include: replace linux/module.h with "struct module" wherever possible
[linux-2.6/next.git] / drivers / usb / serial / ftdi_sio.c
blob78a2cf9551cc725d220c76b13420dcd21fc78716
1 /*
2 * USB FTDI SIO driver
4 * Copyright (C) 2009 - 2010
5 * Johan Hovold (jhovold@gmail.com)
6 * Copyright (C) 1999 - 2001
7 * Greg Kroah-Hartman (greg@kroah.com)
8 * Bill Ryder (bryder@sgi.com)
9 * Copyright (C) 2002
10 * Kuba Ober (kuba@mareimbrium.org)
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * See Documentation/usb/usb-serial.txt for more information on using this
18 * driver
20 * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
21 * and extra documentation
23 * Change entries from 2004 and earlier can be found in versions of this
24 * file in kernel versions prior to the 2.6.24 release.
28 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
29 /* Thanx to FTDI for so kindly providing details of the protocol required */
30 /* to talk to the device */
31 /* Thanx to gkh and the rest of the usb dev group for all code I have
32 assimilated :-) */
34 #include <linux/kernel.h>
35 #include <linux/errno.h>
36 #include <linux/init.h>
37 #include <linux/slab.h>
38 #include <linux/tty.h>
39 #include <linux/tty_driver.h>
40 #include <linux/tty_flip.h>
41 #include <linux/module.h>
42 #include <linux/spinlock.h>
43 #include <linux/mutex.h>
44 #include <linux/uaccess.h>
45 #include <linux/usb.h>
46 #include <linux/serial.h>
47 #include <linux/usb/serial.h>
48 #include "ftdi_sio.h"
49 #include "ftdi_sio_ids.h"
52 * Version Information
54 #define DRIVER_VERSION "v1.6.0"
55 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
56 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
58 static int debug;
59 static __u16 vendor = FTDI_VID;
60 static __u16 product;
62 struct ftdi_private {
63 struct kref kref;
64 enum ftdi_chip_type chip_type;
65 /* type of device, either SIO or FT8U232AM */
66 int baud_base; /* baud base clock for divisor setting */
67 int custom_divisor; /* custom_divisor kludge, this is for
68 baud_base (different from what goes to the
69 chip!) */
70 __u16 last_set_data_urb_value ;
71 /* the last data state set - needed for doing
72 * a break
74 int flags; /* some ASYNC_xxxx flags are supported */
75 unsigned long last_dtr_rts; /* saved modem control outputs */
76 wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
77 char prev_status, diff_status; /* Used for TIOCMIWAIT */
78 char transmit_empty; /* If transmitter is empty or not */
79 struct usb_serial_port *port;
80 __u16 interface; /* FT2232C, FT2232H or FT4232H port interface
81 (0 for FT232/245) */
83 speed_t force_baud; /* if non-zero, force the baud rate to
84 this value */
85 int force_rtscts; /* if non-zero, force RTS-CTS to always
86 be enabled */
88 unsigned int latency; /* latency setting in use */
89 unsigned short max_packet_size;
90 struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
93 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
94 struct ftdi_sio_quirk {
95 int (*probe)(struct usb_serial *);
96 /* Special settings for probed ports. */
97 void (*port_probe)(struct ftdi_private *);
100 static int ftdi_jtag_probe(struct usb_serial *serial);
101 static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
102 static int ftdi_NDI_device_setup(struct usb_serial *serial);
103 static int ftdi_stmclite_probe(struct usb_serial *serial);
104 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
105 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
107 static struct ftdi_sio_quirk ftdi_jtag_quirk = {
108 .probe = ftdi_jtag_probe,
111 static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
112 .probe = ftdi_mtxorb_hack_setup,
115 static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
116 .probe = ftdi_NDI_device_setup,
119 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
120 .port_probe = ftdi_USB_UIRT_setup,
123 static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
124 .port_probe = ftdi_HE_TIRA1_setup,
127 static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
128 .probe = ftdi_stmclite_probe,
132 * The 8U232AM has the same API as the sio except for:
133 * - it can support MUCH higher baudrates; up to:
134 * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
135 * o 230400 at 12MHz
136 * so .. 8U232AM's baudrate setting codes are different
137 * - it has a two byte status code.
138 * - it returns characters every 16ms (the FTDI does it every 40ms)
140 * the bcdDevice value is used to differentiate FT232BM and FT245BM from
141 * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
142 * combinations in both tables.
143 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
144 * but I don't know if those ever went into mass production. [Ian Abbott]
150 * Device ID not listed? Test via module params product/vendor or
151 * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
153 static struct usb_device_id id_table_combined [] = {
154 { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
155 { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
156 { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
157 { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
158 { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
159 { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
160 { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
161 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
162 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
163 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
164 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
165 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
166 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
167 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
168 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
169 { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
170 { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
171 { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
172 { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
173 { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
174 { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
175 { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
176 { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
177 { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
178 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
179 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
180 { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
181 { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
182 { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
183 { USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
184 { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
185 { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
186 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
187 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
188 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
189 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
190 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
191 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
192 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
193 { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
194 { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
195 { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
196 { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
197 { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
198 { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
199 { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
200 { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
201 { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
202 { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
203 { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
204 { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
205 { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
206 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
207 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
208 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
209 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
210 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
211 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
212 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
213 { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
214 { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
215 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
216 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
217 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
218 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
219 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
220 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
221 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
222 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
223 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
224 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
225 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
226 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
227 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
228 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
229 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
230 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
231 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
232 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
233 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
234 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
235 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
236 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
237 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
238 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
239 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
240 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
241 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
242 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
243 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
244 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
245 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
246 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
247 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
248 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
249 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
250 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
251 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
252 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
253 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
254 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
255 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
256 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
257 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
258 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
259 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
260 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
261 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
262 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
263 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
264 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
265 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
266 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
267 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
268 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
269 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
270 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
271 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
272 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
273 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
274 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
275 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
276 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
277 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
278 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
279 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
280 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
281 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
282 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
283 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
284 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
285 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
286 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
287 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
288 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
289 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
290 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
291 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
292 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
293 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
294 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
295 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
296 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
297 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
298 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
299 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
300 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
301 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
302 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
303 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
304 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
305 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
306 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
307 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
308 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
309 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
310 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
311 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
312 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
313 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
314 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
315 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
316 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
317 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
318 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
319 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
320 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
321 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
322 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
323 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
324 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
325 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
326 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
327 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
328 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
329 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
330 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
331 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
332 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
333 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
334 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
335 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
336 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
337 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
338 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
339 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
340 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
341 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
342 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
343 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
344 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
345 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
346 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
347 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
348 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
349 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
350 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
351 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
352 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
353 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
354 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
355 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
356 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
357 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
358 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
359 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
360 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
361 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
362 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
363 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
364 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
365 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
366 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
367 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
368 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
369 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
370 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
371 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
