?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / usb / gadget / fsl_udc_core.c
blobde24a4233c2563701f7cdec2f1b125e8002e7fdb
1 /*
2 * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc.
3 * All rights reserved.
4 *
5 * Author: Li Yang <leoli@freescale.com>
6 * Jiang Bo <tanya.jiang@freescale.com>
7 *
8 * Description:
9 * Freescale high-speed USB SOC DR module device controller driver.
10 * This can be found on MPC8349E/MPC8313E/MPC5121E cpus.
11 * The driver is previously named as mpc_udc. Based on bare board
12 * code from Dave Liu and Shlomi Gridish.
13 *
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
18 */
19
20 #undef VERBOSE
21
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/ioport.h>
25 #include <linux/types.h>
26 #include <linux/errno.h>
27 #include <linux/slab.h>
28 #include <linux/init.h>
29 #include <linux/list.h>
30 #include <linux/interrupt.h>
31 #include <linux/proc_fs.h>
32 #include <linux/mm.h>
33 #include <linux/moduleparam.h>
34 #include <linux/device.h>
35 #include <linux/usb/ch9.h>
36 #include <linux/usb/gadget.h>
37 #include <linux/usb/otg.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/platform_device.h>
40 #include <linux/fsl_devices.h>
41 #include <linux/dmapool.h>
42 #include <linux/delay.h>
43
44 #include <asm/byteorder.h>
45 #include <asm/io.h>
46 #include <asm/system.h>
47 #include <asm/unaligned.h>
48 #include <asm/dma.h>
49
50 #include "fsl_usb2_udc.h"
51
52 #define DRIVER_DESC "Freescale High-Speed USB SOC Device Controller driver"
53 #define DRIVER_AUTHOR "Li Yang/Jiang Bo"
54 #define DRIVER_VERSION "Apr 20, 2007"
55
56 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
57
58 static const char driver_name[] = "fsl-usb2-udc";
59 static const char driver_desc[] = DRIVER_DESC;
60
61 static struct usb_dr_device *dr_regs;
62 #ifndef CONFIG_ARCH_MXC
63 static struct usb_sys_interface *usb_sys_regs;
64 #endif
65
66 /* it is initialized in probe() */
67 static struct fsl_udc *udc_controller = NULL;
68
69 static const struct usb_endpoint_descriptor
70 fsl_ep0_desc = {
71 .bLength = USB_DT_ENDPOINT_SIZE,
72 .bDescriptorType = USB_DT_ENDPOINT,
73 .bEndpointAddress = 0,
74 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
75 .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD,
76 };
77
78 static void fsl_ep_fifo_flush(struct usb_ep *_ep);
79
80 #ifdef CONFIG_PPC32
81 /*
82 * On some SoCs, the USB controller registers can be big or little endian,
83 * depending on the version of the chip. In order to be able to run the
84 * same kernel binary on 2 different versions of an SoC, the BE/LE decision
85 * must be made at run time. _fsl_readl and fsl_writel are pointers to the
86 * BE or LE readl() and writel() functions, and fsl_readl() and fsl_writel()
87 * call through those pointers. Platform code for SoCs that have BE USB
88 * registers should set pdata->big_endian_mmio flag.
89 *
90 * This also applies to controller-to-cpu accessors for the USB descriptors,
91 * since their endianness is also SoC dependant. Platform code for SoCs that
92 * have BE USB descriptors should set pdata->big_endian_desc flag.
93 */
94 static u32 _fsl_readl_be(const unsigned __iomem *p)
95 {
96 return in_be32(p);
97 }
98
99 static u32 _fsl_readl_le(const unsigned __iomem *p)
100 {
101 return in_le32(p);
102 }
103
104 static void _fsl_writel_be(u32 v, unsigned __iomem *p)
105 {
106 out_be32(p, v);
107 }
108
109 static void _fsl_writel_le(u32 v, unsigned __iomem *p)
110 {
111 out_le32(p, v);
112 }
113
114 static u32 (*_fsl_readl)(const unsigned __iomem *p);
115 static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
116
117 #define fsl_readl(p) (*_fsl_readl)((p))
118 #define fsl_writel(v, p) (*_fsl_writel)((v), (p))
119
120 static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata)
121 {
122 if (pdata->big_endian_mmio) {
123 _fsl_readl = _fsl_readl_be;
124 _fsl_writel = _fsl_writel_be;
125 } else {
126 _fsl_readl = _fsl_readl_le;
127 _fsl_writel = _fsl_writel_le;
128 }
129 }
130
131 static inline u32 cpu_to_hc32(const u32 x)
132 {
133 return udc_controller->pdata->big_endian_desc
134 ? (__force u32)cpu_to_be32(x)
135 : (__force u32)cpu_to_le32(x);
136 }
137
138 static inline u32 hc32_to_cpu(const u32 x)
139 {
140 return udc_controller->pdata->big_endian_desc
141 ? be32_to_cpu((__force __be32)x)
142 : le32_to_cpu((__force __le32)x);
143 }
144 #else /* !CONFIG_PPC32 */
145 static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {}
146
147 #define fsl_readl(addr) readl(addr)
148 #define fsl_writel(val32, addr) writel(val32, addr)
149 #define cpu_to_hc32(x) cpu_to_le32(x)
150 #define hc32_to_cpu(x) le32_to_cpu(x)
151 #endif /* CONFIG_PPC32 */
152
153 /********************************************************************
154 * Internal Used Function
155 ********************************************************************/
156 /*-----------------------------------------------------------------
157 * done() - retire a request; caller blocked irqs
158 * @status : request status to be set, only works when
159 * request is still in progress.
160 *--------------------------------------------------------------*/
161 static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
162 {
163 struct fsl_udc *udc = NULL;
164 unsigned char stopped = ep->stopped;
165 struct ep_td_struct *curr_td, *next_td;
166 int j;
167
168 udc = (struct fsl_udc *)ep->udc;
169 /* Removed the req from fsl_ep->queue */
170 list_del_init(&req->queue);
171
172 /* req.status should be set as -EINPROGRESS in ep_queue() */
173 if (req->req.status == -EINPROGRESS)
174 req->req.status = status;
175 else
176 status = req->req.status;
177
178 /* Free dtd for the request */
179 next_td = req->head;
180 for (j = 0; j < req->dtd_count; j++) {
181 curr_td = next_td;
182 if (j != req->dtd_count - 1) {
183 next_td = curr_td->next_td_virt;
184 }
185 dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma);
186 }
187
188 if (req->mapped) {
189 dma_unmap_single(ep->udc->gadget.dev.parent,
190 req->req.dma, req->req.length,
191 ep_is_in(ep)
192 ? DMA_TO_DEVICE
193 : DMA_FROM_DEVICE);
194 req->req.dma = DMA_ADDR_INVALID;
195 req->mapped = 0;
196 } else
197 dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
198 req->req.dma, req->req.length,
199 ep_is_in(ep)
200 ? DMA_TO_DEVICE
201 : DMA_FROM_DEVICE);
202
203 if (status && (status != -ESHUTDOWN))
204 VDBG("complete %s req %p stat %d len %u/%u",
205 ep->ep.name, &req->req, status,
206 req->req.actual, req->req.length);
207
208 ep->stopped = 1;
209
210 spin_unlock(&ep->udc->lock);
211 /* complete() is from gadget layer,
212 * eg fsg->bulk_in_complete() */
213 if (req->req.complete)
214 req->req.complete(&ep->ep, &req->req);
215
216 spin_lock(&ep->udc->lock);
217 ep->stopped = stopped;
218 }
219
220 /*-----------------------------------------------------------------
221 * nuke(): delete all requests related to this ep
222 * called with spinlock held
223 *--------------------------------------------------------------*/
224 static void nuke(struct fsl_ep *ep, int status)
225 {
226 ep->stopped = 1;
227
228 /* Flush fifo */
229 fsl_ep_fifo_flush(&ep->ep);
230
231 /* Whether this eq has request linked */
232 while (!list_empty(&ep->queue)) {
233 struct fsl_req *req = NULL;
234
235 req = list_entry(ep->queue.next, struct fsl_req, queue);
236 done(ep, req, status);
237 }
238 }
239
240 /*------------------------------------------------------------------
241 Internal Hardware related function
242 ------------------------------------------------------------------*/
243
244 static int dr_controller_setup(struct fsl_udc *udc)
245 {
246 unsigned int tmp, portctrl, ep_num;
247 unsigned int max_no_of_ep;
248 #ifndef CONFIG_ARCH_MXC
249 unsigned int ctrl;
250 #endif
251 unsigned long timeout;
252 #define FSL_UDC_RESET_TIMEOUT 1000
253
254 /* Config PHY interface */
255 portctrl = fsl_readl(&dr_regs->portsc1);
256 portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
257 switch (udc->phy_mode) {
258 case FSL_USB2_PHY_ULPI:
259 portctrl |= PORTSCX_PTS_ULPI;
260 break;
261 case FSL_USB2_PHY_UTMI_WIDE:
262 portctrl |= PORTSCX_PTW_16BIT;
263 /* fall through */
264 case FSL_USB2_PHY_UTMI:
265 portctrl |= PORTSCX_PTS_UTMI;
266 break;
267 case FSL_USB2_PHY_SERIAL:
268 portctrl |= PORTSCX_PTS_FSLS;
269 break;
270 default:
271 return -EINVAL;
272 }
273 fsl_writel(portctrl, &dr_regs->portsc1);
274
275 /* Stop and reset the usb controller */
276 tmp = fsl_readl(&dr_regs->usbcmd);
277 tmp &= ~USB_CMD_RUN_STOP;
278 fsl_writel(tmp, &dr_regs->usbcmd);
279
280 tmp = fsl_readl(&dr_regs->usbcmd);
281 tmp |= USB_CMD_CTRL_RESET;
282 fsl_writel(tmp, &dr_regs->usbcmd);
283
284 /* Wait for reset to complete */
285 timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
286 while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
287 if (time_after(jiffies, timeout)) {
288 ERR("udc reset timeout!\n");
289 return -ETIMEDOUT;
290 }
291 cpu_relax();
292 }
293
294 /* Set the controller as device mode */
295 tmp = fsl_readl(&dr_regs->usbmode);
296 tmp &= ~USB_MODE_CTRL_MODE_MASK; /* clear mode bits */
297 tmp |= USB_MODE_CTRL_MODE_DEVICE;
298 /* Disable Setup Lockout */
299 tmp |= USB_MODE_SETUP_LOCK_OFF;
300 if (udc->pdata->es)
301 tmp |= USB_MODE_ES;
302 fsl_writel(tmp, &dr_regs->usbmode);
303
304 /* Clear the setup status */
305 fsl_writel(0, &dr_regs->usbsts);
306
307 tmp = udc->ep_qh_dma;
308 tmp &= USB_EP_LIST_ADDRESS_MASK;
309 fsl_writel(tmp, &dr_regs->endpointlistaddr);
310
311 VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
312 udc->ep_qh, (int)tmp,
313 fsl_readl(&dr_regs->endpointlistaddr));
314
315 max_no_of_ep = (0x0000001F & fsl_readl(&dr_regs->dccparams));
316 for (ep_num = 1; ep_num < max_no_of_ep; ep_num++) {
317 tmp = fsl_readl(&dr_regs->endptctrl[ep_num]);
318 tmp &= ~(EPCTRL_TX_TYPE | EPCTRL_RX_TYPE);
319 tmp |= (EPCTRL_EP_TYPE_BULK << EPCTRL_TX_EP_TYPE_SHIFT)
320 | (EPCTRL_EP_TYPE_BULK << EPCTRL_RX_EP_TYPE_SHIFT);
321 fsl_writel(tmp, &dr_regs->endptctrl[ep_num]);
322 }
323 /* Config control enable i/o output, cpu endian register */
324 #ifndef CONFIG_ARCH_MXC
325 if (udc->pdata->have_sysif_regs) {
326 ctrl = __raw_readl(&usb_sys_regs->control);
327 ctrl |= USB_CTRL_IOENB;
328 __raw_writel(ctrl, &usb_sys_regs->control);
329 }
330 #endif
331
332 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
333 /* Turn on cache snooping hardware, since some PowerPC platforms
