include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / scsi / osst.c
blobde0b1a704fb508d95fb6f7874bbe1433dcb92f4c
1 /*
2 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
3 file Documentation/scsi/st.txt for more information.
5 History:
7 OnStream SCSI Tape support (osst) cloned from st.c by
8 Willem Riede (osst@riede.org) Feb 2000
9 Fixes ... Kurt Garloff <garloff@suse.de> Mar 2000
11 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
12 Contribution and ideas from several people including (in alphabetical
13 order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer,
14 Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale.
16 Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede
17 email osst@riede.org
19 $Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
21 Microscopic alterations - Rik Ling, 2000/12/21
22 Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara
23 Some small formal changes - aeb, 950809
26 static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $";
27 static const char * osst_version = "0.99.4";
29 /* The "failure to reconnect" firmware bug */
30 #define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/
31 #define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/
32 #define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7)
34 #include <linux/module.h>
36 #include <linux/fs.h>
37 #include <linux/kernel.h>
38 #include <linux/sched.h>
39 #include <linux/proc_fs.h>
40 #include <linux/mm.h>
41 #include <linux/slab.h>
42 #include <linux/init.h>
43 #include <linux/string.h>
44 #include <linux/errno.h>
45 #include <linux/mtio.h>
46 #include <linux/ioctl.h>
47 #include <linux/fcntl.h>
48 #include <linux/spinlock.h>
49 #include <linux/vmalloc.h>
50 #include <linux/blkdev.h>
51 #include <linux/moduleparam.h>
52 #include <linux/delay.h>
53 #include <linux/jiffies.h>
54 #include <linux/mutex.h>
55 #include <asm/uaccess.h>
56 #include <asm/dma.h>
57 #include <asm/system.h>
59 /* The driver prints some debugging information on the console if DEBUG
60 is defined and non-zero. */
61 #define DEBUG 0
63 /* The message level for the debug messages is currently set to KERN_NOTICE
64 so that people can easily see the messages. Later when the debugging messages
65 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
66 #define OSST_DEB_MSG KERN_NOTICE
68 #include <scsi/scsi.h>
69 #include <scsi/scsi_dbg.h>
70 #include <scsi/scsi_device.h>
71 #include <scsi/scsi_driver.h>
72 #include <scsi/scsi_eh.h>
73 #include <scsi/scsi_host.h>
74 #include <scsi/scsi_ioctl.h>
76 #define ST_KILOBYTE 1024
78 #include "st.h"
79 #include "osst.h"
80 #include "osst_options.h"
81 #include "osst_detect.h"
83 static DEFINE_MUTEX(osst_int_mutex);
84 static int max_dev = 0;
85 static int write_threshold_kbs = 0;
86 static int max_sg_segs = 0;
88 #ifdef MODULE
89 MODULE_AUTHOR("Willem Riede");
90 MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver");
91 MODULE_LICENSE("GPL");
92 MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR);
93 MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
95 module_param(max_dev, int, 0444);
96 MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)");
98 module_param(write_threshold_kbs, int, 0644);
99 MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)");
101 module_param(max_sg_segs, int, 0644);
102 MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)");
103 #else
104 static struct osst_dev_parm {
105 char *name;
106 int *val;
107 } parms[] __initdata = {
108 { "max_dev", &max_dev },
109 { "write_threshold_kbs", &write_threshold_kbs },
110 { "max_sg_segs", &max_sg_segs }
112 #endif
114 /* Some default definitions have been moved to osst_options.h */
115 #define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE)
116 #define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE)
118 /* The buffer size should fit into the 24 bits for length in the
119 6-byte SCSI read and write commands. */
120 #if OSST_BUFFER_SIZE >= (2 << 24 - 1)
121 #error "Buffer size should not exceed (2 << 24 - 1) bytes!"
122 #endif
124 #if DEBUG
125 static int debugging = 1;
126 /* uncomment define below to test error recovery */
127 // #define OSST_INJECT_ERRORS 1
128 #endif
130 /* Do not retry! The drive firmware already retries when appropriate,
131 and when it tries to tell us something, we had better listen... */
132 #define MAX_RETRIES 0
134 #define NO_TAPE NOT_READY
136 #define OSST_WAIT_POSITION_COMPLETE (HZ > 200 ? HZ / 200 : 1)
137 #define OSST_WAIT_WRITE_COMPLETE (HZ / 12)
138 #define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2)
140 #define OSST_TIMEOUT (200 * HZ)
141 #define OSST_LONG_TIMEOUT (1800 * HZ)
143 #define TAPE_NR(x) (iminor(x) & ~(-1 << ST_MODE_SHIFT))
144 #define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
145 #define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0)
146 #define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1))
148 /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
149 24 bits) */
150 #define SET_DENS_AND_BLK 0x10001
152 static int osst_buffer_size = OSST_BUFFER_SIZE;
153 static int osst_write_threshold = OSST_WRITE_THRESHOLD;
154 static int osst_max_sg_segs = OSST_MAX_SG;
155 static int osst_max_dev = OSST_MAX_TAPES;
156 static int osst_nr_dev;
158 static struct osst_tape **os_scsi_tapes = NULL;
159 static DEFINE_RWLOCK(os_scsi_tapes_lock);
161 static int modes_defined = 0;
163 static struct osst_buffer *new_tape_buffer(int, int, int);
164 static int enlarge_buffer(struct osst_buffer *, int);
165 static void normalize_buffer(struct osst_buffer *);
166 static int append_to_buffer(const char __user *, struct osst_buffer *, int);
167 static int from_buffer(struct osst_buffer *, char __user *, int);
168 static int osst_zero_buffer_tail(struct osst_buffer *);
169 static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *);
170 static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *);
172 static int osst_probe(struct device *);
173 static int osst_remove(struct device *);
175 static struct scsi_driver osst_template = {
176 .owner = THIS_MODULE,
177 .gendrv = {
178 .name = "osst",
179 .probe = osst_probe,
180 .remove = osst_remove,
184 static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt,
185 unsigned int cmd_in, unsigned long arg);
187 static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip);
189 static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt);
191 static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt);
193 static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending);
195 static inline char *tape_name(struct osst_tape *tape)
197 return tape->drive->disk_name;
200 /* Routines that handle the interaction with mid-layer SCSI routines */
203 /* Normalize Sense */
204 static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s)
206 const u8 *ucp;
207 const u8 *sense = SRpnt->sense;
209 s->have_sense = scsi_normalize_sense(SRpnt->sense,
210 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
211 s->flags = 0;
213 if (s->have_sense) {
214 s->deferred = 0;
215 s->remainder_valid =
216 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
217 switch (sense[0] & 0x7f) {
218 case 0x71:
219 s->deferred = 1;
220 case 0x70:
221 s->fixed_format = 1;
222 s->flags = sense[2] & 0xe0;
223 break;
224 case 0x73:
225 s->deferred = 1;
226 case 0x72:
227 s->fixed_format = 0;
228 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
229 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
230 break;
235 /* Convert the result to success code */
236 static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt)
238 char *name = tape_name(STp);
239 int result = SRpnt->result;
240 u8 * sense = SRpnt->sense, scode;
241 #if DEBUG
242 const char *stp;
243 #endif
244 struct st_cmdstatus *cmdstatp;
246 if (!result)
247 return 0;
249 cmdstatp = &STp->buffer->cmdstat;
250 osst_analyze_sense(SRpnt, cmdstatp);
252 if (cmdstatp->have_sense)
253 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
254 else
255 scode = 0;
256 #if DEBUG
257 if (debugging) {
258 printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n",
259 name, result,
260 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
261 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
262 if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n",
263 name, scode, sense[12], sense[13]);
264 if (cmdstatp->have_sense)
265 __scsi_print_sense("osst ", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
267 else
268 #endif
269 if (cmdstatp->have_sense && (
270 scode != NO_SENSE &&
271 scode != RECOVERED_ERROR &&
272 /* scode != UNIT_ATTENTION && */
273 scode != BLANK_CHECK &&
274 scode != VOLUME_OVERFLOW &&
275 SRpnt->cmd[0] != MODE_SENSE &&
276 SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */
277 if (cmdstatp->have_sense) {
278 printk(KERN_WARNING "%s:W: Command with sense data:\n", name);
279 __scsi_print_sense("osst ", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
281 else {
282 static int notyetprinted = 1;
284 printk(KERN_WARNING
285 "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n",
286 name, result, driver_byte(result),
287 host_byte(result));
288 if (notyetprinted) {
289 notyetprinted = 0;
290 printk(KERN_INFO
291 "%s:I: This warning may be caused by your scsi controller,\n", name);
292 printk(KERN_INFO
293 "%s:I: it has been reported with some Buslogic cards.\n", name);
297 STp->pos_unknown |= STp->device->was_reset;
299 if (cmdstatp->have_sense && scode == RECOVERED_ERROR) {
300 STp->recover_count++;
301 STp->recover_erreg++;
302 #if DEBUG
303 if (debugging) {
304 if (SRpnt->cmd[0] == READ_6)
305 stp = "read";
306 else if (SRpnt->cmd[0] == WRITE_6)
307 stp = "write";
308 else
309 stp = "ioctl";
310 printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp,
311 STp->recover_count);
313 #endif
314 if ((sense[2] & 0xe0) == 0)
315 return 0;
317 return (-EIO);
321 /* Wakeup from interrupt */
322 static void osst_end_async(struct request *req, int update)
324 struct osst_request *SRpnt = req->end_io_data;
325 struct osst_tape *STp = SRpnt->stp;
326 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
328 STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
329 #if DEBUG
330 STp->write_pending = 0;
331 #endif
332 if (SRpnt->waiting)
333 complete(SRpnt->waiting);
335 if (SRpnt->bio) {
336 kfree(mdata->pages);
337 blk_rq_unmap_user(SRpnt->bio);
340 __blk_put_request(req->q, req);
343 /* osst_request memory management */
344 static struct osst_request *osst_allocate_request(void)
346 return kzalloc(sizeof(struct osst_request), GFP_KERNEL);
349 static void osst_release_request(struct osst_request *streq)
351 kfree(streq);
354 static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd,
355 int cmd_len, int data_direction, void *buffer, unsigned bufflen,
356 int use_sg, int timeout, int retries)
358 struct request *req;
359 struct page **pages = NULL;
360 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
362 int err = 0;
363 int write = (data_direction == DMA_TO_DEVICE);
365 req = blk_get_request(SRpnt->stp->device->request_queue, write, GFP_KERNEL);
366 if (!req)
367 return DRIVER_ERROR << 24;
369 req->cmd_type = REQ_TYPE_BLOCK_PC;
370 req->cmd_flags |= REQ_QUIET;
372 SRpnt->bio = NULL;
374 if (use_sg) {
375 struct scatterlist *sg, *sgl = (struct scatterlist *)buffer;
376 int i;
378 pages = kzalloc(use_sg * sizeof(struct page *), GFP_KERNEL);
379 if (!pages)
380 goto free_req;
382 for_each_sg(sgl, sg, use_sg, i)
383 pages[i] = sg_page(sg);
385 mdata->null_mapped = 1;
387 mdata->page_order = get_order(sgl[0].length);
388 mdata->nr_entries =
389 DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order);
390 mdata->offset = 0;
392 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL);
393 if (err) {
394 kfree(pages);
395 goto free_req;
397 SRpnt->bio = req->bio;
398 mdata->pages = pages;
400 } else if (bufflen) {
401 err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL);
402 if (err)
403 goto free_req;
406 req->cmd_len = cmd_len;
407 memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
408 memcpy(req->cmd, cmd, req->cmd_len);
409 req->sense = SRpnt->sense;
410 req->sense_len = 0;
411 req->timeout = timeout;
412 req->retries = retries;
413 req->end_io_data = SRpnt;
415 blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async);
416 return 0;
417 free_req:
418 blk_put_request(req);
419 return DRIVER_ERROR << 24;
422 /* Do the scsi command. Waits until command performed if do_wait is true.
423 Otherwise osst_write_behind_check() is used to check that the command
424 has finished. */
425 static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp,
426 unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait)
428 unsigned char *bp;
429 unsigned short use_sg;
430 #ifdef OSST_INJECT_ERRORS
431 static int inject = 0;
432 static int repeat = 0;
433 #endif
434 struct completion *waiting;
436 /* if async, make sure there's no command outstanding */
437 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
438 printk(KERN_ERR "%s: Async command already active.\n",
439 tape_name(STp));
440 if (signal_pending(current))
441 (STp->buffer)->syscall_result = (-EINTR);
442 else
443 (STp->buffer)->syscall_result = (-EBUSY);
444 return NULL;
447 if (SRpnt == NULL) {
448 SRpnt = osst_allocate_request();
449 if (SRpnt == NULL) {
450 printk(KERN_ERR "%s: Can't allocate SCSI request.\n",
451 tape_name(STp));
452 if (signal_pending(current))
453 (STp->buffer)->syscall_result = (-EINTR);
454 else
455 (STp->buffer)->syscall_result = (-EBUSY);
456 return NULL;
458 SRpnt->stp = STp;
461 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
462 which IO is outstanding. It's nulled out when the IO completes. */
463 if (!do_wait)
464 (STp->buffer)->last_SRpnt = SRpnt;
466 waiting = &STp->wait;
467 init_completion(waiting);
468 SRpnt->waiting = waiting;
470 use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0;
471 if (use_sg) {
472 bp = (char *)&(STp->buffer->sg[0]);
473 if (STp->buffer->sg_segs < use_sg)
474 use_sg = STp->buffer->sg_segs;
476 else
477 bp = (STp->buffer)->b_data;
479 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
480 STp->buffer->cmdstat.have_sense = 0;
481 STp->buffer->syscall_result = 0;
483 if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes,
484 use_sg, timeout, retries))
485 /* could not allocate the buffer or request was too large */
486 (STp->buffer)->syscall_result = (-EBUSY);
487 else if (do_wait) {
488 wait_for_completion(waiting);
489 SRpnt->waiting = NULL;
490 STp->buffer->syscall_result = osst_chk_result(STp, SRpnt);
491 #ifdef OSST_INJECT_ERRORS
492 if (STp->buffer->syscall_result == 0 &&
493 cmd[0] == READ_6 &&
494 cmd[4] &&
495 ( (++ inject % 83) == 29 ||
496 (STp->first_frame_position == 240
497 /* or STp->read_error_frame to fail again on the block calculated above */ &&
498 ++repeat < 3))) {
499 printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp));
500 STp->buffer->last_result_fatal = 1;
502 #endif
504 return SRpnt;
508 /* Handle the write-behind checking (downs the semaphore) */
509 static void osst_write_behind_check(struct osst_tape *STp)
511 struct osst_buffer * STbuffer;
513 STbuffer = STp->buffer;
515 #if DEBUG
516 if (STp->write_pending)
517 STp->nbr_waits++;
518 else
519 STp->nbr_finished++;
520 #endif
521 wait_for_completion(&(STp->wait));
522 STp->buffer->last_SRpnt->waiting = NULL;
524 STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt);
526 if (STp->buffer->syscall_result)
527 STp->buffer->syscall_result =
528 osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1);
529 else
530 STp->first_frame_position++;
532 osst_release_request(STp->buffer->last_SRpnt);
534 if (STbuffer->writing < STbuffer->buffer_bytes)
535 printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n");
537 STbuffer->last_SRpnt = NULL;
538 STbuffer->buffer_bytes -= STbuffer->writing;
539 STbuffer->writing = 0;
541 return;
546 /* Onstream specific Routines */
548 * Initialize the OnStream AUX
550 static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number,
551 int logical_blk_num, int blk_sz, int blk_cnt)
553 os_aux_t *aux = STp->buffer->aux;
554 os_partition_t *par = &aux->partition;
555 os_dat_t *dat = &aux->dat;
557 if (STp->raw) return;
559 memset(aux, 0, sizeof(*aux));
560 aux->format_id = htonl(0);
561 memcpy(aux->application_sig, "LIN4", 4);
562 aux->hdwr = htonl(0);
563 aux->frame_type = frame_type;
565 switch (frame_type) {
566 case OS_FRAME_TYPE_HEADER:
567 aux->update_frame_cntr = htonl(STp->update_frame_cntr);
568 par->partition_num = OS_CONFIG_PARTITION;
569 par->par_desc_ver = OS_PARTITION_VERSION;
570 par->wrt_pass_cntr = htons(0xffff);
571 /* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */
572 par->first_frame_ppos = htonl(0);
573 par->last_frame_ppos = htonl(0xbb7);
574 aux->frame_seq_num = htonl(0);
575 aux->logical_blk_num_high = htonl(0);
576 aux->logical_blk_num = htonl(0);
577 aux->next_mark_ppos = htonl(STp->first_mark_ppos);
578 break;
579 case OS_FRAME_TYPE_DATA:
580 case OS_FRAME_TYPE_MARKER:
581 dat->dat_sz = 8;
582 dat->reserved1 = 0;
583 dat->entry_cnt = 1;
584 dat->reserved3 = 0;
585 dat->dat_list[0].blk_sz = htonl(blk_sz);
586 dat->dat_list[0].blk_cnt = htons(blk_cnt);
587 dat->dat_list[0].flags = frame_type==OS_FRAME_TYPE_MARKER?
