include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / net / spider_net.c
blob1ff3491c82402aee8e468e660d53c523c1f403cf
1 /*
2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
13 * any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
32 #include <linux/in.h>
33 #include <linux/init.h>
34 #include <linux/interrupt.h>
35 #include <linux/gfp.h>
36 #include <linux/ioport.h>
37 #include <linux/ip.h>
38 #include <linux/kernel.h>
39 #include <linux/mii.h>
40 #include <linux/module.h>
41 #include <linux/netdevice.h>
42 #include <linux/device.h>
43 #include <linux/pci.h>
44 #include <linux/skbuff.h>
45 #include <linux/tcp.h>
46 #include <linux/types.h>
47 #include <linux/vmalloc.h>
48 #include <linux/wait.h>
49 #include <linux/workqueue.h>
50 #include <linux/bitops.h>
51 #include <asm/pci-bridge.h>
52 #include <net/checksum.h>
54 #include "spider_net.h"
56 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
57 "<Jens.Osterkamp@de.ibm.com>");
58 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
59 MODULE_LICENSE("GPL");
60 MODULE_VERSION(VERSION);
61 MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME);
63 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
64 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
66 module_param(rx_descriptors, int, 0444);
67 module_param(tx_descriptors, int, 0444);
69 MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
70 "in rx chains");
71 MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
72 "in tx chain");
74 char spider_net_driver_name[] = "spidernet";
76 static DEFINE_PCI_DEVICE_TABLE(spider_net_pci_tbl) = {
77 { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
78 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
79 { 0, }
82 MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
84 /**
85 * spider_net_read_reg - reads an SMMIO register of a card
86 * @card: device structure
87 * @reg: register to read from
89 * returns the content of the specified SMMIO register.
91 static inline u32
92 spider_net_read_reg(struct spider_net_card *card, u32 reg)
94 /* We use the powerpc specific variants instead of readl_be() because
95 * we know spidernet is not a real PCI device and we can thus avoid the
96 * performance hit caused by the PCI workarounds.
98 return in_be32(card->regs + reg);
102 * spider_net_write_reg - writes to an SMMIO register of a card
103 * @card: device structure
104 * @reg: register to write to
105 * @value: value to write into the specified SMMIO register
107 static inline void
108 spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
110 /* We use the powerpc specific variants instead of writel_be() because
111 * we know spidernet is not a real PCI device and we can thus avoid the
112 * performance hit caused by the PCI workarounds.
114 out_be32(card->regs + reg, value);
117 /** spider_net_write_phy - write to phy register
118 * @netdev: adapter to be written to
119 * @mii_id: id of MII
120 * @reg: PHY register
121 * @val: value to be written to phy register
123 * spider_net_write_phy_register writes to an arbitrary PHY
124 * register via the spider GPCWOPCMD register. We assume the queue does
125 * not run full (not more than 15 commands outstanding).
127 static void
128 spider_net_write_phy(struct net_device *netdev, int mii_id,
129 int reg, int val)
131 struct spider_net_card *card = netdev_priv(netdev);
132 u32 writevalue;
134 writevalue = ((u32)mii_id << 21) |
135 ((u32)reg << 16) | ((u32)val);
137 spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
140 /** spider_net_read_phy - read from phy register
141 * @netdev: network device to be read from
142 * @mii_id: id of MII
143 * @reg: PHY register
145 * Returns value read from PHY register
147 * spider_net_write_phy reads from an arbitrary PHY
148 * register via the spider GPCROPCMD register
150 static int
151 spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
153 struct spider_net_card *card = netdev_priv(netdev);
154 u32 readvalue;
156 readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
157 spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
159 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
160 * interrupt, as we poll for the completion of the read operation
161 * in spider_net_read_phy. Should take about 50 us */
162 do {
163 readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
164 } while (readvalue & SPIDER_NET_GPREXEC);
166 readvalue &= SPIDER_NET_GPRDAT_MASK;
168 return readvalue;
172 * spider_net_setup_aneg - initial auto-negotiation setup
173 * @card: device structure
175 static void
176 spider_net_setup_aneg(struct spider_net_card *card)
178 struct mii_phy *phy = &card->phy;
179 u32 advertise = 0;
180 u16 bmsr, estat;
182 bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
183 estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
185 if (bmsr & BMSR_10HALF)
186 advertise |= ADVERTISED_10baseT_Half;
187 if (bmsr & BMSR_10FULL)
188 advertise |= ADVERTISED_10baseT_Full;
189 if (bmsr & BMSR_100HALF)
190 advertise |= ADVERTISED_100baseT_Half;
191 if (bmsr & BMSR_100FULL)
192 advertise |= ADVERTISED_100baseT_Full;
194 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
195 advertise |= SUPPORTED_1000baseT_Full;
196 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
197 advertise |= SUPPORTED_1000baseT_Half;
199 mii_phy_probe(phy, phy->mii_id);
200 phy->def->ops->setup_aneg(phy, advertise);
205 * spider_net_rx_irq_off - switch off rx irq on this spider card
206 * @card: device structure
208 * switches off rx irq by masking them out in the GHIINTnMSK register
210 static void
211 spider_net_rx_irq_off(struct spider_net_card *card)
213 u32 regvalue;
215 regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
216 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
220 * spider_net_rx_irq_on - switch on rx irq on this spider card
221 * @card: device structure
223 * switches on rx irq by enabling them in the GHIINTnMSK register
225 static void
226 spider_net_rx_irq_on(struct spider_net_card *card)
228 u32 regvalue;
230 regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
231 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
235 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
236 * @card: card structure
238 * spider_net_set_promisc sets the unicast destination address filter and
239 * thus either allows for non-promisc mode or promisc mode
241 static void
242 spider_net_set_promisc(struct spider_net_card *card)
244 u32 macu, macl;
245 struct net_device *netdev = card->netdev;
247 if (netdev->flags & IFF_PROMISC) {
248 /* clear destination entry 0 */
249 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
250 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
251 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
252 SPIDER_NET_PROMISC_VALUE);
253 } else {
254 macu = netdev->dev_addr[0];
255 macu <<= 8;
256 macu |= netdev->dev_addr[1];
257 memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
259 macu |= SPIDER_NET_UA_DESCR_VALUE;
260 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
261 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
262 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
263 SPIDER_NET_NONPROMISC_VALUE);
268 * spider_net_get_mac_address - read mac address from spider card
269 * @card: device structure
271 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
273 static int
274 spider_net_get_mac_address(struct net_device *netdev)
276 struct spider_net_card *card = netdev_priv(netdev);
277 u32 macl, macu;
279 macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL);
280 macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU);
282 netdev->dev_addr[0] = (macu >> 24) & 0xff;
283 netdev->dev_addr[1] = (macu >> 16) & 0xff;
284 netdev->dev_addr[2] = (macu >> 8) & 0xff;
285 netdev->dev_addr[3] = macu & 0xff;
286 netdev->dev_addr[4] = (macl >> 8) & 0xff;
287 netdev->dev_addr[5] = macl & 0xff;
289 if (!is_valid_ether_addr(&netdev->dev_addr[0]))
290 return -EINVAL;
292 return 0;
296 * spider_net_get_descr_status -- returns the status of a descriptor
297 * @descr: descriptor to look at
299 * returns the status as in the dmac_cmd_status field of the descriptor
301 static inline int
302 spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
304 return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
308 * spider_net_free_chain - free descriptor chain
309 * @card: card structure
310 * @chain: address of chain
313 static void
314 spider_net_free_chain(struct spider_net_card *card,
315 struct spider_net_descr_chain *chain)
317 struct spider_net_descr *descr;
319 descr = chain->ring;
320 do {
321 descr->bus_addr = 0;
322 descr->hwdescr->next_descr_addr = 0;
323 descr = descr->next;
324 } while (descr != chain->ring);
326 dma_free_coherent(&card->pdev->dev, chain->num_desc,
327 chain->hwring, chain->dma_addr);
331 * spider_net_init_chain - alloc and link descriptor chain
332 * @card: card structure
333 * @chain: address of chain
335 * We manage a circular list that mirrors the hardware structure,
336 * except that the hardware uses bus addresses.
338 * Returns 0 on success, <0 on failure
340 static int
341 spider_net_init_chain(struct spider_net_card *card,
342 struct spider_net_descr_chain *chain)
344 int i;
345 struct spider_net_descr *descr;
346 struct spider_net_hw_descr *hwdescr;
347 dma_addr_t buf;
348 size_t alloc_size;
350 alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
352 chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
353 &chain->dma_addr, GFP_KERNEL);
355 if (!chain->hwring)
356 return -ENOMEM;
358 memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
360 /* Set up the hardware pointers in each descriptor */
361 descr = chain->ring;
362 hwdescr = chain->hwring;
363 buf = chain->dma_addr;
364 for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
365 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
366 hwdescr->next_descr_addr = 0;
368 descr->hwdescr = hwdescr;
369 descr->bus_addr = buf;
370 descr->next = descr + 1;
371 descr->prev = descr - 1;
373 buf += sizeof(struct spider_net_hw_descr);
375 /* do actual circular list */
376 (descr-1)->next = chain->ring;
377 chain->ring->prev = descr-1;
379 spin_lock_init(&chain->lock);
380 chain->head = chain->ring;
381 chain->tail = chain->ring;
382 return 0;
386 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
387 * @card: card structure
389 * returns 0 on success, <0 on failure
391 static void
392 spider_net_free_rx_chain_contents(struct spider_net_card *card)
394 struct spider_net_descr *descr;
396 descr = card->rx_chain.head;
397 do {
398 if (descr->skb) {
399 pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
400 SPIDER_NET_MAX_FRAME,
401 PCI_DMA_BIDIRECTIONAL);
402 dev_kfree_skb(descr->skb);
403 descr->skb = NULL;
405 descr = descr->next;
406 } while (descr != card->rx_chain.head);
410 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
411 * @card: card structure
412 * @descr: descriptor to re-init
414 * Return 0 on success, <0 on failure.
