Add linux-next specific files for 20110615
[linux-2.6/next.git] / sound / usb / quirks.c
blob090e1930dfdcc6b37c68b7731e0862cb703a7689
1 /*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 #include <linux/init.h>
18 #include <linux/slab.h>
19 #include <linux/usb.h>
20 #include <linux/usb/audio.h>
22 #include <sound/control.h>
23 #include <sound/core.h>
24 #include <sound/info.h>
25 #include <sound/pcm.h>
27 #include "usbaudio.h"
28 #include "card.h"
29 #include "mixer.h"
30 #include "mixer_quirks.h"
31 #include "midi.h"
32 #include "quirks.h"
33 #include "helper.h"
34 #include "endpoint.h"
35 #include "pcm.h"
36 #include "clock.h"
39 * handle the quirks for the contained interfaces
41 static int create_composite_quirk(struct snd_usb_audio *chip,
42 struct usb_interface *iface,
43 struct usb_driver *driver,
44 const struct snd_usb_audio_quirk *quirk)
46 int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
47 int err;
49 for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) {
50 iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
51 if (!iface)
52 continue;
53 if (quirk->ifnum != probed_ifnum &&
54 usb_interface_claimed(iface))
55 continue;
56 err = snd_usb_create_quirk(chip, iface, driver, quirk);
57 if (err < 0)
58 return err;
59 if (quirk->ifnum != probed_ifnum)
60 usb_driver_claim_interface(driver, iface, (void *)-1L);
62 return 0;
65 static int ignore_interface_quirk(struct snd_usb_audio *chip,
66 struct usb_interface *iface,
67 struct usb_driver *driver,
68 const struct snd_usb_audio_quirk *quirk)
70 return 0;
75 * Allow alignment on audio sub-slot (channel samples) rather than
76 * on audio slots (audio frames)
78 static int create_align_transfer_quirk(struct snd_usb_audio *chip,
79 struct usb_interface *iface,
80 struct usb_driver *driver,
81 const struct snd_usb_audio_quirk *quirk)
83 chip->txfr_quirk = 1;
84 return 1; /* Continue with creating streams and mixer */
87 static int create_any_midi_quirk(struct snd_usb_audio *chip,
88 struct usb_interface *intf,
89 struct usb_driver *driver,
90 const struct snd_usb_audio_quirk *quirk)
92 return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
96 * create a stream for an interface with proper descriptors
98 static int create_standard_audio_quirk(struct snd_usb_audio *chip,
99 struct usb_interface *iface,
100 struct usb_driver *driver,
101 const struct snd_usb_audio_quirk *quirk)
103 struct usb_host_interface *alts;
104 struct usb_interface_descriptor *altsd;
105 int err;
107 alts = &iface->altsetting[0];
108 altsd = get_iface_desc(alts);
109 err = snd_usb_parse_audio_endpoints(chip, altsd->bInterfaceNumber);
110 if (err < 0) {
111 snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
112 altsd->bInterfaceNumber, err);
113 return err;
115 /* reset the current interface */
116 usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
117 return 0;
121 * create a stream for an endpoint/altsetting without proper descriptors
123 static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
124 struct usb_interface *iface,
125 struct usb_driver *driver,
126 const struct snd_usb_audio_quirk *quirk)
128 struct audioformat *fp;
129 struct usb_host_interface *alts;
130 int stream, err;
131 unsigned *rate_table = NULL;
133 fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
134 if (! fp) {
135 snd_printk(KERN_ERR "cannot memdup\n");
136 return -ENOMEM;
138 if (fp->nr_rates > 0) {
139 rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
140 if (!rate_table) {
141 kfree(fp);
142 return -ENOMEM;
144 memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
145 fp->rate_table = rate_table;
148 stream = (fp->endpoint & USB_DIR_IN)
149 ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
150 err = snd_usb_add_audio_endpoint(chip, stream, fp);
151 if (err < 0) {
152 kfree(fp);
153 kfree(rate_table);
154 return err;
156 if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
157 fp->altset_idx >= iface->num_altsetting) {
158 kfree(fp);
159 kfree(rate_table);
160 return -EINVAL;
162 alts = &iface->altsetting[fp->altset_idx];
163 fp->datainterval = snd_usb_parse_datainterval(chip, alts);
164 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
165 usb_set_interface(chip->dev, fp->iface, 0);
166 snd_usb_init_pitch(chip, fp->iface, alts, fp);
167 snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
168 return 0;
172 * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
173 * The only way to detect the sample rate is by looking at wMaxPacketSize.