334 * wholly rely on hardware to deal with cache coherent. */
335
336 if (udc->pdata->have_sysif_regs) {
337 /* Setup Snooping for all the 4GB space */
338 tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */
339 __raw_writel(tmp, &usb_sys_regs->snoop1);
340 tmp |= 0x80000000; /* starts from 0x8000000, size 2G */
341 __raw_writel(tmp, &usb_sys_regs->snoop2);
342 }
343 #endif
344
345 return 0;
346 }
347
348 /* Enable DR irq and set controller to run state */
349 static void dr_controller_run(struct fsl_udc *udc)
350 {
351 u32 temp;
352
353 /* Enable DR irq reg */
354 temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
355 | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
356 | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN;
357
358 fsl_writel(temp, &dr_regs->usbintr);
359
360 /* Clear stopped bit */
361 udc->stopped = 0;
362
363 /* Set the controller as device mode */
364 temp = fsl_readl(&dr_regs->usbmode);
365 temp |= USB_MODE_CTRL_MODE_DEVICE;
366 fsl_writel(temp, &dr_regs->usbmode);
367
368 /* Set controller to Run */
369 temp = fsl_readl(&dr_regs->usbcmd);
370 temp |= USB_CMD_RUN_STOP;
371 fsl_writel(temp, &dr_regs->usbcmd);
372 }
373
374 static void dr_controller_stop(struct fsl_udc *udc)
375 {
376 unsigned int tmp;
377
378 pr_debug("%s\n", __func__);
379
380 /* if we're in OTG mode, and the Host is currently using the port,
381 * stop now and don't rip the controller out from under the
382 * ehci driver
383 */
384 if (udc->gadget.is_otg) {
385 if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_STS_USB_ID)) {
386 pr_debug("udc: Leaving early\n");
387 return;
388 }
389 }
390
391 /* disable all INTR */
392 fsl_writel(0, &dr_regs->usbintr);
393
394 /* Set stopped bit for isr */
395 udc->stopped = 1;
396
397 /* disable IO output */
398 /* usb_sys_regs->control = 0; */
399
400 /* set controller to Stop */
401 tmp = fsl_readl(&dr_regs->usbcmd);
402 tmp &= ~USB_CMD_RUN_STOP;
403 fsl_writel(tmp, &dr_regs->usbcmd);
404 }
405
406 static void dr_ep_setup(unsigned char ep_num, unsigned char dir,
407 unsigned char ep_type)
408 {
409 unsigned int tmp_epctrl = 0;
410
411 tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
412 if (dir) {
413 if (ep_num)
414 tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
415 tmp_epctrl |= EPCTRL_TX_ENABLE;
416 tmp_epctrl &= ~EPCTRL_TX_TYPE;
417 tmp_epctrl |= ((unsigned int)(ep_type)
418 << EPCTRL_TX_EP_TYPE_SHIFT);
419 } else {
420 if (ep_num)
421 tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
422 tmp_epctrl |= EPCTRL_RX_ENABLE;
423 tmp_epctrl &= ~EPCTRL_RX_TYPE;
424 tmp_epctrl |= ((unsigned int)(ep_type)
425 << EPCTRL_RX_EP_TYPE_SHIFT);
426 }
427
428 fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
429 }
430
431 static void
432 dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value)
433 {
434 u32 tmp_epctrl = 0;
435
436 tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
437
438 if (value) {
439 /* set the stall bit */
440 if (dir)
441 tmp_epctrl |= EPCTRL_TX_EP_STALL;
442 else
443 tmp_epctrl |= EPCTRL_RX_EP_STALL;
444 } else {
445 /* clear the stall bit and reset data toggle */
446 if (dir) {
447 tmp_epctrl &= ~EPCTRL_TX_EP_STALL;
448 tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
449 } else {
450 tmp_epctrl &= ~EPCTRL_RX_EP_STALL;
451 tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
452 }
453 }
454 fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
455 }
456
457 /* Get stall status of a specific ep
458 Return: 0: not stalled; 1:stalled */
459 static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
460 {
461 u32 epctrl;
462
463 epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
464 if (dir)
465 return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0;
466 else
467 return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0;
468 }
469
470 /********************************************************************
471 Internal Structure Build up functions
472 ********************************************************************/
473
474 /*------------------------------------------------------------------
475 * struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
476 * @zlt: Zero Length Termination Select (1: disable; 0: enable)
477 * @mult: Mult field
478 ------------------------------------------------------------------*/
479 static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
480 unsigned char dir, unsigned char ep_type,
481 unsigned int max_pkt_len,
482 unsigned int zlt, unsigned char mult)
483 {
484 struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
485 unsigned int tmp = 0;
486
487 /* set the Endpoint Capabilites in QH */
488 switch (ep_type) {
489 case USB_ENDPOINT_XFER_CONTROL:
490 /* Interrupt On Setup (IOS). for control ep */
491 tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
492 | EP_QUEUE_HEAD_IOS;
493 break;
494 case USB_ENDPOINT_XFER_ISOC:
495 tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
496 | (mult << EP_QUEUE_HEAD_MULT_POS);
497 break;
498 case USB_ENDPOINT_XFER_BULK:
499 case USB_ENDPOINT_XFER_INT:
500 tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
501 break;
502 default:
503 VDBG("error ep type is %d", ep_type);
504 return;
505 }
506 if (zlt)
507 tmp |= EP_QUEUE_HEAD_ZLT_SEL;
508
509 p_QH->max_pkt_length = cpu_to_hc32(tmp);
510 p_QH->next_dtd_ptr = 1;
511 p_QH->size_ioc_int_sts = 0;
512 }
513
514 /* Setup qh structure and ep register for ep0. */
515 static void ep0_setup(struct fsl_udc *udc)
516 {
517 /* the intialization of an ep includes: fields in QH, Regs,
518 * fsl_ep struct */
519 struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
520 USB_MAX_CTRL_PAYLOAD, 0, 0);
521 struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL,
522 USB_MAX_CTRL_PAYLOAD, 0, 0);
523 dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL);
524 dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL);
525
526 return;
527
528 }
529
530 /***********************************************************************
531 Endpoint Management Functions
532 ***********************************************************************/
533
534 /*-------------------------------------------------------------------------
535 * when configurations are set, or when interface settings change
536 * for example the do_set_interface() in gadget layer,
537 * the driver will enable or disable the relevant endpoints
538 * ep0 doesn't use this routine. It is always enabled.
539 -------------------------------------------------------------------------*/
540 static int fsl_ep_enable(struct usb_ep *_ep,
541 const struct usb_endpoint_descriptor *desc)
542 {
543 struct fsl_udc *udc = NULL;
544 struct fsl_ep *ep = NULL;
545 unsigned short max = 0;
546 unsigned char mult = 0, zlt;
547 int retval = -EINVAL;
548 unsigned long flags = 0;
549
550 ep = container_of(_ep, struct fsl_ep, ep);
551
552 /* catch various bogus parameters */
553 if (!_ep || !desc || ep->desc
554 || (desc->bDescriptorType != USB_DT_ENDPOINT))
555 return -EINVAL;
556
557 udc = ep->udc;
558
559 if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
560 return -ESHUTDOWN;
561
562 max = le16_to_cpu(desc->wMaxPacketSize);
563
564 /* Disable automatic zlp generation. Driver is responsible to indicate
565 * explicitly through req->req.zero. This is needed to enable multi-td
566 * request. */
567 zlt = 1;
568
569 /* Assume the max packet size from gadget is always correct */
570 switch (desc->bmAttributes & 0x03) {
571 case USB_ENDPOINT_XFER_CONTROL:
572 case USB_ENDPOINT_XFER_BULK:
573 case USB_ENDPOINT_XFER_INT:
574 /* mult = 0. Execute N Transactions as demonstrated by
575 * the USB variable length packet protocol where N is
576 * computed using the Maximum Packet Length (dQH) and
577 * the Total Bytes field (dTD) */
578 mult = 0;
579 break;
580 case USB_ENDPOINT_XFER_ISOC:
581 /* Calculate transactions needed for high bandwidth iso */
582 mult = (unsigned char)(1 + ((max >> 11) & 0x03));
583 max = max & 0x7ff; /* bit 0~10 */
584 /* 3 transactions at most */
585 if (mult > 3)
586 goto en_done;
587 break;
588 default:
589 goto en_done;
590 }
591
592 spin_lock_irqsave(&udc->lock, flags);
593 ep->ep.maxpacket = max;
594 ep->desc = desc;
595 ep->stopped = 0;
596
597 /* Controller related setup */
598 /* Init EPx Queue Head (Ep Capabilites field in QH
599 * according to max, zlt, mult) */
600 struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
601 (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
602 ? USB_SEND : USB_RECV),
603 (unsigned char) (desc->bmAttributes
604 & USB_ENDPOINT_XFERTYPE_MASK),
605 max, zlt, mult);
606
607 /* Init endpoint ctrl register */
608 dr_ep_setup((unsigned char) ep_index(ep),
609 (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
610 ? USB_SEND : USB_RECV),
611 (unsigned char) (desc->bmAttributes
612 & USB_ENDPOINT_XFERTYPE_MASK));
613
614 spin_unlock_irqrestore(&udc->lock, flags);
615 retval = 0;
616
617 VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
618 ep->desc->bEndpointAddress & 0x0f,
619 (desc->bEndpointAddress & USB_DIR_IN)
620 ? "in" : "out", max);
621 en_done:
622 return retval;
623 }
624
625 /*---------------------------------------------------------------------
626 * @ep : the ep being unconfigured. May not be ep0
627 * Any pending and uncomplete req will complete with status (-ESHUTDOWN)
628 *---------------------------------------------------------------------*/
629 static int fsl_ep_disable(struct usb_ep *_ep)
630 {
631 struct fsl_udc *udc = NULL;
632 struct fsl_ep *ep = NULL;
633 unsigned long flags = 0;
634 u32 epctrl;
635 int ep_num;
636
637 ep = container_of(_ep, struct fsl_ep, ep);
638 if (!_ep || !ep->desc) {
639 VDBG("%s not enabled", _ep ? ep->ep.name : NULL);
640 return -EINVAL;
641 }
642
643 /* disable ep on controller */
644 ep_num = ep_index(ep);
645 epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
646 if (ep_is_in(ep)) {
647 epctrl &= ~(EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE);
648 epctrl |= EPCTRL_EP_TYPE_BULK << EPCTRL_TX_EP_TYPE_SHIFT;
649 } else {
650 epctrl &= ~(EPCTRL_RX_ENABLE | EPCTRL_TX_TYPE);
651 epctrl |= EPCTRL_EP_TYPE_BULK << EPCTRL_RX_EP_TYPE_SHIFT;
652 }
653 fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
654
655 udc = (struct fsl_udc *)ep->udc;
656 spin_lock_irqsave(&udc->lock, flags);
657
658 /* nuke all pending requests (does flush) */
