?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / mmc / host / tmio_mmc_pio.c
blob1f16357e7301d1f4ea9a61f994f094bc71e0785b
1 /*
2 * linux/drivers/mmc/host/tmio_mmc_pio.c
3 *
4 * Copyright (C) 2011 Guennadi Liakhovetski
5 * Copyright (C) 2007 Ian Molton
6 * Copyright (C) 2004 Ian Molton
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * Driver for the MMC / SD / SDIO IP found in:
13 *
14 * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs
15 *
16 * This driver draws mainly on scattered spec sheets, Reverse engineering
17 * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit
18 * support). (Further 4 bit support from a later datasheet).
19 *
20 * TODO:
21 * Investigate using a workqueue for PIO transfers
22 * Eliminate FIXMEs
23 * SDIO support
24 * Better Power management
25 * Handle MMC errors better
26 * double buffer support
27 *
28 */
29
30 #include <linux/delay.h>
31 #include <linux/device.h>
32 #include <linux/highmem.h>
33 #include <linux/interrupt.h>
34 #include <linux/io.h>
35 #include <linux/irq.h>
36 #include <linux/mfd/tmio.h>
37 #include <linux/mmc/host.h>
38 #include <linux/mmc/tmio.h>
39 #include <linux/module.h>
40 #include <linux/pagemap.h>
41 #include <linux/platform_device.h>
42 #include <linux/pm_runtime.h>
43 #include <linux/scatterlist.h>
44 #include <linux/workqueue.h>
45 #include <linux/spinlock.h>
46
47 #include "tmio_mmc.h"
48
49 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
50 {
51 u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ);
52 sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
53 }
54
55 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i)
56 {
57 u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ);
58 sd_ctrl_write32(host, CTL_IRQ_MASK, mask);
59 }
60
61 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i)
62 {
63 sd_ctrl_write32(host, CTL_STATUS, ~i);
64 }
65
66 static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data)
67 {
68 host->sg_len = data->sg_len;
69 host->sg_ptr = data->sg;
70 host->sg_orig = data->sg;
71 host->sg_off = 0;
72 }
73
74 static int tmio_mmc_next_sg(struct tmio_mmc_host *host)
75 {
76 host->sg_ptr = sg_next(host->sg_ptr);
77 host->sg_off = 0;
78 return --host->sg_len;
79 }
80
81 #ifdef CONFIG_MMC_DEBUG
82
83 #define STATUS_TO_TEXT(a, status, i) \
84 do { \
85 if (status & TMIO_STAT_##a) { \
86 if (i++) \
87 printk(" | "); \
88 printk(#a); \
89 } \
90 } while (0)
91
92 static void pr_debug_status(u32 status)
93 {
94 int i = 0;
95 printk(KERN_DEBUG "status: %08x = ", status);
96 STATUS_TO_TEXT(CARD_REMOVE, status, i);
97 STATUS_TO_TEXT(CARD_INSERT, status, i);
98 STATUS_TO_TEXT(SIGSTATE, status, i);
99 STATUS_TO_TEXT(WRPROTECT, status, i);
100 STATUS_TO_TEXT(CARD_REMOVE_A, status, i);
101 STATUS_TO_TEXT(CARD_INSERT_A, status, i);
102 STATUS_TO_TEXT(SIGSTATE_A, status, i);
103 STATUS_TO_TEXT(CMD_IDX_ERR, status, i);
104 STATUS_TO_TEXT(STOPBIT_ERR, status, i);
105 STATUS_TO_TEXT(ILL_FUNC, status, i);
106 STATUS_TO_TEXT(CMD_BUSY, status, i);
107 STATUS_TO_TEXT(CMDRESPEND, status, i);
108 STATUS_TO_TEXT(DATAEND, status, i);
109 STATUS_TO_TEXT(CRCFAIL, status, i);
110 STATUS_TO_TEXT(DATATIMEOUT, status, i);
111 STATUS_TO_TEXT(CMDTIMEOUT, status, i);
112 STATUS_TO_TEXT(RXOVERFLOW, status, i);
113 STATUS_TO_TEXT(TXUNDERRUN, status, i);
114 STATUS_TO_TEXT(RXRDY, status, i);
115 STATUS_TO_TEXT(TXRQ, status, i);
116 STATUS_TO_TEXT(ILL_ACCESS, status, i);
117 printk("\n");
118 }
119
120 #else
121 #define pr_debug_status(s) do { } while (0)
122 #endif
123
124 static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
125 {
126 struct tmio_mmc_host *host = mmc_priv(mmc);
127
128 if (enable) {
129 host->sdio_irq_enabled = 1;
130 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
131 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK,
132 (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ));
133 } else {
134 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL);
135 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000);
136 host->sdio_irq_enabled = 0;
