?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / usb / serial / cp210x.c
blobfd67cc53545bcdfcb37772e6536f6f884bd711fc
1 /*
2 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
3 *
4 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License version
8 * 2 as published by the Free Software Foundation.
9 *
10 * Support to set flow control line levels using TIOCMGET and TIOCMSET
11 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
12 * control thanks to Munir Nassar nassarmu@real-time.com
13 *
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/tty.h>
20 #include <linux/tty_flip.h>
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/usb.h>
24 #include <linux/uaccess.h>
25 #include <linux/usb/serial.h>
26
27 /*
28 * Version Information
29 */
30 #define DRIVER_VERSION "v0.09"
31 #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
32
33 /*
34 * Function Prototypes
35 */
36 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
37 static void cp210x_close(struct usb_serial_port *);
38 static void cp210x_get_termios(struct tty_struct *,
39 struct usb_serial_port *port);
40 static void cp210x_get_termios_port(struct usb_serial_port *port,
41 unsigned int *cflagp, unsigned int *baudp);
42 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
43 struct ktermios*);
44 static int cp210x_tiocmget(struct tty_struct *);
45 static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
46 static int cp210x_tiocmset_port(struct usb_serial_port *port,
47 unsigned int, unsigned int);
48 static void cp210x_break_ctl(struct tty_struct *, int);
49 static int cp210x_startup(struct usb_serial *);
50 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
51
52 static int debug;
53
54 static const struct usb_device_id id_table[] = {
55 { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
56 { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
57 { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
58 { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
59 { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
60 { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
61 { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
62 { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
63 { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
64 { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
65 { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
66 { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
67 { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
68 { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
69 { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
70 { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
71 { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
72 { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
73 { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
74 { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
75 { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
76 { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
77 { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
78 { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
79 { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
80 { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
81 { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
82 { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
83 { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
84 { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
85 { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
86 { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
87 { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
88 { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
89 { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
90 { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
91 { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
92 { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
93 { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
94 { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
95 { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
96 { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
97 { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
98 { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
99 { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
100 { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
101 { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
102 { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
103 { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
104 { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
105 { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
106 { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
107 { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
108 { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
109 { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
110 { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
111 { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
112 { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
113 { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
114 { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
115 { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
116 { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
117 { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
118 { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
119 { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
120 { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
