include: replace linux/module.h with "struct module" wherever possible

[linux-2.6/next.git] / drivers / net / atl1c / atl1c_hw.h

/*
 * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 */

#ifndef _ATL1C_HW_H_
#define _ATL1C_HW_H_

#include <linux/types.h>
#include <linux/mii.h>

struct atl1c_adapter;
struct atl1c_hw;

/* function prototype */
void atl1c_phy_disable(struct atl1c_hw *hw);
void atl1c_hw_set_mac_addr(struct atl1c_hw *hw);
int atl1c_phy_reset(struct atl1c_hw *hw);
int atl1c_read_mac_addr(struct atl1c_hw *hw);
int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex);
u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr);
void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value);
int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data);
bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
int atl1c_phy_init(struct atl1c_hw *hw);
int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
int atl1c_restart_autoneg(struct atl1c_hw *hw);
int atl1c_phy_power_saving(struct atl1c_hw *hw);
/* register definition */
#define REG_DEVICE_CAP                  0x5C
#define DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
#define DEVICE_CAP_MAX_PAYLOAD_SHIFT    0

#define REG_DEVICE_CTRL                 0x60
#define DEVICE_CTRL_MAX_PAYLOAD_MASK    0x7
#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT   5
#define DEVICE_CTRL_MAX_RREQ_SZ_MASK    0x7
#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT   12

#define REG_LINK_CTRL                   0x68
#define LINK_CTRL_L0S_EN                0x01
#define LINK_CTRL_L1_EN                 0x02
#define LINK_CTRL_EXT_SYNC              0x80

#define REG_VPD_CAP                     0x6C
#define VPD_CAP_ID_MASK                 0xff
#define VPD_CAP_ID_SHIFT                0
#define VPD_CAP_NEXT_PTR_MASK           0xFF
#define VPD_CAP_NEXT_PTR_SHIFT          8
#define VPD_CAP_VPD_ADDR_MASK           0x7FFF
#define VPD_CAP_VPD_ADDR_SHIFT          16
#define VPD_CAP_VPD_FLAG                0x80000000

#define REG_VPD_DATA                    0x70

#define REG_PCIE_UC_SEVERITY            0x10C
#define PCIE_UC_SERVRITY_TRN            0x00000001
#define PCIE_UC_SERVRITY_DLP            0x00000010
#define PCIE_UC_SERVRITY_PSN_TLP        0x00001000
#define PCIE_UC_SERVRITY_FCP            0x00002000
#define PCIE_UC_SERVRITY_CPL_TO         0x00004000
#define PCIE_UC_SERVRITY_CA             0x00008000
#define PCIE_UC_SERVRITY_UC             0x00010000
#define PCIE_UC_SERVRITY_ROV            0x00020000
#define PCIE_UC_SERVRITY_MLFP           0x00040000
#define PCIE_UC_SERVRITY_ECRC           0x00080000
#define PCIE_UC_SERVRITY_UR             0x00100000

#define REG_DEV_SERIALNUM_CTRL          0x200
#define REG_DEV_MAC_SEL_MASK            0x0 /* 0:EUI; 1:MAC */
#define REG_DEV_MAC_SEL_SHIFT           0
#define REG_DEV_SERIAL_NUM_EN_MASK      0x1
#define REG_DEV_SERIAL_NUM_EN_SHIFT     1

#define REG_TWSI_CTRL                   0x218
#define TWSI_CTRL_LD_OFFSET_MASK        0xFF
#define TWSI_CTRL_LD_OFFSET_SHIFT       0
#define TWSI_CTRL_LD_SLV_ADDR_MASK      0x7
#define TWSI_CTRL_LD_SLV_ADDR_SHIFT     8
#define TWSI_CTRL_SW_LDSTART            0x800
#define TWSI_CTRL_HW_LDSTART            0x1000
#define TWSI_CTRL_SMB_SLV_ADDR_MASK     0x7F
#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT    15
#define TWSI_CTRL_LD_EXIST              0x400000
#define TWSI_CTRL_READ_FREQ_SEL_MASK    0x3
#define TWSI_CTRL_READ_FREQ_SEL_SHIFT   23
#define TWSI_CTRL_FREQ_SEL_100K         0
#define TWSI_CTRL_FREQ_SEL_200K         1
#define TWSI_CTRL_FREQ_SEL_300K         2
#define TWSI_CTRL_FREQ_SEL_400K         3
#define TWSI_CTRL_SMB_SLV_ADDR
#define TWSI_CTRL_WRITE_FREQ_SEL_MASK   0x3
#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT  24


#define REG_PCIE_DEV_MISC_CTRL          0x21C
#define PCIE_DEV_MISC_EXT_PIPE          0x2
#define PCIE_DEV_MISC_RETRY_BUFDIS      0x1
#define PCIE_DEV_MISC_SPIROM_EXIST      0x4
#define PCIE_DEV_MISC_SERDES_ENDIAN     0x8
#define PCIE_DEV_MISC_SERDES_SEL_DIN    0x10

#define REG_PCIE_PHYMISC                0x1000
#define PCIE_PHYMISC_FORCE_RCV_DET      0x4

#define REG_PCIE_PHYMISC2               0x1004
#define PCIE_PHYMISC2_SERDES_CDR_MASK   0x3
#define PCIE_PHYMISC2_SERDES_CDR_SHIFT  16
#define PCIE_PHYMISC2_SERDES_TH_MASK    0x3
#define PCIE_PHYMISC2_SERDES_TH_SHIFT   18

#define REG_TWSI_DEBUG                  0x1108
#define TWSI_DEBUG_DEV_EXIST            0x20000000