588 OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA;
589 dat->dat_list[0].reserved = 0;
590 case OS_FRAME_TYPE_EOD:
591 aux->update_frame_cntr = htonl(0);
592 par->partition_num = OS_DATA_PARTITION;
593 par->par_desc_ver = OS_PARTITION_VERSION;
594 par->wrt_pass_cntr = htons(STp->wrt_pass_cntr);
595 par->first_frame_ppos = htonl(STp->first_data_ppos);
596 par->last_frame_ppos = htonl(STp->capacity);
597 aux->frame_seq_num = htonl(frame_seq_number);
598 aux->logical_blk_num_high = htonl(0);
599 aux->logical_blk_num = htonl(logical_blk_num);
600 break;
601 default: ; /* probably FILL */
603 aux->filemark_cnt = htonl(STp->filemark_cnt);
604 aux->phys_fm = htonl(0xffffffff);
605 aux->last_mark_ppos = htonl(STp->last_mark_ppos);
606 aux->last_mark_lbn = htonl(STp->last_mark_lbn);
610 * Verify that we have the correct tape frame
612 static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet)
614 char * name = tape_name(STp);
615 os_aux_t * aux = STp->buffer->aux;
616 os_partition_t * par = &(aux->partition);
617 struct st_partstat * STps = &(STp->ps[STp->partition]);
618 int blk_cnt, blk_sz, i;
620 if (STp->raw) {
621 if (STp->buffer->syscall_result) {
622 for (i=0; i < STp->buffer->sg_segs; i++)
623 memset(page_address(sg_page(&STp->buffer->sg[i])),
624 0, STp->buffer->sg[i].length);
625 strcpy(STp->buffer->b_data, "READ ERROR ON FRAME");
626 } else
627 STp->buffer->buffer_bytes = OS_FRAME_SIZE;
628 return 1;
630 if (STp->buffer->syscall_result) {
631 #if DEBUG
632 printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name);
633 #endif
634 return 0;
636 if (ntohl(aux->format_id) != 0) {
637 #if DEBUG
638 printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id));
639 #endif
640 goto err_out;
642 if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 &&
643 (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) {
644 #if DEBUG
645 printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name);
646 #endif
647 goto err_out;
649 if (par->partition_num != OS_DATA_PARTITION) {
650 if (!STp->linux_media || STp->linux_media_version != 2) {
651 #if DEBUG
652 printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n",
653 name, par->partition_num);
654 #endif
655 goto err_out;
658 if (par->par_desc_ver != OS_PARTITION_VERSION) {
659 #if DEBUG
660 printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver);
661 #endif
662 goto err_out;
664 if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) {
665 #if DEBUG
666 printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n",
667 name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr);
668 #endif
669 goto err_out;
671 if (aux->frame_type != OS_FRAME_TYPE_DATA &&
672 aux->frame_type != OS_FRAME_TYPE_EOD &&
673 aux->frame_type != OS_FRAME_TYPE_MARKER) {
674 if (!quiet) {
675 #if DEBUG
676 printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
677 #endif
679 goto err_out;
681 if (aux->frame_type == OS_FRAME_TYPE_EOD &&
682 STp->first_frame_position < STp->eod_frame_ppos) {
683 printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name,
684 STp->first_frame_position);
685 goto err_out;
687 if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
688 if (!quiet) {
689 #if DEBUG
690 printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n",
691 name, ntohl(aux->frame_seq_num), frame_seq_number);
692 #endif
694 goto err_out;
696 if (aux->frame_type == OS_FRAME_TYPE_MARKER) {
697 STps->eof = ST_FM_HIT;
699 i = ntohl(aux->filemark_cnt);
700 if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt ||
701 STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) {
702 #if DEBUG
703 printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name,
704 STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected",
705 i, STp->first_frame_position - 1);
706 #endif
707 STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1);
708 if (i >= STp->filemark_cnt)
709 STp->filemark_cnt = i+1;
712 if (aux->frame_type == OS_FRAME_TYPE_EOD) {
713 STps->eof = ST_EOD_1;
714 STp->frame_in_buffer = 1;
716 if (aux->frame_type == OS_FRAME_TYPE_DATA) {
717 blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt);
718 blk_sz = ntohl(aux->dat.dat_list[0].blk_sz);
719 STp->buffer->buffer_bytes = blk_cnt * blk_sz;
720 STp->buffer->read_pointer = 0;
721 STp->frame_in_buffer = 1;
723 /* See what block size was used to write file */
724 if (STp->block_size != blk_sz && blk_sz > 0) {
725 printk(KERN_INFO
726 "%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n",
727 name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k',
728 STp->block_size<1024?STp->block_size:STp->block_size/1024,
729 STp->block_size<1024?'b':'k');
730 STp->block_size = blk_sz;
731 STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz;
733 STps->eof = ST_NOEOF;
735 STp->frame_seq_number = ntohl(aux->frame_seq_num);
736 STp->logical_blk_num = ntohl(aux->logical_blk_num);
737 return 1;
739 err_out:
740 if (STp->read_error_frame == 0)
741 STp->read_error_frame = STp->first_frame_position - 1;
742 return 0;
746 * Wait for the unit to become Ready
748 static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt,
749 unsigned timeout, int initial_delay)
751 unsigned char cmd[MAX_COMMAND_SIZE];
752 struct osst_request * SRpnt;
753 unsigned long startwait = jiffies;
754 #if DEBUG
755 int dbg = debugging;
756 char * name = tape_name(STp);
758 printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name);
759 #endif
761 if (initial_delay > 0)
762 msleep(jiffies_to_msecs(initial_delay));
764 memset(cmd, 0, MAX_COMMAND_SIZE);
765 cmd[0] = TEST_UNIT_READY;
767 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
768 *aSRpnt = SRpnt;
769 if (!SRpnt) return (-EBUSY);
771 while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
772 (( SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
773 (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8) ) ||
774 ( SRpnt->sense[2] == 6 && SRpnt->sense[12] == 0x28 &&
775 SRpnt->sense[13] == 0 ) )) {
776 #if DEBUG
777 if (debugging) {
778 printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name);
779 printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
780 debugging = 0;
782 #endif
783 msleep(100);
785 memset(cmd, 0, MAX_COMMAND_SIZE);
786 cmd[0] = TEST_UNIT_READY;
788 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
790 *aSRpnt = SRpnt;
791 #if DEBUG
792 debugging = dbg;
793 #endif
794 if ( STp->buffer->syscall_result &&
795 osst_write_error_recovery(STp, aSRpnt, 0) ) {
796 #if DEBUG
797 printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name);
798 printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
799 STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
800 SRpnt->sense[12], SRpnt->sense[13]);
801 #endif
802 return (-EIO);
804 #if DEBUG
805 printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name);
806 #endif
807 return 0;
811 * Wait for a tape to be inserted in the unit
813 static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout)
815 unsigned char cmd[MAX_COMMAND_SIZE];
816 struct osst_request * SRpnt;
817 unsigned long startwait = jiffies;
818 #if DEBUG
819 int dbg = debugging;
820 char * name = tape_name(STp);
822 printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name);
823 #endif
825 memset(cmd, 0, MAX_COMMAND_SIZE);
826 cmd[0] = TEST_UNIT_READY;
828 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
829 *aSRpnt = SRpnt;
830 if (!SRpnt) return (-EBUSY);
832 while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
833 SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0 ) {
834 #if DEBUG
835 if (debugging) {
836 printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name);
837 printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
838 debugging = 0;
840 #endif
841 msleep(100);
843 memset(cmd, 0, MAX_COMMAND_SIZE);
844 cmd[0] = TEST_UNIT_READY;
846 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
848 *aSRpnt = SRpnt;
849 #if DEBUG
850 debugging = dbg;
851 #endif
852 if ( STp->buffer->syscall_result && SRpnt->sense[2] != 2 &&
853 SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) {
854 #if DEBUG
855 printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name);
856 printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
857 STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
858 SRpnt->sense[12], SRpnt->sense[13]);
859 #endif
860 return 0;
862 #if DEBUG
863 printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name);
864 #endif
865 return 1;
868 static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame)
870 int retval;
872 osst_wait_ready(STp, aSRpnt, 15 * 60, 0); /* TODO - can this catch a write error? */
873 retval = osst_set_frame_position(STp, aSRpnt, frame, 0);
874 if (retval) return (retval);
875 osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE);
876 return (osst_get_frame_position(STp, aSRpnt));
880 * Wait for write(s) to complete
882 static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt)
884 unsigned char cmd[MAX_COMMAND_SIZE];
885 struct osst_request * SRpnt;
886 int result = 0;
887 int delay = OSST_WAIT_WRITE_COMPLETE;
888 #if DEBUG
889 char * name = tape_name(STp);
891 printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name);
892 #endif
894 memset(cmd, 0, MAX_COMMAND_SIZE);
895 cmd[0] = WRITE_FILEMARKS;
896 cmd[1] = 1;
898 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
899 *aSRpnt = SRpnt;
900 if (!SRpnt) return (-EBUSY);
901 if (STp->buffer->syscall_result) {
902 if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) {
903 if (SRpnt->sense[13] == 8) {
904 delay = OSST_WAIT_LONG_WRITE_COMPLETE;
906 } else
907 result = osst_write_error_recovery(STp, aSRpnt, 0);
909 result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay);
910 STp->ps[STp->partition].rw = OS_WRITING_COMPLETE;
912 return (result);
915 #define OSST_POLL_PER_SEC 10
916 static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to)
918 unsigned long startwait = jiffies;
919 char * name = tape_name(STp);
920 #if DEBUG
921 char notyetprinted = 1;
922 #endif
923 if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING)
924 printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name);
926 while (time_before (jiffies, startwait + to*HZ))
928 int result;
929 result = osst_get_frame_position(STp, aSRpnt);
930 if (result == -EIO)
931 if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0)
932 return 0; /* successful recovery leaves drive ready for frame */
933 if (result < 0) break;
934 if (STp->first_frame_position == curr &&
935 ((minlast < 0 &&
936 (signed)STp->last_frame_position > (signed)curr + minlast) ||
937 (minlast >= 0 && STp->cur_frames > minlast)
938 ) && result >= 0)
940 #if DEBUG
941 if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC))
942 printk (OSST_DEB_MSG
943 "%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n",
944 name, curr, curr+minlast, STp->first_frame_position,
945 STp->last_frame_position, STp->cur_frames,
946 result, (jiffies-startwait)/HZ,
947 (((jiffies-startwait)%HZ)*10)/HZ);
948 #endif
949 return 0;
951 #if DEBUG
952 if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted)
954 printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n",
955 name, curr, curr+minlast, STp->first_frame_position,
956 STp->last_frame_position, STp->cur_frames, result);
957 notyetprinted--;
959 #endif
960 msleep(1000 / OSST_POLL_PER_SEC);
962 #if DEBUG
963 printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n",
964 name, curr, curr+minlast, STp->first_frame_position,
965 STp->last_frame_position, STp->cur_frames,
966 (jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ);
967 #endif
968 return -EBUSY;
971 static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing)
973 struct osst_request * SRpnt;
974 unsigned char cmd[MAX_COMMAND_SIZE];
975 unsigned long startwait = jiffies;
976 int retval = 1;
977 char * name = tape_name(STp);
979 if (writing) {
980 char mybuf[24];
981 char * olddata = STp->buffer->b_data;
982 int oldsize = STp->buffer->buffer_size;
984 /* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */
986 memset(cmd, 0, MAX_COMMAND_SIZE);
987 cmd[0] = WRITE_FILEMARKS;
988 cmd[1] = 1;
989 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
990 MAX_RETRIES, 1);
992 while (retval && time_before (jiffies, startwait + 5*60*HZ)) {
994 if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) {
996 /* some failure - not just not-ready */
997 retval = osst_write_error_recovery(STp, aSRpnt, 0);
998 break;
1000 schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC);
1002 STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
1003 memset(cmd, 0, MAX_COMMAND_SIZE);
1004 cmd[0] = READ_POSITION;
1006 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout,
1007 MAX_RETRIES, 1);
1009 retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 );
1010 STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
1012 if (retval)
1013 printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name);
1014 } else
1015 /* TODO - figure out which error conditions can be handled */
1016 if (STp->buffer->syscall_result)
1017 printk(KERN_WARNING
1018 "%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name,
1019 (*aSRpnt)->sense[ 2] & 0x0f,
1020 (*aSRpnt)->sense[12],
1021 (*aSRpnt)->sense[13]);
1023 return retval;
1027 * Read the next OnStream tape frame at the current location
1029 static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout)
1031 unsigned char cmd[MAX_COMMAND_SIZE];
1032 struct osst_request * SRpnt;
1033 int retval = 0;
1034 #if DEBUG
1035 os_aux_t * aux = STp->buffer->aux;
1036 char * name = tape_name(STp);
1037 #endif
1039 if (STp->poll)
1040 if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout))
1041 retval = osst_recover_wait_frame(STp, aSRpnt, 0);
1043 memset(cmd, 0, MAX_COMMAND_SIZE);
1044 cmd[0] = READ_6;
1045 cmd[1] = 1;
1046 cmd[4] = 1;
1048 #if DEBUG
1049 if (debugging)
1050 printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name);
1051 #endif
1052 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
1053 STp->timeout, MAX_RETRIES, 1);
1054 *aSRpnt = SRpnt;
1055 if (!SRpnt)
1056 return (-EBUSY);
1058 if ((STp->buffer)->syscall_result) {
1059 retval = 1;
1060 if (STp->read_error_frame == 0) {
1061 STp->read_error_frame = STp->first_frame_position;
1062 #if DEBUG
1063 printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame);
1064 #endif
1066 #if DEBUG
1067 if (debugging)
1068 printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1069 name,
1070 SRpnt->sense[0], SRpnt->sense[1],
1071 SRpnt->sense[2], SRpnt->sense[3],
1072 SRpnt->sense[4], SRpnt->sense[5],
1073 SRpnt->sense[6], SRpnt->sense[7]);
1074 #endif
1076 else
1077 STp->first_frame_position++;
1078 #if DEBUG
1079 if (debugging) {
1080 char sig[8]; int i;
1081 for (i=0;i<4;i++)
1082 sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i];
1083 sig[4] = '\0';
1084 printk(OSST_DEB_MSG
1085 "%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig,
1086 ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr),
1087 aux->frame_type==1?"EOD":aux->frame_type==2?"MARK":
1088 aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL",
1089 ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
1090 ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) );
1091 if (aux->frame_type==2)
1092 printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name,
1093 ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn));
1094 printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval);
1096 #endif
1097 return (retval);
1100 static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt)
1102 struct st_partstat * STps = &(STp->ps[STp->partition]);
1103 struct osst_request * SRpnt ;
1104 unsigned char cmd[MAX_COMMAND_SIZE];
1105 int retval = 0;
1106 char * name = tape_name(STp);
1108 if (STps->rw != ST_READING) { /* Initialize read operation */
1109 if (STps->rw == ST_WRITING || STp->dirty) {
1110 STp->write_type = OS_WRITE_DATA;
1111 osst_flush_write_buffer(STp, aSRpnt);
1112 osst_flush_drive_buffer(STp, aSRpnt);
1114 STps->rw = ST_READING;
1115 STp->frame_in_buffer = 0;
1118 * Issue a read 0 command to get the OnStream drive
1119 * read frames into its buffer.
1121 memset(cmd, 0, MAX_COMMAND_SIZE);
1122 cmd[0] = READ_6;
1123 cmd[1] = 1;
1125 #if DEBUG
1126 printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name);
1127 #endif
1128 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
1129 *aSRpnt = SRpnt;
1130 if ((retval = STp->buffer->syscall_result))
1131 printk(KERN_WARNING "%s:W: Error starting read ahead\n", name);
1134 return retval;
1137 static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt,
1138 int frame_seq_number, int quiet)
1140 struct st_partstat * STps = &(STp->ps[STp->partition]);
1141 char * name = tape_name(STp);
1142 int cnt = 0,
1143 bad = 0,
1144 past = 0,
1146 position;
1149 * If we want just any frame (-1) and there is a frame in the buffer, return it
1151 if (frame_seq_number == -1 && STp->frame_in_buffer) {
1152 #if DEBUG
1153 printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number);
1154 #endif
1155 return (STps->eof);
1158 * Search and wait for the next logical tape frame
1160 while (1) {
1161 if (cnt++ > 400) {
1162 printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n",
1163 name, frame_seq_number);
1164 if (STp->read_error_frame) {
1165 osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0);
1166 #if DEBUG
1167 printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n",
1168 name, STp->read_error_frame);
1169 #endif
1170 STp->read_error_frame = 0;
1171 STp->abort_count++;
1173 return (-EIO);
1175 #if DEBUG
1176 if (debugging)
1177 printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n",
1178 name, frame_seq_number, cnt);
1179 #endif
1180 if ( osst_initiate_read(STp, aSRpnt)
1181 || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) {
1182 if (STp->raw)
1183 return (-EIO);
1184 position = osst_get_frame_position(STp, aSRpnt);
1185 if (position >= 0xbae && position < 0xbb8)
1186 position = 0xbb8;
1187 else if (position > STp->eod_frame_ppos || ++bad == 10) {
1188 position = STp->read_error_frame - 1;
1189 bad = 0;
1191 else {
1192 position += 29;
1193 cnt += 19;
1195 #if DEBUG
1196 printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n",
1197 name, position);
1198 #endif
1199 osst_set_frame_position(STp, aSRpnt, position, 0);
1200 continue;
1202 if (osst_verify_frame(STp, frame_seq_number, quiet))
1203 break;
1204 if (osst_verify_frame(STp, -1, quiet)) {
1205 x = ntohl(STp->buffer->aux->frame_seq_num);
1206 if (STp->fast_open) {
1207 printk(KERN_WARNING
1208 "%s:W: Found logical frame %d instead of %d after fast open\n",
1209 name, x, frame_seq_number);
1210 STp->header_ok = 0;
1211 STp->read_error_frame = 0;
1212 return (-EIO);
1214 if (x > frame_seq_number) {
1215 if (++past > 3) {
1216 /* positioning backwards did not bring us to the desired frame */
1217 position = STp->read_error_frame - 1;
1219 else {
1220 position = osst_get_frame_position(STp, aSRpnt)
1221 + frame_seq_number - x - 1;
1223 if (STp->first_frame_position >= 3000 && position < 3000)
1224 position -= 10;
1226 #if DEBUG
1227 printk(OSST_DEB_MSG
1228 "%s:D: Found logical frame %d while looking for %d: back up %d\n",
1229 name, x, frame_seq_number,
1230 STp->first_frame_position - position);
1231 #endif
1232 osst_set_frame_position(STp, aSRpnt, position, 0);
1233 cnt += 10;
1235 else
1236 past = 0;
1238 if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) {
1239 #if DEBUG
1240 printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name);
1241 #endif
1242 osst_set_frame_position(STp, aSRpnt, 0xbb8, 0);
1243 cnt--;
1245 STp->frame_in_buffer = 0;
1247 if (cnt > 1) {
1248 STp->recover_count++;
1249 STp->recover_erreg++;
1250 printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n",
1251 name, STp->read_error_frame);
1253 STp->read_count++;
1255 #if DEBUG
1256 if (debugging || STps->eof)
1257 printk(OSST_DEB_MSG
1258 "%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n",
1259 name, frame_seq_number, STp->frame_seq_number, STps->eof);
1260 #endif
1261 STp->fast_open = 0;
1262 STp->read_error_frame = 0;
1263 return (STps->eof);
1266 static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num)
1268 struct st_partstat * STps = &(STp->ps[STp->partition]);
1269 char * name = tape_name(STp);
1270 int retries = 0;
1271 int frame_seq_estimate, ppos_estimate, move;
1273 if (logical_blk_num < 0) logical_blk_num = 0;
1274 #if DEBUG
1275 printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n",
1276 name, logical_blk_num, STp->logical_blk_num,
1277 STp->block_size<1024?STp->block_size:STp->block_size/1024,
1278 STp->block_size<1024?'b':'k');
1279 #endif
1280 /* Do we know where we are? */
1281 if (STps->drv_block >= 0) {
1282 move = logical_blk_num - STp->logical_blk_num;
1283 if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
1284 move /= (OS_DATA_SIZE / STp->block_size);
1285 frame_seq_estimate = STp->frame_seq_number + move;
1286 } else
1287 frame_seq_estimate = logical_blk_num * STp->block_size / OS_DATA_SIZE;
1289 if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10;
1290 else ppos_estimate = frame_seq_estimate + 20;
1291 while (++retries < 10) {
1292 if (ppos_estimate > STp->eod_frame_ppos-2) {
1293 frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate;
1294 ppos_estimate = STp->eod_frame_ppos - 2;
1296 if (frame_seq_estimate < 0) {
1297 frame_seq_estimate = 0;
1298 ppos_estimate = 10;
1300 osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0);
1301 if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) {
1302 /* we've located the estimated frame, now does it have our block? */
1303 if (logical_blk_num < STp->logical_blk_num ||
1304 logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) {
1305 if (STps->eof == ST_FM_HIT)
1306 move = logical_blk_num < STp->logical_blk_num? -2 : 1;
1307 else {
1308 move = logical_blk_num - STp->logical_blk_num;
1309 if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
1310 move /= (OS_DATA_SIZE / STp->block_size);
1312 if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1;
1313 #if DEBUG
1314 printk(OSST_DEB_MSG
1315 "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n",
1316 name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,
1317 STp->logical_blk_num, logical_blk_num, move);
1318 #endif
1319 frame_seq_estimate += move;
1320 ppos_estimate += move;
1321 continue;
1322 } else {
1323 STp->buffer->read_pointer = (logical_blk_num - STp->logical_blk_num) * STp->block_size;
1324 STp->buffer->buffer_bytes -= STp->buffer->read_pointer;
1325 STp->logical_blk_num = logical_blk_num;
1326 #if DEBUG
1327 printk(OSST_DEB_MSG
1328 "%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n",
1329 name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer,
1330 STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size,
1331 STp->block_size);
1332 #endif
1333 STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
1334 if (STps->eof == ST_FM_HIT) {
1335 STps->drv_file++;
1336 STps->drv_block = 0;
1337 } else {
1338 STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
1339 STp->logical_blk_num -
1340 (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
1343 STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
1344 return 0;
1347 if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0)
1348 goto error;
1349 /* we are not yet at the estimated frame, adjust our estimate of its physical position */
1350 #if DEBUG
1351 printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n",
1352 name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,
1353 STp->logical_blk_num, logical_blk_num);
1354 #endif
1355 if (frame_seq_estimate != STp->frame_seq_number)
1356 ppos_estimate += frame_seq_estimate - STp->frame_seq_number;
1357 else
1358 break;
1360 error:
1361 printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n",
1362 name, logical_blk_num, STp->logical_blk_num, retries);
1363 return (-EIO);
1366 /* The values below are based on the OnStream frame payload size of 32K == 2**15,
1367 * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
1368 * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
1369 * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
1371 #define OSST_FRAME_SHIFT 6
1372 #define OSST_SECTOR_SHIFT 9
1373 #define OSST_SECTOR_MASK 0x03F
1375 static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt)
1377 int sector;
1378 #if DEBUG
1379 char * name = tape_name(STp);
1381 printk(OSST_DEB_MSG
1382 "%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n",
1383 name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
1384 STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block,
1385 STp->ps[STp->partition].rw == ST_WRITING?'w':'r',
1386 STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes:
1387 STp->buffer->read_pointer, STp->ps[STp->partition].eof);
1388 #endif
1389 /* do we know where we are inside a file? */
1390 if (STp->ps[STp->partition].drv_block >= 0) {
1391 sector = (STp->frame_in_buffer ? STp->first_frame_position-1 :
1392 STp->first_frame_position) << OSST_FRAME_SHIFT;
1393 if (STp->ps[STp->partition].rw == ST_WRITING)
1394 sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
1395 else
1396 sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
1397 } else {
1398 sector = osst_get_frame_position(STp, aSRpnt);
1399 if (sector > 0)
1400 sector <<= OSST_FRAME_SHIFT;
1402 return sector;
1405 static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector)
1407 struct st_partstat * STps = &(STp->ps[STp->partition]);
1408 int frame = sector >> OSST_FRAME_SHIFT,
1409 offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT,
1411 #if DEBUG
1412 char * name = tape_name(STp);
1414 printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n",
1415 name, sector, frame, offset);
1416 #endif
1417 if (frame < 0 || frame >= STp->capacity) return (-ENXIO);
1419 if (frame <= STp->first_data_ppos) {
1420 STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0;
1421 return (osst_set_frame_position(STp, aSRpnt, frame, 0));
1423 r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0);
1424 if (r < 0) return r;
1426 r = osst_get_logical_frame(STp, aSRpnt, -1, 1);
1427 if (r < 0) return r;
1429 if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO);
1431 if (offset) {
1432 STp->logical_blk_num += offset / STp->block_size;
1433 STp->buffer->read_pointer = offset;
1434 STp->buffer->buffer_bytes -= offset;
1435 } else {
1436 STp->frame_seq_number++;
1437 STp->frame_in_buffer = 0;
1438 STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
1439 STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
1441 STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
1442 if (STps->eof == ST_FM_HIT) {
1443 STps->drv_file++;
1444 STps->drv_block = 0;
1445 } else {
1446 STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
1447 STp->logical_blk_num -
1448 (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
1451 STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
1452 #if DEBUG
1453 printk(OSST_DEB_MSG
1454 "%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n",
1455 name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
1456 STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof);
1457 #endif
1458 return 0;
1462 * Read back the drive's internal buffer contents, as a part
1463 * of the write error recovery mechanism for old OnStream
1464 * firmware revisions.
1465 * Precondition for this function to work: all frames in the
1466 * drive's buffer must be of one type (DATA, MARK or EOD)!
1468 static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt,
1469 unsigned int frame, unsigned int skip, int pending)
1471 struct osst_request * SRpnt = * aSRpnt;
1472 unsigned char * buffer, * p;
1473 unsigned char cmd[MAX_COMMAND_SIZE];
1474 int flag, new_frame, i;
1475 int nframes = STp->cur_frames;
1476 int blks_per_frame = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
1477 int frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num)
1478 - (nframes + pending - 1);
1479 int logical_blk_num = ntohl(STp->buffer->aux->logical_blk_num)
1480 - (nframes + pending - 1) * blks_per_frame;
1481 char * name = tape_name(STp);
1482 unsigned long startwait = jiffies;
1483 #if DEBUG
1484 int dbg = debugging;
1485 #endif
1487 if ((buffer = vmalloc((nframes + 1) * OS_DATA_SIZE)) == NULL)
1488 return (-EIO);
1490 printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n",
1491 name, nframes, pending?" and one that was pending":"");
1493 osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE]));
1494 #if DEBUG
1495 if (pending && debugging)
1496 printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n",
1497 name, frame_seq_number + nframes,
1498 logical_blk_num + nframes * blks_per_frame,
1499 p[0], p[1], p[2], p[3]);
1500 #endif
1501 for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) {
1503 memset(cmd, 0, MAX_COMMAND_SIZE);
1504 cmd[0] = 0x3C; /* Buffer Read */
1505 cmd[1] = 6; /* Retrieve Faulty Block */
1506 cmd[7] = 32768 >> 8;
1507 cmd[8] = 32768 & 0xff;
1509 SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
1510 STp->timeout, MAX_RETRIES, 1);
1512 if ((STp->buffer)->syscall_result || !SRpnt) {
1513 printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name);
1514 vfree(buffer);
1515 *aSRpnt = SRpnt;
1516 return (-EIO);
1518 osst_copy_from_buffer(STp->buffer, p);
1519 #if DEBUG
1520 if (debugging)
1521 printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n",
1522 name, frame_seq_number + i, p[0], p[1], p[2], p[3]);
1523 #endif
1525 *aSRpnt = SRpnt;
1526 osst_get_frame_position(STp, aSRpnt);
1528 #if DEBUG
1529 printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames);
1530 #endif
1531 /* Write synchronously so we can be sure we're OK again and don't have to recover recursively */
1532 /* In the header we don't actually re-write the frames that fail, just the ones after them */
1534 for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) {
1536 if (flag) {
1537 if (STp->write_type == OS_WRITE_HEADER) {
1538 i += skip;
1539 p += skip * OS_DATA_SIZE;
1541 else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990)
1542 new_frame = 3000-i;
1543 else
1544 new_frame += skip;
1545 #if DEBUG
1546 printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n",
1547 name, new_frame+i, frame_seq_number+i);
1548 #endif
1549 osst_set_frame_position(STp, aSRpnt, new_frame + i, 0);
1550 osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE);
1551 osst_get_frame_position(STp, aSRpnt);
1552 SRpnt = * aSRpnt;
1554 if (new_frame > frame + 1000) {
1555 printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name);
1556 vfree(buffer);
1557 return (-EIO);
1559 if ( i >= nframes + pending ) break;
1560 flag = 0;
1562 osst_copy_to_buffer(STp->buffer, p);
1564 * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type!