121 { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
122 { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
123 { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
124 { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
125 { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
126 { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
127 { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
128 { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
129 { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
130 { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
131 { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
132 { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
133 { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
134 { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
135 { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
136 { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
137 { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
138 { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
139 { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
140 { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
141 { } /* Terminating Entry */
142 };
143
144 MODULE_DEVICE_TABLE(usb, id_table);
145
146 static struct usb_driver cp210x_driver = {
147 .name = "cp210x",
148 .probe = usb_serial_probe,
149 .disconnect = usb_serial_disconnect,
150 .id_table = id_table,
151 .no_dynamic_id = 1,
152 };
153
154 static struct usb_serial_driver cp210x_device = {
155 .driver = {
156 .owner = THIS_MODULE,
157 .name = "cp210x",
158 },
159 .usb_driver = &cp210x_driver,
160 .id_table = id_table,
161 .num_ports = 1,
162 .bulk_in_size = 256,
163 .bulk_out_size = 256,
164 .open = cp210x_open,
165 .close = cp210x_close,
166 .break_ctl = cp210x_break_ctl,
167 .set_termios = cp210x_set_termios,
168 .tiocmget = cp210x_tiocmget,
169 .tiocmset = cp210x_tiocmset,
170 .attach = cp210x_startup,
171 .dtr_rts = cp210x_dtr_rts
172 };
173
174 /* Config request types */
175 #define REQTYPE_HOST_TO_DEVICE 0x41
176 #define REQTYPE_DEVICE_TO_HOST 0xc1
177
178 /* Config request codes */
179 #define CP210X_IFC_ENABLE 0x00
180 #define CP210X_SET_BAUDDIV 0x01
181 #define CP210X_GET_BAUDDIV 0x02
182 #define CP210X_SET_LINE_CTL 0x03
183 #define CP210X_GET_LINE_CTL 0x04
184 #define CP210X_SET_BREAK 0x05
185 #define CP210X_IMM_CHAR 0x06
186 #define CP210X_SET_MHS 0x07
187 #define CP210X_GET_MDMSTS 0x08
188 #define CP210X_SET_XON 0x09
189 #define CP210X_SET_XOFF 0x0A
190 #define CP210X_SET_EVENTMASK 0x0B
191 #define CP210X_GET_EVENTMASK 0x0C
192 #define CP210X_SET_CHAR 0x0D
193 #define CP210X_GET_CHARS 0x0E
194 #define CP210X_GET_PROPS 0x0F
195 #define CP210X_GET_COMM_STATUS 0x10
196 #define CP210X_RESET 0x11
197 #define CP210X_PURGE 0x12
198 #define CP210X_SET_FLOW 0x13
199 #define CP210X_GET_FLOW 0x14
200 #define CP210X_EMBED_EVENTS 0x15
201 #define CP210X_GET_EVENTSTATE 0x16
202 #define CP210X_SET_CHARS 0x19
203
204 /* CP210X_IFC_ENABLE */
205 #define UART_ENABLE 0x0001
206 #define UART_DISABLE 0x0000
207
208 /* CP210X_(SET|GET)_BAUDDIV */
209 #define BAUD_RATE_GEN_FREQ 0x384000
210
211 /* CP210X_(SET|GET)_LINE_CTL */
212 #define BITS_DATA_MASK 0X0f00
213 #define BITS_DATA_5 0X0500
214 #define BITS_DATA_6 0X0600
215 #define BITS_DATA_7 0X0700
216 #define BITS_DATA_8 0X0800
217 #define BITS_DATA_9 0X0900
218
219 #define BITS_PARITY_MASK 0x00f0
220 #define BITS_PARITY_NONE 0x0000
221 #define BITS_PARITY_ODD 0x0010
222 #define BITS_PARITY_EVEN 0x0020
223 #define BITS_PARITY_MARK 0x0030
224 #define BITS_PARITY_SPACE 0x0040
225
226 #define BITS_STOP_MASK 0x000f
227 #define BITS_STOP_1 0x0000
228 #define BITS_STOP_1_5 0x0001
229 #define BITS_STOP_2 0x0002
230
231 /* CP210X_SET_BREAK */
232 #define BREAK_ON 0x0001
233 #define BREAK_OFF 0x0000
234
235 /* CP210X_(SET_MHS|GET_MDMSTS) */
236 #define CONTROL_DTR 0x0001
237 #define CONTROL_RTS 0x0002
238 #define CONTROL_CTS 0x0010
239 #define CONTROL_DSR 0x0020
240 #define CONTROL_RING 0x0040
241 #define CONTROL_DCD 0x0080
242 #define CONTROL_WRITE_DTR 0x0100
243 #define CONTROL_WRITE_RTS 0x0200
244
245 /*
246 * cp210x_get_config
247 * Reads from the CP210x configuration registers
248 * 'size' is specified in bytes.
249 * 'data' is a pointer to a pre-allocated array of integers large
250 * enough to hold 'size' bytes (with 4 bytes to each integer)
251 */
252 static int cp210x_get_config(struct usb_serial_port *port, u8 request,
253 unsigned int *data, int size)
254 {
255 struct usb_serial *serial = port->serial;
256 __le32 *buf;
257 int result, i, length;
258
259 /* Number of integers required to contain the array */
260 length = (((size - 1) | 3) + 1)/4;
261
262 buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
263 if (!buf) {
264 dev_err(&port->dev, "%s - out of memory.\n", __func__);
265 return -ENOMEM;
266 }
267
268 /* Issue the request, attempting to read 'size' bytes */
269 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
270 request, REQTYPE_DEVICE_TO_HOST, 0x0000,
271 0, buf, size, 300);
272
273 /* Convert data into an array of integers */
274 for (i = 0; i < length; i++)
275 data[i] = le32_to_cpu(buf[i]);
276
277 kfree(buf);
278
279 if (result != size) {
280 dbg("%s - Unable to send config request, "
281 "request=0x%x size=%d result=%d\n",
282 __func__, request, size, result);
283 return -EPROTO;
284 }
285
286 return 0;
287 }
288
289 /*
290 * cp210x_set_config
291 * Writes to the CP210x configuration registers
292 * Values less than 16 bits wide are sent directly
293 * 'size' is specified in bytes.
