The discovered bit in PGCCSR register indicates if the device has been
[linux-2.6/next.git] / arch / blackfin / mach-bf537 / boards / tcm_bf537.c
blobaee8fc3a12370b5181a02836367f3ac99c85e4a7
1 /*
2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2008-2009 Bluetechnix
4 * 2005 National ICT Australia (NICTA)
5 * Aidan Williams <aidan@nicta.com.au>
7 * Licensed under the GPL-2 or later.
8 */
10 #include <linux/device.h>
11 #include <linux/etherdevice.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/spi/spi.h>
17 #include <linux/spi/flash.h>
18 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
19 #include <linux/usb/isp1362.h>
20 #endif
21 #include <linux/ata_platform.h>
22 #include <linux/irq.h>
23 #include <asm/dma.h>
24 #include <asm/bfin5xx_spi.h>
25 #include <asm/portmux.h>
26 #include <asm/dpmc.h>
27 #include <linux/spi/mmc_spi.h>
30 * Name the Board for the /proc/cpuinfo
32 const char bfin_board_name[] = "Bluetechnix TCM BF537";
34 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
35 /* all SPI peripherals info goes here */
37 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
38 static struct mtd_partition bfin_spi_flash_partitions[] = {
40 .name = "bootloader(spi)",
41 .size = 0x00020000,
42 .offset = 0,
43 .mask_flags = MTD_CAP_ROM
44 }, {
45 .name = "linux kernel(spi)",
46 .size = 0xe0000,
47 .offset = 0x20000
48 }, {
49 .name = "file system(spi)",
50 .size = 0x700000,
51 .offset = 0x00100000,
55 static struct flash_platform_data bfin_spi_flash_data = {
56 .name = "m25p80",
57 .parts = bfin_spi_flash_partitions,
58 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
59 .type = "m25p64",
62 /* SPI flash chip (m25p64) */
63 static struct bfin5xx_spi_chip spi_flash_chip_info = {
64 .enable_dma = 0, /* use dma transfer with this chip*/
66 #endif
68 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
69 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
70 .enable_dma = 0,
72 #endif
74 static struct spi_board_info bfin_spi_board_info[] __initdata = {
75 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
77 /* the modalias must be the same as spi device driver name */
78 .modalias = "m25p80", /* Name of spi_driver for this device */
79 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
80 .bus_num = 0, /* Framework bus number */
81 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
82 .platform_data = &bfin_spi_flash_data,
83 .controller_data = &spi_flash_chip_info,
84 .mode = SPI_MODE_3,
86 #endif
88 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
90 .modalias = "ad183x",
91 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
92 .bus_num = 0,
93 .chip_select = 4,
95 #endif
97 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
99 .modalias = "mmc_spi",
100 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
101 .bus_num = 0,
102 .chip_select = 1,
103 .controller_data = &mmc_spi_chip_info,
104 .mode = SPI_MODE_3,
106 #endif
109 /* SPI (0) */
110 static struct resource bfin_spi0_resource[] = {
111 [0] = {
112 .start = SPI0_REGBASE,
113 .end = SPI0_REGBASE + 0xFF,
114 .flags = IORESOURCE_MEM,
116 [1] = {
117 .start = CH_SPI,
118 .end = CH_SPI,
119 .flags = IORESOURCE_DMA,
121 [2] = {
122 .start = IRQ_SPI,
123 .end = IRQ_SPI,
124 .flags = IORESOURCE_IRQ,
128 /* SPI controller data */
129 static struct bfin5xx_spi_master bfin_spi0_info = {
130 .num_chipselect = 8,
131 .enable_dma = 1, /* master has the ability to do dma transfer */
132 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
135 static struct platform_device bfin_spi0_device = {
136 .name = "bfin-spi",
137 .id = 0, /* Bus number */
138 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
