?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/next.git] / drivers / scsi / sata_vsc.c
blob2c28f0ad73c204420aa4b419a60341a8b801d7fa
1 /*
2 * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
3 *
4 * Maintained by: Jeremy Higdon @ SGI
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2004 SGI
9 *
10 * Bits from Jeff Garzik, Copyright RedHat, Inc.
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file "COPYING" in the main directory of this archive
14 * for more details.
15 */
16
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/pci.h>
20 #include <linux/init.h>
21 #include <linux/blkdev.h>
22 #include <linux/delay.h>
23 #include <linux/interrupt.h>
24 #include "scsi.h"
25 #include <scsi/scsi_host.h>
26 #include <linux/libata.h>
27
28 #define DRV_NAME "sata_vsc"
29 #define DRV_VERSION "1.0"
30
31 /* Interrupt register offsets (from chip base address) */
32 #define VSC_SATA_INT_STAT_OFFSET 0x00
33 #define VSC_SATA_INT_MASK_OFFSET 0x04
34
35 /* Taskfile registers offsets */
36 #define VSC_SATA_TF_CMD_OFFSET 0x00
37 #define VSC_SATA_TF_DATA_OFFSET 0x00
38 #define VSC_SATA_TF_ERROR_OFFSET 0x04
39 #define VSC_SATA_TF_FEATURE_OFFSET 0x06
40 #define VSC_SATA_TF_NSECT_OFFSET 0x08
41 #define VSC_SATA_TF_LBAL_OFFSET 0x0c
42 #define VSC_SATA_TF_LBAM_OFFSET 0x10
43 #define VSC_SATA_TF_LBAH_OFFSET 0x14
44 #define VSC_SATA_TF_DEVICE_OFFSET 0x18
45 #define VSC_SATA_TF_STATUS_OFFSET 0x1c
46 #define VSC_SATA_TF_COMMAND_OFFSET 0x1d
47 #define VSC_SATA_TF_ALTSTATUS_OFFSET 0x28
48 #define VSC_SATA_TF_CTL_OFFSET 0x29
49
50 /* DMA base */
51 #define VSC_SATA_UP_DESCRIPTOR_OFFSET 0x64
52 #define VSC_SATA_UP_DATA_BUFFER_OFFSET 0x6C
53 #define VSC_SATA_DMA_CMD_OFFSET 0x70
54
55 /* SCRs base */
56 #define VSC_SATA_SCR_STATUS_OFFSET 0x100
57 #define VSC_SATA_SCR_ERROR_OFFSET 0x104
58 #define VSC_SATA_SCR_CONTROL_OFFSET 0x108
59
60 /* Port stride */
61 #define VSC_SATA_PORT_OFFSET 0x200
62
63
64 static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
65 {
66 if (sc_reg > SCR_CONTROL)
67 return 0xffffffffU;
68 return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
69 }
70
71
72 static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
73 u32 val)
74 {
75 if (sc_reg > SCR_CONTROL)
76 return;
77 writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
78 }
79
80
81 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
82 {
83 unsigned long mask_addr;
84 u8 mask;
85
86 mask_addr = (unsigned long) ap->host_set->mmio_base +
87 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
88 mask = readb(mask_addr);
89 if (ctl & ATA_NIEN)
90 mask |= 0x80;
91 else
92 mask &= 0x7F;
93 writeb(mask, mask_addr);
94 }
95
96
97 static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
98 {
99 struct ata_ioports *ioaddr = &ap->ioaddr;
100 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
101
102 /*
103 * The only thing the ctl register is used for is SRST.
104 * That is not enabled or disabled via tf_load.
105 * However, if ATA_NIEN is changed, then we need to change the interrupt register.
