?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / tty / serial / sb1250-duart.c
blob6bc2e3f876f4175bb4bedcd4db38c5895d7cba1f
1 /*
2 * Support for the asynchronous serial interface (DUART) included
3 * in the BCM1250 and derived System-On-a-Chip (SOC) devices.
4 *
5 * Copyright (c) 2007 Maciej W. Rozycki
6 *
7 * Derived from drivers/char/sb1250_duart.c for which the following
8 * copyright applies:
9 *
10 * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
16 *
17 * References:
18 *
19 * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation
20 */
21
22 #if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
23 #define SUPPORT_SYSRQ
24 #endif
25
26 #include <linux/compiler.h>
27 #include <linux/console.h>
28 #include <linux/delay.h>
29 #include <linux/errno.h>
30 #include <linux/init.h>
31 #include <linux/interrupt.h>
32 #include <linux/ioport.h>
33 #include <linux/kernel.h>
34 #include <linux/major.h>
35 #include <linux/serial.h>
36 #include <linux/serial_core.h>
37 #include <linux/spinlock.h>
38 #include <linux/sysrq.h>
39 #include <linux/tty.h>
40 #include <linux/types.h>
41
42 #include <linux/atomic.h>
43 #include <asm/io.h>
44 #include <asm/war.h>
45
46 #include <asm/sibyte/sb1250.h>
47 #include <asm/sibyte/sb1250_uart.h>
48 #include <asm/sibyte/swarm.h>
49
50
51 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
52 #include <asm/sibyte/bcm1480_regs.h>
53 #include <asm/sibyte/bcm1480_int.h>
54
55 #define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0)
56 #define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0)
57 #define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line))
58
59 #define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING
60
61 #define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line)
62 #define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line)
63 #define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line)
64
65 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
66 #include <asm/sibyte/sb1250_regs.h>
67 #include <asm/sibyte/sb1250_int.h>
68
69 #define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0)
70 #define SBD_CTRLREGS(line) A_DUART_CTRLREG(0)
71 #define SBD_INT(line) (K_INT_UART_0 + (line))
72
73 #else
74 #error invalid SB1250 UART configuration
75
76 #endif
77
78
79 MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
80 MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver");
81 MODULE_LICENSE("GPL");
82
83
84 #define DUART_MAX_CHIP 2
85 #define DUART_MAX_SIDE 2
86
87 /*
88 * Per-port state.
89 */
90 struct sbd_port {
91 struct sbd_duart *duart;
92 struct uart_port port;
93 unsigned char __iomem *memctrl;
94 int tx_stopped;
95 int initialised;
96 };
97
98 /*
99 * Per-DUART state for the shared register space.
100 */
101 struct sbd_duart {
102 struct sbd_port sport[2];
103 unsigned long mapctrl;
104 atomic_t map_guard;
105 };
106
107 #define to_sport(uport) container_of(uport, struct sbd_port, port)
108
109 static struct sbd_duart sbd_duarts[DUART_MAX_CHIP];
110
111
112 /*
113 * Reading and writing SB1250 DUART registers.
114 *
115 * There are three register spaces: two per-channel ones and
116 * a shared one. We have to define accessors appropriately.
117 * All registers are 64-bit and all but the Baud Rate Clock
118 * registers only define 8 least significant bits. There is
119 * also a workaround to take into account. Raw accessors use
120 * the full register width, but cooked ones truncate it
121 * intentionally so that the rest of the driver does not care.
122 */
123 static u64 __read_sbdchn(struct sbd_port *sport, int reg)
124 {
125 void __iomem *csr = sport->port.membase + reg;
126
127 return __raw_readq(csr);
128 }
129
130 static u64 __read_sbdshr(struct sbd_port *sport, int reg)
131 {
132 void __iomem *csr = sport->memctrl + reg;
133
134 return __raw_readq(csr);
135 }
136
137 static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value)
138 {
139 void __iomem *csr = sport->port.membase + reg;
140
141 __raw_writeq(value, csr);
142 }
143
144 static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value)
145 {
146 void __iomem *csr = sport->memctrl + reg;
147
148 __raw_writeq(value, csr);
149 }
150
151 /*
152 * In bug 1956, we get glitches that can mess up uart registers. This
153 * "read-mode-reg after any register access" is an accepted workaround.
