?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/next.git] / drivers / usb / serial / ipw.c
blob11105d74f461dec2961193ffab0f89091b4781be
1 /*
2 * IPWireless 3G UMTS TDD Modem driver (USB connected)
3 *
4 * Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
5 * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * All information about the device was acquired using SnoopyPro
13 * on MSFT's O/S, and examing the MSFT drivers' debug output
14 * (insanely left _on_ in the enduser version)
15 *
16 * It was written out of frustration with the IPWireless USB modem
17 * supplied by Axity3G/Sentech South Africa not supporting
18 * Linux whatsoever.
19 *
20 * Nobody provided any proprietary information that was not already
21 * available for this device.
22 *
23 * The modem adheres to the "3GPP TS 27.007 AT command set for 3G
24 * User Equipment (UE)" standard, available from
25 * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
26 *
27 * The code was only tested the IPWireless handheld modem distributed
28 * in South Africa by Sentech.
29 *
30 * It may work for Woosh Inc in .nz too, as it appears they use the
31 * same kit.
32 *
33 * There is still some work to be done in terms of handling
34 * DCD, DTR, RTS, CTS which are currently faked.
35 * It's good enough for PPP at this point. It's based off all kinds of
36 * code found in usb/serial and usb/class
37 *
38 */
39
40 #include <linux/kernel.h>
41 #include <linux/errno.h>
42 #include <linux/init.h>
43 #include <linux/slab.h>
44 #include <linux/tty.h>
45 #include <linux/tty_flip.h>
46 #include <linux/module.h>
47 #include <linux/spinlock.h>
48 #include <linux/usb.h>
49 #include <linux/usb.h>
50 #include <asm/uaccess.h>
51 #include "usb-serial.h"
52
53 /*
54 * Version Information
55 */
56 #define DRIVER_VERSION "v0.3"
57 #define DRIVER_AUTHOR "Roelf Diedericks"
58 #define DRIVER_DESC "IPWireless tty driver"
59
60 #define IPW_TTY_MAJOR 240 /* real device node major id, experimental range */
61 #define IPW_TTY_MINORS 256 /* we support 256 devices, dunno why, it'd be insane :) */
62
63 #define USB_IPW_MAGIC 0x6d02 /* magic number for ipw struct */
64
65
66 /* Message sizes */
67 #define EVENT_BUFFER_SIZE 0xFF
68 #define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
69 #define NUM_BULK_URBS 24
70 #define NUM_CONTROL_URBS 16
71
72 /* vendor/product pairs that are known work with this driver*/
73 #define IPW_VID 0x0bc3
74 #define IPW_PID 0x0001
75
76
77 /* Vendor commands: */
78
79 /* baud rates */
80 enum {
81 ipw_sio_b256000 = 0x000e,
82 ipw_sio_b128000 = 0x001d,
83 ipw_sio_b115200 = 0x0020,
84 ipw_sio_b57600 = 0x0040,
85 ipw_sio_b56000 = 0x0042,
86 ipw_sio_b38400 = 0x0060,
87 ipw_sio_b19200 = 0x00c0,
88 ipw_sio_b14400 = 0x0100,
89 ipw_sio_b9600 = 0x0180,
90 ipw_sio_b4800 = 0x0300,
91 ipw_sio_b2400 = 0x0600,
92 ipw_sio_b1200 = 0x0c00,
93 ipw_sio_b600 = 0x1800
94 };
95
96 /* data bits */
97 #define ipw_dtb_7 0x700
98 #define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1
99 // I mean, is there a point to any other setting these days? :)
100
101 /* usb control request types : */
102 #define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off)
103 #define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx
104 #define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x
105 #define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx
106 #define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0
107 #define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open)
108 #define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge
109 #define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes
110 #define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes,
111 // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
112
113 /* values used for request IPW_SIO_SET_PIN */
114 #define IPW_PIN_SETDTR 0x101
115 #define IPW_PIN_SETRTS 0x202
116 #define IPW_PIN_CLRDTR 0x100
117 #define IPW_PIN_CLRRTS 0x200 // unconfirmed
118
119 /* values used for request IPW_SIO_RXCTL */
120 #define IPW_RXBULK_ON 1
121 #define IPW_RXBULK_OFF 0
122
123 /* various 16 byte hardcoded transferbuffers used by flow control */
124 #define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
125
126 /* Interpretation of modem status lines */
127 /* These need sorting out by individually connecting pins and checking
128 * results. FIXME!
129 * When data is being sent we see 0x30 in the lower byte; this must
130 * contain DSR and CTS ...