659 nuke(ep, -ESHUTDOWN);
660
661 ep->desc = NULL;
662 ep->stopped = 1;
663 spin_unlock_irqrestore(&udc->lock, flags);
664
665 VDBG("disabled %s OK", _ep->name);
666 return 0;
667 }
668
669 /*---------------------------------------------------------------------
670 * allocate a request object used by this endpoint
671 * the main operation is to insert the req->queue to the eq->queue
672 * Returns the request, or null if one could not be allocated
673 *---------------------------------------------------------------------*/
674 static struct usb_request *
675 fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
676 {
677 struct fsl_req *req = NULL;
678
679 req = kzalloc(sizeof *req, gfp_flags);
680 if (!req)
681 return NULL;
682
683 req->req.dma = DMA_ADDR_INVALID;
684 INIT_LIST_HEAD(&req->queue);
685
686 return &req->req;
687 }
688
689 static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
690 {
691 struct fsl_req *req = NULL;
692
693 req = container_of(_req, struct fsl_req, req);
694
695 if (_req)
696 kfree(req);
697 }
698
699 /*-------------------------------------------------------------------------*/
700 static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
701 {
702 int i = ep_index(ep) * 2 + ep_is_in(ep);
703 u32 temp, bitmask, tmp_stat;
704 struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
705
706 /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
707 VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
708
709 bitmask = ep_is_in(ep)
710 ? (1 << (ep_index(ep) + 16))
711 : (1 << (ep_index(ep)));
712
713 /* check if the pipe is empty */
714 if (!(list_empty(&ep->queue))) {
715 /* Add td to the end */
716 struct fsl_req *lastreq;
717 lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
718 lastreq->tail->next_td_ptr =
719 cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
720 /* Read prime bit, if 1 goto done */
721 if (fsl_readl(&dr_regs->endpointprime) & bitmask)
722 goto out;
723
724 do {
725 /* Set ATDTW bit in USBCMD */
726 temp = fsl_readl(&dr_regs->usbcmd);
727 fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd);
728
729 /* Read correct status bit */
730 tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask;
731
732 } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW));
733
734 /* Write ATDTW bit to 0 */
735 temp = fsl_readl(&dr_regs->usbcmd);
736 fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
737
738 if (tmp_stat)
739 goto out;
740 }
741
742 /* Write dQH next pointer and terminate bit to 0 */
743 temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
744 dQH->next_dtd_ptr = cpu_to_hc32(temp);
745
746 /* Clear active and halt bit */
747 temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
748 | EP_QUEUE_HEAD_STATUS_HALT));
749 dQH->size_ioc_int_sts &= temp;
750
751 /* Ensure that updates to the QH will occur before priming. */
752 wmb();
753
754 /* Prime endpoint by writing 1 to ENDPTPRIME */
755 temp = ep_is_in(ep)
756 ? (1 << (ep_index(ep) + 16))
757 : (1 << (ep_index(ep)));
758 fsl_writel(temp, &dr_regs->endpointprime);
759 out:
760 return;
761 }
762
763 /* Fill in the dTD structure
764 * @req: request that the transfer belongs to
765 * @length: return actually data length of the dTD
766 * @dma: return dma address of the dTD
767 * @is_last: return flag if it is the last dTD of the request
768 * return: pointer to the built dTD */
769 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
770 dma_addr_t *dma, int *is_last)
771 {
772 u32 swap_temp;
773 struct ep_td_struct *dtd;
774
775 /* how big will this transfer be? */
776 *length = min(req->req.length - req->req.actual,
777 (unsigned)EP_MAX_LENGTH_TRANSFER);
778
779 dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
780 if (dtd == NULL)
781 return dtd;
782
783 dtd->td_dma = *dma;
784 /* Clear reserved field */
785 swap_temp = hc32_to_cpu(dtd->size_ioc_sts);
786 swap_temp &= ~DTD_RESERVED_FIELDS;
787 dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
788
789 /* Init all of buffer page pointers */
790 swap_temp = (u32) (req->req.dma + req->req.actual);
791 dtd->buff_ptr0 = cpu_to_hc32(swap_temp);
792 dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000);
793 dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000);
794 dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000);
795 dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000);
796
797 req->req.actual += *length;
798
799 /* zlp is needed if req->req.zero is set */
800 if (req->req.zero) {
801 if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
802 *is_last = 1;
803 else
804 *is_last = 0;
805 } else if (req->req.length == req->req.actual)
806 *is_last = 1;
807 else
808 *is_last = 0;
809
810 if ((*is_last) == 0)
811 VDBG("multi-dtd request!");
812 /* Fill in the transfer size; set active bit */
813 swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
814
815 /* Enable interrupt for the last dtd of a request */
816 if (*is_last && !req->req.no_interrupt)
817 swap_temp |= DTD_IOC;
818
819 dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
820
821 mb();
822
823 VDBG("length = %d address= 0x%x", *length, (int)*dma);
824
825 return dtd;
826 }
827
828 /* Generate dtd chain for a request */
829 static int fsl_req_to_dtd(struct fsl_req *req)
830 {
831 unsigned count;
832 int is_last;
833 int is_first =1;
834 struct ep_td_struct *last_dtd = NULL, *dtd;
835 dma_addr_t dma;
836
837 do {
838 dtd = fsl_build_dtd(req, &count, &dma, &is_last);
839 if (dtd == NULL)
840 return -ENOMEM;
841
842 if (is_first) {
843 is_first = 0;
844 req->head = dtd;
845 } else {
846 last_dtd->next_td_ptr = cpu_to_hc32(dma);
847 last_dtd->next_td_virt = dtd;
848 }
849 last_dtd = dtd;
850
851 req->dtd_count++;
852 } while (!is_last);
853
854 dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE);
855
856 req->tail = dtd;
857
858 return 0;
859 }
860
861 /* queues (submits) an I/O request to an endpoint */
862 static int
863 fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
864 {
865 struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
866 struct fsl_req *req = container_of(_req, struct fsl_req, req);
867 struct fsl_udc *udc;
868 unsigned long flags;
869
870 /* catch various bogus parameters */
871 if (!_req || !req->req.complete || !req->req.buf
872 || !list_empty(&req->queue)) {
873 VDBG("%s, bad params", __func__);
874 return -EINVAL;
875 }
876 if (unlikely(!_ep || !ep->desc)) {
877 VDBG("%s, bad ep", __func__);
878 return -EINVAL;
879 }
880 if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
881 if (req->req.length > ep->ep.maxpacket)
882 return -EMSGSIZE;
883 }
884
885 udc = ep->udc;
886 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
887 return -ESHUTDOWN;
888
889 req->ep = ep;
890
891 /* map virtual address to hardware */
892 if (req->req.dma == DMA_ADDR_INVALID) {
893 req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
894 req->req.buf,
895 req->req.length, ep_is_in(ep)
896 ? DMA_TO_DEVICE
897 : DMA_FROM_DEVICE);
898 req->mapped = 1;
899 } else {
900 dma_sync_single_for_device(ep->udc->gadget.dev.parent,
901 req->req.dma, req->req.length,
902 ep_is_in(ep)
903 ? DMA_TO_DEVICE
904 : DMA_FROM_DEVICE);
905 req->mapped = 0;
906 }
907
908 req->req.status = -EINPROGRESS;
909 req->req.actual = 0;
910 req->dtd_count = 0;
911
912 spin_lock_irqsave(&udc->lock, flags);
913
914 /* build dtds and push them to device queue */
915 if (!fsl_req_to_dtd(req)) {
916 fsl_queue_td(ep, req);
917 } else {
918 spin_unlock_irqrestore(&udc->lock, flags);
919 return -ENOMEM;
920 }
921
922 /* Update ep0 state */
923 if ((ep_index(ep) == 0))
924 udc->ep0_state = DATA_STATE_XMIT;
925
926 /* irq handler advances the queue */
927 if (req != NULL)
928 list_add_tail(&req->queue, &ep->queue);
929 spin_unlock_irqrestore(&udc->lock, flags);
930
931 return 0;
932 }
933
934 /* dequeues (cancels, unlinks) an I/O request from an endpoint */
935 static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
936 {
937 struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
938 struct fsl_req *req;
939 unsigned long flags;
940 int ep_num, stopped, ret = 0;
941 u32 epctrl;
942
943 if (!_ep || !_req)
944 return -EINVAL;
945
946 spin_lock_irqsave(&ep->udc->lock, flags);
947 stopped = ep->stopped;
948
949 /* Stop the ep before we deal with the queue */
950 ep->stopped = 1;
951 ep_num = ep_index(ep);
952 epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
953 if (ep_is_in(ep))
954 epctrl &= ~EPCTRL_TX_ENABLE;
955 else
956 epctrl &= ~EPCTRL_RX_ENABLE;
957 fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
958
959 /* make sure it's actually queued on this endpoint */
960 list_for_each_entry(req, &ep->queue, queue) {
961 if (&req->req == _req)
962 break;
963 }
964 if (&req->req != _req) {
965 ret = -EINVAL;
966 goto out;
967 }
968
969 /* The request is in progress, or completed but not dequeued */
970 if (ep->queue.next == &req->queue) {
971 _req->status = -ECONNRESET;
972 fsl_ep_fifo_flush(_ep); /* flush current transfer */
973
974 /* The request isn't the last request in this ep queue */
975 if (req->queue.next != &ep->queue) {
976 struct ep_queue_head *qh;
977 struct fsl_req *next_req;
978
979 qh = ep->qh;
980 next_req = list_entry(req->queue.next, struct fsl_req,
981 queue);
982
983 /* Point the QH to the first TD of next request */
984 fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
985 }
986
987 /* The request hasn't been processed, patch up the TD chain */
988 } else {
989 struct fsl_req *prev_req;
990
991 prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
992 fsl_writel(fsl_readl(&req->tail->next_td_ptr),
993 &prev_req->tail->next_td_ptr);
994
995 }
996
997 done(ep, req, -ECONNRESET);
998
999 /* Enable EP */
1000 out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
1001 if (ep_is_in(ep))
1002 epctrl |= EPCTRL_TX_ENABLE;
1003 else
1004 epctrl |= EPCTRL_RX_ENABLE;
1005 fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
1006 ep->stopped = stopped;
1007
1008 spin_unlock_irqrestore(&ep->udc->lock, flags);
1009 return ret;
1010 }
1011
1012 /*-------------------------------------------------------------------------*/
1013
1014 /*-----------------------------------------------------------------
1015 * modify the endpoint halt feature
1016 * @ep: the non-isochronous endpoint being stalled
1017 * @value: 1--set halt 0--clear halt
1018 * Returns zero, or a negative error code.