#define REG_EEPROM_CTRL                 0x12C0
#define EEPROM_CTRL_DATA_HI_MASK        0xFFFF
#define EEPROM_CTRL_DATA_HI_SHIFT       0
#define EEPROM_CTRL_ADDR_MASK           0x3FF
#define EEPROM_CTRL_ADDR_SHIFT          16
#define EEPROM_CTRL_ACK                 0x40000000
#define EEPROM_CTRL_RW                  0x80000000

#define REG_EEPROM_DATA_LO              0x12C4

#define REG_OTP_CTRL                    0x12F0
#define OTP_CTRL_CLK_EN                 0x0002

#define REG_PM_CTRL                     0x12F8
#define PM_CTRL_SDES_EN                 0x00000001
#define PM_CTRL_RBER_EN                 0x00000002
#define PM_CTRL_CLK_REQ_EN              0x00000004
#define PM_CTRL_ASPM_L1_EN              0x00000008
#define PM_CTRL_SERDES_L1_EN            0x00000010
#define PM_CTRL_SERDES_PLL_L1_EN        0x00000020
#define PM_CTRL_SERDES_PD_EX_L1         0x00000040
#define PM_CTRL_SERDES_BUDS_RX_L1_EN    0x00000080
#define PM_CTRL_L0S_ENTRY_TIMER_MASK    0xF
#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT   8
#define PM_CTRL_ASPM_L0S_EN             0x00001000
#define PM_CTRL_CLK_SWH_L1              0x00002000
#define PM_CTRL_CLK_PWM_VER1_1          0x00004000
#define PM_CTRL_RCVR_WT_TIMER           0x00008000
#define PM_CTRL_L1_ENTRY_TIMER_MASK     0xF
#define PM_CTRL_L1_ENTRY_TIMER_SHIFT    16
#define PM_CTRL_PM_REQ_TIMER_MASK       0xF
#define PM_CTRL_PM_REQ_TIMER_SHIFT      20
#define PM_CTRL_LCKDET_TIMER_MASK       0xF
#define PM_CTRL_LCKDET_TIMER_SHIFT      24
#define PM_CTRL_EN_BUFS_RX_L0S          0x10000000
#define PM_CTRL_SA_DLY_EN               0x20000000
#define PM_CTRL_MAC_ASPM_CHK            0x40000000
#define PM_CTRL_HOTRST                  0x80000000

#define REG_LTSSM_ID_CTRL               0x12FC
#define LTSSM_ID_EN_WRO                 0x1000
/* Selene Master Control Register */
#define REG_MASTER_CTRL                 0x1400
#define MASTER_CTRL_SOFT_RST            0x1
#define MASTER_CTRL_TEST_MODE_MASK      0x3
#define MASTER_CTRL_TEST_MODE_SHIFT     2
#define MASTER_CTRL_BERT_START          0x10
#define MASTER_CTRL_OOB_DIS_OFF         0x40
#define MASTER_CTRL_SA_TIMER_EN         0x80
#define MASTER_CTRL_MTIMER_EN           0x100
#define MASTER_CTRL_MANUAL_INT          0x200
#define MASTER_CTRL_TX_ITIMER_EN        0x400
#define MASTER_CTRL_RX_ITIMER_EN        0x800
#define MASTER_CTRL_CLK_SEL_DIS         0x1000
#define MASTER_CTRL_CLK_SWH_MODE        0x2000
#define MASTER_CTRL_INT_RDCLR           0x4000
#define MASTER_CTRL_REV_NUM_SHIFT       16
#define MASTER_CTRL_REV_NUM_MASK        0xff
#define MASTER_CTRL_DEV_ID_SHIFT        24
#define MASTER_CTRL_DEV_ID_MASK         0x7f
#define MASTER_CTRL_OTP_SEL             0x80000000

/* Timer Initial Value Register */
#define REG_MANUAL_TIMER_INIT           0x1404

/* IRQ ModeratorTimer Initial Value Register */
#define REG_IRQ_MODRT_TIMER_INIT        0x1408
#define IRQ_MODRT_TIMER_MASK            0xffff
#define IRQ_MODRT_TX_TIMER_SHIFT        0
#define IRQ_MODRT_RX_TIMER_SHIFT        16

#define REG_GPHY_CTRL                   0x140C
#define GPHY_CTRL_EXT_RESET             0x1
#define GPHY_CTRL_RTL_MODE              0x2
#define GPHY_CTRL_LED_MODE              0x4
#define GPHY_CTRL_ANEG_NOW              0x8
#define GPHY_CTRL_REV_ANEG              0x10
#define GPHY_CTRL_GATE_25M_EN           0x20
#define GPHY_CTRL_LPW_EXIT              0x40
#define GPHY_CTRL_PHY_IDDQ              0x80
#define GPHY_CTRL_PHY_IDDQ_DIS          0x100
#define GPHY_CTRL_GIGA_DIS              0x200
#define GPHY_CTRL_HIB_EN                0x400
#define GPHY_CTRL_HIB_PULSE             0x800
#define GPHY_CTRL_SEL_ANA_RST           0x1000
#define GPHY_CTRL_PHY_PLL_ON            0x2000
#define GPHY_CTRL_PWDOWN_HW             0x4000
#define GPHY_CTRL_PHY_PLL_BYPASS        0x8000

#define GPHY_CTRL_DEFAULT (              \
                GPHY_CTRL_SEL_ANA_RST   |\
                GPHY_CTRL_HIB_PULSE     |\
                GPHY_CTRL_HIB_EN)

