?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / net / apne.c
blob547737340cbba774c158e613857a58d27d282d7c
1 /*
2 * Amiga Linux/68k 8390 based PCMCIA Ethernet Driver for the Amiga 1200
3 *
4 * (C) Copyright 1997 Alain Malek
5 * (Alain.Malek@cryogen.com)
6 *
7 * ----------------------------------------------------------------------------
8 *
9 * This program is based on
10 *
11 * ne.c: A general non-shared-memory NS8390 ethernet driver for linux
12 * Written 1992-94 by Donald Becker.
13 *
14 * 8390.c: A general NS8390 ethernet driver core for linux.
15 * Written 1992-94 by Donald Becker.
16 *
17 * cnetdevice: A Sana-II ethernet driver for AmigaOS
18 * Written by Bruce Abbott (bhabbott@inhb.co.nz)
19 *
20 * ----------------------------------------------------------------------------
21 *
22 * This file is subject to the terms and conditions of the GNU General Public
23 * License. See the file COPYING in the main directory of the Linux
24 * distribution for more details.
25 *
26 * ----------------------------------------------------------------------------
27 *
28 */
29
30
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/errno.h>
34 #include <linux/pci.h>
35 #include <linux/init.h>
36 #include <linux/delay.h>
37 #include <linux/netdevice.h>
38 #include <linux/etherdevice.h>
39 #include <linux/interrupt.h>
40 #include <linux/jiffies.h>
41
42 #include <asm/system.h>
43 #include <asm/io.h>
44 #include <asm/setup.h>
45 #include <asm/amigaints.h>
46 #include <asm/amigahw.h>
47 #include <asm/amigayle.h>
48 #include <asm/amipcmcia.h>
49
50 #include "8390.h"
51
52 /* ---- No user-serviceable parts below ---- */
53
54 #define DRV_NAME "apne"
55
56 #define NE_BASE (dev->base_addr)
57 #define NE_CMD 0x00
58 #define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */
59 #define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */
60 #define NE_IO_EXTENT 0x20
61
62 #define NE_EN0_ISR 0x07
63 #define NE_EN0_DCFG 0x0e
64
65 #define NE_EN0_RSARLO 0x08
66 #define NE_EN0_RSARHI 0x09
67 #define NE_EN0_RCNTLO 0x0a
68 #define NE_EN0_RXCR 0x0c
69 #define NE_EN0_TXCR 0x0d
70 #define NE_EN0_RCNTHI 0x0b
71 #define NE_EN0_IMR 0x0f
72
73 #define NE1SM_START_PG 0x20 /* First page of TX buffer */
74 #define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */
75 #define NESM_START_PG 0x40 /* First page of TX buffer */
76 #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
77
78
79 struct net_device * __init apne_probe(int unit);
80 static int apne_probe1(struct net_device *dev, int ioaddr);
81
82 static void apne_reset_8390(struct net_device *dev);
83 static void apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
84 int ring_page);
85 static void apne_block_input(struct net_device *dev, int count,
86 struct sk_buff *skb, int ring_offset);
87 static void apne_block_output(struct net_device *dev, const int count,
88 const unsigned char *buf, const int start_page);
89 static irqreturn_t apne_interrupt(int irq, void *dev_id);
90
91 static int init_pcmcia(void);
92
93 /* IO base address used for nic */
94
95 #define IOBASE 0x300
96
97 /*
98 use MANUAL_CONFIG and MANUAL_OFFSET for enabling IO by hand
99 you can find the values to use by looking at the cnet.device