1566 osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i,
1567 logical_blk_num + i*blks_per_frame,
1568 ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame);
1569 memset(cmd, 0, MAX_COMMAND_SIZE);
1570 cmd[0] = WRITE_6;
1571 cmd[1] = 1;
1572 cmd[4] = 1;
1574 #if DEBUG
1575 if (debugging)
1576 printk(OSST_DEB_MSG
1577 "%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n",
1578 name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame,
1579 p[0], p[1], p[2], p[3]);
1580 #endif
1581 SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
1582 STp->timeout, MAX_RETRIES, 1);
1584 if (STp->buffer->syscall_result)
1585 flag = 1;
1586 else {
1587 p += OS_DATA_SIZE; i++;
1589 /* if we just sent the last frame, wait till all successfully written */
1590 if ( i == nframes + pending ) {
1591 #if DEBUG
1592 printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name);
1593 #endif
1594 memset(cmd, 0, MAX_COMMAND_SIZE);
1595 cmd[0] = WRITE_FILEMARKS;
1596 cmd[1] = 1;
1597 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
1598 STp->timeout, MAX_RETRIES, 1);
1599 #if DEBUG
1600 if (debugging) {
1601 printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
1602 printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
1603 debugging = 0;
1605 #endif
1606 flag = STp->buffer->syscall_result;
1607 while ( !flag && time_before(jiffies, startwait + 60*HZ) ) {
1609 memset(cmd, 0, MAX_COMMAND_SIZE);
1610 cmd[0] = TEST_UNIT_READY;
1612 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
1613 MAX_RETRIES, 1);
1615 if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
1616 (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) {
1617 /* in the process of becoming ready */
1618 msleep(100);
1619 continue;
1621 if (STp->buffer->syscall_result)
1622 flag = 1;
1623 break;
1625 #if DEBUG
1626 debugging = dbg;
1627 printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
1628 #endif
1631 *aSRpnt = SRpnt;
1632 if (flag) {
1633 if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
1634 SRpnt->sense[12] == 0 &&
1635 SRpnt->sense[13] == 2) {
1636 printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name);
1637 vfree(buffer);
1638 return (-EIO); /* hit end of tape = fail */
1640 i = ((SRpnt->sense[3] << 24) |
1641 (SRpnt->sense[4] << 16) |
1642 (SRpnt->sense[5] << 8) |
1643 SRpnt->sense[6] ) - new_frame;
1644 p = &buffer[i * OS_DATA_SIZE];
1645 #if DEBUG
1646 printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i);
1647 #endif
1648 osst_get_frame_position(STp, aSRpnt);
1649 #if DEBUG
1650 printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n",
1651 name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
1652 #endif
1655 if (flag) {
1656 /* error recovery did not successfully complete */
1657 printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name,
1658 STp->write_type == OS_WRITE_HEADER?"header":"body");
1660 if (!pending)
1661 osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */
1662 vfree(buffer);
1663 return 0;
1666 static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt,
1667 unsigned int frame, unsigned int skip, int pending)
1669 unsigned char cmd[MAX_COMMAND_SIZE];
1670 struct osst_request * SRpnt;
1671 char * name = tape_name(STp);
1672 int expected = 0;
1673 int attempts = 1000 / skip;
1674 int flag = 1;
1675 unsigned long startwait = jiffies;
1676 #if DEBUG
1677 int dbg = debugging;
1678 #endif
1680 while (attempts && time_before(jiffies, startwait + 60*HZ)) {
1681 if (flag) {
1682 #if DEBUG
1683 debugging = dbg;
1684 #endif
1685 if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990)
1686 frame = 3000-skip;
1687 expected = frame+skip+STp->cur_frames+pending;
1688 #if DEBUG
1689 printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n",
1690 name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending);
1691 #endif
1692 osst_set_frame_position(STp, aSRpnt, frame + skip, 1);
1693 flag = 0;
1694 attempts--;
1695 schedule_timeout_interruptible(msecs_to_jiffies(100));
1697 if (osst_get_frame_position(STp, aSRpnt) < 0) { /* additional write error */
1698 #if DEBUG
1699 printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n",
1700 name, STp->first_frame_position,
1701 STp->last_frame_position, STp->cur_frames);
1702 #endif
1703 frame = STp->last_frame_position;
1704 flag = 1;
1705 continue;
1707 if (pending && STp->cur_frames < 50) {
1709 memset(cmd, 0, MAX_COMMAND_SIZE);
1710 cmd[0] = WRITE_6;
1711 cmd[1] = 1;
1712 cmd[4] = 1;
1713 #if DEBUG
1714 printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n",
1715 name, STp->frame_seq_number-1, STp->first_frame_position);
1716 #endif
1717 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
1718 STp->timeout, MAX_RETRIES, 1);
1719 *aSRpnt = SRpnt;
1721 if (STp->buffer->syscall_result) { /* additional write error */
1722 if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
1723 SRpnt->sense[12] == 0 &&
1724 SRpnt->sense[13] == 2) {
1725 printk(KERN_ERR
1726 "%s:E: Volume overflow in write error recovery\n",
1727 name);
1728 break; /* hit end of tape = fail */
1730 flag = 1;
1732 else
1733 pending = 0;
1735 continue;
1737 if (STp->cur_frames == 0) {
1738 #if DEBUG
1739 debugging = dbg;
1740 printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
1741 #endif
1742 if (STp->first_frame_position != expected) {
1743 printk(KERN_ERR "%s:A: Actual position %d - expected %d\n",
1744 name, STp->first_frame_position, expected);
1745 return (-EIO);
1747 return 0;
1749 #if DEBUG
1750 if (debugging) {
1751 printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
1752 printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
1753 debugging = 0;
1755 #endif
1756 schedule_timeout_interruptible(msecs_to_jiffies(100));
1758 printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name);
1759 #if DEBUG
1760 debugging = dbg;
1761 #endif
1762 return (-EIO);
1766 * Error recovery algorithm for the OnStream tape.
1769 static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending)
1771 struct osst_request * SRpnt = * aSRpnt;
1772 struct st_partstat * STps = & STp->ps[STp->partition];
1773 char * name = tape_name(STp);
1774 int retval = 0;
1775 int rw_state;
1776 unsigned int frame, skip;
1778 rw_state = STps->rw;
1780 if ((SRpnt->sense[ 2] & 0x0f) != 3
1781 || SRpnt->sense[12] != 12
1782 || SRpnt->sense[13] != 0) {
1783 #if DEBUG
1784 printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name,
1785 SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]);
1786 #endif
1787 return (-EIO);
1789 frame = (SRpnt->sense[3] << 24) |
1790 (SRpnt->sense[4] << 16) |
1791 (SRpnt->sense[5] << 8) |
1792 SRpnt->sense[6];
1793 skip = SRpnt->sense[9];
1795 #if DEBUG
1796 printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip);
1797 #endif
1798 osst_get_frame_position(STp, aSRpnt);
1799 #if DEBUG
1800 printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n",
1801 name, STp->first_frame_position, STp->last_frame_position);
1802 #endif
1803 switch (STp->write_type) {
1804 case OS_WRITE_DATA:
1805 case OS_WRITE_EOD:
1806 case OS_WRITE_NEW_MARK:
1807 printk(KERN_WARNING
1808 "%s:I: Relocating %d buffered logical frames from position %u to %u\n",
1809 name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip);
1810 if (STp->os_fw_rev >= 10600)
1811 retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending);
1812 else
1813 retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending);
1814 printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name,
1815 retval?"E" :"I",
1816 retval?"" :"Don't worry, ",
1817 retval?" not ":" ");
1818 break;
1819 case OS_WRITE_LAST_MARK:
1820 printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name);
1821 osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
1822 retval = -EIO;
1823 break;
1824 case OS_WRITE_HEADER:
1825 printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name);
1826 retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending);
1827 break;
1828 default:
1829 printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name);
1830 osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
1832 osst_get_frame_position(STp, aSRpnt);
1833 #if DEBUG
1834 printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n",
1835 name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position);
1836 printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num);
1837 #endif
1838 if (retval == 0) {
1839 STp->recover_count++;
1840 STp->recover_erreg++;
1841 } else
1842 STp->abort_count++;
1844 STps->rw = rw_state;
1845 return retval;
1848 static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt,
1849 int mt_op, int mt_count)
1851 char * name = tape_name(STp);
1852 int cnt;
1853 int last_mark_ppos = -1;
1855 #if DEBUG
1856 printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count);
1857 #endif
1858 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
1859 #if DEBUG
1860 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name);
1861 #endif
1862 return -EIO;
1864 if (STp->linux_media_version >= 4) {
1866 * direct lookup in header filemark list
1868 cnt = ntohl(STp->buffer->aux->filemark_cnt);
1869 if (STp->header_ok &&
1870 STp->header_cache != NULL &&
1871 (cnt - mt_count) >= 0 &&
1872 (cnt - mt_count) < OS_FM_TAB_MAX &&
1873 (cnt - mt_count) < STp->filemark_cnt &&
1874 STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos)
1876 last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]);
1877 #if DEBUG
1878 if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX)
1879 printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
1880 STp->header_cache == NULL?"lack of header cache":"count out of range");
1881 else
1882 printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
1883 name, cnt,
1884 ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
1885 (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] ==
1886 STp->buffer->aux->last_mark_ppos))?"match":"error",
1887 mt_count, last_mark_ppos);
1888 #endif
1889 if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) {
1890 osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
1891 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
1892 #if DEBUG
1893 printk(OSST_DEB_MSG
1894 "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
1895 #endif
1896 return (-EIO);
1898 if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
1899 printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
1900 name, last_mark_ppos);
1901 return (-EIO);
1903 goto found;
1905 #if DEBUG
1906 printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name);
1907 #endif
1909 cnt = 0;
1910 while (cnt != mt_count) {
1911 last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos);
1912 if (last_mark_ppos == -1)
1913 return (-EIO);
1914 #if DEBUG
1915 printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos);
1916 #endif
1917 osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
1918 cnt++;
1919 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
1920 #if DEBUG
1921 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
1922 #endif
1923 return (-EIO);
1925 if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
1926 printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
1927 name, last_mark_ppos);
1928 return (-EIO);
1931 found:
1932 if (mt_op == MTBSFM) {
1933 STp->frame_seq_number++;
1934 STp->frame_in_buffer = 0;
1935 STp->buffer->buffer_bytes = 0;
1936 STp->buffer->read_pointer = 0;
1937 STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
1939 return 0;
1943 * ADRL 1.1 compatible "slow" space filemarks fwd version
1945 * Just scans for the filemark sequentially.
1947 static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt,
1948 int mt_op, int mt_count)
1950 int cnt = 0;
1951 #if DEBUG
1952 char * name = tape_name(STp);
1954 printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count);
1955 #endif
1956 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
1957 #if DEBUG
1958 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
1959 #endif
1960 return (-EIO);
1962 while (1) {
1963 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
1964 #if DEBUG
1965 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
1966 #endif
1967 return (-EIO);
1969 if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
1970 cnt++;
1971 if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
1972 #if DEBUG
1973 printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
1974 #endif
1975 if (STp->first_frame_position > STp->eod_frame_ppos+1) {
1976 #if DEBUG
1977 printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n",
1978 name, STp->eod_frame_ppos, STp->first_frame_position-1);
1979 #endif
1980 STp->eod_frame_ppos = STp->first_frame_position-1;
1982 return (-EIO);
1984 if (cnt == mt_count)
1985 break;
1986 STp->frame_in_buffer = 0;
1988 if (mt_op == MTFSF) {
1989 STp->frame_seq_number++;
1990 STp->frame_in_buffer = 0;
1991 STp->buffer->buffer_bytes = 0;
1992 STp->buffer->read_pointer = 0;
1993 STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
1995 return 0;
1999 * Fast linux specific version of OnStream FSF
2001 static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt,
2002 int mt_op, int mt_count)
2004 char * name = tape_name(STp);
2005 int cnt = 0,
2006 next_mark_ppos = -1;
2008 #if DEBUG
2009 printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count);
2010 #endif
2011 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
2012 #if DEBUG
2013 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
2014 #endif
2015 return (-EIO);
2018 if (STp->linux_media_version >= 4) {
2020 * direct lookup in header filemark list
2022 cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1;
2023 if (STp->header_ok &&
2024 STp->header_cache != NULL &&
2025 (cnt + mt_count) < OS_FM_TAB_MAX &&
2026 (cnt + mt_count) < STp->filemark_cnt &&
2027 ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
2028 (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos)))
2030 next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]);
2031 #if DEBUG
2032 if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX)
2033 printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
2034 STp->header_cache == NULL?"lack of header cache":"count out of range");
2035 else
2036 printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
2037 name, cnt,
2038 ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
2039 (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] ==
2040 STp->buffer->aux->last_mark_ppos))?"match":"error",
2041 mt_count, next_mark_ppos);
2042 #endif
2043 if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) {
2044 #if DEBUG
2045 printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
2046 #endif
2047 return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
2048 } else {
2049 osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
2050 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
2051 #if DEBUG
2052 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
2053 name);
2054 #endif
2055 return (-EIO);
2057 if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
2058 printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
2059 name, next_mark_ppos);
2060 return (-EIO);
2062 if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) {
2063 printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n",
2064 name, cnt+mt_count, next_mark_ppos,
2065 ntohl(STp->buffer->aux->filemark_cnt));
2066 return (-EIO);
2069 } else {
2071 * Find nearest (usually previous) marker, then jump from marker to marker
2073 while (1) {
2074 if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
2075 break;
2076 if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
2077 #if DEBUG
2078 printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
2079 #endif
2080 return (-EIO);
2082 if (ntohl(STp->buffer->aux->filemark_cnt) == 0) {
2083 if (STp->first_mark_ppos == -1) {
2084 #if DEBUG
2085 printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
2086 #endif
2087 return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
2089 osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos);
2090 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
2091 #if DEBUG
2092 printk(OSST_DEB_MSG
2093 "%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n",
2094 name);
2095 #endif
2096 return (-EIO);
2098 if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
2099 printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n",
2100 name, STp->first_mark_ppos);
2101 return (-EIO);
2103 } else {
2104 if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0)
2105 return (-EIO);
2106 mt_count++;
2109 cnt++;
2110 while (cnt != mt_count) {
2111 next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos);
2112 if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) {
2113 #if DEBUG
2114 printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
2115 #endif
2116 return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt);
2118 #if DEBUG
2119 else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos);
2120 #endif
2121 osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
2122 cnt++;
2123 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
2124 #if DEBUG
2125 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
2126 name);
2127 #endif
2128 return (-EIO);
2130 if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
2131 printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
2132 name, next_mark_ppos);
2133 return (-EIO);
2137 if (mt_op == MTFSF) {
2138 STp->frame_seq_number++;
2139 STp->frame_in_buffer = 0;
2140 STp->buffer->buffer_bytes = 0;
2141 STp->buffer->read_pointer = 0;
2142 STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
2144 return 0;
2148 * In debug mode, we want to see as many errors as possible
2149 * to test the error recovery mechanism.
2151 #if DEBUG
2152 static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries)
2154 unsigned char cmd[MAX_COMMAND_SIZE];
2155 struct osst_request * SRpnt = * aSRpnt;
2156 char * name = tape_name(STp);
2158 memset(cmd, 0, MAX_COMMAND_SIZE);
2159 cmd[0] = MODE_SELECT;
2160 cmd[1] = 0x10;
2161 cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
2163 (STp->buffer)->b_data[0] = cmd[4] - 1;
2164 (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */
2165 (STp->buffer)->b_data[2] = 0; /* Reserved */
2166 (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */
2167 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7);
2168 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2;
2169 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4;
2170 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries;
2172 if (debugging)
2173 printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries);
2175 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
2176 *aSRpnt = SRpnt;
2178 if ((STp->buffer)->syscall_result)
2179 printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries);
2181 #endif
2184 static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt)
2186 int result;
2187 int this_mark_ppos = STp->first_frame_position;
2188 int this_mark_lbn = STp->logical_blk_num;
2189 #if DEBUG
2190 char * name = tape_name(STp);
2191 #endif
2193 if (STp->raw) return 0;
2195 STp->write_type = OS_WRITE_NEW_MARK;
2196 #if DEBUG
2197 printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n",
2198 name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn);
2199 #endif
2200 STp->dirty = 1;
2201 result = osst_flush_write_buffer(STp, aSRpnt);
2202 result |= osst_flush_drive_buffer(STp, aSRpnt);
2203 STp->last_mark_ppos = this_mark_ppos;
2204 STp->last_mark_lbn = this_mark_lbn;
2205 if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX)
2206 STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos);
2207 if (STp->filemark_cnt++ == 0)
2208 STp->first_mark_ppos = this_mark_ppos;
2209 return result;
2212 static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt)
2214 int result;
2215 #if DEBUG
2216 char * name = tape_name(STp);
2217 #endif
2219 if (STp->raw) return 0;
2221 STp->write_type = OS_WRITE_EOD;
2222 STp->eod_frame_ppos = STp->first_frame_position;
2223 #if DEBUG
2224 printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name,
2225 STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num);
2226 #endif
2227 STp->dirty = 1;
2229 result = osst_flush_write_buffer(STp, aSRpnt);
2230 result |= osst_flush_drive_buffer(STp, aSRpnt);
2231 STp->eod_frame_lfa = --(STp->frame_seq_number);
2232 return result;
2235 static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
2237 char * name = tape_name(STp);
2239 #if DEBUG
2240 printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where);
2241 #endif
2242 osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
2243 osst_set_frame_position(STp, aSRpnt, where, 0);
2244 STp->write_type = OS_WRITE_FILLER;
2245 while (count--) {
2246 memcpy(STp->buffer->b_data, "Filler", 6);
2247 STp->buffer->buffer_bytes = 6;
2248 STp->dirty = 1;
2249 if (osst_flush_write_buffer(STp, aSRpnt)) {
2250 printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name);
2251 return (-EIO);
2254 #if DEBUG
2255 printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name);
2256 #endif
2257 return osst_flush_drive_buffer(STp, aSRpnt);
2260 static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
2262 char * name = tape_name(STp);
2263 int result;
2265 #if DEBUG
2266 printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where);
2267 #endif
2268 osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
2269 osst_set_frame_position(STp, aSRpnt, where, 0);
2270 STp->write_type = OS_WRITE_HEADER;
2271 while (count--) {
2272 osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache);
2273 STp->buffer->buffer_bytes = sizeof(os_header_t);
2274 STp->dirty = 1;
2275 if (osst_flush_write_buffer(STp, aSRpnt)) {
2276 printk(KERN_INFO "%s:I: Couldn't write header frame\n", name);
2277 return (-EIO);
2280 result = osst_flush_drive_buffer(STp, aSRpnt);
2281 #if DEBUG
2282 printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done");
2283 #endif
2284 return result;
2287 static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod)
2289 os_header_t * header;
2290 int result;
2291 char * name = tape_name(STp);
2293 #if DEBUG
2294 printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name);
2295 #endif
2296 if (STp->raw) return 0;
2298 if (STp->header_cache == NULL) {
2299 if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) {
2300 printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
2301 return (-ENOMEM);
2303 memset(STp->header_cache, 0, sizeof(os_header_t));
2304 #if DEBUG
2305 printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name);
2306 #endif
2308 if (STp->header_ok) STp->update_frame_cntr++;
2309 else STp->update_frame_cntr = 0;
2311 header = STp->header_cache;
2312 strcpy(header->ident_str, "ADR_SEQ");
2313 header->major_rev = 1;
2314 header->minor_rev = 4;
2315 header->ext_trk_tb_off = htons(17192);
2316 header->pt_par_num = 1;
2317 header->partition[0].partition_num = OS_DATA_PARTITION;
2318 header->partition[0].par_desc_ver = OS_PARTITION_VERSION;
2319 header->partition[0].wrt_pass_cntr = htons(STp->wrt_pass_cntr);
2320 header->partition[0].first_frame_ppos = htonl(STp->first_data_ppos);
2321 header->partition[0].last_frame_ppos = htonl(STp->capacity);
2322 header->partition[0].eod_frame_ppos = htonl(STp->eod_frame_ppos);
2323 header->cfg_col_width = htonl(20);
2324 header->dat_col_width = htonl(1500);
2325 header->qfa_col_width = htonl(0);
2326 header->ext_track_tb.nr_stream_part = 1;
2327 header->ext_track_tb.et_ent_sz = 32;
2328 header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0;
2329 header->ext_track_tb.dat_ext_trk_ey.fmt = 1;
2330 header->ext_track_tb.dat_ext_trk_ey.fm_tab_off = htons(17736);
2331 header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0;
2332 header->ext_track_tb.dat_ext_trk_ey.last_hlb = htonl(STp->eod_frame_lfa);
2333 header->ext_track_tb.dat_ext_trk_ey.last_pp = htonl(STp->eod_frame_ppos);
2334 header->dat_fm_tab.fm_part_num = 0;
2335 header->dat_fm_tab.fm_tab_ent_sz = 4;
2336 header->dat_fm_tab.fm_tab_ent_cnt = htons(STp->filemark_cnt<OS_FM_TAB_MAX?