137 }
138 }
139
140 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
141 {
142 u32 clk = 0, clock;
143
144 if (new_clock) {
145 for (clock = host->mmc->f_min, clk = 0x80000080;
146 new_clock >= (clock<<1); clk >>= 1)
147 clock <<= 1;
148 clk |= 0x100;
149 }
150
151 if (host->set_clk_div)
152 host->set_clk_div(host->pdev, (clk>>22) & 1);
153
154 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
155 }
156
157 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
158 {
159 struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
160
161 /* implicit BUG_ON(!res) */
162 if (resource_size(res) > 0x100) {
163 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
164 msleep(10);
165 }
166
167 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
168 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
169 msleep(10);
170 }
171
172 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
173 {
174 struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
175
176 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
177 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
178 msleep(10);
179
180 /* implicit BUG_ON(!res) */
181 if (resource_size(res) > 0x100) {
182 sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
183 msleep(10);
184 }
185 }
186
187 static void tmio_mmc_reset(struct tmio_mmc_host *host)
188 {
189 struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
190
191 /* FIXME - should we set stop clock reg here */
192 sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
193 /* implicit BUG_ON(!res) */
194 if (resource_size(res) > 0x100)
195 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
196 msleep(10);
197 sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
198 if (resource_size(res) > 0x100)
199 sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
200 msleep(10);
201 }
202
203 static void tmio_mmc_reset_work(struct work_struct *work)
204 {
205 struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
206 delayed_reset_work.work);
207 struct mmc_request *mrq;
208 unsigned long flags;
209
210 spin_lock_irqsave(&host->lock, flags);
211 mrq = host->mrq;
212
213 /*
214 * is request already finished? Since we use a non-blocking
215 * cancel_delayed_work(), it can happen, that a .set_ios() call preempts
216 * us, so, have to check for IS_ERR(host->mrq)
217 */
218 if (IS_ERR_OR_NULL(mrq)
219 || time_is_after_jiffies(host->last_req_ts +
220 msecs_to_jiffies(2000))) {
221 spin_unlock_irqrestore(&host->lock, flags);
222 return;
223 }
224
225 dev_warn(&host->pdev->dev,
226 "timeout waiting for hardware interrupt (CMD%u)\n",
227 mrq->cmd->opcode);
228
229 if (host->data)
230 host->data->error = -ETIMEDOUT;
231 else if (host->cmd)
232 host->cmd->error = -ETIMEDOUT;
233 else
234 mrq->cmd->error = -ETIMEDOUT;
235
236 host->cmd = NULL;
237 host->data = NULL;
238 host->force_pio = false;
239
240 spin_unlock_irqrestore(&host->lock, flags);
241
242 tmio_mmc_reset(host);
243
244 /* Ready for new calls */
245 host->mrq = NULL;
246
247 mmc_request_done(host->mmc, mrq);
248 }
249
250 /* called with host->lock held, interrupts disabled */
251 static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
252 {
253 struct mmc_request *mrq;
254 unsigned long flags;
255
256 spin_lock_irqsave(&host->lock, flags);
257
258 mrq = host->mrq;
259 if (IS_ERR_OR_NULL(mrq)) {
260 spin_unlock_irqrestore(&host->lock, flags);
261 return;
262 }
263
264 host->cmd = NULL;
265 host->data = NULL;
266 host->force_pio = false;
267
268 cancel_delayed_work(&host->delayed_reset_work);
269
270 host->mrq = NULL;
271 spin_unlock_irqrestore(&host->lock, flags);
272
273 mmc_request_done(host->mmc, mrq);
274 }
275
276 static void tmio_mmc_done_work(struct work_struct *work)
277 {
278 struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
279 done);
280 tmio_mmc_finish_request(host);
281 }
282
283 /* These are the bitmasks the tmio chip requires to implement the MMC response
284 * types. Note that R1 and R6 are the same in this scheme. */
285 #define APP_CMD 0x0040