#define GPHY_CTRL_PW_WOL_DIS (           \
                GPHY_CTRL_SEL_ANA_RST   |\
                GPHY_CTRL_HIB_PULSE     |\
                GPHY_CTRL_HIB_EN        |\
                GPHY_CTRL_PWDOWN_HW     |\
                GPHY_CTRL_PHY_IDDQ)

#define GPHY_CTRL_POWER_SAVING (        \
                GPHY_CTRL_SEL_ANA_RST   |\
                GPHY_CTRL_HIB_EN        |\
                GPHY_CTRL_HIB_PULSE     |\
                GPHY_CTRL_PWDOWN_HW     |\
                GPHY_CTRL_PHY_IDDQ)
/* Block IDLE Status Register */
#define REG_IDLE_STATUS                 0x1410
#define IDLE_STATUS_MASK                0x00FF
#define IDLE_STATUS_RXMAC_NO_IDLE       0x1
#define IDLE_STATUS_TXMAC_NO_IDLE       0x2
#define IDLE_STATUS_RXQ_NO_IDLE         0x4
#define IDLE_STATUS_TXQ_NO_IDLE         0x8
#define IDLE_STATUS_DMAR_NO_IDLE        0x10
#define IDLE_STATUS_DMAW_NO_IDLE        0x20
#define IDLE_STATUS_SMB_NO_IDLE         0x40
#define IDLE_STATUS_CMB_NO_IDLE         0x80

/* MDIO Control Register */
#define REG_MDIO_CTRL                   0x1414
#define MDIO_DATA_MASK                  0xffff  /* On MDIO write, the 16-bit
                                                 * control data to write to PHY
                                                 * MII management register */
#define MDIO_DATA_SHIFT                 0       /* On MDIO read, the 16-bit
                                                 * status data that was read
                                                 * from the PHY MII management register */
#define MDIO_REG_ADDR_MASK              0x1f    /* MDIO register address */
#define MDIO_REG_ADDR_SHIFT             16
#define MDIO_RW                         0x200000  /* 1: read, 0: write */
#define MDIO_SUP_PREAMBLE               0x400000  /* Suppress preamble */
#define MDIO_START                      0x800000  /* Write 1 to initiate the MDIO
                                                   * master. And this bit is self
                                                   * cleared after one cycle */
#define MDIO_CLK_SEL_SHIFT              24
#define MDIO_CLK_25_4                   0
#define MDIO_CLK_25_6                   2
#define MDIO_CLK_25_8                   3
#define MDIO_CLK_25_10                  4
#define MDIO_CLK_25_14                  5
#define MDIO_CLK_25_20                  6
#define MDIO_CLK_25_28                  7
#define MDIO_BUSY                       0x8000000
#define MDIO_AP_EN                      0x10000000
#define MDIO_WAIT_TIMES                 10

/* MII PHY Status Register */
#define REG_PHY_STATUS                  0x1418
#define PHY_GENERAL_STATUS_MASK         0xFFFF
#define PHY_STATUS_RECV_ENABLE          0x0001
#define PHY_OE_PWSP_STATUS_MASK         0x07FF
#define PHY_OE_PWSP_STATUS_SHIFT        16
#define PHY_STATUS_LPW_STATE            0x80000000
/* BIST Control and Status Register0 (for the Packet Memory) */
#define REG_BIST0_CTRL                  0x141c
#define BIST0_NOW                       0x1
#define BIST0_SRAM_FAIL                 0x2 /* 1: The SRAM failure is
                                             * un-repairable  because
                                             * it has address decoder
                                             * failure or more than 1 cell
                                             * stuck-to-x failure */
#define BIST0_FUSE_FLAG                 0x4

/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
#define REG_BIST1_CTRL                  0x1420
#define BIST1_NOW                       0x1
#define BIST1_SRAM_FAIL                 0x2
#define BIST1_FUSE_FLAG                 0x4

/* SerDes Lock Detect Control and Status Register */
#define REG_SERDES_LOCK                 0x1424
#define SERDES_LOCK_DETECT              0x1  /* SerDes lock detected. This signal
                                              * comes from Analog SerDes */
#define SERDES_LOCK_DETECT_EN           0x2  /* 1: Enable SerDes Lock detect function */
#define SERDES_LOCK_STS_SELFB_PLL_SHIFT 0xE
#define SERDES_LOCK_STS_SELFB_PLL_MASK  0x3
#define SERDES_OVCLK_18_25              0x0
#define SERDES_OVCLK_12_18              0x1
#define SERDES_OVCLK_0_4                0x2
#define SERDES_OVCLK_4_12               0x3
#define SERDES_MAC_CLK_SLOWDOWN         0x20000
#define SERDES_PYH_CLK_SLOWDOWN         0x40000

/* MAC Control Register  */
#define REG_MAC_CTRL                    0x1480
#define MAC_CTRL_TX_EN                  0x1
#define MAC_CTRL_RX_EN                  0x2
#define MAC_CTRL_TX_FLOW                0x4
#define MAC_CTRL_RX_FLOW                0x8
#define MAC_CTRL_LOOPBACK               0x10
#define MAC_CTRL_DUPLX                  0x20
#define MAC_CTRL_ADD_CRC                0x40
#define MAC_CTRL_PAD                    0x80
#define MAC_CTRL_LENCHK                 0x100
#define MAC_CTRL_HUGE_EN                0x200
#define MAC_CTRL_PRMLEN_SHIFT           10
#define MAC_CTRL_PRMLEN_MASK            0xf
#define MAC_CTRL_RMV_VLAN               0x4000
#define MAC_CTRL_PROMIS_EN              0x8000
#define MAC_CTRL_TX_PAUSE               0x10000
#define MAC_CTRL_SCNT                   0x20000
#define MAC_CTRL_SRST_TX                0x40000
#define MAC_CTRL_TX_SIMURST             0x80000
#define MAC_CTRL_SPEED_SHIFT            20
#define MAC_CTRL_SPEED_MASK             0x3
#define MAC_CTRL_DBG_TX_BKPRESURE       0x400000
#define MAC_CTRL_TX_HUGE                0x800000
#define MAC_CTRL_RX_CHKSUM_EN           0x1000000
#define MAC_CTRL_MC_ALL_EN              0x2000000
#define MAC_CTRL_BC_EN                  0x4000000
#define MAC_CTRL_DBG                    0x8000000
#define MAC_CTRL_SINGLE_PAUSE_EN        0x10000000
#define MAC_CTRL_HASH_ALG_CRC32         0x20000000
#define MAC_CTRL_SPEED_MODE_SW          0x40000000