154 */
155 static void __war_sbd1956(struct sbd_port *sport)
156 {
157 __read_sbdchn(sport, R_DUART_MODE_REG_1);
158 __read_sbdchn(sport, R_DUART_MODE_REG_2);
159 }
160
161 static unsigned char read_sbdchn(struct sbd_port *sport, int reg)
162 {
163 unsigned char retval;
164
165 retval = __read_sbdchn(sport, reg);
166 if (SIBYTE_1956_WAR)
167 __war_sbd1956(sport);
168 return retval;
169 }
170
171 static unsigned char read_sbdshr(struct sbd_port *sport, int reg)
172 {
173 unsigned char retval;
174
175 retval = __read_sbdshr(sport, reg);
176 if (SIBYTE_1956_WAR)
177 __war_sbd1956(sport);
178 return retval;
179 }
180
181 static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value)
182 {
183 __write_sbdchn(sport, reg, value);
184 if (SIBYTE_1956_WAR)
185 __war_sbd1956(sport);
186 }
187
188 static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value)
189 {
190 __write_sbdshr(sport, reg, value);
191 if (SIBYTE_1956_WAR)
192 __war_sbd1956(sport);
193 }
194
195
196 static int sbd_receive_ready(struct sbd_port *sport)
197 {
198 return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY;
199 }
200
201 static int sbd_receive_drain(struct sbd_port *sport)
202 {
203 int loops = 10000;
204
205 while (sbd_receive_ready(sport) && --loops)
206 read_sbdchn(sport, R_DUART_RX_HOLD);
207 return loops;
208 }
209
210 static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport)
211 {
212 return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY;
213 }
214
215 static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport)
216 {
217 int loops = 10000;
218
219 while (!sbd_transmit_ready(sport) && --loops)
220 udelay(2);
221 return loops;
222 }
223
224 static int sbd_transmit_empty(struct sbd_port *sport)
225 {
226 return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT;
227 }
228
229 static int sbd_line_drain(struct sbd_port *sport)
230 {
231 int loops = 10000;
232
233 while (!sbd_transmit_empty(sport) && --loops)
234 udelay(2);
235 return loops;
236 }
237
238
239 static unsigned int sbd_tx_empty(struct uart_port *uport)
240 {
241 struct sbd_port *sport = to_sport(uport);
242
243 return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0;
244 }
245
246 static unsigned int sbd_get_mctrl(struct uart_port *uport)
247 {
248 struct sbd_port *sport = to_sport(uport);
249 unsigned int mctrl, status;
250
251 status = read_sbdshr(sport, R_DUART_IN_PORT);
252 status >>= (uport->line) % 2;
253 mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) |
254 (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) |
255 (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) |
256 (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0);
257 return mctrl;
258 }
259
260 static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl)
261 {
262 struct sbd_port *sport = to_sport(uport);
263 unsigned int clr = 0, set = 0, mode2;
264
265 if (mctrl & TIOCM_DTR)
266 set |= M_DUART_SET_OPR2;
267 else
268 clr |= M_DUART_CLR_OPR2;
269 if (mctrl & TIOCM_RTS)
270 set |= M_DUART_SET_OPR0;
271 else
272 clr |= M_DUART_CLR_OPR0;
273 clr <<= (uport->line) % 2;
274 set <<= (uport->line) % 2;
275
276 mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2);
277 mode2 &= ~M_DUART_CHAN_MODE;
278 if (mctrl & TIOCM_LOOP)
279 mode2 |= V_DUART_CHAN_MODE_LCL_LOOP;
280 else
281 mode2 |= V_DUART_CHAN_MODE_NORMAL;
282
283 write_sbdshr(sport, R_DUART_CLEAR_OPR, clr);
284 write_sbdshr(sport, R_DUART_SET_OPR, set);
285 write_sbdchn(sport, R_DUART_MODE_REG_2, mode2);
286 }
287
288 static void sbd_stop_tx(struct uart_port *uport)
289 {
290 struct sbd_port *sport = to_sport(uport);
291
292 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS);
293 sport->tx_stopped = 1;
294 };
295
296 static void sbd_start_tx(struct uart_port *uport)
