list_entry(element, struct ipw2100_tx_packet, list);
3056 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3057 &txq->drv[txq->next],
3058 (u32) (txq->nic + txq->next *
3059 sizeof(struct ipw2100_bd)));
3061 packet->index = txq->next;
3063 tbd = &txq->drv[txq->next];
3065 /* initialize TBD */
3066 tbd->host_addr = packet->info.c_struct.cmd_phys;
3067 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
3068 /* not marking number of fragments causes problems
3069 * with f/w debug version */
3070 tbd->num_fragments = 1;
3071 tbd->status.info.field =
3072 IPW_BD_STATUS_TX_FRAME_COMMAND |
3073 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3075 /* update TBD queue counters */
3076 txq->next++;
3077 txq->next %= txq->entries;
3078 txq->available--;
3079 DEC_STAT(&priv->txq_stat);
3081 list_add_tail(element, &priv->fw_pend_list);
3082 INC_STAT(&priv->fw_pend_stat);
3085 if (txq->next != next) {
3086 /* kick off the DMA by notifying firmware the
3087 * write index has moved; make sure TBD stores are sync'd */
3088 wmb();
3089 write_register(priv->net_dev,
3090 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3091 txq->next);
3096 * ipw2100_tx_send_data
3099 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
3101 struct list_head *element;
3102 struct ipw2100_tx_packet *packet;
3103 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3104 struct ipw2100_bd *tbd;
3105 int next = txq->next;
3106 int i = 0;
3107 struct ipw2100_data_header *ipw_hdr;
3108 struct libipw_hdr_3addr *hdr;
3110 while (!list_empty(&priv->tx_pend_list)) {
3111 /* if there isn't enough space in TBD queue, then
3112 * don't stuff a new one in.
3113 * NOTE: 4 are needed as a data will take two,
3114 * and there is a minimum of 2 that must be
3115 * maintained between the r and w indexes
3117 element = priv->tx_pend_list.next;
3118 packet = list_entry(element, struct ipw2100_tx_packet, list);
3120 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
3121 IPW_MAX_BDS)) {
3122 /* TODO: Support merging buffers if more than
3123 * IPW_MAX_BDS are used */
3124 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3125 "Increase fragmentation level.\n",
3126 priv->net_dev->name);
3129 if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
3130 IPW_DEBUG_TX("no room in tx_queue\n");
3131 break;
3134 list_del(element);
3135 DEC_STAT(&priv->tx_pend_stat);
3137 tbd = &txq->drv[txq->next];
3139 packet->index = txq->next;
3141 ipw_hdr = packet->info.d_struct.data;
3142 hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb->
3143 fragments[0]->data;
3145 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
3146 /* To DS: Addr1 = BSSID, Addr2 = SA,
3147 Addr3 = DA */
3148 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3149 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
3150 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
3151 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3152 Addr3 = BSSID */
3153 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3154 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
3157 ipw_hdr->host_command_reg = SEND;
3158 ipw_hdr->host_command_reg1 = 0;
3160 /* For now we only support host based encryption */
3161 ipw_hdr->needs_encryption = 0;
3162 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
3163 if (packet->info.d_struct.txb->nr_frags > 1)
3164 ipw_hdr->fragment_size =
3165 packet->info.d_struct.txb->frag_size -
3166 LIBIPW_3ADDR_LEN;
3167 else
3168 ipw_hdr->fragment_size = 0;
3170 tbd->host_addr = packet->info.d_struct.data_phys;
3171 tbd->buf_length = sizeof(struct ipw2100_data_header);
3172 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
3173 tbd->status.info.field =
3174 IPW_BD_STATUS_TX_FRAME_802_3 |
3175 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3176 txq->next++;
3177 txq->next %= txq->entries;
3179 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3180 packet->index, tbd->host_addr, tbd->buf_length);
3181 #ifdef CONFIG_IPW2100_DEBUG
3182 if (packet->info.d_struct.txb->nr_frags > 1)
3183 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3184 packet->info.d_struct.txb->nr_frags);
3185 #endif
3187 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
3188 tbd = &txq->drv[txq->next];
3189 if (i == packet->info.d_struct.txb->nr_frags - 1)
3190 tbd->status.info.field =
3191 IPW_BD_STATUS_TX_FRAME_802_3 |
3192 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3193 else
3194 tbd->status.info.field =
3195 IPW_BD_STATUS_TX_FRAME_802_3 |
3196 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3198 tbd->buf_length = packet->info.d_struct.txb->
3199 fragments[i]->len - LIBIPW_3ADDR_LEN;
3201 tbd->host_addr = pci_map_single(priv->pci_dev,
3202 packet->info.d_struct.
3203 txb->fragments[i]->
3204 data +
3205 LIBIPW_3ADDR_LEN,
3206 tbd->buf_length,
3207 PCI_DMA_TODEVICE);
3209 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3210 txq->next, tbd->host_addr,
3211 tbd->buf_length);
3213 pci_dma_sync_single_for_device(priv->pci_dev,
3214 tbd->host_addr,
3215 tbd->buf_length,
3216 PCI_DMA_TODEVICE);
3218 txq->next++;
3219 txq->next %= txq->entries;
3222 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3223 SET_STAT(&priv->txq_stat, txq->available);
3225 list_add_tail(element, &priv->fw_pend_list);
3226 INC_STAT(&priv->fw_pend_stat);
3229 if (txq->next != next) {
3230 /* kick off the DMA by notifying firmware the
3231 * write index has moved; make sure TBD stores are sync'd */
3232 write_register(priv->net_dev,
3233 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3234 txq->next);
3238 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3240 struct net_device *dev = priv->net_dev;
3241 unsigned long flags;
3242 u32 inta, tmp;
3244 spin_lock_irqsave(&priv->low_lock, flags);
3245 ipw2100_disable_interrupts(priv);
3247 read_register(dev, IPW_REG_INTA, &inta);
3249 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3250 (unsigned long)inta & IPW_INTERRUPT_MASK);
3252 priv->in_isr++;
3253 priv->interrupts++;
3255 /* We do not loop and keep polling for more interrupts as this
3256 * is frowned upon and doesn't play nicely with other potentially
3257 * chained IRQs */
3258 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3259 (unsigned long)inta & IPW_INTERRUPT_MASK);
3261 if (inta & IPW2100_INTA_FATAL_ERROR) {
3262 printk(KERN_WARNING DRV_NAME
3263 ": Fatal interrupt. Scheduling firmware restart.\n");
3264 priv->inta_other++;
3265 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
3267 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3268 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3269 priv->net_dev->name, priv->fatal_error);
3271 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3272 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3273 priv->net_dev->name, tmp);
3275 /* Wake up any sleeping jobs */
3276 schedule_reset(priv);
3279 if (inta & IPW2100_INTA_PARITY_ERROR) {
3280 printk(KERN_ERR DRV_NAME
3281 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3282 priv->inta_other++;
3283 write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
3286 if (inta & IPW2100_INTA_RX_TRANSFER) {
3287 IPW_DEBUG_ISR("RX interrupt\n");
3289 priv->rx_interrupts++;
3291 write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
3293 __ipw2100_rx_process(priv);
3294 __ipw2100_tx_complete(priv);
3297 if (inta & IPW2100_INTA_TX_TRANSFER) {
3298 IPW_DEBUG_ISR("TX interrupt\n");
3300 priv->tx_interrupts++;
3302 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
3304 __ipw2100_tx_complete(priv);
3305 ipw2100_tx_send_commands(priv);
3306 ipw2100_tx_send_data(priv);
3309 if (inta & IPW2100_INTA_TX_COMPLETE) {
3310 IPW_DEBUG_ISR("TX complete\n");
3311 priv->inta_other++;
3312 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
3314 __ipw2100_tx_complete(priv);
3317 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3318 /* ipw2100_handle_event(dev); */
3319 priv->inta_other++;
3320 write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
3323 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3324 IPW_DEBUG_ISR("FW init done interrupt\n");
3325 priv->inta_other++;
3327 read_register(dev, IPW_REG_INTA, &tmp);
3328 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3329 IPW2100_INTA_PARITY_ERROR)) {
3330 write_register(dev, IPW_REG_INTA,
3331 IPW2100_INTA_FATAL_ERROR |
3332 IPW2100_INTA_PARITY_ERROR);
3335 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
3338 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3339 IPW_DEBUG_ISR("Status change interrupt\n");
3340 priv->inta_other++;
3341 write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
3344 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3345 IPW_DEBUG_ISR("slave host mode interrupt\n");
3346 priv->inta_other++;
3347 write_register(dev, IPW_REG_INTA,
3348 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3351 priv->in_isr--;
3352 ipw2100_enable_interrupts(priv);
3354 spin_unlock_irqrestore(&priv->low_lock, flags);
3356 IPW_DEBUG_ISR("exit\n");
3359 static irqreturn_t ipw2100_interrupt(int irq, void *data)
3361 struct ipw2100_priv *priv = data;
3362 u32 inta, inta_mask;
3364 if (!data)
3365 return IRQ_NONE;
3367 spin_lock(&priv->low_lock);
3369 /* We check to see if we should be ignoring interrupts before
3370 * we touch the hardware. During ucode load if we try and handle
3371 * an interrupt we can cause keyboard problems as well as cause
3372 * the ucode to fail to initialize */
3373 if (!(priv->status & STATUS_INT_ENABLED)) {
3374 /* Shared IRQ */
3375 goto none;
3378 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3379 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3381 if (inta == 0xFFFFFFFF) {
3382 /* Hardware disappeared */
3383 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3384 goto none;
3387 inta &= IPW_INTERRUPT_MASK;
3389 if (!(inta & inta_mask)) {
3390 /* Shared interrupt */
3391 goto none;
3394 /* We disable the hardware interrupt here just to prevent unneeded
3395 * calls to be made. We disable this again within the actual
3396 * work tasklet, so if another part of the code re-enables the
3397 * interrupt, that is fine */
3398 ipw2100_disable_interrupts(priv);
3400 tasklet_schedule(&priv->irq_tasklet);
3401 spin_unlock(&priv->low_lock);
3403 return IRQ_HANDLED;
3404 none:
3405 spin_unlock(&priv->low_lock);
3406 return IRQ_NONE;
3409 static netdev_tx_t ipw2100_tx(struct libipw_txb *txb,
3410 struct net_device *dev, int pri)
3412 struct ipw2100_priv *priv = libipw_priv(dev);
3413 struct list_head *element;
3414 struct ipw2100_tx_packet *packet;
3415 unsigned long flags;
3417 spin_lock_irqsave(&priv->low_lock, flags);
3419 if (!(priv->status & STATUS_ASSOCIATED)) {
3420 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3421 priv->net_dev->stats.tx_carrier_errors++;
3422 netif_stop_queue(dev);
3423 goto fail_unlock;
3426 if (list_empty(&priv->tx_free_list))
3427 goto fail_unlock;
3429 element = priv->tx_free_list.next;
3430 packet = list_entry(element, struct ipw2100_tx_packet, list);
3432 packet->info.d_struct.txb = txb;
3434 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
3435 printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
3437 packet->jiffy_start = jiffies;
3439 list_del(element);
3440 DEC_STAT(&priv->tx_free_stat);
3442 list_add_tail(element, &priv->tx_pend_list);
3443 INC_STAT(&priv->tx_pend_stat);
3445 ipw2100_tx_send_data(priv);
3447 spin_unlock_irqrestore(&priv->low_lock, flags);
3448 return NETDEV_TX_OK;
3450 fail_unlock:
3451 netif_stop_queue(dev);
3452 spin_unlock_irqrestore(&priv->low_lock, flags);
3453 return NETDEV_TX_BUSY;
3456 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3458 int i, j, err = -EINVAL;
3459 void *v;
3460 dma_addr_t p;
3462 priv->msg_buffers =
3463 kmalloc(IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
3464 GFP_KERNEL);
3465 if (!priv->msg_buffers) {
3466 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
3467 "buffers.\n", priv->net_dev->name);
3468 return -ENOMEM;
3471 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3472 v = pci_alloc_consistent(priv->pci_dev,
3473 sizeof(struct ipw2100_cmd_header), &p);
3474 if (!v) {
3475 printk(KERN_ERR DRV_NAME ": "
3476 "%s: PCI alloc failed for msg "
3477 "buffers.\n", priv->net_dev->name);
3478 err = -ENOMEM;
3479 break;
3482 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3484 priv->msg_buffers[i].type = COMMAND;
3485 priv->msg_buffers[i].info.c_struct.cmd =
3486 (struct ipw2100_cmd_header *)v;
3487 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3490 if (i == IPW_COMMAND_POOL_SIZE)
3491 return 0;
3493 for (j = 0; j < i; j++) {
3494 pci_free_consistent(priv->pci_dev,
3495 sizeof(struct ipw2100_cmd_header),
3496 priv->msg_buffers[j].info.c_struct.cmd,
3497 priv->msg_buffers[j].info.c_struct.
3498 cmd_phys);
3501 kfree(priv->msg_buffers);
3502 priv->msg_buffers = NULL;
3504 return err;
3507 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3509 int i;
3511 INIT_LIST_HEAD(&priv->msg_free_list);
3512 INIT_LIST_HEAD(&priv->msg_pend_list);
3514 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3515 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3516 SET_STAT(&priv->msg_free_stat, i);
3518 return 0;
3521 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3523 int i;
3525 if (!priv->msg_buffers)
3526 return;
3528 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3529 pci_free_consistent(priv->pci_dev,
3530 sizeof(struct ipw2100_cmd_header),
3531 priv->msg_buffers[i].info.c_struct.cmd,
3532 priv->msg_buffers[i].info.c_struct.
3533 cmd_phys);
3536 kfree(priv->msg_buffers);
3537 priv->msg_buffers = NULL;
3540 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3541 char *buf)
3543 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3544 char *out = buf;
3545 int i, j;
3546 u32 val;
3548 for (i = 0; i < 16; i++) {
3549 out += sprintf(out, "[%08X] ", i * 16);
3550 for (j = 0; j < 16; j += 4) {
3551 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3552 out += sprintf(out, "%08X ", val);
3554 out += sprintf(out, "\n");
3557 return out - buf;
3560 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3562 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3563 char *buf)
3565 struct ipw2100_priv *p = dev_get_drvdata(d);
3566 return sprintf(buf, "0x%08x\n", (int)p->config);
3569 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3571 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3572 char *buf)
3574 struct ipw2100_priv *p = dev_get_drvdata(d);
3575 return sprintf(buf, "0x%08x\n", (int)p->status);
3578 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3580 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3581 char *buf)
3583 struct ipw2100_priv *p = dev_get_drvdata(d);
3584 return sprintf(buf, "0x%08x\n", (int)p->capability);
3587 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3589 #define IPW2100_REG(x) { IPW_ ##x, #x }
3590 static const struct {
3591 u32 addr;
3592 const char *name;
3593 } hw_data[] = {
3594 IPW2100_REG(REG_GP_CNTRL),
3595 IPW2100_REG(REG_GPIO),
3596 IPW2100_REG(REG_INTA),
3597 IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
3598 #define IPW2100_NIC(x, s) { x, #x, s }
3599 static const struct {
3600 u32 addr;
3601 const char *name;
3602 size_t size;
3603 } nic_data[] = {
3604 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3605 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3606 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3607 static const struct {
3608 u8 index;
3609 const char *name;
3610 const char *desc;
3611 } ord_data[] = {
3612 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3613 IPW2100_ORD(STAT_TX_HOST_COMPLETE,
3614 "successful Host Tx's (MSDU)"),
3615 IPW2100_ORD(STAT_TX_DIR_DATA,
3616 "successful Directed Tx's (MSDU)"),
3617 IPW2100_ORD(STAT_TX_DIR_DATA1,
3618 "successful Directed Tx's (MSDU) @ 1MB"),
3619 IPW2100_ORD(STAT_TX_DIR_DATA2,
3620 "successful Directed Tx's (MSDU) @ 2MB"),
3621 IPW2100_ORD(STAT_TX_DIR_DATA5_5,
3622 "successful Directed Tx's (MSDU) @ 5_5MB"),
3623 IPW2100_ORD(STAT_TX_DIR_DATA11,
3624 "successful Directed Tx's (MSDU) @ 11MB"),
3625 IPW2100_ORD(STAT_TX_NODIR_DATA1,
3626 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3627 IPW2100_ORD(STAT_TX_NODIR_DATA2,
3628 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3629 IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
3630 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3631 IPW2100_ORD(STAT_TX_NODIR_DATA11,
3632 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3633 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3634 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3635 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3636 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3637 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3638 IPW2100_ORD(STAT_TX_ASSN_RESP,
3639 "successful Association response Tx's"),
3640 IPW2100_ORD(STAT_TX_REASSN,
3641 "successful Reassociation Tx's"),
3642 IPW2100_ORD(STAT_TX_REASSN_RESP,
3643 "successful Reassociation response Tx's"),
3644 IPW2100_ORD(STAT_TX_PROBE,
3645 "probes successfully transmitted"),
3646 IPW2100_ORD(STAT_TX_PROBE_RESP,
3647 "probe responses successfully transmitted"),
3648 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3649 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3650 IPW2100_ORD(STAT_TX_DISASSN,
3651 "successful Disassociation TX"),
3652 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3653 IPW2100_ORD(STAT_TX_DEAUTH,
3654 "successful Deauthentication TX"),
3655 IPW2100_ORD(STAT_TX_TOTAL_BYTES,
3656 "Total successful Tx data bytes"),
3657 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3658 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3659 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3660 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3661 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3662 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3663 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
3664 "times max tries in a hop failed"),
3665 IPW2100_ORD(STAT_TX_DISASSN_FAIL,
3666 "times disassociation failed"),
3667 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3668 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3669 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3670 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3671 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3672 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3673 IPW2100_ORD(STAT_RX_DIR_DATA5_5,
3674 "directed packets at 5.5MB"),
3675 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3676 IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
3677 IPW2100_ORD(STAT_RX_NODIR_DATA1,
3678 "nondirected packets at 1MB"),
3679 IPW2100_ORD(STAT_RX_NODIR_DATA2,
3680 "nondirected packets at 2MB"),
3681 IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
3682 "nondirected packets at 5.5MB"),
3683 IPW2100_ORD(STAT_RX_NODIR_DATA11,
3684 "nondirected packets at 11MB"),
3685 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3686 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
3687 "Rx CTS"),
3688 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3689 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3690 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3691 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3692 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3693 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3694 IPW2100_ORD(STAT_RX_REASSN_RESP,
3695 "Reassociation response Rx's"),
3696 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3697 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3698 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3699 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3700 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3701 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3702 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3703 IPW2100_ORD(STAT_RX_TOTAL_BYTES,
3704 "Total rx data bytes received"),
3705 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3706 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3707 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3708 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3709 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3710 IPW2100_ORD(STAT_RX_DUPLICATE1,
3711 "duplicate rx packets at 1MB"),
3712 IPW2100_ORD(STAT_RX_DUPLICATE2,
3713 "duplicate rx packets at 2MB"),
3714 IPW2100_ORD(STAT_RX_DUPLICATE5_5,
3715 "duplicate rx packets at 5.5MB"),
3716 IPW2100_ORD(STAT_RX_DUPLICATE11,
3717 "duplicate rx packets at 11MB"),
3718 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3719 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3720 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3721 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3722 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
3723 "rx frames with invalid protocol"),
3724 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3725 IPW2100_ORD(STAT_RX_NO_BUFFER,
3726 "rx frames rejected due to no buffer"),
3727 IPW2100_ORD(STAT_RX_MISSING_FRAG,
3728 "rx frames dropped due to missing fragment"),
3729 IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
3730 "rx frames dropped due to non-sequential fragment"),
3731 IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
3732 "rx frames dropped due to unmatched 1st frame"),
3733 IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
3734 "rx frames dropped due to uncompleted frame"),
3735 IPW2100_ORD(STAT_RX_ICV_ERRORS,
3736 "ICV errors during decryption"),
3737 IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
3738 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3739 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
3740 "poll response timeouts"),
3741 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
3742 "timeouts waiting for last {broad,multi}cast pkt"),
