include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / usb / host / ehci-hub.c
blobe051b30c1847804f6b94e188521a865e036108ea
1 /*
2 * Copyright (C) 2001-2004 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 /* this file is part of ehci-hcd.c */
21 /*-------------------------------------------------------------------------*/
24 * EHCI Root Hub ... the nonsharable stuff
26 * Registers don't need cpu_to_le32, that happens transparently
29 /*-------------------------------------------------------------------------*/
30 #include <linux/usb/otg.h>
32 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
34 #ifdef CONFIG_PM
36 static int ehci_hub_control(
37 struct usb_hcd *hcd,
38 u16 typeReq,
39 u16 wValue,
40 u16 wIndex,
41 char *buf,
42 u16 wLength
45 /* After a power loss, ports that were owned by the companion must be
46 * reset so that the companion can still own them.
48 static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
50 u32 __iomem *reg;
51 u32 status;
52 int port;
53 __le32 buf;
54 struct usb_hcd *hcd = ehci_to_hcd(ehci);
56 if (!ehci->owned_ports)
57 return;
59 /* Give the connections some time to appear */
60 msleep(20);
62 port = HCS_N_PORTS(ehci->hcs_params);
63 while (port--) {
64 if (test_bit(port, &ehci->owned_ports)) {
65 reg = &ehci->regs->port_status[port];
66 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
68 /* Port already owned by companion? */
69 if (status & PORT_OWNER)
70 clear_bit(port, &ehci->owned_ports);
71 else if (test_bit(port, &ehci->companion_ports))
72 ehci_writel(ehci, status & ~PORT_PE, reg);
73 else
74 ehci_hub_control(hcd, SetPortFeature,
75 USB_PORT_FEAT_RESET, port + 1,
76 NULL, 0);
80 if (!ehci->owned_ports)
81 return;
82 msleep(90); /* Wait for resets to complete */
84 port = HCS_N_PORTS(ehci->hcs_params);
85 while (port--) {
86 if (test_bit(port, &ehci->owned_ports)) {
87 ehci_hub_control(hcd, GetPortStatus,
88 0, port + 1,
89 (char *) &buf, sizeof(buf));
91 /* The companion should now own the port,
92 * but if something went wrong the port must not
93 * remain enabled.
95 reg = &ehci->regs->port_status[port];
96 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
97 if (status & PORT_OWNER)
98 ehci_writel(ehci, status | PORT_CSC, reg);
99 else {
100 ehci_dbg(ehci, "failed handover port %d: %x\n",
101 port + 1, status);
102 ehci_writel(ehci, status & ~PORT_PE, reg);
107 ehci->owned_ports = 0;
110 static int ehci_port_change(struct ehci_hcd *ehci)
112 int i = HCS_N_PORTS(ehci->hcs_params);
114 /* First check if the controller indicates a change event */
116 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
117 return 1;
120 * Not all controllers appear to update this while going from D3 to D0,
121 * so check the individual port status registers as well
124 while (i--)
125 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
126 return 1;
128 return 0;
131 static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
132 bool suspending, bool do_wakeup)
134 int port;
135 u32 temp;
136 unsigned long flags;
138 /* If remote wakeup is enabled for the root hub but disabled
139 * for the controller, we must adjust all the port wakeup flags
140 * when the controller is suspended or resumed. In all other
141 * cases they don't need to be changed.
143 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
144 return;
146 spin_lock_irqsave(&ehci->lock, flags);
148 /* clear phy low-power mode before changing wakeup flags */
149 if (ehci->has_hostpc) {
150 port = HCS_N_PORTS(ehci->hcs_params);
151 while (port--) {
152 u32 __iomem *hostpc_reg;
154 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
155 + HOSTPC0 + 4 * port);
156 temp = ehci_readl(ehci, hostpc_reg);
157 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
159 spin_unlock_irqrestore(&ehci->lock, flags);
160 msleep(5);
161 spin_lock_irqsave(&ehci->lock, flags);
164 port = HCS_N_PORTS(ehci->hcs_params);
165 while (port--) {
166 u32 __iomem *reg = &ehci->regs->port_status[port];
167 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
168 u32 t2 = t1 & ~PORT_WAKE_BITS;
170 /* If we are suspending the controller, clear the flags.
