include/asm-m32r/system.h

   1 #ifndef _ASM_M32R_SYSTEM_H
   2 #define _ASM_M32R_SYSTEM_H
   3
   4 /*
   5  * This file is subject to the terms and conditions of the GNU General Public
   6  * License.  See the file "COPYING" in the main directory of this archive
   7  * for more details.
   8  *
   9  * Copyright (C) 2001  by Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
  10  * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
  11  */
  12
  13 #include <linux/config.h>
  14 #include <asm/assembler.h>
  15
  16 #ifdef __KERNEL__
  17
  18 /*
  19  * switch_to(prev, next) should switch from task `prev' to `next'
  20  * `prev' will never be the same as `next'.
  21  *
  22  * `next' and `prev' should be struct task_struct, but it isn't always defined
  23  */
  24
  25 #ifndef CONFIG_SMP
  26 #define prepare_to_switch()  do { } while(0)
  27 #endif  /* not CONFIG_SMP */
  28
  29 #define switch_to(prev, next, last)  do { \
  30         register unsigned long  arg0 __asm__ ("r0") = (unsigned long)prev; \
  31         register unsigned long  arg1 __asm__ ("r1") = (unsigned long)next; \
  32         register unsigned long  *oldsp __asm__ ("r2") = &(prev->thread.sp); \
  33         register unsigned long  *newsp __asm__ ("r3") = &(next->thread.sp); \
  34         register unsigned long  *oldlr __asm__ ("r4") = &(prev->thread.lr); \
  35         register unsigned long  *newlr __asm__ ("r5") = &(next->thread.lr); \
  36         register struct task_struct  *__last __asm__ ("r6"); \
  37         __asm__ __volatile__ ( \
  38                 "st     r8, @-r15                                 \n\t" \
  39                 "st     r9, @-r15                                 \n\t" \
  40                 "st    r10, @-r15                                 \n\t" \
  41                 "st    r11, @-r15                                 \n\t" \
  42                 "st    r12, @-r15                                 \n\t" \
  43                 "st    r13, @-r15                                 \n\t" \
  44                 "st    r14, @-r15                                 \n\t" \
  45                 "seth  r14, #high(1f)                             \n\t" \
  46                 "or3   r14, r14, #low(1f)                         \n\t" \
  47                 "st    r14, @r4    ; store old LR                 \n\t" \
  48                 "st    r15, @r2    ; store old SP                 \n\t" \
  49                 "ld    r15, @r3    ; load new SP                  \n\t" \
  50                 "st     r0, @-r15  ; store 'prev' onto new stack  \n\t" \
  51                 "ld    r14, @r5    ; load new LR                  \n\t" \
  52                 "jmp   r14                                        \n\t" \
  53                 ".fillinsn                                        \n  " \
  54                 "1:                                               \n\t" \
  55                 "ld     r6, @r15+  ; load 'prev' from new stack   \n\t" \
  56                 "ld    r14, @r15+                                 \n\t" \
  57                 "ld    r13, @r15+                                 \n\t" \
  58                 "ld    r12, @r15+                                 \n\t" \
  59                 "ld    r11, @r15+                                 \n\t" \
  60                 "ld    r10, @r15+                                 \n\t" \
  61                 "ld     r9, @r15+                                 \n\t" \
  62                 "ld     r8, @r15+                                 \n\t" \
  63                 : "=&r" (__last) \
  64                 : "r" (arg0), "r" (arg1), "r" (oldsp), "r" (newsp), \
  65                   "r" (oldlr), "r" (newlr) \
  66                 : "memory" \
  67         ); \
  68         last = __last; \
  69 } while(0)
  70
  71 /*
  72  * On SMP systems, when the scheduler does migration-cost autodetection,
  73  * it needs a way to flush as much of the CPU's caches as possible.
  74  *
  75  * TODO: fill this in!