3743 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3744 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3745 IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
3746 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3747 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
3748 "current calculation of % missed beacons"),
3749 IPW2100_ORD(STAT_PERCENT_RETRIES,
3750 "current calculation of % missed tx retries"),
3751 IPW2100_ORD(ASSOCIATED_AP_PTR,
3752 "0 if not associated, else pointer to AP table entry"),
3753 IPW2100_ORD(AVAILABLE_AP_CNT,
3754 "AP's decsribed in the AP table"),
3755 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3756 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3757 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3758 IPW2100_ORD(STAT_ASSN_RESP_FAIL,
3759 "failures due to response fail"),
3760 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3761 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3762 IPW2100_ORD(STAT_ROAM_INHIBIT,
3763 "times roaming was inhibited due to activity"),
3764 IPW2100_ORD(RSSI_AT_ASSN,
3765 "RSSI of associated AP at time of association"),
3766 IPW2100_ORD(STAT_ASSN_CAUSE1,
3767 "reassociation: no probe response or TX on hop"),
3768 IPW2100_ORD(STAT_ASSN_CAUSE2,
3769 "reassociation: poor tx/rx quality"),
3770 IPW2100_ORD(STAT_ASSN_CAUSE3,
3771 "reassociation: tx/rx quality (excessive AP load"),
3772 IPW2100_ORD(STAT_ASSN_CAUSE4,
3773 "reassociation: AP RSSI level"),
3774 IPW2100_ORD(STAT_ASSN_CAUSE5,
3775 "reassociations due to load leveling"),
3776 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3777 IPW2100_ORD(STAT_AUTH_RESP_FAIL,
3778 "times authentication response failed"),
3779 IPW2100_ORD(STATION_TABLE_CNT,
3780 "entries in association table"),
3781 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3782 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3783 IPW2100_ORD(COUNTRY_CODE,
3784 "IEEE country code as recv'd from beacon"),
3785 IPW2100_ORD(COUNTRY_CHANNELS,
3786 "channels suported by country"),
3787 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3788 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3789 IPW2100_ORD(ANTENNA_DIVERSITY,
3790 "TRUE if antenna diversity is disabled"),
3791 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3792 IPW2100_ORD(OUR_FREQ,
3793 "current radio freq lower digits - channel ID"),
3794 IPW2100_ORD(RTC_TIME, "current RTC time"),
3795 IPW2100_ORD(PORT_TYPE, "operating mode"),
3796 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3797 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3798 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3799 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3800 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3801 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3802 IPW2100_ORD(CAPABILITIES,
3803 "Management frame capability field"),
3804 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3805 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3806 IPW2100_ORD(RTS_THRESHOLD,
3807 "Min packet length for RTS handshaking"),
3808 IPW2100_ORD(INT_MODE, "International mode"),
3809 IPW2100_ORD(FRAGMENTATION_THRESHOLD,
3810 "protocol frag threshold"),
3811 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
3812 "EEPROM offset in SRAM"),
3813 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
3814 "EEPROM size in SRAM"),
3815 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3816 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
3817 "EEPROM IBSS 11b channel set"),
3818 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3819 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3820 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3821 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3822 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
3824 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3825 char *buf)
3827 int i;
3828 struct ipw2100_priv *priv = dev_get_drvdata(d);
3829 struct net_device *dev = priv->net_dev;
3830 char *out = buf;
3831 u32 val = 0;
3833 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3835 for (i = 0; i < ARRAY_SIZE(hw_data); i++) {
3836 read_register(dev, hw_data[i].addr, &val);
3837 out += sprintf(out, "%30s [%08X] : %08X\n",
3838 hw_data[i].name, hw_data[i].addr, val);
3841 return out - buf;
3844 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3846 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3847 char *buf)
3849 struct ipw2100_priv *priv = dev_get_drvdata(d);
3850 struct net_device *dev = priv->net_dev;
3851 char *out = buf;
3852 int i;
3854 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3856 for (i = 0; i < ARRAY_SIZE(nic_data); i++) {
3857 u8 tmp8;
3858 u16 tmp16;
3859 u32 tmp32;
3861 switch (nic_data[i].size) {
3862 case 1:
3863 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3864 out += sprintf(out, "%30s [%08X] : %02X\n",
3865 nic_data[i].name, nic_data[i].addr,
3866 tmp8);
3867 break;
3868 case 2:
3869 read_nic_word(dev, nic_data[i].addr, &tmp16);
3870 out += sprintf(out, "%30s [%08X] : %04X\n",
3871 nic_data[i].name, nic_data[i].addr,
3872 tmp16);
3873 break;
3874 case 4:
3875 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3876 out += sprintf(out, "%30s [%08X] : %08X\n",
3877 nic_data[i].name, nic_data[i].addr,
3878 tmp32);
3879 break;
3882 return out - buf;
3885 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3887 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3888 char *buf)
3890 struct ipw2100_priv *priv = dev_get_drvdata(d);
3891 struct net_device *dev = priv->net_dev;
3892 static unsigned long loop = 0;
3893 int len = 0;
3894 u32 buffer[4];
3895 int i;
3896 char line[81];
3898 if (loop >= 0x30000)
3899 loop = 0;
3901 /* sysfs provides us PAGE_SIZE buffer */
3902 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3904 if (priv->snapshot[0])
3905 for (i = 0; i < 4; i++)
3906 buffer[i] =
3907 *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
3908 else
3909 for (i = 0; i < 4; i++)
3910 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3912 if (priv->dump_raw)
3913 len += sprintf(buf + len,
3914 "%c%c%c%c"
3915 "%c%c%c%c"
3916 "%c%c%c%c"
3917 "%c%c%c%c",
3918 ((u8 *) buffer)[0x0],
3919 ((u8 *) buffer)[0x1],
3920 ((u8 *) buffer)[0x2],
3921 ((u8 *) buffer)[0x3],
3922 ((u8 *) buffer)[0x4],
3923 ((u8 *) buffer)[0x5],
3924 ((u8 *) buffer)[0x6],
3925 ((u8 *) buffer)[0x7],
3926 ((u8 *) buffer)[0x8],
3927 ((u8 *) buffer)[0x9],
3928 ((u8 *) buffer)[0xa],
3929 ((u8 *) buffer)[0xb],
3930 ((u8 *) buffer)[0xc],
3931 ((u8 *) buffer)[0xd],
3932 ((u8 *) buffer)[0xe],
3933 ((u8 *) buffer)[0xf]);
3934 else
3935 len += sprintf(buf + len, "%s\n",
3936 snprint_line(line, sizeof(line),
3937 (u8 *) buffer, 16, loop));
3938 loop += 16;
3941 return len;
3944 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3945 const char *buf, size_t count)
3947 struct ipw2100_priv *priv = dev_get_drvdata(d);
3948 struct net_device *dev = priv->net_dev;
3949 const char *p = buf;
3951 (void)dev; /* kill unused-var warning for debug-only code */
3953 if (count < 1)
3954 return count;
3956 if (p[0] == '1' ||
3957 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3958 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3959 dev->name);
3960 priv->dump_raw = 1;
3962 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3963 tolower(p[1]) == 'f')) {
3964 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3965 dev->name);
3966 priv->dump_raw = 0;
3968 } else if (tolower(p[0]) == 'r') {
3969 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
3970 ipw2100_snapshot_free(priv);
3972 } else
3973 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3974 "reset = clear memory snapshot\n", dev->name);
3976 return count;
3979 static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
3981 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3982 char *buf)
3984 struct ipw2100_priv *priv = dev_get_drvdata(d);
3985 u32 val = 0;
3986 int len = 0;
3987 u32 val_len;
3988 static int loop = 0;
3990 if (priv->status & STATUS_RF_KILL_MASK)
3991 return 0;
3993 if (loop >= ARRAY_SIZE(ord_data))
3994 loop = 0;
3996 /* sysfs provides us PAGE_SIZE buffer */
3997 while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) {
3998 val_len = sizeof(u32);
4000 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
4001 &val_len))
4002 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
4003 ord_data[loop].index,
4004 ord_data[loop].desc);
4005 else
4006 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
4007 ord_data[loop].index, val,
4008 ord_data[loop].desc);
4009 loop++;
4012 return len;
4015 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
4017 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
4018 char *buf)
4020 struct ipw2100_priv *priv = dev_get_drvdata(d);
4021 char *out = buf;
4023 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4024 priv->interrupts, priv->tx_interrupts,
4025 priv->rx_interrupts, priv->inta_other);
4026 out += sprintf(out, "firmware resets: %d\n", priv->resets);
4027 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
4028 #ifdef CONFIG_IPW2100_DEBUG
4029 out += sprintf(out, "packet mismatch image: %s\n",
4030 priv->snapshot[0] ? "YES" : "NO");
4031 #endif
4033 return out - buf;
4036 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
4038 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
4040 int err;
4042 if (mode == priv->ieee->iw_mode)
4043 return 0;
4045 err = ipw2100_disable_adapter(priv);
4046 if (err) {
4047 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
4048 priv->net_dev->name, err);
4049 return err;
4052 switch (mode) {
4053 case IW_MODE_INFRA:
4054 priv->net_dev->type = ARPHRD_ETHER;
4055 break;
4056 case IW_MODE_ADHOC:
4057 priv->net_dev->type = ARPHRD_ETHER;
4058 break;
4059 #ifdef CONFIG_IPW2100_MONITOR
4060 case IW_MODE_MONITOR:
4061 priv->last_mode = priv->ieee->iw_mode;
4062 priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
4063 break;
4064 #endif /* CONFIG_IPW2100_MONITOR */
4067 priv->ieee->iw_mode = mode;
4069 #ifdef CONFIG_PM
4070 /* Indicate ipw2100_download_firmware download firmware
4071 * from disk instead of memory. */
4072 ipw2100_firmware.version = 0;
4073 #endif
4075 printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
4076 priv->reset_backoff = 0;
4077 schedule_reset(priv);
4079 return 0;
4082 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
4083 char *buf)
4085 struct ipw2100_priv *priv = dev_get_drvdata(d);
4086 int len = 0;
4088 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4090 if (priv->status & STATUS_ASSOCIATED)
4091 len += sprintf(buf + len, "connected: %lu\n",
4092 get_seconds() - priv->connect_start);
4093 else
4094 len += sprintf(buf + len, "not connected\n");
4096 DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p");
4097 DUMP_VAR(status, "08lx");
4098 DUMP_VAR(config, "08lx");
4099 DUMP_VAR(capability, "08lx");
4101 len +=
4102 sprintf(buf + len, "last_rtc: %lu\n",
4103 (unsigned long)priv->last_rtc);
4105 DUMP_VAR(fatal_error, "d");
4106 DUMP_VAR(stop_hang_check, "d");
4107 DUMP_VAR(stop_rf_kill, "d");
4108 DUMP_VAR(messages_sent, "d");
4110 DUMP_VAR(tx_pend_stat.value, "d");
4111 DUMP_VAR(tx_pend_stat.hi, "d");
4113 DUMP_VAR(tx_free_stat.value, "d");
4114 DUMP_VAR(tx_free_stat.lo, "d");
4116 DUMP_VAR(msg_free_stat.value, "d");
4117 DUMP_VAR(msg_free_stat.lo, "d");
4119 DUMP_VAR(msg_pend_stat.value, "d");
4120 DUMP_VAR(msg_pend_stat.hi, "d");
4122 DUMP_VAR(fw_pend_stat.value, "d");
4123 DUMP_VAR(fw_pend_stat.hi, "d");
4125 DUMP_VAR(txq_stat.value, "d");
4126 DUMP_VAR(txq_stat.lo, "d");
4128 DUMP_VAR(ieee->scans, "d");
4129 DUMP_VAR(reset_backoff, "d");
4131 return len;
4134 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
4136 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
4137 char *buf)
4139 struct ipw2100_priv *priv = dev_get_drvdata(d);
4140 char essid[IW_ESSID_MAX_SIZE + 1];
4141 u8 bssid[ETH_ALEN];
4142 u32 chan = 0;
4143 char *out = buf;
4144 unsigned int length;
4145 int ret;
4147 if (priv->status & STATUS_RF_KILL_MASK)
4148 return 0;
4150 memset(essid, 0, sizeof(essid));
4151 memset(bssid, 0, sizeof(bssid));
4153 length = IW_ESSID_MAX_SIZE;
4154 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
4155 if (ret)
4156 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4157 __LINE__);
4159 length = sizeof(bssid);
4160 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
4161 bssid, &length);
4162 if (ret)
4163 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4164 __LINE__);
4166 length = sizeof(u32);
4167 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
4168 if (ret)
4169 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4170 __LINE__);
4172 out += sprintf(out, "ESSID: %s\n", essid);
4173 out += sprintf(out, "BSSID: %pM\n", bssid);
4174 out += sprintf(out, "Channel: %d\n", chan);
4176 return out - buf;
4179 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
4181 #ifdef CONFIG_IPW2100_DEBUG
4182 static ssize_t show_debug_level(struct device_driver *d, char *buf)
4184 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
4187 static ssize_t store_debug_level(struct device_driver *d,
4188 const char *buf, size_t count)
4190 char *p = (char *)buf;
4191 u32 val;
4193 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4194 p++;
4195 if (p[0] == 'x' || p[0] == 'X')
4196 p++;
4197 val = simple_strtoul(p, &p, 16);
4198 } else
4199 val = simple_strtoul(p, &p, 10);
4200 if (p == buf)
4201 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
4202 else
4203 ipw2100_debug_level = val;
4205 return strnlen(buf, count);
4208 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4209 store_debug_level);
4210 #endif /* CONFIG_IPW2100_DEBUG */
4212 static ssize_t show_fatal_error(struct device *d,
4213 struct device_attribute *attr, char *buf)
4215 struct ipw2100_priv *priv = dev_get_drvdata(d);
4216 char *out = buf;
4217 int i;
4219 if (priv->fatal_error)
4220 out += sprintf(out, "0x%08X\n", priv->fatal_error);
4221 else
4222 out += sprintf(out, "0\n");
4224 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4225 if (!priv->fatal_errors[(priv->fatal_index - i) %
4226 IPW2100_ERROR_QUEUE])
4227 continue;
4229 out += sprintf(out, "%d. 0x%08X\n", i,
4230 priv->fatal_errors[(priv->fatal_index - i) %
4231 IPW2100_ERROR_QUEUE]);
4234 return out - buf;
4237 static ssize_t store_fatal_error(struct device *d,
4238 struct device_attribute *attr, const char *buf,
4239 size_t count)
4241 struct ipw2100_priv *priv = dev_get_drvdata(d);
4242 schedule_reset(priv);
4243 return count;
4246 static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
4247 store_fatal_error);
4249 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4250 char *buf)
4252 struct ipw2100_priv *priv = dev_get_drvdata(d);
4253 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4256 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4257 const char *buf, size_t count)
4259 struct ipw2100_priv *priv = dev_get_drvdata(d);
4260 struct net_device *dev = priv->net_dev;
4261 char buffer[] = "00000000";
4262 unsigned long len =
4263 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4264 unsigned long val;
4265 char *p = buffer;
4267 (void)dev; /* kill unused-var warning for debug-only code */
4269 IPW_DEBUG_INFO("enter\n");
4271 strncpy(buffer, buf, len);
4272 buffer[len] = 0;
4274 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4275 p++;
4276 if (p[0] == 'x' || p[0] == 'X')
4277 p++;
4278 val = simple_strtoul(p, &p, 16);
4279 } else
4280 val = simple_strtoul(p, &p, 10);
4281 if (p == buffer) {
4282 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
4283 } else {
4284 priv->ieee->scan_age = val;
4285 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4288 IPW_DEBUG_INFO("exit\n");
4289 return len;
4292 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4294 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4295 char *buf)
4297 /* 0 - RF kill not enabled
4298 1 - SW based RF kill active (sysfs)
4299 2 - HW based RF kill active
4300 3 - Both HW and SW baed RF kill active */
4301 struct ipw2100_priv *priv = dev_get_drvdata(d);
4302 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4303 (rf_kill_active(priv) ? 0x2 : 0x0);
4304 return sprintf(buf, "%i\n", val);
4307 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4309 if ((disable_radio ? 1 : 0) ==
4310 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4311 return 0;
4313 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4314 disable_radio ? "OFF" : "ON");
4316 mutex_lock(&priv->action_mutex);
4318 if (disable_radio) {
4319 priv->status |= STATUS_RF_KILL_SW;
4320 ipw2100_down(priv);
4321 } else {
4322 priv->status &= ~STATUS_RF_KILL_SW;
4323 if (rf_kill_active(priv)) {
4324 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4325 "disabled by HW switch\n");
4326 /* Make sure the RF_KILL check timer is running */
4327 priv->stop_rf_kill = 0;
4328 cancel_delayed_work(&priv->rf_kill);
4329 schedule_delayed_work(&priv->rf_kill,
4330 round_jiffies_relative(HZ));
4331 } else
4332 schedule_reset(priv);
4335 mutex_unlock(&priv->action_mutex);
4336 return 1;
4339 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4340 const char *buf, size_t count)
4342 struct ipw2100_priv *priv = dev_get_drvdata(d);
4343 ipw_radio_kill_sw(priv, buf[0] == '1');
4344 return count;
4347 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
4349 static struct attribute *ipw2100_sysfs_entries[] = {
4350 &dev_attr_hardware.attr,
4351 &dev_attr_registers.attr,
4352 &dev_attr_ordinals.attr,
4353 &dev_attr_pci.attr,
4354 &dev_attr_stats.attr,
4355 &dev_attr_internals.attr,
4356 &dev_attr_bssinfo.attr,
4357 &dev_attr_memory.attr,
4358 &dev_attr_scan_age.attr,
4359 &dev_attr_fatal_error.attr,
4360 &dev_attr_rf_kill.attr,
4361 &dev_attr_cfg.attr,
4362 &dev_attr_status.attr,
4363 &dev_attr_capability.attr,
4364 NULL,
4367 static struct attribute_group ipw2100_attribute_group = {
4368 .attrs = ipw2100_sysfs_entries,
4371 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4373 struct ipw2100_status_queue *q = &priv->status_queue;
4375 IPW_DEBUG_INFO("enter\n");
4377 q->size = entries * sizeof(struct ipw2100_status);
4378 q->drv =
4379 (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
4380 q->size, &q->nic);
4381 if (!q->drv) {
4382 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4383 return -ENOMEM;
4386 memset(q->drv, 0, q->size);
4388 IPW_DEBUG_INFO("exit\n");
4390 return 0;
4393 static void status_queue_free(struct ipw2100_priv *priv)
4395 IPW_DEBUG_INFO("enter\n");
4397 if (priv->status_queue.drv) {
4398 pci_free_consistent(priv->pci_dev, priv->status_queue.size,
4399 priv->status_queue.drv,
4400 priv->status_queue.nic);
4401 priv->status_queue.drv = NULL;
4404 IPW_DEBUG_INFO("exit\n");
4407 static int bd_queue_allocate(struct ipw2100_priv *priv,
4408 struct ipw2100_bd_queue *q, int entries)
4410 IPW_DEBUG_INFO("enter\n");
4412 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4414 q->entries = entries;
4415 q->size = entries * sizeof(struct ipw2100_bd);
4416 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4417 if (!q->drv) {
4418 IPW_DEBUG_INFO
4419 ("can't allocate shared memory for buffer descriptors\n");
4420 return -ENOMEM;
4422 memset(q->drv, 0, q->size);
4424 IPW_DEBUG_INFO("exit\n");
4426 return 0;
4429 static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
4431 IPW_DEBUG_INFO("enter\n");
4433 if (!q)
4434 return;
4436 if (q->drv) {
4437 pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
4438 q->drv = NULL;
4441 IPW_DEBUG_INFO("exit\n");
4444 static void bd_queue_initialize(struct ipw2100_priv *priv,
4445 struct ipw2100_bd_queue *q, u32 base, u32 size,
4446 u32 r, u32 w)
4448 IPW_DEBUG_INFO("enter\n");
4450 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
4451 (u32) q->nic);
4453 write_register(priv->net_dev, base, q->nic);
4454 write_register(priv->net_dev, size, q->entries);
4455 write_register(priv->net_dev, r, q->oldest);
4456 write_register(priv->net_dev, w, q->next);
4458 IPW_DEBUG_INFO("exit\n");
4461 static void ipw2100_kill_works(struct ipw2100_priv *priv)
4463 priv->stop_rf_kill = 1;
4464 priv->stop_hang_check = 1;
4465 cancel_delayed_work_sync(&priv->reset_work);
4466 cancel_delayed_work_sync(&priv->security_work);
4467 cancel_delayed_work_sync(&priv->wx_event_work);
4468 cancel_delayed_work_sync(&priv->hang_check);
4469 cancel_delayed_work_sync(&priv->rf_kill);
4470 cancel_work_sync(&priv->scan_event_now);
4471 cancel_delayed_work_sync(&priv->scan_event_later);
4474 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4476 int i, j, err = -EINVAL;
4477 void *v;
4478 dma_addr_t p;
4480 IPW_DEBUG_INFO("enter\n");
4482 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4483 if (err) {
4484 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4485 priv->net_dev->name);
4486 return err;
4489 priv->tx_buffers =
4490 kmalloc(TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
4491 GFP_ATOMIC);
4492 if (!priv->tx_buffers) {
4493 printk(KERN_ERR DRV_NAME
4494 ": %s: alloc failed form tx buffers.\n",
4495 priv->net_dev->name);
4496 bd_queue_free(priv, &priv->tx_queue);
4497 return -ENOMEM;
4500 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4501 v = pci_alloc_consistent(priv->pci_dev,
4502 sizeof(struct ipw2100_data_header),
4503 &p);
4504 if (!v) {
4505 printk(KERN_ERR DRV_NAME
4506 ": %s: PCI alloc failed for tx " "buffers.\n",
4507 priv->net_dev->name);
4508 err = -ENOMEM;
4509 break;
4512 priv->tx_buffers[i].type = DATA;
4513 priv->tx_buffers[i].info.d_struct.data =
4514 (struct ipw2100_data_header *)v;
4515 priv->tx_buffers[i].info.d_struct.data_phys = p;
4516 priv->tx_buffers[i].info.d_struct.txb = NULL;
4519 if (i == TX_PENDED_QUEUE_LENGTH)
4520 return 0;
4522 for (j = 0; j < i; j++) {
4523 pci_free_consistent(priv->pci_dev,
4524 sizeof(struct ipw2100_data_header),
4525 priv->tx_buffers[j].info.d_struct.data,
4526 priv->tx_buffers[j].info.d_struct.