294 */
295 static int cp210x_set_config(struct usb_serial_port *port, u8 request,
296 unsigned int *data, int size)
297 {
298 struct usb_serial *serial = port->serial;
299 __le32 *buf;
300 int result, i, length;
301
302 /* Number of integers required to contain the array */
303 length = (((size - 1) | 3) + 1)/4;
304
305 buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
306 if (!buf) {
307 dev_err(&port->dev, "%s - out of memory.\n",
308 __func__);
309 return -ENOMEM;
310 }
311
312 /* Array of integers into bytes */
313 for (i = 0; i < length; i++)
314 buf[i] = cpu_to_le32(data[i]);
315
316 if (size > 2) {
317 result = usb_control_msg(serial->dev,
318 usb_sndctrlpipe(serial->dev, 0),
319 request, REQTYPE_HOST_TO_DEVICE, 0x0000,
320 0, buf, size, 300);
321 } else {
322 result = usb_control_msg(serial->dev,
323 usb_sndctrlpipe(serial->dev, 0),
324 request, REQTYPE_HOST_TO_DEVICE, data[0],
325 0, NULL, 0, 300);
326 }
327
328 kfree(buf);
329
330 if ((size > 2 && result != size) || result < 0) {
331 dbg("%s - Unable to send request, "
332 "request=0x%x size=%d result=%d\n",
333 __func__, request, size, result);
334 return -EPROTO;
335 }
336
337 return 0;
338 }
339
340 /*
341 * cp210x_set_config_single
342 * Convenience function for calling cp210x_set_config on single data values
343 * without requiring an integer pointer
344 */
345 static inline int cp210x_set_config_single(struct usb_serial_port *port,
346 u8 request, unsigned int data)
347 {
348 return cp210x_set_config(port, request, &data, 2);
349 }
350
351 /*
352 * cp210x_quantise_baudrate
353 * Quantises the baud rate as per AN205 Table 1
354 */
355 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
356 if (baud <= 56) baud = 0;
357 else if (baud <= 300) baud = 300;
358 else if (baud <= 600) baud = 600;
359 else if (baud <= 1200) baud = 1200;
360 else if (baud <= 1800) baud = 1800;
361 else if (baud <= 2400) baud = 2400;
362 else if (baud <= 4000) baud = 4000;
363 else if (baud <= 4803) baud = 4800;
364 else if (baud <= 7207) baud = 7200;
365 else if (baud <= 9612) baud = 9600;
366 else if (baud <= 14428) baud = 14400;
367 else if (baud <= 16062) baud = 16000;
368 else if (baud <= 19250) baud = 19200;
369 else if (baud <= 28912) baud = 28800;
370 else if (baud <= 38601) baud = 38400;
371 else if (baud <= 51558) baud = 51200;
372 else if (baud <= 56280) baud = 56000;
373 else if (baud <= 58053) baud = 57600;
374 else if (baud <= 64111) baud = 64000;
375 else if (baud <= 77608) baud = 76800;
376 else if (baud <= 117028) baud = 115200;
377 else if (baud <= 129347) baud = 128000;
378 else if (baud <= 156868) baud = 153600;
379 else if (baud <= 237832) baud = 230400;
380 else if (baud <= 254234) baud = 250000;
381 else if (baud <= 273066) baud = 256000;
382 else if (baud <= 491520) baud = 460800;
383 else if (baud <= 567138) baud = 500000;
384 else if (baud <= 670254) baud = 576000;
385 else if (baud <= 1053257) baud = 921600;
386 else if (baud <= 1474560) baud = 1228800;
387 else if (baud <= 2457600) baud = 1843200;
388 else baud = 3686400;
389 return baud;
390 }
391
392 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
393 {
394 int result;
395
396 dbg("%s - port %d", __func__, port->number);
397
398 if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
399 dev_err(&port->dev, "%s - Unable to enable UART\n",
400 __func__);
401 return -EPROTO;
402 }
403
404 result = usb_serial_generic_open(tty, port);
405 if (result)
406 return result;
407
408 /* Configure the termios structure */
409 cp210x_get_termios(tty, port);
410 return 0;
411 }
412
413 static void cp210x_close(struct usb_serial_port *port)
414 {
415 dbg("%s - port %d", __func__, port->number);
416
417 usb_serial_generic_close(port);
418
419 mutex_lock(&port->serial->disc_mutex);
420 if (!port->serial->disconnected)
