Linux 2.6.25-rc4
[linux-2.6/next.git] / arch / x86 / pci / visws.c
blobc2df4e97eed6ea4d66a971811471e03a3c3ddaa9
1 /*
2 * Low-Level PCI Support for SGI Visual Workstation
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
7 #include <linux/kernel.h>
8 #include <linux/pci.h>
9 #include <linux/init.h>
11 #include "cobalt.h"
12 #include "lithium.h"
14 #include "pci.h"
16 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
17 static void pci_visws_disable_irq(struct pci_dev *dev) { }
19 int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
20 void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
22 void __init pcibios_penalize_isa_irq(int irq, int active) {}
25 unsigned int pci_bus0, pci_bus1;
27 static inline u8 bridge_swizzle(u8 pin, u8 slot)
29 return (((pin - 1) + slot) % 4) + 1;
32 static u8 __init visws_swizzle(struct pci_dev *dev, u8 *pinp)
34 u8 pin = *pinp;
36 while (dev->bus->self) { /* Move up the chain of bridges. */
37 pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
38 dev = dev->bus->self;
40 *pinp = pin;
42 return PCI_SLOT(dev->devfn);
45 static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
47 int irq, bus = dev->bus->number;
49 pin--;
51 /* Nothing useful at PIIX4 pin 1 */
52 if (bus == pci_bus0 && slot == 4 && pin == 0)
53 return -1;
55 /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
56 if (bus == pci_bus0 && slot == 4 && pin == 3) {
57 irq = CO_IRQ(CO_APIC_PIIX4_USB);
58 goto out;
61 /* First pin spread down 1 APIC entry per slot */
62 if (pin == 0) {
63 irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
64 CO_APIC_PCIA_BASE0) + slot);
65 goto out;
68 /* lines 1,2,3 from any slot is shared in this twirly pattern */
69 if (bus == pci_bus1) {
70 /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
71 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
72 } else { /* bus == pci_bus0 */
73 /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
74 if (slot == 0)
75 slot = 3; /* same pattern */
76 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
78 out:
79 printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
80 return irq;
83 void __init pcibios_update_irq(struct pci_dev *dev, int irq)
85 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
88 static int __init pcibios_init(void)
90 /* The VISWS supports configuration access type 1 only */
91 pci_probe = (pci_probe | PCI_PROBE_CONF1) &
92 ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
94 pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
95 pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
97 printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
98 "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
100 raw_pci_ops = &pci_direct_conf1;
101 pci_scan_bus_with_sysdata(pci_bus0);
102 pci_scan_bus_with_sysdata(pci_bus1);
103 pci_fixup_irqs(visws_swizzle, visws_map_irq);
104 pcibios_resource_survey();
105 return 0;
108 subsys_initcall(pcibios_init);