416 * Allocates a new rx skb, iommu-maps it and attaches it to the
417 * descriptor. Mark the descriptor as activated, ready-to-use.
419 static int
420 spider_net_prepare_rx_descr(struct spider_net_card *card,
421 struct spider_net_descr *descr)
423 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
424 dma_addr_t buf;
425 int offset;
426 int bufsize;
428 /* we need to round up the buffer size to a multiple of 128 */
429 bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
430 (~(SPIDER_NET_RXBUF_ALIGN - 1));
432 /* and we need to have it 128 byte aligned, therefore we allocate a
433 * bit more */
434 /* allocate an skb */
435 descr->skb = netdev_alloc_skb(card->netdev,
436 bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
437 if (!descr->skb) {
438 if (netif_msg_rx_err(card) && net_ratelimit())
439 dev_err(&card->netdev->dev,
440 "Not enough memory to allocate rx buffer\n");
441 card->spider_stats.alloc_rx_skb_error++;
442 return -ENOMEM;
444 hwdescr->buf_size = bufsize;
445 hwdescr->result_size = 0;
446 hwdescr->valid_size = 0;
447 hwdescr->data_status = 0;
448 hwdescr->data_error = 0;
450 offset = ((unsigned long)descr->skb->data) &
451 (SPIDER_NET_RXBUF_ALIGN - 1);
452 if (offset)
453 skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
454 /* iommu-map the skb */
455 buf = pci_map_single(card->pdev, descr->skb->data,
456 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
457 if (pci_dma_mapping_error(card->pdev, buf)) {
458 dev_kfree_skb_any(descr->skb);
459 descr->skb = NULL;
460 if (netif_msg_rx_err(card) && net_ratelimit())
461 dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
462 card->spider_stats.rx_iommu_map_error++;
463 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
464 } else {
465 hwdescr->buf_addr = buf;
466 wmb();
467 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
468 SPIDER_NET_DMAC_NOINTR_COMPLETE;
471 return 0;
475 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
476 * @card: card structure
478 * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
479 * chip by writing to the appropriate register. DMA is enabled in
480 * spider_net_enable_rxdmac.
482 static inline void
483 spider_net_enable_rxchtails(struct spider_net_card *card)
485 /* assume chain is aligned correctly */
486 spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
487 card->rx_chain.tail->bus_addr);
491 * spider_net_enable_rxdmac - enables a receive DMA controller
492 * @card: card structure
494 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
495 * in the GDADMACCNTR register
497 static inline void
498 spider_net_enable_rxdmac(struct spider_net_card *card)
500 wmb();
501 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
502 SPIDER_NET_DMA_RX_VALUE);
506 * spider_net_disable_rxdmac - disables the receive DMA controller
507 * @card: card structure
509 * spider_net_disable_rxdmac terminates processing on the DMA controller
510 * by turing off the DMA controller, with the force-end flag set.
512 static inline void
513 spider_net_disable_rxdmac(struct spider_net_card *card)
515 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
516 SPIDER_NET_DMA_RX_FEND_VALUE);
520 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
521 * @card: card structure
523 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
525 static void
526 spider_net_refill_rx_chain(struct spider_net_card *card)
528 struct spider_net_descr_chain *chain = &card->rx_chain;
529 unsigned long flags;
531 /* one context doing the refill (and a second context seeing that
532 * and omitting it) is ok. If called by NAPI, we'll be called again
533 * as spider_net_decode_one_descr is called several times. If some
534 * interrupt calls us, the NAPI is about to clean up anyway. */
535 if (!spin_trylock_irqsave(&chain->lock, flags))
536 return;
538 while (spider_net_get_descr_status(chain->head->hwdescr) ==
539 SPIDER_NET_DESCR_NOT_IN_USE) {
540 if (spider_net_prepare_rx_descr(card, chain->head))
541 break;
542 chain->head = chain->head->next;
545 spin_unlock_irqrestore(&chain->lock, flags);
549 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
550 * @card: card structure
552 * Returns 0 on success, <0 on failure.
554 static int
555 spider_net_alloc_rx_skbs(struct spider_net_card *card)
557 struct spider_net_descr_chain *chain = &card->rx_chain;
558 struct spider_net_descr *start = chain->tail;
559 struct spider_net_descr *descr = start;
561 /* Link up the hardware chain pointers */
562 do {
563 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
564 descr = descr->next;
565 } while (descr != start);
567 /* Put at least one buffer into the chain. if this fails,
568 * we've got a problem. If not, spider_net_refill_rx_chain
569 * will do the rest at the end of this function. */
570 if (spider_net_prepare_rx_descr(card, chain->head))
571 goto error;
572 else
573 chain->head = chain->head->next;
575 /* This will allocate the rest of the rx buffers;
576 * if not, it's business as usual later on. */
577 spider_net_refill_rx_chain(card);
578 spider_net_enable_rxdmac(card);
579 return 0;
581 error:
582 spider_net_free_rx_chain_contents(card);
583 return -ENOMEM;
587 * spider_net_get_multicast_hash - generates hash for multicast filter table
588 * @addr: multicast address
590 * returns the hash value.
592 * spider_net_get_multicast_hash calculates a hash value for a given multicast
593 * address, that is used to set the multicast filter tables
595 static u8
596 spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
598 u32 crc;
599 u8 hash;
600 char addr_for_crc[ETH_ALEN] = { 0, };
601 int i, bit;
603 for (i = 0; i < ETH_ALEN * 8; i++) {
604 bit = (addr[i / 8] >> (i % 8)) & 1;
605 addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
608 crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
610 hash = (crc >> 27);
611 hash <<= 3;
612 hash |= crc & 7;
613 hash &= 0xff;
615 return hash;
619 * spider_net_set_multi - sets multicast addresses and promisc flags
620 * @netdev: interface device structure
622 * spider_net_set_multi configures multicast addresses as needed for the
623 * netdev interface. It also sets up multicast, allmulti and promisc
624 * flags appropriately
626 static void
627 spider_net_set_multi(struct net_device *netdev)
629 struct netdev_hw_addr *ha;
630 u8 hash;
631 int i;
632 u32 reg;
633 struct spider_net_card *card = netdev_priv(netdev);
634 unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] =
635 {0, };
637 spider_net_set_promisc(card);
639 if (netdev->flags & IFF_ALLMULTI) {
640 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
641 set_bit(i, bitmask);
643 goto write_hash;
646 /* well, we know, what the broadcast hash value is: it's xfd
647 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
648 set_bit(0xfd, bitmask);
650 netdev_for_each_mc_addr(ha, netdev) {
651 hash = spider_net_get_multicast_hash(netdev, ha->addr);
652 set_bit(hash, bitmask);
655 write_hash:
656 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
657 reg = 0;
658 if (test_bit(i * 4, bitmask))
659 reg += 0x08;
660 reg <<= 8;
661 if (test_bit(i * 4 + 1, bitmask))
662 reg += 0x08;
663 reg <<= 8;
664 if (test_bit(i * 4 + 2, bitmask))
665 reg += 0x08;
666 reg <<= 8;
667 if (test_bit(i * 4 + 3, bitmask))
668 reg += 0x08;
670 spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
675 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
676 * @card: card structure
677 * @skb: packet to use
679 * returns 0 on success, <0 on failure.
681 * fills out the descriptor structure with skb data and len. Copies data,
682 * if needed (32bit DMA!)