106 */
107 if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
108 ap->last_ctl = tf->ctl;
109 vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
110 }
111 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
112 writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
113 writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
114 writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
115 writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
116 writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
117 } else if (is_addr) {
118 writew(tf->feature, ioaddr->feature_addr);
119 writew(tf->nsect, ioaddr->nsect_addr);
120 writew(tf->lbal, ioaddr->lbal_addr);
121 writew(tf->lbam, ioaddr->lbam_addr);
122 writew(tf->lbah, ioaddr->lbah_addr);
123 }
124
125 if (tf->flags & ATA_TFLAG_DEVICE)
126 writeb(tf->device, ioaddr->device_addr);
127
128 ata_wait_idle(ap);
129 }
130
131
132 static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
133 {
134 struct ata_ioports *ioaddr = &ap->ioaddr;
135 u16 nsect, lbal, lbam, lbah;
136
137 nsect = tf->nsect = readw(ioaddr->nsect_addr);
138 lbal = tf->lbal = readw(ioaddr->lbal_addr);
139 lbam = tf->lbam = readw(ioaddr->lbam_addr);
140 lbah = tf->lbah = readw(ioaddr->lbah_addr);
141 tf->device = readw(ioaddr->device_addr);
142
143 if (tf->flags & ATA_TFLAG_LBA48) {
144 tf->hob_feature = readb(ioaddr->error_addr);
145 tf->hob_nsect = nsect >> 8;
146 tf->hob_lbal = lbal >> 8;
147 tf->hob_lbam = lbam >> 8;
148 tf->hob_lbah = lbah >> 8;
149 }
150 }
151
152
153 /*
154 * vsc_sata_interrupt
155 *
156 * Read the interrupt register and process for the devices that have them pending.
157 */
158 static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
159 struct pt_regs *regs)
160 {
161 struct ata_host_set *host_set = dev_instance;
162 unsigned int i;
163 unsigned int handled = 0;
164 u32 int_status;
165
166 spin_lock(&host_set->lock);
167
168 int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET);
169
170 for (i = 0; i < host_set->n_ports; i++) {
171 if (int_status & ((u32) 0xFF << (8 * i))) {
172 struct ata_port *ap;
173
174 ap = host_set->ports[i];
175 if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
176 struct ata_queued_cmd *qc;
177
178 qc = ata_qc_from_tag(ap, ap->active_tag);
179 if (qc && (!(qc->tf.ctl & ATA_NIEN)))
180 handled += ata_host_intr(ap, qc);
181 }
182 }
183 }
184
185 spin_unlock(&host_set->lock);
186
187 return IRQ_RETVAL(handled);
188 }
189
190
191 static Scsi_Host_Template vsc_sata_sht = {
192 .module = THIS_MODULE,
193 .name = DRV_NAME,
194 .ioctl = ata_scsi_ioctl,
195 .queuecommand = ata_scsi_queuecmd,
196 .eh_strategy_handler = ata_scsi_error,
197 .can_queue = ATA_DEF_QUEUE,
198 .this_id = ATA_SHT_THIS_ID,
199 .sg_tablesize = LIBATA_MAX_PRD,
200 .max_sectors = ATA_MAX_SECTORS,
201 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
202 .emulated = ATA_SHT_EMULATED,
203 .use_clustering = ATA_SHT_USE_CLUSTERING,
204 .proc_name = DRV_NAME,
205 .dma_boundary = ATA_DMA_BOUNDARY,
206 .slave_configure = ata_scsi_slave_config,
207 .bios_param = ata_std_bios_param,
208 .ordered_flush = 1,
209 };
210
211
212 static struct ata_port_operations vsc_sata_ops = {
213 .port_disable = ata_port_disable,
214 .tf_load = vsc_sata_tf_load,
215 .tf_read = vsc_sata_tf_read,
216 .exec_command = ata_exec_command,
217 .check_status = ata_check_status,
218 .dev_select = ata_std_dev_select,
219 .phy_reset = sata_phy_reset,
220 .bmdma_setup = ata_bmdma_setup,
221 .bmdma_start = ata_bmdma_start,
222 .bmdma_stop = ata_bmdma_stop,
223 .bmdma_status = ata_bmdma_status,
224 .qc_prep = ata_qc_prep,
225 .qc_issue = ata_qc_issue_prot,
226 .eng_timeout = ata_eng_timeout,
227 .irq_handler = vsc_sata_interrupt,
228 .irq_clear = ata_bmdma_irq_clear,
229 .scr_read = vsc_sata_scr_read,
230 .scr_write = vsc_sata_scr_write,
231 .port_start = ata_port_start,
232 .port_stop = ata_port_stop,
233 };
234
235 static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
236 {
237 port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
238 port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
239 port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
240 port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
241 port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
242 port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
243 port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
244 port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
245 port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
246 port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
247 port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
248 port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
249 port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
250 port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
251 port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
252 writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
253 writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
254 }
255
256
257 static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
258 {
259 static int printed_version;
260 struct ata_probe_ent *probe_ent = NULL;
261 unsigned long base;
262 int pci_dev_busy = 0;
263 void *mmio_base;
264 int rc;
265
266 if (!printed_version++)
267 printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
268
269 rc = pci_enable_device(pdev);
270 if (rc)
271 return rc;
272
273 /*
274 * Check if we have needed resource mapped.
