1 /******************************************************************
2 * Copyright (c) 2000-2007 PMC-Sierra INC.
4 * This program is free software; you can redistribute it
5 * and/or modify it under the terms of the GNU General
6 * Public License as published by the Free Software
7 * Foundation; either version 2 of the License, or (at your
8 * option) any later version.
10 * This program is distributed in the hope that it will be
11 * useful, but WITHOUT ANY WARRANTY; without even the implied
12 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
13 * PURPOSE. See the GNU General Public License for more
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
21 * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
22 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
28 #ifdef CONFIG_MSP_HAS_DUAL_USB
29 #define NUM_USB_DEVS 2
31 #define NUM_USB_DEVS 1
34 /* Register spaces for USB host 0 */
35 #define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0)
36 #define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17)
37 #define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000)
38 #define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f)
39 #define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100)
40 #define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF)
42 /* Register spaces for USB host 1 */
43 #define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0)
44 #define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17)
45 #define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000)
46 #define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f)
47 #define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100)
48 #define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff)
50 /* USB Identification registers */
51 struct msp_usbid_regs
{
52 u32 id
; /* 0x0: Identification register */
53 u32 hwgen
; /* 0x4: General HW params */
54 u32 hwhost
; /* 0x8: Host HW params */
55 u32 hwdev
; /* 0xc: Device HW params */
56 u32 hwtxbuf
; /* 0x10: Tx buffer HW params */
57 u32 hwrxbuf
; /* 0x14: Rx buffer HW params */
59 u32 timer0_load
; /* 0x80: General-purpose timer 0 load*/
60 u32 timer0_ctrl
; /* 0x84: General-purpose timer 0 control */
61 u32 timer1_load
; /* 0x88: General-purpose timer 1 load*/
62 u32 timer1_ctrl
; /* 0x8c: General-purpose timer 1 control */
65 /* MSBus to AMBA registers */
67 u32 isr
; /* 0x0: Interrupt status */
68 u32 imr
; /* 0x4: Interrupt mask */
69 u32 thcr0
; /* 0x8: Transaction header capture 0 */
70 u32 thcr1
; /* 0xc: Transaction header capture 1 */
71 u32 int_stat
; /* 0x10: Interrupt status summary */
72 u32 phy_cfg
; /* 0x14: USB phy config */
76 struct msp_usbhs_regs
{
77 u32 hciver
; /* 0x0: Version and offset to operational regs */
78 u32 hcsparams
; /* 0x4: Host control structural parameters */
79 u32 hccparams
; /* 0x8: Host control capability parameters */
81 u32 dciver
; /* 0x20: Device interface version */
82 u32 dccparams
; /* 0x24: Device control capability parameters */
84 u32 cmd
; /* 0x40: USB command */
85 u32 sts
; /* 0x44: USB status */
86 u32 int_ena
; /* 0x48: USB interrupt enable */
87 u32 frindex
; /* 0x4c: Frame index */
91 u32 flb_addr
; /* 0x54: Frame list base address */
92 u32 next_async_addr
; /* 0x58: next asynchronous addr */
93 u32 ttctrl
; /* 0x5c: embedded transaction translator
94 async buffer status */
95 u32 burst_size
; /* 0x60: Controller burst size */
96 u32 tx_fifo_ctrl
; /* 0x64: Tx latency FIFO tuning */
98 u32 endpt_nak
; /* 0x78: Endpoint NAK */
99 u32 endpt_nak_ena
; /* 0x7c: Endpoint NAK enable */
100 u32 cfg_flag
; /* 0x80: Config flag */
101 u32 port_sc1
; /* 0x84: Port status & control 1 */
103 u32 otgsc
; /* 0xa4: OTG status & control */
104 u32 mode
; /* 0xa8: USB controller mode */
108 u32 dev_addr
; /* 0x54: Device address */
109 u32 endpt_list_addr
; /* 0x58: Endpoint list address */
111 u32 endpt_nak
; /* 0x74 */
112 u32 endpt_nak_ctrl
; /* 0x78 */
113 u32 cfg_flag
; /* 0x80 */
114 u32 port_sc1
; /* 0x84: Port status & control 1 */
116 u32 otgsc
; /* 0xa4: OTG status & control */
117 u32 mode
; /* 0xa8: USB controller mode */
118 u32 endpt_setup_stat
; /* 0xac */
119 u32 endpt_prime
; /* 0xb0 */
120 u32 endpt_flush
; /* 0xb4 */
121 u32 endpt_stat
; /* 0xb8 */
122 u32 endpt_complete
; /* 0xbc */
123 u32 endpt_ctrl0
; /* 0xc0 */
124 u32 endpt_ctrl1
; /* 0xc4 */
125 u32 endpt_ctrl2
; /* 0xc8 */
126 u32 endpt_ctrl3
; /* 0xcc */
131 * Container for the more-generic platform_device.
132 * This exists mainly as a way to map the non-standard register
133 * spaces and make them accessible to the USB ISR.
135 struct mspusb_device
{
136 struct msp_mab_regs __iomem
*mab_regs
;
137 struct msp_usbid_regs __iomem
*usbid_regs
;
138 struct msp_usbhs_regs __iomem
*usbhs_regs
;
139 struct platform_device dev
;
142 #define to_mspusb_device(x) container_of((x), struct mspusb_device, dev)
143 #define TO_HOST_ID(x) ((x) & 0x3)
144 #endif /*MSP_USB_H_*/