372 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
373 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
374 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
375 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
376 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
377 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
378 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
379 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
380 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
381 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
382 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
383 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
384 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
385 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
386 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
387 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
388 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
389 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
390 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
391 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
392 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
393 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
394 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
395 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
396 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
397 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
398 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
399 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
400 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
401 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
402 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
403 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
404 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
405 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
406 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
407 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
408 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
409 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
410 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
411 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
412 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
413 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
414 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
415 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
416 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
417 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
418 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
419 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
420 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
421 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
422 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
423 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
424 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
425 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
426 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
427 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
428 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
429 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
430 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
431 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
432 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
433 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
434 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
435 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
436 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
437 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
438 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
439 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
440 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
441 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
442 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
443 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
444 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
445 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
446 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
447 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
448 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
449 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
450 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
451 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
452 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
453 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
454 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
455 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
456 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
457 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
458 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
459 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
460 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
461 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
462 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
463 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
464 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
465 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
466 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
467 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
468 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
469 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
470 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
471 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
472 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
473 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
474 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
475 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
476 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
477 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
478 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
479 { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
480 { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
481 { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
482 { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
483 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
484 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
485 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
486 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
487 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
488 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
489 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
490 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
491 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
492 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
493 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
494 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
495 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
496 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
497 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
498 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
499 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
500 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
501 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
502 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
503 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
504 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
505 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
506 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
507 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
508 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
509 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
510 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
511 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
512 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
513 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
514 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
515 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
516 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
517 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
518 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
519 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
520 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
521 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
522 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
523 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
524 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
525 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
526 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
527 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
528 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
529 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
530 { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
531 { USB_DEVICE(OCT_VID, OCT_US101_PID) },
532 { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
533 { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
534 .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
535 { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
536 .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
537 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
538 { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
539 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
540 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
541 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
542 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
543 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
544 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
545 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
546 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
547 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
548 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
549 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
550 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
551 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
552 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
553 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
554 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
555 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
556 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
557 { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
558 { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
559 { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
560 { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
561 { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
562 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
563 { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
564 { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
565 { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
566 { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
567 { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
568 { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
569 { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
570 { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
571 { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
573 * ELV devices:
575 { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
576 { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
577 { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
578 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
579 { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
580 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
581 { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
582 { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
583 { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
584 { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
585 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
586 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
587 { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
588 { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
589 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
590 { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
591 { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
592 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
593 { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
594 { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
595 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
596 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
597 { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
598 { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
599 { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
600 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
601 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
602 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
603 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
604 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
605 { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
606 { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
607 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
608 { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
609 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
610 { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
611 { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
612 { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
613 { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
614 { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
615 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
616 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
617 { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
618 { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
619 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
620 { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
621 { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
622 { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
623 { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
624 { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
625 { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
626 { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
627 { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
628 { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
629 { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
630 { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
631 { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
632 { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
633 { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
634 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
635 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
636 { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
637 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
638 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
639 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
640 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
641 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
642 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
643 { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
644 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
645 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
646 { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
647 { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
648 { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
649 { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
650 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
651 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
652 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
653 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
654 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
655 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
656 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
657 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
658 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
659 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
660 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
661 { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
662 { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
663 { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
664 { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
665 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
666 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
667 { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
668 { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
669 { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
670 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
671 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
672 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
673 { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
674 { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
675 { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
676 { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