/* MAC IPG/IFG Control Register  */
#define REG_MAC_IPG_IFG                 0x1484
#define MAC_IPG_IFG_IPGT_SHIFT          0       /* Desired back to back
                                                 * inter-packet gap. The
                                                 * default is 96-bit time */
#define MAC_IPG_IFG_IPGT_MASK           0x7f
#define MAC_IPG_IFG_MIFG_SHIFT          8       /* Minimum number of IFG to
                                                 * enforce in between RX frames */
#define MAC_IPG_IFG_MIFG_MASK           0xff    /* Frame gap below such IFP is dropped */
#define MAC_IPG_IFG_IPGR1_SHIFT         16      /* 64bit Carrier-Sense window */
#define MAC_IPG_IFG_IPGR1_MASK          0x7f
#define MAC_IPG_IFG_IPGR2_SHIFT         24      /* 96-bit IPG window */
#define MAC_IPG_IFG_IPGR2_MASK          0x7f

/* MAC STATION ADDRESS  */
#define REG_MAC_STA_ADDR                0x1488

/* Hash table for multicast address */
#define REG_RX_HASH_TABLE               0x1490

/* MAC Half-Duplex Control Register */
#define REG_MAC_HALF_DUPLX_CTRL         0x1498
#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT  0      /* Collision Window */
#define MAC_HALF_DUPLX_CTRL_LCOL_MASK   0x3ff
#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
#define MAC_HALF_DUPLX_CTRL_RETRY_MASK  0xf
#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN  0x10000
#define MAC_HALF_DUPLX_CTRL_NO_BACK_C   0x20000
#define MAC_HALF_DUPLX_CTRL_NO_BACK_P   0x40000 /* No back-off on backpressure,
                                                 * immediately start the
                                                 * transmission after back pressure */
#define MAC_HALF_DUPLX_CTRL_ABEBE        0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT  20      /* Maximum binary exponential number */
#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK   0xf
#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24      /* IPG to start JAM for collision based flow control in half-duplex */
#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK  0xf     /* mode. In unit of 8-bit time */

/* Maximum Frame Length Control Register   */
#define REG_MTU                         0x149c

/* Wake-On-Lan control register */
#define REG_WOL_CTRL                    0x14a0
#define WOL_PATTERN_EN                  0x00000001
#define WOL_PATTERN_PME_EN              0x00000002
#define WOL_MAGIC_EN                    0x00000004
#define WOL_MAGIC_PME_EN                0x00000008
#define WOL_LINK_CHG_EN                 0x00000010
#define WOL_LINK_CHG_PME_EN             0x00000020
#define WOL_PATTERN_ST                  0x00000100
#define WOL_MAGIC_ST                    0x00000200
#define WOL_LINKCHG_ST                  0x00000400
#define WOL_CLK_SWITCH_EN               0x00008000
#define WOL_PT0_EN                      0x00010000
#define WOL_PT1_EN                      0x00020000
#define WOL_PT2_EN                      0x00040000
#define WOL_PT3_EN                      0x00080000
#define WOL_PT4_EN                      0x00100000
#define WOL_PT5_EN                      0x00200000
#define WOL_PT6_EN                      0x00400000

/* WOL Length ( 2 DWORD ) */
#define REG_WOL_PATTERN_LEN             0x14a4
#define WOL_PT_LEN_MASK                 0x7f
#define WOL_PT0_LEN_SHIFT               0
#define WOL_PT1_LEN_SHIFT               8
#define WOL_PT2_LEN_SHIFT               16
#define WOL_PT3_LEN_SHIFT               24
#define WOL_PT4_LEN_SHIFT               0
#define WOL_PT5_LEN_SHIFT               8
#define WOL_PT6_LEN_SHIFT               16

/* Internal SRAM Partition Register */
#define RFDX_HEAD_ADDR_MASK             0x03FF
#define RFDX_HARD_ADDR_SHIFT            0
#define RFDX_TAIL_ADDR_MASK             0x03FF
#define RFDX_TAIL_ADDR_SHIFT            16

#define REG_SRAM_RFD0_INFO              0x1500
#define REG_SRAM_RFD1_INFO              0x1504
#define REG_SRAM_RFD2_INFO              0x1508
#define REG_SRAM_RFD3_INFO              0x150C

#define REG_RFD_NIC_LEN                 0x1510 /* In 8-bytes */
#define RFD_NIC_LEN_MASK                0x03FF

#define REG_SRAM_TRD_ADDR               0x1518
#define TPD_HEAD_ADDR_MASK              0x03FF
#define TPD_HEAD_ADDR_SHIFT             0
#define TPD_TAIL_ADDR_MASK              0x03FF
#define TPD_TAIL_ADDR_SHIFT             16