4527 data_phys);
4530 kfree(priv->tx_buffers);
4531 priv->tx_buffers = NULL;
4533 return err;
4536 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4538 int i;
4540 IPW_DEBUG_INFO("enter\n");
4543 * reinitialize packet info lists
4545 INIT_LIST_HEAD(&priv->fw_pend_list);
4546 INIT_STAT(&priv->fw_pend_stat);
4549 * reinitialize lists
4551 INIT_LIST_HEAD(&priv->tx_pend_list);
4552 INIT_LIST_HEAD(&priv->tx_free_list);
4553 INIT_STAT(&priv->tx_pend_stat);
4554 INIT_STAT(&priv->tx_free_stat);
4556 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4557 /* We simply drop any SKBs that have been queued for
4558 * transmit */
4559 if (priv->tx_buffers[i].info.d_struct.txb) {
4560 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4561 txb);
4562 priv->tx_buffers[i].info.d_struct.txb = NULL;
4565 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4568 SET_STAT(&priv->tx_free_stat, i);
4570 priv->tx_queue.oldest = 0;
4571 priv->tx_queue.available = priv->tx_queue.entries;
4572 priv->tx_queue.next = 0;
4573 INIT_STAT(&priv->txq_stat);
4574 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4576 bd_queue_initialize(priv, &priv->tx_queue,
4577 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4578 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4579 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4580 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4582 IPW_DEBUG_INFO("exit\n");
4586 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4588 int i;
4590 IPW_DEBUG_INFO("enter\n");
4592 bd_queue_free(priv, &priv->tx_queue);
4594 if (!priv->tx_buffers)
4595 return;
4597 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4598 if (priv->tx_buffers[i].info.d_struct.txb) {
4599 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4600 txb);
4601 priv->tx_buffers[i].info.d_struct.txb = NULL;
4603 if (priv->tx_buffers[i].info.d_struct.data)
4604 pci_free_consistent(priv->pci_dev,
4605 sizeof(struct ipw2100_data_header),
4606 priv->tx_buffers[i].info.d_struct.
4607 data,
4608 priv->tx_buffers[i].info.d_struct.
4609 data_phys);
4612 kfree(priv->tx_buffers);
4613 priv->tx_buffers = NULL;
4615 IPW_DEBUG_INFO("exit\n");
4618 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4620 int i, j, err = -EINVAL;
4622 IPW_DEBUG_INFO("enter\n");
4624 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4625 if (err) {
4626 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4627 return err;
4630 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4631 if (err) {
4632 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4633 bd_queue_free(priv, &priv->rx_queue);
4634 return err;
4638 * allocate packets
4640 priv->rx_buffers = kmalloc(RX_QUEUE_LENGTH *
4641 sizeof(struct ipw2100_rx_packet),
4642 GFP_KERNEL);
4643 if (!priv->rx_buffers) {
4644 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4646 bd_queue_free(priv, &priv->rx_queue);
4648 status_queue_free(priv);
4650 return -ENOMEM;
4653 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4654 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4656 err = ipw2100_alloc_skb(priv, packet);
4657 if (unlikely(err)) {
4658 err = -ENOMEM;
4659 break;
4662 /* The BD holds the cache aligned address */
4663 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4664 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4665 priv->status_queue.drv[i].status_fields = 0;
4668 if (i == RX_QUEUE_LENGTH)
4669 return 0;
4671 for (j = 0; j < i; j++) {
4672 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4673 sizeof(struct ipw2100_rx_packet),
4674 PCI_DMA_FROMDEVICE);
4675 dev_kfree_skb(priv->rx_buffers[j].skb);
4678 kfree(priv->rx_buffers);
4679 priv->rx_buffers = NULL;
4681 bd_queue_free(priv, &priv->rx_queue);
4683 status_queue_free(priv);
4685 return err;
4688 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4690 IPW_DEBUG_INFO("enter\n");
4692 priv->rx_queue.oldest = 0;
4693 priv->rx_queue.available = priv->rx_queue.entries - 1;
4694 priv->rx_queue.next = priv->rx_queue.entries - 1;
4696 INIT_STAT(&priv->rxq_stat);
4697 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4699 bd_queue_initialize(priv, &priv->rx_queue,
4700 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4701 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4702 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4703 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4705 /* set up the status queue */
4706 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4707 priv->status_queue.nic);
4709 IPW_DEBUG_INFO("exit\n");
4712 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4714 int i;
4716 IPW_DEBUG_INFO("enter\n");
4718 bd_queue_free(priv, &priv->rx_queue);
4719 status_queue_free(priv);
4721 if (!priv->rx_buffers)
4722 return;
4724 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4725 if (priv->rx_buffers[i].rxp) {
4726 pci_unmap_single(priv->pci_dev,
4727 priv->rx_buffers[i].dma_addr,
4728 sizeof(struct ipw2100_rx),
4729 PCI_DMA_FROMDEVICE);
4730 dev_kfree_skb(priv->rx_buffers[i].skb);
4734 kfree(priv->rx_buffers);
4735 priv->rx_buffers = NULL;
4737 IPW_DEBUG_INFO("exit\n");
4740 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4742 u32 length = ETH_ALEN;
4743 u8 addr[ETH_ALEN];
4745 int err;
4747 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length);
4748 if (err) {
4749 IPW_DEBUG_INFO("MAC address read failed\n");
4750 return -EIO;
4753 memcpy(priv->net_dev->dev_addr, addr, ETH_ALEN);
4754 IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr);
4756 return 0;
4759 /********************************************************************
4761 * Firmware Commands
4763 ********************************************************************/
4765 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4767 struct host_command cmd = {
4768 .host_command = ADAPTER_ADDRESS,
4769 .host_command_sequence = 0,
4770 .host_command_length = ETH_ALEN
4772 int err;
4774 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4776 IPW_DEBUG_INFO("enter\n");
4778 if (priv->config & CFG_CUSTOM_MAC) {
4779 memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
4780 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4781 } else
4782 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4783 ETH_ALEN);
4785 err = ipw2100_hw_send_command(priv, &cmd);
4787 IPW_DEBUG_INFO("exit\n");
4788 return err;
4791 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4792 int batch_mode)
4794 struct host_command cmd = {
4795 .host_command = PORT_TYPE,
4796 .host_command_sequence = 0,
4797 .host_command_length = sizeof(u32)
4799 int err;
4801 switch (port_type) {
4802 case IW_MODE_INFRA:
4803 cmd.host_command_parameters[0] = IPW_BSS;
4804 break;
4805 case IW_MODE_ADHOC:
4806 cmd.host_command_parameters[0] = IPW_IBSS;
4807 break;
4810 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4811 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4813 if (!batch_mode) {
4814 err = ipw2100_disable_adapter(priv);
4815 if (err) {
4816 printk(KERN_ERR DRV_NAME
4817 ": %s: Could not disable adapter %d\n",
4818 priv->net_dev->name, err);
4819 return err;
4823 /* send cmd to firmware */
4824 err = ipw2100_hw_send_command(priv, &cmd);
4826 if (!batch_mode)
4827 ipw2100_enable_adapter(priv);
4829 return err;
4832 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4833 int batch_mode)
4835 struct host_command cmd = {
4836 .host_command = CHANNEL,
4837 .host_command_sequence = 0,
4838 .host_command_length = sizeof(u32)
4840 int err;
4842 cmd.host_command_parameters[0] = channel;
4844 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4846 /* If BSS then we don't support channel selection */
4847 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4848 return 0;
4850 if ((channel != 0) &&
4851 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4852 return -EINVAL;
4854 if (!batch_mode) {
4855 err = ipw2100_disable_adapter(priv);
4856 if (err)
4857 return err;
4860 err = ipw2100_hw_send_command(priv, &cmd);
4861 if (err) {
4862 IPW_DEBUG_INFO("Failed to set channel to %d", channel);
4863 return err;
4866 if (channel)
4867 priv->config |= CFG_STATIC_CHANNEL;
4868 else
4869 priv->config &= ~CFG_STATIC_CHANNEL;
4871 priv->channel = channel;
4873 if (!batch_mode) {
4874 err = ipw2100_enable_adapter(priv);
4875 if (err)
4876 return err;
4879 return 0;
4882 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4884 struct host_command cmd = {
4885 .host_command = SYSTEM_CONFIG,
4886 .host_command_sequence = 0,
4887 .host_command_length = 12,
4889 u32 ibss_mask, len = sizeof(u32);
4890 int err;
4892 /* Set system configuration */
4894 if (!batch_mode) {
4895 err = ipw2100_disable_adapter(priv);
4896 if (err)
4897 return err;
4900 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4901 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4903 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4904 IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
4906 if (!(priv->config & CFG_LONG_PREAMBLE))
4907 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4909 err = ipw2100_get_ordinal(priv,
4910 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4911 &ibss_mask, &len);
4912 if (err)
4913 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4915 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4916 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4918 /* 11b only */
4919 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4921 err = ipw2100_hw_send_command(priv, &cmd);
4922 if (err)
4923 return err;
4925 /* If IPv6 is configured in the kernel then we don't want to filter out all
4926 * of the multicast packets as IPv6 needs some. */
4927 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4928 cmd.host_command = ADD_MULTICAST;
4929 cmd.host_command_sequence = 0;
4930 cmd.host_command_length = 0;
4932 ipw2100_hw_send_command(priv, &cmd);
4933 #endif
4934 if (!batch_mode) {
4935 err = ipw2100_enable_adapter(priv);
4936 if (err)
4937 return err;
4940 return 0;
4943 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4944 int batch_mode)
4946 struct host_command cmd = {
4947 .host_command = BASIC_TX_RATES,
4948 .host_command_sequence = 0,
4949 .host_command_length = 4
4951 int err;
4953 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4955 if (!batch_mode) {
4956 err = ipw2100_disable_adapter(priv);
4957 if (err)
4958 return err;
4961 /* Set BASIC TX Rate first */
4962 ipw2100_hw_send_command(priv, &cmd);
4964 /* Set TX Rate */
4965 cmd.host_command = TX_RATES;
4966 ipw2100_hw_send_command(priv, &cmd);
4968 /* Set MSDU TX Rate */
4969 cmd.host_command = MSDU_TX_RATES;
4970 ipw2100_hw_send_command(priv, &cmd);
4972 if (!batch_mode) {
4973 err = ipw2100_enable_adapter(priv);
4974 if (err)
4975 return err;
4978 priv->tx_rates = rate;
4980 return 0;
4983 static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
4985 struct host_command cmd = {
4986 .host_command = POWER_MODE,
4987 .host_command_sequence = 0,
4988 .host_command_length = 4
4990 int err;
4992 cmd.host_command_parameters[0] = power_level;
4994 err = ipw2100_hw_send_command(priv, &cmd);
4995 if (err)
4996 return err;
4998 if (power_level == IPW_POWER_MODE_CAM)
4999 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
5000 else
5001 priv->power_mode = IPW_POWER_ENABLED | power_level;
5003 #ifdef IPW2100_TX_POWER
5004 if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
5005 /* Set beacon interval */
5006 cmd.host_command = TX_POWER_INDEX;
5007 cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
5009 err = ipw2100_hw_send_command(priv, &cmd);
5010 if (err)
5011 return err;
5013 #endif
5015 return 0;
5018 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
5020 struct host_command cmd = {
5021 .host_command = RTS_THRESHOLD,
5022 .host_command_sequence = 0,
5023 .host_command_length = 4
5025 int err;
5027 if (threshold & RTS_DISABLED)
5028 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
5029 else
5030 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
5032 err = ipw2100_hw_send_command(priv, &cmd);
5033 if (err)
5034 return err;
5036 priv->rts_threshold = threshold;
5038 return 0;
5041 #if 0
5042 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
5043 u32 threshold, int batch_mode)
5045 struct host_command cmd = {
5046 .host_command = FRAG_THRESHOLD,
5047 .host_command_sequence = 0,
5048 .host_command_length = 4,
5049 .host_command_parameters[0] = 0,
5051 int err;
5053 if (!batch_mode) {
5054 err = ipw2100_disable_adapter(priv);
5055 if (err)
5056 return err;
5059 if (threshold == 0)
5060 threshold = DEFAULT_FRAG_THRESHOLD;
5061 else {
5062 threshold = max(threshold, MIN_FRAG_THRESHOLD);
5063 threshold = min(threshold, MAX_FRAG_THRESHOLD);
5066 cmd.host_command_parameters[0] = threshold;
5068 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
5070 err = ipw2100_hw_send_command(priv, &cmd);
5072 if (!batch_mode)
5073 ipw2100_enable_adapter(priv);
5075 if (!err)
5076 priv->frag_threshold = threshold;
5078 return err;
5080 #endif
5082 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
5084 struct host_command cmd = {
5085 .host_command = SHORT_RETRY_LIMIT,
5086 .host_command_sequence = 0,
5087 .host_command_length = 4
5089 int err;
5091 cmd.host_command_parameters[0] = retry;
5093 err = ipw2100_hw_send_command(priv, &cmd);
5094 if (err)
5095 return err;
5097 priv->short_retry_limit = retry;
5099 return 0;
5102 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
5104 struct host_command cmd = {
5105 .host_command = LONG_RETRY_LIMIT,
5106 .host_command_sequence = 0,
5107 .host_command_length = 4
5109 int err;
5111 cmd.host_command_parameters[0] = retry;
5113 err = ipw2100_hw_send_command(priv, &cmd);
5114 if (err)
5115 return err;
5117 priv->long_retry_limit = retry;
5119 return 0;
5122 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
5123 int batch_mode)
5125 struct host_command cmd = {
5126 .host_command = MANDATORY_BSSID,
5127 .host_command_sequence = 0,
5128 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
5130 int err;
5132 #ifdef CONFIG_IPW2100_DEBUG
5133 if (bssid != NULL)
5134 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid);
5135 else
5136 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5137 #endif
5138 /* if BSSID is empty then we disable mandatory bssid mode */
5139 if (bssid != NULL)
5140 memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
5142 if (!batch_mode) {
5143 err = ipw2100_disable_adapter(priv);
5144 if (err)
5145 return err;
5148 err = ipw2100_hw_send_command(priv, &cmd);
5150 if (!batch_mode)
5151 ipw2100_enable_adapter(priv);
5153 return err;
5156 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
5158 struct host_command cmd = {
5159 .host_command = DISASSOCIATION_BSSID,
5160 .host_command_sequence = 0,
5161 .host_command_length = ETH_ALEN
5163 int err;
5164 int len;
5166 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5168 len = ETH_ALEN;
5169 /* The Firmware currently ignores the BSSID and just disassociates from
5170 * the currently associated AP -- but in the off chance that a future
5171 * firmware does use the BSSID provided here, we go ahead and try and
5172 * set it to the currently associated AP's BSSID */
5173 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
5175 err = ipw2100_hw_send_command(priv, &cmd);
5177 return err;
5180 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
5181 struct ipw2100_wpa_assoc_frame *, int)
5182 __attribute__ ((unused));
5184 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
5185 struct ipw2100_wpa_assoc_frame *wpa_frame,
5186 int batch_mode)
5188 struct host_command cmd = {
5189 .host_command = SET_WPA_IE,
5190 .host_command_sequence = 0,
5191 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5193 int err;
5195 IPW_DEBUG_HC("SET_WPA_IE\n");
5197 if (!batch_mode) {
5198 err = ipw2100_disable_adapter(priv);
5199 if (err)
5200 return err;
5203 memcpy(cmd.host_command_parameters, wpa_frame,
5204 sizeof(struct ipw2100_wpa_assoc_frame));
5206 err = ipw2100_hw_send_command(priv, &cmd);
5208 if (!batch_mode) {
5209 if (ipw2100_enable_adapter(priv))
5210 err = -EIO;
5213 return err;
5216 struct security_info_params {
5217 u32 allowed_ciphers;
5218 u16 version;
5219 u8 auth_mode;
5220 u8 replay_counters_number;
5221 u8 unicast_using_group;
5222 } __packed;
5224 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5225 int auth_mode,
5226 int security_level,
5227 int unicast_using_group,
5228 int batch_mode)
5230 struct host_command cmd = {
5231 .host_command = SET_SECURITY_INFORMATION,
5232 .host_command_sequence = 0,
5233 .host_command_length = sizeof(struct security_info_params)
5235 struct security_info_params *security =
5236 (struct security_info_params *)&cmd.host_command_parameters;
5237 int err;
5238 memset(security, 0, sizeof(*security));
5240 /* If shared key AP authentication is turned on, then we need to
5241 * configure the firmware to try and use it.