2337 STp->filemark_cnt:OS_FM_TAB_MAX);
2339 result = __osst_write_header(STp, aSRpnt, 0xbae, 5);
2340 if (STp->update_frame_cntr == 0)
2341 osst_write_filler(STp, aSRpnt, 0xbb3, 5);
2342 result &= __osst_write_header(STp, aSRpnt, 5, 5);
2344 if (locate_eod) {
2345 #if DEBUG
2346 printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos);
2347 #endif
2348 osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0);
2350 if (result)
2351 printk(KERN_ERR "%s:E: Write header failed\n", name);
2352 else {
2353 memcpy(STp->application_sig, "LIN4", 4);
2354 STp->linux_media = 1;
2355 STp->linux_media_version = 4;
2356 STp->header_ok = 1;
2358 return result;
2361 static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt)
2363 if (STp->header_cache != NULL)
2364 memset(STp->header_cache, 0, sizeof(os_header_t));
2366 STp->logical_blk_num = STp->frame_seq_number = 0;
2367 STp->frame_in_buffer = 0;
2368 STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A;
2369 STp->filemark_cnt = 0;
2370 STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
2371 return osst_write_header(STp, aSRpnt, 1);
2374 static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos)
2376 char * name = tape_name(STp);
2377 os_header_t * header;
2378 os_aux_t * aux;
2379 char id_string[8];
2380 int linux_media_version,
2381 update_frame_cntr;
2383 if (STp->raw)
2384 return 1;
2386 if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) {
2387 if (osst_set_frame_position(STp, aSRpnt, ppos, 0))
2388 printk(KERN_WARNING "%s:W: Couldn't position tape\n", name);
2389 osst_wait_ready(STp, aSRpnt, 60 * 15, 0);
2390 if (osst_initiate_read (STp, aSRpnt)) {
2391 printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name);
2392 return 0;
2395 if (osst_read_frame(STp, aSRpnt, 180)) {
2396 #if DEBUG
2397 printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name);
2398 #endif
2399 return 0;
2401 header = (os_header_t *) STp->buffer->b_data; /* warning: only first segment addressable */
2402 aux = STp->buffer->aux;
2403 if (aux->frame_type != OS_FRAME_TYPE_HEADER) {
2404 #if DEBUG
2405 printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos);
2406 #endif
2407 return 0;
2409 if (ntohl(aux->frame_seq_num) != 0 ||
2410 ntohl(aux->logical_blk_num) != 0 ||
2411 aux->partition.partition_num != OS_CONFIG_PARTITION ||
2412 ntohl(aux->partition.first_frame_ppos) != 0 ||
2413 ntohl(aux->partition.last_frame_ppos) != 0xbb7 ) {
2414 #if DEBUG
2415 printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name,
2416 ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
2417 aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos),
2418 ntohl(aux->partition.last_frame_ppos));
2419 #endif
2420 return 0;
2422 if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 &&
2423 strncmp(header->ident_str, "ADR-SEQ", 7) != 0) {
2424 strlcpy(id_string, header->ident_str, 8);
2425 #if DEBUG
2426 printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string);
2427 #endif
2428 return 0;
2430 update_frame_cntr = ntohl(aux->update_frame_cntr);
2431 if (update_frame_cntr < STp->update_frame_cntr) {
2432 #if DEBUG
2433 printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n",
2434 name, ppos, update_frame_cntr, STp->update_frame_cntr);
2435 #endif
2436 return 0;
2438 if (header->major_rev != 1 || header->minor_rev != 4 ) {
2439 #if DEBUG
2440 printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n",
2441 name, (header->major_rev != 1 || header->minor_rev < 2 ||
2442 header->minor_rev > 4 )? "Invalid" : "Warning:",
2443 header->major_rev, header->minor_rev);
2444 #endif
2445 if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4)
2446 return 0;
2448 #if DEBUG
2449 if (header->pt_par_num != 1)
2450 printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n",
2451 name, header->pt_par_num);
2452 #endif
2453 memcpy(id_string, aux->application_sig, 4);
2454 id_string[4] = 0;
2455 if (memcmp(id_string, "LIN", 3) == 0) {
2456 STp->linux_media = 1;
2457 linux_media_version = id_string[3] - '0';
2458 if (linux_media_version != 4)
2459 printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n",
2460 name, linux_media_version);
2461 } else {
2462 printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string);
2463 return 0;
2465 if (linux_media_version < STp->linux_media_version) {
2466 #if DEBUG
2467 printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n",
2468 name, ppos, linux_media_version);
2469 #endif
2470 return 0;
2472 if (linux_media_version > STp->linux_media_version) {
2473 #if DEBUG
2474 printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n",
2475 name, ppos, linux_media_version);
2476 #endif
2477 memcpy(STp->application_sig, id_string, 5);
2478 STp->linux_media_version = linux_media_version;
2479 STp->update_frame_cntr = -1;
2481 if (update_frame_cntr > STp->update_frame_cntr) {
2482 #if DEBUG
2483 printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n",
2484 name, ppos, update_frame_cntr);
2485 #endif
2486 if (STp->header_cache == NULL) {
2487 if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) {
2488 printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
2489 return 0;
2491 #if DEBUG
2492 printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name);
2493 #endif
2495 osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache);
2496 header = STp->header_cache; /* further accesses from cached (full) copy */
2498 STp->wrt_pass_cntr = ntohs(header->partition[0].wrt_pass_cntr);
2499 STp->first_data_ppos = ntohl(header->partition[0].first_frame_ppos);
2500 STp->eod_frame_ppos = ntohl(header->partition[0].eod_frame_ppos);
2501 STp->eod_frame_lfa = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb);
2502 STp->filemark_cnt = ntohl(aux->filemark_cnt);
2503 STp->first_mark_ppos = ntohl(aux->next_mark_ppos);
2504 STp->last_mark_ppos = ntohl(aux->last_mark_ppos);
2505 STp->last_mark_lbn = ntohl(aux->last_mark_lbn);
2506 STp->update_frame_cntr = update_frame_cntr;
2507 #if DEBUG
2508 printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n",
2509 name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt);
2510 printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name,
2511 STp->first_data_ppos,
2512 ntohl(header->partition[0].last_frame_ppos),
2513 ntohl(header->partition[0].eod_frame_ppos));
2514 printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n",
2515 name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos);
2516 #endif
2517 if (header->minor_rev < 4 && STp->linux_media_version == 4) {
2518 #if DEBUG
2519 printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name);
2520 #endif
2521 memcpy((void *)header->dat_fm_tab.fm_tab_ent,
2522 (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent));
2523 memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list));
2525 if (header->minor_rev == 4 &&
2526 (header->ext_trk_tb_off != htons(17192) ||
2527 header->partition[0].partition_num != OS_DATA_PARTITION ||
2528 header->partition[0].par_desc_ver != OS_PARTITION_VERSION ||
2529 header->partition[0].last_frame_ppos != htonl(STp->capacity) ||
2530 header->cfg_col_width != htonl(20) ||
2531 header->dat_col_width != htonl(1500) ||
2532 header->qfa_col_width != htonl(0) ||
2533 header->ext_track_tb.nr_stream_part != 1 ||
2534 header->ext_track_tb.et_ent_sz != 32 ||
2535 header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION ||
2536 header->ext_track_tb.dat_ext_trk_ey.fmt != 1 ||
2537 header->ext_track_tb.dat_ext_trk_ey.fm_tab_off != htons(17736) ||
2538 header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0 ||
2539 header->ext_track_tb.dat_ext_trk_ey.last_pp != htonl(STp->eod_frame_ppos) ||
2540 header->dat_fm_tab.fm_part_num != OS_DATA_PARTITION ||
2541 header->dat_fm_tab.fm_tab_ent_sz != 4 ||
2542 header->dat_fm_tab.fm_tab_ent_cnt !=
2543 htons(STp->filemark_cnt<OS_FM_TAB_MAX?STp->filemark_cnt:OS_FM_TAB_MAX)))
2544 printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name);
2548 return 1;
2551 static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt)
2553 int position, ppos;
2554 int first, last;
2555 int valid = 0;
2556 char * name = tape_name(STp);
2558 position = osst_get_frame_position(STp, aSRpnt);
2560 if (STp->raw) {
2561 STp->header_ok = STp->linux_media = 1;
2562 STp->linux_media_version = 0;
2563 return 1;
2565 STp->header_ok = STp->linux_media = STp->linux_media_version = 0;
2566 STp->wrt_pass_cntr = STp->update_frame_cntr = -1;
2567 STp->eod_frame_ppos = STp->first_data_ppos = -1;
2568 STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
2569 #if DEBUG
2570 printk(OSST_DEB_MSG "%s:D: Reading header\n", name);
2571 #endif
2573 /* optimization for speed - if we are positioned at ppos 10, read second group first */
2574 /* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */
2576 first = position==10?0xbae: 5;
2577 last = position==10?0xbb3:10;
2579 for (ppos = first; ppos < last; ppos++)
2580 if (__osst_analyze_headers(STp, aSRpnt, ppos))
2581 valid = 1;
2583 first = position==10? 5:0xbae;
2584 last = position==10?10:0xbb3;
2586 for (ppos = first; ppos < last; ppos++)
2587 if (__osst_analyze_headers(STp, aSRpnt, ppos))
2588 valid = 1;
2590 if (!valid) {
2591 printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name);
2592 STp->eod_frame_ppos = STp->first_data_ppos = 0;
2593 osst_set_frame_position(STp, aSRpnt, 10, 0);
2594 return 0;
2596 if (position <= STp->first_data_ppos) {
2597 position = STp->first_data_ppos;
2598 STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
2600 osst_set_frame_position(STp, aSRpnt, position, 0);
2601 STp->header_ok = 1;
2603 return 1;
2606 static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt)
2608 int frame_position = STp->first_frame_position;
2609 int frame_seq_numbr = STp->frame_seq_number;
2610 int logical_blk_num = STp->logical_blk_num;
2611 int halfway_frame = STp->frame_in_buffer;
2612 int read_pointer = STp->buffer->read_pointer;
2613 int prev_mark_ppos = -1;
2614 int actual_mark_ppos, i, n;
2615 #if DEBUG
2616 char * name = tape_name(STp);
2618 printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name);
2619 #endif
2620 osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
2621 if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
2622 #if DEBUG
2623 printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name);
2624 #endif
2625 return (-EIO);
2627 if (STp->linux_media_version >= 4) {
2628 for (i=0; i<STp->filemark_cnt; i++)
2629 if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position)
2630 prev_mark_ppos = n;
2631 } else
2632 prev_mark_ppos = frame_position - 1; /* usually - we don't really know */
2633 actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ?
2634 frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos);
2635 if (frame_position != STp->first_frame_position ||
2636 frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) ||
2637 prev_mark_ppos != actual_mark_ppos ) {
2638 #if DEBUG
2639 printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name,
2640 STp->first_frame_position, frame_position,
2641 STp->frame_seq_number + (halfway_frame?0:1),
2642 frame_seq_numbr, actual_mark_ppos, prev_mark_ppos);
2643 #endif
2644 return (-EIO);
2646 if (halfway_frame) {
2647 /* prepare buffer for append and rewrite on top of original */
2648 osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
2649 STp->buffer->buffer_bytes = read_pointer;
2650 STp->ps[STp->partition].rw = ST_WRITING;
2651 STp->dirty = 1;
2653 STp->frame_in_buffer = halfway_frame;
2654 STp->frame_seq_number = frame_seq_numbr;
2655 STp->logical_blk_num = logical_blk_num;
2656 return 0;
2659 /* Acc. to OnStream, the vers. numbering is the following:
2660 * X.XX for released versions (X=digit),
2661 * XXXY for unreleased versions (Y=letter)
2662 * Ordering 1.05 < 106A < 106B < ... < 106a < ... < 1.06
2663 * This fn makes monoton numbers out of this scheme ...
2665 static unsigned int osst_parse_firmware_rev (const char * str)
2667 if (str[1] == '.') {
2668 return (str[0]-'0')*10000
2669 +(str[2]-'0')*1000
2670 +(str[3]-'0')*100;
2671 } else {
2672 return (str[0]-'0')*10000
2673 +(str[1]-'0')*1000
2674 +(str[2]-'0')*100 - 100
2675 +(str[3]-'@');
2680 * Configure the OnStream SCII tape drive for default operation
2682 static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt)
2684 unsigned char cmd[MAX_COMMAND_SIZE];
2685 char * name = tape_name(STp);
2686 struct osst_request * SRpnt = * aSRpnt;
2687 osst_mode_parameter_header_t * header;
2688 osst_block_size_page_t * bs;
2689 osst_capabilities_page_t * cp;
2690 osst_tape_paramtr_page_t * prm;
2691 int drive_buffer_size;
2693 if (STp->ready != ST_READY) {
2694 #if DEBUG
2695 printk(OSST_DEB_MSG "%s:D: Not Ready\n", name);
2696 #endif
2697 return (-EIO);
2700 if (STp->os_fw_rev < 10600) {
2701 printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev);
2702 printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name);
2706 * Configure 32.5KB (data+aux) frame size.
2707 * Get the current frame size from the block size mode page
2709 memset(cmd, 0, MAX_COMMAND_SIZE);
2710 cmd[0] = MODE_SENSE;
2711 cmd[1] = 8;
2712 cmd[2] = BLOCK_SIZE_PAGE;
2713 cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
2715 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
2716 if (SRpnt == NULL) {
2717 #if DEBUG
2718 printk(OSST_DEB_MSG "osst :D: Busy\n");
2719 #endif
2720 return (-EBUSY);
2722 *aSRpnt = SRpnt;
2723 if ((STp->buffer)->syscall_result != 0) {
2724 printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name);
2725 return (-EIO);
2728 header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
2729 bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl);
2731 #if DEBUG
2732 printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n", name, bs->play32 ? "Yes" : "No");
2733 printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5 ? "Yes" : "No");
2734 printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n", name, bs->record32 ? "Yes" : "No");
2735 printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n", name, bs->record32_5 ? "Yes" : "No");
2736 #endif
2739 * Configure default auto columns mode, 32.5KB transfer mode
2741 bs->one = 1;
2742 bs->play32 = 0;
2743 bs->play32_5 = 1;
2744 bs->record32 = 0;
2745 bs->record32_5 = 1;
2747 memset(cmd, 0, MAX_COMMAND_SIZE);
2748 cmd[0] = MODE_SELECT;
2749 cmd[1] = 0x10;
2750 cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
2752 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
2753 *aSRpnt = SRpnt;
2754 if ((STp->buffer)->syscall_result != 0) {
2755 printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name);
2756 return (-EIO);
2759 #if DEBUG
2760 printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name);
2762 * In debug mode, we want to see as many errors as possible
2763 * to test the error recovery mechanism.
2765 osst_set_retries(STp, aSRpnt, 0);
2766 SRpnt = * aSRpnt;
2767 #endif
2770 * Set vendor name to 'LIN4' for "Linux support version 4".
2773 memset(cmd, 0, MAX_COMMAND_SIZE);
2774 cmd[0] = MODE_SELECT;
2775 cmd[1] = 0x10;
2776 cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
2778 header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1;
2779 header->medium_type = 0; /* Medium Type - ignoring */
2780 header->dsp = 0; /* Reserved */
2781 header->bdl = 0; /* Block Descriptor Length */
2783 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7);
2784 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6;
2785 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L';
2786 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I';
2787 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N';
2788 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4';
2789 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0;
2790 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0;
2792 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
2793 *aSRpnt = SRpnt;
2795 if ((STp->buffer)->syscall_result != 0) {
2796 printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name,
2797 (char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2));
2798 return (-EIO);
2801 memset(cmd, 0, MAX_COMMAND_SIZE);
2802 cmd[0] = MODE_SENSE;
2803 cmd[1] = 8;
2804 cmd[2] = CAPABILITIES_PAGE;
2805 cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
2807 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
2808 *aSRpnt = SRpnt;
2810 if ((STp->buffer)->syscall_result != 0) {
2811 printk (KERN_ERR "%s:E: Can't get capabilities page\n", name);
2812 return (-EIO);
2815 header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
2816 cp = (osst_capabilities_page_t *) ((STp->buffer)->b_data +
2817 sizeof(osst_mode_parameter_header_t) + header->bdl);
2819 drive_buffer_size = ntohs(cp->buffer_size) / 2;
2821 memset(cmd, 0, MAX_COMMAND_SIZE);
2822 cmd[0] = MODE_SENSE;
2823 cmd[1] = 8;
2824 cmd[2] = TAPE_PARAMTR_PAGE;
2825 cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH;
2827 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
2828 *aSRpnt = SRpnt;
2830 if ((STp->buffer)->syscall_result != 0) {
2831 printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name);
2832 return (-EIO);
2835 header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
2836 prm = (osst_tape_paramtr_page_t *) ((STp->buffer)->b_data +
2837 sizeof(osst_mode_parameter_header_t) + header->bdl);
2839 STp->density = prm->density;
2840 STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks);
2841 #if DEBUG
2842 printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n",
2843 name, STp->density, STp->capacity / 32, drive_buffer_size);
2844 #endif
2846 return 0;
2851 /* Step over EOF if it has been inadvertently crossed (ioctl not used because
2852 it messes up the block number). */
2853 static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward)
2855 int result;
2856 char * name = tape_name(STp);
2858 #if DEBUG
2859 if (debugging)
2860 printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n",
2861 name, forward ? "forward" : "backward");
2862 #endif
2864 if (forward) {
2865 /* assumes that the filemark is already read by the drive, so this is low cost */
2866 result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1);
2868 else
2869 /* assumes this is only called if we just read the filemark! */
2870 result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1);
2872 if (result < 0)
2873 printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n",
2874 name, forward ? "forward" : "backward");
2876 return result;
2880 /* Get the tape position. */
2882 static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt)
2884 unsigned char scmd[MAX_COMMAND_SIZE];
2885 struct osst_request * SRpnt;
2886 int result = 0;
2887 char * name = tape_name(STp);
2889 /* KG: We want to be able to use it for checking Write Buffer availability
2890 * and thus don't want to risk to overwrite anything. Exchange buffers ... */
2891 char mybuf[24];
2892 char * olddata = STp->buffer->b_data;
2893 int oldsize = STp->buffer->buffer_size;
2895 if (STp->ready != ST_READY) return (-EIO);
2897 memset (scmd, 0, MAX_COMMAND_SIZE);
2898 scmd[0] = READ_POSITION;
2900 STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
2901 SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
2902 STp->timeout, MAX_RETRIES, 1);
2903 if (!SRpnt) {
2904 STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
2905 return (-EBUSY);
2907 *aSRpnt = SRpnt;
2909 if (STp->buffer->syscall_result)
2910 result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL; /* 3: Write Error */
2912 if (result == -EINVAL)
2913 printk(KERN_ERR "%s:E: Can't read tape position.\n", name);
2914 else {
2915 if (result == -EIO) { /* re-read position - this needs to preserve media errors */
2916 unsigned char mysense[16];
2917 memcpy (mysense, SRpnt->sense, 16);
2918 memset (scmd, 0, MAX_COMMAND_SIZE);
2919 scmd[0] = READ_POSITION;
2920 STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
2921 SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
2922 STp->timeout, MAX_RETRIES, 1);
2923 #if DEBUG
2924 printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n",
2925 name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:",
2926 SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]);
2927 #endif
2928 if (!STp->buffer->syscall_result)
2929 memcpy (SRpnt->sense, mysense, 16);
2930 else
2931 printk(KERN_WARNING "%s:W: Double error in get position\n", name);
2933 STp->first_frame_position = ((STp->buffer)->b_data[4] << 24)
2934 + ((STp->buffer)->b_data[5] << 16)
2935 + ((STp->buffer)->b_data[6] << 8)
2936 + (STp->buffer)->b_data[7];
2937 STp->last_frame_position = ((STp->buffer)->b_data[ 8] << 24)
2938 + ((STp->buffer)->b_data[ 9] << 16)
2939 + ((STp->buffer)->b_data[10] << 8)
2940 + (STp->buffer)->b_data[11];
2941 STp->cur_frames = (STp->buffer)->b_data[15];
2942 #if DEBUG
2943 if (debugging) {
2944 printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name,
2945 STp->first_frame_position, STp->last_frame_position,
2946 ((STp->buffer)->b_data[0]&0x80)?" (BOP)":
2947 ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"",
2948 STp->cur_frames);
2950 #endif
2951 if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) {
2952 #if DEBUG
2953 printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name,
2954 STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
2955 #endif
2956 STp->first_frame_position = STp->last_frame_position;
2959 STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
2961 return (result == 0 ? STp->first_frame_position : result);
2965 /* Set the tape block */
2966 static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip)
2968 unsigned char scmd[MAX_COMMAND_SIZE];
2969 struct osst_request * SRpnt;
2970 struct st_partstat * STps;
2971 int result = 0;
2972 int pp = (ppos == 3000 && !skip)? 0 : ppos;
2973 char * name = tape_name(STp);
2975 if (STp->ready != ST_READY) return (-EIO);
2977 STps = &(STp->ps[STp->partition]);
2979 if (ppos < 0 || ppos > STp->capacity) {
2980 printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos);
2981 pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1);
2982 result = (-EINVAL);
2985 do {
2986 #if DEBUG
2987 if (debugging)
2988 printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp);
2989 #endif
2990 memset (scmd, 0, MAX_COMMAND_SIZE);
2991 scmd[0] = SEEK_10;
2992 scmd[1] = 1;
2993 scmd[3] = (pp >> 24);
2994 scmd[4] = (pp >> 16);
2995 scmd[5] = (pp >> 8);
2996 scmd[6] = pp;
2997 if (skip)
2998 scmd[9] = 0x80;
3000 SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout,
3001 MAX_RETRIES, 1);
3002 if (!SRpnt)
3003 return (-EBUSY);
3004 *aSRpnt = SRpnt;
3006 if ((STp->buffer)->syscall_result != 0) {
3007 #if DEBUG
3008 printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n",
3009 name, STp->first_frame_position, pp);
3010 #endif
3011 result = (-EIO);
3013 if (pp != ppos)
3014 osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
3015 } while ((pp != ppos) && (pp = ppos));
3016 STp->first_frame_position = STp->last_frame_position = ppos;
3017 STps->eof = ST_NOEOF;
3018 STps->at_sm = 0;
3019 STps->rw = ST_IDLE;
3020 STp->frame_in_buffer = 0;
3021 return result;
3024 static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT)
3026 struct st_partstat * STps = &(STp->ps[STp->partition]);
3027 int result = 0;
3029 if (STp->write_type != OS_WRITE_NEW_MARK) {
3030 /* true unless the user wrote the filemark for us */
3031 result = osst_flush_drive_buffer(STp, aSRpnt);
3032 if (result < 0) goto out;
3033 result = osst_write_filemark(STp, aSRpnt);
3034 if (result < 0) goto out;
3036 if (STps->drv_file >= 0)
3037 STps->drv_file++ ;
3038 STps->drv_block = 0;
3040 result = osst_write_eod(STp, aSRpnt);
3041 osst_write_header(STp, aSRpnt, leave_at_EOT);
3043 STps->eof = ST_FM;
3044 out:
3045 return result;
3048 /* osst versions of st functions - augmented and stripped to suit OnStream only */
3050 /* Flush the write buffer (never need to write if variable blocksize). */
3051 static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt)
3053 int offset, transfer, blks = 0;
3054 int result = 0;
3055 unsigned char cmd[MAX_COMMAND_SIZE];
3056 struct osst_request * SRpnt = *aSRpnt;
3057 struct st_partstat * STps;
3058 char * name = tape_name(STp);
3060 if ((STp->buffer)->writing) {
3061 if (SRpnt == (STp->buffer)->last_SRpnt)
3062 #if DEBUG
3063 { printk(OSST_DEB_MSG
3064 "%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name);
3065 #endif
3066 *aSRpnt = SRpnt = NULL;
3067 #if DEBUG
3068 } else if (SRpnt)
3069 printk(OSST_DEB_MSG
3070 "%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name);
3071 #endif
3072 osst_write_behind_check(STp);
3073 if ((STp->buffer)->syscall_result) {
3074 #if DEBUG
3075 if (debugging)
3076 printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n",
3077 name, (STp->buffer)->midlevel_result);
3078 #endif
3079 if ((STp->buffer)->midlevel_result == INT_MAX)
3080 return (-ENOSPC);
3081 return (-EIO);
3085 result = 0;
3086 if (STp->dirty == 1) {
3088 STp->write_count++;
3089 STps = &(STp->ps[STp->partition]);
3090 STps->rw = ST_WRITING;
3091 offset = STp->buffer->buffer_bytes;
3092 blks = (offset + STp->block_size - 1) / STp->block_size;
3093 transfer = OS_FRAME_SIZE;
3095 if (offset < OS_DATA_SIZE)
3096 osst_zero_buffer_tail(STp->buffer);
3098 if (STp->poll)
3099 if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120))
3100 result = osst_recover_wait_frame(STp, aSRpnt, 1);
3102 memset(cmd, 0, MAX_COMMAND_SIZE);
3103 cmd[0] = WRITE_6;
3104 cmd[1] = 1;
3105 cmd[4] = 1;
3107 switch (STp->write_type) {
3108 case OS_WRITE_DATA:
3109 #if DEBUG
3110 if (debugging)
3111 printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n",
3112 name, blks, STp->frame_seq_number,
3113 STp->logical_blk_num - blks, STp->logical_blk_num - 1);
3114 #endif
3115 osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
3116 STp->logical_blk_num - blks, STp->block_size, blks);
3117 break;
3118 case OS_WRITE_EOD:
3119 osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++,
3120 STp->logical_blk_num, 0, 0);
3121 break;
3122 case OS_WRITE_NEW_MARK:
3123 osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++,
3124 STp->logical_blk_num++, 0, blks=1);
3125 break;
3126 case OS_WRITE_HEADER:
3127 osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0);
3128 break;
3129 default: /* probably FILLER */
3130 osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0);
3132 #if DEBUG
3133 if (debugging)
3134 printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n",
3135 name, offset, transfer, blks);
3136 #endif
3138 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
3139 STp->timeout, MAX_RETRIES, 1);
3140 *aSRpnt = SRpnt;
3141 if (!SRpnt)
3142 return (-EBUSY);
3144 if ((STp->buffer)->syscall_result != 0) {
3145 #if DEBUG
3146 printk(OSST_DEB_MSG
3147 "%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n",
3148 name, SRpnt->sense[0], SRpnt->sense[2],
3149 SRpnt->sense[12], SRpnt->sense[13]);
3150 #endif
3151 if ((SRpnt->sense[0] & 0x70) == 0x70 &&
3152 (SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */
3153 (SRpnt->sense[2] & 0x0f) == NO_SENSE) {
3154 STp->dirty = 0;
3155 (STp->buffer)->buffer_bytes = 0;
3156 result = (-ENOSPC);
3158 else {
3159 if (osst_write_error_recovery(STp, aSRpnt, 1)) {
3160 printk(KERN_ERR "%s:E: Error on flush write.\n", name);
3161 result = (-EIO);
3164 STps->drv_block = (-1); /* FIXME - even if write recovery succeeds? */
3166 else {
3167 STp->first_frame_position++;
3168 STp->dirty = 0;
3169 (STp->buffer)->buffer_bytes = 0;
3172 #if DEBUG
3173 printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result);
3174 #endif
3175 return result;
3179 /* Flush the tape buffer. The tape will be positioned correctly unless
3180 seek_next is true. */
3181 static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next)
3183 struct st_partstat * STps;
3184 int backspace = 0, result = 0;
3185 #if DEBUG
3186 char * name = tape_name(STp);
3187 #endif
3190 * If there was a bus reset, block further access
3191 * to this device.