#define REG_SRAM_TRD_LEN                0x151C /* In 8-bytes */
#define TPD_NIC_LEN_MASK                0x03FF

#define REG_SRAM_RXF_ADDR               0x1520
#define REG_SRAM_RXF_LEN                0x1524
#define REG_SRAM_TXF_ADDR               0x1528
#define REG_SRAM_TXF_LEN                0x152C
#define REG_SRAM_TCPH_ADDR              0x1530
#define REG_SRAM_PKTH_ADDR              0x1532

/*
 * Load Ptr Register
 * Software sets this bit after the initialization of the head and tail */
#define REG_LOAD_PTR                    0x1534

/*
 * addresses of all descriptors, as well as the following descriptor
 * control register, which triggers each function block to load the head
 * pointer to prepare for the operation. This bit is then self-cleared
 * after one cycle.
 */
#define REG_RX_BASE_ADDR_HI             0x1540
#define REG_TX_BASE_ADDR_HI             0x1544
#define REG_SMB_BASE_ADDR_HI            0x1548
#define REG_SMB_BASE_ADDR_LO            0x154C
#define REG_RFD0_HEAD_ADDR_LO           0x1550
#define REG_RFD1_HEAD_ADDR_LO           0x1554
#define REG_RFD2_HEAD_ADDR_LO           0x1558
#define REG_RFD3_HEAD_ADDR_LO           0x155C
#define REG_RFD_RING_SIZE               0x1560
#define RFD_RING_SIZE_MASK              0x0FFF
#define REG_RX_BUF_SIZE                 0x1564
#define RX_BUF_SIZE_MASK                0xFFFF
#define REG_RRD0_HEAD_ADDR_LO           0x1568
#define REG_RRD1_HEAD_ADDR_LO           0x156C
#define REG_RRD2_HEAD_ADDR_LO           0x1570
#define REG_RRD3_HEAD_ADDR_LO           0x1574
#define REG_RRD_RING_SIZE               0x1578
#define RRD_RING_SIZE_MASK              0x0FFF
#define REG_HTPD_HEAD_ADDR_LO           0x157C
#define REG_NTPD_HEAD_ADDR_LO           0x1580
#define REG_TPD_RING_SIZE               0x1584
#define TPD_RING_SIZE_MASK              0xFFFF
#define REG_CMB_BASE_ADDR_LO            0x1588

/* RSS about */
#define REG_RSS_KEY0                    0x14B0
#define REG_RSS_KEY1                    0x14B4
#define REG_RSS_KEY2                    0x14B8
#define REG_RSS_KEY3                    0x14BC
#define REG_RSS_KEY4                    0x14C0
#define REG_RSS_KEY5                    0x14C4
#define REG_RSS_KEY6                    0x14C8
#define REG_RSS_KEY7                    0x14CC
#define REG_RSS_KEY8                    0x14D0
#define REG_RSS_KEY9                    0x14D4
#define REG_IDT_TABLE0                  0x14E0
#define REG_IDT_TABLE1                  0x14E4
#define REG_IDT_TABLE2                  0x14E8
#define REG_IDT_TABLE3                  0x14EC
#define REG_IDT_TABLE4                  0x14F0
#define REG_IDT_TABLE5                  0x14F4
#define REG_IDT_TABLE6                  0x14F8
#define REG_IDT_TABLE7                  0x14FC
#define REG_IDT_TABLE                   REG_IDT_TABLE0
#define REG_RSS_HASH_VALUE              0x15B0
#define REG_RSS_HASH_FLAG               0x15B4
#define REG_BASE_CPU_NUMBER             0x15B8

/* TXQ Control Register */
#define REG_TXQ_CTRL                    0x1590
#define TXQ_NUM_TPD_BURST_MASK          0xF
#define TXQ_NUM_TPD_BURST_SHIFT         0
#define TXQ_CTRL_IP_OPTION_EN           0x10
#define TXQ_CTRL_EN                     0x20
#define TXQ_CTRL_ENH_MODE               0x40
#define TXQ_CTRL_LS_8023_EN             0x80
#define TXQ_TXF_BURST_NUM_SHIFT         16
#define TXQ_TXF_BURST_NUM_MASK          0xFFFF

/* Jumbo packet Threshold for task offload */
#define REG_TX_TSO_OFFLOAD_THRESH       0x1594 /* In 8-bytes */
#define TX_TSO_OFFLOAD_THRESH_MASK      0x07FF

#define REG_TXF_WATER_MARK              0x1598 /* In 8-bytes */
#define TXF_WATER_MARK_MASK             0x0FFF
#define TXF_LOW_WATER_MARK_SHIFT        0
#define TXF_HIGH_WATER_MARK_SHIFT       16
#define TXQ_CTRL_BURST_MODE_EN          0x80000000

#define REG_THRUPUT_MON_CTRL            0x159C
#define THRUPUT_MON_RATE_MASK           0x3
#define THRUPUT_MON_RATE_SHIFT          0
#define THRUPUT_MON_EN                  0x80