131 */
132 #define IPW_DSR ((1<<4) | (1<<5))
133 #define IPW_CTS ((1<<5) | (1<<4))
134
135 #define IPW_WANTS_TO_SEND 0x30
136 //#define IPW_DTR /* Data Terminal Ready */
137 //#define IPW_CTS /* Clear To Send */
138 //#define IPW_CD /* Carrier Detect */
139 //#define IPW_DSR /* Data Set Ready */
140 //#define IPW_RxD /* Receive pin */
141
142 //#define IPW_LE
143 //#define IPW_RTS
144 //#define IPW_ST
145 //#define IPW_SR
146 //#define IPW_RI /* Ring Indicator */
147
148 static struct usb_device_id usb_ipw_ids[] = {
149 { USB_DEVICE(IPW_VID, IPW_PID) },
150 { },
151 };
152
153 MODULE_DEVICE_TABLE(usb, usb_ipw_ids);
154
155 static struct usb_driver usb_ipw_driver = {
156 .owner = THIS_MODULE,
157 .name = "ipwtty",
158 .probe = usb_serial_probe,
159 .disconnect = usb_serial_disconnect,
160 .id_table = usb_ipw_ids,
161 };
162
163 static int debug;
164
165 static void ipw_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
166 {
167 struct usb_serial_port *port = urb->context;
168 unsigned char *data = urb->transfer_buffer;
169 struct tty_struct *tty;
170 int i;
171 int result;
172
173 dbg("%s - port %d", __FUNCTION__, port->number);
174
175 if (urb->status) {
176 dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
177 return;
178 }
179
180 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
181
182 tty = port->tty;
183 if (tty && urb->actual_length) {
184 for (i = 0; i < urb->actual_length ; ++i) {
185 /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
186 if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
187 tty_flip_buffer_push(tty);
188 }
189 /* this doesn't actually push the data through unless tty->low_latency is set */
190 tty_insert_flip_char(tty, data[i], 0);
191 }
192 tty_flip_buffer_push(tty);
193 }
194
195 /* Continue trying to always read */
196 usb_fill_bulk_urb (port->read_urb, port->serial->dev,
197 usb_rcvbulkpipe(port->serial->dev,
198 port->bulk_in_endpointAddress),
199 port->read_urb->transfer_buffer,
200 port->read_urb->transfer_buffer_length,
201 ipw_read_bulk_callback, port);
202 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
203 if (result)
204 dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
205 return;
206 }
207
208 static int ipw_open(struct usb_serial_port *port, struct file *filp)
209 {
210 struct usb_device *dev = port->serial->dev;
211 u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
212 u8 *buf_flow_init;
213 int result;
214
215 dbg("%s", __FUNCTION__);
216
217 buf_flow_init = kmalloc(16, GFP_KERNEL);
218 if (!buf_flow_init)
219 return -ENOMEM;
220 memcpy(buf_flow_init, buf_flow_static, 16);
221
222 if (port->tty)
223 port->tty->low_latency = 1;
224
225 /* --1: Tell the modem to initialize (we think) From sniffs this is always the
226 * first thing that gets sent to the modem during opening of the device */
227 dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__);
228 result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
229 IPW_SIO_INIT,
230 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
231 0,
232 0, /* index */
233 NULL,
234 0,
235 100000);
236 if (result < 0)
237 dev_err(&port->dev, "Init of modem failed (error = %d)", result);
238
239 /* reset the bulk pipes */
240 usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
241 usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
242
243 /*--2: Start reading from the device */
244 dbg("%s: setting up bulk read callback",__FUNCTION__);
245 usb_fill_bulk_urb(port->read_urb, dev,
246 usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
247 port->bulk_in_buffer,
248 port->bulk_in_size,
249 ipw_read_bulk_callback, port);
250 result = usb_submit_urb(port->read_urb, GFP_KERNEL);
251 if (result < 0)
252 dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
253
254 /*--3: Tell the modem to open the floodgates on the rx bulk channel */
255 dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__);
256 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
257 IPW_SIO_RXCTL,
258 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
259 IPW_RXBULK_ON,
260 0, /* index */
261 NULL,
262 0,
263 100000);
264 if (result < 0)
265 dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
266
267 /*--4: setup the initial flowcontrol */
268 dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
269 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
270 IPW_SIO_HANDFLOW,
271 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
272 0,
273 0,
274 buf_flow_init,
275 0x10,
276 200000);
277 if (result < 0)
278 dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
279
280
281 /*--5: raise the dtr */
282 dbg("%s:raising dtr",__FUNCTION__);
283 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
284 IPW_SIO_SET_PIN,
285 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
286 IPW_PIN_SETDTR,
287 0,
288 NULL,
289 0,
290 200000);
291 if (result < 0)
292 dev_err(&port->dev, "setting dtr failed (error = %d)", result);
293
294 /*--6: raise the rts */