684 static int
685 spider_net_prepare_tx_descr(struct spider_net_card *card,
686 struct sk_buff *skb)
688 struct spider_net_descr_chain *chain = &card->tx_chain;
689 struct spider_net_descr *descr;
690 struct spider_net_hw_descr *hwdescr;
691 dma_addr_t buf;
692 unsigned long flags;
694 buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
695 if (pci_dma_mapping_error(card->pdev, buf)) {
696 if (netif_msg_tx_err(card) && net_ratelimit())
697 dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
698 "Dropping packet\n", skb->data, skb->len);
699 card->spider_stats.tx_iommu_map_error++;
700 return -ENOMEM;
703 spin_lock_irqsave(&chain->lock, flags);
704 descr = card->tx_chain.head;
705 if (descr->next == chain->tail->prev) {
706 spin_unlock_irqrestore(&chain->lock, flags);
707 pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
708 return -ENOMEM;
710 hwdescr = descr->hwdescr;
711 chain->head = descr->next;
713 descr->skb = skb;
714 hwdescr->buf_addr = buf;
715 hwdescr->buf_size = skb->len;
716 hwdescr->next_descr_addr = 0;
717 hwdescr->data_status = 0;
719 hwdescr->dmac_cmd_status =
720 SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
721 spin_unlock_irqrestore(&chain->lock, flags);
723 if (skb->ip_summed == CHECKSUM_PARTIAL)
724 switch (ip_hdr(skb)->protocol) {
725 case IPPROTO_TCP:
726 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
727 break;
728 case IPPROTO_UDP:
729 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
730 break;
733 /* Chain the bus address, so that the DMA engine finds this descr. */
734 wmb();
735 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
737 card->netdev->trans_start = jiffies; /* set netdev watchdog timer */
738 return 0;
741 static int
742 spider_net_set_low_watermark(struct spider_net_card *card)
744 struct spider_net_descr *descr = card->tx_chain.tail;
745 struct spider_net_hw_descr *hwdescr;
746 unsigned long flags;
747 int status;
748 int cnt=0;
749 int i;
751 /* Measure the length of the queue. Measurement does not
752 * need to be precise -- does not need a lock. */
753 while (descr != card->tx_chain.head) {
754 status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
755 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
756 break;
757 descr = descr->next;
758 cnt++;
761 /* If TX queue is short, don't even bother with interrupts */
762 if (cnt < card->tx_chain.num_desc/4)
763 return cnt;
765 /* Set low-watermark 3/4th's of the way into the queue. */
766 descr = card->tx_chain.tail;
767 cnt = (cnt*3)/4;
768 for (i=0;i<cnt; i++)
769 descr = descr->next;
771 /* Set the new watermark, clear the old watermark */
772 spin_lock_irqsave(&card->tx_chain.lock, flags);
773 descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
774 if (card->low_watermark && card->low_watermark != descr) {
775 hwdescr = card->low_watermark->hwdescr;
776 hwdescr->dmac_cmd_status =
777 hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
779 card->low_watermark = descr;
780 spin_unlock_irqrestore(&card->tx_chain.lock, flags);
781 return cnt;
785 * spider_net_release_tx_chain - processes sent tx descriptors
786 * @card: adapter structure
787 * @brutal: if set, don't care about whether descriptor seems to be in use
789 * returns 0 if the tx ring is empty, otherwise 1.
791 * spider_net_release_tx_chain releases the tx descriptors that spider has
792 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
793 * If some other context is calling this function, we return 1 so that we're
794 * scheduled again (if we were scheduled) and will not lose initiative.
796 static int
797 spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
799 struct net_device *dev = card->netdev;
800 struct spider_net_descr_chain *chain = &card->tx_chain;
801 struct spider_net_descr *descr;
802 struct spider_net_hw_descr *hwdescr;
803 struct sk_buff *skb;
804 u32 buf_addr;
805 unsigned long flags;
806 int status;
808 while (1) {
809 spin_lock_irqsave(&chain->lock, flags);
810 if (chain->tail == chain->head) {
811 spin_unlock_irqrestore(&chain->lock, flags);
812 return 0;
814 descr = chain->tail;
815 hwdescr = descr->hwdescr;
817 status = spider_net_get_descr_status(hwdescr);
818 switch (status) {
819 case SPIDER_NET_DESCR_COMPLETE:
820 dev->stats.tx_packets++;
821 dev->stats.tx_bytes += descr->skb->len;
822 break;
824 case SPIDER_NET_DESCR_CARDOWNED:
825 if (!brutal) {
826 spin_unlock_irqrestore(&chain->lock, flags);
827 return 1;
830 /* fallthrough, if we release the descriptors
831 * brutally (then we don't care about
832 * SPIDER_NET_DESCR_CARDOWNED) */
834 case SPIDER_NET_DESCR_RESPONSE_ERROR:
835 case SPIDER_NET_DESCR_PROTECTION_ERROR:
836 case SPIDER_NET_DESCR_FORCE_END:
837 if (netif_msg_tx_err(card))
838 dev_err(&card->netdev->dev, "forcing end of tx descriptor "
839 "with status x%02x\n", status);
840 dev->stats.tx_errors++;
841 break;
843 default:
844 dev->stats.tx_dropped++;
845 if (!brutal) {
846 spin_unlock_irqrestore(&chain->lock, flags);
847 return 1;
851 chain->tail = descr->next;
852 hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
853 skb = descr->skb;
854 descr->skb = NULL;
855 buf_addr = hwdescr->buf_addr;
856 spin_unlock_irqrestore(&chain->lock, flags);
858 /* unmap the skb */
859 if (skb) {
860 pci_unmap_single(card->pdev, buf_addr, skb->len,
861 PCI_DMA_TODEVICE);
862 dev_kfree_skb(skb);
865 return 0;
869 * spider_net_kick_tx_dma - enables TX DMA processing
870 * @card: card structure
872 * This routine will start the transmit DMA running if
873 * it is not already running. This routine ned only be
874 * called when queueing a new packet to an empty tx queue.
875 * Writes the current tx chain head as start address
876 * of the tx descriptor chain and enables the transmission
877 * DMA engine.
879 static inline void
880 spider_net_kick_tx_dma(struct spider_net_card *card)
882 struct spider_net_descr *descr;
884 if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
885 SPIDER_NET_TX_DMA_EN)
886 goto out;
888 descr = card->tx_chain.tail;
889 for (;;) {
890 if (spider_net_get_descr_status(descr->hwdescr) ==
891 SPIDER_NET_DESCR_CARDOWNED) {
892 spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
893 descr->bus_addr);
894 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
895 SPIDER_NET_DMA_TX_VALUE);
896 break;
898 if (descr == card->tx_chain.head)
899 break;
900 descr = descr->next;
903 out:
904 mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
908 * spider_net_xmit - transmits a frame over the device
909 * @skb: packet to send out
910 * @netdev: interface device structure
912 * returns 0 on success, !0 on failure
914 static int
915 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
917 int cnt;
918 struct spider_net_card *card = netdev_priv(netdev);
920 spider_net_release_tx_chain(card, 0);
922 if (spider_net_prepare_tx_descr(card, skb) != 0) {
923 netdev->stats.tx_dropped++;
924 netif_stop_queue(netdev);
925 return NETDEV_TX_BUSY;
928 cnt = spider_net_set_low_watermark(card);
929 if (cnt < 5)
930 spider_net_kick_tx_dma(card);
931 return NETDEV_TX_OK;
935 * spider_net_cleanup_tx_ring - cleans up the TX ring
936 * @card: card structure
938 * spider_net_cleanup_tx_ring is called by either the tx_timer
939 * or from the NAPI polling routine.
940 * This routine releases resources associted with transmitted
941 * packets, including updating the queue tail pointer.
943 static void
944 spider_net_cleanup_tx_ring(struct spider_net_card *card)
946 if ((spider_net_release_tx_chain(card, 0) != 0) &&
947 (card->netdev->flags & IFF_UP)) {
948 spider_net_kick_tx_dma(card);
949 netif_wake_queue(card->netdev);
954 * spider_net_do_ioctl - called for device ioctls
955 * @netdev: interface device structure
956 * @ifr: request parameter structure for ioctl
957 * @cmd: command code for ioctl
959 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
960 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
962 static int
963 spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
965 switch (cmd) {
966 default:
967 return -EOPNOTSUPP;
972 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
973 * @descr: descriptor to process
974 * @card: card structure
976 * Fills out skb structure and passes the data to the stack.
977 * The descriptor state is not changed.