286 #define RESP_NONE 0x0300
287 #define RESP_R1 0x0400
288 #define RESP_R1B 0x0500
289 #define RESP_R2 0x0600
290 #define RESP_R3 0x0700
291 #define DATA_PRESENT 0x0800
292 #define TRANSFER_READ 0x1000
293 #define TRANSFER_MULTI 0x2000
294 #define SECURITY_CMD 0x4000
295
296 static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
297 {
298 struct mmc_data *data = host->data;
299 int c = cmd->opcode;
300
301 /* Command 12 is handled by hardware */
302 if (cmd->opcode == 12 && !cmd->arg) {
303 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
304 return 0;
305 }
306
307 switch (mmc_resp_type(cmd)) {
308 case MMC_RSP_NONE: c |= RESP_NONE; break;
309 case MMC_RSP_R1: c |= RESP_R1; break;
310 case MMC_RSP_R1B: c |= RESP_R1B; break;
311 case MMC_RSP_R2: c |= RESP_R2; break;
312 case MMC_RSP_R3: c |= RESP_R3; break;
313 default:
314 pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
315 return -EINVAL;
316 }
317
318 host->cmd = cmd;
319
320 /* FIXME - this seems to be ok commented out but the spec suggest this bit
321 * should be set when issuing app commands.
322 * if(cmd->flags & MMC_FLAG_ACMD)
323 * c |= APP_CMD;
324 */
325 if (data) {
326 c |= DATA_PRESENT;
327 if (data->blocks > 1) {
328 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
329 c |= TRANSFER_MULTI;
330 }
331 if (data->flags & MMC_DATA_READ)
332 c |= TRANSFER_READ;
333 }
334
335 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD);
336
337 /* Fire off the command */
338 sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
339 sd_ctrl_write16(host, CTL_SD_CMD, c);
340
341 return 0;
342 }
343
344 /*
345 * This chip always returns (at least?) as much data as you ask for.
346 * I'm unsure what happens if you ask for less than a block. This should be
347 * looked into to ensure that a funny length read doesn't hose the controller.
348 */
349 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
350 {
351 struct mmc_data *data = host->data;
352 void *sg_virt;
353 unsigned short *buf;
354 unsigned int count;
355 unsigned long flags;
356
357 if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
358 pr_err("PIO IRQ in DMA mode!\n");
359 return;
360 } else if (!data) {
361 pr_debug("Spurious PIO IRQ\n");
362 return;
363 }
364
365 sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
366 buf = (unsigned short *)(sg_virt + host->sg_off);
367
368 count = host->sg_ptr->length - host->sg_off;
369 if (count > data->blksz)
370 count = data->blksz;
371
372 pr_debug("count: %08x offset: %08x flags %08x\n",
373 count, host->sg_off, data->flags);
374
375 /* Transfer the data */
376 if (data->flags & MMC_DATA_READ)
377 sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
378 else
379 sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
380
381 host->sg_off += count;
382
383 tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt);
384
385 if (host->sg_off == host->sg_ptr->length)
386 tmio_mmc_next_sg(host);
387
388 return;
389 }
390
391 static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host)
392 {
393 if (host->sg_ptr == &host->bounce_sg) {
394 unsigned long flags;
395 void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags);
396 memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length);
397 tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr);
398 }
399 }
400
401 /* needs to be called with host->lock held */
402 void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
403 {
404 struct mmc_data *data = host->data;
405 struct mmc_command *stop;
406
407 host->data = NULL;
408
409 if (!data) {
410 dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
411 return;
412 }
413 stop = data->stop;
414
415 /* FIXME - return correct transfer count on errors */
416 if (!data->error)
417 data->bytes_xfered = data->blocks * data->blksz;
418 else
419 data->bytes_xfered = 0;
420
421 pr_debug("Completed data request\n");
422
423 /*
424 * FIXME: other drivers allow an optional stop command of any given type
425 * which we dont do, as the chip can auto generate them.