171 * If we are resuming the controller, set the wakeup flags.
173 if (!suspending) {
174 if (t1 & PORT_CONNECT)
175 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
176 else
177 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
179 ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
180 port + 1, t1, t2);
181 ehci_writel(ehci, t2, reg);
184 /* enter phy low-power mode again */
185 if (ehci->has_hostpc) {
186 port = HCS_N_PORTS(ehci->hcs_params);
187 while (port--) {
188 u32 __iomem *hostpc_reg;
190 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
191 + HOSTPC0 + 4 * port);
192 temp = ehci_readl(ehci, hostpc_reg);
193 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
197 /* Does the root hub have a port wakeup pending? */
198 if (!suspending && ehci_port_change(ehci))
199 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
201 spin_unlock_irqrestore(&ehci->lock, flags);
204 static int ehci_bus_suspend (struct usb_hcd *hcd)
206 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
207 int port;
208 int mask;
209 int changed;
211 ehci_dbg(ehci, "suspend root hub\n");
213 if (time_before (jiffies, ehci->next_statechange))
214 msleep(5);
215 del_timer_sync(&ehci->watchdog);
216 del_timer_sync(&ehci->iaa_watchdog);
218 spin_lock_irq (&ehci->lock);
220 /* Once the controller is stopped, port resumes that are already
221 * in progress won't complete. Hence if remote wakeup is enabled
222 * for the root hub and any ports are in the middle of a resume or
223 * remote wakeup, we must fail the suspend.
225 if (hcd->self.root_hub->do_remote_wakeup) {
226 port = HCS_N_PORTS(ehci->hcs_params);
227 while (port--) {
228 if (ehci->reset_done[port] != 0) {
229 spin_unlock_irq(&ehci->lock);
230 ehci_dbg(ehci, "suspend failed because "
231 "port %d is resuming\n",
232 port + 1);
233 return -EBUSY;
238 /* stop schedules, clean any completed work */
239 if (HC_IS_RUNNING(hcd->state)) {
240 ehci_quiesce (ehci);
241 hcd->state = HC_STATE_QUIESCING;
243 ehci->command = ehci_readl(ehci, &ehci->regs->command);
244 ehci_work(ehci);
246 /* Unlike other USB host controller types, EHCI doesn't have
247 * any notion of "global" or bus-wide suspend. The driver has
248 * to manually suspend all the active unsuspended ports, and
249 * then manually resume them in the bus_resume() routine.
251 ehci->bus_suspended = 0;
252 ehci->owned_ports = 0;
253 changed = 0;
254 port = HCS_N_PORTS(ehci->hcs_params);
255 while (port--) {
256 u32 __iomem *reg = &ehci->regs->port_status [port];
257 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
258 u32 t2 = t1 & ~PORT_WAKE_BITS;
260 /* keep track of which ports we suspend */
261 if (t1 & PORT_OWNER)
262 set_bit(port, &ehci->owned_ports);
263 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
264 t2 |= PORT_SUSPEND;
265 set_bit(port, &ehci->bus_suspended);
268 /* enable remote wakeup on all ports, if told to do so */
269 if (hcd->self.root_hub->do_remote_wakeup) {
270 /* only enable appropriate wake bits, otherwise the
271 * hardware can not go phy low power mode. If a race
272 * condition happens here(connection change during bits
273 * set), the port change detection will finally fix it.
275 if (t1 & PORT_CONNECT)
276 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
277 else
278 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
281 if (t1 != t2) {
282 ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
283 port + 1, t1, t2);
284 ehci_writel(ehci, t2, reg);
285 changed = 1;
289 if (changed && ehci->has_hostpc) {
290 spin_unlock_irq(&ehci->lock);
291 msleep(5); /* 5 ms for HCD to enter low-power mode */
292 spin_lock_irq(&ehci->lock);
294 port = HCS_N_PORTS(ehci->hcs_params);
295 while (port--) {
296 u32 __iomem *hostpc_reg;
297 u32 t3;
299 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
300 + HOSTPC0 + 4 * port);
301 t3 = ehci_readl(ehci, hostpc_reg);
302 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
303 t3 = ehci_readl(ehci, hostpc_reg);
304 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
305 port, (t3 & HOSTPC_PHCD) ?