139 .resource = bfin_spi0_resource,
140 .dev = {
141 .platform_data = &bfin_spi0_info, /* Passed to driver */
144 #endif /* spi master and devices */
146 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
147 static struct platform_device rtc_device = {
148 .name = "rtc-bfin",
149 .id = -1,
151 #endif
153 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
154 static struct platform_device hitachi_fb_device = {
155 .name = "hitachi-tx09",
157 #endif
159 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
160 #include <linux/smc91x.h>
162 static struct smc91x_platdata smc91x_info = {
163 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
164 .leda = RPC_LED_100_10,
165 .ledb = RPC_LED_TX_RX,
168 static struct resource smc91x_resources[] = {
170 .start = 0x20200300,
171 .end = 0x20200300 + 16,
172 .flags = IORESOURCE_MEM,
173 }, {
174 .start = IRQ_PF14,
175 .end = IRQ_PF14,
176 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
180 static struct platform_device smc91x_device = {
181 .name = "smc91x",
182 .id = 0,
183 .num_resources = ARRAY_SIZE(smc91x_resources),
184 .resource = smc91x_resources,
185 .dev = {
186 .platform_data = &smc91x_info,
189 #endif
191 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
192 static struct resource isp1362_hcd_resources[] = {
194 .start = 0x20308000,
195 .end = 0x20308000,
196 .flags = IORESOURCE_MEM,
197 }, {
198 .start = 0x20308004,
199 .end = 0x20308004,
200 .flags = IORESOURCE_MEM,
201 }, {
202 .start = IRQ_PG15,
203 .end = IRQ_PG15,
204 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
208 static struct isp1362_platform_data isp1362_priv = {
209 .sel15Kres = 1,
210 .clknotstop = 0,
211 .oc_enable = 0,
212 .int_act_high = 0,
213 .int_edge_triggered = 0,
214 .remote_wakeup_connected = 0,
215 .no_power_switching = 1,
216 .power_switching_mode = 0,
219 static struct platform_device isp1362_hcd_device = {
220 .name = "isp1362-hcd",
221 .id = 0,
222 .dev = {
223 .platform_data = &isp1362_priv,
225 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
226 .resource = isp1362_hcd_resources,
228 #endif
230 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
231 static struct resource net2272_bfin_resources[] = {
233 .start = 0x20300000,
234 .end = 0x20300000 + 0x100,
235 .flags = IORESOURCE_MEM,
236 }, {
237 .start = IRQ_PG13,
238 .end = IRQ_PG13,
239 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
243 static struct platform_device net2272_bfin_device = {
244 .name = "net2272",
245 .id = -1,
246 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
247 .resource = net2272_bfin_resources,
249 #endif
251 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
252 static struct mtd_partition cm_partitions[] = {
254 .name = "bootloader(nor)",
255 .size = 0x40000,
256 .offset = 0,
257 }, {
258 .name = "linux kernel(nor)",
259 .size = 0x100000,
260 .offset = MTDPART_OFS_APPEND,
261 }, {
262 .name = "file system(nor)",
263 .size = MTDPART_SIZ_FULL,
264 .offset = MTDPART_OFS_APPEND,
268 static struct physmap_flash_data cm_flash_data = {
269 .width = 2,
270 .parts = cm_partitions,
271 .nr_parts = ARRAY_SIZE(cm_partitions),
274 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
276 static struct resource cm_flash_resource[] = {
278 .name = "cfi_probe",
279 .start = 0x20000000,
280 .end = 0x201fffff,
281 .flags = IORESOURCE_MEM,
282 }, {
283 .start = (unsigned long)cm_flash_gpios,
284 .end = ARRAY_SIZE(cm_flash_gpios),
285 .flags = IORESOURCE_IRQ,
289 static struct platform_device cm_flash_device = {
290 .name = "gpio-addr-flash",
291 .id = 0,
292 .dev = {
293 .platform_data = &cm_flash_data,
295 .num_resources = ARRAY_SIZE(cm_flash_resource),
296 .resource = cm_flash_resource,