426 * Perhaps we can be smarter about when to use auto CMD12 and
427 * only issue the auto request when we know this is the desired
428 * stop command, allowing fallback to the stop command the
429 * upper layers expect. For now, we do what works.
430 */
431
432 if (data->flags & MMC_DATA_READ) {
433 if (host->chan_rx && !host->force_pio)
434 tmio_mmc_check_bounce_buffer(host);
435 dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
436 host->mrq);
437 } else {
438 dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
439 host->mrq);
440 }
441
442 if (stop) {
443 if (stop->opcode == 12 && !stop->arg)
444 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
445 else
446 BUG();
447 }
448
449 schedule_work(&host->done);
450 }
451
452 static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
453 {
454 struct mmc_data *data;
455 spin_lock(&host->lock);
456 data = host->data;
457
458 if (!data)
459 goto out;
460
461 if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
462 /*
463 * Has all data been written out yet? Testing on SuperH showed,
464 * that in most cases the first interrupt comes already with the
465 * BUSY status bit clear, but on some operations, like mount or
466 * in the beginning of a write / sync / umount, there is one
467 * DATAEND interrupt with the BUSY bit set, in this cases
468 * waiting for one more interrupt fixes the problem.
469 */
470 if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
471 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
472 tasklet_schedule(&host->dma_complete);
473 }
474 } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
475 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
476 tasklet_schedule(&host->dma_complete);
477 } else {
478 tmio_mmc_do_data_irq(host);
479 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP);
480 }
481 out:
482 spin_unlock(&host->lock);
483 }
484
485 static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
486 unsigned int stat)
487 {
488 struct mmc_command *cmd = host->cmd;
489 int i, addr;
490
491 spin_lock(&host->lock);
492
493 if (!host->cmd) {
494 pr_debug("Spurious CMD irq\n");
495 goto out;
496 }
497
498 host->cmd = NULL;
499
500 /* This controller is sicker than the PXA one. Not only do we need to
501 * drop the top 8 bits of the first response word, we also need to
502 * modify the order of the response for short response command types.
503 */
504
505 for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
506 cmd->resp[i] = sd_ctrl_read32(host, addr);
507
508 if (cmd->flags & MMC_RSP_136) {
509 cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
510 cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
511 cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
512 cmd->resp[3] <<= 8;
513 } else if (cmd->flags & MMC_RSP_R3) {
514 cmd->resp[0] = cmd->resp[3];
515 }
516
517 if (stat & TMIO_STAT_CMDTIMEOUT)
518 cmd->error = -ETIMEDOUT;
519 else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
520 cmd->error = -EILSEQ;
521
522 /* If there is data to handle we enable data IRQs here, and
523 * we will ultimatley finish the request in the data_end handler.
524 * If theres no data or we encountered an error, finish now.