421 cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
422 mutex_unlock(&port->serial->disc_mutex);
423 }
424
425 /*
426 * cp210x_get_termios
427 * Reads the baud rate, data bits, parity, stop bits and flow control mode
428 * from the device, corrects any unsupported values, and configures the
429 * termios structure to reflect the state of the device
430 */
431 static void cp210x_get_termios(struct tty_struct *tty,
432 struct usb_serial_port *port)
433 {
434 unsigned int baud;
435
436 if (tty) {
437 cp210x_get_termios_port(tty->driver_data,
438 &tty->termios->c_cflag, &baud);
439 tty_encode_baud_rate(tty, baud, baud);
440 }
441
442 else {
443 unsigned int cflag;
444 cflag = 0;
445 cp210x_get_termios_port(port, &cflag, &baud);
446 }
447 }
448
449 /*
450 * cp210x_get_termios_port
451 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
452 */
453 static void cp210x_get_termios_port(struct usb_serial_port *port,
454 unsigned int *cflagp, unsigned int *baudp)
455 {
456 unsigned int cflag, modem_ctl[4];
457 unsigned int baud;
458 unsigned int bits;
459
460 dbg("%s - port %d", __func__, port->number);
461
462 cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
463 /* Convert to baudrate */
464 if (baud)
465 baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
466
467 dbg("%s - baud rate = %d", __func__, baud);
468 *baudp = baud;
469
470 cflag = *cflagp;
471
472 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
473 cflag &= ~CSIZE;
474 switch (bits & BITS_DATA_MASK) {
475 case BITS_DATA_5:
476 dbg("%s - data bits = 5", __func__);
477 cflag |= CS5;
478 break;
479 case BITS_DATA_6:
480 dbg("%s - data bits = 6", __func__);
481 cflag |= CS6;
482 break;
483 case BITS_DATA_7:
484 dbg("%s - data bits = 7", __func__);
485 cflag |= CS7;
486 break;
487 case BITS_DATA_8:
488 dbg("%s - data bits = 8", __func__);
489 cflag |= CS8;
490 break;
491 case BITS_DATA_9:
492 dbg("%s - data bits = 9 (not supported, using 8 data bits)",
493 __func__);
494 cflag |= CS8;
495 bits &= ~BITS_DATA_MASK;
496 bits |= BITS_DATA_8;
497 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
498 break;
499 default:
500 dbg("%s - Unknown number of data bits, using 8", __func__);
501 cflag |= CS8;
502 bits &= ~BITS_DATA_MASK;
503 bits |= BITS_DATA_8;
504 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
505 break;
506 }
507
508 switch (bits & BITS_PARITY_MASK) {
509 case BITS_PARITY_NONE:
510 dbg("%s - parity = NONE", __func__);
511 cflag &= ~PARENB;
512 break;
513 case BITS_PARITY_ODD:
514 dbg("%s - parity = ODD", __func__);
515 cflag |= (PARENB|PARODD);
516 break;
517 case BITS_PARITY_EVEN:
518 dbg("%s - parity = EVEN", __func__);
519 cflag &= ~PARODD;
520 cflag |= PARENB;
521 break;
522 case BITS_PARITY_MARK:
523 dbg("%s - parity = MARK (not supported, disabling parity)",
524 __func__);
525 cflag &= ~PARENB;
526 bits &= ~BITS_PARITY_MASK;
527 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
528 break;
529 case BITS_PARITY_SPACE:
530 dbg("%s - parity = SPACE (not supported, disabling parity)",
531 __func__);
532 cflag &= ~PARENB;
533 bits &= ~BITS_PARITY_MASK;
534 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
535 break;
536 default:
537 dbg("%s - Unknown parity mode, disabling parity", __func__);
538 cflag &= ~PARENB;
539 bits &= ~BITS_PARITY_MASK;
540 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
541 break;
542 }
543
544 cflag &= ~CSTOPB;
545 switch (bits & BITS_STOP_MASK) {
546 case BITS_STOP_1:
547 dbg("%s - stop bits = 1", __func__);
548 break;
549 case BITS_STOP_1_5:
550 dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
551 __func__);
552 bits &= ~BITS_STOP_MASK;
553 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
554 break;
555 case BITS_STOP_2:
556 dbg("%s - stop bits = 2", __func__);
