?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / mfd / wm8350-core.c
blobe81cc31e42020a8ceff6620d73b3f251ca6aeffd
1 /*
2 * wm8350-core.c -- Device access for Wolfson WM8350
3 *
4 * Copyright 2007, 2008 Wolfson Microelectronics PLC.
5 *
6 * Author: Liam Girdwood, Mark Brown
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/slab.h>
19 #include <linux/bug.h>
20 #include <linux/device.h>
21 #include <linux/delay.h>
22 #include <linux/interrupt.h>
23 #include <linux/workqueue.h>
24
25 #include <linux/mfd/wm8350/core.h>
26 #include <linux/mfd/wm8350/audio.h>
27 #include <linux/mfd/wm8350/comparator.h>
28 #include <linux/mfd/wm8350/gpio.h>
29 #include <linux/mfd/wm8350/pmic.h>
30 #include <linux/mfd/wm8350/rtc.h>
31 #include <linux/mfd/wm8350/supply.h>
32 #include <linux/mfd/wm8350/wdt.h>
33
34 #define WM8350_UNLOCK_KEY 0x0013
35 #define WM8350_LOCK_KEY 0x0000
36
37 #define WM8350_CLOCK_CONTROL_1 0x28
38 #define WM8350_AIF_TEST 0x74
39
40 /* debug */
41 #define WM8350_BUS_DEBUG 0
42 #if WM8350_BUS_DEBUG
43 #define dump(regs, src) do { \
44 int i_; \
45 u16 *src_ = src; \
46 printk(KERN_DEBUG); \
47 for (i_ = 0; i_ < regs; i_++) \
48 printk(" 0x%4.4x", *src_++); \
49 printk("\n"); \
50 } while (0);
51 #else
52 #define dump(bytes, src)
53 #endif
54
55 #define WM8350_LOCK_DEBUG 0
56 #if WM8350_LOCK_DEBUG
57 #define ldbg(format, arg...) printk(format, ## arg)
58 #else
59 #define ldbg(format, arg...)
60 #endif
61
62 /*
63 * WM8350 Device IO
64 */
65 static DEFINE_MUTEX(io_mutex);
66 static DEFINE_MUTEX(reg_lock_mutex);
67
68 /* Perform a physical read from the device.
69 */
70 static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
71 u16 *dest)
72 {
73 int i, ret;
74 int bytes = num_regs * 2;
75
76 dev_dbg(wm8350->dev, "volatile read\n");
77 ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest);
78
79 for (i = reg; i < reg + num_regs; i++) {
80 /* Cache is CPU endian */
81 dest[i - reg] = be16_to_cpu(dest[i - reg]);
82
83 /* Mask out non-readable bits */
84 dest[i - reg] &= wm8350_reg_io_map[i].readable;
85 }
86
87 dump(num_regs, dest);
88
89 return ret;
90 }
91
92 static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
93 {
94 int i;
95 int end = reg + num_regs;
96 int ret = 0;
97 int bytes = num_regs * 2;
98
99 if (wm8350->read_dev == NULL)
100 return -ENODEV;
101
102 if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
103 dev_err(wm8350->dev, "invalid reg %x\n",
104 reg + num_regs - 1);
105 return -EINVAL;
106 }
107
108 dev_dbg(wm8350->dev,
109 "%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
110
111 #if WM8350_BUS_DEBUG
112 /* we can _safely_ read any register, but warn if read not supported */
113 for (i = reg; i < end; i++) {
114 if (!wm8350_reg_io_map[i].readable)
115 dev_warn(wm8350->dev,
116 "reg R%d is not readable\n", i);
117 }
118 #endif
119
120 /* if any volatile registers are required, then read back all */
121 for (i = reg; i < end; i++)
122 if (wm8350_reg_io_map[i].vol)
123 return wm8350_phys_read(wm8350, reg, num_regs, dest);
124
125 /* no volatiles, then cache is good */
126 dev_dbg(wm8350->dev, "cache read\n");
127 memcpy(dest, &wm8350->reg_cache[reg], bytes);
128 dump(num_regs, dest);
129 return ret;
130 }
131
132 static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
133 {
134 if (reg == WM8350_SECURITY ||
135 wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
136 return 0;
137
138 if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
139 reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
140 (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
141 reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
142 return 1;
143 return 0;
144 }
145
146 static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
147 {
148 int i;