1019 *----------------------------------------------------------------*/
1020 static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
1021 {
1022 struct fsl_ep *ep = NULL;
1023 unsigned long flags = 0;
1024 int status = -EOPNOTSUPP; /* operation not supported */
1025 unsigned char ep_dir = 0, ep_num = 0;
1026 struct fsl_udc *udc = NULL;
1027
1028 ep = container_of(_ep, struct fsl_ep, ep);
1029 udc = ep->udc;
1030 if (!_ep || !ep->desc) {
1031 status = -EINVAL;
1032 goto out;
1033 }
1034
1035 if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
1036 status = -EOPNOTSUPP;
1037 goto out;
1038 }
1039
1040 /* Attempt to halt IN ep will fail if any transfer requests
1041 * are still queue */
1042 if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
1043 status = -EAGAIN;
1044 goto out;
1045 }
1046
1047 status = 0;
1048 ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
1049 ep_num = (unsigned char)(ep_index(ep));
1050 spin_lock_irqsave(&ep->udc->lock, flags);
1051 dr_ep_change_stall(ep_num, ep_dir, value);
1052 spin_unlock_irqrestore(&ep->udc->lock, flags);
1053
1054 if (ep_index(ep) == 0) {
1055 udc->ep0_state = WAIT_FOR_SETUP;
1056 udc->ep0_dir = 0;
1057 }
1058 out:
1059 VDBG(" %s %s halt stat %d", ep->ep.name,
1060 value ? "set" : "clear", status);
1061
1062 return status;
1063 }
1064
1065 static int fsl_ep_fifo_status(struct usb_ep *_ep)
1066 {
1067 struct fsl_ep *ep;
1068 struct fsl_udc *udc;
1069 int size = 0;
1070 u32 bitmask;
1071 struct ep_queue_head *d_qh;
1072
1073 ep = container_of(_ep, struct fsl_ep, ep);
1074 if (!_ep || (!ep->desc && ep_index(ep) != 0))
1075 return -ENODEV;
1076
1077 udc = (struct fsl_udc *)ep->udc;
1078
1079 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
1080 return -ESHUTDOWN;
1081
1082 d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)];
1083
1084 bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) :
1085 (1 << (ep_index(ep)));
1086
1087 if (fsl_readl(&dr_regs->endptstatus) & bitmask)
1088 size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE)
1089 >> DTD_LENGTH_BIT_POS;
1090
1091 pr_debug("%s %u\n", __func__, size);
1092 return size;
1093 }
1094
1095 static void fsl_ep_fifo_flush(struct usb_ep *_ep)
1096 {
1097 struct fsl_ep *ep;
1098 int ep_num, ep_dir;
1099 u32 bits;
1100 unsigned long timeout;
1101 #define FSL_UDC_FLUSH_TIMEOUT 1000
1102
1103 if (!_ep) {
1104 return;
1105 } else {
1106 ep = container_of(_ep, struct fsl_ep, ep);
1107 if (!ep->desc)
1108 return;
1109 }
1110 ep_num = ep_index(ep);
1111 ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
1112
1113 if (ep_num == 0)
1114 bits = (1 << 16) | 1;
1115 else if (ep_dir == USB_SEND)
1116 bits = 1 << (16 + ep_num);
1117 else
1118 bits = 1 << ep_num;
1119
1120 timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT;
1121 do {
1122 fsl_writel(bits, &dr_regs->endptflush);
1123
1124 /* Wait until flush complete */
1125 while (fsl_readl(&dr_regs->endptflush)) {
1126 if (time_after(jiffies, timeout)) {
1127 ERR("ep flush timeout\n");
1128 return;
1129 }
1130 cpu_relax();
1131 }
1132 /* See if we need to flush again */
1133 } while (fsl_readl(&dr_regs->endptstatus) & bits);
1134 }
1135
1136 static struct usb_ep_ops fsl_ep_ops = {
1137 .enable = fsl_ep_enable,
1138 .disable = fsl_ep_disable,
1139
1140 .alloc_request = fsl_alloc_request,
1141 .free_request = fsl_free_request,
1142
1143 .queue = fsl_ep_queue,
1144 .dequeue = fsl_ep_dequeue,
1145
1146 .set_halt = fsl_ep_set_halt,
1147 .fifo_status = fsl_ep_fifo_status,
1148 .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */
1149 };
1150
1151 /*-------------------------------------------------------------------------
1152 Gadget Driver Layer Operations
1153 -------------------------------------------------------------------------*/
1154
1155 /*----------------------------------------------------------------------
1156 * Get the current frame number (from DR frame_index Reg )
1157 *----------------------------------------------------------------------*/
1158 static int fsl_get_frame(struct usb_gadget *gadget)
1159 {
1160 return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS);
1161 }
1162
1163 /*-----------------------------------------------------------------------
1164 * Tries to wake up the host connected to this gadget
1165 -----------------------------------------------------------------------*/
1166 static int fsl_wakeup(struct usb_gadget *gadget)
1167 {
1168 struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget);
1169 u32 portsc;
1170
1171 /* Remote wakeup feature not enabled by host */
1172 if (!udc->remote_wakeup)
1173 return -ENOTSUPP;
1174
1175 portsc = fsl_readl(&dr_regs->portsc1);
1176 /* not suspended? */
1177 if (!(portsc & PORTSCX_PORT_SUSPEND))
1178 return 0;
1179 /* trigger force resume */
1180 portsc |= PORTSCX_PORT_FORCE_RESUME;
1181 fsl_writel(portsc, &dr_regs->portsc1);
1182 return 0;
1183 }
1184
1185 static int can_pullup(struct fsl_udc *udc)
1186 {
1187 return udc->driver && udc->softconnect && udc->vbus_active;
1188 }
1189
1190 /* Notify controller that VBUS is powered, Called by whatever
1191 detects VBUS sessions */
1192 static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
1193 {
1194 struct fsl_udc *udc;
1195 unsigned long flags;
1196
1197 udc = container_of(gadget, struct fsl_udc, gadget);
1198 spin_lock_irqsave(&udc->lock, flags);
1199 VDBG("VBUS %s", is_active ? "on" : "off");
1200 udc->vbus_active = (is_active != 0);
1201 if (can_pullup(udc))
1202 fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
1203 &dr_regs->usbcmd);
1204 else
1205 fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
1206 &dr_regs->usbcmd);
1207 spin_unlock_irqrestore(&udc->lock, flags);
1208 return 0;
1209 }
1210
1211 /* constrain controller's VBUS power usage
1212 * This call is used by gadget drivers during SET_CONFIGURATION calls,
1213 * reporting how much power the device may consume. For example, this
1214 * could affect how quickly batteries are recharged.
1215 *
1216 * Returns zero on success, else negative errno.
1217 */
1218 static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
1219 {
1220 struct fsl_udc *udc;
1221
1222 udc = container_of(gadget, struct fsl_udc, gadget);
1223 if (udc->transceiver)
1224 return otg_set_power(udc->transceiver, mA);
1225 return -ENOTSUPP;
1226 }
1227
1228 /* Change Data+ pullup status
1229 * this func is used by usb_gadget_connect/disconnet
1230 */
1231 static int fsl_pullup(struct usb_gadget *gadget, int is_on)
1232 {
1233 struct fsl_udc *udc;
1234
1235 udc = container_of(gadget, struct fsl_udc, gadget);
1236 udc->softconnect = (is_on != 0);
1237 if (can_pullup(udc))
1238 fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
1239 &dr_regs->usbcmd);
1240 else
1241 fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
1242 &dr_regs->usbcmd);
1243
1244 return 0;
1245 }
1246
1247 static int fsl_start(struct usb_gadget_driver *driver,
1248 int (*bind)(struct usb_gadget *));
1249 static int fsl_stop(struct usb_gadget_driver *driver);
1250 /* defined in gadget.h */
1251 static struct usb_gadget_ops fsl_gadget_ops = {
1252 .get_frame = fsl_get_frame,
1253 .wakeup = fsl_wakeup,
1254 /* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */
1255 .vbus_session = fsl_vbus_session,
1256 .vbus_draw = fsl_vbus_draw,
1257 .pullup = fsl_pullup,
1258 .start = fsl_start,
1259 .stop = fsl_stop,
1260 };
1261
1262 /* Set protocol stall on ep0, protocol stall will automatically be cleared
1263 on new transaction */
1264 static void ep0stall(struct fsl_udc *udc)
1265 {
1266 u32 tmp;
1267
1268 /* must set tx and rx to stall at the same time */
1269 tmp = fsl_readl(&dr_regs->endptctrl[0]);
1270 tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL;
1271 fsl_writel(tmp, &dr_regs->endptctrl[0]);
1272 udc->ep0_state = WAIT_FOR_SETUP;
1273 udc->ep0_dir = 0;
1274 }
1275
1276 /* Prime a status phase for ep0 */
1277 static int ep0_prime_status(struct fsl_udc *udc, int direction)
1278 {
1279 struct fsl_req *req = udc->status_req;
1280 struct fsl_ep *ep;
1281
1282 if (direction == EP_DIR_IN)
1283 udc->ep0_dir = USB_DIR_IN;
1284 else
1285 udc->ep0_dir = USB_DIR_OUT;
1286
1287 ep = &udc->eps[0];
1288 udc->ep0_state = WAIT_FOR_OUT_STATUS;
1289
1290 req->ep = ep;
1291 req->req.length = 0;
1292 req->req.status = -EINPROGRESS;
1293 req->req.actual = 0;
1294 req->req.complete = NULL;
1295 req->dtd_count = 0;
1296
1297 req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
1298 req->req.buf, req->req.length,
1299 ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1300 req->mapped = 1;
1301
1302 if (fsl_req_to_dtd(req) == 0)
1303 fsl_queue_td(ep, req);
1304 else
1305 return -ENOMEM;
1306
1307 list_add_tail(&req->queue, &ep->queue);
1308
1309 return 0;
1310 }
1311
1312 static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
1313 {
1314 struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
1315
1316 if (ep->name)
1317 nuke(ep, -ESHUTDOWN);
1318 }
1319
1320 /*
1321 * ch9 Set address
1322 */
1323 static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length)
1324 {
1325 /* Save the new address to device struct */
1326 udc->device_address = (u8) value;
1327 /* Update usb state */
1328 udc->usb_state = USB_STATE_ADDRESS;
1329 /* Status phase */
1330 if (ep0_prime_status(udc, EP_DIR_IN))
1331 ep0stall(udc);
1332 }
1333
1334 /*
1335 * ch9 Get status
1336 */
1337 static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
1338 u16 index, u16 length)
1339 {
1340 u16 tmp = 0; /* Status, cpu endian */
1341 struct fsl_req *req;
1342 struct fsl_ep *ep;
1343
1344 ep = &udc->eps[0];
1345
1346 if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
1347 /* Get device status */
1348 tmp = 1 << USB_DEVICE_SELF_POWERED;
1349 tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
1350 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
1351 /* Get interface status */
1352 /* We don't have interface information in udc driver */
1353 tmp = 0;
1354 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
1355 /* Get endpoint status */
1356 struct fsl_ep *target_ep;
1357
1358 target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
1359
1360 /* stall if endpoint doesn't exist */
1361 if (!target_ep->desc)
1362 goto stall;
1363 tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
1364 << USB_ENDPOINT_HALT;
1365 }
1366
1367 udc->ep0_dir = USB_DIR_IN;
1368 /* Borrow the per device status_req */
1369 req = udc->status_req;
1370 /* Fill in the reqest structure */
1371 *((u16 *) req->req.buf) = cpu_to_le16(tmp);
1372
1373 req->ep = ep;
1374 req->req.length = 2;
1375 req->req.status = -EINPROGRESS;
1376 req->req.actual = 0;
1377 req->req.complete = NULL;
1378 req->dtd_count = 0;
1379
1380 req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
1381 req->req.buf, req->req.length,
1382 ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1383 req->mapped = 1;
1384
1385 /* prime the data phase */
1386 if ((fsl_req_to_dtd(req) == 0))
1387 fsl_queue_td(ep, req);
1388 else /* no mem */
1389 goto stall;
1390
1391 list_add_tail(&req->queue, &ep->queue);
1392 udc->ep0_state = DATA_STATE_XMIT;
1393 return;
1394 stall:
1395 ep0stall(udc);
1396 }
1397
1398 static void setup_received_irq(struct fsl_udc *udc,
1399 struct usb_ctrlrequest *setup)
1400 {
1401 u16 wValue = le16_to_cpu(setup->wValue);
1402 u16 wIndex = le16_to_cpu(setup->wIndex);
1403 u16 wLength = le16_to_cpu(setup->wLength);
1404
1405 udc_reset_ep_queue(udc, 0);
1406
1407 /* We process some stardard setup requests here */
1408 switch (setup->bRequest) {
1409 case USB_REQ_GET_STATUS:
1410 /* Data+Status phase from udc */
1411 if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
1412 != (USB_DIR_IN | USB_TYPE_STANDARD))
1413 break;
1414 ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength);
1415 return;
1416
1417 case USB_REQ_SET_ADDRESS:
1418 /* Status phase from udc */
1419 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
1420 | USB_RECIP_DEVICE))
1421 break;
1422 ch9setaddress(udc, wValue, wIndex, wLength);
1423 return;
1424
1425 case USB_REQ_CLEAR_FEATURE:
1426 case USB_REQ_SET_FEATURE:
1427 /* Status phase from udc */
1428 {
1429 int rc = -EOPNOTSUPP;
1430 u16 ptc = 0;
1431
1432 if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
1433 == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
1434 int pipe = get_pipe_by_windex(wIndex);
1435 struct fsl_ep *ep;
1436
1437 if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
1438 break;
1439 ep = get_ep_by_pipe(udc, pipe);
1440
1441 spin_unlock(&udc->lock);
1442 rc = fsl_ep_set_halt(&ep->ep,
1443 (setup->bRequest == USB_REQ_SET_FEATURE)
1444 ? 1 : 0);
1445 spin_lock(&udc->lock);
1446
1447 } else if ((setup->bRequestType & (USB_RECIP_MASK
1448 | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
1449 | USB_TYPE_STANDARD)) {
1450 /* Note: The driver has not include OTG support yet.