979 static void
980 spider_net_pass_skb_up(struct spider_net_descr *descr,
981 struct spider_net_card *card)
983 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
984 struct sk_buff *skb = descr->skb;
985 struct net_device *netdev = card->netdev;
986 u32 data_status = hwdescr->data_status;
987 u32 data_error = hwdescr->data_error;
989 skb_put(skb, hwdescr->valid_size);
991 /* the card seems to add 2 bytes of junk in front
992 * of the ethernet frame */
993 #define SPIDER_MISALIGN 2
994 skb_pull(skb, SPIDER_MISALIGN);
995 skb->protocol = eth_type_trans(skb, netdev);
997 /* checksum offload */
998 skb_checksum_none_assert(skb);
999 if (netdev->features & NETIF_F_RXCSUM) {
1000 if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
1001 SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
1002 !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
1003 skb->ip_summed = CHECKSUM_UNNECESSARY;
1006 if (data_status & SPIDER_NET_VLAN_PACKET) {
1007 /* further enhancements: HW-accel VLAN */
1010 /* update netdevice statistics */
1011 netdev->stats.rx_packets++;
1012 netdev->stats.rx_bytes += skb->len;
1014 /* pass skb up to stack */
1015 netif_receive_skb(skb);
1018 static void show_rx_chain(struct spider_net_card *card)
1020 struct spider_net_descr_chain *chain = &card->rx_chain;
1021 struct spider_net_descr *start= chain->tail;
1022 struct spider_net_descr *descr= start;
1023 struct spider_net_hw_descr *hwd = start->hwdescr;
1024 struct device *dev = &card->netdev->dev;
1025 u32 curr_desc, next_desc;
1026 int status;
1028 int tot = 0;
1029 int cnt = 0;
1030 int off = start - chain->ring;
1031 int cstat = hwd->dmac_cmd_status;
1033 dev_info(dev, "Total number of descrs=%d\n",
1034 chain->num_desc);
1035 dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
1036 off, cstat);
1038 curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
1039 next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
1041 status = cstat;
1044 hwd = descr->hwdescr;
1045 off = descr - chain->ring;
1046 status = hwd->dmac_cmd_status;
1048 if (descr == chain->head)
1049 dev_info(dev, "Chain head is at %d, head status=0x%x\n",
1050 off, status);
1052 if (curr_desc == descr->bus_addr)
1053 dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1054 off, status);
1056 if (next_desc == descr->bus_addr)
1057 dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1058 off, status);
1060 if (hwd->next_descr_addr == 0)
1061 dev_info(dev, "chain is cut at %d\n", off);
1063 if (cstat != status) {
1064 int from = (chain->num_desc + off - cnt) % chain->num_desc;
1065 int to = (chain->num_desc + off - 1) % chain->num_desc;
1066 dev_info(dev, "Have %d (from %d to %d) descrs "
1067 "with stat=0x%08x\n", cnt, from, to, cstat);
1068 cstat = status;
1069 cnt = 0;
1072 cnt ++;
1073 tot ++;
1074 descr = descr->next;
1075 } while (descr != start);
1077 dev_info(dev, "Last %d descrs with stat=0x%08x "
1078 "for a total of %d descrs\n", cnt, cstat, tot);
1080 #ifdef DEBUG
1081 /* Now dump the whole ring */
1082 descr = start;
1085 struct spider_net_hw_descr *hwd = descr->hwdescr;
1086 status = spider_net_get_descr_status(hwd);
1087 cnt = descr - chain->ring;
1088 dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
1089 cnt, status, descr->skb);
1090 dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
1091 descr->bus_addr, hwd->buf_addr, hwd->buf_size);
1092 dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
1093 hwd->next_descr_addr, hwd->result_size,
1094 hwd->valid_size);
1095 dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
1096 hwd->dmac_cmd_status, hwd->data_status,
1097 hwd->data_error);
1098 dev_info(dev, "\n");
1100 descr = descr->next;
1101 } while (descr != start);
1102 #endif
1107 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1109 * If the driver fails to keep up and empty the queue, then the
1110 * hardware wil run out of room to put incoming packets. This
1111 * will cause the hardware to skip descrs that are full (instead
1112 * of halting/retrying). Thus, once the driver runs, it wil need
1113 * to "catch up" to where the hardware chain pointer is at.
1115 static void spider_net_resync_head_ptr(struct spider_net_card *card)
1117 unsigned long flags;
1118 struct spider_net_descr_chain *chain = &card->rx_chain;
1119 struct spider_net_descr *descr;
1120 int i, status;
1122 /* Advance head pointer past any empty descrs */
1123 descr = chain->head;
1124 status = spider_net_get_descr_status(descr->hwdescr);
1126 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
1127 return;
1129 spin_lock_irqsave(&chain->lock, flags);
1131 descr = chain->head;
1132 status = spider_net_get_descr_status(descr->hwdescr);
1133 for (i=0; i<chain->num_desc; i++) {
1134 if (status != SPIDER_NET_DESCR_CARDOWNED) break;
1135 descr = descr->next;
1136 status = spider_net_get_descr_status(descr->hwdescr);
1138 chain->head = descr;
1140 spin_unlock_irqrestore(&chain->lock, flags);
1143 static int spider_net_resync_tail_ptr(struct spider_net_card *card)
1145 struct spider_net_descr_chain *chain = &card->rx_chain;
1146 struct spider_net_descr *descr;
1147 int i, status;
1149 /* Advance tail pointer past any empty and reaped descrs */
1150 descr = chain->tail;
1151 status = spider_net_get_descr_status(descr->hwdescr);
1153 for (i=0; i<chain->num_desc; i++) {
1154 if ((status != SPIDER_NET_DESCR_CARDOWNED) &&
1155 (status != SPIDER_NET_DESCR_NOT_IN_USE)) break;
1156 descr = descr->next;
1157 status = spider_net_get_descr_status(descr->hwdescr);
1159 chain->tail = descr;
1161 if ((i == chain->num_desc) || (i == 0))
1162 return 1;
1163 return 0;
1167 * spider_net_decode_one_descr - processes an RX descriptor
1168 * @card: card structure
1170 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1172 * Processes an RX descriptor by iommu-unmapping the data buffer
1173 * and passing the packet up to the stack. This function is called
1174 * in softirq context, e.g. either bottom half from interrupt or
1175 * NAPI polling context.
1177 static int
1178 spider_net_decode_one_descr(struct spider_net_card *card)
1180 struct net_device *dev = card->netdev;
1181 struct spider_net_descr_chain *chain = &card->rx_chain;
1182 struct spider_net_descr *descr = chain->tail;
1183 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
1184 u32 hw_buf_addr;
1185 int status;
1187 status = spider_net_get_descr_status(hwdescr);
1189 /* Nothing in the descriptor, or ring must be empty */
1190 if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
1191 (status == SPIDER_NET_DESCR_NOT_IN_USE))
1192 return 0;
1194 /* descriptor definitively used -- move on tail */
1195 chain->tail = descr->next;
1197 /* unmap descriptor */
1198 hw_buf_addr = hwdescr->buf_addr;
1199 hwdescr->buf_addr = 0xffffffff;
1200 pci_unmap_single(card->pdev, hw_buf_addr,
1201 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
1203 if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
1204 (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
1205 (status == SPIDER_NET_DESCR_FORCE_END) ) {
1206 if (netif_msg_rx_err(card))
1207 dev_err(&dev->dev,
1208 "dropping RX descriptor with state %d\n", status);
1209 dev->stats.rx_dropped++;
1210 goto bad_desc;
1213 if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
1214 (status != SPIDER_NET_DESCR_FRAME_END) ) {
1215 if (netif_msg_rx_err(card))
1216 dev_err(&card->netdev->dev,
1217 "RX descriptor with unknown state %d\n", status);
1218 card->spider_stats.rx_desc_unk_state++;
1219 goto bad_desc;
1222 /* The cases we'll throw away the packet immediately */
1223 if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
1224 if (netif_msg_rx_err(card))
1225 dev_err(&card->netdev->dev,
1226 "error in received descriptor found, "
1227 "data_status=x%08x, data_error=x%08x\n",
1228 hwdescr->data_status, hwdescr->data_error);
1229 goto bad_desc;
1232 if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
1233 dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
1234 hwdescr->dmac_cmd_status);
1235 pr_err("buf_addr=x%08x\n", hw_buf_addr);
1236 pr_err("buf_size=x%08x\n", hwdescr->buf_size);
1237 pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
1238 pr_err("result_size=x%08x\n", hwdescr->result_size);
1239 pr_err("valid_size=x%08x\n", hwdescr->valid_size);
1240 pr_err("data_status=x%08x\n", hwdescr->data_status);
1241 pr_err("data_error=x%08x\n", hwdescr->data_error);
1242 pr_err("which=%ld\n", descr - card->rx_chain.ring);
1244 card->spider_stats.rx_desc_error++;
1245 goto bad_desc;
1248 /* Ok, we've got a packet in descr */
1249 spider_net_pass_skb_up(descr, card);
1250 descr->skb = NULL;
1251 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1252 return 1;
1254 bad_desc:
1255 if (netif_msg_rx_err(card))
1256 show_rx_chain(card);
1257 dev_kfree_skb_irq(descr->skb);
1258 descr->skb = NULL;
1259 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1260 return 0;
1264 * spider_net_poll - NAPI poll function called by the stack to return packets
1265 * @netdev: interface device structure
1266 * @budget: number of packets we can pass to the stack at most
1268 * returns 0 if no more packets available to the driver/stack. Returns 1,
1269 * if the quota is exceeded, but the driver has still packets.
1271 * spider_net_poll returns all packets from the rx descriptors to the stack
1272 * (using netif_receive_skb). If all/enough packets are up, the driver
1273 * reenables interrupts and returns 0. If not, 1 is returned.
1275 static int spider_net_poll(struct napi_struct *napi, int budget)
1277 struct spider_net_card *card = container_of(napi, struct spider_net_card, napi);
1278 int packets_done = 0;
1280 while (packets_done < budget) {
1281 if (!spider_net_decode_one_descr(card))
1282 break;
1284 packets_done++;
1287 if ((packets_done == 0) && (card->num_rx_ints != 0)) {
1288 if (!spider_net_resync_tail_ptr(card))
1289 packets_done = budget;
1290 spider_net_resync_head_ptr(card);
1292 card->num_rx_ints = 0;
1294 spider_net_refill_rx_chain(card);
1295 spider_net_enable_rxdmac(card);
1297 spider_net_cleanup_tx_ring(card);
1299 /* if all packets are in the stack, enable interrupts and return 0 */
1300 /* if not, return 1 */
1301 if (packets_done < budget) {
1302 napi_complete(napi);
1303 spider_net_rx_irq_on(card);
1304 card->ignore_rx_ramfull = 0;
1307 return packets_done;
1311 * spider_net_change_mtu - changes the MTU of an interface
1312 * @netdev: interface device structure
1313 * @new_mtu: new MTU value
1315 * returns 0 on success, <0 on failure
1317 static int
1318 spider_net_change_mtu(struct net_device *netdev, int new_mtu)
1320 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1321 * and mtu is outbound only anyway */
1322 if ( (new_mtu < SPIDER_NET_MIN_MTU ) ||
1323 (new_mtu > SPIDER_NET_MAX_MTU) )
1324 return -EINVAL;
1325 netdev->mtu = new_mtu;
1326 return 0;
1330 * spider_net_set_mac - sets the MAC of an interface
1331 * @netdev: interface device structure
1332 * @ptr: pointer to new MAC address
1334 * Returns 0 on success, <0 on failure. Currently, we don't support this
1335 * and will always return EOPNOTSUPP.