306 "succeeded" : "failed");
310 /* Apparently some devices need a >= 1-uframe delay here */
311 if (ehci->bus_suspended)
312 udelay(150);
314 /* turn off now-idle HC */
315 ehci_halt (ehci);
316 hcd->state = HC_STATE_SUSPENDED;
318 if (ehci->reclaim)
319 end_unlink_async(ehci);
321 /* allow remote wakeup */
322 mask = INTR_MASK;
323 if (!hcd->self.root_hub->do_remote_wakeup)
324 mask &= ~STS_PCD;
325 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
326 ehci_readl(ehci, &ehci->regs->intr_enable);
328 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
329 spin_unlock_irq (&ehci->lock);
331 /* ehci_work() may have re-enabled the watchdog timer, which we do not
332 * want, and so we must delete any pending watchdog timer events.
334 del_timer_sync(&ehci->watchdog);
335 return 0;
339 /* caller has locked the root hub, and should reset/reinit on error */
340 static int ehci_bus_resume (struct usb_hcd *hcd)
342 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
343 u32 temp;
344 u32 power_okay;
345 int i;
346 u8 resume_needed = 0;
348 if (time_before (jiffies, ehci->next_statechange))
349 msleep(5);
350 spin_lock_irq (&ehci->lock);
351 if (!HCD_HW_ACCESSIBLE(hcd)) {
352 spin_unlock_irq(&ehci->lock);
353 return -ESHUTDOWN;
356 if (unlikely(ehci->debug)) {
357 if (!dbgp_reset_prep())
358 ehci->debug = NULL;
359 else
360 dbgp_external_startup();
363 /* Ideally and we've got a real resume here, and no port's power
364 * was lost. (For PCI, that means Vaux was maintained.) But we
365 * could instead be restoring a swsusp snapshot -- so that BIOS was
366 * the last user of the controller, not reset/pm hardware keeping
367 * state we gave to it.
369 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
370 ehci_dbg(ehci, "resume root hub%s\n",
371 power_okay ? "" : " after power loss");
373 /* at least some APM implementations will try to deliver
374 * IRQs right away, so delay them until we're ready.
376 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
378 /* re-init operational registers */
379 ehci_writel(ehci, 0, &ehci->regs->segment);
380 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
381 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
383 /* restore CMD_RUN, framelist size, and irq threshold */
384 ehci_writel(ehci, ehci->command, &ehci->regs->command);
386 /* Some controller/firmware combinations need a delay during which
387 * they set up the port statuses. See Bugzilla #8190. */
388 spin_unlock_irq(&ehci->lock);
389 msleep(8);
390 spin_lock_irq(&ehci->lock);
392 /* clear phy low-power mode before resume */
393 if (ehci->bus_suspended && ehci->has_hostpc) {
394 i = HCS_N_PORTS(ehci->hcs_params);
395 while (i--) {
396 if (test_bit(i, &ehci->bus_suspended)) {
397 u32 __iomem *hostpc_reg;
399 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
400 + HOSTPC0 + 4 * i);
401 temp = ehci_readl(ehci, hostpc_reg);
402 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
403 hostpc_reg);
406 spin_unlock_irq(&ehci->lock);
407 msleep(5);
408 spin_lock_irq(&ehci->lock);
411 /* manually resume the ports we suspended during bus_suspend() */
412 i = HCS_N_PORTS (ehci->hcs_params);
413 while (i--) {
414 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
415 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
416 if (test_bit(i, &ehci->bus_suspended) &&
417 (temp & PORT_SUSPEND)) {
418 temp |= PORT_RESUME;
419 resume_needed = 1;
421 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
424 /* msleep for 20ms only if code is trying to resume port */
425 if (resume_needed) {
426 spin_unlock_irq(&ehci->lock);
427 msleep(20);
428 spin_lock_irq(&ehci->lock);
431 i = HCS_N_PORTS (ehci->hcs_params);
432 while (i--) {
433 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
434 if (test_bit(i, &ehci->bus_suspended) &&
435 (temp & PORT_SUSPEND)) {
436 temp &= ~(PORT_RWC_BITS | PORT_RESUME);