5243 * Actual data encryption/decryption is handled by the host. */
5244 security->auth_mode = auth_mode;
5245 security->unicast_using_group = unicast_using_group;
5247 switch (security_level) {
5248 default:
5249 case SEC_LEVEL_0:
5250 security->allowed_ciphers = IPW_NONE_CIPHER;
5251 break;
5252 case SEC_LEVEL_1:
5253 security->allowed_ciphers = IPW_WEP40_CIPHER |
5254 IPW_WEP104_CIPHER;
5255 break;
5256 case SEC_LEVEL_2:
5257 security->allowed_ciphers = IPW_WEP40_CIPHER |
5258 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5259 break;
5260 case SEC_LEVEL_2_CKIP:
5261 security->allowed_ciphers = IPW_WEP40_CIPHER |
5262 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5263 break;
5264 case SEC_LEVEL_3:
5265 security->allowed_ciphers = IPW_WEP40_CIPHER |
5266 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5267 break;
5270 IPW_DEBUG_HC
5271 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5272 security->auth_mode, security->allowed_ciphers, security_level);
5274 security->replay_counters_number = 0;
5276 if (!batch_mode) {
5277 err = ipw2100_disable_adapter(priv);
5278 if (err)
5279 return err;
5282 err = ipw2100_hw_send_command(priv, &cmd);
5284 if (!batch_mode)
5285 ipw2100_enable_adapter(priv);
5287 return err;
5290 static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
5292 struct host_command cmd = {
5293 .host_command = TX_POWER_INDEX,
5294 .host_command_sequence = 0,
5295 .host_command_length = 4
5297 int err = 0;
5298 u32 tmp = tx_power;
5300 if (tx_power != IPW_TX_POWER_DEFAULT)
5301 tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
5302 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
5304 cmd.host_command_parameters[0] = tmp;
5306 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5307 err = ipw2100_hw_send_command(priv, &cmd);
5308 if (!err)
5309 priv->tx_power = tx_power;
5311 return 0;
5314 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5315 u32 interval, int batch_mode)
5317 struct host_command cmd = {
5318 .host_command = BEACON_INTERVAL,
5319 .host_command_sequence = 0,
5320 .host_command_length = 4
5322 int err;
5324 cmd.host_command_parameters[0] = interval;
5326 IPW_DEBUG_INFO("enter\n");
5328 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5329 if (!batch_mode) {
5330 err = ipw2100_disable_adapter(priv);
5331 if (err)
5332 return err;
5335 ipw2100_hw_send_command(priv, &cmd);
5337 if (!batch_mode) {
5338 err = ipw2100_enable_adapter(priv);
5339 if (err)
5340 return err;
5344 IPW_DEBUG_INFO("exit\n");
5346 return 0;
5349 static void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5351 ipw2100_tx_initialize(priv);
5352 ipw2100_rx_initialize(priv);
5353 ipw2100_msg_initialize(priv);
5356 static void ipw2100_queues_free(struct ipw2100_priv *priv)
5358 ipw2100_tx_free(priv);
5359 ipw2100_rx_free(priv);
5360 ipw2100_msg_free(priv);
5363 static int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5365 if (ipw2100_tx_allocate(priv) ||
5366 ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
5367 goto fail;
5369 return 0;
5371 fail:
5372 ipw2100_tx_free(priv);
5373 ipw2100_rx_free(priv);
5374 ipw2100_msg_free(priv);
5375 return -ENOMEM;
5378 #define IPW_PRIVACY_CAPABLE 0x0008
5380 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5381 int batch_mode)
5383 struct host_command cmd = {
5384 .host_command = WEP_FLAGS,
5385 .host_command_sequence = 0,
5386 .host_command_length = 4
5388 int err;
5390 cmd.host_command_parameters[0] = flags;
5392 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5394 if (!batch_mode) {
5395 err = ipw2100_disable_adapter(priv);
5396 if (err) {
5397 printk(KERN_ERR DRV_NAME
5398 ": %s: Could not disable adapter %d\n",
5399 priv->net_dev->name, err);
5400 return err;
5404 /* send cmd to firmware */
5405 err = ipw2100_hw_send_command(priv, &cmd);
5407 if (!batch_mode)
5408 ipw2100_enable_adapter(priv);
5410 return err;
5413 struct ipw2100_wep_key {
5414 u8 idx;
5415 u8 len;
5416 u8 key[13];
5419 /* Macros to ease up priting WEP keys */
5420 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5421 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5422 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5423 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5426 * Set a the wep key
5428 * @priv: struct to work on
5429 * @idx: index of the key we want to set
5430 * @key: ptr to the key data to set
5431 * @len: length of the buffer at @key
5432 * @batch_mode: FIXME perform the operation in batch mode, not
5433 * disabling the device.
5435 * @returns 0 if OK, < 0 errno code on error.
5437 * Fill out a command structure with the new wep key, length an
5438 * index and send it down the wire.
5440 static int ipw2100_set_key(struct ipw2100_priv *priv,
5441 int idx, char *key, int len, int batch_mode)
5443 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5444 struct host_command cmd = {
5445 .host_command = WEP_KEY_INFO,
5446 .host_command_sequence = 0,
5447 .host_command_length = sizeof(struct ipw2100_wep_key),
5449 struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
5450 int err;
5452 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5453 idx, keylen, len);
5455 /* NOTE: We don't check cached values in case the firmware was reset
5456 * or some other problem is occurring. If the user is setting the key,
5457 * then we push the change */
5459 wep_key->idx = idx;
5460 wep_key->len = keylen;
5462 if (keylen) {
5463 memcpy(wep_key->key, key, len);
5464 memset(wep_key->key + len, 0, keylen - len);
5467 /* Will be optimized out on debug not being configured in */
5468 if (keylen == 0)
5469 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5470 priv->net_dev->name, wep_key->idx);
5471 else if (keylen == 5)
5472 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5473 priv->net_dev->name, wep_key->idx, wep_key->len,
5474 WEP_STR_64(wep_key->key));
5475 else
5476 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5477 "\n",
5478 priv->net_dev->name, wep_key->idx, wep_key->len,
5479 WEP_STR_128(wep_key->key));
5481 if (!batch_mode) {
5482 err = ipw2100_disable_adapter(priv);
5483 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5484 if (err) {
5485 printk(KERN_ERR DRV_NAME
5486 ": %s: Could not disable adapter %d\n",
5487 priv->net_dev->name, err);
5488 return err;
5492 /* send cmd to firmware */
5493 err = ipw2100_hw_send_command(priv, &cmd);
5495 if (!batch_mode) {
5496 int err2 = ipw2100_enable_adapter(priv);
5497 if (err == 0)
5498 err = err2;
5500 return err;
5503 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5504 int idx, int batch_mode)
5506 struct host_command cmd = {
5507 .host_command = WEP_KEY_INDEX,
5508 .host_command_sequence = 0,
5509 .host_command_length = 4,
5510 .host_command_parameters = {idx},
5512 int err;
5514 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5516 if (idx < 0 || idx > 3)
5517 return -EINVAL;
5519 if (!batch_mode) {
5520 err = ipw2100_disable_adapter(priv);
5521 if (err) {
5522 printk(KERN_ERR DRV_NAME
5523 ": %s: Could not disable adapter %d\n",
5524 priv->net_dev->name, err);
5525 return err;
5529 /* send cmd to firmware */
5530 err = ipw2100_hw_send_command(priv, &cmd);
5532 if (!batch_mode)
5533 ipw2100_enable_adapter(priv);
5535 return err;
5538 static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
5540 int i, err, auth_mode, sec_level, use_group;
5542 if (!(priv->status & STATUS_RUNNING))
5543 return 0;
5545 if (!batch_mode) {
5546 err = ipw2100_disable_adapter(priv);
5547 if (err)
5548 return err;
5551 if (!priv->ieee->sec.enabled) {
5552 err =
5553 ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
5554 SEC_LEVEL_0, 0, 1);
5555 } else {
5556 auth_mode = IPW_AUTH_OPEN;
5557 if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
5558 if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
5559 auth_mode = IPW_AUTH_SHARED;
5560 else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
5561 auth_mode = IPW_AUTH_LEAP_CISCO_ID;
5564 sec_level = SEC_LEVEL_0;
5565 if (priv->ieee->sec.flags & SEC_LEVEL)
5566 sec_level = priv->ieee->sec.level;
5568 use_group = 0;
5569 if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
5570 use_group = priv->ieee->sec.unicast_uses_group;
5572 err =
5573 ipw2100_set_security_information(priv, auth_mode, sec_level,
5574 use_group, 1);
5577 if (err)
5578 goto exit;
5580 if (priv->ieee->sec.enabled) {
5581 for (i = 0; i < 4; i++) {
5582 if (!(priv->ieee->sec.flags & (1 << i))) {
5583 memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
5584 priv->ieee->sec.key_sizes[i] = 0;
5585 } else {
5586 err = ipw2100_set_key(priv, i,
5587 priv->ieee->sec.keys[i],
5588 priv->ieee->sec.
5589 key_sizes[i], 1);
5590 if (err)
5591 goto exit;
5595 ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1);
5598 /* Always enable privacy so the Host can filter WEP packets if
5599 * encrypted data is sent up */
5600 err =
5601 ipw2100_set_wep_flags(priv,
5602 priv->ieee->sec.
5603 enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5604 if (err)
5605 goto exit;
5607 priv->status &= ~STATUS_SECURITY_UPDATED;
5609 exit:
5610 if (!batch_mode)
5611 ipw2100_enable_adapter(priv);
5613 return err;
5616 static void ipw2100_security_work(struct work_struct *work)
5618 struct ipw2100_priv *priv =
5619 container_of(work, struct ipw2100_priv, security_work.work);
5621 /* If we happen to have reconnected before we get a chance to
5622 * process this, then update the security settings--which causes
5623 * a disassociation to occur */
5624 if (!(priv->status & STATUS_ASSOCIATED) &&
5625 priv->status & STATUS_SECURITY_UPDATED)
5626 ipw2100_configure_security(priv, 0);
5629 static void shim__set_security(struct net_device *dev,
5630 struct libipw_security *sec)
5632 struct ipw2100_priv *priv = libipw_priv(dev);
5633 int i, force_update = 0;
5635 mutex_lock(&priv->action_mutex);
5636 if (!(priv->status & STATUS_INITIALIZED))
5637 goto done;
5639 for (i = 0; i < 4; i++) {
5640 if (sec->flags & (1 << i)) {
5641 priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
5642 if (sec->key_sizes[i] == 0)
5643 priv->ieee->sec.flags &= ~(1 << i);
5644 else
5645 memcpy(priv->ieee->sec.keys[i], sec->keys[i],
5646 sec->key_sizes[i]);
5647 if (sec->level == SEC_LEVEL_1) {
5648 priv->ieee->sec.flags |= (1 << i);
5649 priv->status |= STATUS_SECURITY_UPDATED;
5650 } else
5651 priv->ieee->sec.flags &= ~(1 << i);
5655 if ((sec->flags & SEC_ACTIVE_KEY) &&
5656 priv->ieee->sec.active_key != sec->active_key) {
5657 if (sec->active_key <= 3) {
5658 priv->ieee->sec.active_key = sec->active_key;
5659 priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
5660 } else
5661 priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
5663 priv->status |= STATUS_SECURITY_UPDATED;
5666 if ((sec->flags & SEC_AUTH_MODE) &&
5667 (priv->ieee->sec.auth_mode != sec->auth_mode)) {
5668 priv->ieee->sec.auth_mode = sec->auth_mode;
5669 priv->ieee->sec.flags |= SEC_AUTH_MODE;
5670 priv->status |= STATUS_SECURITY_UPDATED;
5673 if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
5674 priv->ieee->sec.flags |= SEC_ENABLED;
5675 priv->ieee->sec.enabled = sec->enabled;
5676 priv->status |= STATUS_SECURITY_UPDATED;
5677 force_update = 1;
5680 if (sec->flags & SEC_ENCRYPT)
5681 priv->ieee->sec.encrypt = sec->encrypt;
5683 if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
5684 priv->ieee->sec.level = sec->level;
5685 priv->ieee->sec.flags |= SEC_LEVEL;
5686 priv->status |= STATUS_SECURITY_UPDATED;
5689 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5690 priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
5691 priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
5692 priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
5693 priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
5694 priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
5695 priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
5696 priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
5697 priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
5698 priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
5700 /* As a temporary work around to enable WPA until we figure out why
5701 * wpa_supplicant toggles the security capability of the driver, which
5702 * forces a disassocation with force_update...
5704 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5705 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5706 ipw2100_configure_security(priv, 0);
5707 done:
5708 mutex_unlock(&priv->action_mutex);
5711 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5713 int err;
5714 int batch_mode = 1;
5715 u8 *bssid;
5717 IPW_DEBUG_INFO("enter\n");
5719 err = ipw2100_disable_adapter(priv);
5720 if (err)
5721 return err;
5722 #ifdef CONFIG_IPW2100_MONITOR
5723 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5724 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5725 if (err)
5726 return err;
5728 IPW_DEBUG_INFO("exit\n");
5730 return 0;
5732 #endif /* CONFIG_IPW2100_MONITOR */
5734 err = ipw2100_read_mac_address(priv);
5735 if (err)
5736 return -EIO;
5738 err = ipw2100_set_mac_address(priv, batch_mode);
5739 if (err)
5740 return err;
5742 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5743 if (err)
5744 return err;
5746 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5747 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5748 if (err)
5749 return err;
5752 err = ipw2100_system_config(priv, batch_mode);
5753 if (err)
5754 return err;
5756 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5757 if (err)
5758 return err;
5760 /* Default to power mode OFF */
5761 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5762 if (err)
5763 return err;
5765 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5766 if (err)
5767 return err;
5769 if (priv->config & CFG_STATIC_BSSID)
5770 bssid = priv->bssid;
5771 else
5772 bssid = NULL;
5773 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5774 if (err)
5775 return err;
5777 if (priv->config & CFG_STATIC_ESSID)
5778 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5779 batch_mode);
5780 else
5781 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5782 if (err)
5783 return err;
5785 err = ipw2100_configure_security(priv, batch_mode);
5786 if (err)
5787 return err;
5789 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5790 err =
5791 ipw2100_set_ibss_beacon_interval(priv,
5792 priv->beacon_interval,
5793 batch_mode);
5794 if (err)
5795 return err;
5797 err = ipw2100_set_tx_power(priv, priv->tx_power);
5798 if (err)
5799 return err;
5803 err = ipw2100_set_fragmentation_threshold(
5804 priv, priv->frag_threshold, batch_mode);
5805 if (err)
5806 return err;
5809 IPW_DEBUG_INFO("exit\n");
5811 return 0;
5814 /*************************************************************************
5816 * EXTERNALLY CALLED METHODS
5818 *************************************************************************/
5820 /* This method is called by the network layer -- not to be confused with
5821 * ipw2100_set_mac_address() declared above called by this driver (and this
5822 * method as well) to talk to the firmware */
5823 static int ipw2100_set_address(struct net_device *dev, void *p)
5825 struct ipw2100_priv *priv = libipw_priv(dev);
5826 struct sockaddr *addr = p;
5827 int err = 0;
5829 if (!is_valid_ether_addr(addr->sa_data))
5830 return -EADDRNOTAVAIL;
5832 mutex_lock(&priv->action_mutex);
5834 priv->config |= CFG_CUSTOM_MAC;
5835 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5837 err = ipw2100_set_mac_address(priv, 0);
5838 if (err)
5839 goto done;
5841 priv->reset_backoff = 0;
5842 mutex_unlock(&priv->action_mutex);
5843 ipw2100_reset_adapter(&priv->reset_work.work);
5844 return 0;
5846 done:
5847 mutex_unlock(&priv->action_mutex);
5848 return err;
5851 static int ipw2100_open(struct net_device *dev)
5853 struct ipw2100_priv *priv = libipw_priv(dev);
5854 unsigned long flags;
5855 IPW_DEBUG_INFO("dev->open\n");
5857 spin_lock_irqsave(&priv->low_lock, flags);
5858 if (priv->status & STATUS_ASSOCIATED) {
5859 netif_carrier_on(dev);
5860 netif_start_queue(dev);
5862 spin_unlock_irqrestore(&priv->low_lock, flags);
5864 return 0;
5867 static int ipw2100_close(struct net_device *dev)
5869 struct ipw2100_priv *priv = libipw_priv(dev);
5870 unsigned long flags;
5871 struct list_head *element;
5872 struct ipw2100_tx_packet *packet;
5874 IPW_DEBUG_INFO("enter\n");
5876 spin_lock_irqsave(&priv->low_lock, flags);
5878 if (priv->status & STATUS_ASSOCIATED)
5879 netif_carrier_off(dev);
5880 netif_stop_queue(dev);
5882 /* Flush the TX queue ... */
5883 while (!list_empty(&priv->tx_pend_list)) {
5884 element = priv->tx_pend_list.next;
5885 packet = list_entry(element, struct ipw2100_tx_packet, list);
5887 list_del(element);
5888 DEC_STAT(&priv->tx_pend_stat);
5890 libipw_txb_free(packet->info.d_struct.txb);
5891 packet->info.d_struct.txb = NULL;
5893 list_add_tail(element, &priv->tx_free_list);
5894 INC_STAT(&priv->tx_free_stat);
5896 spin_unlock_irqrestore(&priv->low_lock, flags);
5898 IPW_DEBUG_INFO("exit\n");
5900 return 0;
5904 * TODO: Fix this function... its just wrong
5906 static void ipw2100_tx_timeout(struct net_device *dev)
5908 struct ipw2100_priv *priv = libipw_priv(dev);
5910 dev->stats.tx_errors++;
5912 #ifdef CONFIG_IPW2100_MONITOR
5913 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5914 return;
5915 #endif
5917 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5918 dev->name);
5919 schedule_reset(priv);
5922 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
5924 /* This is called when wpa_supplicant loads and closes the driver
5925 * interface. */
5926 priv->ieee->wpa_enabled = value;
5927 return 0;
5930 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
5933 struct libipw_device *ieee = priv->ieee;
5934 struct libipw_security sec = {
5935 .flags = SEC_AUTH_MODE,
5937 int ret = 0;
5939 if (value & IW_AUTH_ALG_SHARED_KEY) {
5940 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5941 ieee->open_wep = 0;
5942 } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
5943 sec.auth_mode = WLAN_AUTH_OPEN;
5944 ieee->open_wep = 1;
5945 } else if (value & IW_AUTH_ALG_LEAP) {
5946 sec.auth_mode = WLAN_AUTH_LEAP;
5947 ieee->open_wep = 1;
5948 } else
5949 return -EINVAL;
5951 if (ieee->set_security)
5952 ieee->set_security(ieee->dev, &sec);
5953 else
5954 ret = -EOPNOTSUPP;
5956 return ret;
5959 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5960 char *wpa_ie, int wpa_ie_len)
5963 struct ipw2100_wpa_assoc_frame frame;
5965 frame.fixed_ie_mask = 0;
5967 /* copy WPA IE */
5968 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5969 frame.var_ie_len = wpa_ie_len;
5971 /* make sure WPA is enabled */
5972 ipw2100_wpa_enable(priv, 1);
5973 ipw2100_set_wpa_ie(priv, &frame, 0);
5976 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
5977 struct ethtool_drvinfo *info)
5979 struct ipw2100_priv *priv = libipw_priv(dev);
5980 char fw_ver[64], ucode_ver[64];
5982 strcpy(info->driver, DRV_NAME);
5983 strcpy(info->version, DRV_VERSION);
5985 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
5986 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
5988 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
5989 fw_ver, priv->eeprom_version, ucode_ver);