1337 static int
1338 spider_net_set_mac(struct net_device *netdev, void *p)
1340 struct spider_net_card *card = netdev_priv(netdev);
1341 u32 macl, macu, regvalue;
1342 struct sockaddr *addr = p;
1344 if (!is_valid_ether_addr(addr->sa_data))
1345 return -EADDRNOTAVAIL;
1347 /* switch off GMACTPE and GMACRPE */
1348 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1349 regvalue &= ~((1 << 5) | (1 << 6));
1350 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1352 /* write mac */
1353 macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
1354 (addr->sa_data[2]<<8) + (addr->sa_data[3]);
1355 macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
1356 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
1357 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
1359 /* switch GMACTPE and GMACRPE back on */
1360 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1361 regvalue |= ((1 << 5) | (1 << 6));
1362 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1364 spider_net_set_promisc(card);
1366 /* look up, whether we have been successful */
1367 if (spider_net_get_mac_address(netdev))
1368 return -EADDRNOTAVAIL;
1369 if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len))
1370 return -EADDRNOTAVAIL;
1372 return 0;
1376 * spider_net_link_reset
1377 * @netdev: net device structure
1379 * This is called when the PHY_LINK signal is asserted. For the blade this is
1380 * not connected so we should never get here.
1383 static void
1384 spider_net_link_reset(struct net_device *netdev)
1387 struct spider_net_card *card = netdev_priv(netdev);
1389 del_timer_sync(&card->aneg_timer);
1391 /* clear interrupt, block further interrupts */
1392 spider_net_write_reg(card, SPIDER_NET_GMACST,
1393 spider_net_read_reg(card, SPIDER_NET_GMACST));
1394 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1396 /* reset phy and setup aneg */
1397 card->aneg_count = 0;
1398 card->medium = BCM54XX_COPPER;
1399 spider_net_setup_aneg(card);
1400 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1405 * spider_net_handle_error_irq - handles errors raised by an interrupt
1406 * @card: card structure
1407 * @status_reg: interrupt status register 0 (GHIINT0STS)
1409 * spider_net_handle_error_irq treats or ignores all error conditions
1410 * found when an interrupt is presented
1412 static void
1413 spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
1414 u32 error_reg1, u32 error_reg2)
1416 u32 i;
1417 int show_error = 1;
1419 /* check GHIINT0STS ************************************/
1420 if (status_reg)
1421 for (i = 0; i < 32; i++)
1422 if (status_reg & (1<<i))
1423 switch (i)
1425 /* let error_reg1 and error_reg2 evaluation decide, what to do
1426 case SPIDER_NET_PHYINT:
1427 case SPIDER_NET_GMAC2INT:
1428 case SPIDER_NET_GMAC1INT:
1429 case SPIDER_NET_GFIFOINT:
1430 case SPIDER_NET_DMACINT:
1431 case SPIDER_NET_GSYSINT:
1432 break; */
1434 case SPIDER_NET_GIPSINT:
1435 show_error = 0;
1436 break;
1438 case SPIDER_NET_GPWOPCMPINT:
1439 /* PHY write operation completed */
1440 show_error = 0;
1441 break;
1442 case SPIDER_NET_GPROPCMPINT:
1443 /* PHY read operation completed */
1444 /* we don't use semaphores, as we poll for the completion
1445 * of the read operation in spider_net_read_phy. Should take
1446 * about 50 us */
1447 show_error = 0;
1448 break;
1449 case SPIDER_NET_GPWFFINT:
1450 /* PHY command queue full */
1451 if (netif_msg_intr(card))
1452 dev_err(&card->netdev->dev, "PHY write queue full\n");
1453 show_error = 0;
1454 break;
1456 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1457 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1458 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1460 case SPIDER_NET_GDTDEN0INT:
1461 /* someone has set TX_DMA_EN to 0 */
1462 show_error = 0;
1463 break;
1465 case SPIDER_NET_GDDDEN0INT: /* fallthrough */
1466 case SPIDER_NET_GDCDEN0INT: /* fallthrough */
1467 case SPIDER_NET_GDBDEN0INT: /* fallthrough */
1468 case SPIDER_NET_GDADEN0INT:
1469 /* someone has set RX_DMA_EN to 0 */
1470 show_error = 0;
1471 break;
1473 /* RX interrupts */
1474 case SPIDER_NET_GDDFDCINT:
1475 case SPIDER_NET_GDCFDCINT:
1476 case SPIDER_NET_GDBFDCINT:
1477 case SPIDER_NET_GDAFDCINT:
1478 /* case SPIDER_NET_GDNMINT: not used. print a message */
1479 /* case SPIDER_NET_GCNMINT: not used. print a message */
1480 /* case SPIDER_NET_GBNMINT: not used. print a message */
1481 /* case SPIDER_NET_GANMINT: not used. print a message */
1482 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1483 show_error = 0;
1484 break;
1486 /* TX interrupts */
1487 case SPIDER_NET_GDTFDCINT:
1488 show_error = 0;
1489 break;
1490 case SPIDER_NET_GTTEDINT:
1491 show_error = 0;
1492 break;
1493 case SPIDER_NET_GDTDCEINT:
1494 /* chain end. If a descriptor should be sent, kick off
1495 * tx dma
1496 if (card->tx_chain.tail != card->tx_chain.head)
1497 spider_net_kick_tx_dma(card);
1499 show_error = 0;
1500 break;
1502 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1503 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1506 /* check GHIINT1STS ************************************/
1507 if (error_reg1)
1508 for (i = 0; i < 32; i++)
1509 if (error_reg1 & (1<<i))
1510 switch (i)
1512 case SPIDER_NET_GTMFLLINT:
1513 /* TX RAM full may happen on a usual case.
1514 * Logging is not needed. */
1515 show_error = 0;
1516 break;
1517 case SPIDER_NET_GRFDFLLINT: /* fallthrough */
1518 case SPIDER_NET_GRFCFLLINT: /* fallthrough */
1519 case SPIDER_NET_GRFBFLLINT: /* fallthrough */
1520 case SPIDER_NET_GRFAFLLINT: /* fallthrough */
1521 case SPIDER_NET_GRMFLLINT:
1522 /* Could happen when rx chain is full */
1523 if (card->ignore_rx_ramfull == 0) {
1524 card->ignore_rx_ramfull = 1;
1525 spider_net_resync_head_ptr(card);
1526 spider_net_refill_rx_chain(card);
1527 spider_net_enable_rxdmac(card);
1528 card->num_rx_ints ++;
1529 napi_schedule(&card->napi);
1531 show_error = 0;
1532 break;
1534 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1535 case SPIDER_NET_GDTINVDINT:
1536 /* allrighty. tx from previous descr ok */
1537 show_error = 0;
1538 break;
1540 /* chain end */
1541 case SPIDER_NET_GDDDCEINT: /* fallthrough */
1542 case SPIDER_NET_GDCDCEINT: /* fallthrough */
1543 case SPIDER_NET_GDBDCEINT: /* fallthrough */
1544 case SPIDER_NET_GDADCEINT:
1545 spider_net_resync_head_ptr(card);
1546 spider_net_refill_rx_chain(card);
1547 spider_net_enable_rxdmac(card);
1548 card->num_rx_ints ++;
1549 napi_schedule(&card->napi);
1550 show_error = 0;
1551 break;
1553 /* invalid descriptor */
1554 case SPIDER_NET_GDDINVDINT: /* fallthrough */
1555 case SPIDER_NET_GDCINVDINT: /* fallthrough */
1556 case SPIDER_NET_GDBINVDINT: /* fallthrough */
1557 case SPIDER_NET_GDAINVDINT:
1558 /* Could happen when rx chain is full */
1559 spider_net_resync_head_ptr(card);
1560 spider_net_refill_rx_chain(card);
1561 spider_net_enable_rxdmac(card);
1562 card->num_rx_ints ++;
1563 napi_schedule(&card->napi);
1564 show_error = 0;
1565 break;
1567 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1568 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1569 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1570 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1571 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1572 /* case SPIDER_NET_GDSERINT: problem, print a message */
1573 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1574 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1575 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1576 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1577 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1578 default:
1579 show_error = 1;
1580 break;
1583 /* check GHIINT2STS ************************************/
1584 if (error_reg2)
1585 for (i = 0; i < 32; i++)
1586 if (error_reg2 & (1<<i))
1587 switch (i)
1589 /* there is nothing we can (want to) do at this time. Log a
1590 * message, we can switch on and off the specific values later on
1591 case SPIDER_NET_GPROPERINT:
1592 case SPIDER_NET_GMCTCRSNGINT:
1593 case SPIDER_NET_GMCTLCOLINT:
1594 case SPIDER_NET_GMCTTMOTINT:
1595 case SPIDER_NET_GMCRCAERINT:
1596 case SPIDER_NET_GMCRCALERINT:
1597 case SPIDER_NET_GMCRALNERINT:
1598 case SPIDER_NET_GMCROVRINT:
1599 case SPIDER_NET_GMCRRNTINT:
1600 case SPIDER_NET_GMCRRXERINT:
1601 case SPIDER_NET_GTITCSERINT:
1602 case SPIDER_NET_GTIFMTERINT:
1603 case SPIDER_NET_GTIPKTRVKINT:
1604 case SPIDER_NET_GTISPINGINT:
1605 case SPIDER_NET_GTISADNGINT:
1606 case SPIDER_NET_GTISPDNGINT:
1607 case SPIDER_NET_GRIFMTERINT:
1608 case SPIDER_NET_GRIPKTRVKINT:
1609 case SPIDER_NET_GRISPINGINT:
1610 case SPIDER_NET_GRISADNGINT:
1611 case SPIDER_NET_GRISPDNGINT:
1612 break;
1614 default:
1615 break;
1618 if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
1619 dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
1620 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1621 status_reg, error_reg1, error_reg2);
1623 /* clear interrupt sources */
1624 spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
1625 spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
1629 * spider_net_interrupt - interrupt handler for spider_net
1630 * @irq: interrupt number
1631 * @ptr: pointer to net_device
1633 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1634 * interrupt found raised by card.
