2 * Copyright (C) 2003 PMC-Sierra Inc.
3 * Author: Manish Lachwani (lachwani@pmc-sierra.com)
5 * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
12 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
16 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
17 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
18 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
19 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
20 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
21 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 675 Mass Ave, Cambridge, MA 02139, USA.
27 * Second level Interrupt handlers for the PMC-Sierra Titan/Yosemite board
29 #include <linux/errno.h>
30 #include <linux/init.h>
31 #include <linux/kernel_stat.h>
32 #include <linux/module.h>
33 #include <linux/signal.h>
34 #include <linux/sched.h>
35 #include <linux/types.h>
36 #include <linux/interrupt.h>
37 #include <linux/ioport.h>
38 #include <linux/irq.h>
39 #include <linux/timex.h>
40 #include <linux/random.h>
41 #include <linux/bitops.h>
42 #include <asm/bootinfo.h>
45 #include <asm/irq_cpu.h>
46 #include <asm/mipsregs.h>
47 #include <asm/system.h>
48 #include <asm/titan_dep.h>
50 /* Hypertransport specific */
51 #define IRQ_ACK_BITS 0x00000000 /* Ack bits */
53 #define HYPERTRANSPORT_INTA 0x78 /* INTA# */
54 #define HYPERTRANSPORT_INTB 0x79 /* INTB# */
55 #define HYPERTRANSPORT_INTC 0x7a /* INTC# */
56 #define HYPERTRANSPORT_INTD 0x7b /* INTD# */
58 extern void titan_mailbox_irq(void);
60 #ifdef CONFIG_HYPERTRANSPORT
62 * Handle hypertransport & SMP interrupts. The interrupt lines are scarce.
63 * For interprocessor interrupts, the best thing to do is to use the INTMSG
64 * register. We use the same external interrupt line, i.e. INTB3 and monitor
67 static void ll_ht_smp_irq_handler(int irq
)
69 u32 status
= OCD_READ(RM9000x2_OCD_INTP0STATUS4
);
71 /* Ack all the bits that correspond to the interrupt sources */
73 OCD_WRITE(RM9000x2_OCD_INTP0STATUS4
, IRQ_ACK_BITS
);
75 status
= OCD_READ(RM9000x2_OCD_INTP1STATUS4
);
77 OCD_WRITE(RM9000x2_OCD_INTP1STATUS4
, IRQ_ACK_BITS
);
79 #ifdef CONFIG_HT_LEVEL_TRIGGER
81 * Level Trigger Mode only. Send the HT EOI message back to the source.
85 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTA
);
88 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTB
);
91 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTC
);
94 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTD
);
98 OCD_WRITE(RM9000x2_OCD_HTEOI
, 0x20);
99 OCD_WRITE(IRQ_CLEAR_REG
, IRQ_ACK_BITS
);
102 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTA
);
103 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTB
);
104 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTC
);
105 OCD_WRITE(RM9000x2_OCD_HTEOI
, HYPERTRANSPORT_INTD
);
108 #endif /* CONFIG_HT_LEVEL_TRIGGER */
114 asmlinkage
void plat_irq_dispatch(void)
116 unsigned int cause
= read_c0_cause();
117 unsigned int status
= read_c0_status();
118 unsigned int pending
= cause
& status
;
120 if (pending
& STATUSF_IP7
) {
122 } else if (pending
& STATUSF_IP2
) {
123 #ifdef CONFIG_HYPERTRANSPORT
124 ll_ht_smp_irq_handler(2);
128 } else if (pending
& STATUSF_IP3
) {
130 } else if (pending
& STATUSF_IP4
) {
132 } else if (pending
& STATUSF_IP5
) {
138 } else if (pending
& STATUSF_IP6
) {
144 * Initialize the next level interrupt handler
146 void __init
arch_init_irq(void)
148 clear_c0_status(ST0_IM
);