3193 if( STp->pos_unknown)
3194 return (-EIO);
3196 if (STp->ready != ST_READY)
3197 return 0;
3199 STps = &(STp->ps[STp->partition]);
3200 if (STps->rw == ST_WRITING || STp->dirty) { /* Writing */
3201 STp->write_type = OS_WRITE_DATA;
3202 return osst_flush_write_buffer(STp, aSRpnt);
3204 if (STp->block_size == 0)
3205 return 0;
3207 #if DEBUG
3208 printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name);
3209 #endif
3211 if (!STp->can_bsr) {
3212 backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size -
3213 ((STp->buffer)->read_pointer + STp->block_size - 1 ) / STp->block_size ;
3214 (STp->buffer)->buffer_bytes = 0;
3215 (STp->buffer)->read_pointer = 0;
3216 STp->frame_in_buffer = 0; /* FIXME is this relevant w. OSST? */
3219 if (!seek_next) {
3220 if (STps->eof == ST_FM_HIT) {
3221 result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */
3222 if (!result)
3223 STps->eof = ST_NOEOF;
3224 else {
3225 if (STps->drv_file >= 0)
3226 STps->drv_file++;
3227 STps->drv_block = 0;
3230 if (!result && backspace > 0) /* TODO -- design and run a test case for this */
3231 result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace);
3233 else if (STps->eof == ST_FM_HIT) {
3234 if (STps->drv_file >= 0)
3235 STps->drv_file++;
3236 STps->drv_block = 0;
3237 STps->eof = ST_NOEOF;
3240 return result;
3243 static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous)
3245 unsigned char cmd[MAX_COMMAND_SIZE];
3246 struct osst_request * SRpnt;
3247 int blks;
3248 #if DEBUG
3249 char * name = tape_name(STp);
3250 #endif
3252 if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */
3253 #if DEBUG
3254 printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name);
3255 #endif
3256 if (osst_flush_drive_buffer(STp, aSRpnt) < 0) {
3257 return (-EIO);
3259 /* error recovery may have bumped us past the header partition */
3260 if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) {
3261 #if DEBUG
3262 printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name);
3263 #endif
3264 osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8);
3268 if (STp->poll)
3269 if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120))
3270 if (osst_recover_wait_frame(STp, aSRpnt, 1))
3271 return (-EIO);
3273 // osst_build_stats(STp, &SRpnt);
3275 STp->ps[STp->partition].rw = ST_WRITING;
3276 STp->write_type = OS_WRITE_DATA;
3278 memset(cmd, 0, MAX_COMMAND_SIZE);
3279 cmd[0] = WRITE_6;
3280 cmd[1] = 1;
3281 cmd[4] = 1; /* one frame at a time... */
3282 blks = STp->buffer->buffer_bytes / STp->block_size;
3283 #if DEBUG
3284 if (debugging)
3285 printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks,
3286 STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1);
3287 #endif
3288 osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
3289 STp->logical_blk_num - blks, STp->block_size, blks);
3291 #if DEBUG
3292 if (!synchronous)
3293 STp->write_pending = 1;
3294 #endif
3295 SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout,
3296 MAX_RETRIES, synchronous);
3297 if (!SRpnt)
3298 return (-EBUSY);
3299 *aSRpnt = SRpnt;
3301 if (synchronous) {
3302 if (STp->buffer->syscall_result != 0) {
3303 #if DEBUG
3304 if (debugging)
3305 printk(OSST_DEB_MSG "%s:D: Error on write:\n", name);
3306 #endif
3307 if ((SRpnt->sense[0] & 0x70) == 0x70 &&
3308 (SRpnt->sense[2] & 0x40)) {
3309 if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW)
3310 return (-ENOSPC);
3312 else {
3313 if (osst_write_error_recovery(STp, aSRpnt, 1))
3314 return (-EIO);
3317 else
3318 STp->first_frame_position++;
3321 STp->write_count++;
3323 return 0;
3326 /* Lock or unlock the drive door. Don't use when struct osst_request allocated. */
3327 static int do_door_lock(struct osst_tape * STp, int do_lock)
3329 int retval, cmd;
3331 cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
3332 #if DEBUG
3333 printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl");
3334 #endif
3335 retval = scsi_ioctl(STp->device, cmd, NULL);
3336 if (!retval) {
3337 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
3339 else {
3340 STp->door_locked = ST_LOCK_FAILS;
3342 return retval;
3345 /* Set the internal state after reset */
3346 static void reset_state(struct osst_tape *STp)
3348 int i;
3349 struct st_partstat *STps;
3351 STp->pos_unknown = 0;
3352 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3353 STps = &(STp->ps[i]);
3354 STps->rw = ST_IDLE;
3355 STps->eof = ST_NOEOF;
3356 STps->at_sm = 0;
3357 STps->last_block_valid = 0;
3358 STps->drv_block = -1;
3359 STps->drv_file = -1;
3364 /* Entry points to osst */
3366 /* Write command */
3367 static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos)
3369 ssize_t total, retval = 0;
3370 ssize_t i, do_count, blks, transfer;
3371 int write_threshold;
3372 int doing_write = 0;
3373 const char __user * b_point;
3374 struct osst_request * SRpnt = NULL;
3375 struct st_modedef * STm;
3376 struct st_partstat * STps;
3377 struct osst_tape * STp = filp->private_data;
3378 char * name = tape_name(STp);
3381 if (mutex_lock_interruptible(&STp->lock))
3382 return (-ERESTARTSYS);
3385 * If we are in the middle of error recovery, don't let anyone
3386 * else try and use this device. Also, if error recovery fails, it
3387 * may try and take the device offline, in which case all further
3388 * access to the device is prohibited.
3390 if( !scsi_block_when_processing_errors(STp->device) ) {
3391 retval = (-ENXIO);
3392 goto out;
3395 if (STp->ready != ST_READY) {
3396 if (STp->ready == ST_NO_TAPE)
3397 retval = (-ENOMEDIUM);
3398 else
3399 retval = (-EIO);
3400 goto out;
3402 STm = &(STp->modes[STp->current_mode]);
3403 if (!STm->defined) {
3404 retval = (-ENXIO);
3405 goto out;
3407 if (count == 0)
3408 goto out;
3411 * If there was a bus reset, block further access
3412 * to this device.
3414 if (STp->pos_unknown) {
3415 retval = (-EIO);
3416 goto out;
3419 #if DEBUG
3420 if (!STp->in_use) {
3421 printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
3422 retval = (-EIO);
3423 goto out;
3425 #endif
3427 if (STp->write_prot) {
3428 retval = (-EACCES);
3429 goto out;
3432 /* Write must be integral number of blocks */
3433 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
3434 printk(KERN_ERR "%s:E: Write (%Zd bytes) not multiple of tape block size (%d%c).\n",
3435 name, count, STp->block_size<1024?
3436 STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
3437 retval = (-EINVAL);
3438 goto out;
3441 if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) {
3442 printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n",
3443 name, STp->first_frame_position);
3444 retval = (-ENOSPC);
3445 goto out;
3448 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
3449 STp->door_locked = ST_LOCKED_AUTO;
3451 STps = &(STp->ps[STp->partition]);
3453 if (STps->rw == ST_READING) {
3454 #if DEBUG
3455 printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name,
3456 STps->drv_file, STps->drv_block);
3457 #endif
3458 retval = osst_flush_buffer(STp, &SRpnt, 0);
3459 if (retval)
3460 goto out;
3461 STps->rw = ST_IDLE;
3463 if (STps->rw != ST_WRITING) {
3464 /* Are we totally rewriting this tape? */
3465 if (!STp->header_ok ||
3466 (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) ||
3467 (STps->drv_file == 0 && STps->drv_block == 0)) {
3468 STp->wrt_pass_cntr++;
3469 #if DEBUG
3470 printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n",
3471 name, STp->wrt_pass_cntr);
3472 #endif
3473 osst_reset_header(STp, &SRpnt);
3474 STps->drv_file = STps->drv_block = 0;
3476 /* Do we know where we'll be writing on the tape? */
3477 else {
3478 if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) ||
3479 STps->drv_file < 0 || STps->drv_block < 0) {
3480 if (STp->first_frame_position == STp->eod_frame_ppos) { /* at EOD */
3481 STps->drv_file = STp->filemark_cnt;
3482 STps->drv_block = 0;
3484 else {
3485 /* We have no idea where the tape is positioned - give up */
3486 #if DEBUG
3487 printk(OSST_DEB_MSG
3488 "%s:D: Cannot write at indeterminate position.\n", name);
3489 #endif
3490 retval = (-EIO);
3491 goto out;
3494 if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) {
3495 STp->filemark_cnt = STps->drv_file;
3496 STp->last_mark_ppos =
3497 ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]);
3498 printk(KERN_WARNING
3499 "%s:W: Overwriting file %d with old write pass counter %d\n",
3500 name, STps->drv_file, STp->wrt_pass_cntr);
3501 printk(KERN_WARNING
3502 "%s:W: may lead to stale data being accepted on reading back!\n",
3503 name);
3504 #if DEBUG
3505 printk(OSST_DEB_MSG
3506 "%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n",
3507 name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn);
3508 #endif
3511 STp->fast_open = 0;
3513 if (!STp->header_ok) {
3514 #if DEBUG
3515 printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name);
3516 #endif
3517 retval = (-EIO);
3518 goto out;
3521 if ((STp->buffer)->writing) {
3522 if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__);
3523 osst_write_behind_check(STp);
3524 if ((STp->buffer)->syscall_result) {
3525 #if DEBUG
3526 if (debugging)
3527 printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name,
3528 (STp->buffer)->midlevel_result);
3529 #endif
3530 if ((STp->buffer)->midlevel_result == INT_MAX)
3531 STps->eof = ST_EOM_OK;
3532 else
3533 STps->eof = ST_EOM_ERROR;
3536 if (STps->eof == ST_EOM_OK) {
3537 retval = (-ENOSPC);
3538 goto out;
3540 else if (STps->eof == ST_EOM_ERROR) {
3541 retval = (-EIO);
3542 goto out;
3545 /* Check the buffer readability in cases where copy_user might catch
3546 the problems after some tape movement. */
3547 if ((copy_from_user(&i, buf, 1) != 0 ||
3548 copy_from_user(&i, buf + count - 1, 1) != 0)) {
3549 retval = (-EFAULT);
3550 goto out;
3553 if (!STm->do_buffer_writes) {
3554 write_threshold = 1;
3556 else
3557 write_threshold = (STp->buffer)->buffer_blocks * STp->block_size;
3558 if (!STm->do_async_writes)
3559 write_threshold--;
3561 total = count;
3562 #if DEBUG
3563 if (debugging)
3564 printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n",
3565 name, (int) count, STps->drv_file, STps->drv_block,
3566 STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position);
3567 #endif
3568 b_point = buf;
3569 while ((STp->buffer)->buffer_bytes + count > write_threshold)
3571 doing_write = 1;
3572 do_count = (STp->buffer)->buffer_blocks * STp->block_size -
3573 (STp->buffer)->buffer_bytes;
3574 if (do_count > count)
3575 do_count = count;
3577 i = append_to_buffer(b_point, STp->buffer, do_count);
3578 if (i) {
3579 retval = i;
3580 goto out;
3583 blks = do_count / STp->block_size;
3584 STp->logical_blk_num += blks; /* logical_blk_num is incremented as data is moved from user */
3586 i = osst_write_frame(STp, &SRpnt, 1);
3588 if (i == (-ENOSPC)) {
3589 transfer = STp->buffer->writing; /* FIXME -- check this logic */
3590 if (transfer <= do_count) {
3591 *ppos += do_count - transfer;
3592 count -= do_count - transfer;
3593 if (STps->drv_block >= 0) {
3594 STps->drv_block += (do_count - transfer) / STp->block_size;
3596 STps->eof = ST_EOM_OK;
3597 retval = (-ENOSPC); /* EOM within current request */
3598 #if DEBUG
3599 if (debugging)
3600 printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n",
3601 name, (int) transfer);
3602 #endif
3604 else {
3605 STps->eof = ST_EOM_ERROR;
3606 STps->drv_block = (-1); /* Too cautious? */
3607 retval = (-EIO); /* EOM for old data */
3608 #if DEBUG
3609 if (debugging)
3610 printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name);
3611 #endif
3614 else
3615 retval = i;
3617 if (retval < 0) {
3618 if (SRpnt != NULL) {
3619 osst_release_request(SRpnt);
3620 SRpnt = NULL;
3622 STp->buffer->buffer_bytes = 0;
3623 STp->dirty = 0;
3624 if (count < total)
3625 retval = total - count;
3626 goto out;
3629 *ppos += do_count;
3630 b_point += do_count;
3631 count -= do_count;
3632 if (STps->drv_block >= 0) {
3633 STps->drv_block += blks;
3635 STp->buffer->buffer_bytes = 0;
3636 STp->dirty = 0;
3637 } /* end while write threshold exceeded */
3639 if (count != 0) {
3640 STp->dirty = 1;
3641 i = append_to_buffer(b_point, STp->buffer, count);
3642 if (i) {
3643 retval = i;
3644 goto out;
3646 blks = count / STp->block_size;
3647 STp->logical_blk_num += blks;
3648 if (STps->drv_block >= 0) {
3649 STps->drv_block += blks;
3651 *ppos += count;
3652 count = 0;
3655 if (doing_write && (STp->buffer)->syscall_result != 0) {
3656 retval = (STp->buffer)->syscall_result;
3657 goto out;
3660 if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) {
3661 /* Schedule an asynchronous write */
3662 (STp->buffer)->writing = ((STp->buffer)->buffer_bytes /
3663 STp->block_size) * STp->block_size;
3664 STp->dirty = !((STp->buffer)->writing ==
3665 (STp->buffer)->buffer_bytes);
3667 i = osst_write_frame(STp, &SRpnt, 0);
3668 if (i < 0) {
3669 retval = (-EIO);
3670 goto out;
3672 SRpnt = NULL; /* Prevent releasing this request! */
3674 STps->at_sm &= (total == 0);
3675 if (total > 0)
3676 STps->eof = ST_NOEOF;
3678 retval = total;
3680 out:
3681 if (SRpnt != NULL) osst_release_request(SRpnt);
3683 mutex_unlock(&STp->lock);
3685 return retval;
3689 /* Read command */
3690 static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos)
3692 ssize_t total, retval = 0;
3693 ssize_t i, transfer;
3694 int special;
3695 struct st_modedef * STm;
3696 struct st_partstat * STps;
3697 struct osst_request * SRpnt = NULL;
3698 struct osst_tape * STp = filp->private_data;
3699 char * name = tape_name(STp);
3702 if (mutex_lock_interruptible(&STp->lock))
3703 return (-ERESTARTSYS);
3706 * If we are in the middle of error recovery, don't let anyone
3707 * else try and use this device. Also, if error recovery fails, it
3708 * may try and take the device offline, in which case all further
3709 * access to the device is prohibited.
3711 if( !scsi_block_when_processing_errors(STp->device) ) {
3712 retval = (-ENXIO);
3713 goto out;
3716 if (STp->ready != ST_READY) {
3717 if (STp->ready == ST_NO_TAPE)
3718 retval = (-ENOMEDIUM);
3719 else
3720 retval = (-EIO);
3721 goto out;
3723 STm = &(STp->modes[STp->current_mode]);
3724 if (!STm->defined) {
3725 retval = (-ENXIO);
3726 goto out;
3728 #if DEBUG
3729 if (!STp->in_use) {
3730 printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
3731 retval = (-EIO);
3732 goto out;
3734 #endif
3735 /* Must have initialized medium */
3736 if (!STp->header_ok) {
3737 retval = (-EIO);
3738 goto out;
3741 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
3742 STp->door_locked = ST_LOCKED_AUTO;
3744 STps = &(STp->ps[STp->partition]);
3745 if (STps->rw == ST_WRITING) {
3746 retval = osst_flush_buffer(STp, &SRpnt, 0);
3747 if (retval)
3748 goto out;
3749 STps->rw = ST_IDLE;
3750 /* FIXME -- this may leave the tape without EOD and up2date headers */
3753 if ((count % STp->block_size) != 0) {
3754 printk(KERN_WARNING
3755 "%s:W: Read (%Zd bytes) not multiple of tape block size (%d%c).\n", name, count,
3756 STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
3759 #if DEBUG
3760 if (debugging && STps->eof != ST_NOEOF)
3761 printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name,
3762 STps->eof, (STp->buffer)->buffer_bytes);
3763 #endif
3764 if ((STp->buffer)->buffer_bytes == 0 &&
3765 STps->eof >= ST_EOD_1) {
3766 if (STps->eof < ST_EOD) {
3767 STps->eof += 1;
3768 retval = 0;
3769 goto out;
3771 retval = (-EIO); /* EOM or Blank Check */
3772 goto out;
3775 /* Check the buffer writability before any tape movement. Don't alter
3776 buffer data. */
3777 if (copy_from_user(&i, buf, 1) != 0 ||
3778 copy_to_user (buf, &i, 1) != 0 ||
3779 copy_from_user(&i, buf + count - 1, 1) != 0 ||
3780 copy_to_user (buf + count - 1, &i, 1) != 0) {
3781 retval = (-EFAULT);
3782 goto out;
3785 /* Loop until enough data in buffer or a special condition found */
3786 for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) {
3788 /* Get new data if the buffer is empty */
3789 if ((STp->buffer)->buffer_bytes == 0) {
3790 if (STps->eof == ST_FM_HIT)
3791 break;
3792 special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0);
3793 if (special < 0) { /* No need to continue read */
3794 STp->frame_in_buffer = 0;
3795 retval = special;
3796 goto out;
3800 /* Move the data from driver buffer to user buffer */
3801 if ((STp->buffer)->buffer_bytes > 0) {
3802 #if DEBUG
3803 if (debugging && STps->eof != ST_NOEOF)
3804 printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name,
3805 STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total));
3806 #endif
3807 /* force multiple of block size, note block_size may have been adjusted */
3808 transfer = (((STp->buffer)->buffer_bytes < count - total ?
3809 (STp->buffer)->buffer_bytes : count - total)/
3810 STp->block_size) * STp->block_size;
3812 if (transfer == 0) {
3813 printk(KERN_WARNING
3814 "%s:W: Nothing can be transferred, requested %Zd, tape block size (%d%c).\n",
3815 name, count, STp->block_size < 1024?