1636 * This is the interrupt handler, that turns off
1637 * interrupts for this device and makes the stack poll the driver
1639 static irqreturn_t
1640 spider_net_interrupt(int irq, void *ptr)
1642 struct net_device *netdev = ptr;
1643 struct spider_net_card *card = netdev_priv(netdev);
1644 u32 status_reg, error_reg1, error_reg2;
1646 status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
1647 error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
1648 error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
1650 if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) &&
1651 !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) &&
1652 !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE))
1653 return IRQ_NONE;
1655 if (status_reg & SPIDER_NET_RXINT ) {
1656 spider_net_rx_irq_off(card);
1657 napi_schedule(&card->napi);
1658 card->num_rx_ints ++;
1660 if (status_reg & SPIDER_NET_TXINT)
1661 napi_schedule(&card->napi);
1663 if (status_reg & SPIDER_NET_LINKINT)
1664 spider_net_link_reset(netdev);
1666 if (status_reg & SPIDER_NET_ERRINT )
1667 spider_net_handle_error_irq(card, status_reg,
1668 error_reg1, error_reg2);
1670 /* clear interrupt sources */
1671 spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
1673 return IRQ_HANDLED;
1676 #ifdef CONFIG_NET_POLL_CONTROLLER
1678 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1679 * @netdev: interface device structure
1681 * see Documentation/networking/netconsole.txt
1683 static void
1684 spider_net_poll_controller(struct net_device *netdev)
1686 disable_irq(netdev->irq);
1687 spider_net_interrupt(netdev->irq, netdev);
1688 enable_irq(netdev->irq);
1690 #endif /* CONFIG_NET_POLL_CONTROLLER */
1693 * spider_net_enable_interrupts - enable interrupts
1694 * @card: card structure
1696 * spider_net_enable_interrupt enables several interrupts
1698 static void
1699 spider_net_enable_interrupts(struct spider_net_card *card)
1701 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
1702 SPIDER_NET_INT0_MASK_VALUE);
1703 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
1704 SPIDER_NET_INT1_MASK_VALUE);
1705 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
1706 SPIDER_NET_INT2_MASK_VALUE);
1710 * spider_net_disable_interrupts - disable interrupts
1711 * @card: card structure
1713 * spider_net_disable_interrupts disables all the interrupts
1715 static void
1716 spider_net_disable_interrupts(struct spider_net_card *card)
1718 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
1719 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
1720 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
1721 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1725 * spider_net_init_card - initializes the card
1726 * @card: card structure
1728 * spider_net_init_card initializes the card so that other registers can
1729 * be used
1731 static void
1732 spider_net_init_card(struct spider_net_card *card)
1734 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1735 SPIDER_NET_CKRCTRL_STOP_VALUE);
1737 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1738 SPIDER_NET_CKRCTRL_RUN_VALUE);
1740 /* trigger ETOMOD signal */
1741 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1742 spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
1744 spider_net_disable_interrupts(card);
1748 * spider_net_enable_card - enables the card by setting all kinds of regs
1749 * @card: card structure
1751 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1753 static void
1754 spider_net_enable_card(struct spider_net_card *card)
1756 int i;
1757 /* the following array consists of (register),(value) pairs
1758 * that are set in this function. A register of 0 ends the list */
1759 u32 regs[][2] = {
1760 { SPIDER_NET_GRESUMINTNUM, 0 },
1761 { SPIDER_NET_GREINTNUM, 0 },
1763 /* set interrupt frame number registers */
1764 /* clear the single DMA engine registers first */
1765 { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1766 { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1767 { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1768 { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1769 /* then set, what we really need */
1770 { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
1772 /* timer counter registers and stuff */
1773 { SPIDER_NET_GFREECNNUM, 0 },
1774 { SPIDER_NET_GONETIMENUM, 0 },
1775 { SPIDER_NET_GTOUTFRMNUM, 0 },
1777 /* RX mode setting */
1778 { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
1779 /* TX mode setting */
1780 { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
1781 /* IPSEC mode setting */
1782 { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
1784 { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
1786 { SPIDER_NET_GMRWOLCTRL, 0 },
1787 { SPIDER_NET_GTESTMD, 0x10000000 },
1788 { SPIDER_NET_GTTQMSK, 0x00400040 },
1790 { SPIDER_NET_GMACINTEN, 0 },
1792 /* flow control stuff */
1793 { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
1794 { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
1796 { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
1797 { 0, 0}
1800 i = 0;
1801 while (regs[i][0]) {
1802 spider_net_write_reg(card, regs[i][0], regs[i][1]);
1803 i++;
1806 /* clear unicast filter table entries 1 to 14 */
1807 for (i = 1; i <= 14; i++) {
1808 spider_net_write_reg(card,
1809 SPIDER_NET_GMRUAFILnR + i * 8,
1810 0x00080000);
1811 spider_net_write_reg(card,
1812 SPIDER_NET_GMRUAFILnR + i * 8 + 4,
1813 0x00000000);
1816 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
1818 spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
1820 /* set chain tail address for RX chains and
1821 * enable DMA */
1822 spider_net_enable_rxchtails(card);
1823 spider_net_enable_rxdmac(card);
1825 spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
1827 spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
1828 SPIDER_NET_LENLMT_VALUE);
1829 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1830 SPIDER_NET_OPMODE_VALUE);
1832 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
1833 SPIDER_NET_GDTBSTA);
1837 * spider_net_download_firmware - loads firmware into the adapter
1838 * @card: card structure
1839 * @firmware_ptr: pointer to firmware data
1841 * spider_net_download_firmware loads the firmware data into the
1842 * adapter. It assumes the length etc. to be allright.
1844 static int
1845 spider_net_download_firmware(struct spider_net_card *card,
1846 const void *firmware_ptr)
1848 int sequencer, i;
1849 const u32 *fw_ptr = firmware_ptr;
1851 /* stop sequencers */
1852 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1853 SPIDER_NET_STOP_SEQ_VALUE);
1855 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
1856 sequencer++) {
1857 spider_net_write_reg(card,
1858 SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
1859 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
1860 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
1861 sequencer * 8, *fw_ptr);
1862 fw_ptr++;
1866 if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
1867 return -EIO;
1869 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1870 SPIDER_NET_RUN_SEQ_VALUE);
1872 return 0;
1876 * spider_net_init_firmware - reads in firmware parts
1877 * @card: card structure
1879 * Returns 0 on success, <0 on failure
1881 * spider_net_init_firmware opens the sequencer firmware and does some basic
1882 * checks. This function opens and releases the firmware structure. A call
1883 * to download the firmware is performed before the release.
1885 * Firmware format
1886 * ===============
1887 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1888 * the program for each sequencer. Use the command
1889 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1890 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1891 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1893 * to generate spider_fw.bin, if you have sequencer programs with something
1894 * like the following contents for each sequencer:
1895 * <ONE LINE COMMENT>
1896 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1897 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1898 * ...