1451 * This will be set when OTG support is added */
1452 if (wValue == USB_DEVICE_TEST_MODE)
1453 ptc = wIndex >> 8;
1454 else if (gadget_is_otg(&udc->gadget)) {
1455 if (setup->bRequest ==
1456 USB_DEVICE_B_HNP_ENABLE)
1457 udc->gadget.b_hnp_enable = 1;
1458 else if (setup->bRequest ==
1459 USB_DEVICE_A_HNP_SUPPORT)
1460 udc->gadget.a_hnp_support = 1;
1461 else if (setup->bRequest ==
1462 USB_DEVICE_A_ALT_HNP_SUPPORT)
1463 udc->gadget.a_alt_hnp_support = 1;
1464 }
1465 rc = 0;
1466 } else
1467 break;
1468
1469 if (rc == 0) {
1470 if (ep0_prime_status(udc, EP_DIR_IN))
1471 ep0stall(udc);
1472 }
1473 if (ptc) {
1474 u32 tmp;
1475
1476 mdelay(10);
1477 tmp = fsl_readl(&dr_regs->portsc1) | (ptc << 16);
1478 fsl_writel(tmp, &dr_regs->portsc1);
1479 printk(KERN_INFO "udc: switch to test mode %d.\n", ptc);
1480 }
1481
1482 return;
1483 }
1484
1485 default:
1486 break;
1487 }
1488
1489 /* Requests handled by gadget */
1490 if (wLength) {
1491 /* Data phase from gadget, status phase from udc */
1492 udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
1493 ? USB_DIR_IN : USB_DIR_OUT;
1494 spin_unlock(&udc->lock);
1495 if (udc->driver->setup(&udc->gadget,
1496 &udc->local_setup_buff) < 0)
1497 ep0stall(udc);
1498 spin_lock(&udc->lock);
1499 udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
1500 ? DATA_STATE_XMIT : DATA_STATE_RECV;
1501 } else {
1502 /* No data phase, IN status from gadget */
1503 udc->ep0_dir = USB_DIR_IN;
1504 spin_unlock(&udc->lock);
1505 if (udc->driver->setup(&udc->gadget,
1506 &udc->local_setup_buff) < 0)
1507 ep0stall(udc);
1508 spin_lock(&udc->lock);
1509 udc->ep0_state = WAIT_FOR_OUT_STATUS;
1510 }
1511 }
1512
1513 /* Process request for Data or Status phase of ep0
1514 * prime status phase if needed */
1515 static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
1516 struct fsl_req *req)
1517 {
1518 if (udc->usb_state == USB_STATE_ADDRESS) {
1519 /* Set the new address */
1520 u32 new_address = (u32) udc->device_address;
1521 fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS,
1522 &dr_regs->deviceaddr);
1523 }
1524
1525 done(ep0, req, 0);
1526
1527 switch (udc->ep0_state) {
1528 case DATA_STATE_XMIT:
1529 /* receive status phase */
1530 if (ep0_prime_status(udc, EP_DIR_OUT))
1531 ep0stall(udc);
1532 break;
1533 case DATA_STATE_RECV:
1534 /* send status phase */
1535 if (ep0_prime_status(udc, EP_DIR_IN))
1536 ep0stall(udc);
1537 break;
1538 case WAIT_FOR_OUT_STATUS:
1539 udc->ep0_state = WAIT_FOR_SETUP;
1540 break;
1541 case WAIT_FOR_SETUP:
1542 ERR("Unexpect ep0 packets\n");
1543 break;
1544 default:
1545 ep0stall(udc);
1546 break;
1547 }
1548 }
1549
1550 /* Tripwire mechanism to ensure a setup packet payload is extracted without
1551 * being corrupted by another incoming setup packet */
1552 static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr)
1553 {
1554 u32 temp;
1555 struct ep_queue_head *qh;
1556 struct fsl_usb2_platform_data *pdata = udc->pdata;
1557
1558 qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
1559
1560 /* Clear bit in ENDPTSETUPSTAT */
1561 temp = fsl_readl(&dr_regs->endptsetupstat);
1562 fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat);
1563
1564 /* while a hazard exists when setup package arrives */
1565 do {
1566 /* Set Setup Tripwire */
1567 temp = fsl_readl(&dr_regs->usbcmd);
1568 fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
1569
1570 /* Copy the setup packet to local buffer */
1571 if (pdata->le_setup_buf) {
1572 u32 *p = (u32 *)buffer_ptr;
1573 u32 *s = (u32 *)qh->setup_buffer;
1574
1575 /* Convert little endian setup buffer to CPU endian */
1576 *p++ = le32_to_cpu(*s++);
1577 *p = le32_to_cpu(*s);
1578 } else {
1579 memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
1580 }
1581 } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
1582
1583 /* Clear Setup Tripwire */
1584 temp = fsl_readl(&dr_regs->usbcmd);
1585 fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd);
1586 }
1587
1588 /* process-ep_req(): free the completed Tds for this req */
1589 static int process_ep_req(struct fsl_udc *udc, int pipe,
1590 struct fsl_req *curr_req)
1591 {
1592 struct ep_td_struct *curr_td;
1593 int td_complete, actual, remaining_length, j, tmp;
1594 int status = 0;
1595 int errors = 0;
1596 struct ep_queue_head *curr_qh = &udc->ep_qh[pipe];
1597 int direction = pipe % 2;
1598
1599 curr_td = curr_req->head;
1600 td_complete = 0;
1601 actual = curr_req->req.length;
1602
1603 for (j = 0; j < curr_req->dtd_count; j++) {
1604 remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts)
1605 & DTD_PACKET_SIZE)
1606 >> DTD_LENGTH_BIT_POS;
1607 actual -= remaining_length;
1608
1609 errors = hc32_to_cpu(curr_td->size_ioc_sts);
1610 if (errors & DTD_ERROR_MASK) {
1611 if (errors & DTD_STATUS_HALTED) {
1612 ERR("dTD error %08x QH=%d\n", errors, pipe);
1613 /* Clear the errors and Halt condition */
1614 tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
1615 tmp &= ~errors;
1616 curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp);
1617 status = -EPIPE;
1618 /* FIXME: continue with next queued TD? */
1619
1620 break;
1621 }
1622 if (errors & DTD_STATUS_DATA_BUFF_ERR) {
1623 VDBG("Transfer overflow");
1624 status = -EPROTO;
1625 break;
1626 } else if (errors & DTD_STATUS_TRANSACTION_ERR) {
1627 VDBG("ISO error");
1628 status = -EILSEQ;
1629 break;
1630 } else
1631 ERR("Unknown error has occurred (0x%x)!\n",
1632 errors);
1633
1634 } else if (hc32_to_cpu(curr_td->size_ioc_sts)
1635 & DTD_STATUS_ACTIVE) {
1636 VDBG("Request not complete");
1637 status = REQ_UNCOMPLETE;
1638 return status;
1639 } else if (remaining_length) {
1640 if (direction) {
1641 VDBG("Transmit dTD remaining length not zero");
1642 status = -EPROTO;
1643 break;
1644 } else {
1645 td_complete++;
1646 break;
1647 }
1648 } else {
1649 td_complete++;
1650 VDBG("dTD transmitted successful");
1651 }
1652
1653 if (j != curr_req->dtd_count - 1)
1654 curr_td = (struct ep_td_struct *)curr_td->next_td_virt;
1655 }
1656
1657 if (status)
1658 return status;
1659
1660 curr_req->req.actual = actual;
1661
1662 return 0;
1663 }
1664
1665 /* Process a DTD completion interrupt */
1666 static void dtd_complete_irq(struct fsl_udc *udc)
1667 {
1668 u32 bit_pos;
1669 int i, ep_num, direction, bit_mask, status;
1670 struct fsl_ep *curr_ep;
1671 struct fsl_req *curr_req, *temp_req;
1672
1673 /* Clear the bits in the register */
1674 bit_pos = fsl_readl(&dr_regs->endptcomplete);
1675 fsl_writel(bit_pos, &dr_regs->endptcomplete);
1676
1677 if (!bit_pos)
1678 return;
1679
1680 for (i = 0; i < udc->max_ep * 2; i++) {
1681 ep_num = i >> 1;
1682 direction = i % 2;
1683
1684 bit_mask = 1 << (ep_num + 16 * direction);
1685
1686 if (!(bit_pos & bit_mask))
1687 continue;
1688
1689 curr_ep = get_ep_by_pipe(udc, i);
1690
1691 /* If the ep is configured */
1692 if (curr_ep->name == NULL) {
1693 WARNING("Invalid EP?");
1694 continue;
1695 }
1696
1697 /* process the req queue until an uncomplete request */
1698 list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue,
1699 queue) {
1700 status = process_ep_req(udc, i, curr_req);
1701
1702 VDBG("status of process_ep_req= %d, ep = %d",
1703 status, ep_num);
1704 if (status == REQ_UNCOMPLETE)
1705 break;
1706 /* write back status to req */
1707 curr_req->req.status = status;
1708
1709 if (ep_num == 0) {
1710 ep0_req_complete(udc, curr_ep, curr_req);
1711 break;
1712 } else
1713 done(curr_ep, curr_req, status);
1714 }
1715 }
1716 }
1717
1718 /* Process a port change interrupt */
1719 static void port_change_irq(struct fsl_udc *udc)
1720 {
1721 u32 speed;
1722
1723 if (udc->bus_reset)
1724 udc->bus_reset = 0;
1725
1726 /* Bus resetting is finished */
1727 if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
1728 /* Get the speed */
1729 speed = (fsl_readl(&dr_regs->portsc1)
1730 & PORTSCX_PORT_SPEED_MASK);
1731 switch (speed) {
1732 case PORTSCX_PORT_SPEED_HIGH:
1733 udc->gadget.speed = USB_SPEED_HIGH;
1734 break;
1735 case PORTSCX_PORT_SPEED_FULL:
1736 udc->gadget.speed = USB_SPEED_FULL;
1737 break;
1738 case PORTSCX_PORT_SPEED_LOW:
1739 udc->gadget.speed = USB_SPEED_LOW;
1740 break;
1741 default:
1742 udc->gadget.speed = USB_SPEED_UNKNOWN;
1743 break;
1744 }
1745 }
1746
1747 /* Update USB state */
1748 if (!udc->resume_state)
1749 udc->usb_state = USB_STATE_DEFAULT;
1750 }
1751
1752 /* Process suspend interrupt */
1753 static void suspend_irq(struct fsl_udc *udc)
1754 {
1755 udc->resume_state = udc->usb_state;
1756 udc->usb_state = USB_STATE_SUSPENDED;
1757
1758 /* report suspend to the driver, serial.c does not support this */
1759 if (udc->driver->suspend)
1760 udc->driver->suspend(&udc->gadget);
1761 }
1762
1763 static void bus_resume(struct fsl_udc *udc)
1764 {
1765 udc->usb_state = udc->resume_state;
1766 udc->resume_state = 0;
1767
1768 /* report resume to the driver, serial.c does not support this */
1769 if (udc->driver->resume)
1770 udc->driver->resume(&udc->gadget);
1771 }
1772
1773 /* Clear up all ep queues */
1774 static int reset_queues(struct fsl_udc *udc)
1775 {
1776 u8 pipe;
1777
1778 for (pipe = 0; pipe < udc->max_pipes; pipe++)
1779 udc_reset_ep_queue(udc, pipe);
1780
1781 /* report disconnect; the driver is already quiesced */
1782 spin_unlock(&udc->lock);
1783 udc->driver->disconnect(&udc->gadget);
1784 spin_lock(&udc->lock);
1785
1786 return 0;
1787 }
1788
1789 /* Process reset interrupt */
1790 static void reset_irq(struct fsl_udc *udc)
1791 {
1792 u32 temp;
1793 unsigned long timeout;
1794
1795 /* Clear the device address */
1796 temp = fsl_readl(&dr_regs->deviceaddr);
1797 fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr);
1798
1799 udc->device_address = 0;
1800
1801 /* Clear usb state */
1802 udc->resume_state = 0;
1803 udc->ep0_dir = 0;
1804 udc->ep0_state = WAIT_FOR_SETUP;
1805 udc->remote_wakeup = 0; /* default to 0 on reset */
1806 udc->gadget.b_hnp_enable = 0;
1807 udc->gadget.a_hnp_support = 0;
1808 udc->gadget.a_alt_hnp_support = 0;
1809
1810 /* Clear all the setup token semaphores */
1811 temp = fsl_readl(&dr_regs->endptsetupstat);
1812 fsl_writel(temp, &dr_regs->endptsetupstat);
1813
1814 /* Clear all the endpoint complete status bits */
1815 temp = fsl_readl(&dr_regs->endptcomplete);
