The discovered bit in PGCCSR register indicates if the device has been
[linux-2.6/next.git] / include / sound / wm8962.h
blob1750bed7c2f6ed66d92152c089e810e0332b1251
1 /*
2 * wm8962.h -- WM8962 Soc Audio driver platform data
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
9 #ifndef _WM8962_PDATA_H
10 #define _WM8962_PDATA_H
12 #define WM8962_MAX_GPIO 6
14 /* Use to set GPIO default values to zero */
15 #define WM8962_GPIO_SET 0x10000
17 #define WM8962_GPIO_FN_CLKOUT 0
18 #define WM8962_GPIO_FN_LOGIC 1
19 #define WM8962_GPIO_FN_SDOUT 2
20 #define WM8962_GPIO_FN_IRQ 3
21 #define WM8962_GPIO_FN_THERMAL 4
22 #define WM8962_GPIO_FN_PLL2_LOCK 6
23 #define WM8962_GPIO_FN_PLL3_LOCK 7
24 #define WM8962_GPIO_FN_FLL_LOCK 9
25 #define WM8962_GPIO_FN_DRC_ACT 10
26 #define WM8962_GPIO_FN_WSEQ_DONE 11
27 #define WM8962_GPIO_FN_ALC_NG_ACT 12
28 #define WM8962_GPIO_FN_ALC_PEAK_LIMIT 13
29 #define WM8962_GPIO_FN_ALC_SATURATION 14
30 #define WM8962_GPIO_FN_ALC_LEVEL_THR 15
31 #define WM8962_GPIO_FN_ALC_LEVEL_LOCK 16
32 #define WM8962_GPIO_FN_FIFO_ERR 17
33 #define WM8962_GPIO_FN_OPCLK 18
34 #define WM8962_GPIO_FN_DMICCLK 19
35 #define WM8962_GPIO_FN_DMICDAT 20
36 #define WM8962_GPIO_FN_MICD 21
37 #define WM8962_GPIO_FN_MICSCD 22
39 struct wm8962_pdata {
40 int gpio_base;
41 u32 gpio_init[WM8962_MAX_GPIO];
43 /* Setup for microphone detection, raw value to be written to
44 * R48(0x30) - only microphone related bits will be updated.
45 * Detection may be enabled here for use with signals brought
46 * out on the GPIOs. */
47 u32 mic_cfg;
49 bool irq_active_low;
51 bool spk_mono; /* Speaker outputs tied together as mono */
54 #endif