1899 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1901 static int
1902 spider_net_init_firmware(struct spider_net_card *card)
1904 struct firmware *firmware = NULL;
1905 struct device_node *dn;
1906 const u8 *fw_prop = NULL;
1907 int err = -ENOENT;
1908 int fw_size;
1910 if (request_firmware((const struct firmware **)&firmware,
1911 SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
1912 if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
1913 netif_msg_probe(card) ) {
1914 dev_err(&card->netdev->dev,
1915 "Incorrect size of spidernet firmware in " \
1916 "filesystem. Looking in host firmware...\n");
1917 goto try_host_fw;
1919 err = spider_net_download_firmware(card, firmware->data);
1921 release_firmware(firmware);
1922 if (err)
1923 goto try_host_fw;
1925 goto done;
1928 try_host_fw:
1929 dn = pci_device_to_OF_node(card->pdev);
1930 if (!dn)
1931 goto out_err;
1933 fw_prop = of_get_property(dn, "firmware", &fw_size);
1934 if (!fw_prop)
1935 goto out_err;
1937 if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
1938 netif_msg_probe(card) ) {
1939 dev_err(&card->netdev->dev,
1940 "Incorrect size of spidernet firmware in host firmware\n");
1941 goto done;
1944 err = spider_net_download_firmware(card, fw_prop);
1946 done:
1947 return err;
1948 out_err:
1949 if (netif_msg_probe(card))
1950 dev_err(&card->netdev->dev,
1951 "Couldn't find spidernet firmware in filesystem " \
1952 "or host firmware\n");
1953 return err;
1957 * spider_net_open - called upon ifonfig up
1958 * @netdev: interface device structure
1960 * returns 0 on success, <0 on failure
1962 * spider_net_open allocates all the descriptors and memory needed for
1963 * operation, sets up multicast list and enables interrupts
1966 spider_net_open(struct net_device *netdev)
1968 struct spider_net_card *card = netdev_priv(netdev);
1969 int result;
1971 result = spider_net_init_firmware(card);
1972 if (result)
1973 goto init_firmware_failed;
1975 /* start probing with copper */
1976 card->aneg_count = 0;
1977 card->medium = BCM54XX_COPPER;
1978 spider_net_setup_aneg(card);
1979 if (card->phy.def->phy_id)
1980 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1982 result = spider_net_init_chain(card, &card->tx_chain);
1983 if (result)
1984 goto alloc_tx_failed;
1985 card->low_watermark = NULL;
1987 result = spider_net_init_chain(card, &card->rx_chain);
1988 if (result)
1989 goto alloc_rx_failed;
1991 /* Allocate rx skbs */
1992 if (spider_net_alloc_rx_skbs(card))
1993 goto alloc_skbs_failed;
1995 spider_net_set_multi(netdev);
1997 /* further enhancement: setup hw vlan, if needed */
1999 result = -EBUSY;
2000 if (request_irq(netdev->irq, spider_net_interrupt,
2001 IRQF_SHARED, netdev->name, netdev))
2002 goto register_int_failed;
2004 spider_net_enable_card(card);
2006 netif_start_queue(netdev);
2007 netif_carrier_on(netdev);
2008 napi_enable(&card->napi);
2010 spider_net_enable_interrupts(card);
2012 return 0;
2014 register_int_failed:
2015 spider_net_free_rx_chain_contents(card);
2016 alloc_skbs_failed:
2017 spider_net_free_chain(card, &card->rx_chain);
2018 alloc_rx_failed:
2019 spider_net_free_chain(card, &card->tx_chain);
2020 alloc_tx_failed:
2021 del_timer_sync(&card->aneg_timer);
2022 init_firmware_failed:
2023 return result;
2027 * spider_net_link_phy
2028 * @data: used for pointer to card structure
2031 static void spider_net_link_phy(unsigned long data)
2033 struct spider_net_card *card = (struct spider_net_card *)data;
2034 struct mii_phy *phy = &card->phy;
2036 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2037 if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
2039 pr_debug("%s: link is down trying to bring it up\n",
2040 card->netdev->name);
2042 switch (card->medium) {
2043 case BCM54XX_COPPER:
2044 /* enable fiber with autonegotiation first */
2045 if (phy->def->ops->enable_fiber)
2046 phy->def->ops->enable_fiber(phy, 1);
2047 card->medium = BCM54XX_FIBER;
2048 break;
2050 case BCM54XX_FIBER:
2051 /* fiber didn't come up, try to disable fiber autoneg */
2052 if (phy->def->ops->enable_fiber)
2053 phy->def->ops->enable_fiber(phy, 0);
2054 card->medium = BCM54XX_UNKNOWN;
2055 break;
2057 case BCM54XX_UNKNOWN:
2058 /* copper, fiber with and without failed,
2059 * retry from beginning */
2060 spider_net_setup_aneg(card);
2061 card->medium = BCM54XX_COPPER;
2062 break;
2065 card->aneg_count = 0;
2066 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2067 return;
2070 /* link still not up, try again later */
2071 if (!(phy->def->ops->poll_link(phy))) {
2072 card->aneg_count++;
2073 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2074 return;
2077 /* link came up, get abilities */
2078 phy->def->ops->read_link(phy);
2080 spider_net_write_reg(card, SPIDER_NET_GMACST,
2081 spider_net_read_reg(card, SPIDER_NET_GMACST));
2082 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
2084 if (phy->speed == 1000)
2085 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
2086 else
2087 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
2089 card->aneg_count = 0;
2091 pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2092 card->netdev->name, phy->speed,
2093 phy->duplex == 1 ? "Full" : "Half",
2094 phy->autoneg == 1 ? "" : "no ");
2098 * spider_net_setup_phy - setup PHY
2099 * @card: card structure
2101 * returns 0 on success, <0 on failure
2103 * spider_net_setup_phy is used as part of spider_net_probe.
2105 static int
2106 spider_net_setup_phy(struct spider_net_card *card)
2108 struct mii_phy *phy = &card->phy;
2110 spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
2111 SPIDER_NET_DMASEL_VALUE);
2112 spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
2113 SPIDER_NET_PHY_CTRL_VALUE);
2115 phy->dev = card->netdev;
2116 phy->mdio_read = spider_net_read_phy;
2117 phy->mdio_write = spider_net_write_phy;
2119 for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
2120 unsigned short id;
2121 id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
2122 if (id != 0x0000 && id != 0xffff) {
2123 if (!mii_phy_probe(phy, phy->mii_id)) {
2124 pr_info("Found %s.\n", phy->def->name);
2125 break;
2130 return 0;
2134 * spider_net_workaround_rxramfull - work around firmware bug
2135 * @card: card structure
2137 * no return value
2139 static void
2140 spider_net_workaround_rxramfull(struct spider_net_card *card)
2142 int i, sequencer = 0;
2144 /* cancel reset */
2145 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2146 SPIDER_NET_CKRCTRL_RUN_VALUE);
2148 /* empty sequencer data */
2149 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
2150 sequencer++) {
2151 spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
2152 sequencer * 8, 0x0);
2153 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
2154 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
2155 sequencer * 8, 0x0);
2159 /* set sequencer operation */
2160 spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
2162 /* reset */
2163 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2164 SPIDER_NET_CKRCTRL_STOP_VALUE);
2168 * spider_net_stop - called upon ifconfig down
2169 * @netdev: interface device structure
2171 * always returns 0
2174 spider_net_stop(struct net_device *netdev)
2176 struct spider_net_card *card = netdev_priv(netdev);
2178 napi_disable(&card->napi);
2179 netif_carrier_off(netdev);
2180 netif_stop_queue(netdev);
2181 del_timer_sync(&card->tx_timer);
2182 del_timer_sync(&card->aneg_timer);
2184 spider_net_disable_interrupts(card);
2186 free_irq(netdev->irq, netdev);
2188 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
2189 SPIDER_NET_DMA_TX_FEND_VALUE);
2191 /* turn off DMA, force end */
2192 spider_net_disable_rxdmac(card);
2194 /* release chains */
2195 spider_net_release_tx_chain(card, 1);
2196 spider_net_free_rx_chain_contents(card);
2198 spider_net_free_chain(card, &card->tx_chain);
2199 spider_net_free_chain(card, &card->rx_chain);
2201 return 0;
2205 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2206 * function (to be called not under interrupt status)
2207 * @data: data, is interface device structure
2209 * called as task when tx hangs, resets interface (if interface is up)
2211 static void
2212 spider_net_tx_timeout_task(struct work_struct *work)
2214 struct spider_net_card *card =
2215 container_of(work, struct spider_net_card, tx_timeout_task);
2216 struct net_device *netdev = card->netdev;
2218 if (!(netdev->flags & IFF_UP))
2219 goto out;
2221 netif_device_detach(netdev);
2222 spider_net_stop(netdev);
2224 spider_net_workaround_rxramfull(card);
2225 spider_net_init_card(card);
2227 if (spider_net_setup_phy(card))
2228 goto out;
2230 spider_net_open(netdev);
2231 spider_net_kick_tx_dma(card);
2232 netif_device_attach(netdev);
2234 out:
2235 atomic_dec(&card->tx_timeout_task_counter);
2239 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2240 * @netdev: interface device structure
2242 * called, if tx hangs. Schedules a task that resets the interface
2244 static void
2245 spider_net_tx_timeout(struct net_device *netdev)
2247 struct spider_net_card *card;
2249 card = netdev_priv(netdev);
2250 atomic_inc(&card->tx_timeout_task_counter);
2251 if (netdev->flags & IFF_UP)
2252 schedule_work(&card->tx_timeout_task);
2253 else
2254 atomic_dec(&card->tx_timeout_task_counter);
2255 card->spider_stats.tx_timeouts++;
2258 static const struct net_device_ops spider_net_ops = {
2259 .ndo_open = spider_net_open,
2260 .ndo_stop = spider_net_stop,
