Linux 2.6.25-rc4
[linux-2.6/next.git] / arch / alpha / kernel / sys_dp264.c
blobc71b0fd7a61f8748b857463c03854006ec5b91a1
1 /*
2 * linux/arch/alpha/kernel/sys_dp264.c
4 * Copyright (C) 1995 David A Rusling
5 * Copyright (C) 1996, 1999 Jay A Estabrook
6 * Copyright (C) 1998, 1999 Richard Henderson
8 * Modified by Christopher C. Chimelis, 2001 to
9 * add support for the addition of Shark to the
10 * Tsunami family.
12 * Code supporting the DP264 (EV6+TSUNAMI).
15 #include <linux/kernel.h>
16 #include <linux/types.h>
17 #include <linux/mm.h>
18 #include <linux/sched.h>
19 #include <linux/pci.h>
20 #include <linux/init.h>
21 #include <linux/bitops.h>
23 #include <asm/ptrace.h>
24 #include <asm/system.h>
25 #include <asm/dma.h>
26 #include <asm/irq.h>
27 #include <asm/mmu_context.h>
28 #include <asm/io.h>
29 #include <asm/pgtable.h>
30 #include <asm/core_tsunami.h>
31 #include <asm/hwrpb.h>
32 #include <asm/tlbflush.h>
34 #include "proto.h"
35 #include "irq_impl.h"
36 #include "pci_impl.h"
37 #include "machvec_impl.h"
40 /* Note mask bit is true for ENABLED irqs. */
41 static unsigned long cached_irq_mask;
42 /* dp264 boards handle at max four CPUs */
43 static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
45 DEFINE_SPINLOCK(dp264_irq_lock);
47 static void
48 tsunami_update_irq_hw(unsigned long mask)
50 register tsunami_cchip *cchip = TSUNAMI_cchip;
51 unsigned long isa_enable = 1UL << 55;
52 register int bcpu = boot_cpuid;
54 #ifdef CONFIG_SMP
55 volatile unsigned long *dim0, *dim1, *dim2, *dim3;
56 unsigned long mask0, mask1, mask2, mask3, dummy;
58 mask &= ~isa_enable;
59 mask0 = mask & cpu_irq_affinity[0];
60 mask1 = mask & cpu_irq_affinity[1];
61 mask2 = mask & cpu_irq_affinity[2];
62 mask3 = mask & cpu_irq_affinity[3];
64 if (bcpu == 0) mask0 |= isa_enable;
65 else if (bcpu == 1) mask1 |= isa_enable;
66 else if (bcpu == 2) mask2 |= isa_enable;
67 else mask3 |= isa_enable;
69 dim0 = &cchip->dim0.csr;
70 dim1 = &cchip->dim1.csr;
71 dim2 = &cchip->dim2.csr;
72 dim3 = &cchip->dim3.csr;
73 if (!cpu_possible(0)) dim0 = &dummy;
74 if (!cpu_possible(1)) dim1 = &dummy;
75 if (!cpu_possible(2)) dim2 = &dummy;
76 if (!cpu_possible(3)) dim3 = &dummy;
78 *dim0 = mask0;
79 *dim1 = mask1;
80 *dim2 = mask2;
81 *dim3 = mask3;
82 mb();
83 *dim0;
84 *dim1;
85 *dim2;
86 *dim3;
87 #else
88 volatile unsigned long *dimB;
89 if (bcpu == 0) dimB = &cchip->dim0.csr;
90 else if (bcpu == 1) dimB = &cchip->dim1.csr;
91 else if (bcpu == 2) dimB = &cchip->dim2.csr;
92 else dimB = &cchip->dim3.csr;
94 *dimB = mask | isa_enable;
95 mb();
96 *dimB;
97 #endif
100 static void
101 dp264_enable_irq(unsigned int irq)
103 spin_lock(&dp264_irq_lock);
104 cached_irq_mask |= 1UL << irq;
105 tsunami_update_irq_hw(cached_irq_mask);
106 spin_unlock(&dp264_irq_lock);
109 static void
110 dp264_disable_irq(unsigned int irq)
112 spin_lock(&dp264_irq_lock);
113 cached_irq_mask &= ~(1UL << irq);
114 tsunami_update_irq_hw(cached_irq_mask);
115 spin_unlock(&dp264_irq_lock);
118 static unsigned int
119 dp264_startup_irq(unsigned int irq)
121 dp264_enable_irq(irq);
122 return 0; /* never anything pending */
125 static void
126 dp264_end_irq(unsigned int irq)
128 if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
129 dp264_enable_irq(irq);
132 static void
133 clipper_enable_irq(unsigned int irq)
135 spin_lock(&dp264_irq_lock);
136 cached_irq_mask |= 1UL << (irq - 16);
137 tsunami_update_irq_hw(cached_irq_mask);
138 spin_unlock(&dp264_irq_lock);