525 */
526 if (host->data && !cmd->error) {
527 if (host->data->flags & MMC_DATA_READ) {
528 if (host->force_pio || !host->chan_rx)
529 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
530 else
531 tasklet_schedule(&host->dma_issue);
532 } else {
533 if (host->force_pio || !host->chan_tx)
534 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
535 else
536 tasklet_schedule(&host->dma_issue);
537 }
538 } else {
539 schedule_work(&host->done);
540 }
541
542 out:
543 spin_unlock(&host->lock);
544 }
545
546 irqreturn_t tmio_mmc_irq(int irq, void *devid)
547 {
548 struct tmio_mmc_host *host = devid;
549 struct mmc_host *mmc = host->mmc;
550 struct tmio_mmc_data *pdata = host->pdata;
551 unsigned int ireg, irq_mask, status;
552 unsigned int sdio_ireg, sdio_irq_mask, sdio_status;
553
554 pr_debug("MMC IRQ begin\n");
555
556 status = sd_ctrl_read32(host, CTL_STATUS);
557 irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
558 ireg = status & TMIO_MASK_IRQ & ~irq_mask;
559
560 sdio_ireg = 0;
561 if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) {
562 sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS);
563 sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK);
564 sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask;
565
566 sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL);
567
568 if (sdio_ireg && !host->sdio_irq_enabled) {
569 pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n",
570 sdio_status, sdio_irq_mask, sdio_ireg);
571 tmio_mmc_enable_sdio_irq(mmc, 0);
572 goto out;
573 }
574
575 if (mmc->caps & MMC_CAP_SDIO_IRQ &&
576 sdio_ireg & TMIO_SDIO_STAT_IOIRQ)
577 mmc_signal_sdio_irq(mmc);
578
579 if (sdio_ireg)
580 goto out;
581 }
582
583 pr_debug_status(status);
584 pr_debug_status(ireg);
585
586 /* Card insert / remove attempts */
587 if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
588 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
589 TMIO_STAT_CARD_REMOVE);
590 if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) ||
591 ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) &&
592 !work_pending(&mmc->detect.work))
593 mmc_detect_change(host->mmc, msecs_to_jiffies(100));
594 goto out;
595 }
596
597 /* CRC and other errors */
598 /* if (ireg & TMIO_STAT_ERR_IRQ)
599 * handled |= tmio_error_irq(host, irq, stat);
600 */
601
602 /* Command completion */
603 if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) {
604 tmio_mmc_ack_mmc_irqs(host,
605 TMIO_STAT_CMDRESPEND |
606 TMIO_STAT_CMDTIMEOUT);
607 tmio_mmc_cmd_irq(host, status);
608 goto out;
609 }
610
611 /* Data transfer */
612 if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
613 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
614 tmio_mmc_pio_irq(host);
615 goto out;
616 }
617
618 /* Data transfer completion */
619 if (ireg & TMIO_STAT_DATAEND) {
620 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
621 tmio_mmc_data_irq(host);
622 goto out;
623 }
624
625 pr_warning("tmio_mmc: Spurious irq, disabling! "
626 "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
627 pr_debug_status(status);
628 tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask);
629
630 out:
631 return IRQ_HANDLED;
632 }
633 EXPORT_SYMBOL(tmio_mmc_irq);
634
635 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
636 struct mmc_data *data)
637 {
638 struct tmio_mmc_data *pdata = host->pdata;
639
640 pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
641 data->blksz, data->blocks);
642
643 /* Some hardware cannot perform 2 byte requests in 4 bit mode */
644 if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
645 int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
646
647 if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
648 pr_err("%s: %d byte block unsupported in 4 bit mode\n",
649 mmc_hostname(host->mmc), data->blksz);
650 return -EINVAL;
651 }
652 }
653
654 tmio_mmc_init_sg(host, data);
655 host->data = data;
656
657 /* Set transfer length / blocksize */
658 sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
659 sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
660
661 tmio_mmc_start_dma(host, data);
662
663 return 0;
664 }
665
666 /* Process requests from the MMC layer */
667 static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
668 {
669 struct tmio_mmc_host *host = mmc_priv(mmc);
670 unsigned long flags;
671 int ret;
672
673 spin_lock_irqsave(&host->lock, flags);
674
675 if (host->mrq) {
676 pr_debug("request not null\n");
677 if (IS_ERR(host->mrq)) {
678 spin_unlock_irqrestore(&host->lock, flags);
679 mrq->cmd->error = -EAGAIN;
680 mmc_request_done(mmc, mrq);
681 return;
682 }
683 }
684
685 host->last_req_ts = jiffies;
686 wmb();
687 host->mrq = mrq;
688
689 spin_unlock_irqrestore(&host->lock, flags);
690
691 if (mrq->data) {
692 ret = tmio_mmc_start_data(host, mrq->data);
693 if (ret)
694 goto fail;
695 }
696
697 ret = tmio_mmc_start_command(host, mrq->cmd);
698 if (!ret) {
699 schedule_delayed_work(&host->delayed_reset_work,
700 msecs_to_jiffies(2000));
701 return;
702 }
703
704 fail:
705 host->force_pio = false;
706 host->mrq = NULL;
707 mrq->cmd->error = ret;
708 mmc_request_done(mmc, mrq);
709 }
710
711 /* Set MMC clock / power.