175 static int create_uaxx_quirk(struct snd_usb_audio *chip,
176 struct usb_interface *iface,
177 struct usb_driver *driver,
178 const struct snd_usb_audio_quirk *quirk)
180 static const struct audioformat ua_format = {
181 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
182 .channels = 2,
183 .fmt_type = UAC_FORMAT_TYPE_I,
184 .altsetting = 1,
185 .altset_idx = 1,
186 .rates = SNDRV_PCM_RATE_CONTINUOUS,
188 struct usb_host_interface *alts;
189 struct usb_interface_descriptor *altsd;
190 struct audioformat *fp;
191 int stream, err;
193 /* both PCM and MIDI interfaces have 2 or more altsettings */
194 if (iface->num_altsetting < 2)
195 return -ENXIO;
196 alts = &iface->altsetting[1];
197 altsd = get_iface_desc(alts);
199 if (altsd->bNumEndpoints == 2) {
200 static const struct snd_usb_midi_endpoint_info ua700_ep = {
201 .out_cables = 0x0003,
202 .in_cables = 0x0003
204 static const struct snd_usb_audio_quirk ua700_quirk = {
205 .type = QUIRK_MIDI_FIXED_ENDPOINT,
206 .data = &ua700_ep
208 static const struct snd_usb_midi_endpoint_info uaxx_ep = {
209 .out_cables = 0x0001,
210 .in_cables = 0x0001
212 static const struct snd_usb_audio_quirk uaxx_quirk = {
213 .type = QUIRK_MIDI_FIXED_ENDPOINT,
214 .data = &uaxx_ep
216 const struct snd_usb_audio_quirk *quirk =
217 chip->usb_id == USB_ID(0x0582, 0x002b)
218 ? &ua700_quirk : &uaxx_quirk;
219 return snd_usbmidi_create(chip->card, iface,
220 &chip->midi_list, quirk);
223 if (altsd->bNumEndpoints != 1)
224 return -ENXIO;
226 fp = kmalloc(sizeof(*fp), GFP_KERNEL);
227 if (!fp)
228 return -ENOMEM;
229 memcpy(fp, &ua_format, sizeof(*fp));
231 fp->iface = altsd->bInterfaceNumber;
232 fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
233 fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
234 fp->datainterval = 0;
235 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
237 switch (fp->maxpacksize) {
238 case 0x120:
239 fp->rate_max = fp->rate_min = 44100;
240 break;
241 case 0x138:
242 case 0x140:
243 fp->rate_max = fp->rate_min = 48000;
244 break;
245 case 0x258:
246 case 0x260:
247 fp->rate_max = fp->rate_min = 96000;
248 break;
249 default:
250 snd_printk(KERN_ERR "unknown sample rate\n");
251 kfree(fp);
252 return -ENXIO;
255 stream = (fp->endpoint & USB_DIR_IN)
256 ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
257 err = snd_usb_add_audio_endpoint(chip, stream, fp);
258 if (err < 0) {
259 kfree(fp);
260 return err;
262 usb_set_interface(chip->dev, fp->iface, 0);
263 return 0;
267 * Create a standard mixer for the specified interface.
269 static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
270 struct usb_interface *iface,
271 struct usb_driver *driver,
272 const struct snd_usb_audio_quirk *quirk)
274 if (quirk->ifnum < 0)
275 return 0;
277 return snd_usb_create_mixer(chip, quirk->ifnum, 0);
281 * audio-interface quirks
283 * returns zero if no standard audio/MIDI parsing is needed.
284 * returns a positive value if standard audio/midi interfaces are parsed
285 * after this.
286 * returns a negative value at error.