297 {
298 struct sbd_port *sport = to_sport(uport);
299 unsigned int mask;
300
301 /* Enable tx interrupts. */
302 mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2));
303 mask |= M_DUART_IMR_TX;
304 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask);
305
306 /* Go!, go!, go!... */
307 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN);
308 sport->tx_stopped = 0;
309 };
310
311 static void sbd_stop_rx(struct uart_port *uport)
312 {
313 struct sbd_port *sport = to_sport(uport);
314
315 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0);
316 };
317
318 static void sbd_enable_ms(struct uart_port *uport)
319 {
320 struct sbd_port *sport = to_sport(uport);
321
322 write_sbdchn(sport, R_DUART_AUXCTL_X,
323 M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA);
324 }
325
326 static void sbd_break_ctl(struct uart_port *uport, int break_state)
327 {
328 struct sbd_port *sport = to_sport(uport);
329
330 if (break_state == -1)
331 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK);
332 else
333 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK);
334 }
335
336
337 static void sbd_receive_chars(struct sbd_port *sport)
338 {
339 struct uart_port *uport = &sport->port;
340 struct uart_icount *icount;
341 unsigned int status, ch, flag;
342 int count;
343
344 for (count = 16; count; count--) {
345 status = read_sbdchn(sport, R_DUART_STATUS);
346 if (!(status & M_DUART_RX_RDY))
347 break;
348
349 ch = read_sbdchn(sport, R_DUART_RX_HOLD);
350
351 flag = TTY_NORMAL;
352
353 icount = &uport->icount;
354 icount->rx++;
355
356 if (unlikely(status &
357 (M_DUART_RCVD_BRK | M_DUART_FRM_ERR |
358 M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) {
359 if (status & M_DUART_RCVD_BRK) {
360 icount->brk++;
361 if (uart_handle_break(uport))
362 continue;
363 } else if (status & M_DUART_FRM_ERR)
364 icount->frame++;
365 else if (status & M_DUART_PARITY_ERR)
366 icount->parity++;
367 if (status & M_DUART_OVRUN_ERR)
368 icount->overrun++;
369
370 status &= uport->read_status_mask;
371 if (status & M_DUART_RCVD_BRK)
372 flag = TTY_BREAK;
373 else if (status & M_DUART_FRM_ERR)
374 flag = TTY_FRAME;
375 else if (status & M_DUART_PARITY_ERR)
376 flag = TTY_PARITY;
377 }
378
379 if (uart_handle_sysrq_char(uport, ch))
380 continue;
381
382 uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
383 }
384
385 tty_flip_buffer_push(uport->state->port.tty);
386 }
387
388 static void sbd_transmit_chars(struct sbd_port *sport)
389 {
390 struct uart_port *uport = &sport->port;
391 struct circ_buf *xmit = &sport->port.state->xmit;
392 unsigned int mask;
393 int stop_tx;
394
395 /* XON/XOFF chars. */
396 if (sport->port.x_char) {
397 write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char);
398 sport->port.icount.tx++;
399 sport->port.x_char = 0;
400 return;
401 }
402
403 /* If nothing to do or stopped or hardware stopped. */
404 stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port));
405
406 /* Send char. */
407 if (!stop_tx) {
408 write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]);
409 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
410 sport->port.icount.tx++;
411
412 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
413 uart_write_wakeup(&sport->port);
414 }
415
416 /* Are we are done? */
417 if (stop_tx || uart_circ_empty(xmit)) {
418 /* Disable tx interrupts. */
419 mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2));
420 mask &= ~M_DUART_IMR_TX;
421 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask);
422 }
423 }
424
425 static void sbd_status_handle(struct sbd_port *sport)
426 {
427 struct uart_port *uport = &sport->port;
428 unsigned int delta;
429
430 delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2));