1816 fsl_writel(temp, &dr_regs->endptcomplete);
1817
1818 timeout = jiffies + 100;
1819 while (fsl_readl(&dr_regs->endpointprime)) {
1820 /* Wait until all endptprime bits cleared */
1821 if (time_after(jiffies, timeout)) {
1822 ERR("Timeout for reset\n");
1823 break;
1824 }
1825 cpu_relax();
1826 }
1827
1828 /* Write 1s to the flush register */
1829 fsl_writel(0xffffffff, &dr_regs->endptflush);
1830
1831 if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
1832 VDBG("Bus reset");
1833 /* Bus is reseting */
1834 udc->bus_reset = 1;
1835 /* Reset all the queues, include XD, dTD, EP queue
1836 * head and TR Queue */
1837 reset_queues(udc);
1838 udc->usb_state = USB_STATE_DEFAULT;
1839 } else {
1840 VDBG("Controller reset");
1841 /* initialize usb hw reg except for regs for EP, not
1842 * touch usbintr reg */
1843 dr_controller_setup(udc);
1844
1845 /* Reset all internal used Queues */
1846 reset_queues(udc);
1847
1848 ep0_setup(udc);
1849
1850 /* Enable DR IRQ reg, Set Run bit, change udc state */
1851 dr_controller_run(udc);
1852 udc->usb_state = USB_STATE_ATTACHED;
1853 }
1854 }
1855
1856 /*
1857 * USB device controller interrupt handler
1858 */
1859 static irqreturn_t fsl_udc_irq(int irq, void *_udc)
1860 {
1861 struct fsl_udc *udc = _udc;
1862 u32 irq_src;
1863 irqreturn_t status = IRQ_NONE;
1864 unsigned long flags;
1865
1866 /* Disable ISR for OTG host mode */
1867 if (udc->stopped)
1868 return IRQ_NONE;
1869 spin_lock_irqsave(&udc->lock, flags);
1870 irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr);
1871 /* Clear notification bits */
1872 fsl_writel(irq_src, &dr_regs->usbsts);
1873
1874 /* VDBG("irq_src [0x%8x]", irq_src); */
1875
1876 /* Need to resume? */
1877 if (udc->usb_state == USB_STATE_SUSPENDED)
1878 if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0)
1879 bus_resume(udc);
1880
1881 /* USB Interrupt */
1882 if (irq_src & USB_STS_INT) {
1883 VDBG("Packet int");
1884 /* Setup package, we only support ep0 as control ep */
1885 if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
1886 tripwire_handler(udc, 0,
1887 (u8 *) (&udc->local_setup_buff));
1888 setup_received_irq(udc, &udc->local_setup_buff);
1889 status = IRQ_HANDLED;
1890 }
1891
1892 /* completion of dtd */
1893 if (fsl_readl(&dr_regs->endptcomplete)) {
1894 dtd_complete_irq(udc);
1895 status = IRQ_HANDLED;
1896 }
1897 }
1898
1899 /* SOF (for ISO transfer) */
1900 if (irq_src & USB_STS_SOF) {
1901 status = IRQ_HANDLED;
1902 }
1903
1904 /* Port Change */
1905 if (irq_src & USB_STS_PORT_CHANGE) {
1906 port_change_irq(udc);
1907 status = IRQ_HANDLED;
1908 }
1909
1910 /* Reset Received */
1911 if (irq_src & USB_STS_RESET) {
1912 VDBG("reset int");
1913 reset_irq(udc);
1914 status = IRQ_HANDLED;
1915 }
1916
1917 /* Sleep Enable (Suspend) */
1918 if (irq_src & USB_STS_SUSPEND) {
1919 suspend_irq(udc);
1920 status = IRQ_HANDLED;
1921 }
1922
1923 if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
1924 VDBG("Error IRQ %x", irq_src);
1925 }
1926
1927 spin_unlock_irqrestore(&udc->lock, flags);
1928 return status;
1929 }
1930
1931 /*----------------------------------------------------------------*
1932 * Hook to gadget drivers
1933 * Called by initialization code of gadget drivers
1934 *----------------------------------------------------------------*/
1935 static int fsl_start(struct usb_gadget_driver *driver,
1936 int (*bind)(struct usb_gadget *))
1937 {
1938 int retval = -ENODEV;
1939 unsigned long flags = 0;
1940
1941 if (!udc_controller)
1942 return -ENODEV;
1943
1944 if (!driver || (driver->speed != USB_SPEED_FULL
1945 && driver->speed != USB_SPEED_HIGH)
1946 || !bind || !driver->disconnect || !driver->setup)
1947 return -EINVAL;
1948
1949 if (udc_controller->driver)
1950 return -EBUSY;
1951
1952 /* lock is needed but whether should use this lock or another */
1953 spin_lock_irqsave(&udc_controller->lock, flags);
1954
1955 driver->driver.bus = NULL;
1956 /* hook up the driver */
1957 udc_controller->driver = driver;
1958 udc_controller->gadget.dev.driver = &driver->driver;
1959 spin_unlock_irqrestore(&udc_controller->lock, flags);
1960
1961 /* bind udc driver to gadget driver */
1962 retval = bind(&udc_controller->gadget);
1963 if (retval) {
1964 VDBG("bind to %s --> %d", driver->driver.name, retval);
1965 udc_controller->gadget.dev.driver = NULL;
1966 udc_controller->driver = NULL;
1967 goto out;
1968 }
1969
1970 if (udc_controller->transceiver) {
1971 /* Suspend the controller until OTG enable it */
1972 udc_controller->stopped = 1;
1973 printk(KERN_INFO "Suspend udc for OTG auto detect\n");
1974
1975 /* connect to bus through transceiver */
1976 if (udc_controller->transceiver) {
1977 retval = otg_set_peripheral(udc_controller->transceiver,
1978 &udc_controller->gadget);
1979 if (retval < 0) {
1980 ERR("can't bind to transceiver\n");
1981 driver->unbind(&udc_controller->gadget);
1982 udc_controller->gadget.dev.driver = 0;
1983 udc_controller->driver = 0;
1984 return retval;
1985 }
1986 }
1987 } else {
1988 /* Enable DR IRQ reg and set USBCMD reg Run bit */
1989 dr_controller_run(udc_controller);
1990 udc_controller->usb_state = USB_STATE_ATTACHED;
1991 udc_controller->ep0_state = WAIT_FOR_SETUP;
1992 udc_controller->ep0_dir = 0;
1993 }
1994 printk(KERN_INFO "%s: bind to driver %s\n",
1995 udc_controller->gadget.name, driver->driver.name);
1996
1997 out:
1998 if (retval)
1999 printk(KERN_WARNING "gadget driver register failed %d\n",
2000 retval);
2001 return retval;
2002 }
2003
2004 /* Disconnect from gadget driver */
2005 static int fsl_stop(struct usb_gadget_driver *driver)
2006 {
2007 struct fsl_ep *loop_ep;
2008 unsigned long flags;
2009
2010 if (!udc_controller)
2011 return -ENODEV;
2012
2013 if (!driver || driver != udc_controller->driver || !driver->unbind)
2014 return -EINVAL;
2015
2016 if (udc_controller->transceiver)
2017 otg_set_peripheral(udc_controller->transceiver, NULL);
2018
2019 /* stop DR, disable intr */
2020 dr_controller_stop(udc_controller);
2021
2022 /* in fact, no needed */
2023 udc_controller->usb_state = USB_STATE_ATTACHED;
2024 udc_controller->ep0_state = WAIT_FOR_SETUP;
2025 udc_controller->ep0_dir = 0;
2026
2027 /* stand operation */
2028 spin_lock_irqsave(&udc_controller->lock, flags);
2029 udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
2030 nuke(&udc_controller->eps[0], -ESHUTDOWN);
2031 list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
2032 ep.ep_list)
2033 nuke(loop_ep, -ESHUTDOWN);
2034 spin_unlock_irqrestore(&udc_controller->lock, flags);
2035
2036 /* report disconnect; the controller is already quiesced */
2037 driver->disconnect(&udc_controller->gadget);
2038
2039 /* unbind gadget and unhook driver. */
2040 driver->unbind(&udc_controller->gadget);
2041 udc_controller->gadget.dev.driver = NULL;
2042 udc_controller->driver = NULL;
2043
2044 printk(KERN_WARNING "unregistered gadget driver '%s'\n",
2045 driver->driver.name);
2046 return 0;
2047 }
2048
2049 /*-------------------------------------------------------------------------
2050 PROC File System Support
2051 -------------------------------------------------------------------------*/
2052 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2053
2054 #include <linux/seq_file.h>
2055
2056 static const char proc_filename[] = "driver/fsl_usb2_udc";
2057
2058 static int fsl_proc_read(char *page, char **start, off_t off, int count,
2059 int *eof, void *_dev)
2060 {
2061 char *buf = page;
2062 char *next = buf;
2063 unsigned size = count;
2064 unsigned long flags;
2065 int t, i;
2066 u32 tmp_reg;
2067 struct fsl_ep *ep = NULL;
2068 struct fsl_req *req;
2069
2070 struct fsl_udc *udc = udc_controller;
2071 if (off != 0)
2072 return 0;
2073
2074 spin_lock_irqsave(&udc->lock, flags);
2075
2076 /* ------basic driver information ---- */
2077 t = scnprintf(next, size,
2078 DRIVER_DESC "\n"
2079 "%s version: %s\n"
2080 "Gadget driver: %s\n\n",
2081 driver_name, DRIVER_VERSION,
2082 udc->driver ? udc->driver->driver.name : "(none)");
2083 size -= t;
2084 next += t;
2085
2086 /* ------ DR Registers ----- */
2087 tmp_reg = fsl_readl(&dr_regs->usbcmd);
2088 t = scnprintf(next, size,
2089 "USBCMD reg:\n"
2090 "SetupTW: %d\n"
2091 "Run/Stop: %s\n\n",
2092 (tmp_reg & USB_CMD_SUTW) ? 1 : 0,
2093 (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
2094 size -= t;
2095 next += t;
2096
2097 tmp_reg = fsl_readl(&dr_regs->usbsts);
2098 t = scnprintf(next, size,
2099 "USB Status Reg:\n"
2100 "Dr Suspend: %d Reset Received: %d System Error: %s "
2101 "USB Error Interrupt: %s\n\n",
2102 (tmp_reg & USB_STS_SUSPEND) ? 1 : 0,
2103 (tmp_reg & USB_STS_RESET) ? 1 : 0,
2104 (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
2105 (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
2106 size -= t;
2107 next += t;
2108
2109 tmp_reg = fsl_readl(&dr_regs->usbintr);
2110 t = scnprintf(next, size,
2111 "USB Intrrupt Enable Reg:\n"
2112 "Sleep Enable: %d SOF Received Enable: %d "
2113 "Reset Enable: %d\n"
2114 "System Error Enable: %d "
2115 "Port Change Dectected Enable: %d\n"
2116 "USB Error Intr Enable: %d USB Intr Enable: %d\n\n",
2117 (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
2118 (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
2119 (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0,
2120 (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0,
2121 (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
2122 (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
2123 (tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
2124 size -= t;
2125 next += t;
2126
2127 tmp_reg = fsl_readl(&dr_regs->frindex);
2128 t = scnprintf(next, size,
2129 "USB Frame Index Reg: Frame Number is 0x%x\n\n",
2130 (tmp_reg & USB_FRINDEX_MASKS));
2131 size -= t;
2132 next += t;
2133
2134 tmp_reg = fsl_readl(&dr_regs->deviceaddr);
2135 t = scnprintf(next, size,
2136 "USB Device Address Reg: Device Addr is 0x%x\n\n",
2137 (tmp_reg & USB_DEVICE_ADDRESS_MASK));
2138 size -= t;
2139 next += t;
2140
2141 tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
2142 t = scnprintf(next, size,
2143 "USB Endpoint List Address Reg: "
2144 "Device Addr is 0x%x\n\n",
2145 (tmp_reg & USB_EP_LIST_ADDRESS_MASK));
2146 size -= t;
2147 next += t;
2148