288 int snd_usb_create_quirk(struct snd_usb_audio *chip,
289 struct usb_interface *iface,
290 struct usb_driver *driver,
291 const struct snd_usb_audio_quirk *quirk)
293 typedef int (*quirk_func_t)(struct snd_usb_audio *,
294 struct usb_interface *,
295 struct usb_driver *,
296 const struct snd_usb_audio_quirk *);
297 static const quirk_func_t quirk_funcs[] = {
298 [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
299 [QUIRK_COMPOSITE] = create_composite_quirk,
300 [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
301 [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
302 [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
303 [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
304 [QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
305 [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
306 [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
307 [QUIRK_MIDI_CME] = create_any_midi_quirk,
308 [QUIRK_MIDI_AKAI] = create_any_midi_quirk,
309 [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
310 [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
311 [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
312 [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
313 [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
316 if (quirk->type < QUIRK_TYPE_COUNT) {
317 return quirk_funcs[quirk->type](chip, iface, driver, quirk);
318 } else {
319 snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
320 return -ENXIO;
325 * boot quirks
328 #define EXTIGY_FIRMWARE_SIZE_OLD 794
329 #define EXTIGY_FIRMWARE_SIZE_NEW 483
331 static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
333 struct usb_host_config *config = dev->actconfig;
334 int err;
336 if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
337 le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
338 snd_printdd("sending Extigy boot sequence...\n");
339 /* Send message to force it to reconnect with full interface. */
340 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
341 0x10, 0x43, 0x0001, 0x000a, NULL, 0, 1000);
342 if (err < 0) snd_printdd("error sending boot message: %d\n", err);
343 err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
344 &dev->descriptor, sizeof(dev->descriptor));
345 config = dev->actconfig;
346 if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
347 err = usb_reset_configuration(dev);
348 if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
349 snd_printdd("extigy_boot: new boot length = %d\n",
350 le16_to_cpu(get_cfg_desc(config)->wTotalLength));
351 return -ENODEV; /* quit this anyway */
353 return 0;
356 static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
358 u8 buf = 1;
360 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
361 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
362 0, 0, &buf, 1, 1000);
363 if (buf == 0) {
364 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
365 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
366 1, 2000, NULL, 0, 1000);
367 return -ENODEV;
369 return 0;
373 * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
374 * documented in the device's data sheet.
376 static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
378 u8 buf[4];
379 buf[0] = 0x20;
380 buf[1] = value & 0xff;
381 buf[2] = (value >> 8) & 0xff;
382 buf[3] = reg;
383 return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
384 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
385 0, 0, &buf, 4, 1000);
388 static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
391 * Enable line-out driver mode, set headphone source to front
392 * channels, enable stereo mic.
394 return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
398 * C-Media CM6206 is based on CM106 with two additional
399 * registers that are not documented in the data sheet.
400 * Values here are chosen based on sniffing USB traffic
401 * under Windows.
403 static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
405 int err, reg;
406 int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
408 for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
409 err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
410 if (err < 0)
411 return err;
414 return err;
418 * This call will put the synth in "USB send" mode, i.e it will send MIDI
419 * messages through USB (this is disabled at startup). The synth will
420 * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
421 * sign on its LCD. Values here are chosen based on sniffing USB traffic
422 * under Windows.
424 static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
426 int err, actual_length;
428 /* "midi send" enable */
429 static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
431 void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
432 if (!buf)
433 return -ENOMEM;
434 err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
435 ARRAY_SIZE(seq), &actual_length, 1000);
436 kfree(buf);
437 if (err < 0)
438 return err;
440 return 0;
444 * Some sound cards from Native Instruments are in fact compliant to the USB
445 * audio standard of version 2 and other approved USB standards, even though
446 * they come up as vendor-specific device when first connected.
448 * However, they can be told to come up with a new set of descriptors
449 * upon their next enumeration, and the interfaces announced by the new
450 * descriptors will then be handled by the kernel's class drivers. As the
451 * product ID will also change, no further checks are required.
454 static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
456 int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
457 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
458 cpu_to_le16(1), 0, NULL, 0, 1000);
460 if (ret < 0)
461 return ret;
463 usb_reset_device(dev);
465 /* return -EAGAIN, so the creation of an audio interface for this
466 * temporary device is aborted. The device will reconnect with a
467 * new product ID */
468 return -EAGAIN;
472 * Setup quirks
474 #define AUDIOPHILE_SET 0x01 /* if set, parse device_setup */
475 #define AUDIOPHILE_SET_DTS 0x02 /* if set, enable DTS Digital Output */
476 #define AUDIOPHILE_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
477 #define AUDIOPHILE_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
478 #define AUDIOPHILE_SET_DI 0x10 /* if set, enable Digital Input */
479 #define AUDIOPHILE_SET_MASK 0x1F /* bit mask for setup value */
480 #define AUDIOPHILE_SET_24B_48K_DI 0x19 /* value for 24bits+48KHz+Digital Input */
481 #define AUDIOPHILE_SET_24B_48K_NOTDI 0x09 /* value for 24bits+48KHz+No Digital Input */
482 #define AUDIOPHILE_SET_16B_48K_DI 0x11 /* value for 16bits+48KHz+Digital Input */
483 #define AUDIOPHILE_SET_16B_48K_NOTDI 0x01 /* value for 16bits+48KHz+No Digital Input */
485 static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
486 int iface,
487 int altno)
489 /* Reset ALL ifaces to 0 altsetting.
