Linux v2.6.13
[linux-2.6/next.git] / drivers / serial / mpsc.h
blob678dbcf06c8faaf5fe0452042375d31d37aff857
1 /*
2 * drivers/serial/mpsc.h
4 * Author: Mark A. Greer <mgreer@mvista.com>
6 * 2004 (c) MontaVista, Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
12 #ifndef __MPSC_H__
13 #define __MPSC_H__
15 #include <linux/config.h>
16 #include <linux/module.h>
17 #include <linux/moduleparam.h>
18 #include <linux/tty.h>
19 #include <linux/tty_flip.h>
20 #include <linux/ioport.h>
21 #include <linux/init.h>
22 #include <linux/console.h>
23 #include <linux/sysrq.h>
24 #include <linux/serial.h>
25 #include <linux/serial_core.h>
26 #include <linux/delay.h>
27 #include <linux/device.h>
28 #include <linux/dma-mapping.h>
29 #include <linux/mv643xx.h>
31 #include <asm/io.h>
32 #include <asm/irq.h>
34 #if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
35 #define SUPPORT_SYSRQ
36 #endif
38 #define MPSC_NUM_CTLRS 2
41 * Descriptors and buffers must be cache line aligned.
42 * Buffers lengths must be multiple of cache line size.
43 * Number of Tx & Rx descriptors must be powers of 2.
45 #define MPSC_RXR_ENTRIES 32
46 #define MPSC_RXRE_SIZE dma_get_cache_alignment()
47 #define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
48 #define MPSC_RXBE_SIZE dma_get_cache_alignment()
49 #define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)
51 #define MPSC_TXR_ENTRIES 32
52 #define MPSC_TXRE_SIZE dma_get_cache_alignment()
53 #define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
54 #define MPSC_TXBE_SIZE dma_get_cache_alignment()
55 #define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)
57 #define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \
58 MPSC_TXR_SIZE + MPSC_TXB_SIZE + \
59 dma_get_cache_alignment() /* for alignment */)
61 /* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
62 struct mpsc_rx_desc {
63 u16 bufsize;
64 u16 bytecnt;
65 u32 cmdstat;
66 u32 link;
67 u32 buf_ptr;
68 } __attribute((packed));
70 struct mpsc_tx_desc {
71 u16 bytecnt;
72 u16 shadow;
73 u32 cmdstat;
74 u32 link;
75 u32 buf_ptr;
76 } __attribute((packed));
79 * Some regs that have the erratum that you can't read them are are shared
80 * between the two MPSC controllers. This struct contains those shared regs.
82 struct mpsc_shared_regs {
83 phys_addr_t mpsc_routing_base_p;
84 phys_addr_t sdma_intr_base_p;
86 void __iomem *mpsc_routing_base;
87 void __iomem *sdma_intr_base;
89 u32 MPSC_MRR_m;
90 u32 MPSC_RCRR_m;
91 u32 MPSC_TCRR_m;
92 u32 SDMA_INTR_CAUSE_m;
93 u32 SDMA_INTR_MASK_m;
96 /* The main driver data structure */
97 struct mpsc_port_info {
98 struct uart_port port; /* Overlay uart_port structure */
100 /* Internal driver state for this ctlr */
101 u8 ready;
102 u8 rcv_data;
103 tcflag_t c_iflag; /* save termios->c_iflag */
104 tcflag_t c_cflag; /* save termios->c_cflag */
106 /* Info passed in from platform */
107 u8 mirror_regs; /* Need to mirror regs? */
108 u8 cache_mgmt; /* Need manual cache mgmt? */
109 u8 brg_can_tune; /* BRG has baud tuning? */
110 u32 brg_clk_src;
111 u16 mpsc_max_idle;
112 int default_baud;
113 int default_bits;
114 int default_parity;
115 int default_flow;
117 /* Physical addresses of various blocks of registers (from platform) */
118 phys_addr_t mpsc_base_p;
119 phys_addr_t sdma_base_p;
120 phys_addr_t brg_base_p;
122 /* Virtual addresses of various blocks of registers (from platform) */
123 void __iomem *mpsc_base;
124 void __iomem *sdma_base;
125 void __iomem *brg_base;
127 /* Descriptor ring and buffer allocations */
128 void *dma_region;
129 dma_addr_t dma_region_p;
131 dma_addr_t rxr; /* Rx descriptor ring */
132 dma_addr_t rxr_p; /* Phys addr of rxr */
133 u8 *rxb; /* Rx Ring I/O buf */
134 u8 *rxb_p; /* Phys addr of rxb */
135 u32 rxr_posn; /* First desc w/ Rx data */
137 dma_addr_t txr; /* Tx descriptor ring */
138 dma_addr_t txr_p; /* Phys addr of txr */
139 u8 *txb; /* Tx Ring I/O buf */
140 u8 *txb_p; /* Phys addr of txb */
141 int txr_head; /* Where new data goes */
142 int txr_tail; /* Where sent data comes off */
144 /* Mirrored values of regs we can't read (if 'mirror_regs' set) */
145 u32 MPSC_MPCR_m;
146 u32 MPSC_CHR_1_m;
147 u32 MPSC_CHR_2_m;
148 u32 MPSC_CHR_10_m;
149 u32 BRG_BCR_m;
150 struct mpsc_shared_regs *shared_regs;