/* RXQ Control Register */
#define REG_RXQ_CTRL                    0x15A0
#define ASPM_THRUPUT_LIMIT_MASK         0x3
#define ASPM_THRUPUT_LIMIT_SHIFT        0
#define ASPM_THRUPUT_LIMIT_NO           0x00
#define ASPM_THRUPUT_LIMIT_1M           0x01
#define ASPM_THRUPUT_LIMIT_10M          0x02
#define ASPM_THRUPUT_LIMIT_100M         0x04
#define RXQ1_CTRL_EN                    0x10
#define RXQ2_CTRL_EN                    0x20
#define RXQ3_CTRL_EN                    0x40
#define IPV6_CHKSUM_CTRL_EN             0x80
#define RSS_HASH_BITS_MASK              0x00FF
#define RSS_HASH_BITS_SHIFT             8
#define RSS_HASH_IPV4                   0x10000
#define RSS_HASH_IPV4_TCP               0x20000
#define RSS_HASH_IPV6                   0x40000
#define RSS_HASH_IPV6_TCP               0x80000
#define RXQ_RFD_BURST_NUM_MASK          0x003F
#define RXQ_RFD_BURST_NUM_SHIFT         20
#define RSS_MODE_MASK                   0x0003
#define RSS_MODE_SHIFT                  26
#define RSS_NIP_QUEUE_SEL_MASK          0x1
#define RSS_NIP_QUEUE_SEL_SHIFT         28
#define RRS_HASH_CTRL_EN                0x20000000
#define RX_CUT_THRU_EN                  0x40000000
#define RXQ_CTRL_EN                     0x80000000

#define REG_RFD_FREE_THRESH             0x15A4
#define RFD_FREE_THRESH_MASK            0x003F
#define RFD_FREE_HI_THRESH_SHIFT        0
#define RFD_FREE_LO_THRESH_SHIFT        6

/* RXF flow control register */
#define REG_RXQ_RXF_PAUSE_THRESH        0x15A8
#define RXQ_RXF_PAUSE_TH_HI_SHIFT       0
#define RXQ_RXF_PAUSE_TH_HI_MASK        0x0FFF
#define RXQ_RXF_PAUSE_TH_LO_SHIFT       16
#define RXQ_RXF_PAUSE_TH_LO_MASK        0x0FFF

#define REG_RXD_DMA_CTRL                0x15AC
#define RXD_DMA_THRESH_MASK             0x0FFF  /* In 8-bytes */
#define RXD_DMA_THRESH_SHIFT            0
#define RXD_DMA_DOWN_TIMER_MASK         0xFFFF
#define RXD_DMA_DOWN_TIMER_SHIFT        16

/* DMA Engine Control Register */
#define REG_DMA_CTRL                    0x15C0
#define DMA_CTRL_DMAR_IN_ORDER          0x1
#define DMA_CTRL_DMAR_ENH_ORDER         0x2
#define DMA_CTRL_DMAR_OUT_ORDER         0x4
#define DMA_CTRL_RCB_VALUE              0x8
#define DMA_CTRL_DMAR_BURST_LEN_MASK    0x0007
#define DMA_CTRL_DMAR_BURST_LEN_SHIFT   4
#define DMA_CTRL_DMAW_BURST_LEN_MASK    0x0007
#define DMA_CTRL_DMAW_BURST_LEN_SHIFT   7
#define DMA_CTRL_DMAR_REQ_PRI           0x400
#define DMA_CTRL_DMAR_DLY_CNT_MASK      0x001F
#define DMA_CTRL_DMAR_DLY_CNT_SHIFT     11
#define DMA_CTRL_DMAW_DLY_CNT_MASK      0x000F
#define DMA_CTRL_DMAW_DLY_CNT_SHIFT     16
#define DMA_CTRL_CMB_EN                 0x100000
#define DMA_CTRL_SMB_EN                 0x200000
#define DMA_CTRL_CMB_NOW                0x400000
#define MAC_CTRL_SMB_DIS                0x1000000
#define DMA_CTRL_SMB_NOW                0x80000000

/* CMB/SMB Control Register */
#define REG_SMB_STAT_TIMER              0x15C4  /* 2us resolution */
#define SMB_STAT_TIMER_MASK             0xFFFFFF
#define REG_CMB_TPD_THRESH              0x15C8
#define CMB_TPD_THRESH_MASK             0xFFFF
#define REG_CMB_TX_TIMER                0x15CC  /* 2us resolution */
#define CMB_TX_TIMER_MASK               0xFFFF

/* Mail box */
#define MB_RFDX_PROD_IDX_MASK           0xFFFF
#define REG_MB_RFD0_PROD_IDX            0x15E0
#define REG_MB_RFD1_PROD_IDX            0x15E4
#define REG_MB_RFD2_PROD_IDX            0x15E8
#define REG_MB_RFD3_PROD_IDX            0x15EC

#define MB_PRIO_PROD_IDX_MASK           0xFFFF
#define REG_MB_PRIO_PROD_IDX            0x15F0
#define MB_HTPD_PROD_IDX_SHIFT          0
#define MB_NTPD_PROD_IDX_SHIFT          16

#define MB_PRIO_CONS_IDX_MASK           0xFFFF
#define REG_MB_PRIO_CONS_IDX            0x15F4
#define MB_HTPD_CONS_IDX_SHIFT          0
#define MB_NTPD_CONS_IDX_SHIFT          16

#define REG_MB_RFD01_CONS_IDX           0x15F8
#define MB_RFD0_CONS_IDX_MASK           0x0000FFFF
#define MB_RFD1_CONS_IDX_MASK           0xFFFF0000
#define REG_MB_RFD23_CONS_IDX           0x15FC
#define MB_RFD2_CONS_IDX_MASK           0x0000FFFF
#define MB_RFD3_CONS_IDX_MASK           0xFFFF0000

