1 /******************************************************************************
3 * Name: actbl1.h - ACPI 1.0 tables
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2005, R. Byron Moore
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
50 * ACPI 1.0 Root System Description Table (RSDT)
52 struct rsdt_descriptor_rev1
54 ACPI_TABLE_HEADER_DEF
/* ACPI common table header */
55 u32 table_offset_entry
[1]; /* Array of pointers to other */
61 * ACPI 1.0 Firmware ACPI Control Structure (FACS)
63 struct facs_descriptor_rev1
65 char signature
[4]; /* ACPI Signature */
66 u32 length
; /* Length of structure, in bytes */
67 u32 hardware_signature
; /* Hardware configuration signature */
68 u32 firmware_waking_vector
; /* ACPI OS waking vector */
69 u32 global_lock
; /* Global Lock */
70 u32 S4bios_f
: 1; /* Indicates if S4BIOS support is present */
71 u32 reserved1
: 31; /* Must be 0 */
72 u8 resverved3
[40]; /* Reserved - must be zero */
77 * ACPI 1.0 Fixed ACPI Description Table (FADT)
79 struct fadt_descriptor_rev1
81 ACPI_TABLE_HEADER_DEF
/* ACPI common table header */
82 u32 firmware_ctrl
; /* Physical address of FACS */
83 u32 dsdt
; /* Physical address of DSDT */
84 u8 model
; /* System Interrupt Model */
85 u8 reserved1
; /* Reserved */
86 u16 sci_int
; /* System vector of SCI interrupt */
87 u32 smi_cmd
; /* Port address of SMI command port */
88 u8 acpi_enable
; /* Value to write to smi_cmd to enable ACPI */
89 u8 acpi_disable
; /* Value to write to smi_cmd to disable ACPI */
90 u8 S4bios_req
; /* Value to write to SMI CMD to enter S4BIOS state */
91 u8 reserved2
; /* Reserved - must be zero */
92 u32 pm1a_evt_blk
; /* Port address of Power Mgt 1a acpi_event Reg Blk */
93 u32 pm1b_evt_blk
; /* Port address of Power Mgt 1b acpi_event Reg Blk */
94 u32 pm1a_cnt_blk
; /* Port address of Power Mgt 1a Control Reg Blk */
95 u32 pm1b_cnt_blk
; /* Port address of Power Mgt 1b Control Reg Blk */
96 u32 pm2_cnt_blk
; /* Port address of Power Mgt 2 Control Reg Blk */
97 u32 pm_tmr_blk
; /* Port address of Power Mgt Timer Ctrl Reg Blk */
98 u32 gpe0_blk
; /* Port addr of General Purpose acpi_event 0 Reg Blk */
99 u32 gpe1_blk
; /* Port addr of General Purpose acpi_event 1 Reg Blk */
100 u8 pm1_evt_len
; /* Byte length of ports at pm1_x_evt_blk */
101 u8 pm1_cnt_len
; /* Byte length of ports at pm1_x_cnt_blk */
102 u8 pm2_cnt_len
; /* Byte Length of ports at pm2_cnt_blk */
103 u8 pm_tm_len
; /* Byte Length of ports at pm_tm_blk */
104 u8 gpe0_blk_len
; /* Byte Length of ports at gpe0_blk */
105 u8 gpe1_blk_len
; /* Byte Length of ports at gpe1_blk */
106 u8 gpe1_base
; /* Offset in gpe model where gpe1 events start */
107 u8 reserved3
; /* Reserved */
108 u16 plvl2_lat
; /* Worst case HW latency to enter/exit C2 state */
109 u16 plvl3_lat
; /* Worst case HW latency to enter/exit C3 state */
110 u16 flush_size
; /* Size of area read to flush caches */
111 u16 flush_stride
; /* Stride used in flushing caches */
112 u8 duty_offset
; /* Bit location of duty cycle field in p_cnt reg */
113 u8 duty_width
; /* Bit width of duty cycle field in p_cnt reg */
114 u8 day_alrm
; /* Index to day-of-month alarm in RTC CMOS RAM */
115 u8 mon_alrm
; /* Index to month-of-year alarm in RTC CMOS RAM */
116 u8 century
; /* Index to century in RTC CMOS RAM */
117 u8 reserved4
; /* Reserved */
118 u8 reserved4a
; /* Reserved */
119 u8 reserved4b
; /* Reserved */
120 u32 wb_invd
: 1; /* The wbinvd instruction works properly */
121 u32 wb_invd_flush
: 1; /* The wbinvd flushes but does not invalidate */
122 u32 proc_c1
: 1; /* All processors support C1 state */
123 u32 plvl2_up
: 1; /* C2 state works on MP system */
124 u32 pwr_button
: 1; /* Power button is handled as a generic feature */
125 u32 sleep_button
: 1; /* Sleep button is handled as a generic feature, or not present */
126 u32 fixed_rTC
: 1; /* RTC wakeup stat not in fixed register space */
127 u32 rtcs4
: 1; /* RTC wakeup stat not possible from S4 */
128 u32 tmr_val_ext
: 1; /* The tmr_val width is 32 bits (0 = 24 bits) */
129 u32 reserved5
: 23; /* Reserved - must be zero */
134 #endif /* __ACTBL1_H__ */