include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / arch / blackfin / mach-bf537 / boards / tcm_bf537.c
blob9b7287abdfa19325d52a2107cba1808ea9b10996
1 /*
2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2008-2009 Bluetechnix
4 * 2005 National ICT Australia (NICTA)
5 * Aidan Williams <aidan@nicta.com.au>
7 * Licensed under the GPL-2 or later.
8 */
10 #include <linux/device.h>
11 #include <linux/etherdevice.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/spi/spi.h>
17 #include <linux/spi/flash.h>
18 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
19 #include <linux/usb/isp1362.h>
20 #endif
21 #include <linux/ata_platform.h>
22 #include <linux/irq.h>
23 #include <asm/dma.h>
24 #include <asm/bfin5xx_spi.h>
25 #include <asm/portmux.h>
26 #include <asm/dpmc.h>
27 #include <linux/spi/mmc_spi.h>
30 * Name the Board for the /proc/cpuinfo
32 const char bfin_board_name[] = "Bluetechnix TCM BF537";
34 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
35 /* all SPI peripherals info goes here */
37 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
38 static struct mtd_partition bfin_spi_flash_partitions[] = {
40 .name = "bootloader(spi)",
41 .size = 0x00020000,
42 .offset = 0,
43 .mask_flags = MTD_CAP_ROM
44 }, {
45 .name = "linux kernel(spi)",
46 .size = 0xe0000,
47 .offset = 0x20000
48 }, {
49 .name = "file system(spi)",
50 .size = 0x700000,
51 .offset = 0x00100000,
55 static struct flash_platform_data bfin_spi_flash_data = {
56 .name = "m25p80",
57 .parts = bfin_spi_flash_partitions,
58 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
59 .type = "m25p64",
62 /* SPI flash chip (m25p64) */
63 static struct bfin5xx_spi_chip spi_flash_chip_info = {
64 .enable_dma = 0, /* use dma transfer with this chip*/
66 #endif
68 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
69 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
70 .enable_dma = 0,
72 #endif
74 static struct spi_board_info bfin_spi_board_info[] __initdata = {
75 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
77 /* the modalias must be the same as spi device driver name */
78 .modalias = "m25p80", /* Name of spi_driver for this device */
79 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
80 .bus_num = 0, /* Framework bus number */
81 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
82 .platform_data = &bfin_spi_flash_data,
83 .controller_data = &spi_flash_chip_info,
84 .mode = SPI_MODE_3,
86 #endif
88 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
90 .modalias = "ad183x",
91 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
92 .bus_num = 0,
93 .chip_select = 4,
95 #endif
97 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
99 .modalias = "mmc_spi",
100 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
101 .bus_num = 0,
102 .chip_select = 1,
103 .controller_data = &mmc_spi_chip_info,
104 .mode = SPI_MODE_3,
106 #endif
109 /* SPI (0) */
110 static struct resource bfin_spi0_resource[] = {
111 [0] = {
112 .start = SPI0_REGBASE,
113 .end = SPI0_REGBASE + 0xFF,
114 .flags = IORESOURCE_MEM,
116 [1] = {
117 .start = CH_SPI,
118 .end = CH_SPI,
119 .flags = IORESOURCE_DMA,
121 [2] = {
122 .start = IRQ_SPI,
123 .end = IRQ_SPI,
124 .flags = IORESOURCE_IRQ,
128 /* SPI controller data */
129 static struct bfin5xx_spi_master bfin_spi0_info = {
130 .num_chipselect = 8,
131 .enable_dma = 1, /* master has the ability to do dma transfer */
132 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
135 static struct platform_device bfin_spi0_device = {
136 .name = "bfin-spi",
137 .id = 0, /* Bus number */
138 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