712 * Note: This controller uses a simple divider scheme therefore it cannot
713 * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
714 * MMC wont run that fast, it has to be clocked at 12MHz which is the next
715 * slowest setting.
716 */
717 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
718 {
719 struct tmio_mmc_host *host = mmc_priv(mmc);
720 struct tmio_mmc_data *pdata = host->pdata;
721 unsigned long flags;
722
723 mutex_lock(&host->ios_lock);
724
725 spin_lock_irqsave(&host->lock, flags);
726 if (host->mrq) {
727 if (IS_ERR(host->mrq)) {
728 dev_dbg(&host->pdev->dev,
729 "%s.%d: concurrent .set_ios(), clk %u, mode %u\n",
730 current->comm, task_pid_nr(current),
731 ios->clock, ios->power_mode);
732 host->mrq = ERR_PTR(-EINTR);
733 } else {
734 dev_dbg(&host->pdev->dev,
735 "%s.%d: CMD%u active since %lu, now %lu!\n",
736 current->comm, task_pid_nr(current),
737 host->mrq->cmd->opcode, host->last_req_ts, jiffies);
738 }
739 spin_unlock_irqrestore(&host->lock, flags);
740
741 mutex_unlock(&host->ios_lock);
742 return;
743 }
744
745 host->mrq = ERR_PTR(-EBUSY);
746
747 spin_unlock_irqrestore(&host->lock, flags);
748
749 /*
750 * pdata->power == false only if COLD_CD is available, otherwise only
751 * in short time intervals during probing or resuming
752 */
753 if (ios->power_mode == MMC_POWER_ON && ios->clock) {
754 if (!pdata->power) {
755 pm_runtime_get_sync(&host->pdev->dev);
756 pdata->power = true;
757 }
758 tmio_mmc_set_clock(host, ios->clock);
759 /* power up SD bus */
760 if (host->set_pwr)
761 host->set_pwr(host->pdev, 1);
762 /* start bus clock */
763 tmio_mmc_clk_start(host);
764 } else if (ios->power_mode != MMC_POWER_UP) {
765 if (host->set_pwr)
766 host->set_pwr(host->pdev, 0);
767 if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) &&
768 pdata->power) {
769 pdata->power = false;
770 pm_runtime_put(&host->pdev->dev);
771 }
772 tmio_mmc_clk_stop(host);
773 }
774
775 switch (ios->bus_width) {
776 case MMC_BUS_WIDTH_1:
777 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
778 break;
779 case MMC_BUS_WIDTH_4:
780 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
781 break;
782 }
783
784 /* Let things settle. delay taken from winCE driver */
785 udelay(140);
786 if (PTR_ERR(host->mrq) == -EINTR)
787 dev_dbg(&host->pdev->dev,
788 "%s.%d: IOS interrupted: clk %u, mode %u",
789 current->comm, task_pid_nr(current),
790 ios->clock, ios->power_mode);
791 host->mrq = NULL;
792
793 mutex_unlock(&host->ios_lock);
794 }
795
796 static int tmio_mmc_get_ro(struct mmc_host *mmc)
797 {
798 struct tmio_mmc_host *host = mmc_priv(mmc);
799 struct tmio_mmc_data *pdata = host->pdata;
800
801 return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
802 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
803 }
804
805 static int tmio_mmc_get_cd(struct mmc_host *mmc)
806 {
807 struct tmio_mmc_host *host = mmc_priv(mmc);
808 struct tmio_mmc_data *pdata = host->pdata;
809
810 if (!pdata->get_cd)
811 return -ENOSYS;
812 else
813 return pdata->get_cd(host->pdev);
814 }
815
816 static const struct mmc_host_ops tmio_mmc_ops = {
817 .request = tmio_mmc_request,
818 .set_ios = tmio_mmc_set_ios,
819 .get_ro = tmio_mmc_get_ro,
820 .get_cd = tmio_mmc_get_cd,
821 .enable_sdio_irq = tmio_mmc_enable_sdio_irq,
822 };
823
824 int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