149 int end = reg + num_regs;
150 int bytes = num_regs * 2;
151
152 if (wm8350->write_dev == NULL)
153 return -ENODEV;
154
155 if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
156 dev_err(wm8350->dev, "invalid reg %x\n",
157 reg + num_regs - 1);
158 return -EINVAL;
159 }
160
161 /* it's generally not a good idea to write to RO or locked registers */
162 for (i = reg; i < end; i++) {
163 if (!wm8350_reg_io_map[i].writable) {
164 dev_err(wm8350->dev,
165 "attempted write to read only reg R%d\n", i);
166 return -EINVAL;
167 }
168
169 if (is_reg_locked(wm8350, i)) {
170 dev_err(wm8350->dev,
171 "attempted write to locked reg R%d\n", i);
172 return -EINVAL;
173 }
174
175 src[i - reg] &= wm8350_reg_io_map[i].writable;
176
177 wm8350->reg_cache[i] =
178 (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
179 | src[i - reg];
180
181 src[i - reg] = cpu_to_be16(src[i - reg]);
182 }
183
184 /* Actually write it out */
185 return wm8350->write_dev(wm8350, reg, bytes, (char *)src);
186 }
187
188 /*
189 * Safe read, modify, write methods
190 */
191 int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
192 {
193 u16 data;
194 int err;
195
196 mutex_lock(&io_mutex);
197 err = wm8350_read(wm8350, reg, 1, &data);
198 if (err) {
199 dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
200 goto out;
201 }
202
203 data &= ~mask;
204 err = wm8350_write(wm8350, reg, 1, &data);
205 if (err)
206 dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
207 out:
208 mutex_unlock(&io_mutex);
209 return err;
210 }
211 EXPORT_SYMBOL_GPL(wm8350_clear_bits);
212
213 int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
214 {
215 u16 data;
216 int err;
217
218 mutex_lock(&io_mutex);
219 err = wm8350_read(wm8350, reg, 1, &data);
220 if (err) {
221 dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
222 goto out;
223 }
224
225 data |= mask;
226 err = wm8350_write(wm8350, reg, 1, &data);
227 if (err)
228 dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
229 out:
230 mutex_unlock(&io_mutex);
231 return err;
232 }
233 EXPORT_SYMBOL_GPL(wm8350_set_bits);
234
235 u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
236 {
237 u16 data;
238 int err;
239
240 mutex_lock(&io_mutex);
241 err = wm8350_read(wm8350, reg, 1, &data);
242 if (err)
243 dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
244
245 mutex_unlock(&io_mutex);
246 return data;
247 }
248 EXPORT_SYMBOL_GPL(wm8350_reg_read);
249
250 int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
251 {
252 int ret;
253 u16 data = val;
254
255 mutex_lock(&io_mutex);
256 ret = wm8350_write(wm8350, reg, 1, &data);
257 if (ret)
258 dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
259 mutex_unlock(&io_mutex);
260 return ret;
261 }
262 EXPORT_SYMBOL_GPL(wm8350_reg_write);
263
264 int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
265 u16 *dest)
266 {
267 int err = 0;
268
269 mutex_lock(&io_mutex);
270 err = wm8350_read(wm8350, start_reg, regs, dest);
271 if (err)
272 dev_err(wm8350->dev, "block read starting from R%d failed\n",
273 start_reg);
274 mutex_unlock(&io_mutex);
275 return err;
276 }
277 EXPORT_SYMBOL_GPL(wm8350_block_read);
278
279 int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
280 u16 *src)
281 {
282 int ret = 0;
283
284 mutex_lock(&io_mutex);
285 ret = wm8350_write(wm8350, start_reg, regs, src);
286 if (ret)
287 dev_err(wm8350->dev, "block write starting at R%d failed\n",
288 start_reg);
289 mutex_unlock(&io_mutex);
290 return ret;
291 }
292 EXPORT_SYMBOL_GPL(wm8350_block_write);
293
294 /**
295 * wm8350_reg_lock()
296 *
297 * The WM8350 has a hardware lock which can be used to prevent writes to
298 * some registers (generally those which can cause particularly serious
299 * problems if misused). This function enables that lock.