2261 .ndo_start_xmit = spider_net_xmit,
2262 .ndo_set_multicast_list = spider_net_set_multi,
2263 .ndo_set_mac_address = spider_net_set_mac,
2264 .ndo_change_mtu = spider_net_change_mtu,
2265 .ndo_do_ioctl = spider_net_do_ioctl,
2266 .ndo_tx_timeout = spider_net_tx_timeout,
2267 .ndo_validate_addr = eth_validate_addr,
2268 /* HW VLAN */
2269 #ifdef CONFIG_NET_POLL_CONTROLLER
2270 /* poll controller */
2271 .ndo_poll_controller = spider_net_poll_controller,
2272 #endif /* CONFIG_NET_POLL_CONTROLLER */
2276 * spider_net_setup_netdev_ops - initialization of net_device operations
2277 * @netdev: net_device structure
2279 * fills out function pointers in the net_device structure
2281 static void
2282 spider_net_setup_netdev_ops(struct net_device *netdev)
2284 netdev->netdev_ops = &spider_net_ops;
2285 netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
2286 /* ethtool ops */
2287 netdev->ethtool_ops = &spider_net_ethtool_ops;
2291 * spider_net_setup_netdev - initialization of net_device
2292 * @card: card structure
2294 * Returns 0 on success or <0 on failure
2296 * spider_net_setup_netdev initializes the net_device structure
2298 static int
2299 spider_net_setup_netdev(struct spider_net_card *card)
2301 int result;
2302 struct net_device *netdev = card->netdev;
2303 struct device_node *dn;
2304 struct sockaddr addr;
2305 const u8 *mac;
2307 SET_NETDEV_DEV(netdev, &card->pdev->dev);
2309 pci_set_drvdata(card->pdev, netdev);
2311 init_timer(&card->tx_timer);
2312 card->tx_timer.function =
2313 (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
2314 card->tx_timer.data = (unsigned long) card;
2315 netdev->irq = card->pdev->irq;
2317 card->aneg_count = 0;
2318 init_timer(&card->aneg_timer);
2319 card->aneg_timer.function = spider_net_link_phy;
2320 card->aneg_timer.data = (unsigned long) card;
2322 netif_napi_add(netdev, &card->napi,
2323 spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
2325 spider_net_setup_netdev_ops(netdev);
2327 netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
2328 if (SPIDER_NET_RX_CSUM_DEFAULT)
2329 netdev->features |= NETIF_F_RXCSUM;
2330 netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
2331 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2332 * NETIF_F_HW_VLAN_FILTER */
2334 netdev->irq = card->pdev->irq;
2335 card->num_rx_ints = 0;
2336 card->ignore_rx_ramfull = 0;
2338 dn = pci_device_to_OF_node(card->pdev);
2339 if (!dn)
2340 return -EIO;
2342 mac = of_get_property(dn, "local-mac-address", NULL);
2343 if (!mac)
2344 return -EIO;
2345 memcpy(addr.sa_data, mac, ETH_ALEN);
2347 result = spider_net_set_mac(netdev, &addr);
2348 if ((result) && (netif_msg_probe(card)))
2349 dev_err(&card->netdev->dev,
2350 "Failed to set MAC address: %i\n", result);
2352 result = register_netdev(netdev);
2353 if (result) {
2354 if (netif_msg_probe(card))
2355 dev_err(&card->netdev->dev,
2356 "Couldn't register net_device: %i\n", result);
2357 return result;
2360 if (netif_msg_probe(card))
2361 pr_info("Initialized device %s.\n", netdev->name);
2363 return 0;
2367 * spider_net_alloc_card - allocates net_device and card structure
2369 * returns the card structure or NULL in case of errors
2371 * the card and net_device structures are linked to each other
2373 static struct spider_net_card *
2374 spider_net_alloc_card(void)
2376 struct net_device *netdev;
2377 struct spider_net_card *card;
2378 size_t alloc_size;
2380 alloc_size = sizeof(struct spider_net_card) +
2381 (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
2382 netdev = alloc_etherdev(alloc_size);
2383 if (!netdev)
2384 return NULL;
2386 card = netdev_priv(netdev);
2387 card->netdev = netdev;
2388 card->msg_enable = SPIDER_NET_DEFAULT_MSG;
2389 INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
2390 init_waitqueue_head(&card->waitq);
2391 atomic_set(&card->tx_timeout_task_counter, 0);
2393 card->rx_chain.num_desc = rx_descriptors;
2394 card->rx_chain.ring = card->darray;
2395 card->tx_chain.num_desc = tx_descriptors;
2396 card->tx_chain.ring = card->darray + rx_descriptors;
2398 return card;
2402 * spider_net_undo_pci_setup - releases PCI ressources
2403 * @card: card structure
2405 * spider_net_undo_pci_setup releases the mapped regions
2407 static void
2408 spider_net_undo_pci_setup(struct spider_net_card *card)
2410 iounmap(card->regs);
2411 pci_release_regions(card->pdev);
2415 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2416 * @pdev: PCI device
2418 * Returns the card structure or NULL if any errors occur
2420 * spider_net_setup_pci_dev initializes pdev and together with the
2421 * functions called in spider_net_open configures the device so that
2422 * data can be transferred over it
2423 * The net_device structure is attached to the card structure, if the
2424 * function returns without error.
2426 static struct spider_net_card *
2427 spider_net_setup_pci_dev(struct pci_dev *pdev)
2429 struct spider_net_card *card;
2430 unsigned long mmio_start, mmio_len;
2432 if (pci_enable_device(pdev)) {
2433 dev_err(&pdev->dev, "Couldn't enable PCI device\n");
2434 return NULL;
2437 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2438 dev_err(&pdev->dev,
2439 "Couldn't find proper PCI device base address.\n");
2440 goto out_disable_dev;
2443 if (pci_request_regions(pdev, spider_net_driver_name)) {
2444 dev_err(&pdev->dev,
2445 "Couldn't obtain PCI resources, aborting.\n");
2446 goto out_disable_dev;
2449 pci_set_master(pdev);
2451 card = spider_net_alloc_card();
2452 if (!card) {
2453 dev_err(&pdev->dev,
2454 "Couldn't allocate net_device structure, aborting.\n");
2455 goto out_release_regions;
2457 card->pdev = pdev;
2459 /* fetch base address and length of first resource */
2460 mmio_start = pci_resource_start(pdev, 0);
2461 mmio_len = pci_resource_len(pdev, 0);
2463 card->netdev->mem_start = mmio_start;
2464 card->netdev->mem_end = mmio_start + mmio_len;
2465 card->regs = ioremap(mmio_start, mmio_len);
2467 if (!card->regs) {
2468 dev_err(&pdev->dev,
2469 "Couldn't obtain PCI resources, aborting.\n");
2470 goto out_release_regions;
2473 return card;
2475 out_release_regions:
2476 pci_release_regions(pdev);
2477 out_disable_dev:
2478 pci_disable_device(pdev);
2479 pci_set_drvdata(pdev, NULL);
2480 return NULL;
2484 * spider_net_probe - initialization of a device
2485 * @pdev: PCI device
2486 * @ent: entry in the device id list
2488 * Returns 0 on success, <0 on failure
2490 * spider_net_probe initializes pdev and registers a net_device
2491 * structure for it. After that, the device can be ifconfig'ed up
2493 static int __devinit
2494 spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2496 int err = -EIO;
2497 struct spider_net_card *card;
2499 card = spider_net_setup_pci_dev(pdev);
2500 if (!card)
2501 goto out;
2503 spider_net_workaround_rxramfull(card);
2504 spider_net_init_card(card);
2506 err = spider_net_setup_phy(card);
2507 if (err)
2508 goto out_undo_pci;
2510 err = spider_net_setup_netdev(card);
2511 if (err)
2512 goto out_undo_pci;
2514 return 0;
2516 out_undo_pci:
2517 spider_net_undo_pci_setup(card);
2518 free_netdev(card->netdev);
2519 out:
2520 return err;
2524 * spider_net_remove - removal of a device
2525 * @pdev: PCI device
2527 * Returns 0 on success, <0 on failure
2529 * spider_net_remove is called to remove the device and unregisters the
2530 * net_device
2532 static void __devexit
2533 spider_net_remove(struct pci_dev *pdev)
2535 struct net_device *netdev;
2536 struct spider_net_card *card;
2538 netdev = pci_get_drvdata(pdev);
2539 card = netdev_priv(netdev);
2541 wait_event(card->waitq,
2542 atomic_read(&card->tx_timeout_task_counter) == 0);
2544 unregister_netdev(netdev);
2546 /* switch off card */
2547 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2548 SPIDER_NET_CKRCTRL_STOP_VALUE);
2549 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2550 SPIDER_NET_CKRCTRL_RUN_VALUE);
2552 spider_net_undo_pci_setup(card);
2553 free_netdev(netdev);
2556 static struct pci_driver spider_net_driver = {
2557 .name = spider_net_driver_name,
2558 .id_table = spider_net_pci_tbl,
2559 .probe = spider_net_probe,
2560 .remove = __devexit_p(spider_net_remove)
2564 * spider_net_init - init function when the driver is loaded
2566 * spider_net_init registers the device driver
2568 static int __init spider_net_init(void)
2570 printk(KERN_INFO "Spidernet version %s.\n", VERSION);
2572 if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
2573 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
2574 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2576 if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
2577 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
2578 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2580 if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
2581 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
2582 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2584 if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
2585 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
2586 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2589 return pci_register_driver(&spider_net_driver);
2593 * spider_net_cleanup - exit function when driver is unloaded
2595 * spider_net_cleanup unregisters the device driver
2597 static void __exit spider_net_cleanup(void)
2599 pci_unregister_driver(&spider_net_driver);
2602 module_init(spider_net_init);
2603 module_exit(spider_net_cleanup);