/* Interrupt Status Register */
#define REG_ISR                         0x1600
#define ISR_SMB                         0x00000001
#define ISR_TIMER                       0x00000002
/*
 * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
 * in Table 51 Selene Master Control Register (Offset 0x1400).
 */
#define ISR_MANUAL                      0x00000004
#define ISR_HW_RXF_OV                   0x00000008 /* RXF overflow interrupt */
#define ISR_RFD0_UR                     0x00000010 /* RFD0 under run */
#define ISR_RFD1_UR                     0x00000020
#define ISR_RFD2_UR                     0x00000040
#define ISR_RFD3_UR                     0x00000080
#define ISR_TXF_UR                      0x00000100
#define ISR_DMAR_TO_RST                 0x00000200
#define ISR_DMAW_TO_RST                 0x00000400
#define ISR_TX_CREDIT                   0x00000800
#define ISR_GPHY                        0x00001000
/* GPHY low power state interrupt */
#define ISR_GPHY_LPW                    0x00002000
#define ISR_TXQ_TO_RST                  0x00004000
#define ISR_TX_PKT                      0x00008000
#define ISR_RX_PKT_0                    0x00010000
#define ISR_RX_PKT_1                    0x00020000
#define ISR_RX_PKT_2                    0x00040000
#define ISR_RX_PKT_3                    0x00080000
#define ISR_MAC_RX                      0x00100000
#define ISR_MAC_TX                      0x00200000
#define ISR_UR_DETECTED                 0x00400000
#define ISR_FERR_DETECTED               0x00800000
#define ISR_NFERR_DETECTED              0x01000000
#define ISR_CERR_DETECTED               0x02000000
#define ISR_PHY_LINKDOWN                0x04000000
#define ISR_DIS_INT                     0x80000000

/* Interrupt Mask Register */
#define REG_IMR                         0x1604

#define IMR_NORMAL_MASK         (\
                ISR_MANUAL      |\
                ISR_HW_RXF_OV   |\
                ISR_RFD0_UR     |\
                ISR_TXF_UR      |\
                ISR_DMAR_TO_RST |\
                ISR_TXQ_TO_RST  |\
                ISR_DMAW_TO_RST |\
                ISR_GPHY        |\
                ISR_TX_PKT      |\
                ISR_RX_PKT_0    |\
                ISR_GPHY_LPW    |\
                ISR_PHY_LINKDOWN)

#define ISR_RX_PKT      (\
        ISR_RX_PKT_0    |\
        ISR_RX_PKT_1    |\
        ISR_RX_PKT_2    |\
        ISR_RX_PKT_3)

#define ISR_OVER        (\
        ISR_RFD0_UR     |\
        ISR_RFD1_UR     |\
        ISR_RFD2_UR     |\
        ISR_RFD3_UR     |\
        ISR_HW_RXF_OV   |\
        ISR_TXF_UR)

#define ISR_ERROR       (\
        ISR_DMAR_TO_RST |\
        ISR_TXQ_TO_RST  |\
        ISR_DMAW_TO_RST |\
        ISR_PHY_LINKDOWN)

#define REG_INT_RETRIG_TIMER            0x1608
#define INT_RETRIG_TIMER_MASK           0xFFFF

#define REG_HDS_CTRL                    0x160C
#define HDS_CTRL_EN                     0x0001
#define HDS_CTRL_BACKFILLSIZE_SHIFT     8
#define HDS_CTRL_BACKFILLSIZE_MASK      0x0FFF
#define HDS_CTRL_MAX_HDRSIZE_SHIFT      20
#define HDS_CTRL_MAC_HDRSIZE_MASK       0x0FFF

#define REG_MAC_RX_STATUS_BIN           0x1700
#define REG_MAC_RX_STATUS_END           0x175c
#define REG_MAC_TX_STATUS_BIN           0x1760
#define REG_MAC_TX_STATUS_END           0x17c0

#define REG_CLK_GATING_CTRL             0x1814
#define CLK_GATING_DMAW_EN              0x0001
#define CLK_GATING_DMAR_EN              0x0002
#define CLK_GATING_TXQ_EN               0x0004
#define CLK_GATING_RXQ_EN               0x0008
#define CLK_GATING_TXMAC_EN             0x0010
#define CLK_GATING_RXMAC_EN             0x0020

#define CLK_GATING_EN_ALL       (CLK_GATING_DMAW_EN |\
                                 CLK_GATING_DMAR_EN |\
                                 CLK_GATING_TXQ_EN  |\
                                 CLK_GATING_RXQ_EN  |\
                                 CLK_GATING_TXMAC_EN|\
                                 CLK_GATING_RXMAC_EN)

/* DEBUG ADDR */
#define REG_DEBUG_DATA0                 0x1900
#define REG_DEBUG_DATA1                 0x1904

#define L1D_MPW_PHYID1                  0xD01C  /* V7 */
#define L1D_MPW_PHYID2                  0xD01D  /* V1-V6 */
#define L1D_MPW_PHYID3                  0xD01E  /* V8 */


/* Autoneg Advertisement Register */
#define ADVERTISE_DEFAULT_CAP \
        (ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)

/* 1000BASE-T Control Register */
#define GIGA_CR_1000T_REPEATER_DTE      0x0400  /* 1=Repeater/switch device port 0=DTE device */

#define GIGA_CR_1000T_MS_VALUE          0x0800  /* 1=Configure PHY as Master 0=Configure PHY as Slave */
#define GIGA_CR_1000T_MS_ENABLE         0x1000  /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
#define GIGA_CR_1000T_TEST_MODE_NORMAL  0x0000  /* Normal Operation */
#define GIGA_CR_1000T_TEST_MODE_1       0x2000  /* Transmit Waveform test */
#define GIGA_CR_1000T_TEST_MODE_2       0x4000  /* Master Transmit Jitter test */
#define GIGA_CR_1000T_TEST_MODE_3       0x6000  /* Slave Transmit Jitter test */
#define GIGA_CR_1000T_TEST_MODE_4       0x8000  /* Transmitter Distortion test */
#define GIGA_CR_1000T_SPEED_MASK        0x0300
#define GIGA_CR_1000T_DEFAULT_CAP       0x0300