677 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
678 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
679 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
680 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
681 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
682 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
683 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
684 { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
685 { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
686 { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
687 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
688 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
689 { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
690 { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
691 { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
692 { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
693 { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
694 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
695 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
696 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
697 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
698 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
699 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
700 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
701 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
702 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
703 { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
704 { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
705 { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
706 { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
707 { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
708 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
709 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
710 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
711 { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
712 { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
713 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
714 { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
715 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
716 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
717 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
718 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
719 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
720 { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
721 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
722 { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
723 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
724 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
725 { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
726 { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
727 { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
728 { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
729 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
730 { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
731 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
732 { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
733 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
734 { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
735 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
736 { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
737 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
738 { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
739 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
740 { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
741 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
742 { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
743 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
744 { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
745 { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
747 /* Papouch devices based on FTDI chip */
748 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
749 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
750 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
751 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
752 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
753 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
754 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
755 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
756 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
757 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
758 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
759 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
760 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
761 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
762 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
763 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
764 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
765 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
766 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
767 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
768 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
769 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
770 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
771 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
772 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
773 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
774 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
775 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
777 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
778 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
779 { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
780 { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
781 { USB_DEVICE(ATMEL_VID, STK541_PID) },
782 { USB_DEVICE(DE_VID, STB_PID) },
783 { USB_DEVICE(DE_VID, WHT_PID) },
784 { USB_DEVICE(ADI_VID, ADI_GNICE_PID),
785 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
786 { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
787 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
788 { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
789 { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
790 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
791 { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
792 { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
793 { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
794 { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
795 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
796 { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
797 { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
798 { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
799 { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
800 { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
801 { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
802 { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
803 { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
804 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
805 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
806 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
807 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
808 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
809 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
810 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
811 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
812 { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
813 { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
814 { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
815 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
816 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
817 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
818 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
819 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
820 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
821 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
822 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
823 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
824 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
825 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
826 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
827 { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
828 { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
829 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
830 { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
831 .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
832 { }, /* Optional parameter entry */
833 { } /* Terminating entry */
836 MODULE_DEVICE_TABLE(usb, id_table_combined);
838 static struct usb_driver ftdi_driver = {
839 .name = "ftdi_sio",
840 .probe = usb_serial_probe,
841 .disconnect = usb_serial_disconnect,
842 .id_table = id_table_combined,
843 .no_dynamic_id = 1,
846 static const char *ftdi_chip_name[] = {
847 [SIO] = "SIO", /* the serial part of FT8U100AX */
848 [FT8U232AM] = "FT8U232AM",
849 [FT232BM] = "FT232BM",
850 [FT2232C] = "FT2232C",
851 [FT232RL] = "FT232RL",
852 [FT2232H] = "FT2232H",
853 [FT4232H] = "FT4232H",
854 [FT232H] = "FT232H"
858 /* Used for TIOCMIWAIT */
859 #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
860 #define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
861 /* End TIOCMIWAIT */
863 #define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \
864 | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
866 /* function prototypes for a FTDI serial converter */
867 static int ftdi_sio_probe(struct usb_serial *serial,
868 const struct usb_device_id *id);
869 static int ftdi_sio_port_probe(struct usb_serial_port *port);
870 static int ftdi_sio_port_remove(struct usb_serial_port *port);
871 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
872 static void ftdi_close(struct usb_serial_port *port);
873 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
874 static void ftdi_process_read_urb(struct urb *urb);
875 static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
876 void *dest, size_t size);
877 static void ftdi_set_termios(struct tty_struct *tty,
878 struct usb_serial_port *port, struct ktermios *old);
879 static int ftdi_tiocmget(struct tty_struct *tty);
880 static int ftdi_tiocmset(struct tty_struct *tty,
881 unsigned int set, unsigned int clear);
882 static int ftdi_ioctl(struct tty_struct *tty,
883 unsigned int cmd, unsigned long arg);
884 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
886 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
887 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
888 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
889 static __u32 ftdi_232bm_baud_to_divisor(int baud);
890 static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
891 static __u32 ftdi_2232h_baud_to_divisor(int baud);
893 static struct usb_serial_driver ftdi_sio_device = {
894 .driver = {
895 .owner = THIS_MODULE,
896 .name = "ftdi_sio",
898 .description = "FTDI USB Serial Device",
899 .usb_driver = &ftdi_driver,
900 .id_table = id_table_combined,
901 .num_ports = 1,
902 .bulk_in_size = 512,
903 .bulk_out_size = 256,
904 .probe = ftdi_sio_probe,
905 .port_probe = ftdi_sio_port_probe,
906 .port_remove = ftdi_sio_port_remove,
907 .open = ftdi_open,
908 .close = ftdi_close,
909 .dtr_rts = ftdi_dtr_rts,
910 .throttle = usb_serial_generic_throttle,
911 .unthrottle = usb_serial_generic_unthrottle,
912 .process_read_urb = ftdi_process_read_urb,
913 .prepare_write_buffer = ftdi_prepare_write_buffer,
914 .tiocmget = ftdi_tiocmget,
915 .tiocmset = ftdi_tiocmset,
916 .ioctl = ftdi_ioctl,
917 .set_termios = ftdi_set_termios,
918 .break_ctl = ftdi_break_ctl,
922 #define WDR_TIMEOUT 5000 /* default urb timeout */
923 #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
925 /* High and low are for DTR, RTS etc etc */
926 #define HIGH 1
927 #define LOW 0
930 * ***************************************************************************
931 * Utility functions
932 * ***************************************************************************
935 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
937 unsigned short int divisor;
938 /* divisor shifted 3 bits to the left */
939 int divisor3 = base / 2 / baud;
940 if ((divisor3 & 0x7) == 7)
941 divisor3++; /* round x.7/8 up to x+1 */
942 divisor = divisor3 >> 3;
943 divisor3 &= 0x7;
944 if (divisor3 == 1)
945 divisor |= 0xc000;
946 else if (divisor3 >= 4)
947 divisor |= 0x4000;
948 else if (divisor3 != 0)
949 divisor |= 0x8000;
950 else if (divisor == 1)
951 divisor = 0; /* special case for maximum baud rate */
952 return divisor;
955 static unsigned short int ftdi_232am_baud_to_divisor(int baud)
957 return ftdi_232am_baud_base_to_divisor(baud, 48000000);
960 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
962 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
963 __u32 divisor;
964 /* divisor shifted 3 bits to the left */
965 int divisor3 = base / 2 / baud;
966 divisor = divisor3 >> 3;
967 divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
968 /* Deal with special cases for highest baud rates. */
969 if (divisor == 1)
970 divisor = 0;
971 else if (divisor == 0x4001)
972 divisor = 1;
973 return divisor;
976 static __u32 ftdi_232bm_baud_to_divisor(int baud)
978 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
981 static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
983 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
984 __u32 divisor;
985 int divisor3;
987 /* hi-speed baud rate is 10-bit sampling instead of 16-bit */
988 divisor3 = base * 8 / (baud * 10);
990 divisor = divisor3 >> 3;
991 divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
992 /* Deal with special cases for highest baud rates. */
993 if (divisor == 1)
994 divisor = 0;
995 else if (divisor == 0x4001)
996 divisor = 1;
998 * Set this bit to turn off a divide by 2.5 on baud rate generator
999 * This enables baud rates up to 12Mbaud but cannot reach below 1200
1000 * baud with this bit set
1002 divisor |= 0x00020000;
1003 return divisor;
1006 static __u32 ftdi_2232h_baud_to_divisor(int baud)
1008 return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
1011 #define set_mctrl(port, set) update_mctrl((port), (set), 0)
1012 #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
1014 static int update_mctrl(struct usb_serial_port *port, unsigned int set,
1015 unsigned int clear)
1017 struct ftdi_private *priv = usb_get_serial_port_data(port);
1018 unsigned urb_value;
1019 int rv;
1021 if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
1022 dbg("%s - DTR|RTS not being set|cleared", __func__);
1023 return 0; /* no change */
1026 clear &= ~set; /* 'set' takes precedence over 'clear' */
1027 urb_value = 0;
1028 if (clear & TIOCM_DTR)
1029 urb_value |= FTDI_SIO_SET_DTR_LOW;
1030 if (clear & TIOCM_RTS)
1031 urb_value |= FTDI_SIO_SET_RTS_LOW;
1032 if (set & TIOCM_DTR)
1033 urb_value |= FTDI_SIO_SET_DTR_HIGH;
1034 if (set & TIOCM_RTS)
1035 urb_value |= FTDI_SIO_SET_RTS_HIGH;
1036 rv = usb_control_msg(port->serial->dev,
1037 usb_sndctrlpipe(port->serial->dev, 0),
1038 FTDI_SIO_SET_MODEM_CTRL_REQUEST,
1039 FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
1040 urb_value, priv->interface,
1041 NULL, 0, WDR_TIMEOUT);
1042 if (rv < 0) {
1043 dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
1044 __func__,
1045 (set & TIOCM_DTR) ? "HIGH" :
1046 (clear & TIOCM_DTR) ? "LOW" : "unchanged",
1047 (set & TIOCM_RTS) ? "HIGH" :
1048 (clear & TIOCM_RTS) ? "LOW" : "unchanged");
1049 } else {
1050 dbg("%s - DTR %s, RTS %s", __func__,
1051 (set & TIOCM_DTR) ? "HIGH" :
1052 (clear & TIOCM_DTR) ? "LOW" : "unchanged",
1053 (set & TIOCM_RTS) ? "HIGH" :
1054 (clear & TIOCM_RTS) ? "LOW" : "unchanged");
1055 /* FIXME: locking on last_dtr_rts */
1056 priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
1058 return rv;
1062 static __u32 get_ftdi_divisor(struct tty_struct *tty,
1063 struct usb_serial_port *port)
1065 struct ftdi_private *priv = usb_get_serial_port_data(port);
1066 __u32 div_value = 0;
1067 int div_okay = 1;
1068 int baud;
1071 * The logic involved in setting the baudrate can be cleanly split into
1072 * 3 steps.
1073 * 1. Standard baud rates are set in tty->termios->c_cflag
1074 * 2. If these are not enough, you can set any speed using alt_speed as
1075 * follows:
1076 * - set tty->termios->c_cflag speed to B38400
1077 * - set your real speed in tty->alt_speed; it gets ignored when
1078 * alt_speed==0, (or)
1079 * - call TIOCSSERIAL ioctl with (struct serial_struct) set as
1080 * follows:
1081 * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
1082 * this just sets alt_speed to (HI: 57600, VHI: 115200,
1083 * SHI: 230400, WARP: 460800)
1084 * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
1085 * 3. You can also set baud rate by setting custom divisor as follows
1086 * - set tty->termios->c_cflag speed to B38400
1087 * - call TIOCSSERIAL ioctl with (struct serial_struct) set as
1088 * follows:
1089 * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
1090 * o custom_divisor set to baud_base / your_new_baudrate
1091 * ** Step 3 is done courtesy of code borrowed from serial.c
1092 * I should really spend some time and separate + move this common
1093 * code to serial.c, it is replicated in nearly every serial driver
1094 * you see.