298 #endif
300 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
301 #ifdef CONFIG_SERIAL_BFIN_UART0
302 static struct resource bfin_uart0_resources[] = {
304 .start = UART0_THR,
305 .end = UART0_GCTL+2,
306 .flags = IORESOURCE_MEM,
309 .start = IRQ_UART0_TX,
310 .end = IRQ_UART0_TX,
311 .flags = IORESOURCE_IRQ,
314 .start = IRQ_UART0_RX,
315 .end = IRQ_UART0_RX,
316 .flags = IORESOURCE_IRQ,
319 .start = IRQ_UART0_ERROR,
320 .end = IRQ_UART0_ERROR,
321 .flags = IORESOURCE_IRQ,
324 .start = CH_UART0_TX,
325 .end = CH_UART0_TX,
326 .flags = IORESOURCE_DMA,
329 .start = CH_UART0_RX,
330 .end = CH_UART0_RX,
331 .flags = IORESOURCE_DMA,
335 static unsigned short bfin_uart0_peripherals[] = {
336 P_UART0_TX, P_UART0_RX, 0
339 static struct platform_device bfin_uart0_device = {
340 .name = "bfin-uart",
341 .id = 0,
342 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
343 .resource = bfin_uart0_resources,
344 .dev = {
345 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
348 #endif
349 #ifdef CONFIG_SERIAL_BFIN_UART1
350 static struct resource bfin_uart1_resources[] = {
352 .start = UART1_THR,
353 .end = UART1_GCTL+2,
354 .flags = IORESOURCE_MEM,
357 .start = IRQ_UART1_TX,
358 .end = IRQ_UART1_TX,
359 .flags = IORESOURCE_IRQ,
362 .start = IRQ_UART1_RX,
363 .end = IRQ_UART1_RX,
364 .flags = IORESOURCE_IRQ,
367 .start = IRQ_UART1_ERROR,
368 .end = IRQ_UART1_ERROR,
369 .flags = IORESOURCE_IRQ,
372 .start = CH_UART1_TX,
373 .end = CH_UART1_TX,
374 .flags = IORESOURCE_DMA,
377 .start = CH_UART1_RX,
378 .end = CH_UART1_RX,
379 .flags = IORESOURCE_DMA,
383 static unsigned short bfin_uart1_peripherals[] = {
384 P_UART1_TX, P_UART1_RX, 0
387 static struct platform_device bfin_uart1_device = {
388 .name = "bfin-uart",
389 .id = 1,
390 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
391 .resource = bfin_uart1_resources,
392 .dev = {
393 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
396 #endif
397 #endif
399 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
400 #ifdef CONFIG_BFIN_SIR0
401 static struct resource bfin_sir0_resources[] = {
403 .start = 0xFFC00400,
404 .end = 0xFFC004FF,
405 .flags = IORESOURCE_MEM,
408 .start = IRQ_UART0_RX,
409 .end = IRQ_UART0_RX+1,
410 .flags = IORESOURCE_IRQ,
413 .start = CH_UART0_RX,
414 .end = CH_UART0_RX+1,
415 .flags = IORESOURCE_DMA,
419 static struct platform_device bfin_sir0_device = {
420 .name = "bfin_sir",
421 .id = 0,
422 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
423 .resource = bfin_sir0_resources,
425 #endif
426 #ifdef CONFIG_BFIN_SIR1
427 static struct resource bfin_sir1_resources[] = {
429 .start = 0xFFC02000,
430 .end = 0xFFC020FF,
431 .flags = IORESOURCE_MEM,
434 .start = IRQ_UART1_RX,
435 .end = IRQ_UART1_RX+1,
436 .flags = IORESOURCE_IRQ,
439 .start = CH_UART1_RX,
440 .end = CH_UART1_RX+1,
441 .flags = IORESOURCE_DMA,
445 static struct platform_device bfin_sir1_device = {
446 .name = "bfin_sir",
447 .id = 1,
448 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
449 .resource = bfin_sir1_resources,
451 #endif
452 #endif
454 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
455 static struct resource bfin_twi0_resource[] = {
456 [0] = {
457 .start = TWI0_REGBASE,
458 .end = TWI0_REGBASE,
459 .flags = IORESOURCE_MEM,
461 [1] = {
462 .start = IRQ_TWI,
463 .end = IRQ_TWI,
464 .flags = IORESOURCE_IRQ,
468 static struct platform_device i2c_bfin_twi_device = {
469 .name = "i2c-bfin-twi",
470 .id = 0,
471 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
472 .resource = bfin_twi0_resource,
474 #endif
476 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
477 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