557 cflag |= CSTOPB;
558 break;
559 default:
560 dbg("%s - Unknown number of stop bits, using 1 stop bit",
561 __func__);
562 bits &= ~BITS_STOP_MASK;
563 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
564 break;
565 }
566
567 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
568 if (modem_ctl[0] & 0x0008) {
569 dbg("%s - flow control = CRTSCTS", __func__);
570 cflag |= CRTSCTS;
571 } else {
572 dbg("%s - flow control = NONE", __func__);
573 cflag &= ~CRTSCTS;
574 }
575
576 *cflagp = cflag;
577 }
578
579 static void cp210x_set_termios(struct tty_struct *tty,
580 struct usb_serial_port *port, struct ktermios *old_termios)
581 {
582 unsigned int cflag, old_cflag;
583 unsigned int baud = 0, bits;
584 unsigned int modem_ctl[4];
585
586 dbg("%s - port %d", __func__, port->number);
587
588 if (!tty)
589 return;
590
591 tty->termios->c_cflag &= ~CMSPAR;
592 cflag = tty->termios->c_cflag;
593 old_cflag = old_termios->c_cflag;
594 baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
595
596 /* If the baud rate is to be updated*/
597 if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
598 dbg("%s - Setting baud rate to %d baud", __func__,
599 baud);
600 if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
601 ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
602 dbg("Baud rate requested not supported by device");
603 baud = tty_termios_baud_rate(old_termios);
604 }
605 }
606 /* Report back the resulting baud rate */
607 tty_encode_baud_rate(tty, baud, baud);
608
609 /* If the number of data bits is to be updated */
610 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
611 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
612 bits &= ~BITS_DATA_MASK;
613 switch (cflag & CSIZE) {
614 case CS5:
615 bits |= BITS_DATA_5;
616 dbg("%s - data bits = 5", __func__);
617 break;
618 case CS6:
619 bits |= BITS_DATA_6;
620 dbg("%s - data bits = 6", __func__);
621 break;
622 case CS7:
623 bits |= BITS_DATA_7;
624 dbg("%s - data bits = 7", __func__);
625 break;
626 case CS8:
627 bits |= BITS_DATA_8;
628 dbg("%s - data bits = 8", __func__);
629 break;
630 /*case CS9:
631 bits |= BITS_DATA_9;
632 dbg("%s - data bits = 9", __func__);
633 break;*/
634 default:
635 dbg("cp210x driver does not "
636 "support the number of bits requested,"
637 " using 8 bit mode\n");
638 bits |= BITS_DATA_8;
639 break;
640 }
641 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
642 dbg("Number of data bits requested "
643 "not supported by device\n");
644 }
645
646 if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
647 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
648 bits &= ~BITS_PARITY_MASK;
649 if (cflag & PARENB) {
650 if (cflag & PARODD) {
651 bits |= BITS_PARITY_ODD;
652 dbg("%s - parity = ODD", __func__);
653 } else {
654 bits |= BITS_PARITY_EVEN;
655 dbg("%s - parity = EVEN", __func__);
656 }
657 }
658 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
659 dbg("Parity mode not supported "
660 "by device\n");
661 }
662
663 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
664 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
665 bits &= ~BITS_STOP_MASK;
666 if (cflag & CSTOPB) {
667 bits |= BITS_STOP_2;
668 dbg("%s - stop bits = 2", __func__);
669 } else {
670 bits |= BITS_STOP_1;
671 dbg("%s - stop bits = 1", __func__);
672 }
673 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
674 dbg("Number of stop bits requested "
675 "not supported by device\n");
676 }
677
678 if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
679 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
680 dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
681 __func__, modem_ctl[0], modem_ctl[1],
682 modem_ctl[2], modem_ctl[3]);
683
684 if (cflag & CRTSCTS) {
685 modem_ctl[0] &= ~0x7B;
686 modem_ctl[0] |= 0x09;
687 modem_ctl[1] = 0x80;