100 config file example (the default values are for the CNET40BC card)
101 */
102
103 /*
104 #define MANUAL_CONFIG 0x20
105 #define MANUAL_OFFSET 0x3f8
106
107 #define MANUAL_HWADDR0 0x00
108 #define MANUAL_HWADDR1 0x12
109 #define MANUAL_HWADDR2 0x34
110 #define MANUAL_HWADDR3 0x56
111 #define MANUAL_HWADDR4 0x78
112 #define MANUAL_HWADDR5 0x9a
113 */
114
115 static const char version[] =
116 "apne.c:v1.1 7/10/98 Alain Malek (Alain.Malek@cryogen.ch)\n";
117
118 static int apne_owned; /* signal if card already owned */
119
120 struct net_device * __init apne_probe(int unit)
121 {
122 struct net_device *dev;
123 #ifndef MANUAL_CONFIG
124 char tuple[8];
125 #endif
126 int err;
127
128 if (!MACH_IS_AMIGA)
129 return ERR_PTR(-ENODEV);
130
131 if (apne_owned)
132 return ERR_PTR(-ENODEV);
133
134 if ( !(AMIGAHW_PRESENT(PCMCIA)) )
135 return ERR_PTR(-ENODEV);
136
137 printk("Looking for PCMCIA ethernet card : ");
138
139 /* check if a card is inserted */
140 if (!(PCMCIA_INSERTED)) {
141 printk("NO PCMCIA card inserted\n");
142 return ERR_PTR(-ENODEV);
143 }
144
145 dev = alloc_ei_netdev();
146 if (!dev)
147 return ERR_PTR(-ENOMEM);
148 if (unit >= 0) {
149 sprintf(dev->name, "eth%d", unit);
150 netdev_boot_setup_check(dev);
151 }
152
153 /* disable pcmcia irq for readtuple */
154 pcmcia_disable_irq();
155
156 #ifndef MANUAL_CONFIG
157 if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) ||
158 (tuple[2] != CISTPL_FUNCID_NETWORK)) {
159 printk("not an ethernet card\n");
160 /* XXX: shouldn't we re-enable irq here? */
161 free_netdev(dev);
162 return ERR_PTR(-ENODEV);
163 }
164 #endif
165
166 printk("ethernet PCMCIA card inserted\n");
167
168 if (!init_pcmcia()) {
169 /* XXX: shouldn't we re-enable irq here? */
170 free_netdev(dev);
171 return ERR_PTR(-ENODEV);
172 }
173
174 if (!request_region(IOBASE, 0x20, DRV_NAME)) {
175 free_netdev(dev);
176 return ERR_PTR(-EBUSY);
177 }
178
179 err = apne_probe1(dev, IOBASE);
180 if (err) {
181 release_region(IOBASE, 0x20);
182 free_netdev(dev);
183 return ERR_PTR(err);
184 }
185 err = register_netdev(dev);
186 if (!err)
187 return dev;
188
189 pcmcia_disable_irq();
190 free_irq(IRQ_AMIGA_PORTS, dev);
191 pcmcia_reset();
192 release_region(IOBASE, 0x20);
193 free_netdev(dev);
194 return ERR_PTR(err);
195 }
196
197 static int __init apne_probe1(struct net_device *dev, int ioaddr)
198 {
199 int i;
200 unsigned char SA_prom[32];
201 int wordlength = 2;
202 const char *name = NULL;
203 int start_page, stop_page;
204 #ifndef MANUAL_HWADDR0
205 int neX000, ctron;
206 #endif
207 static unsigned version_printed;
208
209 if (ei_debug && version_printed++ == 0)
210 printk(version);
211
212 printk("PCMCIA NE*000 ethercard probe");
213
214 /* Reset card. Who knows what dain-bramaged state it was left in. */
215 { unsigned long reset_start_time = jiffies;
216
217 outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
218
219 while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
220 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
221 printk(" not found (no reset ack).\n");
222 return -ENODEV;
223 }
224
225 outb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
226 }
227
228 #ifndef MANUAL_HWADDR0
229
230 /* Read the 16 bytes of station address PROM.