1097 /* 1. Get the baud rate from the tty settings, this observes
1098 alt_speed hack */
1100 baud = tty_get_baud_rate(tty);
1101 dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
1103 /* 2. Observe async-compatible custom_divisor hack, update baudrate
1104 if needed */
1106 if (baud == 38400 &&
1107 ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
1108 (priv->custom_divisor)) {
1109 baud = priv->baud_base / priv->custom_divisor;
1110 dbg("%s - custom divisor %d sets baud rate to %d",
1111 __func__, priv->custom_divisor, baud);
1114 /* 3. Convert baudrate to device-specific divisor */
1116 if (!baud)
1117 baud = 9600;
1118 switch (priv->chip_type) {
1119 case SIO: /* SIO chip */
1120 switch (baud) {
1121 case 300: div_value = ftdi_sio_b300; break;
1122 case 600: div_value = ftdi_sio_b600; break;
1123 case 1200: div_value = ftdi_sio_b1200; break;
1124 case 2400: div_value = ftdi_sio_b2400; break;
1125 case 4800: div_value = ftdi_sio_b4800; break;
1126 case 9600: div_value = ftdi_sio_b9600; break;
1127 case 19200: div_value = ftdi_sio_b19200; break;
1128 case 38400: div_value = ftdi_sio_b38400; break;
1129 case 57600: div_value = ftdi_sio_b57600; break;
1130 case 115200: div_value = ftdi_sio_b115200; break;
1131 } /* baud */
1132 if (div_value == 0) {
1133 dbg("%s - Baudrate (%d) requested is not supported",
1134 __func__, baud);
1135 div_value = ftdi_sio_b9600;
1136 baud = 9600;
1137 div_okay = 0;
1139 break;
1140 case FT8U232AM: /* 8U232AM chip */
1141 if (baud <= 3000000) {
1142 div_value = ftdi_232am_baud_to_divisor(baud);
1143 } else {
1144 dbg("%s - Baud rate too high!", __func__);
1145 baud = 9600;
1146 div_value = ftdi_232am_baud_to_divisor(9600);
1147 div_okay = 0;
1149 break;
1150 case FT232BM: /* FT232BM chip */
1151 case FT2232C: /* FT2232C chip */
1152 case FT232RL:
1153 if (baud <= 3000000) {
1154 __u16 product_id = le16_to_cpu(
1155 port->serial->dev->descriptor.idProduct);
1156 if (((FTDI_NDI_HUC_PID == product_id) ||
1157 (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
1158 (FTDI_NDI_FUTURE_2_PID == product_id) ||
1159 (FTDI_NDI_FUTURE_3_PID == product_id) ||
1160 (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
1161 (baud == 19200)) {
1162 baud = 1200000;
1164 div_value = ftdi_232bm_baud_to_divisor(baud);
1165 } else {
1166 dbg("%s - Baud rate too high!", __func__);
1167 div_value = ftdi_232bm_baud_to_divisor(9600);
1168 div_okay = 0;
1169 baud = 9600;
1171 break;
1172 case FT2232H: /* FT2232H chip */
1173 case FT4232H: /* FT4232H chip */
1174 case FT232H: /* FT232H chip */
1175 if ((baud <= 12000000) && (baud >= 1200)) {
1176 div_value = ftdi_2232h_baud_to_divisor(baud);
1177 } else if (baud < 1200) {
1178 div_value = ftdi_232bm_baud_to_divisor(baud);
1179 } else {
1180 dbg("%s - Baud rate too high!", __func__);
1181 div_value = ftdi_232bm_baud_to_divisor(9600);
1182 div_okay = 0;
1183 baud = 9600;
1185 break;
1186 } /* priv->chip_type */
1188 if (div_okay) {
1189 dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
1190 __func__, baud, (unsigned long)div_value,
1191 ftdi_chip_name[priv->chip_type]);
1194 tty_encode_baud_rate(tty, baud, baud);
1195 return div_value;
1198 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
1200 struct ftdi_private *priv = usb_get_serial_port_data(port);
1201 __u16 urb_value;
1202 __u16 urb_index;
1203 __u32 urb_index_value;
1204 int rv;
1206 urb_index_value = get_ftdi_divisor(tty, port);
1207 urb_value = (__u16)urb_index_value;
1208 urb_index = (__u16)(urb_index_value >> 16);
1209 if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) ||
1210 (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) {
1211 /* Probably the BM type needs the MSB of the encoded fractional
1212 * divider also moved like for the chips above. Any infos? */
1213 urb_index = (__u16)((urb_index << 8) | priv->interface);
1216 rv = usb_control_msg(port->serial->dev,
1217 usb_sndctrlpipe(port->serial->dev, 0),
1218 FTDI_SIO_SET_BAUDRATE_REQUEST,
1219 FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
1220 urb_value, urb_index,
1221 NULL, 0, WDR_SHORT_TIMEOUT);
1222 return rv;
1225 static int write_latency_timer(struct usb_serial_port *port)
1227 struct ftdi_private *priv = usb_get_serial_port_data(port);
1228 struct usb_device *udev = port->serial->dev;
1229 int rv;
1230 int l = priv->latency;
1232 if (priv->flags & ASYNC_LOW_LATENCY)
1233 l = 1;
1235 dbg("%s: setting latency timer = %i", __func__, l);
1237 rv = usb_control_msg(udev,
1238 usb_sndctrlpipe(udev, 0),
1239 FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
1240 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
1241 l, priv->interface,
1242 NULL, 0, WDR_TIMEOUT);
1243 if (rv < 0)
1244 dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
1245 return rv;
1248 static int read_latency_timer(struct usb_serial_port *port)
1250 struct ftdi_private *priv = usb_get_serial_port_data(port);
1251 struct usb_device *udev = port->serial->dev;
1252 unsigned char *buf;
1253 int rv;
1255 dbg("%s", __func__);
1257 buf = kmalloc(1, GFP_KERNEL);
1258 if (!buf)
1259 return -ENOMEM;
1261 rv = usb_control_msg(udev,
1262 usb_rcvctrlpipe(udev, 0),
1263 FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
1264 FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
1265 0, priv->interface,
1266 buf, 1, WDR_TIMEOUT);
1267 if (rv < 0)
1268 dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
1269 else
1270 priv->latency = buf[0];
1272 kfree(buf);
1274 return rv;
1277 static int get_serial_info(struct usb_serial_port *port,
1278 struct serial_struct __user *retinfo)
1280 struct ftdi_private *priv = usb_get_serial_port_data(port);
1281 struct serial_struct tmp;
1283 if (!retinfo)
1284 return -EFAULT;
1285 memset(&tmp, 0, sizeof(tmp));
1286 tmp.flags = priv->flags;
1287 tmp.baud_base = priv->baud_base;
1288 tmp.custom_divisor = priv->custom_divisor;
1289 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1290 return -EFAULT;
1291 return 0;
1294 static int set_serial_info(struct tty_struct *tty,
1295 struct usb_serial_port *port, struct serial_struct __user *newinfo)
1297 struct ftdi_private *priv = usb_get_serial_port_data(port);
1298 struct serial_struct new_serial;
1299 struct ftdi_private old_priv;
1301 if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
1302 return -EFAULT;
1304 mutex_lock(&priv->cfg_lock);
1305 old_priv = *priv;
1307 /* Do error checking and permission checking */
1309 if (!capable(CAP_SYS_ADMIN)) {
1310 if (((new_serial.flags & ~ASYNC_USR_MASK) !=
1311 (priv->flags & ~ASYNC_USR_MASK))) {
1312 mutex_unlock(&priv->cfg_lock);
1313 return -EPERM;
1315 priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
1316 (new_serial.flags & ASYNC_USR_MASK));
1317 priv->custom_divisor = new_serial.custom_divisor;
1318 goto check_and_exit;
1321 if ((new_serial.baud_base != priv->baud_base) &&
1322 (new_serial.baud_base < 9600)) {
1323 mutex_unlock(&priv->cfg_lock);
1324 return -EINVAL;
1327 /* Make the changes - these are privileged changes! */
1329 priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
1330 (new_serial.flags & ASYNC_FLAGS));
1331 priv->custom_divisor = new_serial.custom_divisor;
1333 write_latency_timer(port);
1335 check_and_exit:
1336 if ((old_priv.flags & ASYNC_SPD_MASK) !=
1337 (priv->flags & ASYNC_SPD_MASK)) {
1338 if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1339 tty->alt_speed = 57600;
1340 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1341 tty->alt_speed = 115200;
1342 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1343 tty->alt_speed = 230400;
1344 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1345 tty->alt_speed = 460800;
1346 else
1347 tty->alt_speed = 0;
1349 if (((old_priv.flags & ASYNC_SPD_MASK) !=
1350 (priv->flags & ASYNC_SPD_MASK)) ||
1351 (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
1352 (old_priv.custom_divisor != priv->custom_divisor))) {
1353 change_speed(tty, port);
1354 mutex_unlock(&priv->cfg_lock);
1356 else
1357 mutex_unlock(&priv->cfg_lock);
1358 return 0;
1361 static int get_lsr_info(struct usb_serial_port *port,
1362 struct serial_struct __user *retinfo)
1364 struct ftdi_private *priv = usb_get_serial_port_data(port);
1365 unsigned int result = 0;
1367 if (!retinfo)
1368 return -EFAULT;
1370 if (priv->transmit_empty)
1371 result = TIOCSER_TEMT;
1373 if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
1374 return -EFAULT;
1375 return 0;
1379 /* Determine type of FTDI chip based on USB config and descriptor. */
1380 static void ftdi_determine_type(struct usb_serial_port *port)
1382 struct ftdi_private *priv = usb_get_serial_port_data(port);
1383 struct usb_serial *serial = port->serial;
1384 struct usb_device *udev = serial->dev;
1385 unsigned version;
1386 unsigned interfaces;
1388 /* Assume it is not the original SIO device for now. */
1389 priv->baud_base = 48000000 / 2;
1391 version = le16_to_cpu(udev->descriptor.bcdDevice);
1392 interfaces = udev->actconfig->desc.bNumInterfaces;
1393 dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
1394 version, interfaces);