5991 strcpy(info->bus_info, pci_name(priv->pci_dev));
5994 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
5996 struct ipw2100_priv *priv = libipw_priv(dev);
5997 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
6000 static const struct ethtool_ops ipw2100_ethtool_ops = {
6001 .get_link = ipw2100_ethtool_get_link,
6002 .get_drvinfo = ipw_ethtool_get_drvinfo,
6005 static void ipw2100_hang_check(struct work_struct *work)
6007 struct ipw2100_priv *priv =
6008 container_of(work, struct ipw2100_priv, hang_check.work);
6009 unsigned long flags;
6010 u32 rtc = 0xa5a5a5a5;
6011 u32 len = sizeof(rtc);
6012 int restart = 0;
6014 spin_lock_irqsave(&priv->low_lock, flags);
6016 if (priv->fatal_error != 0) {
6017 /* If fatal_error is set then we need to restart */
6018 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6019 priv->net_dev->name);
6021 restart = 1;
6022 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
6023 (rtc == priv->last_rtc)) {
6024 /* Check if firmware is hung */
6025 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6026 priv->net_dev->name);
6028 restart = 1;
6031 if (restart) {
6032 /* Kill timer */
6033 priv->stop_hang_check = 1;
6034 priv->hangs++;
6036 /* Restart the NIC */
6037 schedule_reset(priv);
6040 priv->last_rtc = rtc;
6042 if (!priv->stop_hang_check)
6043 schedule_delayed_work(&priv->hang_check, HZ / 2);
6045 spin_unlock_irqrestore(&priv->low_lock, flags);
6048 static void ipw2100_rf_kill(struct work_struct *work)
6050 struct ipw2100_priv *priv =
6051 container_of(work, struct ipw2100_priv, rf_kill.work);
6052 unsigned long flags;
6054 spin_lock_irqsave(&priv->low_lock, flags);
6056 if (rf_kill_active(priv)) {
6057 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6058 if (!priv->stop_rf_kill)
6059 schedule_delayed_work(&priv->rf_kill,
6060 round_jiffies_relative(HZ));
6061 goto exit_unlock;
6064 /* RF Kill is now disabled, so bring the device back up */
6066 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6067 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6068 "device\n");
6069 schedule_reset(priv);
6070 } else
6071 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6072 "enabled\n");
6074 exit_unlock:
6075 spin_unlock_irqrestore(&priv->low_lock, flags);
6078 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
6080 static const struct net_device_ops ipw2100_netdev_ops = {
6081 .ndo_open = ipw2100_open,
6082 .ndo_stop = ipw2100_close,
6083 .ndo_start_xmit = libipw_xmit,
6084 .ndo_change_mtu = libipw_change_mtu,
6085 .ndo_init = ipw2100_net_init,
6086 .ndo_tx_timeout = ipw2100_tx_timeout,
6087 .ndo_set_mac_address = ipw2100_set_address,
6088 .ndo_validate_addr = eth_validate_addr,
6091 /* Look into using netdev destructor to shutdown libipw? */
6093 static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
6094 void __iomem * base_addr,
6095 unsigned long mem_start,
6096 unsigned long mem_len)
6098 struct ipw2100_priv *priv;
6099 struct net_device *dev;
6101 dev = alloc_libipw(sizeof(struct ipw2100_priv), 0);
6102 if (!dev)
6103 return NULL;
6104 priv = libipw_priv(dev);
6105 priv->ieee = netdev_priv(dev);
6106 priv->pci_dev = pci_dev;
6107 priv->net_dev = dev;
6109 priv->ieee->hard_start_xmit = ipw2100_tx;
6110 priv->ieee->set_security = shim__set_security;
6112 priv->ieee->perfect_rssi = -20;
6113 priv->ieee->worst_rssi = -85;
6115 dev->netdev_ops = &ipw2100_netdev_ops;
6116 dev->ethtool_ops = &ipw2100_ethtool_ops;
6117 dev->wireless_handlers = &ipw2100_wx_handler_def;
6118 priv->wireless_data.libipw = priv->ieee;
6119 dev->wireless_data = &priv->wireless_data;
6120 dev->watchdog_timeo = 3 * HZ;
6121 dev->irq = 0;
6123 dev->base_addr = (unsigned long)base_addr;
6124 dev->mem_start = mem_start;
6125 dev->mem_end = dev->mem_start + mem_len - 1;
6127 /* NOTE: We don't use the wireless_handlers hook
6128 * in dev as the system will start throwing WX requests
6129 * to us before we're actually initialized and it just
6130 * ends up causing problems. So, we just handle
6131 * the WX extensions through the ipw2100_ioctl interface */
6133 /* memset() puts everything to 0, so we only have explicitly set
6134 * those values that need to be something else */
6136 /* If power management is turned on, default to AUTO mode */
6137 priv->power_mode = IPW_POWER_AUTO;
6139 #ifdef CONFIG_IPW2100_MONITOR
6140 priv->config |= CFG_CRC_CHECK;
6141 #endif
6142 priv->ieee->wpa_enabled = 0;
6143 priv->ieee->drop_unencrypted = 0;
6144 priv->ieee->privacy_invoked = 0;
6145 priv->ieee->ieee802_1x = 1;
6147 /* Set module parameters */
6148 switch (network_mode) {
6149 case 1:
6150 priv->ieee->iw_mode = IW_MODE_ADHOC;
6151 break;
6152 #ifdef CONFIG_IPW2100_MONITOR
6153 case 2:
6154 priv->ieee->iw_mode = IW_MODE_MONITOR;
6155 break;
6156 #endif
6157 default:
6158 case 0:
6159 priv->ieee->iw_mode = IW_MODE_INFRA;
6160 break;
6163 if (disable == 1)
6164 priv->status |= STATUS_RF_KILL_SW;
6166 if (channel != 0 &&
6167 ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) {
6168 priv->config |= CFG_STATIC_CHANNEL;
6169 priv->channel = channel;
6172 if (associate)
6173 priv->config |= CFG_ASSOCIATE;
6175 priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
6176 priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
6177 priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
6178 priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
6179 priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
6180 priv->tx_power = IPW_TX_POWER_DEFAULT;
6181 priv->tx_rates = DEFAULT_TX_RATES;
6183 strcpy(priv->nick, "ipw2100");
6185 spin_lock_init(&priv->low_lock);
6186 mutex_init(&priv->action_mutex);
6187 mutex_init(&priv->adapter_mutex);
6189 init_waitqueue_head(&priv->wait_command_queue);
6191 netif_carrier_off(dev);
6193 INIT_LIST_HEAD(&priv->msg_free_list);
6194 INIT_LIST_HEAD(&priv->msg_pend_list);
6195 INIT_STAT(&priv->msg_free_stat);
6196 INIT_STAT(&priv->msg_pend_stat);
6198 INIT_LIST_HEAD(&priv->tx_free_list);
6199 INIT_LIST_HEAD(&priv->tx_pend_list);
6200 INIT_STAT(&priv->tx_free_stat);
6201 INIT_STAT(&priv->tx_pend_stat);
6203 INIT_LIST_HEAD(&priv->fw_pend_list);
6204 INIT_STAT(&priv->fw_pend_stat);
6206 INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter);
6207 INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work);
6208 INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work);
6209 INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check);
6210 INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
6211 INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now);
6212 INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later);
6214 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
6215 ipw2100_irq_tasklet, (unsigned long)priv);
6217 /* NOTE: We do not start the deferred work for status checks yet */
6218 priv->stop_rf_kill = 1;
6219 priv->stop_hang_check = 1;
6221 return dev;
6224 static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
6225 const struct pci_device_id *ent)
6227 unsigned long mem_start, mem_len, mem_flags;
6228 void __iomem *base_addr = NULL;
6229 struct net_device *dev = NULL;
6230 struct ipw2100_priv *priv = NULL;
6231 int err = 0;
6232 int registered = 0;
6233 u32 val;
6235 IPW_DEBUG_INFO("enter\n");
6237 mem_start = pci_resource_start(pci_dev, 0);
6238 mem_len = pci_resource_len(pci_dev, 0);
6239 mem_flags = pci_resource_flags(pci_dev, 0);
6241 if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
6242 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6243 err = -ENODEV;
6244 goto fail;
6247 base_addr = ioremap_nocache(mem_start, mem_len);
6248 if (!base_addr) {
6249 printk(KERN_WARNING DRV_NAME
6250 "Error calling ioremap_nocache.\n");
6251 err = -EIO;
6252 goto fail;
6255 /* allocate and initialize our net_device */
6256 dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
6257 if (!dev) {
6258 printk(KERN_WARNING DRV_NAME
6259 "Error calling ipw2100_alloc_device.\n");
6260 err = -ENOMEM;
6261 goto fail;
6264 /* set up PCI mappings for device */
6265 err = pci_enable_device(pci_dev);
6266 if (err) {
6267 printk(KERN_WARNING DRV_NAME
6268 "Error calling pci_enable_device.\n");
6269 return err;
6272 priv = libipw_priv(dev);
6274 pci_set_master(pci_dev);
6275 pci_set_drvdata(pci_dev, priv);
6277 err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
6278 if (err) {
6279 printk(KERN_WARNING DRV_NAME
6280 "Error calling pci_set_dma_mask.\n");
6281 pci_disable_device(pci_dev);
6282 return err;
6285 err = pci_request_regions(pci_dev, DRV_NAME);
6286 if (err) {
6287 printk(KERN_WARNING DRV_NAME
6288 "Error calling pci_request_regions.\n");
6289 pci_disable_device(pci_dev);
6290 return err;
6293 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6294 * PCI Tx retries from interfering with C3 CPU state */
6295 pci_read_config_dword(pci_dev, 0x40, &val);
6296 if ((val & 0x0000ff00) != 0)
6297 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6299 pci_set_power_state(pci_dev, PCI_D0);
6301 if (!ipw2100_hw_is_adapter_in_system(dev)) {
6302 printk(KERN_WARNING DRV_NAME
6303 "Device not found via register read.\n");
6304 err = -ENODEV;
6305 goto fail;
6308 SET_NETDEV_DEV(dev, &pci_dev->dev);
6310 /* Force interrupts to be shut off on the device */
6311 priv->status |= STATUS_INT_ENABLED;
6312 ipw2100_disable_interrupts(priv);
6314 /* Allocate and initialize the Tx/Rx queues and lists */
6315 if (ipw2100_queues_allocate(priv)) {
6316 printk(KERN_WARNING DRV_NAME
6317 "Error calling ipw2100_queues_allocate.\n");
6318 err = -ENOMEM;
6319 goto fail;
6321 ipw2100_queues_initialize(priv);
6323 err = request_irq(pci_dev->irq,
6324 ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
6325 if (err) {
6326 printk(KERN_WARNING DRV_NAME
6327 "Error calling request_irq: %d.\n", pci_dev->irq);
6328 goto fail;
6330 dev->irq = pci_dev->irq;
6332 IPW_DEBUG_INFO("Attempting to register device...\n");
6334 printk(KERN_INFO DRV_NAME
6335 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6337 /* Bring up the interface. Pre 0.46, after we registered the
6338 * network device we would call ipw2100_up. This introduced a race
6339 * condition with newer hotplug configurations (network was coming
6340 * up and making calls before the device was initialized).
6342 * If we called ipw2100_up before we registered the device, then the
6343 * device name wasn't registered. So, we instead use the net_dev->init
6344 * member to call a function that then just turns and calls ipw2100_up.
6345 * net_dev->init is called after name allocation but before the
6346 * notifier chain is called */
6347 err = register_netdev(dev);
6348 if (err) {
6349 printk(KERN_WARNING DRV_NAME
6350 "Error calling register_netdev.\n");
6351 goto fail;
6354 mutex_lock(&priv->action_mutex);
6355 registered = 1;
6357 IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
6359 /* perform this after register_netdev so that dev->name is set */
6360 err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6361 if (err)
6362 goto fail_unlock;
6364 /* If the RF Kill switch is disabled, go ahead and complete the
6365 * startup sequence */
6366 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6367 /* Enable the adapter - sends HOST_COMPLETE */
6368 if (ipw2100_enable_adapter(priv)) {
6369 printk(KERN_WARNING DRV_NAME
6370 ": %s: failed in call to enable adapter.\n",
6371 priv->net_dev->name);
6372 ipw2100_hw_stop_adapter(priv);
6373 err = -EIO;
6374 goto fail_unlock;
6377 /* Start a scan . . . */
6378 ipw2100_set_scan_options(priv);
6379 ipw2100_start_scan(priv);
6382 IPW_DEBUG_INFO("exit\n");
6384 priv->status |= STATUS_INITIALIZED;
6386 mutex_unlock(&priv->action_mutex);
6388 return 0;
6390 fail_unlock:
6391 mutex_unlock(&priv->action_mutex);
6393 fail:
6394 if (dev) {
6395 if (registered)
6396 unregister_netdev(dev);
6398 ipw2100_hw_stop_adapter(priv);
6400 ipw2100_disable_interrupts(priv);
6402 if (dev->irq)
6403 free_irq(dev->irq, priv);
6405 ipw2100_kill_works(priv);
6407 /* These are safe to call even if they weren't allocated */
6408 ipw2100_queues_free(priv);
6409 sysfs_remove_group(&pci_dev->dev.kobj,
6410 &ipw2100_attribute_group);
6412 free_libipw(dev, 0);
6413 pci_set_drvdata(pci_dev, NULL);
6416 if (base_addr)
6417 iounmap(base_addr);
6419 pci_release_regions(pci_dev);
6420 pci_disable_device(pci_dev);
6422 return err;
6425 static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
6427 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6428 struct net_device *dev;
6430 if (priv) {
6431 mutex_lock(&priv->action_mutex);
6433 priv->status &= ~STATUS_INITIALIZED;
6435 dev = priv->net_dev;
6436 sysfs_remove_group(&pci_dev->dev.kobj,
6437 &ipw2100_attribute_group);
6439 #ifdef CONFIG_PM
6440 if (ipw2100_firmware.version)
6441 ipw2100_release_firmware(priv, &ipw2100_firmware);
6442 #endif
6443 /* Take down the hardware */
6444 ipw2100_down(priv);
6446 /* Release the mutex so that the network subsystem can
6447 * complete any needed calls into the driver... */
6448 mutex_unlock(&priv->action_mutex);
6450 /* Unregister the device first - this results in close()
6451 * being called if the device is open. If we free storage
6452 * first, then close() will crash. */
6453 unregister_netdev(dev);
6455 ipw2100_kill_works(priv);
6457 ipw2100_queues_free(priv);
6459 /* Free potential debugging firmware snapshot */
6460 ipw2100_snapshot_free(priv);
6462 if (dev->irq)
6463 free_irq(dev->irq, priv);
6465 if (dev->base_addr)
6466 iounmap((void __iomem *)dev->base_addr);
6468 /* wiphy_unregister needs to be here, before free_libipw */
6469 wiphy_unregister(priv->ieee->wdev.wiphy);
6470 kfree(priv->ieee->bg_band.channels);
6471 free_libipw(dev, 0);
6474 pci_release_regions(pci_dev);
6475 pci_disable_device(pci_dev);
6477 IPW_DEBUG_INFO("exit\n");
6480 #ifdef CONFIG_PM
6481 static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
6483 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6484 struct net_device *dev = priv->net_dev;
6486 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name);
6488 mutex_lock(&priv->action_mutex);
6489 if (priv->status & STATUS_INITIALIZED) {
6490 /* Take down the device; powers it off, etc. */
6491 ipw2100_down(priv);
6494 /* Remove the PRESENT state of the device */
6495 netif_device_detach(dev);
6497 pci_save_state(pci_dev);
6498 pci_disable_device(pci_dev);
6499 pci_set_power_state(pci_dev, PCI_D3hot);
6501 priv->suspend_at = get_seconds();
6503 mutex_unlock(&priv->action_mutex);
6505 return 0;
6508 static int ipw2100_resume(struct pci_dev *pci_dev)
6510 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6511 struct net_device *dev = priv->net_dev;
6512 int err;
6513 u32 val;
6515 if (IPW2100_PM_DISABLED)
6516 return 0;
6518 mutex_lock(&priv->action_mutex);
6520 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name);
6522 pci_set_power_state(pci_dev, PCI_D0);
6523 err = pci_enable_device(pci_dev);
6524 if (err) {
6525 printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
6526 dev->name);
6527 mutex_unlock(&priv->action_mutex);
6528 return err;
6530 pci_restore_state(pci_dev);
6533 * Suspend/Resume resets the PCI configuration space, so we have to
6534 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6535 * from interfering with C3 CPU state. pci_restore_state won't help
6536 * here since it only restores the first 64 bytes pci config header.
6538 pci_read_config_dword(pci_dev, 0x40, &val);
6539 if ((val & 0x0000ff00) != 0)
6540 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6542 /* Set the device back into the PRESENT state; this will also wake
6543 * the queue of needed */
6544 netif_device_attach(dev);
6546 priv->suspend_time = get_seconds() - priv->suspend_at;
6548 /* Bring the device back up */
6549 if (!(priv->status & STATUS_RF_KILL_SW))
6550 ipw2100_up(priv, 0);
6552 mutex_unlock(&priv->action_mutex);
6554 return 0;
6556 #endif
6558 static void ipw2100_shutdown(struct pci_dev *pci_dev)
6560 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6562 /* Take down the device; powers it off, etc. */
6563 ipw2100_down(priv);
6565 pci_disable_device(pci_dev);
6568 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6570 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table) = {
6571 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6572 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6573 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6574 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6575 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6576 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6577 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6578 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6579 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6580 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6581 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6582 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6583 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6585 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6586 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6587 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6588 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6589 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6591 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6592 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6593 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6594 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6595 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6596 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6597 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6599 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6601 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6602 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6603 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6604 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6605 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6606 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6607 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6609 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6610 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6611 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6612 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6613 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6614 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6616 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6617 {0,},
6620 MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
6622 static struct pci_driver ipw2100_pci_driver = {
6623 .name = DRV_NAME,
6624 .id_table = ipw2100_pci_id_table,
6625 .probe = ipw2100_pci_init_one,
6626 .remove = __devexit_p(ipw2100_pci_remove_one),
6627 #ifdef CONFIG_PM
6628 .suspend = ipw2100_suspend,
6629 .resume = ipw2100_resume,
6630 #endif
6631 .shutdown = ipw2100_shutdown,
6635 * Initialize the ipw2100 driver/module
6637 * @returns 0 if ok, < 0 errno node con error.
6639 * Note: we cannot init the /proc stuff until the PCI driver is there,
6640 * or we risk an unlikely race condition on someone accessing
6641 * uninitialized data in the PCI dev struct through /proc.