231 We must first initialize registers, similar to NS8390_init(eifdev, 0).
232 We can't reliably read the SAPROM address without this.
233 (I learned the hard way!). */
234 {
235 struct {unsigned long value, offset; } program_seq[] = {
236 {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/
237 {0x48, NE_EN0_DCFG}, /* Set byte-wide (0x48) access. */
238 {0x00, NE_EN0_RCNTLO}, /* Clear the count regs. */
239 {0x00, NE_EN0_RCNTHI},
240 {0x00, NE_EN0_IMR}, /* Mask completion irq. */
241 {0xFF, NE_EN0_ISR},
242 {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
243 {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode. */
244 {32, NE_EN0_RCNTLO},
245 {0x00, NE_EN0_RCNTHI},
246 {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000. */
247 {0x00, NE_EN0_RSARHI},
248 {E8390_RREAD+E8390_START, NE_CMD},
249 };
250 for (i = 0; i < ARRAY_SIZE(program_seq); i++) {
251 outb(program_seq[i].value, ioaddr + program_seq[i].offset);
252 }
253
254 }
255 for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) {
256 SA_prom[i] = inb(ioaddr + NE_DATAPORT);
257 SA_prom[i+1] = inb(ioaddr + NE_DATAPORT);
258 if (SA_prom[i] != SA_prom[i+1])
259 wordlength = 1;
260 }
261
262 /* At this point, wordlength *only* tells us if the SA_prom is doubled
263 up or not because some broken PCI cards don't respect the byte-wide
264 request in program_seq above, and hence don't have doubled up values.
265 These broken cards would otherwise be detected as an ne1000. */
266
267 if (wordlength == 2)
268 for (i = 0; i < 16; i++)
269 SA_prom[i] = SA_prom[i+i];
270
271 if (wordlength == 2) {
272 /* We must set the 8390 for word mode. */
273 outb(0x49, ioaddr + NE_EN0_DCFG);
274 start_page = NESM_START_PG;
275 stop_page = NESM_STOP_PG;
276 } else {
277 start_page = NE1SM_START_PG;
278 stop_page = NE1SM_STOP_PG;
279 }
280
281 neX000 = (SA_prom[14] == 0x57 && SA_prom[15] == 0x57);
282 ctron = (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d);
283
284 /* Set up the rest of the parameters. */
285 if (neX000) {
286 name = (wordlength == 2) ? "NE2000" : "NE1000";
287 } else if (ctron) {
288 name = (wordlength == 2) ? "Ctron-8" : "Ctron-16";
289 start_page = 0x01;
290 stop_page = (wordlength == 2) ? 0x40 : 0x20;
291 } else {
292 printk(" not found.\n");
293 return -ENXIO;
294
295 }
296
297 #else
298 wordlength = 2;
299 /* We must set the 8390 for word mode. */
300 outb(0x49, ioaddr + NE_EN0_DCFG);
301 start_page = NESM_START_PG;
302 stop_page = NESM_STOP_PG;
303
304 SA_prom[0] = MANUAL_HWADDR0;
305 SA_prom[1] = MANUAL_HWADDR1;
306 SA_prom[2] = MANUAL_HWADDR2;
307 SA_prom[3] = MANUAL_HWADDR3;
308 SA_prom[4] = MANUAL_HWADDR4;
309 SA_prom[5] = MANUAL_HWADDR5;
310 name = "NE2000";
311 #endif
312
313 dev->base_addr = ioaddr;
314 dev->irq = IRQ_AMIGA_PORTS;
315 dev->netdev_ops = &ei_netdev_ops;
316
317 /* Install the Interrupt handler */
318 i = request_irq(dev->irq, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
319 if (i) return i;
320
321 for(i = 0; i < ETHER_ADDR_LEN; i++)
322 dev->dev_addr[i] = SA_prom[i];
323
324 printk(" %pM\n", dev->dev_addr);
325
326 printk("%s: %s found.\n", dev->name, name);
327
328 ei_status.name = name;
329 ei_status.tx_start_page = start_page;
330 ei_status.stop_page = stop_page;
331 ei_status.word16 = (wordlength == 2);
332
333 ei_status.rx_start_page = start_page + TX_PAGES;
334
335 ei_status.reset_8390 = &apne_reset_8390;
336 ei_status.block_input = &apne_block_input;
337 ei_status.block_output = &apne_block_output;
338 ei_status.get_8390_hdr = &apne_get_8390_hdr;
339
340 NS8390_init(dev, 0);
341
342 pcmcia_ack_int(pcmcia_get_intreq()); /* ack PCMCIA int req */
343 pcmcia_enable_irq();
344
345 apne_owned = 1;
346
347 return 0;
348 }
349
350 /* Hard reset the card. This used to pause for the same period that a
351 8390 reset command required, but that shouldn't be necessary. */
352 static void
353 apne_reset_8390(struct net_device *dev)
354 {
355 unsigned long reset_start_time = jiffies;
356
357 init_pcmcia();
358
359 if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies);
360
361 outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