1395 if (interfaces > 1) {
1396 int inter;
1398 /* Multiple interfaces.*/
1399 if (version == 0x0800) {
1400 priv->chip_type = FT4232H;
1401 /* Hi-speed - baud clock runs at 120MHz */
1402 priv->baud_base = 120000000 / 2;
1403 } else if (version == 0x0700) {
1404 priv->chip_type = FT2232H;
1405 /* Hi-speed - baud clock runs at 120MHz */
1406 priv->baud_base = 120000000 / 2;
1407 } else
1408 priv->chip_type = FT2232C;
1410 /* Determine interface code. */
1411 inter = serial->interface->altsetting->desc.bInterfaceNumber;
1412 if (inter == 0) {
1413 priv->interface = INTERFACE_A;
1414 } else if (inter == 1) {
1415 priv->interface = INTERFACE_B;
1416 } else if (inter == 2) {
1417 priv->interface = INTERFACE_C;
1418 } else if (inter == 3) {
1419 priv->interface = INTERFACE_D;
1421 /* BM-type devices have a bug where bcdDevice gets set
1422 * to 0x200 when iSerialNumber is 0. */
1423 if (version < 0x500) {
1424 dbg("%s: something fishy - bcdDevice too low for multi-interface device",
1425 __func__);
1427 } else if (version < 0x200) {
1428 /* Old device. Assume it's the original SIO. */
1429 priv->chip_type = SIO;
1430 priv->baud_base = 12000000 / 16;
1431 } else if (version < 0x400) {
1432 /* Assume it's an FT8U232AM (or FT8U245AM) */
1433 /* (It might be a BM because of the iSerialNumber bug,
1434 * but it will still work as an AM device.) */
1435 priv->chip_type = FT8U232AM;
1436 } else if (version < 0x600) {
1437 /* Assume it's an FT232BM (or FT245BM) */
1438 priv->chip_type = FT232BM;
1439 } else if (version < 0x900) {
1440 /* Assume it's an FT232RL */
1441 priv->chip_type = FT232RL;
1442 } else {
1443 /* Assume it's an FT232H */
1444 priv->chip_type = FT232H;
1446 dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
1450 /* Determine the maximum packet size for the device. This depends on the chip
1451 * type and the USB host capabilities. The value should be obtained from the
1452 * device descriptor as the chip will use the appropriate values for the host.*/
1453 static void ftdi_set_max_packet_size(struct usb_serial_port *port)
1455 struct ftdi_private *priv = usb_get_serial_port_data(port);
1456 struct usb_serial *serial = port->serial;
1457 struct usb_device *udev = serial->dev;
1459 struct usb_interface *interface = serial->interface;
1460 struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
1462 unsigned num_endpoints;
1463 int i;
1465 num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
1466 dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
1468 /* NOTE: some customers have programmed FT232R/FT245R devices
1469 * with an endpoint size of 0 - not good. In this case, we
1470 * want to override the endpoint descriptor setting and use a
1471 * value of 64 for wMaxPacketSize */
1472 for (i = 0; i < num_endpoints; i++) {
1473 dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
1474 interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
1475 ep_desc = &interface->cur_altsetting->endpoint[i].desc;
1476 if (ep_desc->wMaxPacketSize == 0) {
1477 ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
1478 dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
1482 /* set max packet size based on descriptor */
1483 priv->max_packet_size = le16_to_cpu(ep_desc->wMaxPacketSize);
1485 dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
1490 * ***************************************************************************
1491 * Sysfs Attribute
1492 * ***************************************************************************
1495 static ssize_t show_latency_timer(struct device *dev,
1496 struct device_attribute *attr, char *buf)
1498 struct usb_serial_port *port = to_usb_serial_port(dev);
1499 struct ftdi_private *priv = usb_get_serial_port_data(port);
1500 if (priv->flags & ASYNC_LOW_LATENCY)
1501 return sprintf(buf, "1\n");
1502 else
1503 return sprintf(buf, "%i\n", priv->latency);
1507 /* Write a new value of the latency timer, in units of milliseconds. */
1508 static ssize_t store_latency_timer(struct device *dev,
1509 struct device_attribute *attr, const char *valbuf,
1510 size_t count)
1512 struct usb_serial_port *port = to_usb_serial_port(dev);
1513 struct ftdi_private *priv = usb_get_serial_port_data(port);
1514 int v = simple_strtoul(valbuf, NULL, 10);
1515 int rv;
1517 priv->latency = v;
1518 rv = write_latency_timer(port);
1519 if (rv < 0)
1520 return -EIO;
1521 return count;
1524 /* Write an event character directly to the FTDI register. The ASCII
1525 value is in the low 8 bits, with the enable bit in the 9th bit. */
1526 static ssize_t store_event_char(struct device *dev,
1527 struct device_attribute *attr, const char *valbuf, size_t count)
1529 struct usb_serial_port *port = to_usb_serial_port(dev);
1530 struct ftdi_private *priv = usb_get_serial_port_data(port);
1531 struct usb_device *udev = port->serial->dev;
1532 int v = simple_strtoul(valbuf, NULL, 10);
1533 int rv;
1535 dbg("%s: setting event char = %i", __func__, v);
1537 rv = usb_control_msg(udev,
1538 usb_sndctrlpipe(udev, 0),
1539 FTDI_SIO_SET_EVENT_CHAR_REQUEST,
1540 FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
1541 v, priv->interface,
1542 NULL, 0, WDR_TIMEOUT);
1543 if (rv < 0) {
1544 dbg("Unable to write event character: %i", rv);
1545 return -EIO;
1548 return count;
1551 static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
1552 store_latency_timer);
1553 static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
1555 static int create_sysfs_attrs(struct usb_serial_port *port)
1557 struct ftdi_private *priv = usb_get_serial_port_data(port);
1558 int retval = 0;
1560 dbg("%s", __func__);
1562 /* XXX I've no idea if the original SIO supports the event_char
1563 * sysfs parameter, so I'm playing it safe. */
1564 if (priv->chip_type != SIO) {
1565 dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
1566 retval = device_create_file(&port->dev, &dev_attr_event_char);
1567 if ((!retval) &&
1568 (priv->chip_type == FT232BM ||
1569 priv->chip_type == FT2232C ||
1570 priv->chip_type == FT232RL ||
1571 priv->chip_type == FT2232H ||
1572 priv->chip_type == FT4232H ||
1573 priv->chip_type == FT232H)) {
1574 retval = device_create_file(&port->dev,
1575 &dev_attr_latency_timer);
1578 return retval;
1581 static void remove_sysfs_attrs(struct usb_serial_port *port)
1583 struct ftdi_private *priv = usb_get_serial_port_data(port);
1585 dbg("%s", __func__);
1587 /* XXX see create_sysfs_attrs */
1588 if (priv->chip_type != SIO) {
1589 device_remove_file(&port->dev, &dev_attr_event_char);
1590 if (priv->chip_type == FT232BM ||
1591 priv->chip_type == FT2232C ||
1592 priv->chip_type == FT232RL ||
1593 priv->chip_type == FT2232H ||
1594 priv->chip_type == FT4232H ||
1595 priv->chip_type == FT232H) {
1596 device_remove_file(&port->dev, &dev_attr_latency_timer);
1603 * ***************************************************************************
1604 * FTDI driver specific functions
1605 * ***************************************************************************
1608 /* Probe function to check for special devices */
1609 static int ftdi_sio_probe(struct usb_serial *serial,
1610 const struct usb_device_id *id)
1612 struct ftdi_sio_quirk *quirk =
1613 (struct ftdi_sio_quirk *)id->driver_info;
1615 if (quirk && quirk->probe) {
1616 int ret = quirk->probe(serial);
1617 if (ret != 0)
1618 return ret;
1621 usb_set_serial_data(serial, (void *)id->driver_info);
1623 return 0;
1626 static int ftdi_sio_port_probe(struct usb_serial_port *port)
1628 struct ftdi_private *priv;
1629 struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
1632 dbg("%s", __func__);
1634 priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
1635 if (!priv) {
1636 dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
1637 sizeof(struct ftdi_private));
1638 return -ENOMEM;
1641 kref_init(&priv->kref);
1642 mutex_init(&priv->cfg_lock);
1643 init_waitqueue_head(&priv->delta_msr_wait);
1645 priv->flags = ASYNC_LOW_LATENCY;
1647 if (quirk && quirk->port_probe)
1648 quirk->port_probe(priv);
1650 priv->port = port;
1651 usb_set_serial_port_data(port, priv);
1653 ftdi_determine_type(port);
1654 ftdi_set_max_packet_size(port);
1655 if (read_latency_timer(port) < 0)
1656 priv->latency = 16;
1657 write_latency_timer(port);
1658 create_sysfs_attrs(port);
1659 return 0;
1662 /* Setup for the USB-UIRT device, which requires hardwired
1663 * baudrate (38400 gets mapped to 312500) */
1664 /* Called from usbserial:serial_probe */
1665 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
1667 dbg("%s", __func__);
1669 priv->flags |= ASYNC_SPD_CUST;
1670 priv->custom_divisor = 77;
1671 priv->force_baud = 38400;
1674 /* Setup for the HE-TIRA1 device, which requires hardwired
1675 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
1677 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
1679 dbg("%s", __func__);
1681 priv->flags |= ASYNC_SPD_CUST;
1682 priv->custom_divisor = 240;
1683 priv->force_baud = 38400;
1684 priv->force_rtscts = 1;
1688 * Module parameter to control latency timer for NDI FTDI-based USB devices.