153 /* Hooks to platform-specific code */
154 int mpsc_platform_register_driver(void);
155 void mpsc_platform_unregister_driver(void);
157 /* Hooks back in to mpsc common to be called by platform-specific code */
158 struct mpsc_port_info *mpsc_device_probe(int index);
159 struct mpsc_port_info *mpsc_device_remove(int index);
162 *****************************************************************************
164 * Multi-Protocol Serial Controller Interface Registers
166 *****************************************************************************
169 /* Main Configuratino Register Offsets */
170 #define MPSC_MMCRL 0x0000
171 #define MPSC_MMCRH 0x0004
172 #define MPSC_MPCR 0x0008
173 #define MPSC_CHR_1 0x000c
174 #define MPSC_CHR_2 0x0010
175 #define MPSC_CHR_3 0x0014
176 #define MPSC_CHR_4 0x0018
177 #define MPSC_CHR_5 0x001c
178 #define MPSC_CHR_6 0x0020
179 #define MPSC_CHR_7 0x0024
180 #define MPSC_CHR_8 0x0028
181 #define MPSC_CHR_9 0x002c
182 #define MPSC_CHR_10 0x0030
183 #define MPSC_CHR_11 0x0034
185 #define MPSC_MPCR_FRZ (1 << 9)
186 #define MPSC_MPCR_CL_5 0
187 #define MPSC_MPCR_CL_6 1
188 #define MPSC_MPCR_CL_7 2
189 #define MPSC_MPCR_CL_8 3
190 #define MPSC_MPCR_SBL_1 0
191 #define MPSC_MPCR_SBL_2 1
193 #define MPSC_CHR_2_TEV (1<<1)
194 #define MPSC_CHR_2_TA (1<<7)
195 #define MPSC_CHR_2_TTCS (1<<9)
196 #define MPSC_CHR_2_REV (1<<17)
197 #define MPSC_CHR_2_RA (1<<23)
198 #define MPSC_CHR_2_CRD (1<<25)
199 #define MPSC_CHR_2_EH (1<<31)
200 #define MPSC_CHR_2_PAR_ODD 0
201 #define MPSC_CHR_2_PAR_SPACE 1
202 #define MPSC_CHR_2_PAR_EVEN 2
203 #define MPSC_CHR_2_PAR_MARK 3
205 /* MPSC Signal Routing */
206 #define MPSC_MRR 0x0000
207 #define MPSC_RCRR 0x0004
208 #define MPSC_TCRR 0x0008
211 *****************************************************************************
213 * Serial DMA Controller Interface Registers
215 *****************************************************************************
218 #define SDMA_SDC 0x0000
219 #define SDMA_SDCM 0x0008
220 #define SDMA_RX_DESC 0x0800
221 #define SDMA_RX_BUF_PTR 0x0808
222 #define SDMA_SCRDP 0x0810
223 #define SDMA_TX_DESC 0x0c00
224 #define SDMA_SCTDP 0x0c10
225 #define SDMA_SFTDP 0x0c14
227 #define SDMA_DESC_CMDSTAT_PE (1<<0)
228 #define SDMA_DESC_CMDSTAT_CDL (1<<1)
229 #define SDMA_DESC_CMDSTAT_FR (1<<3)
230 #define SDMA_DESC_CMDSTAT_OR (1<<6)
231 #define SDMA_DESC_CMDSTAT_BR (1<<9)
232 #define SDMA_DESC_CMDSTAT_MI (1<<10)
233 #define SDMA_DESC_CMDSTAT_A (1<<11)
234 #define SDMA_DESC_CMDSTAT_AM (1<<12)
235 #define SDMA_DESC_CMDSTAT_CT (1<<13)
236 #define SDMA_DESC_CMDSTAT_C (1<<14)
237 #define SDMA_DESC_CMDSTAT_ES (1<<15)
238 #define SDMA_DESC_CMDSTAT_L (1<<16)
239 #define SDMA_DESC_CMDSTAT_F (1<<17)
240 #define SDMA_DESC_CMDSTAT_P (1<<18)
241 #define SDMA_DESC_CMDSTAT_EI (1<<23)
242 #define SDMA_DESC_CMDSTAT_O (1<<31)
244 #define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \
245 SDMA_DESC_CMDSTAT_EI)
247 #define SDMA_SDC_RFT (1<<0)
248 #define SDMA_SDC_SFM (1<<1)
249 #define SDMA_SDC_BLMR (1<<6)
250 #define SDMA_SDC_BLMT (1<<7)
251 #define SDMA_SDC_POVR (1<<8)
252 #define SDMA_SDC_RIFB (1<<9)
254 #define SDMA_SDCM_ERD (1<<7)
255 #define SDMA_SDCM_AR (1<<15)
256 #define SDMA_SDCM_STD (1<<16)
257 #define SDMA_SDCM_TXD (1<<23)
258 #define SDMA_SDCM_AT (1<<31)
260 #define SDMA_0_CAUSE_RXBUF (1<<0)
261 #define SDMA_0_CAUSE_RXERR (1<<1)
262 #define SDMA_0_CAUSE_TXBUF (1<<2)
263 #define SDMA_0_CAUSE_TXEND (1<<3)
264 #define SDMA_1_CAUSE_RXBUF (1<<8)
265 #define SDMA_1_CAUSE_RXERR (1<<9)
266 #define SDMA_1_CAUSE_TXBUF (1<<10)
267 #define SDMA_1_CAUSE_TXEND (1<<11)
269 #define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
270 SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
271 #define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
272 SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
274 /* SDMA Interrupt registers */
275 #define SDMA_INTR_CAUSE 0x0000
276 #define SDMA_INTR_MASK 0x0080
279 *****************************************************************************
281 * Baud Rate Generator Interface Registers
283 *****************************************************************************
286 #define BRG_BCR 0x0000
287 #define BRG_BTR 0x0004
289 #endif /* __MPSC_H__ */