362
363 ei_status.txing = 0;
364 ei_status.dmaing = 0;
365
366 /* This check _should_not_ be necessary, omit eventually. */
367 while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
368 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
369 printk("%s: ne_reset_8390() did not complete.\n", dev->name);
370 break;
371 }
372 outb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */
373 }
374
375 /* Grab the 8390 specific header. Similar to the block_input routine, but
376 we don't need to be concerned with ring wrap as the header will be at
377 the start of a page, so we optimize accordingly. */
378
379 static void
380 apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
381 {
382
383 int nic_base = dev->base_addr;
384 int cnt;
385 char *ptrc;
386 short *ptrs;
387
388 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
389 if (ei_status.dmaing) {
390 printk("%s: DMAing conflict in ne_get_8390_hdr "
391 "[DMAstat:%d][irqlock:%d][intr:%d].\n",
392 dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq);
393 return;
394 }
395
396 ei_status.dmaing |= 0x01;
397 outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
398 outb(ENISR_RDC, nic_base + NE_EN0_ISR);
399 outb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
400 outb(0, nic_base + NE_EN0_RCNTHI);
401 outb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
402 outb(ring_page, nic_base + NE_EN0_RSARHI);
403 outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
404
405 if (ei_status.word16) {
406 ptrs = (short*)hdr;
407 for(cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
408 *ptrs++ = inw(NE_BASE + NE_DATAPORT);
409 } else {
410 ptrc = (char*)hdr;
411 for(cnt = 0; cnt < sizeof(struct e8390_pkt_hdr); cnt++)
412 *ptrc++ = inb(NE_BASE + NE_DATAPORT);
413 }
414
415 outb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
416 ei_status.dmaing &= ~0x01;
417
418 le16_to_cpus(&hdr->count);
419 }
420
421 /* Block input and output, similar to the Crynwr packet driver. If you
422 are porting to a new ethercard, look at the packet driver source for hints.
423 The NEx000 doesn't share the on-board packet memory -- you have to put
424 the packet out through the "remote DMA" dataport using outb. */
425
426 static void
427 apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
428 {
429 int nic_base = dev->base_addr;
430 char *buf = skb->data;
431 char *ptrc;
432 short *ptrs;
433 int cnt;
434
435 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
436 if (ei_status.dmaing) {
437 printk("%s: DMAing conflict in ne_block_input "
438 "[DMAstat:%d][irqlock:%d][intr:%d].\n",
439 dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq);
440 return;
441 }
442 ei_status.dmaing |= 0x01;
443 outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
444 outb(ENISR_RDC, nic_base + NE_EN0_ISR);
445 outb(count & 0xff, nic_base + NE_EN0_RCNTLO);
446 outb(count >> 8, nic_base + NE_EN0_RCNTHI);
447 outb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
448 outb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
449 outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
450 if (ei_status.word16) {
451 ptrs = (short*)buf;
452 for (cnt = 0; cnt < (count>>1); cnt++)
453 *ptrs++ = inw(NE_BASE + NE_DATAPORT);
454 if (count & 0x01) {
455 buf[count-1] = inb(NE_BASE + NE_DATAPORT);
456 }
457 } else {
458 ptrc = (char*)buf;
459 for (cnt = 0; cnt < count; cnt++)
460 *ptrc++ = inb(NE_BASE + NE_DATAPORT);
461 }
462
463 outb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
464 ei_status.dmaing &= ~0x01;
465 }
466
467 static void
468 apne_block_output(struct net_device *dev, int count,
469 const unsigned char *buf, const int start_page)
470 {
471 int nic_base = NE_BASE;
472 unsigned long dma_start;
473 char *ptrc;
474 short *ptrs;
475 int cnt;
476
477 /* Round the count up for word writes. Do we need to do this?
478 What effect will an odd byte count have on the 8390?
479 I should check someday. */
480 if (ei_status.word16 && (count & 0x01))
481 count++;
482
483 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
484 if (ei_status.dmaing) {
485 printk("%s: DMAing conflict in ne_block_output."
