arch/blackfin/include/asm/dpmc.h

   1 /*
   2  * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
   3  *
   4  * Copyright (C) 2004-2009 Analog Device Inc.
   5  *
   6  * Licensed under the GPL-2
   7  */
   8
   9 #ifndef _BLACKFIN_DPMC_H_
  10 #define _BLACKFIN_DPMC_H_
  11
  12 #include <mach/pll.h>
  13
  14 /* PLL_CTL Masks */
  15 #define DF                      0x0001  /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
  16 #define PLL_OFF                 0x0002  /* PLL Not Powered */
  17 #define STOPCK                  0x0008  /* Core Clock Off */
  18 #define PDWN                    0x0020  /* Enter Deep Sleep Mode */
  19 #ifdef __ADSPBF539__
  20 # define IN_DELAY               0x0014  /* Add 200ps Delay To EBIU Input Latches */
  21 # define OUT_DELAY              0x00C0  /* Add 200ps Delay To EBIU Output Signals */
  22 #else
  23 # define IN_DELAY               0x0040  /* Add 200ps Delay To EBIU Input Latches */
  24 # define OUT_DELAY              0x0080  /* Add 200ps Delay To EBIU Output Signals */
  25 #endif
  26 #define BYPASS                  0x0100  /* Bypass the PLL */
  27 #define MSEL                    0x7E00  /* Multiplier Select For CCLK/VCO Factors */
  28 #define SPORT_HYST              0x8000  /* Enable Additional Hysteresis on SPORT Input Pins */
  29 #define SET_MSEL(x)             (((x)&0x3F) << 0x9)     /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
  30
  31 /* PLL_DIV Masks */
  32 #define SSEL                    0x000F  /* System Select */
  33 #define CSEL                    0x0030  /* Core Select */
  34 #define CSEL_DIV1               0x0000  /* CCLK = VCO / 1 */
  35 #define CSEL_DIV2               0x0010  /* CCLK = VCO / 2 */
  36 #define CSEL_DIV4               0x0020  /* CCLK = VCO / 4 */
  37 #define CSEL_DIV8               0x0030  /* CCLK = VCO / 8 */
  38
  39 #define CCLK_DIV1 CSEL_DIV1
  40 #define CCLK_DIV2 CSEL_DIV2
  41 #define CCLK_DIV4 CSEL_DIV4
  42 #define CCLK_DIV8 CSEL_DIV8
  43
  44 #define SET_SSEL(x)     ((x) & 0xF)     /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
  45 #define SCLK_DIV(x)     (x)             /* SCLK = VCO / x */
  46
  47 /* PLL_STAT Masks */
  48 #define ACTIVE_PLLENABLED       0x0001  /* Processor In Active Mode With PLL Enabled */
  49 #define FULL_ON                 0x0002  /* Processor In Full On Mode */
  50 #define ACTIVE_PLLDISABLED      0x0004  /* Processor In Active Mode With PLL Disabled */
  51 #define PLL_LOCKED              0x0020  /* PLL_LOCKCNT Has Been Reached */
  52
  53 #define RTCWS                   0x0400  /* RTC/Reset Wake-Up Status */
  54 #define CANWS                   0x0800  /* CAN Wake-Up Status */
  55 #define USBWS                   0x2000  /* USB Wake-Up Status */
  56 #define KPADWS                  0x4000  /* Keypad Wake-Up Status */
  57 #define ROTWS                   0x8000  /* Rotary Wake-Up Status */
  58 #define GPWS                    0x1000  /* General-Purpose Wake-Up Status */
  59
  60 /* VR_CTL Masks */
  61 #if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
  62 #define FREQ                    0x3000  /* Switching Oscillator Frequency For Regulator */
  63 #define FREQ_1000               0x3000  /* Switching Frequency Is 1 MHz */
  64 #else
  65 #define FREQ                    0x0003  /* Switching Oscillator Frequency For Regulator */
  66 #define FREQ_333                0x0001  /* Switching Frequency Is 333 kHz */
  67 #define FREQ_667                0x0002  /* Switching Frequency Is 667 kHz */
  68 #define FREQ_1000               0x0003  /* Switching Frequency Is 1 MHz */
  69 #endif
  70 #define HIBERNATE               0x0000  /* Powerdown/Bypass On-Board Regulation */