437 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
438 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
441 (void) ehci_readl(ehci, &ehci->regs->command);
443 /* maybe re-activate the schedule(s) */
444 temp = 0;
445 if (ehci->async->qh_next.qh)
446 temp |= CMD_ASE;
447 if (ehci->periodic_sched)
448 temp |= CMD_PSE;
449 if (temp) {
450 ehci->command |= temp;
451 ehci_writel(ehci, ehci->command, &ehci->regs->command);
454 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
455 hcd->state = HC_STATE_RUNNING;
457 /* Now we can safely re-enable irqs */
458 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
460 spin_unlock_irq (&ehci->lock);
461 ehci_handover_companion_ports(ehci);
462 return 0;
465 #else
467 #define ehci_bus_suspend NULL
468 #define ehci_bus_resume NULL
470 #endif /* CONFIG_PM */
472 /*-------------------------------------------------------------------------*/
475 * Sets the owner of a port
477 static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
479 u32 __iomem *status_reg;
480 u32 port_status;
481 int try;
483 status_reg = &ehci->regs->port_status[portnum];
486 * The controller won't set the OWNER bit if the port is
487 * enabled, so this loop will sometimes require at least two
488 * iterations: one to disable the port and one to set OWNER.
490 for (try = 4; try > 0; --try) {
491 spin_lock_irq(&ehci->lock);
492 port_status = ehci_readl(ehci, status_reg);
493 if ((port_status & PORT_OWNER) == new_owner
494 || (port_status & (PORT_OWNER | PORT_CONNECT))
495 == 0)
496 try = 0;
497 else {
498 port_status ^= PORT_OWNER;
499 port_status &= ~(PORT_PE | PORT_RWC_BITS);
500 ehci_writel(ehci, port_status, status_reg);
502 spin_unlock_irq(&ehci->lock);
503 if (try > 1)
504 msleep(5);
508 /*-------------------------------------------------------------------------*/
510 static int check_reset_complete (
511 struct ehci_hcd *ehci,
512 int index,
513 u32 __iomem *status_reg,
514 int port_status
516 if (!(port_status & PORT_CONNECT))
517 return port_status;
519 /* if reset finished and it's still not enabled -- handoff */
520 if (!(port_status & PORT_PE)) {
522 /* with integrated TT, there's nobody to hand it to! */
523 if (ehci_is_TDI(ehci)) {
524 ehci_dbg (ehci,
525 "Failed to enable port %d on root hub TT\n",
526 index+1);
527 return port_status;
530 ehci_dbg (ehci, "port %d full speed --> companion\n",
531 index + 1);
533 // what happens if HCS_N_CC(params) == 0 ?
534 port_status |= PORT_OWNER;
535 port_status &= ~PORT_RWC_BITS;
536 ehci_writel(ehci, port_status, status_reg);
538 /* ensure 440EPX ohci controller state is operational */
539 if (ehci->has_amcc_usb23)
540 set_ohci_hcfs(ehci, 1);
541 } else {
542 ehci_dbg (ehci, "port %d high speed\n", index + 1);
543 /* ensure 440EPx ohci controller state is suspended */
544 if (ehci->has_amcc_usb23)
545 set_ohci_hcfs(ehci, 0);
548 return port_status;
551 /*-------------------------------------------------------------------------*/
554 /* build "status change" packet (one or two bytes) from HC registers */
556 static int
557 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
559 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
560 u32 temp, status = 0;
561 u32 mask;
562 int ports, i, retval = 1;
563 unsigned long flags;
564 u32 ppcd = 0;
566 /* if !USB_SUSPEND, root hub timers won't get shut down ... */
567 if (!HC_IS_RUNNING(hcd->state))
568 return 0;
570 /* init status to no-changes */
571 buf [0] = 0;
572 ports = HCS_N_PORTS (ehci->hcs_params);
573 if (ports > 7) {
574 buf [1] = 0;
575 retval++;
578 /* Some boards (mostly VIA?) report bogus overcurrent indications,
579 * causing massive log spam unless we completely ignore them. It
580 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
581 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
582 * PORT_POWER; that's surprising, but maybe within-spec.