/* PHY Specific Status Register */
#define MII_GIGA_PSSR                   0x11
#define GIGA_PSSR_SPD_DPLX_RESOLVED     0x0800  /* 1=Speed & Duplex resolved */
#define GIGA_PSSR_DPLX                  0x2000  /* 1=Duplex 0=Half Duplex */
#define GIGA_PSSR_SPEED                 0xC000  /* Speed, bits 14:15 */
#define GIGA_PSSR_10MBS                 0x0000  /* 00=10Mbs */
#define GIGA_PSSR_100MBS                0x4000  /* 01=100Mbs */
#define GIGA_PSSR_1000MBS               0x8000  /* 10=1000Mbs */

/* PHY Interrupt Enable Register */
#define MII_IER                         0x12
#define IER_LINK_UP                     0x0400
#define IER_LINK_DOWN                   0x0800

/* PHY Interrupt Status Register */
#define MII_ISR                         0x13
#define ISR_LINK_UP                     0x0400
#define ISR_LINK_DOWN                   0x0800

/* Cable-Detect-Test Control Register */
#define MII_CDTC                        0x16
#define CDTC_EN_OFF                     0   /* sc */
#define CDTC_EN_BITS                    1
#define CDTC_PAIR_OFF                   8
#define CDTC_PAIR_BIT                   2

/* Cable-Detect-Test Status Register */
#define MII_CDTS                        0x1C
#define CDTS_STATUS_OFF                 8
#define CDTS_STATUS_BITS                2
#define CDTS_STATUS_NORMAL              0
#define CDTS_STATUS_SHORT               1
#define CDTS_STATUS_OPEN                2
#define CDTS_STATUS_INVALID             3

#define MII_DBG_ADDR                    0x1D
#define MII_DBG_DATA                    0x1E

#define MII_ANA_CTRL_0                  0x0
#define ANA_RESTART_CAL                 0x0001
#define ANA_MANUL_SWICH_ON_SHIFT        0x1
#define ANA_MANUL_SWICH_ON_MASK         0xF
#define ANA_MAN_ENABLE                  0x0020
#define ANA_SEL_HSP                     0x0040
#define ANA_EN_HB                       0x0080
#define ANA_EN_HBIAS                    0x0100
#define ANA_OEN_125M                    0x0200
#define ANA_EN_LCKDT                    0x0400
#define ANA_LCKDT_PHY                   0x0800
#define ANA_AFE_MODE                    0x1000
#define ANA_VCO_SLOW                    0x2000
#define ANA_VCO_FAST                    0x4000
#define ANA_SEL_CLK125M_DSP             0x8000

#define MII_ANA_CTRL_4                  0x4
#define ANA_IECHO_ADJ_MASK              0xF
#define ANA_IECHO_ADJ_3_SHIFT           0
#define ANA_IECHO_ADJ_2_SHIFT           4
#define ANA_IECHO_ADJ_1_SHIFT           8
#define ANA_IECHO_ADJ_0_SHIFT           12

#define MII_ANA_CTRL_5                  0x5
#define ANA_SERDES_CDR_BW_SHIFT         0
#define ANA_SERDES_CDR_BW_MASK          0x3
#define ANA_MS_PAD_DBG                  0x0004
#define ANA_SPEEDUP_DBG                 0x0008
#define ANA_SERDES_TH_LOS_SHIFT         4
#define ANA_SERDES_TH_LOS_MASK          0x3
#define ANA_SERDES_EN_DEEM              0x0040
#define ANA_SERDES_TXELECIDLE           0x0080
#define ANA_SERDES_BEACON               0x0100
#define ANA_SERDES_HALFTXDR             0x0200
#define ANA_SERDES_SEL_HSP              0x0400
#define ANA_SERDES_EN_PLL               0x0800
#define ANA_SERDES_EN                   0x1000
#define ANA_SERDES_EN_LCKDT             0x2000

#define MII_ANA_CTRL_11                 0xB
#define ANA_PS_HIB_EN                   0x8000

#define MII_ANA_CTRL_18                 0x12
#define ANA_TEST_MODE_10BT_01SHIFT      0
#define ANA_TEST_MODE_10BT_01MASK       0x3
#define ANA_LOOP_SEL_10BT               0x0004
#define ANA_RGMII_MODE_SW               0x0008
#define ANA_EN_LONGECABLE               0x0010
#define ANA_TEST_MODE_10BT_2            0x0020
#define ANA_EN_10BT_IDLE                0x0400
#define ANA_EN_MASK_TB                  0x0800
#define ANA_TRIGGER_SEL_TIMER_SHIFT     12
#define ANA_TRIGGER_SEL_TIMER_MASK      0x3
#define ANA_INTERVAL_SEL_TIMER_SHIFT    14
#define ANA_INTERVAL_SEL_TIMER_MASK     0x3

#define MII_ANA_CTRL_41                 0x29
#define ANA_TOP_PS_EN                   0x8000

#define MII_ANA_CTRL_54                 0x36
#define ANA_LONG_CABLE_TH_100_SHIFT     0
#define ANA_LONG_CABLE_TH_100_MASK      0x3F
#define ANA_DESERVED                    0x0040
#define ANA_EN_LIT_CH                   0x0080
#define ANA_SHORT_CABLE_TH_100_SHIFT    8
#define ANA_SHORT_CABLE_TH_100_MASK     0x3F
#define ANA_BP_BAD_LINK_ACCUM           0x4000
#define ANA_BP_SMALL_BW                 0x8000

#endif /*_ATL1C_HW_H_*/