139 .resource = bfin_spi0_resource,
140 .dev = {
141 .platform_data = &bfin_spi0_info, /* Passed to driver */
144 #endif /* spi master and devices */
146 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
147 static struct platform_device rtc_device = {
148 .name = "rtc-bfin",
149 .id = -1,
151 #endif
153 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
154 static struct platform_device hitachi_fb_device = {
155 .name = "hitachi-tx09",
157 #endif
159 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
160 #include <linux/smc91x.h>
162 static struct smc91x_platdata smc91x_info = {
163 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
164 .leda = RPC_LED_100_10,
165 .ledb = RPC_LED_TX_RX,
168 static struct resource smc91x_resources[] = {
170 .start = 0x20200300,
171 .end = 0x20200300 + 16,
172 .flags = IORESOURCE_MEM,
173 }, {
174 .start = IRQ_PF14,
175 .end = IRQ_PF14,
176 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
180 static struct platform_device smc91x_device = {
181 .name = "smc91x",
182 .id = 0,
183 .num_resources = ARRAY_SIZE(smc91x_resources),
184 .resource = smc91x_resources,
185 .dev = {
186 .platform_data = &smc91x_info,
189 #endif
191 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
192 static struct resource isp1362_hcd_resources[] = {
194 .start = 0x20308000,
195 .end = 0x20308000,
196 .flags = IORESOURCE_MEM,
197 }, {
198 .start = 0x20308004,
199 .end = 0x20308004,
200 .flags = IORESOURCE_MEM,
201 }, {
202 .start = IRQ_PG15,
203 .end = IRQ_PG15,
204 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
208 static struct isp1362_platform_data isp1362_priv = {
209 .sel15Kres = 1,
210 .clknotstop = 0,
211 .oc_enable = 0,
212 .int_act_high = 0,
213 .int_edge_triggered = 0,
214 .remote_wakeup_connected = 0,
215 .no_power_switching = 1,
216 .power_switching_mode = 0,
219 static struct platform_device isp1362_hcd_device = {
220 .name = "isp1362-hcd",
221 .id = 0,
222 .dev = {
223 .platform_data = &isp1362_priv,
225 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
226 .resource = isp1362_hcd_resources,
228 #endif
230 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
231 static struct resource net2272_bfin_resources[] = {
233 .start = 0x20300000,
234 .end = 0x20300000 + 0x100,
235 .flags = IORESOURCE_MEM,
236 }, {
237 .start = IRQ_PG13,
238 .end = IRQ_PG13,
239 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
243 static struct platform_device net2272_bfin_device = {
244 .name = "net2272",
245 .id = -1,
246 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
247 .resource = net2272_bfin_resources,
249 #endif
251 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
252 static struct mtd_partition cm_partitions[] = {
254 .name = "bootloader(nor)",
255 .size = 0x40000,
256 .offset = 0,
257 }, {
258 .name = "linux kernel(nor)",
259 .size = 0x100000,
260 .offset = MTDPART_OFS_APPEND,
261 }, {
262 .name = "file system(nor)",
263 .size = MTDPART_SIZ_FULL,
264 .offset = MTDPART_OFS_APPEND,
268 static struct physmap_flash_data cm_flash_data = {
269 .width = 2,
270 .parts = cm_partitions,
271 .nr_parts = ARRAY_SIZE(cm_partitions),
274 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
276 static struct resource cm_flash_resource[] = {
278 .name = "cfi_probe",
279 .start = 0x20000000,
280 .end = 0x201fffff,
281 .flags = IORESOURCE_MEM,
282 }, {
283 .start = (unsigned long)cm_flash_gpios,
284 .end = ARRAY_SIZE(cm_flash_gpios),
285 .flags = IORESOURCE_IRQ,
289 static struct platform_device cm_flash_device = {
290 .name = "gpio-addr-flash",
291 .id = 0,
292 .dev = {
293 .platform_data = &cm_flash_data,
295 .num_resources = ARRAY_SIZE(cm_flash_resource),