300 */
301 int wm8350_reg_lock(struct wm8350 *wm8350)
302 {
303 u16 key = WM8350_LOCK_KEY;
304 int ret;
305
306 ldbg(__func__);
307 mutex_lock(&io_mutex);
308 ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
309 if (ret)
310 dev_err(wm8350->dev, "lock failed\n");
311 mutex_unlock(&io_mutex);
312 return ret;
313 }
314 EXPORT_SYMBOL_GPL(wm8350_reg_lock);
315
316 /**
317 * wm8350_reg_unlock()
318 *
319 * The WM8350 has a hardware lock which can be used to prevent writes to
320 * some registers (generally those which can cause particularly serious
321 * problems if misused). This function disables that lock so updates
322 * can be performed. For maximum safety this should be done only when
323 * required.
324 */
325 int wm8350_reg_unlock(struct wm8350 *wm8350)
326 {
327 u16 key = WM8350_UNLOCK_KEY;
328 int ret;
329
330 ldbg(__func__);
331 mutex_lock(&io_mutex);
332 ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
333 if (ret)
334 dev_err(wm8350->dev, "unlock failed\n");
335 mutex_unlock(&io_mutex);
336 return ret;
337 }
338 EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
339
340 int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
341 {
342 u16 reg, result = 0;
343
344 if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
345 return -EINVAL;
346 if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
347 && (scale != 0 || vref != 0))
348 return -EINVAL;
349
350 mutex_lock(&wm8350->auxadc_mutex);
351
352 /* Turn on the ADC */
353 reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
354 wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
355
356 if (scale || vref) {
357 reg = scale << 13;
358 reg |= vref << 12;
359 wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
360 }
361
362 reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
363 reg |= 1 << channel | WM8350_AUXADC_POLL;
364 wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
365
366 /* If a late IRQ left the completion signalled then consume
367 * the completion. */
368 try_wait_for_completion(&wm8350->auxadc_done);
369
370 /* We ignore the result of the completion and just check for a
371 * conversion result, allowing us to soldier on if the IRQ
372 * infrastructure is not set up for the chip. */
373 wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));
374
375 reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
376 if (reg & WM8350_AUXADC_POLL)
377 dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
378 else
379 result = wm8350_reg_read(wm8350,
380 WM8350_AUX1_READBACK + channel);
381
382 /* Turn off the ADC */
383 reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
384 wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
385 reg & ~WM8350_AUXADC_ENA);
386
387 mutex_unlock(&wm8350->auxadc_mutex);
388
389 return result & WM8350_AUXADC_DATA1_MASK;
390 }
391 EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
392
393 static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
394 {
395 struct wm8350 *wm8350 = irq_data;
396
397 complete(&wm8350->auxadc_done);
398
399 return IRQ_HANDLED;
400 }
401
402 /*
403 * Cache is always host endian.
404 */
405 static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
406 {
407 int i, ret = 0;
408 u16 value;
409 const u16 *reg_map;
410
411 switch (type) {
412 case 0:
413 switch (mode) {
414 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
415 case 0:
416 reg_map = wm8350_mode0_defaults;
417 break;
418 #endif
419 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
420 case 1:
421 reg_map = wm8350_mode1_defaults;
422 break;
423 #endif
424 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
425 case 2:
426 reg_map = wm8350_mode2_defaults;
427 break;
428 #endif
429 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
430 case 3:
431 reg_map = wm8350_mode3_defaults;
432 break;
433 #endif
434 default:
435 dev_err(wm8350->dev,
436 "WM8350 configuration mode %d not supported\n",
437 mode);
438 return -EINVAL;
439 }
440 break;
441
442 case 1:
443 switch (mode) {
444 #ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
445 case 0:
446 reg_map = wm8351_mode0_defaults;
447 break;
448 #endif
449 #ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
450 case 1:
451 reg_map = wm8351_mode1_defaults;
452 break;
453 #endif
454 #ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
455 case 2:
456 reg_map = wm8351_mode2_defaults;
457 break;
458 #endif
459 #ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
460 case 3:
461 reg_map = wm8351_mode3_defaults;
462 break;
463 #endif
464 default:
465 dev_err(wm8350->dev,
466 "WM8351 configuration mode %d not supported\n",
467 mode);
468 return -EINVAL;
469 }
470 break;
471
472 case 2:
473 switch (mode) {
474 #ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
475 case 0:
476 reg_map = wm8352_mode0_defaults;
477 break;
478 #endif
479 #ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
480 case 1:
481 reg_map = wm8352_mode1_defaults;
482 break;
483 #endif
484 #ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
485 case 2:
486 reg_map = wm8352_mode2_defaults;
487 break;
488 #endif
489 #ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
490 case 3:
491 reg_map = wm8352_mode3_defaults;
492 break;
493 #endif
494 default:
495 dev_err(wm8350->dev,
496 "WM8352 configuration mode %d not supported\n",
497 mode);
498 return -EINVAL;
499 }
500 break;
501
502 default:
503 dev_err(wm8350->dev,
504 "WM835x configuration mode %d not supported\n",
505 mode);
506 return -EINVAL;
507 }
508
509 wm8350->reg_cache =
510 kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
511 if (wm8350->reg_cache == NULL)
512 return -ENOMEM;
513
514 /* Read the initial cache state back from the device - this is
515 * a PMIC so the device many not be in a virgin state and we
516 * can't rely on the silicon values.