490 * Call it for every possible altsetting of every interface.
492 usb_set_interface(chip->dev, iface, 0);
494 if (chip->setup & AUDIOPHILE_SET) {
495 if ((chip->setup & AUDIOPHILE_SET_DTS)
496 && altno != 6)
497 return 1; /* skip this altsetting */
498 if ((chip->setup & AUDIOPHILE_SET_96K)
499 && altno != 1)
500 return 1; /* skip this altsetting */
501 if ((chip->setup & AUDIOPHILE_SET_MASK) ==
502 AUDIOPHILE_SET_24B_48K_DI && altno != 2)
503 return 1; /* skip this altsetting */
504 if ((chip->setup & AUDIOPHILE_SET_MASK) ==
505 AUDIOPHILE_SET_24B_48K_NOTDI && altno != 3)
506 return 1; /* skip this altsetting */
507 if ((chip->setup & AUDIOPHILE_SET_MASK) ==
508 AUDIOPHILE_SET_16B_48K_DI && altno != 4)
509 return 1; /* skip this altsetting */
510 if ((chip->setup & AUDIOPHILE_SET_MASK) ==
511 AUDIOPHILE_SET_16B_48K_NOTDI && altno != 5)
512 return 1; /* skip this altsetting */
515 return 0; /* keep this altsetting */
518 int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
519 int iface,
520 int altno)
522 /* audiophile usb: skip altsets incompatible with device_setup */
523 if (chip->usb_id == USB_ID(0x0763, 0x2003))
524 return audiophile_skip_setting_quirk(chip, iface, altno);
526 return 0;
529 int snd_usb_apply_boot_quirk(struct usb_device *dev,
530 struct usb_interface *intf,
531 const struct snd_usb_audio_quirk *quirk)
533 u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
534 le16_to_cpu(dev->descriptor.idProduct));
536 switch (id) {
537 case USB_ID(0x041e, 0x3000):
538 /* SB Extigy needs special boot-up sequence */
539 /* if more models come, this will go to the quirk list. */
540 return snd_usb_extigy_boot_quirk(dev, intf);
542 case USB_ID(0x041e, 0x3020):
543 /* SB Audigy 2 NX needs its own boot-up magic, too */
544 return snd_usb_audigy2nx_boot_quirk(dev);
546 case USB_ID(0x10f5, 0x0200):
547 /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
548 return snd_usb_cm106_boot_quirk(dev);
550 case USB_ID(0x0d8c, 0x0102):
551 /* C-Media CM6206 / CM106-Like Sound Device */
552 case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
553 return snd_usb_cm6206_boot_quirk(dev);
555 case USB_ID(0x133e, 0x0815):
556 /* Access Music VirusTI Desktop */
557 return snd_usb_accessmusic_boot_quirk(dev);
559 case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
560 case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
561 case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
562 return snd_usb_nativeinstruments_boot_quirk(dev);
565 return 0;
569 * check if the device uses big-endian samples
571 int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
573 switch (chip->usb_id) {
574 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
575 if (fp->endpoint & USB_DIR_IN)
576 return 1;
577 break;
578 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
579 if (chip->setup == 0x00 ||
580 fp->altsetting==1 || fp->altsetting==2 || fp->altsetting==3)
581 return 1;
583 return 0;
587 * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
588 * not for interface.
591 enum {
592 EMU_QUIRK_SR_44100HZ = 0,
593 EMU_QUIRK_SR_48000HZ,
594 EMU_QUIRK_SR_88200HZ,
595 EMU_QUIRK_SR_96000HZ,
596 EMU_QUIRK_SR_176400HZ,
597 EMU_QUIRK_SR_192000HZ
600 static void set_format_emu_quirk(struct snd_usb_substream *subs,
601 struct audioformat *fmt)
603 unsigned char emu_samplerate_id = 0;
605 /* When capture is active
606 * sample rate shouldn't be changed
607 * by playback substream
609 if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
610 if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
611 return;
614 switch (fmt->rate_min) {
615 case 48000:
616 emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
617 break;
618 case 88200:
619 emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
620 break;
621 case 96000:
622 emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
623 break;
624 case 176400:
625 emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
626 break;
627 case 192000:
628 emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
629 break;
630 default:
631 emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
632 break;
634 snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
637 void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
638 struct audioformat *fmt)
640 switch (subs->stream->chip->usb_id) {
641 case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
642 case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
643 case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
644 case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
645 set_format_emu_quirk(subs, fmt);
646 break;