6643 static int __init ipw2100_init(void)
6645 int ret;
6647 printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
6648 printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
6650 pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
6651 PM_QOS_DEFAULT_VALUE);
6653 ret = pci_register_driver(&ipw2100_pci_driver);
6654 if (ret)
6655 goto out;
6657 #ifdef CONFIG_IPW2100_DEBUG
6658 ipw2100_debug_level = debug;
6659 ret = driver_create_file(&ipw2100_pci_driver.driver,
6660 &driver_attr_debug_level);
6661 #endif
6663 out:
6664 return ret;
6668 * Cleanup ipw2100 driver registration
6670 static void __exit ipw2100_exit(void)
6672 /* FIXME: IPG: check that we have no instances of the devices open */
6673 #ifdef CONFIG_IPW2100_DEBUG
6674 driver_remove_file(&ipw2100_pci_driver.driver,
6675 &driver_attr_debug_level);
6676 #endif
6677 pci_unregister_driver(&ipw2100_pci_driver);
6678 pm_qos_remove_request(&ipw2100_pm_qos_req);
6681 module_init(ipw2100_init);
6682 module_exit(ipw2100_exit);
6684 static int ipw2100_wx_get_name(struct net_device *dev,
6685 struct iw_request_info *info,
6686 union iwreq_data *wrqu, char *extra)
6689 * This can be called at any time. No action lock required
6692 struct ipw2100_priv *priv = libipw_priv(dev);
6693 if (!(priv->status & STATUS_ASSOCIATED))
6694 strcpy(wrqu->name, "unassociated");
6695 else
6696 snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
6698 IPW_DEBUG_WX("Name: %s\n", wrqu->name);
6699 return 0;
6702 static int ipw2100_wx_set_freq(struct net_device *dev,
6703 struct iw_request_info *info,
6704 union iwreq_data *wrqu, char *extra)
6706 struct ipw2100_priv *priv = libipw_priv(dev);
6707 struct iw_freq *fwrq = &wrqu->freq;
6708 int err = 0;
6710 if (priv->ieee->iw_mode == IW_MODE_INFRA)
6711 return -EOPNOTSUPP;
6713 mutex_lock(&priv->action_mutex);
6714 if (!(priv->status & STATUS_INITIALIZED)) {
6715 err = -EIO;
6716 goto done;
6719 /* if setting by freq convert to channel */
6720 if (fwrq->e == 1) {
6721 if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) {
6722 int f = fwrq->m / 100000;
6723 int c = 0;
6725 while ((c < REG_MAX_CHANNEL) &&
6726 (f != ipw2100_frequencies[c]))
6727 c++;
6729 /* hack to fall through */
6730 fwrq->e = 0;
6731 fwrq->m = c + 1;
6735 if (fwrq->e > 0 || fwrq->m > 1000) {
6736 err = -EOPNOTSUPP;
6737 goto done;
6738 } else { /* Set the channel */
6739 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq->m);
6740 err = ipw2100_set_channel(priv, fwrq->m, 0);
6743 done:
6744 mutex_unlock(&priv->action_mutex);
6745 return err;
6748 static int ipw2100_wx_get_freq(struct net_device *dev,
6749 struct iw_request_info *info,
6750 union iwreq_data *wrqu, char *extra)
6753 * This can be called at any time. No action lock required
6756 struct ipw2100_priv *priv = libipw_priv(dev);
6758 wrqu->freq.e = 0;
6760 /* If we are associated, trying to associate, or have a statically
6761 * configured CHANNEL then return that; otherwise return ANY */
6762 if (priv->config & CFG_STATIC_CHANNEL ||
6763 priv->status & STATUS_ASSOCIATED)
6764 wrqu->freq.m = priv->channel;
6765 else
6766 wrqu->freq.m = 0;
6768 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv->channel);
6769 return 0;
6773 static int ipw2100_wx_set_mode(struct net_device *dev,
6774 struct iw_request_info *info,
6775 union iwreq_data *wrqu, char *extra)
6777 struct ipw2100_priv *priv = libipw_priv(dev);
6778 int err = 0;
6780 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu->mode);
6782 if (wrqu->mode == priv->ieee->iw_mode)
6783 return 0;
6785 mutex_lock(&priv->action_mutex);
6786 if (!(priv->status & STATUS_INITIALIZED)) {
6787 err = -EIO;
6788 goto done;
6791 switch (wrqu->mode) {
6792 #ifdef CONFIG_IPW2100_MONITOR
6793 case IW_MODE_MONITOR:
6794 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
6795 break;
6796 #endif /* CONFIG_IPW2100_MONITOR */
6797 case IW_MODE_ADHOC:
6798 err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
6799 break;
6800 case IW_MODE_INFRA:
6801 case IW_MODE_AUTO:
6802 default:
6803 err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
6804 break;
6807 done:
6808 mutex_unlock(&priv->action_mutex);
6809 return err;
6812 static int ipw2100_wx_get_mode(struct net_device *dev,
6813 struct iw_request_info *info,
6814 union iwreq_data *wrqu, char *extra)
6817 * This can be called at any time. No action lock required
6820 struct ipw2100_priv *priv = libipw_priv(dev);
6822 wrqu->mode = priv->ieee->iw_mode;
6823 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
6825 return 0;
6828 #define POWER_MODES 5
6830 /* Values are in microsecond */
6831 static const s32 timeout_duration[POWER_MODES] = {
6832 350000,
6833 250000,
6834 75000,
6835 37000,
6836 25000,
6839 static const s32 period_duration[POWER_MODES] = {
6840 400000,
6841 700000,
6842 1000000,
6843 1000000,
6844 1000000
6847 static int ipw2100_wx_get_range(struct net_device *dev,
6848 struct iw_request_info *info,
6849 union iwreq_data *wrqu, char *extra)
6852 * This can be called at any time. No action lock required
6855 struct ipw2100_priv *priv = libipw_priv(dev);
6856 struct iw_range *range = (struct iw_range *)extra;
6857 u16 val;
6858 int i, level;
6860 wrqu->data.length = sizeof(*range);
6861 memset(range, 0, sizeof(*range));
6863 /* Let's try to keep this struct in the same order as in
6864 * linux/include/wireless.h
6867 /* TODO: See what values we can set, and remove the ones we can't
6868 * set, or fill them with some default data.
6871 /* ~5 Mb/s real (802.11b) */
6872 range->throughput = 5 * 1000 * 1000;
6874 // range->sensitivity; /* signal level threshold range */
6876 range->max_qual.qual = 100;
6877 /* TODO: Find real max RSSI and stick here */
6878 range->max_qual.level = 0;
6879 range->max_qual.noise = 0;
6880 range->max_qual.updated = 7; /* Updated all three */
6882 range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
6883 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6884 range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
6885 range->avg_qual.noise = 0;
6886 range->avg_qual.updated = 7; /* Updated all three */
6888 range->num_bitrates = RATE_COUNT;
6890 for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
6891 range->bitrate[i] = ipw2100_rates_11b[i];
6894 range->min_rts = MIN_RTS_THRESHOLD;
6895 range->max_rts = MAX_RTS_THRESHOLD;
6896 range->min_frag = MIN_FRAG_THRESHOLD;
6897 range->max_frag = MAX_FRAG_THRESHOLD;
6899 range->min_pmp = period_duration[0]; /* Minimal PM period */
6900 range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */
6901 range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */
6902 range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */
6904 /* How to decode max/min PM period */
6905 range->pmp_flags = IW_POWER_PERIOD;
6906 /* How to decode max/min PM period */
6907 range->pmt_flags = IW_POWER_TIMEOUT;
6908 /* What PM options are supported */
6909 range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
6911 range->encoding_size[0] = 5;
6912 range->encoding_size[1] = 13; /* Different token sizes */
6913 range->num_encoding_sizes = 2; /* Number of entry in the list */
6914 range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
6915 // range->encoding_login_index; /* token index for login token */
6917 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
6918 range->txpower_capa = IW_TXPOW_DBM;
6919 range->num_txpower = IW_MAX_TXPOWER;
6920 for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16);
6921 i < IW_MAX_TXPOWER;
6922 i++, level -=
6923 ((IPW_TX_POWER_MAX_DBM -
6924 IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1))
6925 range->txpower[i] = level / 16;
6926 } else {
6927 range->txpower_capa = 0;
6928 range->num_txpower = 0;
6931 /* Set the Wireless Extension versions */
6932 range->we_version_compiled = WIRELESS_EXT;
6933 range->we_version_source = 18;
6935 // range->retry_capa; /* What retry options are supported */
6936 // range->retry_flags; /* How to decode max/min retry limit */
6937 // range->r_time_flags; /* How to decode max/min retry life */
6938 // range->min_retry; /* Minimal number of retries */
6939 // range->max_retry; /* Maximal number of retries */
6940 // range->min_r_time; /* Minimal retry lifetime */
6941 // range->max_r_time; /* Maximal retry lifetime */
6943 range->num_channels = FREQ_COUNT;
6945 val = 0;
6946 for (i = 0; i < FREQ_COUNT; i++) {
6947 // TODO: Include only legal frequencies for some countries
6948 // if (local->channel_mask & (1 << i)) {
6949 range->freq[val].i = i + 1;
6950 range->freq[val].m = ipw2100_frequencies[i] * 100000;
6951 range->freq[val].e = 1;
6952 val++;
6953 // }
6954 if (val == IW_MAX_FREQUENCIES)
6955 break;
6957 range->num_frequency = val;
6959 /* Event capability (kernel + driver) */
6960 range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
6961 IW_EVENT_CAPA_MASK(SIOCGIWAP));
6962 range->event_capa[1] = IW_EVENT_CAPA_K_1;
6964 range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
6965 IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
6967 IPW_DEBUG_WX("GET Range\n");
6969 return 0;
6972 static int ipw2100_wx_set_wap(struct net_device *dev,
6973 struct iw_request_info *info,
6974 union iwreq_data *wrqu, char *extra)
6976 struct ipw2100_priv *priv = libipw_priv(dev);
6977 int err = 0;
6979 static const unsigned char any[] = {
6980 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6982 static const unsigned char off[] = {
6983 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6986 // sanity checks
6987 if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
6988 return -EINVAL;
6990 mutex_lock(&priv->action_mutex);
6991 if (!(priv->status & STATUS_INITIALIZED)) {
6992 err = -EIO;
6993 goto done;
6996 if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
6997 !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
6998 /* we disable mandatory BSSID association */
6999 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
7000 priv->config &= ~CFG_STATIC_BSSID;
7001 err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
7002 goto done;
7005 priv->config |= CFG_STATIC_BSSID;
7006 memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
7008 err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
7010 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu->ap_addr.sa_data);
7012 done:
7013 mutex_unlock(&priv->action_mutex);
7014 return err;
7017 static int ipw2100_wx_get_wap(struct net_device *dev,
7018 struct iw_request_info *info,
7019 union iwreq_data *wrqu, char *extra)
7022 * This can be called at any time. No action lock required
7025 struct ipw2100_priv *priv = libipw_priv(dev);
7027 /* If we are associated, trying to associate, or have a statically
7028 * configured BSSID then return that; otherwise return ANY */
7029 if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) {
7030 wrqu->ap_addr.sa_family = ARPHRD_ETHER;
7031 memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN);
7032 } else
7033 memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
7035 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu->ap_addr.sa_data);
7036 return 0;
7039 static int ipw2100_wx_set_essid(struct net_device *dev,
7040 struct iw_request_info *info,
7041 union iwreq_data *wrqu, char *extra)
7043 struct ipw2100_priv *priv = libipw_priv(dev);
7044 char *essid = ""; /* ANY */
7045 int length = 0;
7046 int err = 0;
7047 DECLARE_SSID_BUF(ssid);
7049 mutex_lock(&priv->action_mutex);
7050 if (!(priv->status & STATUS_INITIALIZED)) {
7051 err = -EIO;
7052 goto done;
7055 if (wrqu->essid.flags && wrqu->essid.length) {
7056 length = wrqu->essid.length;
7057 essid = extra;
7060 if (length == 0) {
7061 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7062 priv->config &= ~CFG_STATIC_ESSID;
7063 err = ipw2100_set_essid(priv, NULL, 0, 0);
7064 goto done;
7067 length = min(length, IW_ESSID_MAX_SIZE);
7069 priv->config |= CFG_STATIC_ESSID;
7071 if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
7072 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7073 err = 0;
7074 goto done;
7077 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7078 print_ssid(ssid, essid, length), length);
7080 priv->essid_len = length;
7081 memcpy(priv->essid, essid, priv->essid_len);
7083 err = ipw2100_set_essid(priv, essid, length, 0);
7085 done:
7086 mutex_unlock(&priv->action_mutex);
7087 return err;
7090 static int ipw2100_wx_get_essid(struct net_device *dev,
7091 struct iw_request_info *info,
7092 union iwreq_data *wrqu, char *extra)
7095 * This can be called at any time. No action lock required
7098 struct ipw2100_priv *priv = libipw_priv(dev);
7099 DECLARE_SSID_BUF(ssid);
7101 /* If we are associated, trying to associate, or have a statically
7102 * configured ESSID then return that; otherwise return ANY */
7103 if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
7104 IPW_DEBUG_WX("Getting essid: '%s'\n",
7105 print_ssid(ssid, priv->essid, priv->essid_len));
7106 memcpy(extra, priv->essid, priv->essid_len);
7107 wrqu->essid.length = priv->essid_len;
7108 wrqu->essid.flags = 1; /* active */
7109 } else {
7110 IPW_DEBUG_WX("Getting essid: ANY\n");
7111 wrqu->essid.length = 0;
7112 wrqu->essid.flags = 0; /* active */
7115 return 0;
7118 static int ipw2100_wx_set_nick(struct net_device *dev,
7119 struct iw_request_info *info,
7120 union iwreq_data *wrqu, char *extra)
7123 * This can be called at any time. No action lock required
7126 struct ipw2100_priv *priv = libipw_priv(dev);
7128 if (wrqu->data.length > IW_ESSID_MAX_SIZE)
7129 return -E2BIG;
7131 wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
7132 memset(priv->nick, 0, sizeof(priv->nick));
7133 memcpy(priv->nick, extra, wrqu->data.length);
7135 IPW_DEBUG_WX("SET Nickname -> %s\n", priv->nick);
7137 return 0;
7140 static int ipw2100_wx_get_nick(struct net_device *dev,
7141 struct iw_request_info *info,
7142 union iwreq_data *wrqu, char *extra)
7145 * This can be called at any time. No action lock required
7148 struct ipw2100_priv *priv = libipw_priv(dev);
7150 wrqu->data.length = strlen(priv->nick);
7151 memcpy(extra, priv->nick, wrqu->data.length);
7152 wrqu->data.flags = 1; /* active */
7154 IPW_DEBUG_WX("GET Nickname -> %s\n", extra);
7156 return 0;
7159 static int ipw2100_wx_set_rate(struct net_device *dev,
7160 struct iw_request_info *info,
7161 union iwreq_data *wrqu, char *extra)
7163 struct ipw2100_priv *priv = libipw_priv(dev);
7164 u32 target_rate = wrqu->bitrate.value;
7165 u32 rate;
7166 int err = 0;
7168 mutex_lock(&priv->action_mutex);
7169 if (!(priv->status & STATUS_INITIALIZED)) {
7170 err = -EIO;
7171 goto done;
7174 rate = 0;
7176 if (target_rate == 1000000 ||
7177 (!wrqu->bitrate.fixed && target_rate > 1000000))
7178 rate |= TX_RATE_1_MBIT;
7179 if (target_rate == 2000000 ||
7180 (!wrqu->bitrate.fixed && target_rate > 2000000))
7181 rate |= TX_RATE_2_MBIT;
7182 if (target_rate == 5500000 ||
7183 (!wrqu->bitrate.fixed && target_rate > 5500000))
7184 rate |= TX_RATE_5_5_MBIT;
7185 if (target_rate == 11000000 ||
7186 (!wrqu->bitrate.fixed && target_rate > 11000000))
7187 rate |= TX_RATE_11_MBIT;
7188 if (rate == 0)
7189 rate = DEFAULT_TX_RATES;
7191 err = ipw2100_set_tx_rates(priv, rate, 0);
7193 IPW_DEBUG_WX("SET Rate -> %04X\n", rate);
7194 done:
7195 mutex_unlock(&priv->action_mutex);
7196 return err;
7199 static int ipw2100_wx_get_rate(struct net_device *dev,
7200 struct iw_request_info *info,
7201 union iwreq_data *wrqu, char *extra)
7203 struct ipw2100_priv *priv = libipw_priv(dev);
7204 int val;
7205 unsigned int len = sizeof(val);
7206 int err = 0;
7208 if (!(priv->status & STATUS_ENABLED) ||
7209 priv->status & STATUS_RF_KILL_MASK ||
7210 !(priv->status & STATUS_ASSOCIATED)) {
7211 wrqu->bitrate.value = 0;
7212 return 0;
7215 mutex_lock(&priv->action_mutex);
7216 if (!(priv->status & STATUS_INITIALIZED)) {
7217 err = -EIO;
7218 goto done;
7221 err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
7222 if (err) {
7223 IPW_DEBUG_WX("failed querying ordinals.\n");
7224 goto done;
7227 switch (val & TX_RATE_MASK) {
7228 case TX_RATE_1_MBIT:
7229 wrqu->bitrate.value = 1000000;
7230 break;
7231 case TX_RATE_2_MBIT:
7232 wrqu->bitrate.value = 2000000;
7233 break;
7234 case TX_RATE_5_5_MBIT:
7235 wrqu->bitrate.value = 5500000;
7236 break;
7237 case TX_RATE_11_MBIT:
7238 wrqu->bitrate.value = 11000000;
7239 break;
7240 default:
7241 wrqu->bitrate.value = 0;
7244 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu->bitrate.value);
7246 done:
7247 mutex_unlock(&priv->action_mutex);
7248 return err;
7251 static int ipw2100_wx_set_rts(struct net_device *dev,
7252 struct iw_request_info *info,
7253 union iwreq_data *wrqu, char *extra)
7255 struct ipw2100_priv *priv = libipw_priv(dev);
7256 int value, err;
7258 /* Auto RTS not yet supported */
7259 if (wrqu->rts.fixed == 0)
7260 return -EINVAL;
7262 mutex_lock(&priv->action_mutex);
7263 if (!(priv->status & STATUS_INITIALIZED)) {
7264 err = -EIO;
7265 goto done;
7268 if (wrqu->rts.disabled)
7269 value = priv->rts_threshold | RTS_DISABLED;
7270 else {
7271 if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) {
7272 err = -EINVAL;
7273 goto done;
7275 value = wrqu->rts.value;
7278 err = ipw2100_set_rts_threshold(priv, value);
7280 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value);
7281 done:
7282 mutex_unlock(&priv->action_mutex);
7283 return err;
7286 static int ipw2100_wx_get_rts(struct net_device *dev,
7287 struct iw_request_info *info,
7288 union iwreq_data *wrqu, char *extra)
7291 * This can be called at any time. No action lock required
7294 struct ipw2100_priv *priv = libipw_priv(dev);
7296 wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
7297 wrqu->rts.fixed = 1; /* no auto select */
7299 /* If RTS is set to the default value, then it is disabled */
7300 wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
7302 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu->rts.value);
7304 return 0;
7307 static int ipw2100_wx_set_txpow(struct net_device *dev,
7308 struct iw_request_info *info,
7309 union iwreq_data *wrqu, char *extra)
7311 struct ipw2100_priv *priv = libipw_priv(dev);
7312 int err = 0, value;
7314 if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
7315 return -EINPROGRESS;
7317 if (priv->ieee->iw_mode != IW_MODE_ADHOC)
7318 return 0;
7320 if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
7321 return -EINVAL;
7323 if (wrqu->txpower.fixed == 0)
7324 value = IPW_TX_POWER_DEFAULT;
7325 else {
7326 if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
7327 wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
7328 return -EINVAL;
7330 value = wrqu->txpower.value;
7333 mutex_lock(&priv->action_mutex);
7334 if (!(priv->status & STATUS_INITIALIZED)) {
7335 err = -EIO;
7336 goto done;
7339 err = ipw2100_set_tx_power(priv, value);
7341 IPW_DEBUG_WX("SET TX Power -> %d\n", value);
7343 done:
7344 mutex_unlock(&priv->action_mutex);
7345 return err;
7348 static int ipw2100_wx_get_txpow(struct net_device *dev,
7349 struct iw_request_info *info,
7350 union iwreq_data *wrqu, char *extra)
7353 * This can be called at any time. No action lock required
7356 struct ipw2100_priv *priv = libipw_priv(dev);
7358 wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
7360 if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
7361 wrqu->txpower.fixed = 0;
7362 wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
7363 } else {
7364 wrqu->txpower.fixed = 1;
7365 wrqu->txpower.value = priv->tx_power;
7368 wrqu->txpower.flags = IW_TXPOW_DBM;
7370 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu->txpower.value);
7372 return 0;
7375 static int ipw2100_wx_set_frag(struct net_device *dev,
7376 struct iw_request_info *info,
7377 union iwreq_data *wrqu, char *extra)
7380 * This can be called at any time. No action lock required
7383 struct ipw2100_priv *priv = libipw_priv(dev);
7385 if (!wrqu->frag.fixed)
7386 return -EINVAL;
7388 if (wrqu->frag.disabled) {
7389 priv->frag_threshold |= FRAG_DISABLED;
7390 priv->ieee->fts = DEFAULT_FTS;
7391 } else {
7392 if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
7393 wrqu->frag.value > MAX_FRAG_THRESHOLD)
7394 return -EINVAL;
7396 priv->ieee->fts = wrqu->frag.value & ~0x1;
7397 priv->frag_threshold = priv->ieee->fts;
7400 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv->ieee->fts);
7402 return 0;
7405 static int ipw2100_wx_get_frag(struct net_device *dev,
7406 struct iw_request_info *info,
7407 union iwreq_data *wrqu, char *extra)
7410 * This can be called at any time. No action lock required
7413 struct ipw2100_priv *priv = libipw_priv(dev);
7414 wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
7415 wrqu->frag.fixed = 0; /* no auto select */
7416 wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
7418 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu->frag.value);
7420 return 0;
7423 static int ipw2100_wx_set_retry(struct net_device *dev,
7424 struct iw_request_info *info,
7425 union iwreq_data *wrqu, char *extra)
7427 struct ipw2100_priv *priv = libipw_priv(dev);
7428 int err = 0;
7430 if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
7431 return -EINVAL;
7433 if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
7434 return 0;
7436 mutex_lock(&priv->action_mutex);
7437 if (!(priv->status & STATUS_INITIALIZED)) {
7438 err = -EIO;
7439 goto done;
7442 if (wrqu->retry.flags & IW_RETRY_SHORT) {
7443 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7444 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7445 wrqu->retry.value);
7446 goto done;
7449 if (wrqu->retry.flags & IW_RETRY_LONG) {
7450 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7451 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7452 wrqu->retry.value);
7453 goto done;
7456 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7457 if (!err)
7458 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7460 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu->retry.value);
7462 done:
7463 mutex_unlock(&priv->action_mutex);
7464 return err;
7467 static int ipw2100_wx_get_retry(struct net_device *dev,
7468 struct iw_request_info *info,
7469 union iwreq_data *wrqu, char *extra)
7472 * This can be called at any time. No action lock required
7475 struct ipw2100_priv *priv = libipw_priv(dev);
7477 wrqu->retry.disabled = 0; /* can't be disabled */
7479 if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
7480 return -EINVAL;
7482 if (wrqu->retry.flags & IW_RETRY_LONG) {
7483 wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
7484 wrqu->retry.value = priv->long_retry_limit;
7485 } else {
7486 wrqu->retry.flags =
7487 (priv->short_retry_limit !=
7488 priv->long_retry_limit) ?