584 if (!ignore_oc)
585 mask = PORT_CSC | PORT_PEC | PORT_OCC;
586 else
587 mask = PORT_CSC | PORT_PEC;
588 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
590 /* no hub change reports (bit 0) for now (power, ...) */
592 /* port N changes (bit N)? */
593 spin_lock_irqsave (&ehci->lock, flags);
595 /* get per-port change detect bits */
596 if (ehci->has_ppcd)
597 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
599 for (i = 0; i < ports; i++) {
600 /* leverage per-port change bits feature */
601 if (ehci->has_ppcd && !(ppcd & (1 << i)))
602 continue;
603 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
606 * Return status information even for ports with OWNER set.
607 * Otherwise khubd wouldn't see the disconnect event when a
608 * high-speed device is switched over to the companion
609 * controller by the user.
612 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
613 || (ehci->reset_done[i] && time_after_eq(
614 jiffies, ehci->reset_done[i]))) {
615 if (i < 7)
616 buf [0] |= 1 << (i + 1);
617 else
618 buf [1] |= 1 << (i - 7);
619 status = STS_PCD;
622 /* FIXME autosuspend idle root hubs */
623 spin_unlock_irqrestore (&ehci->lock, flags);
624 return status ? retval : 0;
627 /*-------------------------------------------------------------------------*/
629 static void
630 ehci_hub_descriptor (
631 struct ehci_hcd *ehci,
632 struct usb_hub_descriptor *desc
634 int ports = HCS_N_PORTS (ehci->hcs_params);
635 u16 temp;
637 desc->bDescriptorType = 0x29;
638 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
639 desc->bHubContrCurrent = 0;
641 desc->bNbrPorts = ports;
642 temp = 1 + (ports / 8);
643 desc->bDescLength = 7 + 2 * temp;
645 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
646 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
647 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
649 temp = 0x0008; /* per-port overcurrent reporting */
650 if (HCS_PPC (ehci->hcs_params))
651 temp |= 0x0001; /* per-port power control */
652 else
653 temp |= 0x0002; /* no power switching */
654 #if 0
655 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
656 if (HCS_INDICATOR (ehci->hcs_params))
657 temp |= 0x0080; /* per-port indicators (LEDs) */
658 #endif
659 desc->wHubCharacteristics = cpu_to_le16(temp);
662 /*-------------------------------------------------------------------------*/
664 static int ehci_hub_control (
665 struct usb_hcd *hcd,
666 u16 typeReq,
667 u16 wValue,
668 u16 wIndex,
669 char *buf,
670 u16 wLength
672 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
673 int ports = HCS_N_PORTS (ehci->hcs_params);
674 u32 __iomem *status_reg = &ehci->regs->port_status[
675 (wIndex & 0xff) - 1];
676 u32 __iomem *hostpc_reg = NULL;
677 u32 temp, temp1, status;
678 unsigned long flags;
679 int retval = 0;
680 unsigned selector;
683 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
684 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
685 * (track current state ourselves) ... blink for diagnostics,
686 * power, "this is the one", etc. EHCI spec supports this.
689 if (ehci->has_hostpc)
690 hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
691 + HOSTPC0 + 4 * ((wIndex & 0xff) - 1));
692 spin_lock_irqsave (&ehci->lock, flags);
693 switch (typeReq) {
694 case ClearHubFeature:
695 switch (wValue) {
696 case C_HUB_LOCAL_POWER:
697 case C_HUB_OVER_CURRENT:
698 /* no hub-wide feature/status flags */
699 break;
700 default:
701 goto error;
703 break;
704 case ClearPortFeature:
705 if (!wIndex || wIndex > ports)
706 goto error;
707 wIndex--;
708 temp = ehci_readl(ehci, status_reg);
711 * Even if OWNER is set, so the port is owned by the
712 * companion controller, khubd needs to be able to clear
713 * the port-change status bits (especially
714 * USB_PORT_STAT_C_CONNECTION).