141 static void
142 clipper_disable_irq(unsigned int irq)
144 spin_lock(&dp264_irq_lock);
145 cached_irq_mask &= ~(1UL << (irq - 16));
146 tsunami_update_irq_hw(cached_irq_mask);
147 spin_unlock(&dp264_irq_lock);
150 static unsigned int
151 clipper_startup_irq(unsigned int irq)
153 clipper_enable_irq(irq);
154 return 0; /* never anything pending */
157 static void
158 clipper_end_irq(unsigned int irq)
160 if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
161 clipper_enable_irq(irq);
164 static void
165 cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
167 int cpu;
169 for (cpu = 0; cpu < 4; cpu++) {
170 unsigned long aff = cpu_irq_affinity[cpu];
171 if (cpu_isset(cpu, affinity))
172 aff |= 1UL << irq;
173 else
174 aff &= ~(1UL << irq);
175 cpu_irq_affinity[cpu] = aff;
179 static void
180 dp264_set_affinity(unsigned int irq, cpumask_t affinity)
182 spin_lock(&dp264_irq_lock);
183 cpu_set_irq_affinity(irq, affinity);
184 tsunami_update_irq_hw(cached_irq_mask);
185 spin_unlock(&dp264_irq_lock);
188 static void
189 clipper_set_affinity(unsigned int irq, cpumask_t affinity)
191 spin_lock(&dp264_irq_lock);
192 cpu_set_irq_affinity(irq - 16, affinity);
193 tsunami_update_irq_hw(cached_irq_mask);
194 spin_unlock(&dp264_irq_lock);
197 static struct hw_interrupt_type dp264_irq_type = {
198 .typename = "DP264",
199 .startup = dp264_startup_irq,
200 .shutdown = dp264_disable_irq,
201 .enable = dp264_enable_irq,
202 .disable = dp264_disable_irq,
203 .ack = dp264_disable_irq,
204 .end = dp264_end_irq,
205 .set_affinity = dp264_set_affinity,
208 static struct hw_interrupt_type clipper_irq_type = {
209 .typename = "CLIPPER",
210 .startup = clipper_startup_irq,
211 .shutdown = clipper_disable_irq,
212 .enable = clipper_enable_irq,
213 .disable = clipper_disable_irq,
214 .ack = clipper_disable_irq,
215 .end = clipper_end_irq,
216 .set_affinity = clipper_set_affinity,
219 static void
220 dp264_device_interrupt(unsigned long vector)
222 #if 1
223 printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n");
224 #else
225 unsigned long pld;
226 unsigned int i;
228 /* Read the interrupt summary register of TSUNAMI */
229 pld = TSUNAMI_cchip->dir0.csr;
232 * Now for every possible bit set, work through them and call
233 * the appropriate interrupt handler.
235 while (pld) {
236 i = ffz(~pld);
237 pld &= pld - 1; /* clear least bit set */
238 if (i == 55)
239 isa_device_interrupt(vector);
240 else
241 handle_irq(16 + i);
242 #if 0
243 TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
244 tmp = TSUNAMI_cchip->dir0.csr;
245 #endif
247 #endif
250 static void
251 dp264_srm_device_interrupt(unsigned long vector)
253 int irq;
255 irq = (vector - 0x800) >> 4;
258 * The SRM console reports PCI interrupts with a vector calculated by:
260 * 0x900 + (0x10 * DRIR-bit)
262 * So bit 16 shows up as IRQ 32, etc.
264 * On DP264/BRICK/MONET, we adjust it down by 16 because at least
265 * that many of the low order bits of the DRIR are not used, and
266 * so we don't count them.
268 if (irq >= 32)
269 irq -= 16;
271 handle_irq(irq);
274 static void
275 clipper_srm_device_interrupt(unsigned long vector)
277 int irq;
279 irq = (vector - 0x800) >> 4;
282 * The SRM console reports PCI interrupts with a vector calculated by:
284 * 0x900 + (0x10 * DRIR-bit)
286 * So bit 16 shows up as IRQ 32, etc.
288 * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
289 * to scale down the vector reported, we just use it.