2149 tmp_reg = fsl_readl(&dr_regs->portsc1);
2150 t = scnprintf(next, size,
2151 "USB Port Status&Control Reg:\n"
2152 "Port Transceiver Type : %s Port Speed: %s\n"
2153 "PHY Low Power Suspend: %s Port Reset: %s "
2154 "Port Suspend Mode: %s\n"
2155 "Over-current Change: %s "
2156 "Port Enable/Disable Change: %s\n"
2157 "Port Enabled/Disabled: %s "
2158 "Current Connect Status: %s\n\n", ( {
2159 char *s;
2160 switch (tmp_reg & PORTSCX_PTS_FSLS) {
2161 case PORTSCX_PTS_UTMI:
2162 s = "UTMI"; break;
2163 case PORTSCX_PTS_ULPI:
2164 s = "ULPI "; break;
2165 case PORTSCX_PTS_FSLS:
2166 s = "FS/LS Serial"; break;
2167 default:
2168 s = "None"; break;
2169 }
2170 s;} ), ( {
2171 char *s;
2172 switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
2173 case PORTSCX_PORT_SPEED_FULL:
2174 s = "Full Speed"; break;
2175 case PORTSCX_PORT_SPEED_LOW:
2176 s = "Low Speed"; break;
2177 case PORTSCX_PORT_SPEED_HIGH:
2178 s = "High Speed"; break;
2179 default:
2180 s = "Undefined"; break;
2181 }
2182 s;
2183 } ),
2184 (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
2185 "Normal PHY mode" : "Low power mode",
2186 (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
2187 "Not in Reset",
2188 (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in",
2189 (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" :
2190 "No",
2191 (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" :
2192 "Not change",
2193 (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" :
2194 "Not correct",
2195 (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
2196 "Attached" : "Not-Att");
2197 size -= t;
2198 next += t;
2199
2200 tmp_reg = fsl_readl(&dr_regs->usbmode);
2201 t = scnprintf(next, size,
2202 "USB Mode Reg: Controller Mode is: %s\n\n", ( {
2203 char *s;
2204 switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
2205 case USB_MODE_CTRL_MODE_IDLE:
2206 s = "Idle"; break;
2207 case USB_MODE_CTRL_MODE_DEVICE:
2208 s = "Device Controller"; break;
2209 case USB_MODE_CTRL_MODE_HOST:
2210 s = "Host Controller"; break;
2211 default:
2212 s = "None"; break;
2213 }
2214 s;
2215 } ));
2216 size -= t;
2217 next += t;
2218
2219 tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
2220 t = scnprintf(next, size,
2221 "Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n",
2222 (tmp_reg & EP_SETUP_STATUS_MASK));
2223 size -= t;
2224 next += t;
2225
2226 for (i = 0; i < udc->max_ep / 2; i++) {
2227 tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
2228 t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n",
2229 i, tmp_reg);
2230 size -= t;
2231 next += t;
2232 }
2233 tmp_reg = fsl_readl(&dr_regs->endpointprime);
2234 t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n\n", tmp_reg);
2235 size -= t;
2236 next += t;
2237
2238 #ifndef CONFIG_ARCH_MXC
2239 if (udc->pdata->have_sysif_regs) {
2240 tmp_reg = usb_sys_regs->snoop1;
2241 t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
2242 size -= t;
2243 next += t;
2244
2245 tmp_reg = usb_sys_regs->control;
2246 t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n",
2247 tmp_reg);
2248 size -= t;
2249 next += t;
2250 }
2251 #endif
2252
2253 /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
2254 ep = &udc->eps[0];
2255 t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n",
2256 ep->ep.name, ep_maxpacket(ep), ep_index(ep));
2257 size -= t;
2258 next += t;
2259
2260 if (list_empty(&ep->queue)) {
2261 t = scnprintf(next, size, "its req queue is empty\n\n");
2262 size -= t;
2263 next += t;
2264 } else {
2265 list_for_each_entry(req, &ep->queue, queue) {
2266 t = scnprintf(next, size,
2267 "req %p actual 0x%x length 0x%x buf %p\n",
2268 &req->req, req->req.actual,
2269 req->req.length, req->req.buf);
2270 size -= t;
2271 next += t;
2272 }
2273 }
2274 /* other gadget->eplist ep */
2275 list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
2276 if (ep->desc) {
2277 t = scnprintf(next, size,
2278 "\nFor %s Maxpkt is 0x%x "
2279 "index is 0x%x\n",
2280 ep->ep.name, ep_maxpacket(ep),
2281 ep_index(ep));
2282 size -= t;
2283 next += t;
2284
2285 if (list_empty(&ep->queue)) {
2286 t = scnprintf(next, size,
2287 "its req queue is empty\n\n");
2288 size -= t;
2289 next += t;
2290 } else {
2291 list_for_each_entry(req, &ep->queue, queue) {
2292 t = scnprintf(next, size,
2293 "req %p actual 0x%x length "
2294 "0x%x buf %p\n",
2295 &req->req, req->req.actual,
2296 req->req.length, req->req.buf);
2297 size -= t;
2298 next += t;
2299 } /* end for each_entry of ep req */
2300 } /* end for else */
2301 } /* end for if(ep->queue) */
2302 } /* end (ep->desc) */
2303
2304 spin_unlock_irqrestore(&udc->lock, flags);
2305
2306 *eof = 1;
2307 return count - size;
2308 }
2309
2310 #define create_proc_file() create_proc_read_entry(proc_filename, \
2311 0, NULL, fsl_proc_read, NULL)
2312
2313 #define remove_proc_file() remove_proc_entry(proc_filename, NULL)
2314
2315 #else /* !CONFIG_USB_GADGET_DEBUG_FILES */
2316
2317 #define create_proc_file() do {} while (0)
2318 #define remove_proc_file() do {} while (0)
2319
2320 #endif /* CONFIG_USB_GADGET_DEBUG_FILES */
2321
2322 /*-------------------------------------------------------------------------*/
2323
2324 /* Release udc structures */
2325 static void fsl_udc_release(struct device *dev)
2326 {
2327 complete(udc_controller->done);
2328 dma_free_coherent(dev->parent, udc_controller->ep_qh_size,
2329 udc_controller->ep_qh, udc_controller->ep_qh_dma);
2330 kfree(udc_controller);
2331 }
2332
2333 /******************************************************************
2334 Internal structure setup functions
2335 *******************************************************************/
2336 /*------------------------------------------------------------------
2337 * init resource for globle controller
2338 * Return the udc handle on success or NULL on failure
2339 ------------------------------------------------------------------*/
2340 static int __init struct_udc_setup(struct fsl_udc *udc,
2341 struct platform_device *pdev)
2342 {
2343 struct fsl_usb2_platform_data *pdata;
2344 size_t size;
2345
2346 pdata = pdev->dev.platform_data;
2347 udc->phy_mode = pdata->phy_mode;
2348
2349 udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL);
2350 if (!udc->eps) {
2351 ERR("malloc fsl_ep failed\n");
2352 return -1;
2353 }
2354
2355 /* initialized QHs, take care of alignment */
2356 size = udc->max_ep * sizeof(struct ep_queue_head);
2357 if (size < QH_ALIGNMENT)
2358 size = QH_ALIGNMENT;
2359 else if ((size % QH_ALIGNMENT) != 0) {
2360 size += QH_ALIGNMENT + 1;
2361 size &= ~(QH_ALIGNMENT - 1);
2362 }
2363 udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
2364 &udc->ep_qh_dma, GFP_KERNEL);
2365 if (!udc->ep_qh) {
2366 ERR("malloc QHs for udc failed\n");
2367 kfree(udc->eps);
2368 return -1;
2369 }
2370
2371 udc->ep_qh_size = size;
2372
2373 /* Initialize ep0 status request structure */
2374 /* FIXME: fsl_alloc_request() ignores ep argument */
2375 udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
2376 struct fsl_req, req);
2377 /* allocate a small amount of memory to get valid address */
2378 udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
2379
2380 udc->resume_state = USB_STATE_NOTATTACHED;
2381 udc->usb_state = USB_STATE_POWERED;
2382 udc->ep0_dir = 0;
2383 udc->remote_wakeup = 0; /* default to 0 on reset */
2384
2385 return 0;
2386 }
2387
2388 /*----------------------------------------------------------------
2389 * Setup the fsl_ep struct for eps
2390 * Link fsl_ep->ep to gadget->ep_list
2391 * ep0out is not used so do nothing here
2392 * ep0in should be taken care
2393 *--------------------------------------------------------------*/
2394 static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
2395 char *name, int link)
2396 {
2397 struct fsl_ep *ep = &udc->eps[index];
2398
2399 ep->udc = udc;
2400 strcpy(ep->name, name);
2401 ep->ep.name = ep->name;
2402
2403 ep->ep.ops = &fsl_ep_ops;
2404 ep->stopped = 0;
2405
2406 /* for ep0: maxP defined in desc
2407 * for other eps, maxP is set by epautoconfig() called by gadget layer
2408 */
2409 ep->ep.maxpacket = (unsigned short) ~0;
2410
2411 /* the queue lists any req for this ep */
2412 INIT_LIST_HEAD(&ep->queue);
2413
2414 /* gagdet.ep_list used for ep_autoconfig so no ep0 */
2415 if (link)
2416 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
2417 ep->gadget = &udc->gadget;
2418 ep->qh = &udc->ep_qh[index];
2419
2420 return 0;
2421 }
2422
2423 /* Driver probe function
2424 * all intialization operations implemented here except enabling usb_intr reg
2425 * board setup should have been done in the platform code
2426 */
2427 static int __init fsl_udc_probe(struct platform_device *pdev)
2428 {
2429 struct fsl_usb2_platform_data *pdata;
2430 struct resource *res;
2431 int ret = -ENODEV;
2432 unsigned int i;
2433 u32 dccparams;
2434
2435 if (strcmp(pdev->name, driver_name)) {
2436 VDBG("Wrong device");
2437 return -ENODEV;
2438 }
2439
2440 udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
2441 if (udc_controller == NULL) {
2442 ERR("malloc udc failed\n");
2443 return -ENOMEM;
2444 }
2445
2446 pdata = pdev->dev.platform_data;
2447 udc_controller->pdata = pdata;
2448 spin_lock_init(&udc_controller->lock);
2449 udc_controller->stopped = 1;
2450
2451 #ifdef CONFIG_USB_OTG
2452 if (pdata->operating_mode == FSL_USB2_DR_OTG) {
2453 udc_controller->transceiver = otg_get_transceiver();
2454 if (!udc_controller->transceiver) {
2455 ERR("Can't find OTG driver!\n");
2456 ret = -ENODEV;
2457 goto err_kfree;
2458 }
2459 }
2460 #endif
2461
2462 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2463 if (!res) {
2464 ret = -ENXIO;
2465 goto err_kfree;
2466 }
2467
2468 if (pdata->operating_mode == FSL_USB2_DR_DEVICE) {
2469 if (!request_mem_region(res->start, resource_size(res),
2470 driver_name)) {
2471 ERR("request mem region for %s failed\n", pdev->name);
2472 ret = -EBUSY;
2473 goto err_kfree;
2474 }
2475 }
2476
2477 dr_regs = ioremap(res->start, resource_size(res));
2478 if (!dr_regs) {
2479 ret = -ENOMEM;
2480 goto err_release_mem_region;
2481 }
2482
2483 pdata->regs = (void *)dr_regs;
2484
2485 /*
2486 * do platform specific init: check the clock, grab/config pins, etc.
