arch/ppc/syslib/ibm440gx_common.c

   1 /*
   2  * PPC440GX system library
   3  *
   4  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
   5  * Copyright (c) 2003 - 2006 Zultys Technologies
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  *
  12  */
  13 #include <linux/kernel.h>
  14 #include <linux/interrupt.h>
  15 #include <asm/ibm44x.h>
  16 #include <asm/mmu.h>
  17 #include <asm/processor.h>
  18 #include <syslib/ibm440gx_common.h>
  19
  20 /*
  21  * Calculate 440GX clocks
  22  */
  23 static inline u32 __fix_zero(u32 v, u32 def){
  24         return v ? v : def;
  25 }
  26
  27 void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
  28         unsigned int ser_clk)
  29 {
  30         u32 pllc  = CPR_READ(DCRN_CPR_PLLC);
  31         u32 plld  = CPR_READ(DCRN_CPR_PLLD);
  32         u32 uart0 = SDR_READ(DCRN_SDR_UART0);
  33         u32 uart1 = SDR_READ(DCRN_SDR_UART1);
  34 #ifdef CONFIG_440EP
  35         u32 uart2 = SDR_READ(DCRN_SDR_UART2);
  36         u32 uart3 = SDR_READ(DCRN_SDR_UART3);
  37 #endif
  38
  39         /* Dividers */
  40         u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
  41         u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
  42         u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
  43         u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
  44         u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8);
  45         u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8);
  46         u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4);
  47         u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4);
  48
  49         /* Input clocks for primary dividers */
  50         u32 clk_a, clk_b;
  51
  52         if (pllc & 0x40000000){
  53                 u32 m;
  54
  55                 /* Feedback path */
  56                 switch ((pllc >> 24) & 7){
  57                 case 0:
  58                         /* PLLOUTx */
  59                         m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
  60                         break;
  61                 case 1:
  62                         /* CPU */
  63                         m = fwdva * pradv0;
  64                         break;
  65                 case 5:
  66                         /* PERClk */
  67                         m = fwdvb * prbdv0 * opbdv0 * perdv0;
  68                         break;
  69                 default:
  70                         printk(KERN_EMERG "invalid PLL feedback source\n");
  71                         goto bypass;
  72                 }
  73                 m *= fbdv;
  74                 p->vco = sys_clk * m;
  75                 clk_a = p->vco / fwdva;
  76                 clk_b = p->vco / fwdvb;
  77         }
  78         else {
  79 bypass:
  80                 /* Bypass system PLL */
  81                 p->vco = 0;
  82                 clk_a = clk_b = sys_clk;
  83         }
  84
  85         p->cpu = clk_a / pradv0;
  86         p->plb = clk_b / prbdv0;
  87         p->opb = p->plb / opbdv0;
  88         p->ebc = p->opb / perdv0;
  89
  90         /* UARTs clock */
  91         if (uart0 & 0x00800000)
  92                 p->uart0 = ser_clk;
  93         else
  94                 p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256);
  95
  96         if (uart1 & 0x00800000)
  97                 p->uart1 = ser_clk;
  98         else
  99                 p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
 100 #ifdef CONFIG_440EP
 101         if (uart2 & 0x00800000)
 102                 p->uart2 = ser_clk;
 103         else
 104                 p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
 105
 106         if (uart3 & 0x00800000)
 107                 p->uart3 = ser_clk;
 108         else
 109                 p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
 110 #endif
 111 }
 112
 113 /* Issue L2C diagnostic command */
 114 static inline u32 l2c_diag(u32 addr)
 115 {
 116         mtdcr(DCRN_L2C0_ADDR, addr);
 117         mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG);
 118         while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
 119         return mfdcr(DCRN_L2C0_DATA);
 120 }
 121
 122 static irqreturn_t l2c_error_handler(int irq, void* dev)
 123 {
 124         u32 sr = mfdcr(DCRN_L2C0_SR);
 125         if (sr & L2C_SR_CPE){
 126                 /* Read cache trapped address */
 127                 u32 addr = l2c_diag(0x42000000);
 128                 printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr);
 129         }
 130         if (sr & L2C_SR_TPE){
 131                 /* Read tag trapped address */
 132                 u32 addr = l2c_diag(0x82000000) >> 16;
 133                 printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr);
 134         }
 135
 136         /* Clear parity errors */
 137         if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
 138                 mtdcr(DCRN_L2C0_ADDR, 0);
 139                 mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
 140         } else
 141                 printk(KERN_EMERG "L2C: LRU error\n");
 142
 143         return IRQ_HANDLED;
 144 }
 145
 146 /* Enable L2 cache */
 147 void __init ibm440gx_l2c_enable(void){
 148         u32 r;
 149         unsigned long flags;
 150
 151         /* Install error handler */
 152         if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
 153                 printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
 154                 return;
 155         }
 156
 157         local_irq_save(flags);