1689 * If this value is not set in modprobe.conf.local its value will be set to 1ms.
1691 static int ndi_latency_timer = 1;
1693 /* Setup for the NDI FTDI-based USB devices, which requires hardwired
1694 * baudrate (19200 gets mapped to 1200000).
1696 * Called from usbserial:serial_probe.
1698 static int ftdi_NDI_device_setup(struct usb_serial *serial)
1700 struct usb_device *udev = serial->dev;
1701 int latency = ndi_latency_timer;
1703 if (latency == 0)
1704 latency = 1;
1705 if (latency > 99)
1706 latency = 99;
1708 dbg("%s setting NDI device latency to %d", __func__, latency);
1709 dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
1711 /* FIXME: errors are not returned */
1712 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
1713 FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
1714 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
1715 latency, 0, NULL, 0, WDR_TIMEOUT);
1716 return 0;
1720 * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
1721 * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
1722 * userspace using openocd.
1724 static int ftdi_jtag_probe(struct usb_serial *serial)
1726 struct usb_device *udev = serial->dev;
1727 struct usb_interface *interface = serial->interface;
1729 dbg("%s", __func__);
1731 if (interface == udev->actconfig->interface[0]) {
1732 dev_info(&udev->dev,
1733 "Ignoring serial port reserved for JTAG\n");
1734 return -ENODEV;
1737 return 0;
1741 * First and second port on STMCLiteadaptors is reserved for JTAG interface
1742 * and the forth port for pio
1744 static int ftdi_stmclite_probe(struct usb_serial *serial)
1746 struct usb_device *udev = serial->dev;
1747 struct usb_interface *interface = serial->interface;
1749 dbg("%s", __func__);
1751 if (interface == udev->actconfig->interface[2])
1752 return 0;
1754 dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
1756 return -ENODEV;
1760 * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
1761 * We have to correct it if we want to read from it.
1763 static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
1765 struct usb_host_endpoint *ep = serial->dev->ep_in[1];
1766 struct usb_endpoint_descriptor *ep_desc = &ep->desc;
1768 if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
1769 ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
1770 dev_info(&serial->dev->dev,
1771 "Fixing invalid wMaxPacketSize on read pipe\n");
1774 return 0;
1777 static void ftdi_sio_priv_release(struct kref *k)
1779 struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
1781 kfree(priv);
1784 static int ftdi_sio_port_remove(struct usb_serial_port *port)
1786 struct ftdi_private *priv = usb_get_serial_port_data(port);
1788 dbg("%s", __func__);
1790 remove_sysfs_attrs(port);
1792 kref_put(&priv->kref, ftdi_sio_priv_release);
1794 return 0;
1797 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
1799 struct usb_device *dev = port->serial->dev;
1800 struct ftdi_private *priv = usb_get_serial_port_data(port);
1801 int result;
1803 dbg("%s", __func__);
1805 /* No error checking for this (will get errors later anyway) */
1806 /* See ftdi_sio.h for description of what is reset */
1807 usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
1808 FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
1809 FTDI_SIO_RESET_SIO,
1810 priv->interface, NULL, 0, WDR_TIMEOUT);
1812 /* Termios defaults are set by usb_serial_init. We don't change
1813 port->tty->termios - this would lose speed settings, etc.
1814 This is same behaviour as serial.c/rs_open() - Kuba */
1816 /* ftdi_set_termios will send usb control messages */
1817 if (tty)
1818 ftdi_set_termios(tty, port, tty->termios);
1820 /* Start reading from the device */
1821 result = usb_serial_generic_open(tty, port);
1822 if (!result)
1823 kref_get(&priv->kref);
1825 return result;
1828 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
1830 struct ftdi_private *priv = usb_get_serial_port_data(port);
1832 mutex_lock(&port->serial->disc_mutex);
1833 if (!port->serial->disconnected) {
1834 /* Disable flow control */
1835 if (!on && usb_control_msg(port->serial->dev,
1836 usb_sndctrlpipe(port->serial->dev, 0),
1837 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
1838 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
1839 0, priv->interface, NULL, 0,
1840 WDR_TIMEOUT) < 0) {
1841 dev_err(&port->dev, "error from flowcontrol urb\n");
1843 /* drop RTS and DTR */
1844 if (on)
1845 set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
1846 else
1847 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
1849 mutex_unlock(&port->serial->disc_mutex);
1853 * usbserial:__serial_close only calls ftdi_close if the point is open
1855 * This only gets called when it is the last close
1857 static void ftdi_close(struct usb_serial_port *port)
1859 struct ftdi_private *priv = usb_get_serial_port_data(port);
1861 dbg("%s", __func__);
1863 usb_serial_generic_close(port);
1864 kref_put(&priv->kref, ftdi_sio_priv_release);
1867 /* The SIO requires the first byte to have:
1868 * B0 1
1869 * B1 0
1870 * B2..7 length of message excluding byte 0
1872 * The new devices do not require this byte
1874 static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
1875 void *dest, size_t size)
1877 struct ftdi_private *priv;
1878 int count;
1879 unsigned long flags;
1881 priv = usb_get_serial_port_data(port);
1883 if (priv->chip_type == SIO) {
1884 unsigned char *buffer = dest;
1885 int i, len, c;
1887 count = 0;
1888 spin_lock_irqsave(&port->lock, flags);
1889 for (i = 0; i < size - 1; i += priv->max_packet_size) {
1890 len = min_t(int, size - i, priv->max_packet_size) - 1;
1891 c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
1892 if (!c)
1893 break;
1894 buffer[i] = (c << 2) + 1;
1895 count += c + 1;
1897 spin_unlock_irqrestore(&port->lock, flags);
1898 } else {
1899 count = kfifo_out_locked(&port->write_fifo, dest, size,
1900 &port->lock);
1903 return count;
1906 #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
1908 static int ftdi_process_packet(struct tty_struct *tty,
1909 struct usb_serial_port *port, struct ftdi_private *priv,
1910 char *packet, int len)
1912 int i;
1913 char status;
1914 char flag;
1915 char *ch;
1917 dbg("%s - port %d", __func__, port->number);
1919 if (len < 2) {
1920 dbg("malformed packet");
1921 return 0;
1924 /* Compare new line status to the old one, signal if different/
1925 N.B. packet may be processed more than once, but differences
1926 are only processed once. */
1927 status = packet[0] & FTDI_STATUS_B0_MASK;
1928 if (status != priv->prev_status) {
1929 priv->diff_status |= status ^ priv->prev_status;
1930 wake_up_interruptible(&priv->delta_msr_wait);
1931 priv->prev_status = status;
1934 flag = TTY_NORMAL;
1935 if (packet[1] & FTDI_RS_ERR_MASK) {
1936 /* Break takes precedence over parity, which takes precedence
1937 * over framing errors */
1938 if (packet[1] & FTDI_RS_BI) {