431 delta >>= (uport->line) % 2;
432
433 if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG))
434 uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL));
435
436 if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG))
437 uport->icount.dsr++;
438
439 if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) <<
440 S_DUART_IN_PIN_CHNG))
441 wake_up_interruptible(&uport->state->port.delta_msr_wait);
442 }
443
444 static irqreturn_t sbd_interrupt(int irq, void *dev_id)
445 {
446 struct sbd_port *sport = dev_id;
447 struct uart_port *uport = &sport->port;
448 irqreturn_t status = IRQ_NONE;
449 unsigned int intstat;
450 int count;
451
452 for (count = 16; count; count--) {
453 intstat = read_sbdshr(sport,
454 R_DUART_ISRREG((uport->line) % 2));
455 intstat &= read_sbdshr(sport,
456 R_DUART_IMRREG((uport->line) % 2));
457 intstat &= M_DUART_ISR_ALL;
458 if (!intstat)
459 break;
460
461 if (intstat & M_DUART_ISR_RX)
462 sbd_receive_chars(sport);
463 if (intstat & M_DUART_ISR_IN)
464 sbd_status_handle(sport);
465 if (intstat & M_DUART_ISR_TX)
466 sbd_transmit_chars(sport);
467
468 status = IRQ_HANDLED;
469 }
470
471 return status;
472 }
473
474
475 static int sbd_startup(struct uart_port *uport)
476 {
477 struct sbd_port *sport = to_sport(uport);
478 unsigned int mode1;
479 int ret;
480
481 ret = request_irq(sport->port.irq, sbd_interrupt,
482 IRQF_SHARED, "sb1250-duart", sport);
483 if (ret)
484 return ret;
485
486 /* Clear the receive FIFO. */
487 sbd_receive_drain(sport);
488
489 /* Clear the interrupt registers. */
490 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT);
491 read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2));
492
493 /* Set rx/tx interrupt to FIFO available. */
494 mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1);
495 mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT);
496 write_sbdchn(sport, R_DUART_MODE_REG_1, mode1);
497
498 /* Disable tx, enable rx. */
499 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN);
500 sport->tx_stopped = 1;
501
502 /* Enable interrupts. */
503 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2),
504 M_DUART_IMR_IN | M_DUART_IMR_RX);
505
506 return 0;
507 }
508
509 static void sbd_shutdown(struct uart_port *uport)
510 {
511 struct sbd_port *sport = to_sport(uport);
512
513 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS);
514 sport->tx_stopped = 1;
515 free_irq(sport->port.irq, sport);
516 }
517
518
519 static void sbd_init_port(struct sbd_port *sport)
520 {
521 struct uart_port *uport = &sport->port;
522
523 if (sport->initialised)
524 return;
525
526 /* There is no DUART reset feature, so just set some sane defaults. */
527 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX);
528 write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX);
529 write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8);
530 write_sbdchn(sport, R_DUART_MODE_REG_2, 0);
531 write_sbdchn(sport, R_DUART_FULL_CTL,
532 V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15));
533 write_sbdchn(sport, R_DUART_OPCR_X, 0);
534 write_sbdchn(sport, R_DUART_AUXCTL_X, 0);
535 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0);
536
537 sport->initialised = 1;
538 }
539
540 static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios,
541 struct ktermios *old_termios)
542 {
543 struct sbd_port *sport = to_sport(uport);
544 unsigned int mode1 = 0, mode2 = 0, aux = 0;
545 unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0;
546 unsigned int oldmode1, oldmode2, oldaux;
547 unsigned int baud, brg;
548 unsigned int command;
549
550 mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD |
551 M_DUART_BITS_PER_CHAR);
552 mode2mask |= ~M_DUART_STOP_BIT_LEN_2;
553 auxmask |= ~M_DUART_CTS_CHNG_ENA;