3816 STp->block_size:STp->block_size/1024,
3817 STp->block_size<1024?'b':'k');
3818 break;
3820 i = from_buffer(STp->buffer, buf, transfer);
3821 if (i) {
3822 retval = i;
3823 goto out;
3825 STp->logical_blk_num += transfer / STp->block_size;
3826 STps->drv_block += transfer / STp->block_size;
3827 *ppos += transfer;
3828 buf += transfer;
3829 total += transfer;
3832 if ((STp->buffer)->buffer_bytes == 0) {
3833 #if DEBUG
3834 if (debugging)
3835 printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n",
3836 name, STp->frame_seq_number);
3837 #endif
3838 STp->frame_in_buffer = 0;
3839 STp->frame_seq_number++; /* frame to look for next time */
3841 } /* for (total = 0, special = 0; total < count && !special; ) */
3843 /* Change the eof state if no data from tape or buffer */
3844 if (total == 0) {
3845 if (STps->eof == ST_FM_HIT) {
3846 STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM;
3847 STps->drv_block = 0;
3848 if (STps->drv_file >= 0)
3849 STps->drv_file++;
3851 else if (STps->eof == ST_EOD_1) {
3852 STps->eof = ST_EOD_2;
3853 if (STps->drv_block > 0 && STps->drv_file >= 0)
3854 STps->drv_file++;
3855 STps->drv_block = 0;
3857 else if (STps->eof == ST_EOD_2)
3858 STps->eof = ST_EOD;
3860 else if (STps->eof == ST_FM)
3861 STps->eof = ST_NOEOF;
3863 retval = total;
3865 out:
3866 if (SRpnt != NULL) osst_release_request(SRpnt);
3868 mutex_unlock(&STp->lock);
3870 return retval;
3874 /* Set the driver options */
3875 static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name)
3877 printk(KERN_INFO
3878 "%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
3879 name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
3880 STm->do_read_ahead);
3881 printk(KERN_INFO
3882 "%s:I: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
3883 name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
3884 printk(KERN_INFO
3885 "%s:I: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
3886 name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
3887 STp->scsi2_logical);
3888 printk(KERN_INFO
3889 "%s:I: sysv: %d\n", name, STm->sysv);
3890 #if DEBUG
3891 printk(KERN_INFO
3892 "%s:D: debugging: %d\n",
3893 name, debugging);
3894 #endif
3898 static int osst_set_options(struct osst_tape *STp, long options)
3900 int value;
3901 long code;
3902 struct st_modedef * STm;
3903 char * name = tape_name(STp);
3905 STm = &(STp->modes[STp->current_mode]);
3906 if (!STm->defined) {
3907 memcpy(STm, &(STp->modes[0]), sizeof(*STm));
3908 modes_defined = 1;
3909 #if DEBUG
3910 if (debugging)
3911 printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n",
3912 name, STp->current_mode);
3913 #endif
3916 code = options & MT_ST_OPTIONS;
3917 if (code == MT_ST_BOOLEANS) {
3918 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
3919 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
3920 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
3921 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
3922 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
3923 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
3924 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
3925 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
3926 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
3927 if ((STp->device)->scsi_level >= SCSI_2)
3928 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
3929 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
3930 STm->sysv = (options & MT_ST_SYSV) != 0;
3931 #if DEBUG
3932 debugging = (options & MT_ST_DEBUGGING) != 0;
3933 #endif
3934 osst_log_options(STp, STm, name);
3936 else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
3937 value = (code == MT_ST_SETBOOLEANS);
3938 if ((options & MT_ST_BUFFER_WRITES) != 0)
3939 STm->do_buffer_writes = value;
3940 if ((options & MT_ST_ASYNC_WRITES) != 0)
3941 STm->do_async_writes = value;
3942 if ((options & MT_ST_DEF_WRITES) != 0)
3943 STm->defaults_for_writes = value;
3944 if ((options & MT_ST_READ_AHEAD) != 0)
3945 STm->do_read_ahead = value;
3946 if ((options & MT_ST_TWO_FM) != 0)
3947 STp->two_fm = value;
3948 if ((options & MT_ST_FAST_MTEOM) != 0)
3949 STp->fast_mteom = value;
3950 if ((options & MT_ST_AUTO_LOCK) != 0)
3951 STp->do_auto_lock = value;
3952 if ((options & MT_ST_CAN_BSR) != 0)
3953 STp->can_bsr = value;
3954 if ((options & MT_ST_NO_BLKLIMS) != 0)
3955 STp->omit_blklims = value;
3956 if ((STp->device)->scsi_level >= SCSI_2 &&
3957 (options & MT_ST_CAN_PARTITIONS) != 0)
3958 STp->can_partitions = value;
3959 if ((options & MT_ST_SCSI2LOGICAL) != 0)
3960 STp->scsi2_logical = value;
3961 if ((options & MT_ST_SYSV) != 0)
3962 STm->sysv = value;
3963 #if DEBUG
3964 if ((options & MT_ST_DEBUGGING) != 0)
3965 debugging = value;
3966 #endif
3967 osst_log_options(STp, STm, name);
3969 else if (code == MT_ST_WRITE_THRESHOLD) {
3970 value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE;
3971 if (value < 1 || value > osst_buffer_size) {
3972 printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n",
3973 name, value);
3974 return (-EIO);
3976 STp->write_threshold = value;
3977 printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n",
3978 name, value);
3980 else if (code == MT_ST_DEF_BLKSIZE) {
3981 value = (options & ~MT_ST_OPTIONS);
3982 if (value == ~MT_ST_OPTIONS) {
3983 STm->default_blksize = (-1);
3984 printk(KERN_INFO "%s:I: Default block size disabled.\n", name);
3986 else {
3987 if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) {
3988 printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n",
3989 name, value);
3990 return (-EINVAL);
3992 STm->default_blksize = value;
3993 printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n",
3994 name, STm->default_blksize);
3997 else if (code == MT_ST_TIMEOUTS) {
3998 value = (options & ~MT_ST_OPTIONS);
3999 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
4000 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
4001 printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name,
4002 (value & ~MT_ST_SET_LONG_TIMEOUT));
4004 else {
4005 STp->timeout = value * HZ;
4006 printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value);
4009 else if (code == MT_ST_DEF_OPTIONS) {
4010 code = (options & ~MT_ST_CLEAR_DEFAULT);
4011 value = (options & MT_ST_CLEAR_DEFAULT);
4012 if (code == MT_ST_DEF_DENSITY) {
4013 if (value == MT_ST_CLEAR_DEFAULT) {
4014 STm->default_density = (-1);
4015 printk(KERN_INFO "%s:I: Density default disabled.\n", name);
4017 else {
4018 STm->default_density = value & 0xff;
4019 printk(KERN_INFO "%s:I: Density default set to %x\n",
4020 name, STm->default_density);
4023 else if (code == MT_ST_DEF_DRVBUFFER) {
4024 if (value == MT_ST_CLEAR_DEFAULT) {
4025 STp->default_drvbuffer = 0xff;
4026 printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name);
4028 else {
4029 STp->default_drvbuffer = value & 7;
4030 printk(KERN_INFO "%s:I: Drive buffer default set to %x\n",
4031 name, STp->default_drvbuffer);
4034 else if (code == MT_ST_DEF_COMPRESSION) {
4035 if (value == MT_ST_CLEAR_DEFAULT) {
4036 STm->default_compression = ST_DONT_TOUCH;
4037 printk(KERN_INFO "%s:I: Compression default disabled.\n", name);
4039 else {
4040 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
4041 printk(KERN_INFO "%s:I: Compression default set to %x\n",
4042 name, (value & 1));
4046 else
4047 return (-EIO);
4049 return 0;
4053 /* Internal ioctl function */
4054 static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt,
4055 unsigned int cmd_in, unsigned long arg)
4057 int timeout;
4058 long ltmp;
4059 int i, ioctl_result;
4060 int chg_eof = 1;
4061 unsigned char cmd[MAX_COMMAND_SIZE];
4062 struct osst_request * SRpnt = * aSRpnt;
4063 struct st_partstat * STps;
4064 int fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num;
4065 int datalen = 0, direction = DMA_NONE;
4066 char * name = tape_name(STp);
4068 if (STp->ready != ST_READY && cmd_in != MTLOAD) {
4069 if (STp->ready == ST_NO_TAPE)
4070 return (-ENOMEDIUM);
4071 else
4072 return (-EIO);
4074 timeout = STp->long_timeout;
4075 STps = &(STp->ps[STp->partition]);
4076 fileno = STps->drv_file;
4077 blkno = STps->drv_block;
4078 at_sm = STps->at_sm;
4079 frame_seq_numbr = STp->frame_seq_number;
4080 logical_blk_num = STp->logical_blk_num;
4082 memset(cmd, 0, MAX_COMMAND_SIZE);
4083 switch (cmd_in) {
4084 case MTFSFM:
4085 chg_eof = 0; /* Changed from the FSF after this */
4086 case MTFSF:
4087 if (STp->raw)
4088 return (-EIO);
4089 if (STp->linux_media)
4090 ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg);
4091 else
4092 ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg);
4093 if (fileno >= 0)
4094 fileno += arg;
4095 blkno = 0;
4096 at_sm &= (arg == 0);
4097 goto os_bypass;
4099 case MTBSF:
4100 chg_eof = 0; /* Changed from the FSF after this */
4101 case MTBSFM:
4102 if (STp->raw)
4103 return (-EIO);
4104 ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg);
4105 if (fileno >= 0)
4106 fileno -= arg;
4107 blkno = (-1); /* We can't know the block number */
4108 at_sm &= (arg == 0);
4109 goto os_bypass;
4111 case MTFSR:
4112 case MTBSR:
4113 #if DEBUG
4114 if (debugging)
4115 printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n",
4116 name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num);
4117 #endif
4118 if (cmd_in == MTFSR) {
4119 logical_blk_num += arg;
4120 if (blkno >= 0) blkno += arg;
4122 else {
4123 logical_blk_num -= arg;
4124 if (blkno >= 0) blkno -= arg;
4126 ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num);
4127 fileno = STps->drv_file;
4128 blkno = STps->drv_block;
4129 at_sm &= (arg == 0);
4130 goto os_bypass;
4132 case MTFSS:
4133 cmd[0] = SPACE;
4134 cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */
4135 cmd[2] = (arg >> 16);
4136 cmd[3] = (arg >> 8);
4137 cmd[4] = arg;
4138 #if DEBUG
4139 if (debugging)
4140 printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name,
4141 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
4142 #endif
4143 if (arg != 0) {
4144 blkno = fileno = (-1);
4145 at_sm = 1;
4147 break;
4148 case MTBSS:
4149 cmd[0] = SPACE;
4150 cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */
4151 ltmp = (-arg);
4152 cmd[2] = (ltmp >> 16);
4153 cmd[3] = (ltmp >> 8);
4154 cmd[4] = ltmp;
4155 #if DEBUG
4156 if (debugging) {
4157 if (cmd[2] & 0x80)
4158 ltmp = 0xff000000;
4159 ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
4160 printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n",
4161 name, (-ltmp));
4163 #endif
4164 if (arg != 0) {
4165 blkno = fileno = (-1);
4166 at_sm = 1;
4168 break;
4169 case MTWEOF:
4170 if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
4171 STp->write_type = OS_WRITE_DATA;
4172 ioctl_result = osst_flush_write_buffer(STp, &SRpnt);
4173 } else
4174 ioctl_result = 0;
4175 #if DEBUG
4176 if (debugging)
4177 printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg);
4178 #endif
4179 for (i=0; i<arg; i++)
4180 ioctl_result |= osst_write_filemark(STp, &SRpnt);
4181 if (fileno >= 0) fileno += arg;
4182 if (blkno >= 0) blkno = 0;
4183 goto os_bypass;
4185 case MTWSM:
4186 if (STp->write_prot)
4187 return (-EACCES);
4188 if (!STp->raw)
4189 return 0;
4190 cmd[0] = WRITE_FILEMARKS; /* FIXME -- need OS version */
4191 if (cmd_in == MTWSM)
4192 cmd[1] = 2;
4193 cmd[2] = (arg >> 16);
4194 cmd[3] = (arg >> 8);
4195 cmd[4] = arg;
4196 timeout = STp->timeout;
4197 #if DEBUG
4198 if (debugging)
4199 printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name,
4200 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
4201 #endif
4202 if (fileno >= 0)
4203 fileno += arg;
4204 blkno = 0;
4205 at_sm = (cmd_in == MTWSM);
4206 break;
4207 case MTOFFL:
4208 case MTLOAD:
4209 case MTUNLOAD:
4210 case MTRETEN:
4211 cmd[0] = START_STOP;
4212 cmd[1] = 1; /* Don't wait for completion */
4213 if (cmd_in == MTLOAD) {
4214 if (STp->ready == ST_NO_TAPE)
4215 cmd[4] = 4; /* open tray */
4216 else
4217 cmd[4] = 1; /* load */
4219 if (cmd_in == MTRETEN)
4220 cmd[4] = 3; /* retension then mount */
4221 if (cmd_in == MTOFFL)
4222 cmd[4] = 4; /* rewind then eject */
4223 timeout = STp->timeout;
4224 #if DEBUG
4225 if (debugging) {
4226 switch (cmd_in) {
4227 case MTUNLOAD:
4228 printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name);
4229 break;
4230 case MTLOAD:
4231 printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name);
4232 break;
4233 case MTRETEN:
4234 printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name);
4235 break;
4236 case MTOFFL:
4237 printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name);
4238 break;
4241 #endif
4242 fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
4243 break;
4244 case MTNOP:
4245 #if DEBUG
4246 if (debugging)
4247 printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name);
4248 #endif
4249 return 0; /* Should do something ? */
4250 break;
4251 case MTEOM:
4252 #if DEBUG
4253 if (debugging)
4254 printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name);
4255 #endif
4256 if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) ||
4257 (osst_get_logical_frame(STp, &SRpnt, -1, 0) < 0)) {
4258 ioctl_result = -EIO;
4259 goto os_bypass;
4261 if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) {
4262 #if DEBUG
4263 printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name);
4264 #endif
4265 ioctl_result = -EIO;
4266 goto os_bypass;
4268 ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0);
4269 fileno = STp->filemark_cnt;
4270 blkno = at_sm = 0;
4271 goto os_bypass;
4273 case MTERASE:
4274 if (STp->write_prot)
4275 return (-EACCES);
4276 ioctl_result = osst_reset_header(STp, &SRpnt);
4277 i = osst_write_eod(STp, &SRpnt);
4278 if (i < ioctl_result) ioctl_result = i;
4279 i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos);
4280 if (i < ioctl_result) ioctl_result = i;
4281 fileno = blkno = at_sm = 0 ;
4282 goto os_bypass;
4284 case MTREW:
4285 cmd[0] = REZERO_UNIT; /* rewind */
4286 cmd[1] = 1;
4287 #if DEBUG
4288 if (debugging)
4289 printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]);
4290 #endif
4291 fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
4292 break;
4294 case MTSETBLK: /* Set block length */
4295 if ((STps->drv_block == 0 ) &&
4296 !STp->dirty &&
4297 ((STp->buffer)->buffer_bytes == 0) &&
4298 ((arg & MT_ST_BLKSIZE_MASK) >= 512 ) &&
4299 ((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) &&
4300 !(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK)) ) {
4302 * Only allowed to change the block size if you opened the
4303 * device at the beginning of a file before writing anything.
4304 * Note, that when reading, changing block_size is futile,
4305 * as the size used when writing overrides it.
4307 STp->block_size = (arg & MT_ST_BLKSIZE_MASK);
4308 printk(KERN_INFO "%s:I: Block size set to %d bytes.\n",
4309 name, STp->block_size);
4310 return 0;
4312 case MTSETDENSITY: /* Set tape density */
4313 case MTSETDRVBUFFER: /* Set drive buffering */
4314 case SET_DENS_AND_BLK: /* Set density and block size */
4315 chg_eof = 0;
4316 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
4317 return (-EIO); /* Not allowed if data in buffer */
4318 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
4319 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
4320 (arg & MT_ST_BLKSIZE_MASK) != STp->block_size ) {
4321 printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n",
4322 name, (int)(arg & MT_ST_BLKSIZE_MASK),
4323 (OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now");
4324 return (-EINVAL);
4326 return 0; /* FIXME silently ignore if block size didn't change */
4328 default:
4329 return (-ENOSYS);
4332 SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1);
4334 ioctl_result = (STp->buffer)->syscall_result;
4336 if (!SRpnt) {
4337 #if DEBUG
4338 printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name);
4339 #endif
4340 return ioctl_result;
4343 if (!ioctl_result) { /* SCSI command successful */
4344 STp->frame_seq_number = frame_seq_numbr;
4345 STp->logical_blk_num = logical_blk_num;
4348 os_bypass:
4349 #if DEBUG
4350 if (debugging)
4351 printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result);
4352 #endif
4354 if (!ioctl_result) { /* success */
4356 if (cmd_in == MTFSFM) {
4357 fileno--;
4358 blkno--;
4360 if (cmd_in == MTBSFM) {
4361 fileno++;
4362 blkno++;
4364 STps->drv_block = blkno;
4365 STps->drv_file = fileno;
4366 STps->at_sm = at_sm;
4368 if (cmd_in == MTEOM)
4369 STps->eof = ST_EOD;
4370 else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) {
4371 ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1);
4372 STps->drv_block++;
4373 STp->logical_blk_num++;
4374 STp->frame_seq_number++;
4375 STp->frame_in_buffer = 0;
4376 STp->buffer->read_pointer = 0;
4378 else if (cmd_in == MTFSF)
4379 STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM;
4380 else if (chg_eof)
4381 STps->eof = ST_NOEOF;
4383 if (cmd_in == MTOFFL || cmd_in == MTUNLOAD)
4384 STp->rew_at_close = 0;
4385 else if (cmd_in == MTLOAD) {
4386 for (i=0; i < ST_NBR_PARTITIONS; i++) {
4387 STp->ps[i].rw = ST_IDLE;
4388 STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */
4390 STp->partition = 0;
4393 if (cmd_in == MTREW) {
4394 ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
4395 if (ioctl_result > 0)
4396 ioctl_result = 0;
4399 } else if (cmd_in == MTBSF || cmd_in == MTBSFM ) {
4400 if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0)
4401 STps->drv_file = STps->drv_block = -1;
4402 else
4403 STps->drv_file = STps->drv_block = 0;
4404 STps->eof = ST_NOEOF;
4405 } else if (cmd_in == MTFSF || cmd_in == MTFSFM) {
4406 if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0)
4407 STps->drv_file = STps->drv_block = -1;
4408 else {
4409 STps->drv_file = STp->filemark_cnt;
4410 STps->drv_block = 0;
4412 STps->eof = ST_EOD;
4413 } else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) {
4414 STps->drv_file = STps->drv_block = (-1);
4415 STps->eof = ST_NOEOF;
4416 STp->header_ok = 0;
4417 } else if (cmd_in == MTERASE) {
4418 STp->header_ok = 0;
4419 } else if (SRpnt) { /* SCSI command was not completely successful. */
4420 if (SRpnt->sense[2] & 0x40) {
4421 STps->eof = ST_EOM_OK;
4422 STps->drv_block = 0;
4424 if (chg_eof)
4425 STps->eof = ST_NOEOF;
4427 if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK)
4428 STps->eof = ST_EOD;
4430 if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60))
4431 ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
4433 *aSRpnt = SRpnt;
4435 return ioctl_result;
4439 /* Open the device */
4440 static int __os_scsi_tape_open(struct inode * inode, struct file * filp)
4442 unsigned short flags;
4443 int i, b_size, new_session = 0, retval = 0;
4444 unsigned char cmd[MAX_COMMAND_SIZE];
4445 struct osst_request * SRpnt = NULL;
4446 struct osst_tape * STp;
4447 struct st_modedef * STm;
4448 struct st_partstat * STps;
4449 char * name;
4450 int dev = TAPE_NR(inode);
4451 int mode = TAPE_MODE(inode);
4454 * We really want to do nonseekable_open(inode, filp); here, but some
4455 * versions of tar incorrectly call lseek on tapes and bail out if that
4456 * fails. So we disallow pread() and pwrite(), but permit lseeks.