478 static struct resource bfin_sport0_uart_resources[] = {
480 .start = SPORT0_TCR1,
481 .end = SPORT0_MRCS3+4,
482 .flags = IORESOURCE_MEM,
485 .start = IRQ_SPORT0_RX,
486 .end = IRQ_SPORT0_RX+1,
487 .flags = IORESOURCE_IRQ,
490 .start = IRQ_SPORT0_ERROR,
491 .end = IRQ_SPORT0_ERROR,
492 .flags = IORESOURCE_IRQ,
496 static unsigned short bfin_sport0_peripherals[] = {
497 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
498 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
501 static struct platform_device bfin_sport0_uart_device = {
502 .name = "bfin-sport-uart",
503 .id = 0,
504 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
505 .resource = bfin_sport0_uart_resources,
506 .dev = {
507 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
510 #endif
511 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
512 static struct resource bfin_sport1_uart_resources[] = {
514 .start = SPORT1_TCR1,
515 .end = SPORT1_MRCS3+4,
516 .flags = IORESOURCE_MEM,
519 .start = IRQ_SPORT1_RX,
520 .end = IRQ_SPORT1_RX+1,
521 .flags = IORESOURCE_IRQ,
524 .start = IRQ_SPORT1_ERROR,
525 .end = IRQ_SPORT1_ERROR,
526 .flags = IORESOURCE_IRQ,
530 static unsigned short bfin_sport1_peripherals[] = {
531 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
532 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
535 static struct platform_device bfin_sport1_uart_device = {
536 .name = "bfin-sport-uart",
537 .id = 1,
538 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
539 .resource = bfin_sport1_uart_resources,
540 .dev = {
541 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
544 #endif
545 #endif
547 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
548 #include <linux/bfin_mac.h>
549 static const unsigned short bfin_mac_peripherals[] = P_MII0;
551 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
553 .addr = 1,
554 .irq = IRQ_MAC_PHYINT,
558 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
559 .phydev_number = 1,
560 .phydev_data = bfin_phydev_data,
561 .phy_mode = PHY_INTERFACE_MODE_MII,
562 .mac_peripherals = bfin_mac_peripherals,
565 static struct platform_device bfin_mii_bus = {
566 .name = "bfin_mii_bus",
567 .dev = {
568 .platform_data = &bfin_mii_bus_data,
572 static struct platform_device bfin_mac_device = {
573 .name = "bfin_mac",
574 .dev = {
575 .platform_data = &bfin_mii_bus,
578 #endif
580 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
581 #define PATA_INT IRQ_PF14
583 static struct pata_platform_info bfin_pata_platform_data = {
584 .ioport_shift = 2,
585 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
588 static struct resource bfin_pata_resources[] = {
590 .start = 0x2030C000,
591 .end = 0x2030C01F,
592 .flags = IORESOURCE_MEM,
595 .start = 0x2030D018,
596 .end = 0x2030D01B,
597 .flags = IORESOURCE_MEM,
600 .start = PATA_INT,
601 .end = PATA_INT,
602 .flags = IORESOURCE_IRQ,
606 static struct platform_device bfin_pata_device = {
607 .name = "pata_platform",
608 .id = -1,
609 .num_resources = ARRAY_SIZE(bfin_pata_resources),
610 .resource = bfin_pata_resources,
611 .dev = {
612 .platform_data = &bfin_pata_platform_data,
615 #endif
617 static const unsigned int cclk_vlev_datasheet[] =
619 VRPAIR(VLEV_085, 250000000),
620 VRPAIR(VLEV_090, 376000000),
621 VRPAIR(VLEV_095, 426000000),
622 VRPAIR(VLEV_100, 426000000),
623 VRPAIR(VLEV_105, 476000000),
624 VRPAIR(VLEV_110, 476000000),
625 VRPAIR(VLEV_115, 476000000),
626 VRPAIR(VLEV_120, 500000000),
627 VRPAIR(VLEV_125, 533000000),
628 VRPAIR(VLEV_130, 600000000),
631 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
632 .tuple_tab = cclk_vlev_datasheet,
633 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
634 .vr_settling_time = 25 /* us */,