 158         asm volatile ("sync" ::: "memory");
 159
 160         /* Disable SRAM */
 161         mtdcr(DCRN_SRAM0_DPC,   mfdcr(DCRN_SRAM0_DPC)   & ~SRAM_DPC_ENABLE);
 162         mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
 163         mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
 164         mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
 165         mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
 166
 167         /* Enable L2_MODE without ICU/DCU */
 168         r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
 169         r |= L2C_CFG_L2M | L2C_CFG_SS_256;
 170         mtdcr(DCRN_L2C0_CFG, r);
 171
 172         mtdcr(DCRN_L2C0_ADDR, 0);
 173
 174         /* Hardware Clear Command */
 175         mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC);
 176         while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
 177
 178         /* Clear Cache Parity and Tag Errors */
 179         mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
 180
 181         /* Enable 64G snoop region starting at 0 */
 182         r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
 183         r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
 184         mtdcr(DCRN_L2C0_SNP0, r);
 185
 186         r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
 187         r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
 188         mtdcr(DCRN_L2C0_SNP1, r);
 189
 190         asm volatile ("sync" ::: "memory");
 191
 192         /* Enable ICU/DCU ports */
 193         r = mfdcr(DCRN_L2C0_CFG);
 194         r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI
 195                 | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
 196         r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
 197                 | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
 198         mtdcr(DCRN_L2C0_CFG, r);
 199
 200         asm volatile ("sync; isync" ::: "memory");
 201         local_irq_restore(flags);
 202 }
 203
 204 /* Disable L2 cache */
 205 void __init ibm440gx_l2c_disable(void){
 206         u32 r;
 207         unsigned long flags;
 208
 209         local_irq_save(flags);
 210         asm volatile ("sync" ::: "memory");
 211
 212         /* Disable L2C mode */
 213         r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU);
 214         mtdcr(DCRN_L2C0_CFG, r);
 215
 216         /* Enable SRAM */
 217         mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE);
 218         mtdcr(DCRN_SRAM0_SB0CR,
 219               SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
 220         mtdcr(DCRN_SRAM0_SB1CR,
 221               SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
 222         mtdcr(DCRN_SRAM0_SB2CR,
 223               SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
 224         mtdcr(DCRN_SRAM0_SB3CR,
 225               SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
 226
 227         asm volatile ("sync; isync" ::: "memory");
 228         local_irq_restore(flags);
 229 }
 230
 231 void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
 232 {
 233         /* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
 234            enable it on all other revisions
 235          */
 236         if (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. A") == 0 ||
 237                         strcmp(cur_cpu_spec->cpu_name, "440GX Rev. B") == 0
 238                         || (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C")
 239                                 == 0 && p->cpu > 667000000))
 240                 ibm440gx_l2c_disable();
 241         else
 242                 ibm440gx_l2c_enable();
 243 }
 244
 245 int __init ibm440gx_get_eth_grp(void)
 246 {
 247         return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT;
 248 }
 249
 250 void __init ibm440gx_set_eth_grp(int group)
 251 {
 252         SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT));
 253 }
 254
 255 void __init ibm440gx_tah_enable(void)
 256 {
 257         /* Enable TAH0 and TAH1 */
 258         SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
 259                         ~DCRN_SDR_MFR_TAH0);
 260         SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
 261                         ~DCRN_SDR_MFR_TAH1);
 262 }
 263
 264 int ibm440gx_show_cpuinfo(struct seq_file *m){
 265
 266         u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG);
 267         const char* s;
 268         if (l2c_cfg & L2C_CFG_L2M){
 269             switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){
 270                 case L2C_CFG_ICU: s = "I-Cache only";    break;
 271                 case L2C_CFG_DCU: s = "D-Cache only";    break;
 272                 default:          s = "I-Cache/D-Cache"; break;
 273             }
 274         }
 275         else
 276             s = "disabled";
 277
 278         seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s,
 279             l2c_cfg, mfdcr(DCRN_L2C0_SR));
 280
 281         return 0;
 282 }
 283
 284 void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
 285                                    unsigned long r5, unsigned long r6,
 286                                    unsigned long r7)
 287 {
 288         /* Erratum 440_43 workaround, disable L1 cache parity checking */
 289         if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
 290             !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
 291                 mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
 292
 293         ibm44x_platform_init(r3, r4, r5, r6, r7);
 294 }