1939 flag = TTY_BREAK;
1940 usb_serial_handle_break(port);
1941 } else if (packet[1] & FTDI_RS_PE) {
1942 flag = TTY_PARITY;
1943 } else if (packet[1] & FTDI_RS_FE) {
1944 flag = TTY_FRAME;
1946 /* Overrun is special, not associated with a char */
1947 if (packet[1] & FTDI_RS_OE)
1948 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
1951 /* save if the transmitter is empty or not */
1952 if (packet[1] & FTDI_RS_TEMT)
1953 priv->transmit_empty = 1;
1954 else
1955 priv->transmit_empty = 0;
1957 len -= 2;
1958 if (!len)
1959 return 0; /* status only */
1960 ch = packet + 2;
1962 if (port->port.console && port->sysrq) {
1963 for (i = 0; i < len; i++, ch++) {
1964 if (!usb_serial_handle_sysrq_char(port, *ch))
1965 tty_insert_flip_char(tty, *ch, flag);
1967 } else {
1968 tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
1971 return len;
1974 static void ftdi_process_read_urb(struct urb *urb)
1976 struct usb_serial_port *port = urb->context;
1977 struct tty_struct *tty;
1978 struct ftdi_private *priv = usb_get_serial_port_data(port);
1979 char *data = (char *)urb->transfer_buffer;
1980 int i;
1981 int len;
1982 int count = 0;
1984 tty = tty_port_tty_get(&port->port);
1985 if (!tty)
1986 return;
1988 for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
1989 len = min_t(int, urb->actual_length - i, priv->max_packet_size);
1990 count += ftdi_process_packet(tty, port, priv, &data[i], len);
1993 if (count)
1994 tty_flip_buffer_push(tty);
1995 tty_kref_put(tty);
1998 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
2000 struct usb_serial_port *port = tty->driver_data;
2001 struct ftdi_private *priv = usb_get_serial_port_data(port);
2002 __u16 urb_value;
2004 /* break_state = -1 to turn on break, and 0 to turn off break */
2005 /* see drivers/char/tty_io.c to see it used */
2006 /* last_set_data_urb_value NEVER has the break bit set in it */
2008 if (break_state)
2009 urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
2010 else
2011 urb_value = priv->last_set_data_urb_value;
2013 if (usb_control_msg(port->serial->dev,
2014 usb_sndctrlpipe(port->serial->dev, 0),
2015 FTDI_SIO_SET_DATA_REQUEST,
2016 FTDI_SIO_SET_DATA_REQUEST_TYPE,
2017 urb_value , priv->interface,
2018 NULL, 0, WDR_TIMEOUT) < 0) {
2019 dev_err(&port->dev, "%s FAILED to enable/disable break state "
2020 "(state was %d)\n", __func__, break_state);
2023 dbg("%s break state is %d - urb is %d", __func__,
2024 break_state, urb_value);
2028 /* old_termios contains the original termios settings and tty->termios contains
2029 * the new setting to be used
2030 * WARNING: set_termios calls this with old_termios in kernel space
2032 static void ftdi_set_termios(struct tty_struct *tty,
2033 struct usb_serial_port *port, struct ktermios *old_termios)
2035 struct usb_device *dev = port->serial->dev;
2036 struct ftdi_private *priv = usb_get_serial_port_data(port);
2037 struct ktermios *termios = tty->termios;
2038 unsigned int cflag = termios->c_cflag;
2039 __u16 urb_value; /* will hold the new flags */
2041 /* Added for xon/xoff support */
2042 unsigned int iflag = termios->c_iflag;
2043 unsigned char vstop;
2044 unsigned char vstart;
2046 dbg("%s", __func__);
2048 /* Force baud rate if this device requires it, unless it is set to
2049 B0. */
2050 if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
2051 dbg("%s: forcing baud rate for this device", __func__);
2052 tty_encode_baud_rate(tty, priv->force_baud,
2053 priv->force_baud);
2056 /* Force RTS-CTS if this device requires it. */
2057 if (priv->force_rtscts) {
2058 dbg("%s: forcing rtscts for this device", __func__);
2059 termios->c_cflag |= CRTSCTS;
2062 cflag = termios->c_cflag;
2064 /* FIXME -For this cut I don't care if the line is really changing or
2065 not - so just do the change regardless - should be able to
2066 compare old_termios and tty->termios */
2067 /* NOTE These routines can get interrupted by
2068 ftdi_sio_read_bulk_callback - need to examine what this means -
2069 don't see any problems yet */
2071 /* Set number of data bits, parity, stop bits */
2073 urb_value = 0;
2074 urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
2075 FTDI_SIO_SET_DATA_STOP_BITS_1);
2076 if (cflag & PARENB) {
2077 if (cflag & CMSPAR)
2078 urb_value |= cflag & PARODD ?
2079 FTDI_SIO_SET_DATA_PARITY_MARK :
2080 FTDI_SIO_SET_DATA_PARITY_SPACE;
2081 else
2082 urb_value |= cflag & PARODD ?
2083 FTDI_SIO_SET_DATA_PARITY_ODD :
2084 FTDI_SIO_SET_DATA_PARITY_EVEN;
2085 } else {
2086 urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
2088 if (cflag & CSIZE) {
2089 switch (cflag & CSIZE) {
2090 case CS7: urb_value |= 7; dbg("Setting CS7"); break;
2091 case CS8: urb_value |= 8; dbg("Setting CS8"); break;
2092 default:
2093 dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
2097 /* This is needed by the break command since it uses the same command
2098 - but is or'ed with this value */
2099 priv->last_set_data_urb_value = urb_value;
2101 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
2102 FTDI_SIO_SET_DATA_REQUEST,
2103 FTDI_SIO_SET_DATA_REQUEST_TYPE,
2104 urb_value , priv->interface,
2105 NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
2106 dev_err(&port->dev, "%s FAILED to set "
2107 "databits/stopbits/parity\n", __func__);
2110 /* Now do the baudrate */
2111 if ((cflag & CBAUD) == B0) {
2112 /* Disable flow control */
2113 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
2114 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2115 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2116 0, priv->interface,
2117 NULL, 0, WDR_TIMEOUT) < 0) {
2118 dev_err(&port->dev,
2119 "%s error from disable flowcontrol urb\n",
2120 __func__);
2122 /* Drop RTS and DTR */
2123 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
2124 } else {
2125 /* set the baudrate determined before */
2126 mutex_lock(&priv->cfg_lock);
2127 if (change_speed(tty, port))
2128 dev_err(&port->dev, "%s urb failed to set baudrate\n",
2129 __func__);
2130 mutex_unlock(&priv->cfg_lock);
2131 /* Ensure RTS and DTR are raised when baudrate changed from 0 */
2132 if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
2133 set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
2136 /* Set flow control */
2137 /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
2138 if (cflag & CRTSCTS) {
2139 dbg("%s Setting to CRTSCTS flow control", __func__);
2140 if (usb_control_msg(dev,
2141 usb_sndctrlpipe(dev, 0),
2142 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2143 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2144 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
2145 NULL, 0, WDR_TIMEOUT) < 0) {
2146 dev_err(&port->dev,
2147 "urb failed to set to rts/cts flow control\n");
2150 } else {
2152 * Xon/Xoff code
2154 * Check the IXOFF status in the iflag component of the
2155 * termios structure. If IXOFF is not set, the pre-xon/xoff
2156 * code is executed.