296 .resource = cm_flash_resource,
298 #endif
300 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
301 #ifdef CONFIG_SERIAL_BFIN_UART0
302 static struct resource bfin_uart0_resources[] = {
304 .start = UART0_THR,
305 .end = UART0_GCTL+2,
306 .flags = IORESOURCE_MEM,
309 .start = IRQ_UART0_RX,
310 .end = IRQ_UART0_RX+1,
311 .flags = IORESOURCE_IRQ,
314 .start = IRQ_UART0_ERROR,
315 .end = IRQ_UART0_ERROR,
316 .flags = IORESOURCE_IRQ,
319 .start = CH_UART0_TX,
320 .end = CH_UART0_TX,
321 .flags = IORESOURCE_DMA,
324 .start = CH_UART0_RX,
325 .end = CH_UART0_RX,
326 .flags = IORESOURCE_DMA,
330 static unsigned short bfin_uart0_peripherals[] = {
331 P_UART0_TX, P_UART0_RX, 0
334 static struct platform_device bfin_uart0_device = {
335 .name = "bfin-uart",
336 .id = 0,
337 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
338 .resource = bfin_uart0_resources,
339 .dev = {
340 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
343 #endif
344 #ifdef CONFIG_SERIAL_BFIN_UART1
345 static struct resource bfin_uart1_resources[] = {
347 .start = UART1_THR,
348 .end = UART1_GCTL+2,
349 .flags = IORESOURCE_MEM,
352 .start = IRQ_UART1_RX,
353 .end = IRQ_UART1_RX+1,
354 .flags = IORESOURCE_IRQ,
357 .start = IRQ_UART1_ERROR,
358 .end = IRQ_UART1_ERROR,
359 .flags = IORESOURCE_IRQ,
362 .start = CH_UART1_TX,
363 .end = CH_UART1_TX,
364 .flags = IORESOURCE_DMA,
367 .start = CH_UART1_RX,
368 .end = CH_UART1_RX,
369 .flags = IORESOURCE_DMA,
373 static unsigned short bfin_uart1_peripherals[] = {
374 P_UART1_TX, P_UART1_RX, 0
377 static struct platform_device bfin_uart1_device = {
378 .name = "bfin-uart",
379 .id = 1,
380 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
381 .resource = bfin_uart1_resources,
382 .dev = {
383 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
386 #endif
387 #endif
389 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
390 #ifdef CONFIG_BFIN_SIR0
391 static struct resource bfin_sir0_resources[] = {
393 .start = 0xFFC00400,
394 .end = 0xFFC004FF,
395 .flags = IORESOURCE_MEM,
398 .start = IRQ_UART0_RX,
399 .end = IRQ_UART0_RX+1,
400 .flags = IORESOURCE_IRQ,
403 .start = CH_UART0_RX,
404 .end = CH_UART0_RX+1,
405 .flags = IORESOURCE_DMA,
409 static struct platform_device bfin_sir0_device = {
410 .name = "bfin_sir",
411 .id = 0,
412 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
413 .resource = bfin_sir0_resources,
415 #endif
416 #ifdef CONFIG_BFIN_SIR1
417 static struct resource bfin_sir1_resources[] = {
419 .start = 0xFFC02000,
420 .end = 0xFFC020FF,
421 .flags = IORESOURCE_MEM,
424 .start = IRQ_UART1_RX,
425 .end = IRQ_UART1_RX+1,
426 .flags = IORESOURCE_IRQ,
429 .start = CH_UART1_RX,
430 .end = CH_UART1_RX+1,
431 .flags = IORESOURCE_DMA,
435 static struct platform_device bfin_sir1_device = {
436 .name = "bfin_sir",
437 .id = 1,
438 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
439 .resource = bfin_sir1_resources,
441 #endif
442 #endif
444 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
445 static struct resource bfin_twi0_resource[] = {
446 [0] = {
447 .start = TWI0_REGBASE,
448 .end = TWI0_REGBASE,
449 .flags = IORESOURCE_MEM,
451 [1] = {
452 .start = IRQ_TWI,
453 .end = IRQ_TWI,
454 .flags = IORESOURCE_IRQ,
458 static struct platform_device i2c_bfin_twi_device = {
459 .name = "i2c-bfin-twi",
460 .id = 0,
461 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
462 .resource = bfin_twi0_resource,
464 #endif
466 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
467 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
468 static struct resource bfin_sport0_uart_resources[] = {
470 .start = SPORT0_TCR1,