688 dbg("%s - flow control = CRTSCTS", __func__);
689 } else {
690 modem_ctl[0] &= ~0x7B;
691 modem_ctl[0] |= 0x01;
692 modem_ctl[1] |= 0x40;
693 dbg("%s - flow control = NONE", __func__);
694 }
695
696 dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
697 __func__, modem_ctl[0], modem_ctl[1],
698 modem_ctl[2], modem_ctl[3]);
699 cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
700 }
701
702 }
703
704 static int cp210x_tiocmset (struct tty_struct *tty,
705 unsigned int set, unsigned int clear)
706 {
707 struct usb_serial_port *port = tty->driver_data;
708 return cp210x_tiocmset_port(port, set, clear);
709 }
710
711 static int cp210x_tiocmset_port(struct usb_serial_port *port,
712 unsigned int set, unsigned int clear)
713 {
714 unsigned int control = 0;
715
716 dbg("%s - port %d", __func__, port->number);
717
718 if (set & TIOCM_RTS) {
719 control |= CONTROL_RTS;
720 control |= CONTROL_WRITE_RTS;
721 }
722 if (set & TIOCM_DTR) {
723 control |= CONTROL_DTR;
724 control |= CONTROL_WRITE_DTR;
725 }
726 if (clear & TIOCM_RTS) {
727 control &= ~CONTROL_RTS;
728 control |= CONTROL_WRITE_RTS;
729 }
730 if (clear & TIOCM_DTR) {
731 control &= ~CONTROL_DTR;
732 control |= CONTROL_WRITE_DTR;
733 }
734
735 dbg("%s - control = 0x%.4x", __func__, control);
736
737 return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
738 }
739
740 static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
741 {
742 if (on)
743 cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
744 else
745 cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
746 }
747
748 static int cp210x_tiocmget (struct tty_struct *tty)
749 {
750 struct usb_serial_port *port = tty->driver_data;
751 unsigned int control;
752 int result;
753
754 dbg("%s - port %d", __func__, port->number);
755
756 cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
757
758 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
759 |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
760 |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
761 |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
762 |((control & CONTROL_RING)? TIOCM_RI : 0)
763 |((control & CONTROL_DCD) ? TIOCM_CD : 0);
764
765 dbg("%s - control = 0x%.2x", __func__, control);
766
767 return result;
768 }
769
770 static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
771 {
772 struct usb_serial_port *port = tty->driver_data;
773 unsigned int state;
774
775 dbg("%s - port %d", __func__, port->number);
776 if (break_state == 0)
777 state = BREAK_OFF;
778 else
779 state = BREAK_ON;
780 dbg("%s - turning break %s", __func__,
781 state == BREAK_OFF ? "off" : "on");
782 cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
783 }
784
785 static int cp210x_startup(struct usb_serial *serial)
786 {
787 /* cp210x buffers behave strangely unless device is reset */
788 usb_reset_device(serial->dev);
789 return 0;
790 }
791
792 static int __init cp210x_init(void)
793 {
794 int retval;
795
796 retval = usb_serial_register(&cp210x_device);
797 if (retval)
798 return retval; /* Failed to register */
799
800 retval = usb_register(&cp210x_driver);
801 if (retval) {
802 /* Failed to register */
803 usb_serial_deregister(&cp210x_device);
804 return retval;
805 }
806
807 /* Success */
808 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
809 DRIVER_DESC "\n");
810 return 0;
811 }
812
813 static void __exit cp210x_exit(void)
814 {
815 usb_deregister(&cp210x_driver);
816 usb_serial_deregister(&cp210x_device);
817 }
818
819 module_init(cp210x_init);
820 module_exit(cp210x_exit);
821
822 MODULE_DESCRIPTION(DRIVER_DESC);
823 MODULE_VERSION(DRIVER_VERSION);
824 MODULE_LICENSE("GPL");
825
826 module_param(debug, bool, S_IRUGO | S_IWUSR);
827 MODULE_PARM_DESC(debug, "Enable verbose debugging messages");
linux-next