291 * Eg IRQ 24 is DRIR bit 8, etc, etc
293 handle_irq(irq);
296 static void __init
297 init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax)
299 long i;
300 for (i = imin; i <= imax; ++i) {
301 irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
302 irq_desc[i].chip = ops;
306 static void __init
307 dp264_init_irq(void)
309 outb(0, DMA1_RESET_REG);
310 outb(0, DMA2_RESET_REG);
311 outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
312 outb(0, DMA2_MASK_REG);
314 if (alpha_using_srm)
315 alpha_mv.device_interrupt = dp264_srm_device_interrupt;
317 tsunami_update_irq_hw(0);
319 init_i8259a_irqs();
320 init_tsunami_irqs(&dp264_irq_type, 16, 47);
323 static void __init
324 clipper_init_irq(void)
326 outb(0, DMA1_RESET_REG);
327 outb(0, DMA2_RESET_REG);
328 outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
329 outb(0, DMA2_MASK_REG);
331 if (alpha_using_srm)
332 alpha_mv.device_interrupt = clipper_srm_device_interrupt;
334 tsunami_update_irq_hw(0);
336 init_i8259a_irqs();
337 init_tsunami_irqs(&clipper_irq_type, 24, 63);
342 * PCI Fixup configuration.
344 * Summary @ TSUNAMI_CSR_DIM0:
345 * Bit Meaning
346 * 0-17 Unused
347 *18 Interrupt SCSI B (Adaptec 7895 builtin)
348 *19 Interrupt SCSI A (Adaptec 7895 builtin)
349 *20 Interrupt Line D from slot 2 PCI0
350 *21 Interrupt Line C from slot 2 PCI0
351 *22 Interrupt Line B from slot 2 PCI0
352 *23 Interrupt Line A from slot 2 PCI0
353 *24 Interrupt Line D from slot 1 PCI0
354 *25 Interrupt Line C from slot 1 PCI0
355 *26 Interrupt Line B from slot 1 PCI0
356 *27 Interrupt Line A from slot 1 PCI0
357 *28 Interrupt Line D from slot 0 PCI0
358 *29 Interrupt Line C from slot 0 PCI0
359 *30 Interrupt Line B from slot 0 PCI0
360 *31 Interrupt Line A from slot 0 PCI0
362 *32 Interrupt Line D from slot 3 PCI1
363 *33 Interrupt Line C from slot 3 PCI1
364 *34 Interrupt Line B from slot 3 PCI1
365 *35 Interrupt Line A from slot 3 PCI1
366 *36 Interrupt Line D from slot 2 PCI1
367 *37 Interrupt Line C from slot 2 PCI1
368 *38 Interrupt Line B from slot 2 PCI1
369 *39 Interrupt Line A from slot 2 PCI1
370 *40 Interrupt Line D from slot 1 PCI1
371 *41 Interrupt Line C from slot 1 PCI1
372 *42 Interrupt Line B from slot 1 PCI1
373 *43 Interrupt Line A from slot 1 PCI1
374 *44 Interrupt Line D from slot 0 PCI1
375 *45 Interrupt Line C from slot 0 PCI1
376 *46 Interrupt Line B from slot 0 PCI1
377 *47 Interrupt Line A from slot 0 PCI1
378 *48-52 Unused
379 *53 PCI0 NMI (from Cypress)
380 *54 PCI0 SMI INT (from Cypress)
381 *55 PCI0 ISA Interrupt (from Cypress)
382 *56-60 Unused
383 *61 PCI1 Bus Error
384 *62 PCI0 Bus Error
385 *63 Reserved
387 * IdSel
388 * 5 Cypress Bridge I/O
389 * 6 SCSI Adaptec builtin
390 * 7 64 bit PCI option slot 0 (all busses)
391 * 8 64 bit PCI option slot 1 (all busses)
392 * 9 64 bit PCI option slot 2 (all busses)
393 * 10 64 bit PCI option slot 3 (not bus 0)
396 static int __init
397 isa_irq_fixup(struct pci_dev *dev, int irq)
399 u8 irq8;
401 if (irq > 0)
402 return irq;
404 /* This interrupt is routed via ISA bridge, so we'll
405 just have to trust whatever value the console might
406 have assigned. */
407 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
409 return irq8 & 0xf;
412 static int __init
413 dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
415 static char irq_tab[6][5] __initdata = {
416 /*INT INTA INTB INTC INTD */
417 { -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */
418 { 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
419 { 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
420 { 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
421 { 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
422 { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */
424 const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
425 struct pci_controller *hose = dev->sysdata;
426 int irq = COMMON_TABLE_LOOKUP;
428 if (irq > 0)
429 irq += 16 * hose->index;
431 return isa_irq_fixup(dev, irq);