554
555 /* Byte size. */
556 switch (termios->c_cflag & CSIZE) {
557 case CS5:
558 case CS6:
559 /* Unsupported, leave unchanged. */
560 mode1mask |= M_DUART_PARITY_MODE;
561 break;
562 case CS7:
563 mode1 |= V_DUART_BITS_PER_CHAR_7;
564 break;
565 case CS8:
566 default:
567 mode1 |= V_DUART_BITS_PER_CHAR_8;
568 break;
569 }
570
571 /* Parity and stop bits. */
572 if (termios->c_cflag & CSTOPB)
573 mode2 |= M_DUART_STOP_BIT_LEN_2;
574 else
575 mode2 |= M_DUART_STOP_BIT_LEN_1;
576 if (termios->c_cflag & PARENB)
577 mode1 |= V_DUART_PARITY_MODE_ADD;
578 else
579 mode1 |= V_DUART_PARITY_MODE_NONE;
580 if (termios->c_cflag & PARODD)
581 mode1 |= M_DUART_PARITY_TYPE_ODD;
582 else
583 mode1 |= M_DUART_PARITY_TYPE_EVEN;
584
585 baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000);
586 brg = V_DUART_BAUD_RATE(baud);
587 /* The actual lower bound is 1221bps, so compensate. */
588 if (brg > M_DUART_CLK_COUNTER)
589 brg = M_DUART_CLK_COUNTER;
590
591 uart_update_timeout(uport, termios->c_cflag, baud);
592
593 uport->read_status_mask = M_DUART_OVRUN_ERR;
594 if (termios->c_iflag & INPCK)
595 uport->read_status_mask |= M_DUART_FRM_ERR |
596 M_DUART_PARITY_ERR;
597 if (termios->c_iflag & (BRKINT | PARMRK))
598 uport->read_status_mask |= M_DUART_RCVD_BRK;
599
600 uport->ignore_status_mask = 0;
601 if (termios->c_iflag & IGNPAR)
602 uport->ignore_status_mask |= M_DUART_FRM_ERR |
603 M_DUART_PARITY_ERR;
604 if (termios->c_iflag & IGNBRK) {
605 uport->ignore_status_mask |= M_DUART_RCVD_BRK;
606 if (termios->c_iflag & IGNPAR)
607 uport->ignore_status_mask |= M_DUART_OVRUN_ERR;
608 }
609
610 if (termios->c_cflag & CREAD)
611 command = M_DUART_RX_EN;
612 else
613 command = M_DUART_RX_DIS;
614
615 if (termios->c_cflag & CRTSCTS)
616 aux |= M_DUART_CTS_CHNG_ENA;
617 else
618 aux &= ~M_DUART_CTS_CHNG_ENA;
619
620 spin_lock(&uport->lock);
621
622 if (sport->tx_stopped)
623 command |= M_DUART_TX_DIS;
624 else
625 command |= M_DUART_TX_EN;
626
627 oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask;
628 oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask;
629 oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask;
630
631 if (!sport->tx_stopped)
632 sbd_line_drain(sport);
633 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS);
634
635 write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1);
636 write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2);
637 write_sbdchn(sport, R_DUART_CLK_SEL, brg);
638 write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux);
639
640 write_sbdchn(sport, R_DUART_CMD, command);
641
642 spin_unlock(&uport->lock);
643 }
644
645
646 static const char *sbd_type(struct uart_port *uport)
647 {
648 return "SB1250 DUART";
649 }
650
651 static void sbd_release_port(struct uart_port *uport)
652 {
653 struct sbd_port *sport = to_sport(uport);
654 struct sbd_duart *duart = sport->duart;
655 int map_guard;
656
657 iounmap(sport->memctrl);
658 sport->memctrl = NULL;
659 iounmap(uport->membase);
660 uport->membase = NULL;
661
662 map_guard = atomic_add_return(-1, &duart->map_guard);
663 if (!map_guard)
664 release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING);
665 release_mem_region(uport->mapbase, DUART_CHANREG_SPACING);
666 }
667
668 static int sbd_map_port(struct uart_port *uport)
669 {
670 const char *err = KERN_ERR "sbd: Cannot map MMIO\n";
671 struct sbd_port *sport = to_sport(uport);
672 struct sbd_duart *duart = sport->duart;
673
674 if (!uport->membase)
675 uport->membase = ioremap_nocache(uport->mapbase,
676 DUART_CHANREG_SPACING);
677 if (!uport->membase) {
678 printk(err);
679 return -ENOMEM;
680 }
681
682 if (!sport->memctrl)
683 sport->memctrl = ioremap_nocache(duart->mapctrl,
684 DUART_CHANREG_SPACING);