2487 */
2488 if (pdata->init && pdata->init(pdev)) {
2489 ret = -ENODEV;
2490 goto err_iounmap_noclk;
2491 }
2492
2493 /* Set accessors only after pdata->init() ! */
2494 fsl_set_accessors(pdata);
2495
2496 #ifndef CONFIG_ARCH_MXC
2497 if (pdata->have_sysif_regs)
2498 usb_sys_regs = (struct usb_sys_interface *)
2499 ((u32)dr_regs + USB_DR_SYS_OFFSET);
2500 #endif
2501
2502 /* Initialize USB clocks */
2503 ret = fsl_udc_clk_init(pdev);
2504 if (ret < 0)
2505 goto err_iounmap_noclk;
2506
2507 /* Read Device Controller Capability Parameters register */
2508 dccparams = fsl_readl(&dr_regs->dccparams);
2509 if (!(dccparams & DCCPARAMS_DC)) {
2510 ERR("This SOC doesn't support device role\n");
2511 ret = -ENODEV;
2512 goto err_iounmap;
2513 }
2514 /* Get max device endpoints */
2515 /* DEN is bidirectional ep number, max_ep doubles the number */
2516 udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
2517
2518 udc_controller->irq = platform_get_irq(pdev, 0);
2519 if (!udc_controller->irq) {
2520 ret = -ENODEV;
2521 goto err_iounmap;
2522 }
2523
2524 ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
2525 driver_name, udc_controller);
2526 if (ret != 0) {
2527 ERR("cannot request irq %d err %d\n",
2528 udc_controller->irq, ret);
2529 goto err_iounmap;
2530 }
2531
2532 /* Initialize the udc structure including QH member and other member */
2533 if (struct_udc_setup(udc_controller, pdev)) {
2534 ERR("Can't initialize udc data structure\n");
2535 ret = -ENOMEM;
2536 goto err_free_irq;
2537 }
2538
2539 if (!udc_controller->transceiver) {
2540 /* initialize usb hw reg except for regs for EP,
2541 * leave usbintr reg untouched */
2542 dr_controller_setup(udc_controller);
2543 }
2544
2545 fsl_udc_clk_finalize(pdev);
2546
2547 /* Setup gadget structure */
2548 udc_controller->gadget.ops = &fsl_gadget_ops;
2549 udc_controller->gadget.is_dualspeed = 1;
2550 udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
2551 INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
2552 udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
2553 udc_controller->gadget.name = driver_name;
2554
2555 /* Setup gadget.dev and register with kernel */
2556 dev_set_name(&udc_controller->gadget.dev, "gadget");
2557 udc_controller->gadget.dev.release = fsl_udc_release;
2558 udc_controller->gadget.dev.parent = &pdev->dev;
2559 ret = device_register(&udc_controller->gadget.dev);
2560 if (ret < 0)
2561 goto err_free_irq;
2562
2563 if (udc_controller->transceiver)
2564 udc_controller->gadget.is_otg = 1;
2565
2566 /* setup QH and epctrl for ep0 */
2567 ep0_setup(udc_controller);
2568
2569 /* setup udc->eps[] for ep0 */
2570 struct_ep_setup(udc_controller, 0, "ep0", 0);
2571 /* for ep0: the desc defined here;
2572 * for other eps, gadget layer called ep_enable with defined desc
2573 */
2574 udc_controller->eps[0].desc = &fsl_ep0_desc;
2575 udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
2576
2577 /* setup the udc->eps[] for non-control endpoints and link
2578 * to gadget.ep_list */
2579 for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) {
2580 char name[14];
2581
2582 sprintf(name, "ep%dout", i);
2583 struct_ep_setup(udc_controller, i * 2, name, 1);
2584 sprintf(name, "ep%din", i);
2585 struct_ep_setup(udc_controller, i * 2 + 1, name, 1);
2586 }
2587
2588 /* use dma_pool for TD management */
2589 udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev,
2590 sizeof(struct ep_td_struct),
2591 DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
2592 if (udc_controller->td_pool == NULL) {
2593 ret = -ENOMEM;
2594 goto err_unregister;
2595 }
2596
2597 ret = usb_add_gadget_udc(&pdev->dev, &udc_controller->gadget);
2598 if (ret)
2599 goto err_del_udc;
2600
2601 create_proc_file();
2602 return 0;
2603
2604 err_del_udc:
2605 dma_pool_destroy(udc_controller->td_pool);
2606 err_unregister:
2607 device_unregister(&udc_controller->gadget.dev);
2608 err_free_irq:
2609 free_irq(udc_controller->irq, udc_controller);
2610 err_iounmap:
2611 if (pdata->exit)
2612 pdata->exit(pdev);
2613 fsl_udc_clk_release();
2614 err_iounmap_noclk:
2615 iounmap(dr_regs);
2616 err_release_mem_region:
2617 if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
2618 release_mem_region(res->start, resource_size(res));
2619 err_kfree:
2620 kfree(udc_controller);
2621 udc_controller = NULL;
2622 return ret;
2623 }
2624
2625 /* Driver removal function
2626 * Free resources and finish pending transactions
2627 */
2628 static int __exit fsl_udc_remove(struct platform_device *pdev)
2629 {
2630 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2631 struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
2632
2633 DECLARE_COMPLETION(done);
2634
2635 if (!udc_controller)
2636 return -ENODEV;
2637
2638 usb_del_gadget_udc(&udc_controller->gadget);
2639 udc_controller->done = &done;
2640
2641 fsl_udc_clk_release();
2642
2643 /* DR has been stopped in usb_gadget_unregister_driver() */
2644 remove_proc_file();
2645
2646 /* Free allocated memory */
2647 kfree(udc_controller->status_req->req.buf);
2648 kfree(udc_controller->status_req);
2649 kfree(udc_controller->eps);
2650
2651 dma_pool_destroy(udc_controller->td_pool);
2652 free_irq(udc_controller->irq, udc_controller);
2653 iounmap(dr_regs);
2654 if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
2655 release_mem_region(res->start, resource_size(res));
2656
2657 device_unregister(&udc_controller->gadget.dev);
2658 /* free udc --wait for the release() finished */
2659 wait_for_completion(&done);
2660
2661 /*
2662 * do platform specific un-initialization:
2663 * release iomux pins, etc.
2664 */
2665 if (pdata->exit)
2666 pdata->exit(pdev);
2667
2668 return 0;
2669 }
2670
2671 /*-----------------------------------------------------------------
2672 * Modify Power management attributes
2673 * Used by OTG statemachine to disable gadget temporarily
2674 -----------------------------------------------------------------*/
2675 static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state)
2676 {
2677 dr_controller_stop(udc_controller);
2678 return 0;
2679 }
2680
2681 /*-----------------------------------------------------------------
2682 * Invoked on USB resume. May be called in_interrupt.
2683 * Here we start the DR controller and enable the irq
2684 *-----------------------------------------------------------------*/
2685 static int fsl_udc_resume(struct platform_device *pdev)
2686 {
2687 /* Enable DR irq reg and set controller Run */
2688 if (udc_controller->stopped) {
2689 dr_controller_setup(udc_controller);
2690 dr_controller_run(udc_controller);
2691 }
2692 udc_controller->usb_state = USB_STATE_ATTACHED;
2693 udc_controller->ep0_state = WAIT_FOR_SETUP;
2694 udc_controller->ep0_dir = 0;
2695 return 0;
2696 }
2697
2698 static int fsl_udc_otg_suspend(struct device *dev, pm_message_t state)
2699 {
2700 struct fsl_udc *udc = udc_controller;
2701 u32 mode, usbcmd;
2702
2703 mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK;
2704
2705 pr_debug("%s(): mode 0x%x stopped %d\n", __func__, mode, udc->stopped);
2706
2707 /*
2708 * If the controller is already stopped, then this must be a
2709 * PM suspend. Remember this fact, so that we will leave the
2710 * controller stopped at PM resume time.
2711 */
2712 if (udc->stopped) {
2713 pr_debug("gadget already stopped, leaving early\n");
2714 udc->already_stopped = 1;
2715 return 0;
2716 }
2717
2718 if (mode != USB_MODE_CTRL_MODE_DEVICE) {
2719 pr_debug("gadget not in device mode, leaving early\n");
2720 return 0;
2721 }
2722
2723 /* stop the controller */
2724 usbcmd = fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP;
2725 fsl_writel(usbcmd, &dr_regs->usbcmd);
2726
2727 udc->stopped = 1;
2728
2729 pr_info("USB Gadget suspended\n");
2730
2731 return 0;
2732 }
2733
2734 static int fsl_udc_otg_resume(struct device *dev)
2735 {
2736 pr_debug("%s(): stopped %d already_stopped %d\n", __func__,
2737 udc_controller->stopped, udc_controller->already_stopped);
2738
2739 /*
2740 * If the controller was stopped at suspend time, then
2741 * don't resume it now.
2742 */
2743 if (udc_controller->already_stopped) {
2744 udc_controller->already_stopped = 0;
2745 pr_debug("gadget was already stopped, leaving early\n");
2746 return 0;
2747 }
2748
2749 pr_info("USB Gadget resume\n");
2750
2751 return fsl_udc_resume(NULL);
2752 }
2753
2754 /*-------------------------------------------------------------------------
2755 Register entry point for the peripheral controller driver
2756 --------------------------------------------------------------------------*/
2757
2758 static struct platform_driver udc_driver = {
2759 .remove = __exit_p(fsl_udc_remove),
2760 /* these suspend and resume are not usb suspend and resume */
2761 .suspend = fsl_udc_suspend,
2762 .resume = fsl_udc_resume,
2763 .driver = {
2764 .name = (char *)driver_name,
2765 .owner = THIS_MODULE,
2766 /* udc suspend/resume called from OTG driver */
2767 .suspend = fsl_udc_otg_suspend,
2768 .resume = fsl_udc_otg_resume,
2769 },
2770 };
2771
2772 static int __init udc_init(void)
2773 {
2774 printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION);
2775 return platform_driver_probe(&udc_driver, fsl_udc_probe);
2776 }
2777
2778 module_init(udc_init);
2779
2780 static void __exit udc_exit(void)
2781 {
2782 platform_driver_unregister(&udc_driver);
2783 printk(KERN_WARNING "%s unregistered\n", driver_desc);
2784 }
2785
2786 module_exit(udc_exit);
2787
2788 MODULE_DESCRIPTION(DRIVER_DESC);
2789 MODULE_AUTHOR(DRIVER_AUTHOR);
2790 MODULE_LICENSE("GPL");
2791 MODULE_ALIAS("platform:fsl-usb2-udc");
linux-next