434 static int __init
435 monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
437 static char irq_tab[13][5] __initdata = {
438 /*INT INTA INTB INTC INTD */
439 { 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */
440 { -1, -1, -1, -1, -1}, /* IdSel 4 unused */
441 { -1, -1, -1, -1, -1}, /* IdSel 5 unused */
442 { 47, 47, 47, 47, 47}, /* IdSel 6 SCSI PCI1 */
443 { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
444 { -1, -1, -1, -1, -1}, /* IdSel 8 P2P PCI1 */
445 #if 1
446 { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/
447 { 24, 24, 25, 26, 27}, /* IdSel 15 slot 5 PCI2*/
448 #else
449 { -1, -1, -1, -1, -1}, /* IdSel 9 unused */
450 { -1, -1, -1, -1, -1}, /* IdSel 10 unused */
451 #endif
452 { 40, 40, 41, 42, 43}, /* IdSel 11 slot 1 PCI0*/
453 { 36, 36, 37, 38, 39}, /* IdSel 12 slot 2 PCI0*/
454 { 32, 32, 33, 34, 35}, /* IdSel 13 slot 3 PCI0*/
455 { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/
456 { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/
458 const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
460 return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
463 static u8 __init
464 monet_swizzle(struct pci_dev *dev, u8 *pinp)
466 struct pci_controller *hose = dev->sysdata;
467 int slot, pin = *pinp;
469 if (!dev->bus->parent) {
470 slot = PCI_SLOT(dev->devfn);
472 /* Check for the built-in bridge on hose 1. */
473 else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
474 slot = PCI_SLOT(dev->devfn);
475 } else {
476 /* Must be a card-based bridge. */
477 do {
478 /* Check for built-in bridge on hose 1. */
479 if (hose->index == 1 &&
480 PCI_SLOT(dev->bus->self->devfn) == 8) {
481 slot = PCI_SLOT(dev->devfn);
482 break;
484 pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
486 /* Move up the chain of bridges. */
487 dev = dev->bus->self;
488 /* Slot of the next bridge. */
489 slot = PCI_SLOT(dev->devfn);
490 } while (dev->bus->self);
492 *pinp = pin;
493 return slot;
496 static int __init
497 webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
499 static char irq_tab[13][5] __initdata = {
500 /*INT INTA INTB INTC INTD */
501 { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
502 { -1, -1, -1, -1, -1}, /* IdSel 8 unused */
503 { 29, 29, 29, 29, 29}, /* IdSel 9 21143 #1 */
504 { -1, -1, -1, -1, -1}, /* IdSel 10 unused */
505 { 30, 30, 30, 30, 30}, /* IdSel 11 21143 #2 */
506 { -1, -1, -1, -1, -1}, /* IdSel 12 unused */
507 { -1, -1, -1, -1, -1}, /* IdSel 13 unused */
508 { 35, 35, 34, 33, 32}, /* IdSel 14 slot 0 */
509 { 39, 39, 38, 37, 36}, /* IdSel 15 slot 1 */
510 { 43, 43, 42, 41, 40}, /* IdSel 16 slot 2 */
511 { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */
513 const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
515 return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
518 static int __init
519 clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
521 static char irq_tab[7][5] __initdata = {
522 /*INT INTA INTB INTC INTD */
523 { 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
524 { 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
525 { 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
526 { 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
527 { 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
528 { 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
529 { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */
531 const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
532 struct pci_controller *hose = dev->sysdata;
533 int irq = COMMON_TABLE_LOOKUP;
535 if (irq > 0)
536 irq += 16 * hose->index;
538 return isa_irq_fixup(dev, irq);
541 static void __init
542 dp264_init_pci(void)
544 common_init_pci();
545 SMC669_Init(0);
546 locate_and_init_vga(NULL);
549 static void __init
550 monet_init_pci(void)
552 common_init_pci();
553 SMC669_Init(1);
554 es1888_init();
555 locate_and_init_vga(NULL);
558 static void __init
559 clipper_init_pci(void)