685 if (!sport->memctrl) {
686 printk(err);
687 iounmap(uport->membase);
688 uport->membase = NULL;
689 return -ENOMEM;
690 }
691
692 return 0;
693 }
694
695 static int sbd_request_port(struct uart_port *uport)
696 {
697 const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n";
698 struct sbd_duart *duart = to_sport(uport)->duart;
699 int map_guard;
700 int ret = 0;
701
702 if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING,
703 "sb1250-duart")) {
704 printk(err);
705 return -EBUSY;
706 }
707 map_guard = atomic_add_return(1, &duart->map_guard);
708 if (map_guard == 1) {
709 if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING,
710 "sb1250-duart")) {
711 atomic_add(-1, &duart->map_guard);
712 printk(err);
713 ret = -EBUSY;
714 }
715 }
716 if (!ret) {
717 ret = sbd_map_port(uport);
718 if (ret) {
719 map_guard = atomic_add_return(-1, &duart->map_guard);
720 if (!map_guard)
721 release_mem_region(duart->mapctrl,
722 DUART_CHANREG_SPACING);
723 }
724 }
725 if (ret) {
726 release_mem_region(uport->mapbase, DUART_CHANREG_SPACING);
727 return ret;
728 }
729 return 0;
730 }
731
732 static void sbd_config_port(struct uart_port *uport, int flags)
733 {
734 struct sbd_port *sport = to_sport(uport);
735
736 if (flags & UART_CONFIG_TYPE) {
737 if (sbd_request_port(uport))
738 return;
739
740 uport->type = PORT_SB1250_DUART;
741
742 sbd_init_port(sport);
743 }
744 }
745
746 static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser)
747 {
748 int ret = 0;
749
750 if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART)
751 ret = -EINVAL;
752 if (ser->irq != uport->irq)
753 ret = -EINVAL;
754 if (ser->baud_base != uport->uartclk / 16)
755 ret = -EINVAL;
756 return ret;
757 }
758
759
760 static const struct uart_ops sbd_ops = {
761 .tx_empty = sbd_tx_empty,
762 .set_mctrl = sbd_set_mctrl,
763 .get_mctrl = sbd_get_mctrl,
764 .stop_tx = sbd_stop_tx,
765 .start_tx = sbd_start_tx,
766 .stop_rx = sbd_stop_rx,
767 .enable_ms = sbd_enable_ms,
768 .break_ctl = sbd_break_ctl,
769 .startup = sbd_startup,
770 .shutdown = sbd_shutdown,
771 .set_termios = sbd_set_termios,
772 .type = sbd_type,
773 .release_port = sbd_release_port,
774 .request_port = sbd_request_port,
775 .config_port = sbd_config_port,
776 .verify_port = sbd_verify_port,
777 };
778
779 /* Initialize SB1250 DUART port structures. */
780 static void __init sbd_probe_duarts(void)
781 {
782 static int probed;
783 int chip, side;
784 int max_lines, line;
785
786 if (probed)
787 return;
788
789 /* Set the number of available units based on the SOC type. */
790 switch (soc_type) {
791 case K_SYS_SOC_TYPE_BCM1x55:
792 case K_SYS_SOC_TYPE_BCM1x80:
793 max_lines = 4;
794 break;
795 default:
796 /* Assume at least two serial ports at the normal address. */
797 max_lines = 2;
798 break;
799 }
800
801 probed = 1;
802
803 for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines;
804 chip++) {
805 sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line);
806
807 for (side = 0; side < DUART_MAX_SIDE && line < max_lines;
808 side++, line++) {
809 struct sbd_port *sport = &sbd_duarts[chip].sport[side];
810 struct uart_port *uport = &sport->port;
811
812 sport->duart = &sbd_duarts[chip];
813
814 uport->irq = SBD_INT(line);
815 uport->uartclk = 100000000 / 20 * 16;
816 uport->fifosize = 16;
817 uport->iotype = UPIO_MEM;
818 uport->flags = UPF_BOOT_AUTOCONF;
819 uport->ops = &sbd_ops;
820 uport->line = line;
821 uport->mapbase = SBD_CHANREGS(line);
822 }
823 }
824 }
825
826
827 #ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE
828 /*
829 * Serial console stuff. Very basic, polling driver for doing serial
830 * console output. The console_lock is held by the caller, so we
831 * shouldn't be interrupted for more console activity.