825 struct platform_device *pdev,
826 struct tmio_mmc_data *pdata)
827 {
828 struct tmio_mmc_host *_host;
829 struct mmc_host *mmc;
830 struct resource *res_ctl;
831 int ret;
832 u32 irq_mask = TMIO_MASK_CMD;
833
834 res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0);
835 if (!res_ctl)
836 return -EINVAL;
837
838 mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev);
839 if (!mmc)
840 return -ENOMEM;
841
842 pdata->dev = &pdev->dev;
843 _host = mmc_priv(mmc);
844 _host->pdata = pdata;
845 _host->mmc = mmc;
846 _host->pdev = pdev;
847 platform_set_drvdata(pdev, mmc);
848
849 _host->set_pwr = pdata->set_pwr;
850 _host->set_clk_div = pdata->set_clk_div;
851
852 /* SD control register space size is 0x200, 0x400 for bus_shift=1 */
853 _host->bus_shift = resource_size(res_ctl) >> 10;
854
855 _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
856 if (!_host->ctl) {
857 ret = -ENOMEM;
858 goto host_free;
859 }
860
861 mmc->ops = &tmio_mmc_ops;
862 mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
863 mmc->f_max = pdata->hclk;
864 mmc->f_min = mmc->f_max / 512;
865 mmc->max_segs = 32;
866 mmc->max_blk_size = 512;
867 mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
868 mmc->max_segs;
869 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
870 mmc->max_seg_size = mmc->max_req_size;
871 if (pdata->ocr_mask)
872 mmc->ocr_avail = pdata->ocr_mask;
873 else
874 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
875
876 pdata->power = false;
877 pm_runtime_enable(&pdev->dev);
878 ret = pm_runtime_resume(&pdev->dev);
879 if (ret < 0)
880 goto pm_disable;
881
882 tmio_mmc_clk_stop(_host);
883 tmio_mmc_reset(_host);
884
885 tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
886 if (pdata->flags & TMIO_MMC_SDIO_IRQ)
887 tmio_mmc_enable_sdio_irq(mmc, 0);
888
889 spin_lock_init(&_host->lock);
890 mutex_init(&_host->ios_lock);
891
892 /* Init delayed work for request timeouts */
893 INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work);
894 INIT_WORK(&_host->done, tmio_mmc_done_work);
895
896 /* See if we also get DMA */
897 tmio_mmc_request_dma(_host, pdata);
898
899 /* We have to keep the device powered for its card detection to work */
900 if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD)) {
901 pdata->power = true;
902 pm_runtime_get_noresume(&pdev->dev);
903 }
904
905 mmc_add_host(mmc);
906
907 /* Unmask the IRQs we want to know about */
908 if (!_host->chan_rx)
909 irq_mask |= TMIO_MASK_READOP;
910 if (!_host->chan_tx)
911 irq_mask |= TMIO_MASK_WRITEOP;
912
913 tmio_mmc_enable_mmc_irqs(_host, irq_mask);
914
915 *host = _host;
916
917 return 0;
918
919 pm_disable:
920 pm_runtime_disable(&pdev->dev);
921 iounmap(_host->ctl);
922 host_free:
923 mmc_free_host(mmc);
924
925 return ret;
926 }
927 EXPORT_SYMBOL(tmio_mmc_host_probe);
928
929 void tmio_mmc_host_remove(struct tmio_mmc_host *host)
930 {
931 struct platform_device *pdev = host->pdev;
932
933 /*
934 * We don't have to manipulate pdata->power here: if there is a card in
935 * the slot, the runtime PM is active and our .runtime_resume() will not
936 * be run. If there is no card in the slot and the platform can suspend
937 * the controller, the runtime PM is suspended and pdata->power == false,
938 * so, our .runtime_resume() will not try to detect a card in the slot.