717 switch (wValue) {
718 case USB_PORT_FEAT_ENABLE:
719 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
720 break;
721 case USB_PORT_FEAT_C_ENABLE:
722 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
723 status_reg);
724 break;
725 case USB_PORT_FEAT_SUSPEND:
726 if (temp & PORT_RESET)
727 goto error;
728 if (ehci->no_selective_suspend)
729 break;
730 #ifdef CONFIG_USB_OTG
731 if ((hcd->self.otg_port == (wIndex + 1))
732 && hcd->self.b_hnp_enable) {
733 otg_start_hnp(ehci->transceiver);
734 break;
736 #endif
737 if (!(temp & PORT_SUSPEND))
738 break;
739 if ((temp & PORT_PE) == 0)
740 goto error;
742 /* clear phy low-power mode before resume */
743 if (hostpc_reg) {
744 temp1 = ehci_readl(ehci, hostpc_reg);
745 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
746 hostpc_reg);
747 spin_unlock_irqrestore(&ehci->lock, flags);
748 msleep(5);/* wait to leave low-power mode */
749 spin_lock_irqsave(&ehci->lock, flags);
751 /* resume signaling for 20 msec */
752 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
753 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
754 ehci->reset_done[wIndex] = jiffies
755 + msecs_to_jiffies(20);
756 break;
757 case USB_PORT_FEAT_C_SUSPEND:
758 clear_bit(wIndex, &ehci->port_c_suspend);
759 break;
760 case USB_PORT_FEAT_POWER:
761 if (HCS_PPC (ehci->hcs_params))
762 ehci_writel(ehci,
763 temp & ~(PORT_RWC_BITS | PORT_POWER),
764 status_reg);
765 break;
766 case USB_PORT_FEAT_C_CONNECTION:
767 if (ehci->has_lpm) {
768 /* clear PORTSC bits on disconnect */
769 temp &= ~PORT_LPM;
770 temp &= ~PORT_DEV_ADDR;
772 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
773 status_reg);
774 break;
775 case USB_PORT_FEAT_C_OVER_CURRENT:
776 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
777 status_reg);
778 break;
779 case USB_PORT_FEAT_C_RESET:
780 /* GetPortStatus clears reset */
781 break;
782 default:
783 goto error;
785 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
786 break;
787 case GetHubDescriptor:
788 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
789 buf);
790 break;
791 case GetHubStatus:
792 /* no hub-wide feature/status flags */
793 memset (buf, 0, 4);
794 //cpu_to_le32s ((u32 *) buf);
795 break;
796 case GetPortStatus:
797 if (!wIndex || wIndex > ports)
798 goto error;
799 wIndex--;
800 status = 0;
801 temp = ehci_readl(ehci, status_reg);
803 // wPortChange bits
804 if (temp & PORT_CSC)
805 status |= USB_PORT_STAT_C_CONNECTION << 16;
806 if (temp & PORT_PEC)
807 status |= USB_PORT_STAT_C_ENABLE << 16;
809 if ((temp & PORT_OCC) && !ignore_oc){
810 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
813 * Hubs should disable port power on over-current.
814 * However, not all EHCI implementations do this
815 * automatically, even if they _do_ support per-port
816 * power switching; they're allowed to just limit the
817 * current. khubd will turn the power back on.