486 "[DMAstat:%d][irqlock:%d][intr:%d]\n",
487 dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq);
488 return;
489 }
490 ei_status.dmaing |= 0x01;
491 /* We should already be in page 0, but to be safe... */
492 outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
493
494 outb(ENISR_RDC, nic_base + NE_EN0_ISR);
495
496 /* Now the normal output. */
497 outb(count & 0xff, nic_base + NE_EN0_RCNTLO);
498 outb(count >> 8, nic_base + NE_EN0_RCNTHI);
499 outb(0x00, nic_base + NE_EN0_RSARLO);
500 outb(start_page, nic_base + NE_EN0_RSARHI);
501
502 outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
503 if (ei_status.word16) {
504 ptrs = (short*)buf;
505 for (cnt = 0; cnt < count>>1; cnt++)
506 outw(*ptrs++, NE_BASE+NE_DATAPORT);
507 } else {
508 ptrc = (char*)buf;
509 for (cnt = 0; cnt < count; cnt++)
510 outb(*ptrc++, NE_BASE + NE_DATAPORT);
511 }
512
513 dma_start = jiffies;
514
515 while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
516 if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
517 printk("%s: timeout waiting for Tx RDC.\n", dev->name);
518 apne_reset_8390(dev);
519 NS8390_init(dev,1);
520 break;
521 }
522
523 outb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
524 ei_status.dmaing &= ~0x01;
525 }
526
527 static irqreturn_t apne_interrupt(int irq, void *dev_id)
528 {
529 unsigned char pcmcia_intreq;
530
531 if (!(gayle.inten & GAYLE_IRQ_IRQ))
532 return IRQ_NONE;
533
534 pcmcia_intreq = pcmcia_get_intreq();
535
536 if (!(pcmcia_intreq & GAYLE_IRQ_IRQ)) {
537 pcmcia_ack_int(pcmcia_intreq);
538 return IRQ_NONE;
539 }
540 if (ei_debug > 3)
541 printk("pcmcia intreq = %x\n", pcmcia_intreq);
542 pcmcia_disable_irq(); /* to get rid of the sti() within ei_interrupt */
543 ei_interrupt(irq, dev_id);
544 pcmcia_ack_int(pcmcia_get_intreq());
545 pcmcia_enable_irq();
546 return IRQ_HANDLED;
547 }
548
549 #ifdef MODULE
550 static struct net_device *apne_dev;
551
552 static int __init apne_module_init(void)
553 {
554 apne_dev = apne_probe(-1);
555 if (IS_ERR(apne_dev))
556 return PTR_ERR(apne_dev);
557 return 0;
558 }
559
560 static void __exit apne_module_exit(void)
561 {
562 unregister_netdev(apne_dev);
563
564 pcmcia_disable_irq();
565
566 free_irq(IRQ_AMIGA_PORTS, apne_dev);
567
568 pcmcia_reset();
569
570 release_region(IOBASE, 0x20);
571
572 free_netdev(apne_dev);
573 }
574 module_init(apne_module_init);
575 module_exit(apne_module_exit);
576 #endif
577
578 static int init_pcmcia(void)
579 {
580 u_char config;
581 #ifndef MANUAL_CONFIG
582 u_char tuple[32];
583 int offset_len;
584 #endif
585 u_long offset;
586
587 pcmcia_reset();
588 pcmcia_program_voltage(PCMCIA_0V);
589 pcmcia_access_speed(PCMCIA_SPEED_250NS);
590 pcmcia_write_enable();
591
592 #ifdef MANUAL_CONFIG
593 config = MANUAL_CONFIG;
594 #else
595 /* get and write config byte to enable IO port */
596
597 if (pcmcia_copy_tuple(CISTPL_CFTABLE_ENTRY, tuple, 32) < 3)
598 return 0;
599
600 config = tuple[2] & 0x3f;
601 #endif
602 #ifdef MANUAL_OFFSET
603 offset = MANUAL_OFFSET;
604 #else
605 if (pcmcia_copy_tuple(CISTPL_CONFIG, tuple, 32) < 6)
606 return 0;
607
608 offset_len = (tuple[2] & 0x3) + 1;
609 offset = 0;
610 while(offset_len--) {
611 offset = (offset << 8) | tuple[4+offset_len];
612 }
613 #endif
614
615 out_8(GAYLE_ATTRIBUTE+offset, config);
616
617 return 1;
618 }
619
620 MODULE_LICENSE("GPL");
linux-next