517 */
518 ret = wm8350->read_dev(wm8350, 0,
519 sizeof(u16) * (WM8350_MAX_REGISTER + 1),
520 wm8350->reg_cache);
521 if (ret < 0) {
522 dev_err(wm8350->dev,
523 "failed to read initial cache values\n");
524 goto out;
525 }
526
527 /* Mask out uncacheable/unreadable bits and the audio. */
528 for (i = 0; i < WM8350_MAX_REGISTER; i++) {
529 if (wm8350_reg_io_map[i].readable &&
530 (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
531 value = be16_to_cpu(wm8350->reg_cache[i]);
532 value &= wm8350_reg_io_map[i].readable;
533 wm8350->reg_cache[i] = value;
534 } else
535 wm8350->reg_cache[i] = reg_map[i];
536 }
537
538 out:
539 kfree(wm8350->reg_cache);
540 return ret;
541 }
542
543 /*
544 * Register a client device. This is non-fatal since there is no need to
545 * fail the entire device init due to a single platform device failing.
546 */
547 static void wm8350_client_dev_register(struct wm8350 *wm8350,
548 const char *name,
549 struct platform_device **pdev)
550 {
551 int ret;
552
553 *pdev = platform_device_alloc(name, -1);
554 if (*pdev == NULL) {
555 dev_err(wm8350->dev, "Failed to allocate %s\n", name);
556 return;
557 }
558
559 (*pdev)->dev.parent = wm8350->dev;
560 platform_set_drvdata(*pdev, wm8350);
561 ret = platform_device_add(*pdev);
562 if (ret != 0) {
563 dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
564 platform_device_put(*pdev);
565 *pdev = NULL;
566 }
567 }
568
569 int wm8350_device_init(struct wm8350 *wm8350, int irq,
570 struct wm8350_platform_data *pdata)
571 {
572 int ret;
573 u16 id1, id2, mask_rev;
574 u16 cust_id, mode, chip_rev;
575
576 /* get WM8350 revision and config mode */
577 ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
578 if (ret != 0) {
579 dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
580 goto err;
581 }
582
583 ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
584 if (ret != 0) {
585 dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
586 goto err;
587 }
588
589 ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
590 &mask_rev);
591 if (ret != 0) {
592 dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
593 goto err;
594 }
595
596 id1 = be16_to_cpu(id1);
597 id2 = be16_to_cpu(id2);
598 mask_rev = be16_to_cpu(mask_rev);
599
600 if (id1 != 0x6143) {
601 dev_err(wm8350->dev,
602 "Device with ID %x is not a WM8350\n", id1);
603 ret = -ENODEV;
604 goto err;
605 }
606
607 mode = id2 & WM8350_CONF_STS_MASK >> 10;
608 cust_id = id2 & WM8350_CUST_ID_MASK;
609 chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
610 dev_info(wm8350->dev,
611 "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
612 mode, cust_id, mask_rev, chip_rev);
613
614 if (cust_id != 0) {
615 dev_err(wm8350->dev, "Unsupported CUST_ID\n");
616 ret = -ENODEV;
617 goto err;
618 }
619
620 switch (mask_rev) {
621 case 0:
622 wm8350->pmic.max_dcdc = WM8350_DCDC_6;
623 wm8350->pmic.max_isink = WM8350_ISINK_B;
624
625 switch (chip_rev) {
626 case WM8350_REV_E:
627 dev_info(wm8350->dev, "WM8350 Rev E\n");
628 break;
629 case WM8350_REV_F:
630 dev_info(wm8350->dev, "WM8350 Rev F\n");
631 break;
632 case WM8350_REV_G:
633 dev_info(wm8350->dev, "WM8350 Rev G\n");
634 wm8350->power.rev_g_coeff = 1;
635 break;
636 case WM8350_REV_H:
637 dev_info(wm8350->dev, "WM8350 Rev H\n");
638 wm8350->power.rev_g_coeff = 1;
639 break;
640 default:
641 /* For safety we refuse to run on unknown hardware */
642 dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