819 if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
820 ehci_writel(ehci,
821 temp & ~(PORT_RWC_BITS | PORT_POWER),
822 status_reg);
823 temp = ehci_readl(ehci, status_reg);
827 /* whoever resumes must GetPortStatus to complete it!! */
828 if (temp & PORT_RESUME) {
830 /* Remote Wakeup received? */
831 if (!ehci->reset_done[wIndex]) {
832 /* resume signaling for 20 msec */
833 ehci->reset_done[wIndex] = jiffies
834 + msecs_to_jiffies(20);
835 /* check the port again */
836 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
837 ehci->reset_done[wIndex]);
840 /* resume completed? */
841 else if (time_after_eq(jiffies,
842 ehci->reset_done[wIndex])) {
843 clear_bit(wIndex, &ehci->suspended_ports);
844 set_bit(wIndex, &ehci->port_c_suspend);
845 ehci->reset_done[wIndex] = 0;
847 /* stop resume signaling */
848 temp = ehci_readl(ehci, status_reg);
849 ehci_writel(ehci,
850 temp & ~(PORT_RWC_BITS | PORT_RESUME),
851 status_reg);
852 retval = handshake(ehci, status_reg,
853 PORT_RESUME, 0, 2000 /* 2msec */);
854 if (retval != 0) {
855 ehci_err(ehci,
856 "port %d resume error %d\n",
857 wIndex + 1, retval);
858 goto error;
860 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
864 /* whoever resets must GetPortStatus to complete it!! */
865 if ((temp & PORT_RESET)
866 && time_after_eq(jiffies,
867 ehci->reset_done[wIndex])) {
868 status |= USB_PORT_STAT_C_RESET << 16;
869 ehci->reset_done [wIndex] = 0;
871 /* force reset to complete */
872 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
873 status_reg);
874 /* REVISIT: some hardware needs 550+ usec to clear
875 * this bit; seems too long to spin routinely...
877 retval = handshake(ehci, status_reg,
878 PORT_RESET, 0, 1000);
879 if (retval != 0) {
880 ehci_err (ehci, "port %d reset error %d\n",
881 wIndex + 1, retval);
882 goto error;
885 /* see what we found out */
886 temp = check_reset_complete (ehci, wIndex, status_reg,
887 ehci_readl(ehci, status_reg));
890 if (!(temp & (PORT_RESUME|PORT_RESET)))
891 ehci->reset_done[wIndex] = 0;
893 /* transfer dedicated ports to the companion hc */
894 if ((temp & PORT_CONNECT) &&
895 test_bit(wIndex, &ehci->companion_ports)) {
896 temp &= ~PORT_RWC_BITS;
897 temp |= PORT_OWNER;
898 ehci_writel(ehci, temp, status_reg);
899 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
900 temp = ehci_readl(ehci, status_reg);
904 * Even if OWNER is set, there's no harm letting khubd
905 * see the wPortStatus values (they should all be 0 except
906 * for PORT_POWER anyway).
909 if (temp & PORT_CONNECT) {
910 status |= USB_PORT_STAT_CONNECTION;
911 // status may be from integrated TT
912 if (ehci->has_hostpc) {
913 temp1 = ehci_readl(ehci, hostpc_reg);
914 status |= ehci_port_speed(ehci, temp1);
915 } else
916 status |= ehci_port_speed(ehci, temp);
918 if (temp & PORT_PE)
919 status |= USB_PORT_STAT_ENABLE;
921 /* maybe the port was unsuspended without our knowledge */
922 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
923 status |= USB_PORT_STAT_SUSPEND;
924 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
925 clear_bit(wIndex, &ehci->suspended_ports);
926 ehci->reset_done[wIndex] = 0;
927 if (temp & PORT_PE)
928 set_bit(wIndex, &ehci->port_c_suspend);
931 if (temp & PORT_OC)
932 status |= USB_PORT_STAT_OVERCURRENT;
933 if (temp & PORT_RESET)
934 status |= USB_PORT_STAT_RESET;
935 if (temp & PORT_POWER)
936 status |= USB_PORT_STAT_POWER;
937 if (test_bit(wIndex, &ehci->port_c_suspend))
938 status |= USB_PORT_STAT_C_SUSPEND << 16;
940 #ifndef VERBOSE_DEBUG
941 if (status & ~0xffff) /* only if wPortChange is interesting */
942 #endif
943 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
944 put_unaligned_le32(status, buf);
945 break;
946 case SetHubFeature:
947 switch (wValue) {
948 case C_HUB_LOCAL_POWER:
949 case C_HUB_OVER_CURRENT:
950 /* no hub-wide feature/status flags */
951 break;
952 default:
953 goto error;
955 break;
956 case SetPortFeature:
957 selector = wIndex >> 8;
958 wIndex &= 0xff;
959 if (unlikely(ehci->debug)) {
960 /* If the debug port is active any port
961 * feature requests should get denied */
962 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
963 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
964 retval = -ENODEV;
965 goto error_exit;
968 if (!wIndex || wIndex > ports)
969 goto error;
970 wIndex--;
971 temp = ehci_readl(ehci, status_reg);
972 if (temp & PORT_OWNER)
973 break;
975 temp &= ~PORT_RWC_BITS;
976 switch (wValue) {
977 case USB_PORT_FEAT_SUSPEND:
978 if (ehci->no_selective_suspend)
979 break;
980 if ((temp & PORT_PE) == 0
981 || (temp & PORT_RESET) != 0)
982 goto error;
984 /* After above check the port must be connected.