2158 if (iflag & IXOFF) {
2159 dbg("%s request to enable xonxoff iflag=%04x",
2160 __func__, iflag);
2161 /* Try to enable the XON/XOFF on the ftdi_sio
2162 * Set the vstart and vstop -- could have been done up
2163 * above where a lot of other dereferencing is done but
2164 * that would be very inefficient as vstart and vstop
2165 * are not always needed.
2167 vstart = termios->c_cc[VSTART];
2168 vstop = termios->c_cc[VSTOP];
2169 urb_value = (vstop << 8) | (vstart);
2171 if (usb_control_msg(dev,
2172 usb_sndctrlpipe(dev, 0),
2173 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2174 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2175 urb_value , (FTDI_SIO_XON_XOFF_HS
2176 | priv->interface),
2177 NULL, 0, WDR_TIMEOUT) < 0) {
2178 dev_err(&port->dev, "urb failed to set to "
2179 "xon/xoff flow control\n");
2181 } else {
2182 /* else clause to only run if cflag ! CRTSCTS and iflag
2183 * ! XOFF. CHECKME Assuming XON/XOFF handled by tty
2184 * stack - not by device */
2185 dbg("%s Turning off hardware flow control", __func__);
2186 if (usb_control_msg(dev,
2187 usb_sndctrlpipe(dev, 0),
2188 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2189 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2190 0, priv->interface,
2191 NULL, 0, WDR_TIMEOUT) < 0) {
2192 dev_err(&port->dev,
2193 "urb failed to clear flow control\n");
2200 static int ftdi_tiocmget(struct tty_struct *tty)
2202 struct usb_serial_port *port = tty->driver_data;
2203 struct ftdi_private *priv = usb_get_serial_port_data(port);
2204 unsigned char *buf;
2205 int len;
2206 int ret;
2208 dbg("%s TIOCMGET", __func__);
2210 buf = kmalloc(2, GFP_KERNEL);
2211 if (!buf)
2212 return -ENOMEM;
2214 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
2215 * the same format as the data returned from the in point.
2217 switch (priv->chip_type) {
2218 case SIO:
2219 len = 1;
2220 break;
2221 case FT8U232AM:
2222 case FT232BM:
2223 case FT2232C:
2224 case FT232RL:
2225 case FT2232H:
2226 case FT4232H:
2227 case FT232H:
2228 len = 2;
2229 break;
2230 default:
2231 ret = -EFAULT;
2232 goto out;
2235 ret = usb_control_msg(port->serial->dev,
2236 usb_rcvctrlpipe(port->serial->dev, 0),
2237 FTDI_SIO_GET_MODEM_STATUS_REQUEST,
2238 FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
2239 0, priv->interface,
2240 buf, len, WDR_TIMEOUT);
2241 if (ret < 0)
2242 goto out;
2244 ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
2245 (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
2246 (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
2247 (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
2248 priv->last_dtr_rts;
2249 out:
2250 kfree(buf);
2251 return ret;
2254 static int ftdi_tiocmset(struct tty_struct *tty,
2255 unsigned int set, unsigned int clear)
2257 struct usb_serial_port *port = tty->driver_data;
2258 dbg("%s TIOCMSET", __func__);
2259 return update_mctrl(port, set, clear);
2262 static int ftdi_ioctl(struct tty_struct *tty,
2263 unsigned int cmd, unsigned long arg)
2265 struct usb_serial_port *port = tty->driver_data;
2266 struct ftdi_private *priv = usb_get_serial_port_data(port);
2268 dbg("%s cmd 0x%04x", __func__, cmd);
2270 /* Based on code from acm.c and others */
2271 switch (cmd) {
2273 case TIOCGSERIAL: /* gets serial port data */
2274 return get_serial_info(port,
2275 (struct serial_struct __user *) arg);
2277 case TIOCSSERIAL: /* sets serial port data */
2278 return set_serial_info(tty, port,
2279 (struct serial_struct __user *) arg);
2282 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
2283 * - mask passed in arg for lines of interest
2284 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
2285 * Caller should use TIOCGICOUNT to see which one it was.
2286 * (except that the driver doesn't support it !)
2288 * This code is borrowed from linux/drivers/char/serial.c
2290 case TIOCMIWAIT:
2291 while (priv != NULL) {
2292 interruptible_sleep_on(&priv->delta_msr_wait);
2293 /* see if a signal did it */
2294 if (signal_pending(current))
2295 return -ERESTARTSYS;
2296 else {
2297 char diff = priv->diff_status;
2299 if (diff == 0)
2300 return -EIO; /* no change => error */
2302 /* Consume all events */
2303 priv->diff_status = 0;
2305 /* Return 0 if caller wanted to know about
2306 these bits */
2307 if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
2308 ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
2309 ((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) ||
2310 ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) {
2311 return 0;
2314 * Otherwise caller can't care less about what
2315 * happened,and so we continue to wait for more
2316 * events.
2320 return 0;
2321 case TIOCSERGETLSR:
2322 return get_lsr_info(port, (struct serial_struct __user *)arg);
2323 break;
2324 default:
2325 break;
2327 /* This is not necessarily an error - turns out the higher layers
2328 * will do some ioctls themselves (see comment above)
2330 dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
2331 return -ENOIOCTLCMD;
2334 static int __init ftdi_init(void)
2336 int retval;
2338 dbg("%s", __func__);
2339 if (vendor > 0 && product > 0) {
2340 /* Add user specified VID/PID to reserved element of table. */
2341 int i;
2342 for (i = 0; id_table_combined[i].idVendor; i++)
2344 id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
2345 id_table_combined[i].idVendor = vendor;
2346 id_table_combined[i].idProduct = product;
2348 retval = usb_serial_register(&ftdi_sio_device);
2349 if (retval)
2350 goto failed_sio_register;
2351 retval = usb_register(&ftdi_driver);
2352 if (retval)
2353 goto failed_usb_register;
2355 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
2356 DRIVER_DESC "\n");
2357 return 0;
2358 failed_usb_register:
2359 usb_serial_deregister(&ftdi_sio_device);
2360 failed_sio_register:
2361 return retval;
2364 static void __exit ftdi_exit(void)
2366 dbg("%s", __func__);
2368 usb_deregister(&ftdi_driver);
2369 usb_serial_deregister(&ftdi_sio_device);
2373 module_init(ftdi_init);
2374 module_exit(ftdi_exit);
2376 MODULE_AUTHOR(DRIVER_AUTHOR);
2377 MODULE_DESCRIPTION(DRIVER_DESC);
2378 MODULE_LICENSE("GPL");
2380 module_param(debug, bool, S_IRUGO | S_IWUSR);
2381 MODULE_PARM_DESC(debug, "Debug enabled or not");
2382 module_param(vendor, ushort, 0);
2383 MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
2384 __MODULE_STRING(FTDI_VID)")");
2385 module_param(product, ushort, 0);
2386 MODULE_PARM_DESC(product, "User specified product ID");
2388 module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
2389 MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");