561 common_init_pci();
562 locate_and_init_vga(NULL);
565 static void __init
566 webbrick_init_arch(void)
568 tsunami_init_arch();
570 /* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
571 hose_head->sg_isa->align_entry = 4;
572 hose_head->sg_pci->align_entry = 4;
577 * The System Vectors
580 struct alpha_machine_vector dp264_mv __initmv = {
581 .vector_name = "DP264",
582 DO_EV6_MMU,
583 DO_DEFAULT_RTC,
584 DO_TSUNAMI_IO,
585 .machine_check = tsunami_machine_check,
586 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
587 .min_io_address = DEFAULT_IO_BASE,
588 .min_mem_address = DEFAULT_MEM_BASE,
589 .pci_dac_offset = TSUNAMI_DAC_OFFSET,
591 .nr_irqs = 64,
592 .device_interrupt = dp264_device_interrupt,
594 .init_arch = tsunami_init_arch,
595 .init_irq = dp264_init_irq,
596 .init_rtc = common_init_rtc,
597 .init_pci = dp264_init_pci,
598 .kill_arch = tsunami_kill_arch,
599 .pci_map_irq = dp264_map_irq,
600 .pci_swizzle = common_swizzle,
602 ALIAS_MV(dp264)
604 struct alpha_machine_vector monet_mv __initmv = {
605 .vector_name = "Monet",
606 DO_EV6_MMU,
607 DO_DEFAULT_RTC,
608 DO_TSUNAMI_IO,
609 .machine_check = tsunami_machine_check,
610 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
611 .min_io_address = DEFAULT_IO_BASE,
612 .min_mem_address = DEFAULT_MEM_BASE,
613 .pci_dac_offset = TSUNAMI_DAC_OFFSET,
615 .nr_irqs = 64,
616 .device_interrupt = dp264_device_interrupt,
618 .init_arch = tsunami_init_arch,
619 .init_irq = dp264_init_irq,
620 .init_rtc = common_init_rtc,
621 .init_pci = monet_init_pci,
622 .kill_arch = tsunami_kill_arch,
623 .pci_map_irq = monet_map_irq,
624 .pci_swizzle = monet_swizzle,
627 struct alpha_machine_vector webbrick_mv __initmv = {
628 .vector_name = "Webbrick",
629 DO_EV6_MMU,
630 DO_DEFAULT_RTC,
631 DO_TSUNAMI_IO,
632 .machine_check = tsunami_machine_check,
633 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
634 .min_io_address = DEFAULT_IO_BASE,
635 .min_mem_address = DEFAULT_MEM_BASE,
636 .pci_dac_offset = TSUNAMI_DAC_OFFSET,
638 .nr_irqs = 64,
639 .device_interrupt = dp264_device_interrupt,
641 .init_arch = webbrick_init_arch,
642 .init_irq = dp264_init_irq,
643 .init_rtc = common_init_rtc,
644 .init_pci = common_init_pci,
645 .kill_arch = tsunami_kill_arch,
646 .pci_map_irq = webbrick_map_irq,
647 .pci_swizzle = common_swizzle,
650 struct alpha_machine_vector clipper_mv __initmv = {
651 .vector_name = "Clipper",
652 DO_EV6_MMU,
653 DO_DEFAULT_RTC,
654 DO_TSUNAMI_IO,
655 .machine_check = tsunami_machine_check,
656 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
657 .min_io_address = DEFAULT_IO_BASE,
658 .min_mem_address = DEFAULT_MEM_BASE,
659 .pci_dac_offset = TSUNAMI_DAC_OFFSET,
661 .nr_irqs = 64,
662 .device_interrupt = dp264_device_interrupt,
664 .init_arch = tsunami_init_arch,
665 .init_irq = clipper_init_irq,
666 .init_rtc = common_init_rtc,
667 .init_pci = clipper_init_pci,
668 .kill_arch = tsunami_kill_arch,
669 .pci_map_irq = clipper_map_irq,
670 .pci_swizzle = common_swizzle,
673 /* Sharks strongly resemble Clipper, at least as far
674 * as interrupt routing, etc, so we're using the
675 * same functions as Clipper does
678 struct alpha_machine_vector shark_mv __initmv = {
679 .vector_name = "Shark",
680 DO_EV6_MMU,
681 DO_DEFAULT_RTC,
682 DO_TSUNAMI_IO,
683 .machine_check = tsunami_machine_check,
684 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
685 .min_io_address = DEFAULT_IO_BASE,
686 .min_mem_address = DEFAULT_MEM_BASE,
687 .pci_dac_offset = TSUNAMI_DAC_OFFSET,
689 .nr_irqs = 64,
690 .device_interrupt = dp264_device_interrupt,
692 .init_arch = tsunami_init_arch,
693 .init_irq = clipper_init_irq,
694 .init_rtc = common_init_rtc,
695 .init_pci = common_init_pci,
696 .kill_arch = tsunami_kill_arch,
697 .pci_map_irq = clipper_map_irq,
698 .pci_swizzle = common_swizzle,
701 /* No alpha_mv alias for webbrick/monet/clipper, since we compile them
702 in unconditionally with DP264; setup_arch knows how to cope. */