7489 IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT;
7491 wrqu->retry.value = priv->short_retry_limit;
7494 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu->retry.value);
7496 return 0;
7499 static int ipw2100_wx_set_scan(struct net_device *dev,
7500 struct iw_request_info *info,
7501 union iwreq_data *wrqu, char *extra)
7503 struct ipw2100_priv *priv = libipw_priv(dev);
7504 int err = 0;
7506 mutex_lock(&priv->action_mutex);
7507 if (!(priv->status & STATUS_INITIALIZED)) {
7508 err = -EIO;
7509 goto done;
7512 IPW_DEBUG_WX("Initiating scan...\n");
7514 priv->user_requested_scan = 1;
7515 if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
7516 IPW_DEBUG_WX("Start scan failed.\n");
7518 /* TODO: Mark a scan as pending so when hardware initialized
7519 * a scan starts */
7522 done:
7523 mutex_unlock(&priv->action_mutex);
7524 return err;
7527 static int ipw2100_wx_get_scan(struct net_device *dev,
7528 struct iw_request_info *info,
7529 union iwreq_data *wrqu, char *extra)
7532 * This can be called at any time. No action lock required
7535 struct ipw2100_priv *priv = libipw_priv(dev);
7536 return libipw_wx_get_scan(priv->ieee, info, wrqu, extra);
7540 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7542 static int ipw2100_wx_set_encode(struct net_device *dev,
7543 struct iw_request_info *info,
7544 union iwreq_data *wrqu, char *key)
7547 * No check of STATUS_INITIALIZED required
7550 struct ipw2100_priv *priv = libipw_priv(dev);
7551 return libipw_wx_set_encode(priv->ieee, info, wrqu, key);
7554 static int ipw2100_wx_get_encode(struct net_device *dev,
7555 struct iw_request_info *info,
7556 union iwreq_data *wrqu, char *key)
7559 * This can be called at any time. No action lock required
7562 struct ipw2100_priv *priv = libipw_priv(dev);
7563 return libipw_wx_get_encode(priv->ieee, info, wrqu, key);
7566 static int ipw2100_wx_set_power(struct net_device *dev,
7567 struct iw_request_info *info,
7568 union iwreq_data *wrqu, char *extra)
7570 struct ipw2100_priv *priv = libipw_priv(dev);
7571 int err = 0;
7573 mutex_lock(&priv->action_mutex);
7574 if (!(priv->status & STATUS_INITIALIZED)) {
7575 err = -EIO;
7576 goto done;
7579 if (wrqu->power.disabled) {
7580 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
7581 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
7582 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7583 goto done;
7586 switch (wrqu->power.flags & IW_POWER_MODE) {
7587 case IW_POWER_ON: /* If not specified */
7588 case IW_POWER_MODE: /* If set all mask */
7589 case IW_POWER_ALL_R: /* If explicitly state all */
7590 break;
7591 default: /* Otherwise we don't support it */
7592 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7593 wrqu->power.flags);
7594 err = -EOPNOTSUPP;
7595 goto done;
7598 /* If the user hasn't specified a power management mode yet, default
7599 * to BATTERY */
7600 priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
7601 err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
7603 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
7605 done:
7606 mutex_unlock(&priv->action_mutex);
7607 return err;
7611 static int ipw2100_wx_get_power(struct net_device *dev,
7612 struct iw_request_info *info,
7613 union iwreq_data *wrqu, char *extra)
7616 * This can be called at any time. No action lock required
7619 struct ipw2100_priv *priv = libipw_priv(dev);
7621 if (!(priv->power_mode & IPW_POWER_ENABLED))
7622 wrqu->power.disabled = 1;
7623 else {
7624 wrqu->power.disabled = 0;
7625 wrqu->power.flags = 0;
7628 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
7630 return 0;
7634 * WE-18 WPA support
7637 /* SIOCSIWGENIE */
7638 static int ipw2100_wx_set_genie(struct net_device *dev,
7639 struct iw_request_info *info,
7640 union iwreq_data *wrqu, char *extra)
7643 struct ipw2100_priv *priv = libipw_priv(dev);
7644 struct libipw_device *ieee = priv->ieee;
7645 u8 *buf;
7647 if (!ieee->wpa_enabled)
7648 return -EOPNOTSUPP;
7650 if (wrqu->data.length > MAX_WPA_IE_LEN ||
7651 (wrqu->data.length && extra == NULL))
7652 return -EINVAL;
7654 if (wrqu->data.length) {
7655 buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL);
7656 if (buf == NULL)
7657 return -ENOMEM;
7659 kfree(ieee->wpa_ie);
7660 ieee->wpa_ie = buf;
7661 ieee->wpa_ie_len = wrqu->data.length;
7662 } else {
7663 kfree(ieee->wpa_ie);
7664 ieee->wpa_ie = NULL;
7665 ieee->wpa_ie_len = 0;
7668 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
7670 return 0;
7673 /* SIOCGIWGENIE */
7674 static int ipw2100_wx_get_genie(struct net_device *dev,
7675 struct iw_request_info *info,
7676 union iwreq_data *wrqu, char *extra)
7678 struct ipw2100_priv *priv = libipw_priv(dev);
7679 struct libipw_device *ieee = priv->ieee;
7681 if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
7682 wrqu->data.length = 0;
7683 return 0;
7686 if (wrqu->data.length < ieee->wpa_ie_len)
7687 return -E2BIG;
7689 wrqu->data.length = ieee->wpa_ie_len;
7690 memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
7692 return 0;
7695 /* SIOCSIWAUTH */
7696 static int ipw2100_wx_set_auth(struct net_device *dev,
7697 struct iw_request_info *info,
7698 union iwreq_data *wrqu, char *extra)
7700 struct ipw2100_priv *priv = libipw_priv(dev);
7701 struct libipw_device *ieee = priv->ieee;
7702 struct iw_param *param = &wrqu->param;
7703 struct lib80211_crypt_data *crypt;
7704 unsigned long flags;
7705 int ret = 0;
7707 switch (param->flags & IW_AUTH_INDEX) {
7708 case IW_AUTH_WPA_VERSION:
7709 case IW_AUTH_CIPHER_PAIRWISE:
7710 case IW_AUTH_CIPHER_GROUP:
7711 case IW_AUTH_KEY_MGMT:
7713 * ipw2200 does not use these parameters
7715 break;
7717 case IW_AUTH_TKIP_COUNTERMEASURES:
7718 crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
7719 if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags)
7720 break;
7722 flags = crypt->ops->get_flags(crypt->priv);
7724 if (param->value)
7725 flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7726 else
7727 flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7729 crypt->ops->set_flags(flags, crypt->priv);
7731 break;
7733 case IW_AUTH_DROP_UNENCRYPTED:{
7734 /* HACK:
7736 * wpa_supplicant calls set_wpa_enabled when the driver
7737 * is loaded and unloaded, regardless of if WPA is being
7738 * used. No other calls are made which can be used to
7739 * determine if encryption will be used or not prior to
7740 * association being expected. If encryption is not being
7741 * used, drop_unencrypted is set to false, else true -- we
7742 * can use this to determine if the CAP_PRIVACY_ON bit should
7743 * be set.
7745 struct libipw_security sec = {
7746 .flags = SEC_ENABLED,
7747 .enabled = param->value,
7749 priv->ieee->drop_unencrypted = param->value;
7750 /* We only change SEC_LEVEL for open mode. Others
7751 * are set by ipw_wpa_set_encryption.
7753 if (!param->value) {
7754 sec.flags |= SEC_LEVEL;
7755 sec.level = SEC_LEVEL_0;
7756 } else {
7757 sec.flags |= SEC_LEVEL;
7758 sec.level = SEC_LEVEL_1;
7760 if (priv->ieee->set_security)
7761 priv->ieee->set_security(priv->ieee->dev, &sec);
7762 break;
7765 case IW_AUTH_80211_AUTH_ALG:
7766 ret = ipw2100_wpa_set_auth_algs(priv, param->value);
7767 break;
7769 case IW_AUTH_WPA_ENABLED:
7770 ret = ipw2100_wpa_enable(priv, param->value);
7771 break;
7773 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7774 ieee->ieee802_1x = param->value;
7775 break;
7777 //case IW_AUTH_ROAMING_CONTROL:
7778 case IW_AUTH_PRIVACY_INVOKED:
7779 ieee->privacy_invoked = param->value;
7780 break;
7782 default:
7783 return -EOPNOTSUPP;
7785 return ret;
7788 /* SIOCGIWAUTH */
7789 static int ipw2100_wx_get_auth(struct net_device *dev,
7790 struct iw_request_info *info,
7791 union iwreq_data *wrqu, char *extra)
7793 struct ipw2100_priv *priv = libipw_priv(dev);
7794 struct libipw_device *ieee = priv->ieee;
7795 struct lib80211_crypt_data *crypt;
7796 struct iw_param *param = &wrqu->param;
7797 int ret = 0;
7799 switch (param->flags & IW_AUTH_INDEX) {
7800 case IW_AUTH_WPA_VERSION:
7801 case IW_AUTH_CIPHER_PAIRWISE:
7802 case IW_AUTH_CIPHER_GROUP:
7803 case IW_AUTH_KEY_MGMT:
7805 * wpa_supplicant will control these internally
7807 ret = -EOPNOTSUPP;
7808 break;
7810 case IW_AUTH_TKIP_COUNTERMEASURES:
7811 crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
7812 if (!crypt || !crypt->ops->get_flags) {
7813 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7814 "crypt not set!\n");
7815 break;
7818 param->value = (crypt->ops->get_flags(crypt->priv) &
7819 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0;
7821 break;
7823 case IW_AUTH_DROP_UNENCRYPTED:
7824 param->value = ieee->drop_unencrypted;
7825 break;
7827 case IW_AUTH_80211_AUTH_ALG:
7828 param->value = priv->ieee->sec.auth_mode;
7829 break;
7831 case IW_AUTH_WPA_ENABLED:
7832 param->value = ieee->wpa_enabled;
7833 break;
7835 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7836 param->value = ieee->ieee802_1x;
7837 break;
7839 case IW_AUTH_ROAMING_CONTROL:
7840 case IW_AUTH_PRIVACY_INVOKED:
7841 param->value = ieee->privacy_invoked;
7842 break;
7844 default:
7845 return -EOPNOTSUPP;
7847 return 0;
7850 /* SIOCSIWENCODEEXT */
7851 static int ipw2100_wx_set_encodeext(struct net_device *dev,
7852 struct iw_request_info *info,
7853 union iwreq_data *wrqu, char *extra)
7855 struct ipw2100_priv *priv = libipw_priv(dev);
7856 return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra);
7859 /* SIOCGIWENCODEEXT */
7860 static int ipw2100_wx_get_encodeext(struct net_device *dev,
7861 struct iw_request_info *info,
7862 union iwreq_data *wrqu, char *extra)
7864 struct ipw2100_priv *priv = libipw_priv(dev);
7865 return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra);
7868 /* SIOCSIWMLME */
7869 static int ipw2100_wx_set_mlme(struct net_device *dev,
7870 struct iw_request_info *info,
7871 union iwreq_data *wrqu, char *extra)
7873 struct ipw2100_priv *priv = libipw_priv(dev);
7874 struct iw_mlme *mlme = (struct iw_mlme *)extra;
7875 __le16 reason;
7877 reason = cpu_to_le16(mlme->reason_code);
7879 switch (mlme->cmd) {
7880 case IW_MLME_DEAUTH:
7881 // silently ignore
7882 break;
7884 case IW_MLME_DISASSOC:
7885 ipw2100_disassociate_bssid(priv);
7886 break;
7888 default:
7889 return -EOPNOTSUPP;
7891 return 0;
7896 * IWPRIV handlers
7899 #ifdef CONFIG_IPW2100_MONITOR
7900 static int ipw2100_wx_set_promisc(struct net_device *dev,
7901 struct iw_request_info *info,
7902 union iwreq_data *wrqu, char *extra)
7904 struct ipw2100_priv *priv = libipw_priv(dev);
7905 int *parms = (int *)extra;
7906 int enable = (parms[0] > 0);
7907 int err = 0;
7909 mutex_lock(&priv->action_mutex);
7910 if (!(priv->status & STATUS_INITIALIZED)) {
7911 err = -EIO;
7912 goto done;
7915 if (enable) {
7916 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
7917 err = ipw2100_set_channel(priv, parms[1], 0);
7918 goto done;
7920 priv->channel = parms[1];
7921 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7922 } else {
7923 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
7924 err = ipw2100_switch_mode(priv, priv->last_mode);
7926 done:
7927 mutex_unlock(&priv->action_mutex);
7928 return err;
7931 static int ipw2100_wx_reset(struct net_device *dev,
7932 struct iw_request_info *info,
7933 union iwreq_data *wrqu, char *extra)
7935 struct ipw2100_priv *priv = libipw_priv(dev);
7936 if (priv->status & STATUS_INITIALIZED)
7937 schedule_reset(priv);
7938 return 0;
7941 #endif
7943 static int ipw2100_wx_set_powermode(struct net_device *dev,
7944 struct iw_request_info *info,
7945 union iwreq_data *wrqu, char *extra)
7947 struct ipw2100_priv *priv = libipw_priv(dev);
7948 int err = 0, mode = *(int *)extra;
7950 mutex_lock(&priv->action_mutex);
7951 if (!(priv->status & STATUS_INITIALIZED)) {
7952 err = -EIO;
7953 goto done;
7956 if ((mode < 0) || (mode > POWER_MODES))
7957 mode = IPW_POWER_AUTO;
7959 if (IPW_POWER_LEVEL(priv->power_mode) != mode)
7960 err = ipw2100_set_power_mode(priv, mode);
7961 done:
7962 mutex_unlock(&priv->action_mutex);
7963 return err;
7966 #define MAX_POWER_STRING 80
7967 static int ipw2100_wx_get_powermode(struct net_device *dev,
7968 struct iw_request_info *info,
7969 union iwreq_data *wrqu, char *extra)
7972 * This can be called at any time. No action lock required
7975 struct ipw2100_priv *priv = libipw_priv(dev);
7976 int level = IPW_POWER_LEVEL(priv->power_mode);
7977 s32 timeout, period;
7979 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
7980 snprintf(extra, MAX_POWER_STRING,
7981 "Power save level: %d (Off)", level);
7982 } else {
7983 switch (level) {
7984 case IPW_POWER_MODE_CAM:
7985 snprintf(extra, MAX_POWER_STRING,
7986 "Power save level: %d (None)", level);
7987 break;
7988 case IPW_POWER_AUTO:
7989 snprintf(extra, MAX_POWER_STRING,
7990 "Power save level: %d (Auto)", level);
7991 break;
7992 default:
7993 timeout = timeout_duration[level - 1] / 1000;
7994 period = period_duration[level - 1] / 1000;
7995 snprintf(extra, MAX_POWER_STRING,
7996 "Power save level: %d "
7997 "(Timeout %dms, Period %dms)",
7998 level, timeout, period);
8002 wrqu->data.length = strlen(extra) + 1;
8004 return 0;
8007 static int ipw2100_wx_set_preamble(struct net_device *dev,
8008 struct iw_request_info *info,
8009 union iwreq_data *wrqu, char *extra)
8011 struct ipw2100_priv *priv = libipw_priv(dev);
8012 int err, mode = *(int *)extra;
8014 mutex_lock(&priv->action_mutex);
8015 if (!(priv->status & STATUS_INITIALIZED)) {
8016 err = -EIO;
8017 goto done;
8020 if (mode == 1)
8021 priv->config |= CFG_LONG_PREAMBLE;
8022 else if (mode == 0)
8023 priv->config &= ~CFG_LONG_PREAMBLE;
8024 else {
8025 err = -EINVAL;
8026 goto done;
8029 err = ipw2100_system_config(priv, 0);
8031 done:
8032 mutex_unlock(&priv->action_mutex);
8033 return err;
8036 static int ipw2100_wx_get_preamble(struct net_device *dev,
8037 struct iw_request_info *info,
8038 union iwreq_data *wrqu, char *extra)
8041 * This can be called at any time. No action lock required
8044 struct ipw2100_priv *priv = libipw_priv(dev);
8046 if (priv->config & CFG_LONG_PREAMBLE)
8047 snprintf(wrqu->name, IFNAMSIZ, "long (1)");
8048 else
8049 snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
8051 return 0;
8054 #ifdef CONFIG_IPW2100_MONITOR
8055 static int ipw2100_wx_set_crc_check(struct net_device *dev,
8056 struct iw_request_info *info,
8057 union iwreq_data *wrqu, char *extra)
8059 struct ipw2100_priv *priv = libipw_priv(dev);
8060 int err, mode = *(int *)extra;
8062 mutex_lock(&priv->action_mutex);
8063 if (!(priv->status & STATUS_INITIALIZED)) {
8064 err = -EIO;
8065 goto done;
8068 if (mode == 1)
8069 priv->config |= CFG_CRC_CHECK;
8070 else if (mode == 0)
8071 priv->config &= ~CFG_CRC_CHECK;
8072 else {
8073 err = -EINVAL;
8074 goto done;
8076 err = 0;
8078 done:
8079 mutex_unlock(&priv->action_mutex);
8080 return err;
8083 static int ipw2100_wx_get_crc_check(struct net_device *dev,
8084 struct iw_request_info *info,
8085 union iwreq_data *wrqu, char *extra)
8088 * This can be called at any time. No action lock required
8091 struct ipw2100_priv *priv = libipw_priv(dev);
8093 if (priv->config & CFG_CRC_CHECK)
8094 snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
8095 else
8096 snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)");
8098 return 0;
8100 #endif /* CONFIG_IPW2100_MONITOR */
8102 static iw_handler ipw2100_wx_handlers[] = {
8103 NULL, /* SIOCSIWCOMMIT */
8104 ipw2100_wx_get_name, /* SIOCGIWNAME */
8105 NULL, /* SIOCSIWNWID */
8106 NULL, /* SIOCGIWNWID */
8107 ipw2100_wx_set_freq, /* SIOCSIWFREQ */
8108 ipw2100_wx_get_freq, /* SIOCGIWFREQ */
8109 ipw2100_wx_set_mode, /* SIOCSIWMODE */
8110 ipw2100_wx_get_mode, /* SIOCGIWMODE */
8111 NULL, /* SIOCSIWSENS */
8112 NULL, /* SIOCGIWSENS */
8113 NULL, /* SIOCSIWRANGE */
8114 ipw2100_wx_get_range, /* SIOCGIWRANGE */
8115 NULL, /* SIOCSIWPRIV */
8116 NULL, /* SIOCGIWPRIV */
8117 NULL, /* SIOCSIWSTATS */
8118 NULL, /* SIOCGIWSTATS */
8119 NULL, /* SIOCSIWSPY */
8120 NULL, /* SIOCGIWSPY */
8121 NULL, /* SIOCGIWTHRSPY */
8122 NULL, /* SIOCWIWTHRSPY */
8123 ipw2100_wx_set_wap, /* SIOCSIWAP */
8124 ipw2100_wx_get_wap, /* SIOCGIWAP */
8125 ipw2100_wx_set_mlme, /* SIOCSIWMLME */
8126 NULL, /* SIOCGIWAPLIST -- deprecated */
8127 ipw2100_wx_set_scan, /* SIOCSIWSCAN */
8128 ipw2100_wx_get_scan, /* SIOCGIWSCAN */
8129 ipw2100_wx_set_essid, /* SIOCSIWESSID */
8130 ipw2100_wx_get_essid, /* SIOCGIWESSID */
8131 ipw2100_wx_set_nick, /* SIOCSIWNICKN */
8132 ipw2100_wx_get_nick, /* SIOCGIWNICKN */
8133 NULL, /* -- hole -- */
8134 NULL, /* -- hole -- */
8135 ipw2100_wx_set_rate, /* SIOCSIWRATE */
8136 ipw2100_wx_get_rate, /* SIOCGIWRATE */
8137 ipw2100_wx_set_rts, /* SIOCSIWRTS */
8138 ipw2100_wx_get_rts, /* SIOCGIWRTS */
8139 ipw2100_wx_set_frag, /* SIOCSIWFRAG */
8140 ipw2100_wx_get_frag, /* SIOCGIWFRAG */
8141 ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
8142 ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
8143 ipw2100_wx_set_retry, /* SIOCSIWRETRY */
8144 ipw2100_wx_get_retry, /* SIOCGIWRETRY */
8145 ipw2100_wx_set_encode, /* SIOCSIWENCODE */
8146 ipw2100_wx_get_encode, /* SIOCGIWENCODE */
8147 ipw2100_wx_set_power, /* SIOCSIWPOWER */
8148 ipw2100_wx_get_power, /* SIOCGIWPOWER */
8149 NULL, /* -- hole -- */
8150 NULL, /* -- hole -- */
8151 ipw2100_wx_set_genie, /* SIOCSIWGENIE */
8152 ipw2100_wx_get_genie, /* SIOCGIWGENIE */
8153 ipw2100_wx_set_auth, /* SIOCSIWAUTH */
8154 ipw2100_wx_get_auth, /* SIOCGIWAUTH */
8155 ipw2100_wx_set_encodeext, /* SIOCSIWENCODEEXT */
8156 ipw2100_wx_get_encodeext, /* SIOCGIWENCODEEXT */
8157 NULL, /* SIOCSIWPMKSA */
8160 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8161 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8162 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8163 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8164 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8165 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8166 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8167 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8169 static const struct iw_priv_args ipw2100_private_args[] = {
8171 #ifdef CONFIG_IPW2100_MONITOR
8173 IPW2100_PRIV_SET_MONITOR,
8174 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"},
8176 IPW2100_PRIV_RESET,
8177 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"},
8178 #endif /* CONFIG_IPW2100_MONITOR */
8181 IPW2100_PRIV_SET_POWER,
8182 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"},
8184 IPW2100_PRIV_GET_POWER,
8185 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING,
8186 "get_power"},
8188 IPW2100_PRIV_SET_LONGPREAMBLE,
8189 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
8191 IPW2100_PRIV_GET_LONGPREAMBLE,
8192 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"},
8193 #ifdef CONFIG_IPW2100_MONITOR
8195 IPW2100_PRIV_SET_CRC_CHECK,
8196 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"},
8198 IPW2100_PRIV_GET_CRC_CHECK,
8199 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"},
8200 #endif /* CONFIG_IPW2100_MONITOR */
8203 static iw_handler ipw2100_private_handler[] = {
8204 #ifdef CONFIG_IPW2100_MONITOR
8205 ipw2100_wx_set_promisc,
8206 ipw2100_wx_reset,
8207 #else /* CONFIG_IPW2100_MONITOR */
8208 NULL,
8209 NULL,
8210 #endif /* CONFIG_IPW2100_MONITOR */
8211 ipw2100_wx_set_powermode,
8212 ipw2100_wx_get_powermode,
8213 ipw2100_wx_set_preamble,
8214 ipw2100_wx_get_preamble,
8215 #ifdef CONFIG_IPW2100_MONITOR
8216 ipw2100_wx_set_crc_check,
8217 ipw2100_wx_get_crc_check,
8218 #else /* CONFIG_IPW2100_MONITOR */
8219 NULL,
8220 NULL,
8221 #endif /* CONFIG_IPW2100_MONITOR */
8225 * Get wireless statistics.