643 ret = -ENODEV;
644 goto err;
645 }
646 break;
647
648 case 1:
649 wm8350->pmic.max_dcdc = WM8350_DCDC_4;
650 wm8350->pmic.max_isink = WM8350_ISINK_A;
651
652 switch (chip_rev) {
653 case 0:
654 dev_info(wm8350->dev, "WM8351 Rev A\n");
655 wm8350->power.rev_g_coeff = 1;
656 break;
657
658 case 1:
659 dev_info(wm8350->dev, "WM8351 Rev B\n");
660 wm8350->power.rev_g_coeff = 1;
661 break;
662
663 default:
664 dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
665 ret = -ENODEV;
666 goto err;
667 }
668 break;
669
670 case 2:
671 wm8350->pmic.max_dcdc = WM8350_DCDC_6;
672 wm8350->pmic.max_isink = WM8350_ISINK_B;
673
674 switch (chip_rev) {
675 case 0:
676 dev_info(wm8350->dev, "WM8352 Rev A\n");
677 wm8350->power.rev_g_coeff = 1;
678 break;
679
680 default:
681 dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
682 ret = -ENODEV;
683 goto err;
684 }
685 break;
686
687 default:
688 dev_err(wm8350->dev, "Unknown MASK_REV\n");
689 ret = -ENODEV;
690 goto err;
691 }
692
693 ret = wm8350_create_cache(wm8350, mask_rev, mode);
694 if (ret < 0) {
695 dev_err(wm8350->dev, "Failed to create register cache\n");
696 return ret;
697 }
698
699 mutex_init(&wm8350->auxadc_mutex);
700 init_completion(&wm8350->auxadc_done);
701
702 ret = wm8350_irq_init(wm8350, irq, pdata);
703 if (ret < 0)
704 goto err_free;
705
706 if (wm8350->irq_base) {
707 ret = request_threaded_irq(wm8350->irq_base +
708 WM8350_IRQ_AUXADC_DATARDY,
709 NULL, wm8350_auxadc_irq, 0,
710 "auxadc", wm8350);
711 if (ret < 0)
712 dev_warn(wm8350->dev,
713 "Failed to request AUXADC IRQ: %d\n", ret);
714 }
715
716 if (pdata && pdata->init) {
717 ret = pdata->init(wm8350);
718 if (ret != 0) {
719 dev_err(wm8350->dev, "Platform init() failed: %d\n",
720 ret);
721 goto err_irq;
722 }
723 }
724
725 wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
726
727 wm8350_client_dev_register(wm8350, "wm8350-codec",
728 &(wm8350->codec.pdev));
729 wm8350_client_dev_register(wm8350, "wm8350-gpio",
730 &(wm8350->gpio.pdev));
731 wm8350_client_dev_register(wm8350, "wm8350-hwmon",
732 &(wm8350->hwmon.pdev));
733 wm8350_client_dev_register(wm8350, "wm8350-power",
734 &(wm8350->power.pdev));
735 wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
736 wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
737
738 return 0;
739
740 err_irq:
741 wm8350_irq_exit(wm8350);
742 err_free:
743 kfree(wm8350->reg_cache);
744 err:
745 return ret;
746 }
747 EXPORT_SYMBOL_GPL(wm8350_device_init);
748
749 void wm8350_device_exit(struct wm8350 *wm8350)
750 {
751 int i;
752
753 for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
754 platform_device_unregister(wm8350->pmic.led[i].pdev);
755
756 for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
757 platform_device_unregister(wm8350->pmic.pdev[i]);
758
759 platform_device_unregister(wm8350->wdt.pdev);
760 platform_device_unregister(wm8350->rtc.pdev);
761 platform_device_unregister(wm8350->power.pdev);
762 platform_device_unregister(wm8350->hwmon.pdev);
763 platform_device_unregister(wm8350->gpio.pdev);
764 platform_device_unregister(wm8350->codec.pdev);
765
766 if (wm8350->irq_base)
767 free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
768
769 wm8350_irq_exit(wm8350);
770
771 kfree(wm8350->reg_cache);
772 }
773 EXPORT_SYMBOL_GPL(wm8350_device_exit);
774
775 MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
776 MODULE_LICENSE("GPL");
linux-next