471 .end = SPORT0_MRCS3+4,
472 .flags = IORESOURCE_MEM,
475 .start = IRQ_SPORT0_RX,
476 .end = IRQ_SPORT0_RX+1,
477 .flags = IORESOURCE_IRQ,
480 .start = IRQ_SPORT0_ERROR,
481 .end = IRQ_SPORT0_ERROR,
482 .flags = IORESOURCE_IRQ,
486 static unsigned short bfin_sport0_peripherals[] = {
487 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
488 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
491 static struct platform_device bfin_sport0_uart_device = {
492 .name = "bfin-sport-uart",
493 .id = 0,
494 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
495 .resource = bfin_sport0_uart_resources,
496 .dev = {
497 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
500 #endif
501 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
502 static struct resource bfin_sport1_uart_resources[] = {
504 .start = SPORT1_TCR1,
505 .end = SPORT1_MRCS3+4,
506 .flags = IORESOURCE_MEM,
509 .start = IRQ_SPORT1_RX,
510 .end = IRQ_SPORT1_RX+1,
511 .flags = IORESOURCE_IRQ,
514 .start = IRQ_SPORT1_ERROR,
515 .end = IRQ_SPORT1_ERROR,
516 .flags = IORESOURCE_IRQ,
520 static unsigned short bfin_sport1_peripherals[] = {
521 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
522 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
525 static struct platform_device bfin_sport1_uart_device = {
526 .name = "bfin-sport-uart",
527 .id = 1,
528 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
529 .resource = bfin_sport1_uart_resources,
530 .dev = {
531 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
534 #endif
535 #endif
537 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
538 #include <linux/bfin_mac.h>
539 static const unsigned short bfin_mac_peripherals[] = P_MII0;
541 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
543 .addr = 1,
544 .irq = IRQ_MAC_PHYINT,
548 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
549 .phydev_number = 1,
550 .phydev_data = bfin_phydev_data,
551 .phy_mode = PHY_INTERFACE_MODE_MII,
552 .mac_peripherals = bfin_mac_peripherals,
555 static struct platform_device bfin_mii_bus = {
556 .name = "bfin_mii_bus",
557 .dev = {
558 .platform_data = &bfin_mii_bus_data,
562 static struct platform_device bfin_mac_device = {
563 .name = "bfin_mac",
564 .dev = {
565 .platform_data = &bfin_mii_bus,
568 #endif
570 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
571 #define PATA_INT IRQ_PF14
573 static struct pata_platform_info bfin_pata_platform_data = {
574 .ioport_shift = 2,
575 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
578 static struct resource bfin_pata_resources[] = {
580 .start = 0x2030C000,
581 .end = 0x2030C01F,
582 .flags = IORESOURCE_MEM,
585 .start = 0x2030D018,
586 .end = 0x2030D01B,
587 .flags = IORESOURCE_MEM,
590 .start = PATA_INT,
591 .end = PATA_INT,
592 .flags = IORESOURCE_IRQ,
596 static struct platform_device bfin_pata_device = {
597 .name = "pata_platform",
598 .id = -1,
599 .num_resources = ARRAY_SIZE(bfin_pata_resources),
600 .resource = bfin_pata_resources,
601 .dev = {
602 .platform_data = &bfin_pata_platform_data,
605 #endif
607 static const unsigned int cclk_vlev_datasheet[] =
609 VRPAIR(VLEV_085, 250000000),
610 VRPAIR(VLEV_090, 376000000),
611 VRPAIR(VLEV_095, 426000000),
612 VRPAIR(VLEV_100, 426000000),
613 VRPAIR(VLEV_105, 476000000),
614 VRPAIR(VLEV_110, 476000000),
615 VRPAIR(VLEV_115, 476000000),
616 VRPAIR(VLEV_120, 500000000),
617 VRPAIR(VLEV_125, 533000000),
618 VRPAIR(VLEV_130, 600000000),
621 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
622 .tuple_tab = cclk_vlev_datasheet,
623 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
624 .vr_settling_time = 25 /* us */,
627 static struct platform_device bfin_dpmc = {