637 static struct platform_device bfin_dpmc = {
638 .name = "bfin dpmc",
639 .dev = {
640 .platform_data = &bfin_dmpc_vreg_data,
644 static struct platform_device *cm_bf537_devices[] __initdata = {
646 &bfin_dpmc,
648 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
649 &hitachi_fb_device,
650 #endif
652 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
653 &rtc_device,
654 #endif
656 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
657 #ifdef CONFIG_SERIAL_BFIN_UART0
658 &bfin_uart0_device,
659 #endif
660 #ifdef CONFIG_SERIAL_BFIN_UART1
661 &bfin_uart1_device,
662 #endif
663 #endif
665 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
666 #ifdef CONFIG_BFIN_SIR0
667 &bfin_sir0_device,
668 #endif
669 #ifdef CONFIG_BFIN_SIR1
670 &bfin_sir1_device,
671 #endif
672 #endif
674 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
675 &i2c_bfin_twi_device,
676 #endif
678 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
679 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
680 &bfin_sport0_uart_device,
681 #endif
682 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
683 &bfin_sport1_uart_device,
684 #endif
685 #endif
687 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
688 &isp1362_hcd_device,
689 #endif
691 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
692 &smc91x_device,
693 #endif
695 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
696 &bfin_mii_bus,
697 &bfin_mac_device,
698 #endif
700 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
701 &net2272_bfin_device,
702 #endif
704 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
705 &bfin_spi0_device,
706 #endif
708 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
709 &bfin_pata_device,
710 #endif
712 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
713 &cm_flash_device,
714 #endif
717 static int __init net2272_init(void)
719 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
720 int ret;
722 ret = gpio_request(GPIO_PG14, "net2272");
723 if (ret)
724 return ret;
726 /* Reset USB Chip, PG14 */
727 gpio_direction_output(GPIO_PG14, 0);
728 mdelay(2);
729 gpio_set_value(GPIO_PG14, 1);
730 #endif
732 return 0;
735 static int __init tcm_bf537_init(void)
737 printk(KERN_INFO "%s(): registering device resources\n", __func__);
738 platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
739 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
740 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
741 #endif
743 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
744 irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
745 #endif
747 if (net2272_init())
748 pr_warning("unable to configure net2272; it probably won't work\n");
750 return 0;
753 arch_initcall(tcm_bf537_init);
755 static struct platform_device *cm_bf537_early_devices[] __initdata = {
756 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
757 #ifdef CONFIG_SERIAL_BFIN_UART0
758 &bfin_uart0_device,
759 #endif
760 #ifdef CONFIG_SERIAL_BFIN_UART1
761 &bfin_uart1_device,
762 #endif
763 #endif
765 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
766 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
767 &bfin_sport0_uart_device,
768 #endif
769 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
770 &bfin_sport1_uart_device,
771 #endif
772 #endif
775 void __init native_machine_early_platform_add_devices(void)
777 printk(KERN_INFO "register early platform devices\n");
778 early_platform_add_devices(cm_bf537_early_devices,
779 ARRAY_SIZE(cm_bf537_early_devices));
782 void bfin_get_ether_addr(char *addr)
784 random_ether_addr(addr);
785 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
787 EXPORT_SYMBOL(bfin_get_ether_addr);