832 */
833 static void sbd_console_putchar(struct uart_port *uport, int ch)
834 {
835 struct sbd_port *sport = to_sport(uport);
836
837 sbd_transmit_drain(sport);
838 write_sbdchn(sport, R_DUART_TX_HOLD, ch);
839 }
840
841 static void sbd_console_write(struct console *co, const char *s,
842 unsigned int count)
843 {
844 int chip = co->index / DUART_MAX_SIDE;
845 int side = co->index % DUART_MAX_SIDE;
846 struct sbd_port *sport = &sbd_duarts[chip].sport[side];
847 struct uart_port *uport = &sport->port;
848 unsigned long flags;
849 unsigned int mask;
850
851 /* Disable transmit interrupts and enable the transmitter. */
852 spin_lock_irqsave(&uport->lock, flags);
853 mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2));
854 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2),
855 mask & ~M_DUART_IMR_TX);
856 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN);
857 spin_unlock_irqrestore(&uport->lock, flags);
858
859 uart_console_write(&sport->port, s, count, sbd_console_putchar);
860
861 /* Restore transmit interrupts and the transmitter enable. */
862 spin_lock_irqsave(&uport->lock, flags);
863 sbd_line_drain(sport);
864 if (sport->tx_stopped)
865 write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS);
866 write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask);
867 spin_unlock_irqrestore(&uport->lock, flags);
868 }
869
870 static int __init sbd_console_setup(struct console *co, char *options)
871 {
872 int chip = co->index / DUART_MAX_SIDE;
873 int side = co->index % DUART_MAX_SIDE;
874 struct sbd_port *sport = &sbd_duarts[chip].sport[side];
875 struct uart_port *uport = &sport->port;
876 int baud = 115200;
877 int bits = 8;
878 int parity = 'n';
879 int flow = 'n';
880 int ret;
881
882 if (!sport->duart)
883 return -ENXIO;
884
885 ret = sbd_map_port(uport);
886 if (ret)
887 return ret;
888
889 sbd_init_port(sport);
890
891 if (options)
892 uart_parse_options(options, &baud, &parity, &bits, &flow);
893 return uart_set_options(uport, co, baud, parity, bits, flow);
894 }
895
896 static struct uart_driver sbd_reg;
897 static struct console sbd_console = {
898 .name = "duart",
899 .write = sbd_console_write,
900 .device = uart_console_device,
901 .setup = sbd_console_setup,
902 .flags = CON_PRINTBUFFER,
903 .index = -1,
904 .data = &sbd_reg
905 };
906
907 static int __init sbd_serial_console_init(void)
908 {
909 sbd_probe_duarts();
910 register_console(&sbd_console);
911
912 return 0;
913 }
914
915 console_initcall(sbd_serial_console_init);
916
917 #define SERIAL_SB1250_DUART_CONSOLE &sbd_console
918 #else
919 #define SERIAL_SB1250_DUART_CONSOLE NULL
920 #endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */
921
922
923 static struct uart_driver sbd_reg = {
924 .owner = THIS_MODULE,
925 .driver_name = "sb1250_duart",
926 .dev_name = "duart",
927 .major = TTY_MAJOR,
928 .minor = SB1250_DUART_MINOR_BASE,
929 .nr = DUART_MAX_CHIP * DUART_MAX_SIDE,
930 .cons = SERIAL_SB1250_DUART_CONSOLE,
931 };
932
933 /* Set up the driver and register it. */
934 static int __init sbd_init(void)
935 {
936 int i, ret;
937
938 sbd_probe_duarts();
939
940 ret = uart_register_driver(&sbd_reg);
941 if (ret)
942 return ret;
943
944 for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) {
945 struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE];
946 struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE];
947 struct uart_port *uport = &sport->port;
948
949 if (sport->duart)
950 uart_add_one_port(&sbd_reg, uport);
951 }
952
953 return 0;
954 }
955
956 /* Unload the driver. Unregister stuff, get ready to go away. */
957 static void __exit sbd_exit(void)
958 {
959 int i;
960
961 for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) {
962 struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE];
963 struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE];
964 struct uart_port *uport = &sport->port;
965
966 if (sport->duart)
967 uart_remove_one_port(&sbd_reg, uport);
968 }
969
970 uart_unregister_driver(&sbd_reg);
971 }
972
973 module_init(sbd_init);
974 module_exit(sbd_exit);
linux-next