939 */
940 if (host->pdata->flags & TMIO_MMC_HAS_COLD_CD)
941 pm_runtime_get_sync(&pdev->dev);
942
943 mmc_remove_host(host->mmc);
944 cancel_work_sync(&host->done);
945 cancel_delayed_work_sync(&host->delayed_reset_work);
946 tmio_mmc_release_dma(host);
947
948 pm_runtime_put_sync(&pdev->dev);
949 pm_runtime_disable(&pdev->dev);
950
951 iounmap(host->ctl);
952 mmc_free_host(host->mmc);
953 }
954 EXPORT_SYMBOL(tmio_mmc_host_remove);
955
956 #ifdef CONFIG_PM
957 int tmio_mmc_host_suspend(struct device *dev)
958 {
959 struct mmc_host *mmc = dev_get_drvdata(dev);
960 struct tmio_mmc_host *host = mmc_priv(mmc);
961 int ret = mmc_suspend_host(mmc);
962
963 if (!ret)
964 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
965
966 host->pm_error = pm_runtime_put_sync(dev);
967
968 return ret;
969 }
970 EXPORT_SYMBOL(tmio_mmc_host_suspend);
971
972 int tmio_mmc_host_resume(struct device *dev)
973 {
974 struct mmc_host *mmc = dev_get_drvdata(dev);
975 struct tmio_mmc_host *host = mmc_priv(mmc);
976
977 /* The MMC core will perform the complete set up */
978 host->pdata->power = false;
979
980 host->pm_global = true;
981 if (!host->pm_error)
982 pm_runtime_get_sync(dev);
983
984 if (host->pm_global) {
985 /* Runtime PM resume callback didn't run */
986 tmio_mmc_reset(host);
987 tmio_mmc_enable_dma(host, true);
988 host->pm_global = false;
989 }
990
991 return mmc_resume_host(mmc);
992 }
993 EXPORT_SYMBOL(tmio_mmc_host_resume);
994
995 #endif /* CONFIG_PM */
996
997 int tmio_mmc_host_runtime_suspend(struct device *dev)
998 {
999 return 0;
1000 }
1001 EXPORT_SYMBOL(tmio_mmc_host_runtime_suspend);
1002
1003 int tmio_mmc_host_runtime_resume(struct device *dev)
1004 {
1005 struct mmc_host *mmc = dev_get_drvdata(dev);
1006 struct tmio_mmc_host *host = mmc_priv(mmc);
1007 struct tmio_mmc_data *pdata = host->pdata;
1008
1009 tmio_mmc_reset(host);
1010 tmio_mmc_enable_dma(host, true);
1011
1012 if (pdata->power) {
1013 /* Only entered after a card-insert interrupt */
1014 if (!mmc->card)
1015 tmio_mmc_set_ios(mmc, &mmc->ios);
1016 mmc_detect_change(mmc, msecs_to_jiffies(100));
1017 }
1018 host->pm_global = false;
1019
1020 return 0;
1021 }
1022 EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
1023
1024 MODULE_LICENSE("GPL v2");
linux-next