  76  */
  77 static inline void sched_cacheflush(void)
  78 {
  79 }
  80
  81 /* Interrupt Control */
  82 #if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104)
  83 #define local_irq_enable() \
  84         __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory")
  85 #define local_irq_disable() \
  86         __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory")
  87 #else   /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
  88 static inline void local_irq_enable(void)
  89 {
  90         unsigned long tmpreg;
  91         __asm__ __volatile__(
  92                 "mvfc   %0, psw;                \n\t"
  93                 "or3    %0, %0, #0x0040;        \n\t"
  94                 "mvtc   %0, psw;                \n\t"
  95         : "=&r" (tmpreg) : : "cbit", "memory");
  96 }
  97
  98 static inline void local_irq_disable(void)
  99 {
 100         unsigned long tmpreg0, tmpreg1;
 101         __asm__ __volatile__(
 102                 "ld24   %0, #0  ; Use 32-bit insn. \n\t"
 103                 "mvfc   %1, psw ; No interrupt can be accepted here. \n\t"
 104                 "mvtc   %0, psw \n\t"
 105                 "and3   %0, %1, #0xffbf \n\t"
 106                 "mvtc   %0, psw \n\t"
 107         : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory");
 108 }
 109 #endif  /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
 110
 111 #define local_save_flags(x) \
 112         __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */)
 113
 114 #define local_irq_restore(x) \
 115         __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \
 116                 : "r" (x) : "cbit", "memory")
 117
 118 #if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
 119 #define local_irq_save(x)                               \
 120         __asm__ __volatile__(                           \
 121                 "mvfc   %0, psw;                \n\t"   \
 122                 "clrpsw #0x40 -> nop;           \n\t"   \
 123                 : "=r" (x) : /* no input */ : "memory")
 124 #else   /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
 125 #define local_irq_save(x)                               \
 126         ({                                              \
 127                 unsigned long tmpreg;                   \
 128                 __asm__ __volatile__(                   \
 129                         "ld24   %1, #0 \n\t"            \
 130                         "mvfc   %0, psw \n\t"           \
 131                         "mvtc   %1, psw \n\t"           \
 132                         "and3   %1, %0, #0xffbf \n\t"   \
 133                         "mvtc   %1, psw \n\t"           \
 134                         : "=r" (x), "=&r" (tmpreg)      \
 135                         : : "cbit", "memory");          \
 136         })
 137 #endif  /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
 138
 139 #define irqs_disabled()                                 \
 140         ({                                              \
 141                 unsigned long flags;                    \
 142                 local_save_flags(flags);                \
 143                 !(flags & 0x40);                        \
 144         })
 145
 146 #define nop()   __asm__ __volatile__ ("nop" : : )
 147
 148 #define xchg(ptr,x) \
 149         ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
 150
 151 #define tas(ptr)        (xchg((ptr),1))
 152
 153 #ifdef CONFIG_SMP
 154 extern void  __xchg_called_with_bad_pointer(void);
 155 #endif
 156
 157 #ifdef CONFIG_CHIP_M32700_TS1
 158 #define DCACHE_CLEAR(reg0, reg1, addr)                          \
 159         "seth   "reg1", #high(dcache_dummy);            \n\t"   \
 160         "or3    "reg1", "reg1", #low(dcache_dummy);     \n\t"   \
 161         "lock   "reg0", @"reg1";                        \n\t"   \
 162         "add3   "reg0", "addr", #0x1000;                \n\t"   \
 163         "ld     "reg0", @"reg0";                        \n\t"   \
 164         "add3   "reg0", "addr", #0x2000;                \n\t"   \
 165         "ld     "reg0", @"reg0";                        \n\t"   \
 166         "unlock "reg0", @"reg1";                        \n\t"
 167         /* FIXME: This workaround code cannot handle kenrel modules
 168          * correctly under SMP environment.
 169          */
 170 #else   /* CONFIG_CHIP_M32700_TS1 */
 171 #define DCACHE_CLEAR(reg0, reg1, addr)
 172 #endif  /* CONFIG_CHIP_M32700_TS1 */
 173
 174 static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr,
 175         int size)
 176 {
 177         unsigned long flags;
 178         unsigned long tmp = 0;
 179
 180         local_irq_save(flags);
 181
 182         switch (size) {
 183 #ifndef CONFIG_SMP
 184         case 1:
 185                 __asm__ __volatile__ (
 186                         "ldb    %0, @%2 \n\t"
 187                         "stb    %1, @%2 \n\t"
 188                         : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
 189                 break;
 190         case 2:
 191                 __asm__ __volatile__ (
 192                         "ldh    %0, @%2 \n\t"
 193                         "sth    %1, @%2 \n\t"
 194                         : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
 195                 break;
 196         case 4:
 197                 __asm__ __volatile__ (
 198                         "ld     %0, @%2 \n\t"
 199                         "st     %1, @%2 \n\t"
 200                         : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
 201                 break;
 202 #else  /* CONFIG_SMP */
 203         case 4:
 204                 __asm__ __volatile__ (
 205                         DCACHE_CLEAR("%0", "r4", "%2")
 206                         "lock   %0, @%2;        \n\t"
 207                         "unlock %1, @%2;        \n\t"
 208                         : "=&r" (tmp) : "r" (x), "r" (ptr)
 209                         : "memory"
 210 #ifdef CONFIG_CHIP_M32700_TS1