8226 * Called by /proc/net/wireless
8227 * Also called by SIOCGIWSTATS
8229 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
8231 enum {
8232 POOR = 30,
8233 FAIR = 60,
8234 GOOD = 80,
8235 VERY_GOOD = 90,
8236 EXCELLENT = 95,
8237 PERFECT = 100
8239 int rssi_qual;
8240 int tx_qual;
8241 int beacon_qual;
8242 int quality;
8244 struct ipw2100_priv *priv = libipw_priv(dev);
8245 struct iw_statistics *wstats;
8246 u32 rssi, tx_retries, missed_beacons, tx_failures;
8247 u32 ord_len = sizeof(u32);
8249 if (!priv)
8250 return (struct iw_statistics *)NULL;
8252 wstats = &priv->wstats;
8254 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8255 * ipw2100_wx_wireless_stats seems to be called before fw is
8256 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8257 * and associated; if not associcated, the values are all meaningless
8258 * anyway, so set them all to NULL and INVALID */
8259 if (!(priv->status & STATUS_ASSOCIATED)) {
8260 wstats->miss.beacon = 0;
8261 wstats->discard.retries = 0;
8262 wstats->qual.qual = 0;
8263 wstats->qual.level = 0;
8264 wstats->qual.noise = 0;
8265 wstats->qual.updated = 7;
8266 wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
8267 IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
8268 return wstats;
8271 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
8272 &missed_beacons, &ord_len))
8273 goto fail_get_ordinal;
8275 /* If we don't have a connection the quality and level is 0 */
8276 if (!(priv->status & STATUS_ASSOCIATED)) {
8277 wstats->qual.qual = 0;
8278 wstats->qual.level = 0;
8279 } else {
8280 if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
8281 &rssi, &ord_len))
8282 goto fail_get_ordinal;
8283 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8284 if (rssi < 10)
8285 rssi_qual = rssi * POOR / 10;
8286 else if (rssi < 15)
8287 rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
8288 else if (rssi < 20)
8289 rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
8290 else if (rssi < 30)
8291 rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
8292 10 + GOOD;
8293 else
8294 rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
8295 10 + VERY_GOOD;
8297 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
8298 &tx_retries, &ord_len))
8299 goto fail_get_ordinal;
8301 if (tx_retries > 75)
8302 tx_qual = (90 - tx_retries) * POOR / 15;
8303 else if (tx_retries > 70)
8304 tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
8305 else if (tx_retries > 65)
8306 tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
8307 else if (tx_retries > 50)
8308 tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
8309 15 + GOOD;
8310 else
8311 tx_qual = (50 - tx_retries) *
8312 (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
8314 if (missed_beacons > 50)
8315 beacon_qual = (60 - missed_beacons) * POOR / 10;
8316 else if (missed_beacons > 40)
8317 beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
8318 10 + POOR;
8319 else if (missed_beacons > 32)
8320 beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
8321 18 + FAIR;
8322 else if (missed_beacons > 20)
8323 beacon_qual = (32 - missed_beacons) *
8324 (VERY_GOOD - GOOD) / 20 + GOOD;
8325 else
8326 beacon_qual = (20 - missed_beacons) *
8327 (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
8329 quality = min(tx_qual, rssi_qual);
8330 quality = min(beacon_qual, quality);
8332 #ifdef CONFIG_IPW2100_DEBUG
8333 if (beacon_qual == quality)
8334 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8335 else if (tx_qual == quality)
8336 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8337 else if (quality != 100)
8338 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8339 else
8340 IPW_DEBUG_WX("Quality not clamped.\n");
8341 #endif
8343 wstats->qual.qual = quality;
8344 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8347 wstats->qual.noise = 0;
8348 wstats->qual.updated = 7;
8349 wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
8351 /* FIXME: this is percent and not a # */
8352 wstats->miss.beacon = missed_beacons;
8354 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
8355 &tx_failures, &ord_len))
8356 goto fail_get_ordinal;
8357 wstats->discard.retries = tx_failures;
8359 return wstats;
8361 fail_get_ordinal:
8362 IPW_DEBUG_WX("failed querying ordinals.\n");
8364 return (struct iw_statistics *)NULL;
8367 static struct iw_handler_def ipw2100_wx_handler_def = {
8368 .standard = ipw2100_wx_handlers,
8369 .num_standard = ARRAY_SIZE(ipw2100_wx_handlers),
8370 .num_private = ARRAY_SIZE(ipw2100_private_handler),
8371 .num_private_args = ARRAY_SIZE(ipw2100_private_args),
8372 .private = (iw_handler *) ipw2100_private_handler,
8373 .private_args = (struct iw_priv_args *)ipw2100_private_args,
8374 .get_wireless_stats = ipw2100_wx_wireless_stats,
8377 static void ipw2100_wx_event_work(struct work_struct *work)
8379 struct ipw2100_priv *priv =
8380 container_of(work, struct ipw2100_priv, wx_event_work.work);
8381 union iwreq_data wrqu;
8382 unsigned int len = ETH_ALEN;
8384 if (priv->status & STATUS_STOPPING)
8385 return;
8387 mutex_lock(&priv->action_mutex);
8389 IPW_DEBUG_WX("enter\n");
8391 mutex_unlock(&priv->action_mutex);
8393 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
8395 /* Fetch BSSID from the hardware */
8396 if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
8397 priv->status & STATUS_RF_KILL_MASK ||
8398 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
8399 &priv->bssid, &len)) {
8400 memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
8401 } else {
8402 /* We now have the BSSID, so can finish setting to the full
8403 * associated state */
8404 memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
8405 memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN);
8406 priv->status &= ~STATUS_ASSOCIATING;
8407 priv->status |= STATUS_ASSOCIATED;
8408 netif_carrier_on(priv->net_dev);
8409 netif_wake_queue(priv->net_dev);
8412 if (!(priv->status & STATUS_ASSOCIATED)) {
8413 IPW_DEBUG_WX("Configuring ESSID\n");
8414 mutex_lock(&priv->action_mutex);
8415 /* This is a disassociation event, so kick the firmware to
8416 * look for another AP */
8417 if (priv->config & CFG_STATIC_ESSID)
8418 ipw2100_set_essid(priv, priv->essid, priv->essid_len,
8420 else
8421 ipw2100_set_essid(priv, NULL, 0, 0);
8422 mutex_unlock(&priv->action_mutex);
8425 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
8428 #define IPW2100_FW_MAJOR_VERSION 1
8429 #define IPW2100_FW_MINOR_VERSION 3
8431 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8432 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8434 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8435 IPW2100_FW_MAJOR_VERSION)
8437 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8438 "." __stringify(IPW2100_FW_MINOR_VERSION)
8440 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8444 BINARY FIRMWARE HEADER FORMAT
8446 offset length desc
8447 0 2 version
8448 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8449 4 4 fw_len
8450 8 4 uc_len
8451 C fw_len firmware data
8452 12 + fw_len uc_len microcode data
8456 struct ipw2100_fw_header {
8457 short version;
8458 short mode;
8459 unsigned int fw_size;
8460 unsigned int uc_size;
8461 } __packed;
8463 static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
8465 struct ipw2100_fw_header *h =
8466 (struct ipw2100_fw_header *)fw->fw_entry->data;
8468 if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
8469 printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
8470 "(detected version id of %u). "
8471 "See Documentation/networking/README.ipw2100\n",
8472 h->version);
8473 return 1;
8476 fw->version = h->version;
8477 fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
8478 fw->fw.size = h->fw_size;
8479 fw->uc.data = fw->fw.data + h->fw_size;
8480 fw->uc.size = h->uc_size;
8482 return 0;
8485 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
8486 struct ipw2100_fw *fw)
8488 char *fw_name;
8489 int rc;
8491 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8492 priv->net_dev->name);
8494 switch (priv->ieee->iw_mode) {
8495 case IW_MODE_ADHOC:
8496 fw_name = IPW2100_FW_NAME("-i");
8497 break;
8498 #ifdef CONFIG_IPW2100_MONITOR
8499 case IW_MODE_MONITOR:
8500 fw_name = IPW2100_FW_NAME("-p");
8501 break;
8502 #endif
8503 case IW_MODE_INFRA:
8504 default:
8505 fw_name = IPW2100_FW_NAME("");
8506 break;
8509 rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
8511 if (rc < 0) {
8512 printk(KERN_ERR DRV_NAME ": "
8513 "%s: Firmware '%s' not available or load failed.\n",
8514 priv->net_dev->name, fw_name);
8515 return rc;
8517 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
8518 fw->fw_entry->size);
8520 ipw2100_mod_firmware_load(fw);
8522 return 0;
8525 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8526 #ifdef CONFIG_IPW2100_MONITOR
8527 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8528 #endif
8529 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8531 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
8532 struct ipw2100_fw *fw)
8534 fw->version = 0;
8535 if (fw->fw_entry)
8536 release_firmware(fw->fw_entry);
8537 fw->fw_entry = NULL;
8540 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
8541 size_t max)
8543 char ver[MAX_FW_VERSION_LEN];
8544 u32 len = MAX_FW_VERSION_LEN;
8545 u32 tmp;
8546 int i;
8547 /* firmware version is an ascii string (max len of 14) */
8548 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len))
8549 return -EIO;
8550 tmp = max;
8551 if (len >= max)
8552 len = max - 1;
8553 for (i = 0; i < len; i++)
8554 buf[i] = ver[i];
8555 buf[i] = '\0';
8556 return tmp;
8559 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
8560 size_t max)
8562 u32 ver;
8563 u32 len = sizeof(ver);
8564 /* microcode version is a 32 bit integer */
8565 if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len))
8566 return -EIO;
8567 return snprintf(buf, max, "%08X", ver);
8571 * On exit, the firmware will have been freed from the fw list
8573 static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
8575 /* firmware is constructed of N contiguous entries, each entry is
8576 * structured as:
8578 * offset sie desc
8579 * 0 4 address to write to
8580 * 4 2 length of data run
8581 * 6 length data
8583 unsigned int addr;
8584 unsigned short len;
8586 const unsigned char *firmware_data = fw->fw.data;
8587 unsigned int firmware_data_left = fw->fw.size;
8589 while (firmware_data_left > 0) {
8590 addr = *(u32 *) (firmware_data);
8591 firmware_data += 4;
8592 firmware_data_left -= 4;
8594 len = *(u16 *) (firmware_data);
8595 firmware_data += 2;
8596 firmware_data_left -= 2;
8598 if (len > 32) {
8599 printk(KERN_ERR DRV_NAME ": "
8600 "Invalid firmware run-length of %d bytes\n",
8601 len);
8602 return -EINVAL;
8605 write_nic_memory(priv->net_dev, addr, len, firmware_data);
8606 firmware_data += len;
8607 firmware_data_left -= len;
8610 return 0;
8613 struct symbol_alive_response {
8614 u8 cmd_id;
8615 u8 seq_num;
8616 u8 ucode_rev;
8617 u8 eeprom_valid;
8618 u16 valid_flags;
8619 u8 IEEE_addr[6];
8620 u16 flags;
8621 u16 pcb_rev;
8622 u16 clock_settle_time; // 1us LSB
8623 u16 powerup_settle_time; // 1us LSB
8624 u16 hop_settle_time; // 1us LSB
8625 u8 date[3]; // month, day, year
8626 u8 time[2]; // hours, minutes
8627 u8 ucode_valid;
8630 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
8631 struct ipw2100_fw *fw)
8633 struct net_device *dev = priv->net_dev;
8634 const unsigned char *microcode_data = fw->uc.data;
8635 unsigned int microcode_data_left = fw->uc.size;
8636 void __iomem *reg = (void __iomem *)dev->base_addr;
8638 struct symbol_alive_response response;
8639 int i, j;
8640 u8 data;
8642 /* Symbol control */
8643 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8644 readl(reg);
8645 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8646 readl(reg);
8648 /* HW config */
8649 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8650 readl(reg);
8651 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8652 readl(reg);
8654 /* EN_CS_ACCESS bit to reset control store pointer */
8655 write_nic_byte(dev, 0x210000, 0x40);
8656 readl(reg);
8657 write_nic_byte(dev, 0x210000, 0x0);
8658 readl(reg);
8659 write_nic_byte(dev, 0x210000, 0x40);
8660 readl(reg);
8662 /* copy microcode from buffer into Symbol */
8664 while (microcode_data_left > 0) {
8665 write_nic_byte(dev, 0x210010, *microcode_data++);
8666 write_nic_byte(dev, 0x210010, *microcode_data++);
8667 microcode_data_left -= 2;
8670 /* EN_CS_ACCESS bit to reset the control store pointer */
8671 write_nic_byte(dev, 0x210000, 0x0);
8672 readl(reg);
8674 /* Enable System (Reg 0)
8675 * first enable causes garbage in RX FIFO */
8676 write_nic_byte(dev, 0x210000, 0x0);
8677 readl(reg);
8678 write_nic_byte(dev, 0x210000, 0x80);
8679 readl(reg);
8681 /* Reset External Baseband Reg */
8682 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8683 readl(reg);
8684 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8685 readl(reg);
8687 /* HW Config (Reg 5) */
8688 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8689 readl(reg);
8690 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8691 readl(reg);
8693 /* Enable System (Reg 0)
8694 * second enable should be OK */
8695 write_nic_byte(dev, 0x210000, 0x00); // clear enable system
8696 readl(reg);
8697 write_nic_byte(dev, 0x210000, 0x80); // set enable system
8699 /* check Symbol is enabled - upped this from 5 as it wasn't always
8700 * catching the update */
8701 for (i = 0; i < 10; i++) {
8702 udelay(10);
8704 /* check Dino is enabled bit */
8705 read_nic_byte(dev, 0x210000, &data);
8706 if (data & 0x1)
8707 break;
8710 if (i == 10) {
8711 printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
8712 dev->name);
8713 return -EIO;
8716 /* Get Symbol alive response */
8717 for (i = 0; i < 30; i++) {
8718 /* Read alive response structure */
8719 for (j = 0;
8720 j < (sizeof(struct symbol_alive_response) >> 1); j++)
8721 read_nic_word(dev, 0x210004, ((u16 *) & response) + j);
8723 if ((response.cmd_id == 1) && (response.ucode_valid == 0x1))
8724 break;
8725 udelay(10);
8728 if (i == 30) {
8729 printk(KERN_ERR DRV_NAME
8730 ": %s: No response from Symbol - hw not alive\n",
8731 dev->name);
8732 printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response));
8733 return -EIO;
8736 return 0;