275 */
276 if (pci_resource_len(pdev, 0) == 0) {
277 rc = -ENODEV;
278 goto err_out;
279 }
280
281 rc = pci_request_regions(pdev, DRV_NAME);
282 if (rc) {
283 pci_dev_busy = 1;
284 goto err_out;
285 }
286
287 /*
288 * Use 32 bit DMA mask, because 64 bit address support is poor.
289 */
290 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
291 if (rc)
292 goto err_out_regions;
293 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
294 if (rc)
295 goto err_out_regions;
296
297 probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
298 if (probe_ent == NULL) {
299 rc = -ENOMEM;
300 goto err_out_regions;
301 }
302 memset(probe_ent, 0, sizeof(*probe_ent));
303 probe_ent->dev = pci_dev_to_dev(pdev);
304 INIT_LIST_HEAD(&probe_ent->node);
305
306 mmio_base = ioremap(pci_resource_start(pdev, 0),
307 pci_resource_len(pdev, 0));
308 if (mmio_base == NULL) {
309 rc = -ENOMEM;
310 goto err_out_free_ent;
311 }
312 base = (unsigned long) mmio_base;
313
314 /*
315 * Due to a bug in the chip, the default cache line size can't be used
316 */
317 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
318
319 probe_ent->sht = &vsc_sata_sht;
320 probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
321 ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET;
322 probe_ent->port_ops = &vsc_sata_ops;
323 probe_ent->n_ports = 4;
324 probe_ent->irq = pdev->irq;
325 probe_ent->irq_flags = SA_SHIRQ;
326 probe_ent->mmio_base = mmio_base;
327
328 /* We don't care much about the PIO/UDMA masks, but the core won't like us
329 * if we don't fill these
330 */
331 probe_ent->pio_mask = 0x1f;
332 probe_ent->mwdma_mask = 0x07;
333 probe_ent->udma_mask = 0x7f;
334
335 /* We have 4 ports per PCI function */
336 vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET);
337 vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET);
338 vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET);
339 vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET);
340
341 pci_set_master(pdev);
342
343 /*
344 * Config offset 0x98 is "Extended Control and Status Register 0"
345 * Default value is (1 << 28). All bits except bit 28 are reserved in
346 * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
347 * If bit 28 is clear, each port has its own LED.
348 */
349 pci_write_config_dword(pdev, 0x98, 0);
350
351 /* FIXME: check ata_device_add return value */
352 ata_device_add(probe_ent);
353 kfree(probe_ent);
354
355 return 0;
356
357 err_out_free_ent:
358 kfree(probe_ent);
359 err_out_regions:
360 pci_release_regions(pdev);
361 err_out:
362 if (!pci_dev_busy)
363 pci_disable_device(pdev);
364 return rc;
365 }
366
367
368 /*
369 * 0x1725/0x7174 is the Vitesse VSC-7174
370 * 0x8086/0x3200 is the Intel 31244, which is supposed to be identical
371 * compatibility is untested as of yet
372 */
373 static struct pci_device_id vsc_sata_pci_tbl[] = {
374 { 0x1725, 0x7174, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
375 { 0x8086, 0x3200, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
376 { }
377 };
378
379
380 static struct pci_driver vsc_sata_pci_driver = {
381 .name = DRV_NAME,
382 .id_table = vsc_sata_pci_tbl,
383 .probe = vsc_sata_init_one,
384 .remove = ata_pci_remove_one,
385 };
386
387
388 static int __init vsc_sata_init(void)
389 {
390 return pci_module_init(&vsc_sata_pci_driver);
391 }
392
393
394 static void __exit vsc_sata_exit(void)
395 {
396 pci_unregister_driver(&vsc_sata_pci_driver);
397 }
398
399
400 MODULE_AUTHOR("Jeremy Higdon");
401 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
402 MODULE_LICENSE("GPL");
403 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
404 MODULE_VERSION(DRV_VERSION);
405
406 module_init(vsc_sata_init);
407 module_exit(vsc_sata_exit);
linux-next