985 * Set appropriate bit thus could put phy into low power
986 * mode if we have hostpc feature
988 temp &= ~PORT_WKCONN_E;
989 temp |= PORT_WKDISC_E | PORT_WKOC_E;
990 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
991 if (hostpc_reg) {
992 spin_unlock_irqrestore(&ehci->lock, flags);
993 msleep(5);/* 5ms for HCD enter low pwr mode */
994 spin_lock_irqsave(&ehci->lock, flags);
995 temp1 = ehci_readl(ehci, hostpc_reg);
996 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
997 hostpc_reg);
998 temp1 = ehci_readl(ehci, hostpc_reg);
999 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
1000 wIndex, (temp1 & HOSTPC_PHCD) ?
1001 "succeeded" : "failed");
1003 set_bit(wIndex, &ehci->suspended_ports);
1004 break;
1005 case USB_PORT_FEAT_POWER:
1006 if (HCS_PPC (ehci->hcs_params))
1007 ehci_writel(ehci, temp | PORT_POWER,
1008 status_reg);
1009 break;
1010 case USB_PORT_FEAT_RESET:
1011 if (temp & PORT_RESUME)
1012 goto error;
1013 /* line status bits may report this as low speed,
1014 * which can be fine if this root hub has a
1015 * transaction translator built in.
1017 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1018 && !ehci_is_TDI(ehci)
1019 && PORT_USB11 (temp)) {
1020 ehci_dbg (ehci,
1021 "port %d low speed --> companion\n",
1022 wIndex + 1);
1023 temp |= PORT_OWNER;
1024 } else {
1025 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
1026 temp |= PORT_RESET;
1027 temp &= ~PORT_PE;
1030 * caller must wait, then call GetPortStatus
1031 * usb 2.0 spec says 50 ms resets on root
1033 ehci->reset_done [wIndex] = jiffies
1034 + msecs_to_jiffies (50);
1036 ehci_writel(ehci, temp, status_reg);
1037 break;
1039 /* For downstream facing ports (these): one hub port is put
1040 * into test mode according to USB2 11.24.2.13, then the hub
1041 * must be reset (which for root hub now means rmmod+modprobe,
1042 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1043 * about the EHCI-specific stuff.
1045 case USB_PORT_FEAT_TEST:
1046 if (!selector || selector > 5)
1047 goto error;
1048 ehci_quiesce(ehci);
1050 /* Put all enabled ports into suspend */
1051 while (ports--) {
1052 u32 __iomem *sreg =
1053 &ehci->regs->port_status[ports];
1055 temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
1056 if (temp & PORT_PE)
1057 ehci_writel(ehci, temp | PORT_SUSPEND,
1058 sreg);
1060 ehci_halt(ehci);
1061 temp = ehci_readl(ehci, status_reg);
1062 temp |= selector << 16;
1063 ehci_writel(ehci, temp, status_reg);
1064 break;
1066 default:
1067 goto error;
1069 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
1070 break;
1072 default:
1073 error:
1074 /* "stall" on error */
1075 retval = -EPIPE;
1077 error_exit:
1078 spin_unlock_irqrestore (&ehci->lock, flags);
1079 return retval;
1082 static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
1084 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1086 if (ehci_is_TDI(ehci))
1087 return;
1088 set_owner(ehci, --portnum, PORT_OWNER);
1091 static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
1093 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1094 u32 __iomem *reg;
1096 if (ehci_is_TDI(ehci))
1097 return 0;
1098 reg = &ehci->regs->port_status[portnum - 1];
1099 return ehci_readl(ehci, reg) & PORT_OWNER;