295 dbg("%s:raising rts",__FUNCTION__);
296 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
297 IPW_SIO_SET_PIN,
298 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
299 IPW_PIN_SETRTS,
300 0,
301 NULL,
302 0,
303 200000);
304 if (result < 0)
305 dev_err(&port->dev, "setting dtr failed (error = %d)", result);
306
307 kfree(buf_flow_init);
308 return 0;
309 }
310
311 static void ipw_close(struct usb_serial_port *port, struct file * filp)
312 {
313 struct usb_device *dev = port->serial->dev;
314 int result;
315
316 if (tty_hung_up_p(filp)) {
317 dbg("%s: tty_hung_up_p ...", __FUNCTION__);
318 return;
319 }
320
321 /*--1: drop the dtr */
322 dbg("%s:dropping dtr",__FUNCTION__);
323 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
324 IPW_SIO_SET_PIN,
325 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
326 IPW_PIN_CLRDTR,
327 0,
328 NULL,
329 0,
330 200000);
331 if (result < 0)
332 dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
333
334 /*--2: drop the rts */
335 dbg("%s:dropping rts",__FUNCTION__);
336 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
337 IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
338 IPW_PIN_CLRRTS,
339 0,
340 NULL,
341 0,
342 200000);
343 if (result < 0)
344 dev_err(&port->dev, "dropping rts failed (error = %d)", result);
345
346
347 /*--3: purge */
348 dbg("%s:sending purge",__FUNCTION__);
349 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
350 IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
351 0x03,
352 0,
353 NULL,
354 0,
355 200000);
356 if (result < 0)
357 dev_err(&port->dev, "purge failed (error = %d)", result);
358
359
360 /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
361 result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
362 IPW_SIO_RXCTL,
363 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
364 IPW_RXBULK_OFF,
365 0, /* index */
366 NULL,
367 0,
368 100000);
369
370 if (result < 0)
371 dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
372
373 /* shutdown any in-flight urbs that we know about */
374 usb_kill_urb(port->read_urb);
375 usb_kill_urb(port->write_urb);
376 }
377
378 static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
379 {
380 struct usb_serial_port *port = urb->context;
381
382 dbg("%s", __FUNCTION__);
383
384 if (urb->status)
385 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
386
387 schedule_work(&port->work);
388 }
389
390 static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
391 {
392 struct usb_device *dev = port->serial->dev;
393 int ret;
394
395 dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__,
396 count, in_interrupt() );
397
398 if (count == 0) {
399 dbg("%s - write request of 0 bytes", __FUNCTION__);
400 return 0;
401 }
402
403 /* Racy and broken, FIXME properly! */
404 if (port->write_urb->status == -EINPROGRESS)
405 return 0;
406
407 count = min(count, port->bulk_out_size);
408 memcpy(port->bulk_out_buffer, buf, count);
409
410 dbg("%s count now:%d", __FUNCTION__, count);
411
412 usb_fill_bulk_urb(port->write_urb, dev,
413 usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
414 port->write_urb->transfer_buffer,
415 count,
416 ipw_write_bulk_callback,
417 port);
418
419 ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
420 if (ret != 0) {
421 dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret);
422 return ret;
423 }
424
425 dbg("%s returning %d", __FUNCTION__, count);
426 return count;
427 }
428
429 static int ipw_probe(struct usb_serial_port *port)
430 {
431 return 0;
432 }
433
434 static int ipw_disconnect(struct usb_serial_port *port)
435 {
436 usb_set_serial_port_data(port, NULL);
437 return 0;
438 }
439
440 static struct usb_serial_device_type ipw_device = {
441 .owner = THIS_MODULE,
442 .name = "IPWireless converter",
443 .short_name = "ipw",
444 .id_table = usb_ipw_ids,
445 .num_interrupt_in = NUM_DONT_CARE,
446 .num_bulk_in = 1,
447 .num_bulk_out = 1,
448 .num_ports = 1,
449 .open = ipw_open,
450 .close = ipw_close,
451 .port_probe = ipw_probe,
452 .port_remove = ipw_disconnect,
453 .write = ipw_write,
454 .write_bulk_callback = ipw_write_bulk_callback,
455 .read_bulk_callback = ipw_read_bulk_callback,
456 };
457
458
459
460 static int usb_ipw_init(void)
461 {
462 int retval;
463
464 retval = usb_serial_register(&ipw_device);
465 if (retval)
466 return retval;
467 retval = usb_register(&usb_ipw_driver);
468 if (retval) {
469 usb_serial_deregister(&ipw_device);
470 return retval;
471 }
472 info(DRIVER_DESC " " DRIVER_VERSION);
473 return 0;
474 }
475
476 static void usb_ipw_exit(void)
477 {
478 usb_deregister(&usb_ipw_driver);
479 usb_serial_deregister(&ipw_device);
480 }
481
482 module_init(usb_ipw_init);
483 module_exit(usb_ipw_exit);
484
485 /* Module information */
486 MODULE_AUTHOR( DRIVER_AUTHOR );
487 MODULE_DESCRIPTION( DRIVER_DESC );
488 MODULE_LICENSE("GPL");
489
490 module_param(debug, bool, S_IRUGO | S_IWUSR);
491 MODULE_PARM_DESC(debug, "Debug enabled or not");
linux-next