 211                         , "r4"
 212 #endif  /* CONFIG_CHIP_M32700_TS1 */
 213                 );
 214                 break;
 215         default:
 216                 __xchg_called_with_bad_pointer();
 217 #endif  /* CONFIG_SMP */
 218         }
 219
 220         local_irq_restore(flags);
 221
 222         return (tmp);
 223 }
 224
 225 #define __HAVE_ARCH_CMPXCHG     1
 226
 227 static __inline__ unsigned long
 228 __cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
 229 {
 230         unsigned long flags;
 231         unsigned int retval;
 232
 233         local_irq_save(flags);
 234         __asm__ __volatile__ (
 235                         DCACHE_CLEAR("%0", "r4", "%1")
 236                         M32R_LOCK" %0, @%1;     \n"
 237                 "       bne     %0, %2, 1f;     \n"
 238                         M32R_UNLOCK" %3, @%1;   \n"
 239                 "       bra     2f;             \n"
 240                 "       .fillinsn               \n"
 241                 "1:"
 242                         M32R_UNLOCK" %2, @%1;   \n"
 243                 "       .fillinsn               \n"
 244                 "2:"
 245                         : "=&r" (retval)
 246                         : "r" (p), "r" (old), "r" (new)
 247                         : "cbit", "memory"
 248 #ifdef CONFIG_CHIP_M32700_TS1
 249                         , "r4"
 250 #endif  /* CONFIG_CHIP_M32700_TS1 */
 251                 );
 252         local_irq_restore(flags);
 253
 254         return retval;
 255 }
 256
 257 /* This function doesn't exist, so you'll get a linker error
 258    if something tries to do an invalid cmpxchg().  */
 259 extern void __cmpxchg_called_with_bad_pointer(void);
 260
 261 static __inline__ unsigned long
 262 __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 263 {
 264         switch (size) {
 265         case 4:
 266                 return __cmpxchg_u32(ptr, old, new);
 267 #if 0   /* we don't have __cmpxchg_u64 */
 268         case 8:
 269                 return __cmpxchg_u64(ptr, old, new);
 270 #endif /* 0 */
 271         }
 272         __cmpxchg_called_with_bad_pointer();
 273         return old;
 274 }
 275
 276 #define cmpxchg(ptr,o,n)                                                 \
 277   ({                                                                     \
 278      __typeof__(*(ptr)) _o_ = (o);                                       \
 279      __typeof__(*(ptr)) _n_ = (n);                                       \
 280      (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,           \
 281                                     (unsigned long)_n_, sizeof(*(ptr))); \
 282   })
 283
 284 #endif  /* __KERNEL__ */
 285
 286 /*
 287  * Memory barrier.
 288  *
 289  * mb() prevents loads and stores being reordered across this point.
 290  * rmb() prevents loads being reordered across this point.
 291  * wmb() prevents stores being reordered across this point.
 292  */
 293 #define mb()   barrier()
 294 #define rmb()  mb()
 295 #define wmb()  mb()
 296
 297 /**
 298  * read_barrier_depends - Flush all pending reads that subsequents reads
 299  * depend on.
 300  *
 301  * No data-dependent reads from memory-like regions are ever reordered
 302  * over this barrier.  All reads preceding this primitive are guaranteed
 303  * to access memory (but not necessarily other CPUs' caches) before any
 304  * reads following this primitive that depend on the data return by
 305  * any of the preceding reads.  This primitive is much lighter weight than
 306  * rmb() on most CPUs, and is never heavier weight than is
 307  * rmb().
 308  *
 309  * These ordering constraints are respected by both the local CPU
 310  * and the compiler.
 311  *
 312  * Ordering is not guaranteed by anything other than these primitives,
 313  * not even by data dependencies.  See the documentation for
 314  * memory_barrier() for examples and URLs to more information.
 315  *
 316  * For example, the following code would force ordering (the initial
 317  * value of "a" is zero, "b" is one, and "p" is "&a"):
 318  *
 319  * <programlisting>
 320  *      CPU 0                           CPU 1
 321  *
 322  *      b = 2;
 323  *      memory_barrier();
 324  *      p = &b;                         q = p;
 325  *                                      read_barrier_depends();
 326  *                                      d = *q;
 327  * </programlisting>
 328  *
 329  *
 330  * because the read of "*q" depends on the read of "p" and these
 331  * two reads are separated by a read_barrier_depends().  However,
 332  * the following code, with the same initial values for "a" and "b":
 333  *
 334  * <programlisting>
 335  *      CPU 0                           CPU 1
 336  *
 337  *      a = 2;
 338  *      memory_barrier();
 339  *      b = 3;                          y = b;
 340  *                                      read_barrier_depends();
 341  *                                      x = a;
 342  * </programlisting>
 343  *
 344  * does not enforce ordering, since there is no data dependency between
 345  * the read of "a" and the read of "b".  Therefore, on some CPUs, such
 346  * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
 347  * in cases like thiswhere there are no data dependencies.
 348  **/
 349
 350 #define read_barrier_depends()  do { } while (0)
 351
 352 #ifdef CONFIG_SMP
 353 #define smp_mb()        mb()
 354 #define smp_rmb()       rmb()
 355 #define smp_wmb()       wmb()
 356 #define smp_read_barrier_depends()      read_barrier_depends()
 357 #else
 358 #define smp_mb()        barrier()
 359 #define smp_rmb()       barrier()
 360 #define smp_wmb()       barrier()
 361 #define smp_read_barrier_depends()      do { } while (0)
 362 #endif
 363
 364 #define set_mb(var, value) do { xchg(&var, value); } while (0)
 365 #define set_wmb(var, value) do { var = value; wmb(); } while (0)
 366
 367 #define arch_align_stack(x) (x)
 368
 369 #endif  /* _ASM_M32R_SYSTEM_H */