4458 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
4460 write_lock(&os_scsi_tapes_lock);
4461 if (dev >= osst_max_dev || os_scsi_tapes == NULL ||
4462 (STp = os_scsi_tapes[dev]) == NULL || !STp->device) {
4463 write_unlock(&os_scsi_tapes_lock);
4464 return (-ENXIO);
4467 name = tape_name(STp);
4469 if (STp->in_use) {
4470 write_unlock(&os_scsi_tapes_lock);
4471 #if DEBUG
4472 printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name);
4473 #endif
4474 return (-EBUSY);
4476 if (scsi_device_get(STp->device)) {
4477 write_unlock(&os_scsi_tapes_lock);
4478 #if DEBUG
4479 printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name);
4480 #endif
4481 return (-ENXIO);
4483 filp->private_data = STp;
4484 STp->in_use = 1;
4485 write_unlock(&os_scsi_tapes_lock);
4486 STp->rew_at_close = TAPE_REWIND(inode);
4488 if( !scsi_block_when_processing_errors(STp->device) ) {
4489 return -ENXIO;
4492 if (mode != STp->current_mode) {
4493 #if DEBUG
4494 if (debugging)
4495 printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n",
4496 name, STp->current_mode, mode);
4497 #endif
4498 new_session = 1;
4499 STp->current_mode = mode;
4501 STm = &(STp->modes[STp->current_mode]);
4503 flags = filp->f_flags;
4504 STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY);
4506 STp->raw = TAPE_IS_RAW(inode);
4507 if (STp->raw)
4508 STp->header_ok = 0;
4510 /* Allocate data segments for this device's tape buffer */
4511 if (!enlarge_buffer(STp->buffer, STp->restr_dma)) {
4512 printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name);
4513 retval = (-EOVERFLOW);
4514 goto err_out;
4516 if (STp->buffer->buffer_size >= OS_FRAME_SIZE) {
4517 for (i = 0, b_size = 0;
4518 (i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE);
4519 b_size += STp->buffer->sg[i++].length);
4520 STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size);
4521 #if DEBUG
4522 printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name,
4523 STp->buffer->b_data, page_address(STp->buffer->sg[0].page));
4524 printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name,
4525 STp->buffer->aux, i, page_address(STp->buffer->sg[i].page));
4526 #endif
4527 } else {
4528 STp->buffer->aux = NULL; /* this had better never happen! */
4529 printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE);
4530 retval = (-EIO);
4531 goto err_out;
4533 STp->buffer->writing = 0;
4534 STp->buffer->syscall_result = 0;
4535 STp->dirty = 0;
4536 for (i=0; i < ST_NBR_PARTITIONS; i++) {
4537 STps = &(STp->ps[i]);
4538 STps->rw = ST_IDLE;
4540 STp->ready = ST_READY;
4541 #if DEBUG
4542 STp->nbr_waits = STp->nbr_finished = 0;
4543 #endif
4545 memset (cmd, 0, MAX_COMMAND_SIZE);
4546 cmd[0] = TEST_UNIT_READY;
4548 SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
4549 if (!SRpnt) {
4550 retval = (STp->buffer)->syscall_result; /* FIXME - valid? */
4551 goto err_out;
4553 if ((SRpnt->sense[0] & 0x70) == 0x70 &&
4554 (SRpnt->sense[2] & 0x0f) == NOT_READY &&
4555 SRpnt->sense[12] == 4 ) {
4556 #if DEBUG
4557 printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]);
4558 #endif
4559 if (filp->f_flags & O_NONBLOCK) {
4560 retval = -EAGAIN;
4561 goto err_out;
4563 if (SRpnt->sense[13] == 2) { /* initialize command required (LOAD) */
4564 memset (cmd, 0, MAX_COMMAND_SIZE);
4565 cmd[0] = START_STOP;
4566 cmd[1] = 1;
4567 cmd[4] = 1;
4568 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
4569 STp->timeout, MAX_RETRIES, 1);
4571 osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0);
4573 if ((SRpnt->sense[0] & 0x70) == 0x70 &&
4574 (SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */
4575 #if DEBUG
4576 printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name);
4577 #endif
4578 STp->header_ok = 0;
4580 for (i=0; i < 10; i++) {
4582 memset (cmd, 0, MAX_COMMAND_SIZE);
4583 cmd[0] = TEST_UNIT_READY;
4585 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
4586 STp->timeout, MAX_RETRIES, 1);
4587 if ((SRpnt->sense[0] & 0x70) != 0x70 ||
4588 (SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION)
4589 break;
4592 STp->pos_unknown = 0;
4593 STp->partition = STp->new_partition = 0;
4594 if (STp->can_partitions)
4595 STp->nbr_partitions = 1; /* This guess will be updated later if necessary */
4596 for (i=0; i < ST_NBR_PARTITIONS; i++) {
4597 STps = &(STp->ps[i]);
4598 STps->rw = ST_IDLE; /* FIXME - seems to be redundant... */
4599 STps->eof = ST_NOEOF;
4600 STps->at_sm = 0;
4601 STps->last_block_valid = 0;
4602 STps->drv_block = 0;
4603 STps->drv_file = 0 ;
4605 new_session = 1;
4606 STp->recover_count = 0;
4607 STp->abort_count = 0;
4610 * if we have valid headers from before, and the drive/tape seem untouched,
4611 * open without reconfiguring and re-reading the headers
4613 if (!STp->buffer->syscall_result && STp->header_ok &&
4614 !SRpnt->result && SRpnt->sense[0] == 0) {
4616 memset(cmd, 0, MAX_COMMAND_SIZE);
4617 cmd[0] = MODE_SENSE;
4618 cmd[1] = 8;
4619 cmd[2] = VENDOR_IDENT_PAGE;
4620 cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
4622 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
4624 if (STp->buffer->syscall_result ||
4625 STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' ||
4626 STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' ||
4627 STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' ||
4628 STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4' ) {
4629 #if DEBUG
4630 printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name,
4631 STp->buffer->b_data[MODE_HEADER_LENGTH + 2],
4632 STp->buffer->b_data[MODE_HEADER_LENGTH + 3],
4633 STp->buffer->b_data[MODE_HEADER_LENGTH + 4],
4634 STp->buffer->b_data[MODE_HEADER_LENGTH + 5]);
4635 #endif
4636 STp->header_ok = 0;
4638 i = STp->first_frame_position;
4639 if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) {
4640 if (STp->door_locked == ST_UNLOCKED) {
4641 if (do_door_lock(STp, 1))
4642 printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
4643 else
4644 STp->door_locked = ST_LOCKED_AUTO;
4646 if (!STp->frame_in_buffer) {
4647 STp->block_size = (STm->default_blksize > 0) ?
4648 STm->default_blksize : OS_DATA_SIZE;
4649 STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
4651 STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size;
4652 STp->fast_open = 1;
4653 osst_release_request(SRpnt);
4654 return 0;
4656 #if DEBUG
4657 if (i != STp->first_frame_position)
4658 printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n",
4659 name, i, STp->first_frame_position);
4660 #endif
4661 STp->header_ok = 0;
4663 STp->fast_open = 0;
4665 if ((STp->buffer)->syscall_result != 0 && /* in all error conditions except no medium */
4666 (SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) {
4668 memset(cmd, 0, MAX_COMMAND_SIZE);
4669 cmd[0] = MODE_SELECT;
4670 cmd[1] = 0x10;
4671 cmd[4] = 4 + MODE_HEADER_LENGTH;
4673 (STp->buffer)->b_data[0] = cmd[4] - 1;
4674 (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */
4675 (STp->buffer)->b_data[2] = 0; /* Reserved */
4676 (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */
4677 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f;
4678 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1;
4679 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2;
4680 (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3;
4682 #if DEBUG
4683 printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name);
4684 #endif
4685 SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
4687 STp->header_ok = 0;
4689 for (i=0; i < 10; i++) {
4691 memset (cmd, 0, MAX_COMMAND_SIZE);
4692 cmd[0] = TEST_UNIT_READY;
4694 SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
4695 STp->timeout, MAX_RETRIES, 1);
4696 if ((SRpnt->sense[0] & 0x70) != 0x70 ||
4697 (SRpnt->sense[2] & 0x0f) == NOT_READY)
4698 break;
4700 if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) {
4701 int j;
4703 STp->pos_unknown = 0;
4704 STp->partition = STp->new_partition = 0;
4705 if (STp->can_partitions)
4706 STp->nbr_partitions = 1; /* This guess will be updated later if necessary */
4707 for (j = 0; j < ST_NBR_PARTITIONS; j++) {
4708 STps = &(STp->ps[j]);
4709 STps->rw = ST_IDLE;
4710 STps->eof = ST_NOEOF;
4711 STps->at_sm = 0;
4712 STps->last_block_valid = 0;
4713 STps->drv_block = 0;
4714 STps->drv_file = 0 ;
4716 new_session = 1;
4721 if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0)) /* FIXME - not allowed with NOBLOCK */
4722 printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name);
4724 if ((STp->buffer)->syscall_result != 0) {
4725 if ((STp->device)->scsi_level >= SCSI_2 &&
4726 (SRpnt->sense[0] & 0x70) == 0x70 &&
4727 (SRpnt->sense[2] & 0x0f) == NOT_READY &&
4728 SRpnt->sense[12] == 0x3a) { /* Check ASC */
4729 STp->ready = ST_NO_TAPE;
4730 } else
4731 STp->ready = ST_NOT_READY;
4732 osst_release_request(SRpnt);
4733 SRpnt = NULL;
4734 STp->density = 0; /* Clear the erroneous "residue" */
4735 STp->write_prot = 0;
4736 STp->block_size = 0;
4737 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
4738 STp->partition = STp->new_partition = 0;
4739 STp->door_locked = ST_UNLOCKED;
4740 return 0;
4743 osst_configure_onstream(STp, &SRpnt);
4745 STp->block_size = STp->raw ? OS_FRAME_SIZE : (
4746 (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE);
4747 STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size;
4748 STp->buffer->buffer_bytes =
4749 STp->buffer->read_pointer =
4750 STp->frame_in_buffer = 0;
4752 #if DEBUG
4753 if (debugging)
4754 printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n",
4755 name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size,
4756 (STp->buffer)->buffer_blocks);
4757 #endif
4759 if (STp->drv_write_prot) {
4760 STp->write_prot = 1;
4761 #if DEBUG
4762 if (debugging)
4763 printk(OSST_DEB_MSG "%s:D: Write protected\n", name);
4764 #endif
4765 if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) {
4766 retval = (-EROFS);
4767 goto err_out;
4771 if (new_session) { /* Change the drive parameters for the new mode */
4772 #if DEBUG
4773 if (debugging)
4774 printk(OSST_DEB_MSG "%s:D: New Session\n", name);
4775 #endif
4776 STp->density_changed = STp->blksize_changed = 0;
4777 STp->compression_changed = 0;
4781 * properly position the tape and check the ADR headers
4783 if (STp->door_locked == ST_UNLOCKED) {
4784 if (do_door_lock(STp, 1))
4785 printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
4786 else
4787 STp->door_locked = ST_LOCKED_AUTO;
4790 osst_analyze_headers(STp, &SRpnt);
4792 osst_release_request(SRpnt);
4793 SRpnt = NULL;
4795 return 0;
4797 err_out:
4798 if (SRpnt != NULL)
4799 osst_release_request(SRpnt);
4800 normalize_buffer(STp->buffer);
4801 STp->header_ok = 0;
4802 STp->in_use = 0;
4803 scsi_device_put(STp->device);
4805 return retval;
4808 /* BKL pushdown: spaghetti avoidance wrapper */
4809 static int os_scsi_tape_open(struct inode * inode, struct file * filp)
4811 int ret;
4813 mutex_lock(&osst_int_mutex);
4814 ret = __os_scsi_tape_open(inode, filp);
4815 mutex_unlock(&osst_int_mutex);
4816 return ret;
4821 /* Flush the tape buffer before close */
4822 static int os_scsi_tape_flush(struct file * filp, fl_owner_t id)
4824 int result = 0, result2;
4825 struct osst_tape * STp = filp->private_data;
4826 struct st_modedef * STm = &(STp->modes[STp->current_mode]);
4827 struct st_partstat * STps = &(STp->ps[STp->partition]);
4828 struct osst_request * SRpnt = NULL;
4829 char * name = tape_name(STp);
4831 if (file_count(filp) > 1)
4832 return 0;
4834 if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
4835 STp->write_type = OS_WRITE_DATA;
4836 result = osst_flush_write_buffer(STp, &SRpnt);
4837 if (result != 0 && result != (-ENOSPC))
4838 goto out;
4840 if ( STps->rw >= ST_WRITING && !STp->pos_unknown) {
4842 #if DEBUG
4843 if (debugging) {
4844 printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n",
4845 name, (long)(filp->f_pos));
4846 printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n",
4847 name, STp->nbr_waits, STp->nbr_finished);
4849 #endif
4850 result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close));
4851 #if DEBUG
4852 if (debugging)
4853 printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n",
4854 name, 1+STp->two_fm);
4855 #endif
4857 else if (!STp->rew_at_close) {
4858 STps = &(STp->ps[STp->partition]);
4859 if (!STm->sysv || STps->rw != ST_READING) {
4860 if (STp->can_bsr)
4861 result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */
4862 else if (STps->eof == ST_FM_HIT) {
4863 result = cross_eof(STp, &SRpnt, 0);
4864 if (result) {
4865 if (STps->drv_file >= 0)
4866 STps->drv_file++;
4867 STps->drv_block = 0;
4868 STps->eof = ST_FM;
4870 else
4871 STps->eof = ST_NOEOF;
4874 else if ((STps->eof == ST_NOEOF &&
4875 !(result = cross_eof(STp, &SRpnt, 1))) ||
4876 STps->eof == ST_FM_HIT) {
4877 if (STps->drv_file >= 0)
4878 STps->drv_file++;
4879 STps->drv_block = 0;
4880 STps->eof = ST_FM;
4884 out:
4885 if (STp->rew_at_close) {
4886 result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
4887 STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
4888 if (result == 0 && result2 < 0)
4889 result = result2;
4891 if (SRpnt) osst_release_request(SRpnt);
4893 if (STp->abort_count || STp->recover_count) {
4894 printk(KERN_INFO "%s:I:", name);
4895 if (STp->abort_count)
4896 printk(" %d unrecovered errors", STp->abort_count);
4897 if (STp->recover_count)
4898 printk(" %d recovered errors", STp->recover_count);
4899 if (STp->write_count)
4900 printk(" in %d frames written", STp->write_count);
4901 if (STp->read_count)
4902 printk(" in %d frames read", STp->read_count);
4903 printk("\n");
4904 STp->recover_count = 0;
4905 STp->abort_count = 0;
4907 STp->write_count = 0;
4908 STp->read_count = 0;
4910 return result;
4914 /* Close the device and release it */
4915 static int os_scsi_tape_close(struct inode * inode, struct file * filp)
4917 int result = 0;
4918 struct osst_tape * STp = filp->private_data;
4920 if (STp->door_locked == ST_LOCKED_AUTO)
4921 do_door_lock(STp, 0);
4923 if (STp->raw)
4924 STp->header_ok = 0;
4926 normalize_buffer(STp->buffer);
4927 write_lock(&os_scsi_tapes_lock);
4928 STp->in_use = 0;
4929 write_unlock(&os_scsi_tapes_lock);
4931 scsi_device_put(STp->device);
4933 return result;
4937 /* The ioctl command */
4938 static long osst_ioctl(struct file * file,
4939 unsigned int cmd_in, unsigned long arg)
4941 int i, cmd_nr, cmd_type, blk, retval = 0;
4942 struct st_modedef * STm;
4943 struct st_partstat * STps;
4944 struct osst_request * SRpnt = NULL;
4945 struct osst_tape * STp = file->private_data;
4946 char * name = tape_name(STp);
4947 void __user * p = (void __user *)arg;
4949 mutex_lock(&osst_int_mutex);
4950 if (mutex_lock_interruptible(&STp->lock)) {
4951 mutex_unlock(&osst_int_mutex);
4952 return -ERESTARTSYS;
4955 #if DEBUG
4956 if (debugging && !STp->in_use) {
4957 printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
4958 retval = (-EIO);
4959 goto out;
4961 #endif
4962 STm = &(STp->modes[STp->current_mode]);
4963 STps = &(STp->ps[STp->partition]);
4966 * If we are in the middle of error recovery, don't let anyone
4967 * else try and use this device. Also, if error recovery fails, it
4968 * may try and take the device offline, in which case all further
4969 * access to the device is prohibited.
4971 if( !scsi_block_when_processing_errors(STp->device) ) {
4972 retval = (-ENXIO);
4973 goto out;
4976 cmd_type = _IOC_TYPE(cmd_in);
4977 cmd_nr = _IOC_NR(cmd_in);
4978 #if DEBUG
4979 printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name,
4980 cmd_type, cmd_nr, STp->raw?"raw":"normal");
4981 #endif
4982 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
4983 struct mtop mtc;
4984 int auto_weof = 0;
4986 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
4987 retval = (-EINVAL);
4988 goto out;
4991 i = copy_from_user((char *) &mtc, p, sizeof(struct mtop));
4992 if (i) {
4993 retval = (-EFAULT);
4994 goto out;
4997 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
4998 printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name);
4999 retval = (-EPERM);
5000 goto out;
5003 if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
5004 retval = (-ENXIO);
5005 goto out;
5008 if (!STp->pos_unknown) {
5010 if (STps->eof == ST_FM_HIT) {
5011 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) {
5012 mtc.mt_count -= 1;
5013 if (STps->drv_file >= 0)
5014 STps->drv_file += 1;
5016 else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
5017 mtc.mt_count += 1;
5018 if (STps->drv_file >= 0)
5019 STps->drv_file += 1;
5023 if (mtc.mt_op == MTSEEK) {
5024 /* Old position must be restored if partition will be changed */
5025 i = !STp->can_partitions || (STp->new_partition != STp->partition);
5027 else {
5028 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
5029 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
5030 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
5031 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
5032 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
5033 mtc.mt_op == MTCOMPRESSION;
5035 i = osst_flush_buffer(STp, &SRpnt, i);
5036 if (i < 0) {
5037 retval = i;
5038 goto out;
5041 else {
5043 * If there was a bus reset, block further access
5044 * to this device. If the user wants to rewind the tape,
5045 * then reset the flag and allow access again.
5047 if(mtc.mt_op != MTREW &&
5048 mtc.mt_op != MTOFFL &&
5049 mtc.mt_op != MTRETEN &&
5050 mtc.mt_op != MTERASE &&
5051 mtc.mt_op != MTSEEK &&
5052 mtc.mt_op != MTEOM) {
5053 retval = (-EIO);
5054 goto out;
5056 reset_state(STp);
5057 /* remove this when the midlevel properly clears was_reset */
5058 STp->device->was_reset = 0;
5061 if (mtc.mt_op != MTCOMPRESSION && mtc.mt_op != MTLOCK &&
5062 mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
5063 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTSETDRVBUFFER &&
5064 mtc.mt_op != MTMKPART && mtc.mt_op != MTSETPART &&
5065 mtc.mt_op != MTWEOF && mtc.mt_op != MTWSM ) {
5068 * The user tells us to move to another position on the tape.
5069 * If we were appending to the tape content, that would leave
5070 * the tape without proper end, in that case write EOD and
5071 * update the header to reflect its position.
5073 #if DEBUG
5074 printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name,
5075 STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle",
5076 STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number,
5077 STp->logical_blk_num, STps->drv_file, STps->drv_block );
5078 #endif
5079 if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) {
5080 auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) &&
5081 !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
5082 i = osst_write_trailer(STp, &SRpnt,
5083 !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
5084 #if DEBUG
5085 printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n",
5086 name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos,
5087 STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block );
5088 #endif
5089 if (i < 0) {
5090 retval = i;
5091 goto out;
5094 STps->rw = ST_IDLE;
5097 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
5098 do_door_lock(STp, 0); /* Ignore result! */
5100 if (mtc.mt_op == MTSETDRVBUFFER &&
5101 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
5102 retval = osst_set_options(STp, mtc.mt_count);
5103 goto out;
5106 if (mtc.mt_op == MTSETPART) {
5107 if (mtc.mt_count >= STp->nbr_partitions)
5108 retval = -EINVAL;
5109 else {
5110 STp->new_partition = mtc.mt_count;
5111 retval = 0;
5113 goto out;
5116 if (mtc.mt_op == MTMKPART) {
5117 if (!STp->can_partitions) {
5118 retval = (-EINVAL);
5119 goto out;
5121 if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*||
5122 (i = partition_tape(inode, mtc.mt_count)) < 0*/) {
5123 retval = i;
5124 goto out;
5126 for (i=0; i < ST_NBR_PARTITIONS; i++) {
5127 STp->ps[i].rw = ST_IDLE;
5128 STp->ps[i].at_sm = 0;
5129 STp->ps[i].last_block_valid = 0;
5131 STp->partition = STp->new_partition = 0;
5132 STp->nbr_partitions = 1; /* Bad guess ?-) */
5133 STps->drv_block = STps->drv_file = 0;
5134 retval = 0;
5135 goto out;
5138 if (mtc.mt_op == MTSEEK) {
5139 if (STp->raw)
5140 i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0);
5141 else
5142 i = osst_seek_sector(STp, &SRpnt, mtc.mt_count);
5143 if (!STp->can_partitions)
5144 STp->ps[0].rw = ST_IDLE;
5145 retval = i;
5146 goto out;
5149 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
5150 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
5151 goto out;
5154 if (auto_weof)
5155 cross_eof(STp, &SRpnt, 0);
5157 if (mtc.mt_op == MTCOMPRESSION)
5158 retval = -EINVAL; /* OnStream drives don't have compression hardware */
5159 else
5160 /* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS
5161 * MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */
5162 retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count);
5163 goto out;
5166 if (!STm->defined) {
5167 retval = (-ENXIO);
5168 goto out;
5171 if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) {
5172 retval = i;
5173 goto out;
5176 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
5177 struct mtget mt_status;
5179 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
5180 retval = (-EINVAL);
5181 goto out;
5184 mt_status.mt_type = MT_ISONSTREAM_SC;
5185 mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT;
5186 mt_status.mt_dsreg =
5187 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
5188 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
5189 mt_status.mt_blkno = STps->drv_block;
5190 mt_status.mt_fileno = STps->drv_file;
5191 if (STp->block_size != 0) {
5192 if (STps->rw == ST_WRITING)
5193 mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size;
5194 else if (STps->rw == ST_READING)
5195 mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes +
5196 STp->block_size - 1) / STp->block_size;
5199 mt_status.mt_gstat = 0;
5200 if (STp->drv_write_prot)
5201 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
5202 if (mt_status.mt_blkno == 0) {
5203 if (mt_status.mt_fileno == 0)
5204 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
5205 else
5206 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
5208 mt_status.mt_resid = STp->partition;
5209 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
5210 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
5211 else if (STps->eof >= ST_EOM_OK)
5212 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
5213 if (STp->density == 1)
5214 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
5215 else if (STp->density == 2)
5216 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
5217 else if (STp->density == 3)
5218 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
5219 if (STp->ready == ST_READY)
5220 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
5221 if (STp->ready == ST_NO_TAPE)
5222 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
5223 if (STps->at_sm)
5224 mt_status.mt_gstat |= GMT_SM(0xffffffff);
5225 if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) ||
5226 STp->drv_buffer != 0)
5227 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
5229 i = copy_to_user(p, &mt_status, sizeof(struct mtget));
5230 if (i) {
5231 retval = (-EFAULT);
5232 goto out;
5235 STp->recover_erreg = 0; /* Clear after read */
5236 retval = 0;
5237 goto out;
5238 } /* End of MTIOCGET */
5240 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
5241 struct mtpos mt_pos;
5243 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
5244 retval = (-EINVAL);
5245 goto out;
5247 if (STp->raw)
5248 blk = osst_get_frame_position(STp, &SRpnt);
5249 else
5250 blk = osst_get_sector(STp, &SRpnt);
5251 if (blk < 0) {
5252 retval = blk;
5253 goto out;
5255 mt_pos.mt_blkno = blk;
5256 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
5257 if (i)
5258 retval = -EFAULT;
5259 goto out;
5261 if (SRpnt) osst_release_request(SRpnt);
5263 mutex_unlock(&STp->lock);
5265 retval = scsi_ioctl(STp->device, cmd_in, p);
5266 mutex_unlock(&osst_int_mutex);
5267 return retval;
5269 out:
5270 if (SRpnt) osst_release_request(SRpnt);
5272 mutex_unlock(&STp->lock);
5273 mutex_unlock(&osst_int_mutex);
5275 return retval;
5278 #ifdef CONFIG_COMPAT
5279 static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg)
5281 struct osst_tape *STp = file->private_data;
5282 struct scsi_device *sdev = STp->device;
5283 int ret = -ENOIOCTLCMD;
5284 if (sdev->host->hostt->compat_ioctl) {
5286 ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg);
5289 return ret;
5291 #endif
5295 /* Memory handling routines */
5297 /* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */
5298 static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg )
5300 int i;
5301 gfp_t priority;
5302 struct osst_buffer *tb;
5304 if (from_initialization)
5305 priority = GFP_ATOMIC;
5306 else
5307 priority = GFP_KERNEL;
5309 i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist);
5310 tb = kzalloc(i, priority);
5311 if (!tb) {
5312 printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n");
5313 return NULL;
5316 tb->sg_segs = tb->orig_sg_segs = 0;
5317 tb->use_sg = max_sg;
5318 tb->in_use = 1;
5319 tb->dma = need_dma;
5320 tb->buffer_size = 0;
5321 #if DEBUG
5322 if (debugging)
5323 printk(OSST_DEB_MSG
5324 "osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n",
5325 i, max_sg, need_dma);
5326 #endif
5327 return tb;
5330 /* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */
5331 static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma)
5333 int segs, nbr, max_segs, b_size, order, got;
5334 gfp_t priority;
5336 if (STbuffer->buffer_size >= OS_FRAME_SIZE)
5337 return 1;
5339 if (STbuffer->sg_segs) {
5340 printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n");
5341 normalize_buffer(STbuffer);
5343 /* See how many segments we can use -- need at least two */
5344 nbr = max_segs = STbuffer->use_sg;
5345 if (nbr <= 2)
5346 return 0;
5348 priority = GFP_KERNEL /* | __GFP_NOWARN */;
5349 if (need_dma)
5350 priority |= GFP_DMA;
5352 /* Try to allocate the first segment up to OS_DATA_SIZE and the others
5353 big enough to reach the goal (code assumes no segments in place) */
5354 for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) {
5355 struct page *page = alloc_pages(priority, order);
5357 STbuffer->sg[0].offset = 0;
5358 if (page != NULL) {
5359 sg_set_page(&STbuffer->sg[0], page, b_size, 0);
5360 STbuffer->b_data = page_address(page);
5361 break;
5364 if (sg_page(&STbuffer->sg[0]) == NULL) {
5365 printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n");
5366 return 0;
5368 /* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */
5369 for (segs=STbuffer->sg_segs=1, got=b_size;
5370 segs < max_segs && got < OS_FRAME_SIZE; ) {
5371 struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order);
5372 STbuffer->sg[segs].offset = 0;
5373 if (page == NULL) {
5374 printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n",
5375 OS_FRAME_SIZE);
5376 #if DEBUG
5377 STbuffer->buffer_size = got;
5378 #endif
5379 normalize_buffer(STbuffer);
5380 return 0;
5382 sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0);
5383 got += STbuffer->sg[segs].length;
5384 STbuffer->buffer_size = got;
5385 STbuffer->sg_segs = ++segs;
5387 #if DEBUG
5388 if (debugging) {
5389 printk(OSST_DEB_MSG
5390 "osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n",
5391 got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data);
5392 printk(OSST_DEB_MSG
5393 "osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n",
5394 STbuffer->sg[0].length, page_address(STbuffer->sg[0].page),
5395 STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page));
5397 #endif
5399 return 1;
5403 /* Release the segments */
5404 static void normalize_buffer(struct osst_buffer *STbuffer)
5406 int i, order, b_size;
5408 for (i=0; i < STbuffer->sg_segs; i++) {
5410 for (b_size = PAGE_SIZE, order = 0;
5411 b_size < STbuffer->sg[i].length;
5412 b_size *= 2, order++);
5414 __free_pages(sg_page(&STbuffer->sg[i]), order);
5415 STbuffer->buffer_size -= STbuffer->sg[i].length;
5417 #if DEBUG
5418 if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs)
5419 printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n",
5420 STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs);
5421 #endif
5422 STbuffer->sg_segs = STbuffer->orig_sg_segs = 0;
5426 /* Move data from the user buffer to the tape buffer. Returns zero (success) or
5427 negative error code. */
5428 static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count)
5430 int i, cnt, res, offset;
5432 for (i=0, offset=st_bp->buffer_bytes;
5433 i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
5434 offset -= st_bp->sg[i].length;
5435 if (i == st_bp->sg_segs) { /* Should never happen */
5436 printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n");
5437 return (-EIO);
5439 for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
5440 cnt = st_bp->sg[i].length - offset < do_count ?