  71
  72 #define GAIN                    0x000C  /* Voltage Level Gain */
  73 #define GAIN_5                  0x0000  /* GAIN = 5 */
  74 #define GAIN_10                 0x0004  /* GAIN = 1 */
  75 #define GAIN_20                 0x0008  /* GAIN = 2 */
  76 #define GAIN_50                 0x000C  /* GAIN = 5 */
  77
  78 #define VLEV                    0x00F0  /* Internal Voltage Level */
  79 #ifdef __ADSPBF52x__
  80 #define VLEV_085                0x0040  /* VLEV = 0.85 V (-5% - +10% Accuracy) */
  81 #define VLEV_090                0x0050  /* VLEV = 0.90 V (-5% - +10% Accuracy) */
  82 #define VLEV_095                0x0060  /* VLEV = 0.95 V (-5% - +10% Accuracy) */
  83 #define VLEV_100                0x0070  /* VLEV = 1.00 V (-5% - +10% Accuracy) */
  84 #define VLEV_105                0x0080  /* VLEV = 1.05 V (-5% - +10% Accuracy) */
  85 #define VLEV_110                0x0090  /* VLEV = 1.10 V (-5% - +10% Accuracy) */
  86 #define VLEV_115                0x00A0  /* VLEV = 1.15 V (-5% - +10% Accuracy) */
  87 #define VLEV_120                0x00B0  /* VLEV = 1.20 V (-5% - +10% Accuracy) */
  88 #else
  89 #define VLEV_085                0x0060  /* VLEV = 0.85 V (-5% - +10% Accuracy) */
  90 #define VLEV_090                0x0070  /* VLEV = 0.90 V (-5% - +10% Accuracy) */
  91 #define VLEV_095                0x0080  /* VLEV = 0.95 V (-5% - +10% Accuracy) */
  92 #define VLEV_100                0x0090  /* VLEV = 1.00 V (-5% - +10% Accuracy) */
  93 #define VLEV_105                0x00A0  /* VLEV = 1.05 V (-5% - +10% Accuracy) */
  94 #define VLEV_110                0x00B0  /* VLEV = 1.10 V (-5% - +10% Accuracy) */
  95 #define VLEV_115                0x00C0  /* VLEV = 1.15 V (-5% - +10% Accuracy) */
  96 #define VLEV_120                0x00D0  /* VLEV = 1.20 V (-5% - +10% Accuracy) */
  97 #define VLEV_125                0x00E0  /* VLEV = 1.25 V (-5% - +10% Accuracy) */
  98 #define VLEV_130                0x00F0  /* VLEV = 1.30 V (-5% - +10% Accuracy) */
  99 #endif
 100
 101 #define WAKE                    0x0100  /* Enable RTC/Reset Wakeup From Hibernate */
 102 #define CANWE                   0x0200  /* Enable CAN Wakeup From Hibernate */
 103 #define PHYWE                   0x0400  /* Enable PHY Wakeup From Hibernate */
 104 #define GPWE                    0x0400  /* General-Purpose Wake-Up Enable */
 105 #define MXVRWE                  0x0400  /* Enable MXVR Wakeup From Hibernate */
 106 #define KPADWE                  0x1000  /* Keypad Wake-Up Enable */
 107 #define ROTWE                   0x2000  /* Rotary Wake-Up Enable */
 108 #define CLKBUFOE                0x4000  /* CLKIN Buffer Output Enable */
 109 #define SCKELOW                 0x8000  /* Do Not Drive SCKE High During Reset After Hibernate */
 110
 111 #if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
 112 #define USBWE                   0x0200  /* Enable USB Wakeup From Hibernate */
 113 #else
 114 #define USBWE                   0x0800  /* Enable USB Wakeup From Hibernate */
 115 #endif
 116
 117 #ifndef __ASSEMBLY__
 118
 119 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 120 void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 121 void do_hibernate(int wakeup);
 122 void set_dram_srfs(void);
 123 void unset_dram_srfs(void);
 124
 125 #define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
 126
 127 #ifdef CONFIG_CPU_FREQ
 128 #define CPUFREQ_CPU 0
 129 #endif
 130 struct bfin_dpmc_platform_data {
 131         const unsigned int *tuple_tab;
 132         unsigned short tabsize;
 133         unsigned short vr_settling_time; /* in us */
 134 };
 135
 136 #endif
 137
 138 #endif  /*_BLACKFIN_DPMC_H_*/