628 .name = "bfin dpmc",
629 .dev = {
630 .platform_data = &bfin_dmpc_vreg_data,
634 static struct platform_device *cm_bf537_devices[] __initdata = {
636 &bfin_dpmc,
638 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
639 &hitachi_fb_device,
640 #endif
642 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
643 &rtc_device,
644 #endif
646 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
647 #ifdef CONFIG_SERIAL_BFIN_UART0
648 &bfin_uart0_device,
649 #endif
650 #ifdef CONFIG_SERIAL_BFIN_UART1
651 &bfin_uart1_device,
652 #endif
653 #endif
655 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
656 #ifdef CONFIG_BFIN_SIR0
657 &bfin_sir0_device,
658 #endif
659 #ifdef CONFIG_BFIN_SIR1
660 &bfin_sir1_device,
661 #endif
662 #endif
664 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
665 &i2c_bfin_twi_device,
666 #endif
668 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
669 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
670 &bfin_sport0_uart_device,
671 #endif
672 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
673 &bfin_sport1_uart_device,
674 #endif
675 #endif
677 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
678 &isp1362_hcd_device,
679 #endif
681 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
682 &smc91x_device,
683 #endif
685 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
686 &bfin_mii_bus,
687 &bfin_mac_device,
688 #endif
690 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
691 &net2272_bfin_device,
692 #endif
694 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
695 &bfin_spi0_device,
696 #endif
698 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
699 &bfin_pata_device,
700 #endif
702 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
703 &cm_flash_device,
704 #endif
707 static int __init net2272_init(void)
709 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
710 int ret;
712 ret = gpio_request(GPIO_PG14, "net2272");
713 if (ret)
714 return ret;
716 /* Reset USB Chip, PG14 */
717 gpio_direction_output(GPIO_PG14, 0);
718 mdelay(2);
719 gpio_set_value(GPIO_PG14, 1);
720 #endif
722 return 0;
725 static int __init tcm_bf537_init(void)
727 printk(KERN_INFO "%s(): registering device resources\n", __func__);
728 platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
729 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
730 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
731 #endif
733 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
734 irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
735 #endif
737 if (net2272_init())
738 pr_warning("unable to configure net2272; it probably won't work\n");
740 return 0;
743 arch_initcall(tcm_bf537_init);
745 static struct platform_device *cm_bf537_early_devices[] __initdata = {
746 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
747 #ifdef CONFIG_SERIAL_BFIN_UART0
748 &bfin_uart0_device,
749 #endif
750 #ifdef CONFIG_SERIAL_BFIN_UART1
751 &bfin_uart1_device,
752 #endif
753 #endif
755 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
756 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
757 &bfin_sport0_uart_device,
758 #endif
759 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
760 &bfin_sport1_uart_device,
761 #endif
762 #endif
765 void __init native_machine_early_platform_add_devices(void)
767 printk(KERN_INFO "register early platform devices\n");
768 early_platform_add_devices(cm_bf537_early_devices,
769 ARRAY_SIZE(cm_bf537_early_devices));
772 void bfin_get_ether_addr(char *addr)
774 random_ether_addr(addr);
775 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
777 EXPORT_SYMBOL(bfin_get_ether_addr);