5441 st_bp->sg[i].length - offset : do_count;
5442 res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt);
5443 if (res)
5444 return (-EFAULT);
5445 do_count -= cnt;
5446 st_bp->buffer_bytes += cnt;
5447 ubp += cnt;
5448 offset = 0;
5450 if (do_count) { /* Should never happen */
5451 printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n",
5452 do_count);
5453 return (-EIO);
5455 return 0;
5459 /* Move data from the tape buffer to the user buffer. Returns zero (success) or
5460 negative error code. */
5461 static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count)
5463 int i, cnt, res, offset;
5465 for (i=0, offset=st_bp->read_pointer;
5466 i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
5467 offset -= st_bp->sg[i].length;
5468 if (i == st_bp->sg_segs) { /* Should never happen */
5469 printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n");
5470 return (-EIO);
5472 for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
5473 cnt = st_bp->sg[i].length - offset < do_count ?
5474 st_bp->sg[i].length - offset : do_count;
5475 res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt);
5476 if (res)
5477 return (-EFAULT);
5478 do_count -= cnt;
5479 st_bp->buffer_bytes -= cnt;
5480 st_bp->read_pointer += cnt;
5481 ubp += cnt;
5482 offset = 0;
5484 if (do_count) { /* Should never happen */
5485 printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count);
5486 return (-EIO);
5488 return 0;
5491 /* Sets the tail of the buffer after fill point to zero.
5492 Returns zero (success) or negative error code. */
5493 static int osst_zero_buffer_tail(struct osst_buffer *st_bp)
5495 int i, offset, do_count, cnt;
5497 for (i = 0, offset = st_bp->buffer_bytes;
5498 i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
5499 offset -= st_bp->sg[i].length;
5500 if (i == st_bp->sg_segs) { /* Should never happen */
5501 printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n");
5502 return (-EIO);
5504 for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes;
5505 i < st_bp->sg_segs && do_count > 0; i++) {
5506 cnt = st_bp->sg[i].length - offset < do_count ?
5507 st_bp->sg[i].length - offset : do_count ;
5508 memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt);
5509 do_count -= cnt;
5510 offset = 0;
5512 if (do_count) { /* Should never happen */
5513 printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count);
5514 return (-EIO);
5516 return 0;
5519 /* Copy a osst 32K chunk of memory into the buffer.
5520 Returns zero (success) or negative error code. */
5521 static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
5523 int i, cnt, do_count = OS_DATA_SIZE;
5525 for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
5526 cnt = st_bp->sg[i].length < do_count ?
5527 st_bp->sg[i].length : do_count ;
5528 memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt);
5529 do_count -= cnt;
5530 ptr += cnt;
5532 if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */
5533 printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n",
5534 do_count, i);
5535 return (-EIO);
5537 return 0;
5540 /* Copy a osst 32K chunk of memory from the buffer.
5541 Returns zero (success) or negative error code. */
5542 static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
5544 int i, cnt, do_count = OS_DATA_SIZE;
5546 for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
5547 cnt = st_bp->sg[i].length < do_count ?
5548 st_bp->sg[i].length : do_count ;
5549 memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt);
5550 do_count -= cnt;
5551 ptr += cnt;
5553 if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */
5554 printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n",
5555 do_count, i);
5556 return (-EIO);
5558 return 0;
5562 /* Module housekeeping */
5564 static void validate_options (void)
5566 if (max_dev > 0)
5567 osst_max_dev = max_dev;
5568 if (write_threshold_kbs > 0)
5569 osst_write_threshold = write_threshold_kbs * ST_KILOBYTE;
5570 if (osst_write_threshold > osst_buffer_size)
5571 osst_write_threshold = osst_buffer_size;
5572 if (max_sg_segs >= OSST_FIRST_SG)
5573 osst_max_sg_segs = max_sg_segs;
5574 #if DEBUG
5575 printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n",
5576 osst_max_dev, osst_write_threshold, osst_max_sg_segs);
5577 #endif
5580 #ifndef MODULE
5581 /* Set the boot options. Syntax: osst=xxx,yyy,...
5582 where xxx is write threshold in 1024 byte blocks,
5583 and yyy is number of s/g segments to use. */
5584 static int __init osst_setup (char *str)
5586 int i, ints[5];
5587 char *stp;
5589 stp = get_options(str, ARRAY_SIZE(ints), ints);
5591 if (ints[0] > 0) {
5592 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
5593 *parms[i].val = ints[i + 1];
5594 } else {
5595 while (stp != NULL) {
5596 for (i = 0; i < ARRAY_SIZE(parms); i++) {
5597 int len = strlen(parms[i].name);
5598 if (!strncmp(stp, parms[i].name, len) &&
5599 (*(stp + len) == ':' || *(stp + len) == '=')) {
5600 *parms[i].val =
5601 simple_strtoul(stp + len + 1, NULL, 0);
5602 break;
5605 if (i >= ARRAY_SIZE(parms))
5606 printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n",
5607 stp);
5608 stp = strchr(stp, ',');
5609 if (stp)
5610 stp++;
5614 return 1;
5617 __setup("osst=", osst_setup);
5619 #endif
5621 static const struct file_operations osst_fops = {
5622 .owner = THIS_MODULE,
5623 .read = osst_read,
5624 .write = osst_write,
5625 .unlocked_ioctl = osst_ioctl,
5626 #ifdef CONFIG_COMPAT
5627 .compat_ioctl = osst_compat_ioctl,
5628 #endif
5629 .open = os_scsi_tape_open,
5630 .flush = os_scsi_tape_flush,
5631 .release = os_scsi_tape_close,
5632 .llseek = noop_llseek,
5635 static int osst_supports(struct scsi_device * SDp)
5637 struct osst_support_data {
5638 char *vendor;
5639 char *model;
5640 char *rev;
5641 char *driver_hint; /* Name of the correct driver, NULL if unknown */
5644 static struct osst_support_data support_list[] = {
5645 /* {"XXX", "Yy-", "", NULL}, example */
5646 SIGS_FROM_OSST,
5647 {NULL, }};
5649 struct osst_support_data *rp;
5651 /* We are willing to drive OnStream SC-x0 as well as the
5652 * * IDE, ParPort, FireWire, USB variants, if accessible by
5653 * * emulation layer (ide-scsi, usb-storage, ...) */
5655 for (rp=&(support_list[0]); rp->vendor != NULL; rp++)
5656 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
5657 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
5658 !strncmp(rp->rev, SDp->rev, strlen(rp->rev)))
5659 return 1;
5660 return 0;
5664 * sysfs support for osst driver parameter information
5667 static ssize_t osst_version_show(struct device_driver *ddd, char *buf)
5669 return snprintf(buf, PAGE_SIZE, "%s\n", osst_version);
5672 static DRIVER_ATTR(version, S_IRUGO, osst_version_show, NULL);
5674 static int osst_create_sysfs_files(struct device_driver *sysfs)
5676 return driver_create_file(sysfs, &driver_attr_version);
5679 static void osst_remove_sysfs_files(struct device_driver *sysfs)
5681 driver_remove_file(sysfs, &driver_attr_version);
5685 * sysfs support for accessing ADR header information
5688 static ssize_t osst_adr_rev_show(struct device *dev,
5689 struct device_attribute *attr, char *buf)
5691 struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
5692 ssize_t l = 0;
5694 if (STp && STp->header_ok && STp->linux_media)
5695 l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev);
5696 return l;
5699 DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL);
5701 static ssize_t osst_linux_media_version_show(struct device *dev,
5702 struct device_attribute *attr,
5703 char *buf)
5705 struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
5706 ssize_t l = 0;
5708 if (STp && STp->header_ok && STp->linux_media)
5709 l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version);
5710 return l;
5713 DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL);
5715 static ssize_t osst_capacity_show(struct device *dev,
5716 struct device_attribute *attr, char *buf)
5718 struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
5719 ssize_t l = 0;
5721 if (STp && STp->header_ok && STp->linux_media)
5722 l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity);
5723 return l;
5726 DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL);
5728 static ssize_t osst_first_data_ppos_show(struct device *dev,
5729 struct device_attribute *attr,
5730 char *buf)
5732 struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
5733 ssize_t l = 0;
5735 if (STp && STp->header_ok && STp->linux_media)
5736 l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos);
5737 return l;
5740 DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL);
5742 static ssize_t osst_eod_frame_ppos_show(struct device *dev,
5743 struct device_attribute *attr,
5744 char *buf)
5746 struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
5747 ssize_t l = 0;
5749 if (STp && STp->header_ok && STp->linux_media)
5750 l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos);
5751 return l;
5754 DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL);
5756 static ssize_t osst_filemark_cnt_show(struct device *dev,
5757 struct device_attribute *attr, char *buf)
5759 struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
5760 ssize_t l = 0;
5762 if (STp && STp->header_ok && STp->linux_media)
5763 l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt);
5764 return l;
5767 DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL);
5769 static struct class *osst_sysfs_class;
5771 static int osst_sysfs_init(void)
5773 osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape");
5774 if (IS_ERR(osst_sysfs_class)) {
5775 printk(KERN_ERR "osst :W: Unable to register sysfs class\n");
5776 return PTR_ERR(osst_sysfs_class);
5779 return 0;
5782 static void osst_sysfs_destroy(dev_t dev)
5784 device_destroy(osst_sysfs_class, dev);
5787 static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name)
5789 struct device *osst_member;
5790 int err;
5792 osst_member = device_create(osst_sysfs_class, device, dev, STp,
5793 "%s", name);
5794 if (IS_ERR(osst_member)) {
5795 printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
5796 return PTR_ERR(osst_member);
5799 err = device_create_file(osst_member, &dev_attr_ADR_rev);
5800 if (err)
5801 goto err_out;
5802 err = device_create_file(osst_member, &dev_attr_media_version);
5803 if (err)
5804 goto err_out;
5805 err = device_create_file(osst_member, &dev_attr_capacity);
5806 if (err)
5807 goto err_out;
5808 err = device_create_file(osst_member, &dev_attr_BOT_frame);
5809 if (err)
5810 goto err_out;
5811 err = device_create_file(osst_member, &dev_attr_EOD_frame);
5812 if (err)
5813 goto err_out;
5814 err = device_create_file(osst_member, &dev_attr_file_count);
5815 if (err)
5816 goto err_out;
5818 return 0;
5820 err_out:
5821 osst_sysfs_destroy(dev);
5822 return err;
5825 static void osst_sysfs_cleanup(void)
5827 class_destroy(osst_sysfs_class);
5831 * osst startup / cleanup code
5834 static int osst_probe(struct device *dev)
5836 struct scsi_device * SDp = to_scsi_device(dev);
5837 struct osst_tape * tpnt;
5838 struct st_modedef * STm;
5839 struct st_partstat * STps;
5840 struct osst_buffer * buffer;
5841 struct gendisk * drive;
5842 int i, dev_num, err = -ENODEV;
5844 if (SDp->type != TYPE_TAPE || !osst_supports(SDp))
5845 return -ENODEV;
5847 drive = alloc_disk(1);
5848 if (!drive) {
5849 printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n");
5850 return -ENODEV;
5853 /* if this is the first attach, build the infrastructure */
5854 write_lock(&os_scsi_tapes_lock);
5855 if (os_scsi_tapes == NULL) {
5856 os_scsi_tapes = kmalloc(osst_max_dev * sizeof(struct osst_tape *), GFP_ATOMIC);
5857 if (os_scsi_tapes == NULL) {
5858 write_unlock(&os_scsi_tapes_lock);
5859 printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n");
5860 goto out_put_disk;
5862 for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL;
5865 if (osst_nr_dev >= osst_max_dev) {
5866 write_unlock(&os_scsi_tapes_lock);
5867 printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev);
5868 goto out_put_disk;
5871 /* find a free minor number */
5872 for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++)
5874 if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)");
5875 dev_num = i;
5877 /* allocate a struct osst_tape for this device */
5878 tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC);
5879 if (!tpnt) {
5880 write_unlock(&os_scsi_tapes_lock);
5881 printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n");
5882 goto out_put_disk;
5885 /* allocate a buffer for this device */
5886 i = SDp->host->sg_tablesize;
5887 if (osst_max_sg_segs < i)
5888 i = osst_max_sg_segs;
5889 buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i);
5890 if (buffer == NULL) {
5891 write_unlock(&os_scsi_tapes_lock);
5892 printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n");
5893 kfree(tpnt);
5894 goto out_put_disk;
5896 os_scsi_tapes[dev_num] = tpnt;
5897 tpnt->buffer = buffer;
5898 tpnt->device = SDp;
5899 drive->private_data = &tpnt->driver;
5900 sprintf(drive->disk_name, "osst%d", dev_num);
5901 tpnt->driver = &osst_template;
5902 tpnt->drive = drive;
5903 tpnt->in_use = 0;
5904 tpnt->capacity = 0xfffff;
5905 tpnt->dirty = 0;
5906 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
5907 tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
5908 tpnt->density = 0;
5909 tpnt->do_auto_lock = OSST_AUTO_LOCK;
5910 tpnt->can_bsr = OSST_IN_FILE_POS;
5911 tpnt->can_partitions = 0;
5912 tpnt->two_fm = OSST_TWO_FM;
5913 tpnt->fast_mteom = OSST_FAST_MTEOM;
5914 tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */
5915 tpnt->write_threshold = osst_write_threshold;
5916 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
5917 tpnt->partition = 0;
5918 tpnt->new_partition = 0;
5919 tpnt->nbr_partitions = 0;
5920 tpnt->min_block = 512;
5921 tpnt->max_block = OS_DATA_SIZE;
5922 tpnt->timeout = OSST_TIMEOUT;
5923 tpnt->long_timeout = OSST_LONG_TIMEOUT;
5925 /* Recognize OnStream tapes */
5926 /* We don't need to test for OnStream, as this has been done in detect () */
5927 tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev);
5928 tpnt->omit_blklims = 1;
5930 tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) ||
5931 (strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp);
5932 tpnt->frame_in_buffer = 0;
5933 tpnt->header_ok = 0;
5934 tpnt->linux_media = 0;
5935 tpnt->header_cache = NULL;
5937 for (i=0; i < ST_NBR_MODES; i++) {
5938 STm = &(tpnt->modes[i]);
5939 STm->defined = 0;
5940 STm->sysv = OSST_SYSV;
5941 STm->defaults_for_writes = 0;
5942 STm->do_async_writes = OSST_ASYNC_WRITES;
5943 STm->do_buffer_writes = OSST_BUFFER_WRITES;
5944 STm->do_read_ahead = OSST_READ_AHEAD;
5945 STm->default_compression = ST_DONT_TOUCH;
5946 STm->default_blksize = 512;
5947 STm->default_density = (-1); /* No forced density */
5950 for (i=0; i < ST_NBR_PARTITIONS; i++) {
5951 STps = &(tpnt->ps[i]);
5952 STps->rw = ST_IDLE;
5953 STps->eof = ST_NOEOF;
5954 STps->at_sm = 0;
5955 STps->last_block_valid = 0;
5956 STps->drv_block = (-1);
5957 STps->drv_file = (-1);
5960 tpnt->current_mode = 0;
5961 tpnt->modes[0].defined = 1;
5962 tpnt->modes[2].defined = 1;
5963 tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0;
5965 mutex_init(&tpnt->lock);
5966 osst_nr_dev++;
5967 write_unlock(&os_scsi_tapes_lock);
5970 char name[8];
5972 /* Rewind entry */
5973 err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt));
5974 if (err)
5975 goto out_free_buffer;
5977 /* No-rewind entry */
5978 snprintf(name, 8, "%s%s", "n", tape_name(tpnt));
5979 err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name);
5980 if (err)
5981 goto out_free_sysfs1;
5984 sdev_printk(KERN_INFO, SDp,
5985 "osst :I: Attached OnStream %.5s tape as %s\n",
5986 SDp->model, tape_name(tpnt));
5988 return 0;
5990 out_free_sysfs1:
5991 osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num));
5992 out_free_buffer:
5993 kfree(buffer);
5994 out_put_disk:
5995 put_disk(drive);
5996 return err;
5999 static int osst_remove(struct device *dev)
6001 struct scsi_device * SDp = to_scsi_device(dev);
6002 struct osst_tape * tpnt;
6003 int i;
6005 if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0))
6006 return 0;
6008 write_lock(&os_scsi_tapes_lock);
6009 for(i=0; i < osst_max_dev; i++) {
6010 if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) {
6011 osst_sysfs_destroy(MKDEV(OSST_MAJOR, i));
6012 osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128));
6013 tpnt->device = NULL;
6014 put_disk(tpnt->drive);
6015 os_scsi_tapes[i] = NULL;
6016 osst_nr_dev--;
6017 write_unlock(&os_scsi_tapes_lock);
6018 vfree(tpnt->header_cache);
6019 if (tpnt->buffer) {
6020 normalize_buffer(tpnt->buffer);
6021 kfree(tpnt->buffer);
6023 kfree(tpnt);
6024 return 0;
6027 write_unlock(&os_scsi_tapes_lock);
6028 return 0;
6031 static int __init init_osst(void)
6033 int err;
6035 printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid);
6037 validate_options();
6039 err = osst_sysfs_init();
6040 if (err)
6041 return err;
6043 err = register_chrdev(OSST_MAJOR, "osst", &osst_fops);
6044 if (err < 0) {
6045 printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR);
6046 goto err_out;
6049 err = scsi_register_driver(&osst_template.gendrv);
6050 if (err)
6051 goto err_out_chrdev;
6053 err = osst_create_sysfs_files(&osst_template.gendrv);
6054 if (err)
6055 goto err_out_scsidrv;
6057 return 0;
6059 err_out_scsidrv:
6060 scsi_unregister_driver(&osst_template.gendrv);
6061 err_out_chrdev:
6062 unregister_chrdev(OSST_MAJOR, "osst");
6063 err_out:
6064 osst_sysfs_cleanup();
6065 return err;
6068 static void __exit exit_osst (void)
6070 int i;
6071 struct osst_tape * STp;
6073 osst_remove_sysfs_files(&osst_template.gendrv);
6074 scsi_unregister_driver(&osst_template.gendrv);
6075 unregister_chrdev(OSST_MAJOR, "osst");
6076 osst_sysfs_cleanup();
6078 if (os_scsi_tapes) {
6079 for (i=0; i < osst_max_dev; ++i) {
6080 if (!(STp = os_scsi_tapes[i])) continue;
6081 /* This is defensive, supposed to happen during detach */
6082 vfree(STp->header_cache);
6083 if (STp->buffer) {
6084 normalize_buffer(STp->buffer);
6085 kfree(STp->buffer);
6087 put_disk(STp->drive);
6088 kfree(STp);
6090 kfree(os_scsi_tapes);
6092 printk(KERN_INFO "osst :I: Unloaded.\n");
6095 module_init(init_osst);
6096 module_exit(exit_osst);